@article{WuzellaMahendranKandelbauer2020,
  author    = {Wuzella, G{\"u}nter and Mahendran, Arunjunai Raj and Kandelbauer, Andreas},
  title     = {Green composite material made from Typha latifolia fibres bonded with an epoxidized linseed oil/tall oil-based polyamide binder system},
  journal   = {Journal of renewable materials},
  volume    = {8},
  number    = {5},
  issn      = {2164-6325},
  doi       = {10.32604/jrm.2020.09615},
  institution = {Life Sciences},
  pages     = {499 -- 512},
  year      = {2020},
  abstract  = {Here, we report the mechanical and water sorption properties of a green composite based on Typha latifolia fibres. The composite was prepared either completely binder-less or bonded with 10\% (w/w) of a bio-based resin which was a mixture of an epoxidized linseed oil and a tall-oil based polyamide. The flexural modulus of elasticity, the flexural strength and the water absorption of hot pressed Typha panels were measured and the influence of pressing time and panel density on these properties was investigated. The cure kinetics of the biobased resin was analyzed by differential scanning calorimetry (DSC) in combination with the iso-conversional kinetic analysis method of Vyazovkin to derive the curing conditions required for achieving completely cured resin. For the binderless Typha panels the best technological properties were achieved for panels with high density. By adding 10\% of the binder resin the flexural strength and especially the water absorption were improved significantly.},
  language  = {en}
}