Informatik
Refine
Document Type
- Conference proceeding (114)
- Journal article (28)
- Book chapter (22)
- Anthology (8)
- Book (1)
Is part of the Bibliography
- yes (173)
Institute
- Informatik (173)
Publisher
- Springer (173) (remove)
In our initial DaMoN paper, we set out the goal to revisit the results of “Starring into the Abyss [...] of Concurrency Control with [1000] Cores” (Yu in Proc. VLDB Endow 8: 209-220, 2014). Against their assumption, today we do not see single-socket CPUs with 1000 cores. Instead, multi-socket hardware is prevalent today and in fact offers over 1000 cores. Hence, we evaluated concurrency control (CC) schemes on a real (Intel-based) multi-socket platform. To our surprise, we made interesting findings opposing results of the original analysis that we discussed in our initial DaMoN paper. In this paper, we further broaden our analysis, detailing the effect of hardware and workload characteristics via additional real hardware platforms (IBM Power8 and 9) and the full TPC-C transaction mix. Among others, we identified clear connections between the performance of the CC schemes and hardware characteristics, especially concerning NUMA and CPU cache. Overall, we conclude that no CC scheme can efficiently make use of large multi-socket hardware in a robust manner and suggest several directions on how CC schemes and overall OLTP DBMS should evolve in future.
The basic idea behind a wearable robotic grasp assistancesystem is to support people that suffer from severe motor impairments in daily activities. Such a system needs to act mostly autonomously and according to the user’s intent. Vision-based hand pose estimation could be an integral part of a larger control and assistance framework. In this paper we evaluate the performance of egocentric monocular hand pose estimation for a robot-controlled hand exoskeleton in a simulation. For hand pose estimation we adopt a Convolutional Neural Network (CNN). We train and evaluate this network with computer graphics, created by our own data generator. In order to guide further design decisions we focus in our experiments on two egocentric camera viewpoints tested on synthetic data with the help of a 3D-scanned hand model, with and without an exoskeleton attached to it.We observe that hand pose estimation with a wrist-mounted camera performs more accurate than with a head-mounted camera in the context of our simulation. Further, a grasp assistance system attached to the hand alters visual appearance and can improve hand pose estimation. Our experiment provides useful insights for the integration of sensors into a context sensitive analysis framework for intelligent assistance.
Additive Manufacturing is increasingly used in the industrial sector as a result of continuous development. In the Production Planning and Control (PPC) system, AM enables an agile response in the area of detailed and process planning, especially for a large number of plants. For this purpose, a concept for a PPC system for AM is presented, which takes into account the requirements for integration into the operational enterprise software system. The technical applicability will be demonstrated by individual implemented sections. The presented solution approach promises a more efficient utilization of the plants and a more elastic use.
Due to the consequential impact of technological breakdowns, companies have to be prepared to deal with breakdowns or even better prevent them. In today's information technology, several methods and tools exist to downscale this concern. Therefore, this paper deals with the initial determination of a resilient enterprise architecture supporting predictive maintenance in the information technology domain and furthermore, concerns several mechanisms on how to reactively and proactively secure the state of resiliency on several abstraction levels. The objective of this paper is to give an overview on existing mechanisms for resiliency and to describe the foundation of an optimized approach, combining infrastructure and process mining techniques.
Context
Web APIs are one of the most used ways to expose application functionality on the Web, and their understandability is important for efficiently using the provided resources. While many API design rules exist, empirical evidence for the effectiveness of most rules is lacking.
Objective
We therefore wanted to study 1) the impact of RESTful API design rules on understandability, 2) if rule violations are also perceived as more difficult to understand, and 3) if demographic attributes like REST-related experience have an influence on this.
Method
We conducted a controlled Web-based experiment with 105 participants, from both industry and academia and with different levels of experience. Based on a hybrid between a crossover and a between-subjects design, we studied 12 design rules using API snippets in two complementary versions: one that adhered to a rule and one that was a violation of this rule. Participants answered comprehension questions and rated the perceived difficulty.
Results
For 11 of the 12 rules, we found that violation performed significantly worse than rule for the comprehension tasks. Regarding the subjective ratings, we found significant differences for 9 of the 12 rules, meaning that most violations were subjectively rated as more difficult to understand. Demographics played no role in the comprehension performance for violation.
Conclusions
Our results provide first empirical evidence for the importance of following design rules to improve the understandability of Web APIs, which is important for researchers, practitioners, and educators.
While several service-based maintainability metrics have been proposed in the scientific literature, reliable approaches to automatically collect these metrics are lacking. Since static analysis is complicated for decentralized and technologically diverse microservice-based systems, we propose a dynamic approach to calculate such metrics from runtime data via distributed tracing. The approach focuses on simplicity, extensibility, and broad applicability. As a first prototype, we implemented a Java application with a Zipkin integrator, 23 different metrics, and five export formats. We demonstrated the feasibility of the approach by analyzing the runtime data of an example microservice based system. During an exploratory study with six participants, 14 of the 18 services were invoked via the system’s web interface. For these services, all metrics were calculated correctly from the generated traces.
Software evolvability is an important quality attribute, yet one difficult to grasp. A certain base level of it is allegedly provided by service- and microservice-based systems, but many software professionals lack systematic understanding of the reasons and preconditions for this. We address this issue via the proxy of architectural modifiability tactics. By qualitatively mapping principles and patterns of Service Oriented Architecture (SOA) and microservices onto tactics and analyzing the results, we cannot only generate insights into service-oriented evolution qualities, but can also provide a modifiability comparison of the two popular service-based architectural styles. The results suggest that both SOA and microservices possess several inherent qualities beneficial for software evolution. While both focus strongly on loose coupling and encapsulation, there are also differences in the way they strive for modifiability (e.g. governance vs. evolutionary design). To leverage the insights of this research, however, it is necessary to find practical ways to incorporate the results as guidance into the software development process.
While many maintainability metrics have been explicitly designed for service-based systems, tool-supported approaches to automatically collect these metrics are lacking. Especially in the context of microservices, decentralization and technological heterogeneity may pose challenges for static analysis. We therefore propose the modular and extensible RAMA approach (RESTful API Metric Analyzer) to calculate such metrics from machine-readable interface descriptions of RESTful services. We also provide prototypical tool support, the RAMA CLI, which currently parses the formats OpenAPI, RAML, and WADL and calculates 10 structural service-based metrics proposed in scientific literature. To make RAMA measurement results more actionable, we additionally designed a repeatable benchmark for quartile-based threshold ranges (green, yellow, orange, red). In an exemplary run, we derived thresholds for all RAMA CLI metrics from the interface descriptions of 1,737 publicly available RESTful APIs. Researchers and practitioners can use RAMA to evaluate the maintainability of RESTful services or to support the empirical evaluation of new service interface metrics.
Gamification is one of the recognized methods of motivating people in various life processes, and it has spread to many spheres of life, including healthcare. This article proposes a system design for long-term care patients using the method mentioned. The proposed system aims to increase patient engagement in the treatment and rehabilitation process via gamification. Literature research on available and earlier proposed systems was conducted to develop a suited system design. The primary target group includes bedridden patients and a sedentary lifestyle (predominantly lying in bed). One of the main criteria for selecting a suitable option was its contactless realization for the mentioned target groups in long-term care cases. As a result, we developed the system design for hardware and software that could prevent bedsores and other health problems from occurring because of low activity. The proposed design can be tested in hospitals, nursing homes, and rehabilitation centers.
Public transport maps are typically designed in a way to support route finding tasks for passengers, while they also provide an overview about stations, metro lines, and city-specific attractions. Most of those maps are designed as a static representation, maybe placed in a metro station or printed in a travel guide. In this paper, we describe a dynamic, interactive public transport map visualization enhanced by additional views for the dynamic passenger data on different levels of temporal granularity. Moreover, we also allow extra statistical information in form of density plots, calendar-based visualizations, and line graphs. All this information is linked to the contextual metro map to give a viewer insights into the relations between time points and typical routes taken by the passengers. We also integrated a graph-based view on user-selected routes, a way to interactively compare those routes, an attribute- and property-driven automatic computation of specific routes for one map as well as for all available maps in our repertoire, and finally, also the most important sights in each city are included as extra information to include in a user-selected route. We illustrate the usefulness of our interactive visualization and map navigation system by applying it to the railway system of Hamburg in Germany while also taking into account the extra passenger data. As another indication for the usefulness of the interactively enhanced metro maps we conducted a controlled user experiment with 20 participants.
A configuration-management-database driven approach for fabric-process specification and automation
(2014)
In this paper we describe an approach that integrates a Configuration- Management-Database into fabric-process specification and automation in order to consider different conditions regarding to cloud-services. By implementing our approach, the complexity of fabric processes gets reduced. We developed a prototype by using formal prototyping principles as research methods and integrated the Configuration-Management-Database Command into the Workflow- Management-System Activiti. We used this prototype to evaluate our approach. We implemented three different fabric-processes and show that by using our approach the complexity of these three fabric-processes gets reduced.
The digital transformation is today’s dominant business transformation having a strong influence on how digital services and products are designed in a service-dominant way. A popular underlying theory of value creation and economic exchange that is known as the service-dominant (S-D) logic can be connected to many successful digital business models. However, S-D logic by itself is abstract. Companies cannot directly use it as an instrument for business model innovation and design in an easy way. To address this a comprehensive ideation method based on S-D logic is proposed, called service-dominant design (SDD). SDD is aimed at supporting firms in the transition to a service- and value-oriented perspective. The method provides a simplified way to structure the ideation process based on four model components. Each component consists of practical implications, auxiliary questions and visualization techniques that were derived from a literature review, a use case evaluation of digital mobility and a focus group discussion. SDD represents a first step of having a toolset that can support established companies in the process of service- and value-orientation as part of their digital transformation efforts.
Die digitale Transformation ist die heute vorherrschende geschäftliche Transformation, die einen starken Einfluss darauf hat, wie digitale Dienstleistungen und Produkte dienstleistungsdominant gestaltet werden. Eine beliebte zugrundeliegende Theorie der Wertschöpfung und des wirtschaftlichen Austauschs, die als dienstleistungsdominante Logik (S-D) bekannt ist, kann mit vielen erfolgreichen digitalen Geschäftsmodellen verbunden werden. Allerdings ist die S-D-Logik an sich abstrakt. Unternehmen können sie nicht ohne Weiteres als Instrument für die Innovation und Gestaltung von Geschäftsmodellen nutzen. Um dies zu ändern, wird eine umfassende Ideenfindungsmethode auf der Grundlage der S-D-Logik vorgeschlagen, die als service-dominantes Design (SDD) bezeichnet wird. SDD zielt darauf ab, Unternehmen beim Übergang zu einer service- und wertorientierten Perspektive zu unterstützen. Die Methode bietet eine vereinfachte Möglichkeit, den Ideenfindungsprozess auf der Grundlage von vier Modellkomponenten zu strukturieren. Jede Komponente besteht aus praktischen Implikationen, Hilfsfragen und Visualisierungstechniken, die aus einer Literaturrecherche, einer Anwendungsfallbewertung der digitalen Mobilität und einer Fokusgruppendiskussion abgeleitet wurden. SDD ist ein erster Schritt zu einem Toolset, das etablierte Unternehmen bei der Service- und Werteorientierung im Rahmen ihrer digitalen Transformation unterstützen kann.
Autonomous navigation is one of the main areas of research in mobile robots and intelligent connected vehicles. In this context, we are interested in presenting a general view on robotics, the progress of research, and advanced methods related to this field to improve autonomous robots’ localization. We seek to evaluate algorithms and techniques that give robots the ability to move safely and autonomously in a complex and dynamic environment. Under these constraints, we focused our work in the paper on a specific problem: to evaluate a simple, fast and light SLAM algorithm that can minimize localization errors. We presented and validated a FastSLAM 2.0 system combining scan matching and loop closure detection. To allow the robot to perceive the environment and detect objects, we have studied one of the best deep learning technique using convolutional neural networks (CNN). We validate our testing using the YOLOv3 algorithm.
Power line communications (PLC) reuse the existing power-grid infrastructure for the transmission of data signals. As power line the communication technology does not require a dedicated network setup, it can be used to connect a multitude of sensors and Internet of Things (IoT) devices. Those IoT devices could be deployed in homes, streets, or industrial environments for sensing and to control related applications. The key challenge faced by future IoT-oriented narrowband PLC networks is to provide a high quality of service (QoS). In fact, the power line channel has been traditionally considered too hostile. Combined with the fact that spectrum is a scarce resource and interference from other users, this requirement calls for means to increase spectral efficiency radically and to improve link reliability. However, the research activities carried out in the last decade have shown that it is a suitable technology for a large number of applications. Motivated by the relevant impact of PLC on IoT, this paper proposed a cooperative spectrum allocation in IoT-oriented narrowband PLC networks using an iterative water-filling algorithm.
The digitization of factories will be a significant issue for the 2020s. New scenarios are emerging to increase the efficiency of production lines inside the factory, based on a new generation of robots’ collaborative functions. Manufacturers are moving towards data-driven ecosystems by leveraging product lifecycle data from connected goods. Energy-efficient communication schemes, as well as scalable data analytics, will support these various data collection scenarios. With augmented reality, new remote services are emerging that facilitate the efficient sharing of knowledge in the factory. Future communication solutions should generally ensure connectivity between the various production sites spread worldwide and new players in the value chain (e.g., suppliers, logistics) transparent, real-time, and secure. Industry 4.0 brings more intelligence and flexibility to production. Resulting in more lightweight equipment and, thus, offering better ergonomics. 5G will guarantee real-time transmissions with latencies of less than 1 ms. This will provide manufacturers with new possibilities to collect data and trigger actions automatically.
An autonomous vehicle is a robotic vehicle with decision and action capability capable of performing assigned tasks without or with minimal human intervention. Autonomous cars have been in development for many years. The Society of Automotive Engineers (SAE International) published in 2014 a classification in five levels of driving automation, with level 0 corresponding to completely manual driving, and level 5 to an ideal dream where the vehicle would be able to navigate entirely autonomously for all missions and in all environments. This work addressed the navigation of an autonomous vehicle in general. We focus on one of the most complex scenarios of the road network and crossing of road intersections. In this paper, the critical features of autonomous intelligent vehicles are reviewed. Furthermore, the associated problems are presented, and the most advanced solutions are derived. This article aims to allow a novice in this field to understand the different facets of localization and perception problems for autonomous vehicles.
Rotating machinery occupies a predominant place in many industrial applications. However, rotating machines are often encountered with severe vibration problems. The measurement of these machines’ vibrations signal is of particular importance since it plays a crucial role in predictive maintenance. When the vibrations are too high, they often cause fatigue failure. They announce an unexpected stop or break and, consequently, a significant loss of productivity or an attack on the personnel’s safety. Therefore, fault identification at early stages will significantly enhance the machine’s health and significantly reduce maintenance costs. Although considerable efforts have been made to master the field of machine diagnostics, the usual signal processing methods still present several drawbacks. This paper examines the rotating machinery condition monitoring in the time and frequency domains. It also provides a framework for the diagnosis process based on machine learning by analyzing the vibratory signals.
In today’s education, healthcare, and manufacturing sectors, organizations and information societies are discussing new enhancements to corporate structure and process efficiency using digital platforms. These enhancements can be achieved using digital tools. Industry 5.0 and Society 5.0 give several potentials for businesses to enhance the adaptability and efficacy of their industrial processes, paving the door for developing new business models facilitated by digital platforms. Society 5.0 can contribute to a super-intelligent society that includes the healthcare industry. In the past decade, the Internet of Things, Big Data Analytics, Neural Networks, Deep Learning, and Artificial Intelligence (AI) have revolutionized our approach to various job sectors, from manufacturing and finance to consumer products. AI is developing quickly and efficiently. We have heard of the latest artificial intelligence chatbot, ChatGPT. OpenAI created this, which has taken the internet by storm. We tested the effectiveness of a considerable language model referred to as ChatGPT on four critical questions concerning “Society 5.0”, “Healthcare 5.0”, “Industry,” and “Future Education” from the perspectives of Age 5.0.
Personalized remote healthcare monitoring is in continuous development due to the technology improvements of sensors and wearable electronic systems. A state of the art of research works on wearable sensors for healthcare applications is presented in this work. Furthermore, a state of the art of wearable devices, chest and wrist band and smartwatches available on the market for health and sport monitoring is presented in this paper. Many activity trackers are commercially available. The prices are continuously reducing and the performances are improving, but commercial devices do not provide raw data and are therefore not useful for research purposes.
Introduction to the special issue on self‑managing and hardware‑optimized database systems 2022
(2023)
Data management systems have evolved in terms of functionality, performance characteristics, complexity, and variety during the last 40 years. Particularly, the relational database management systems and the big data systems (e.g., Key-Value stores, Document stores, Graph stores and Graph Computation Systems, Spark, MapReduce/Hadoop, or Data Stream Processing Systems) have evolved with novel additions and extensions. However, the systems administration and tasks have become highly complex and expensive, especially given the simultaneous and rapid hardware evolution in processors, memory, storage, or networking. These developments present new open problems and challenges to data management systems as well as new opportunities.
The SMDB (International Workshop on Self-Managing Database Systems) and HardBD&Active (Joint International Workshop on Big Data Management on Emerging Hardware and Data Management on Virtualized Active Systems) workshops organized in conjunction with the IEEE ICDE (International Conference on Data Engineering) offered two distinct platforms for examining the above system-related challenges from different perspectives. The SMDB workshop looks into developing autonomic or self-* features in database and data management systems to tackle complex administrative tasks, while the HardBD&Active workshop focuses on harnessing hardware technologies to enhance efficiency and performance of data processing and management tasks. As a result of these workshops, we are delighted to present the third special issue of DAPD titled “Self-Managing and Hardware-Optimized Database Systems 2022,” which showcases the best contributions from the SMDB 2021/2022 and HardBD&Active 2021/2022 workshops.
Sleep is an important aspect in life of every human being. The average sleep duration for an adult is approximately 7 h per day. Sleep is necessary to regenerate physical and psychological state of a human. A bad sleep quality has a major impact on the health status and can lead to different diseases. In this paper an approach will be presented, which uses a long-term monitoring of vital data gathered by a body sensor during the day and the night supported by mobile application connected to an analyzing system, to estimate sleep quality of its user as well as give recommendations to improve it in real-time. Actimetry and historical data will be used to improve the individual recommendations, based on common techniques used in the area of machine learning and big data analysis.
Stress is becoming an important topic in modern life. The influence of stress results in a higher rate of health disorders such as burnout, heart problems, obesity, asthma, diabetes, depressions and many others. Furthermore individual’s behavior and capabilities could be directly affected leading to altered cognition, inappropriate decision making and problem solving skills. In a dynamic and unpredictable environment, such as automotive, this can result in a higher risk for accidents. Different papers faced the estimation as well as prediction of drivers’ stress level during driving. Another important question is not only the stress level of the driver himself, but also the influence on and of a group of other drivers in the near area. This paper proposes a system, which determines a group of drivers in a near area as clusters and it derives the individual stress level. This information will be analyzed to generate a stress map, which represents a graphical view about road section with a higher stress influence. Aggregated data can be used to generate navigation routes with a lower stress influence to decrease stress influenced driving as well as improve road safety.
Sleep quality and in general, behavior in bed can be detected using a sleep state analysis. These results can help a subject to regulate sleep and recognize different sleeping disorders. In this work, a sensor grid for pressure and movement detection supporting sleep phase analysis is proposed. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this project is a non invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable actigraphy devices tends to be uncomfortable. Besides this fact, they are also very expensive. The system represented in this work classifies respiration and body movement with only one type of sensor and also in a non invasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed the potential for classification of breathing rate and body movements. Although previous researches show the use of pressure sensors in recognizing posture and breathing, they have been mostly used by positioning the sensors between the mattress and bedsheet. This project however, shows an innovative way to position the sensors under the mattress.
In many cases continuous monitoring of vital signals is required and low intrusiveness is an important requirement. Incorporating monitoring systems in the hospital or home bed could have benefits for patients and caregivers. The objective of this work is the definition of a measurement protocol and the creation of a data set of measurements using commercial and low-cost prototypes devices to estimate heart rate and breathing rate. The experimental data will be used to compare results achieved by the devices and to develop algorithms for feature extraction of vital signals.
The recovery of our body and brain from fatigue directly depends on the quality of sleep, which can be determined from the results of a sleep study. The classification of sleep stages is the first step of this study and includes the measurement of vital data and their further processing. The non-invasive sleep analysis system is based on a hardware sensor network of 24 pressure sensors providing sleep phase detection. The pressure sensors are connected to an energy-efficient microcontroller via a system-wide bus. A significant difference between this system and other approaches is the innovative way in which the sensors are placed under the mattress. This feature facilitates the continuous use of the system without any noticeable influence on the sleeping person. The system was tested by conducting experiments that recorded the sleep of various healthy young people. Results indicate the potential to capture respiratory rate and body movement.
The main aim of presented in this manuscript research is to compare the results of objective and subjective measurement of sleep quality for older adults (65+) in the home environment. A total amount of 73 nights was evaluated in this study. Placing under the mattress device was used to obtain objective measurement data, and a common question on perceived sleep quality was asked to collect the subjective sleep quality level. The achieved results confirm the correlation between objective and subjective measurement of sleep quality with the average standard deviation equal to 2 of 10 possible quality points.
Identifikation von Schlaf- und Wachzuständen durch die Auswertung von Atem- und Bewegungssignalen
(2021)
Fragestellung: Das klinische Standardverfahren und Referenz der Schlafmessung und der Klassifizierung der einzelnen Schlafstadien ist die Polysomnographie (PSG). Alternative Ansätze zu diesem aufwändigen Verfahren könnten einige Vorteile bieten, wenn die Messungen auf eine komfortablere Weise durchgeführt werden. Das Hauptziel dieser Forschung Studie ist es, einen Algorithmus für die automatische Klassifizierung von Schlafstadien zu entwickeln, der ausschließlich Bewegungs- und Atmungssignale verwendet [1].
Patienten und Methoden: Nach der Analyse der aktuellen Forschungsarbeiten haben wir multinomiale logistische Regression als Grundlage für den Ansatz gewählt [2]. Um die Genauigkeit der Auswertung zu erhöhen, wurden vier Features entwickelt, die aus Bewegungs- und Atemsignalen abgeleitet wurden. Für die Auswertung wurden die nächtlichen Aufzeichnungen von 35 Personen verwendet, die von der Charité-Universitätsmedizin Berlin zur Verfügung gestellt wurden. Das Durchschnittsalter der Teilnehmer betrug 38,6 +/– 14,5 Jahre und der BMI lag bei durchschnittlich 24,4 +/– 4,9 kg/m2. Da der Algorithmus mit drei Stadien arbeitet, wurden die Stadien N1, N2 und N3 zum NREM-Stadium zusammengeführt. Der verfügbare Datensatz wurde strikt aufgeteilt: in einen Trainingsdatensatz von etwa 100 h und in einen Testdatensatz mit etwa 160 h nächtlicher Aufzeichnungen. Beide Datensätze wiesen ein ähnliches Verhältnis zwischen Männern und Frauen auf, und der durchschnittliche BMI wies keine signifikante Abweichung auf.
Ergebnisse: Der Algorithmus wurde implementiert und lieferte erfolgreiche Ergebnisse: die Genauigkeit der Erkennung von Wach-/NREM-/REM-Phasen liegt bei 73 %, mit einem Cohen’s Kappa von 0,44 für die analysierten 19.324 Schlafepochen von jeweils 30 s. Die beobachtete gewisse Überschätzung der NREM-Phase lässt sich teilweise durch ihre Prävalenz in einem typischen Schlafmuster erklären. Selbst die Verwendung eines ausbalancierten Trainingsdatensatzes konnte dieses Problem nicht vollständig lösen.
Schlussfolgerungen: Die erreichten Ergebnisse haben die Tauglichkeit des Ansatzes prinzipiell bestätigt. Dieser hat den Vorteil, dass nur Bewegungs- und Atemsignale verwendet werden, die mit weniger Aufwand und komfortabler für Benutzer aufgezeichnet werden können als z. B. Herz- oder EEG-Signale. Daher stellt das neue System eine deutliche Verbesserung im Vergleich zu bestehenden Ansätzen dar. Die Zusammenführung der beschriebenen algorithmischen Software mit dem in [1] beschriebenen Hardwaresystem zur Messung von Atem- und Körperbewegungssignalen zu einem autonomen, berührungslosen System zur kontinuierlichen Schlafüberwachung ist eine mögliche Richtung zukünftiger Arbeiten.
Recognition of sleep and wake states is one of the relevant parts of sleep analysis. Performing this measurement in a contactless way increases comfort for the users. We present an approach evaluating only movement and respiratory signals to achieve recognition, which can be measured non-obtrusively. The algorithm is based on multinomial logistic regression and analyses features extracted out of mentioned above signals. These features were identified and developed after performing fundamental research on characteristics of vital signals during sleep. The achieved accuracy of 87% with the Cohen’s kappa of 0.40 demonstrates the appropriateness of a chosen method and encourages continuing research on this topic.
The scoring of sleep stages is one of the essential tasks in sleep analysis. Since a manual procedure requires considerable human and financial resources, and incorporates some subjectivity, an automated approach could result in several advantages. There have been many developments in this area, and in order to provide a comprehensive overview, it is essential to review relevant recent works and summarise the characteristics of the approaches, which is the main aim of this article. To achieve it, we examined articles published between 2018 and 2022 that dealt with the automated scoring of sleep stages. In the final selection for in-depth analysis, 125 articles were included after reviewing a total of 515 publications. The results revealed that automatic scoring demonstrates good quality (with Cohen's kappa up to over 0.80 and accuracy up to over 90%) in analysing EEG/EEG + EOG + EMG signals. At the same time, it should be noted that there has been no breakthrough in the quality of results using these signals in recent years. Systems involving other signals that could potentially be acquired more conveniently for the user (e.g. respiratory, cardiac or movement signals) remain more challenging in the implementation with a high level of reliability but have considerable innovation capability. In general, automatic sleep stage scoring has excellent potential to assist medical professionals while providing an objective assessment.
In recent decades, it can be observed that a steady increase in the volume of tourism is a stable trend. To offer travel opportunities to all groups, it is also necessary to prepare offers for people in need of long-term care or people with disabilities. One of the ways to improve accessibility could be digital technologies, which could help in planning as well as in carrying out trips. In the work presented, a study of barriers was first conducted, which led to selecting technologies for a test setup after analysis. The main focus was on a mobile app with travel information and 360° tours. The evaluation results showed that both technologies could increase accessibility, but some essential aspects (such as usability, completeness, relevance, etc.) need to be considered when implementing them.
Based on well-established robotic concepts of autonomous localization and navigation we present a system prototype to assist camera-based indoor navigation for human utilization implemented in the Robot Operating System (ROS). Our prototype takes advantage of state-of-the-art computer vision and robotic methods. Our system is designed for assistive indoor guidance. We employ a vibro tactile belt to serve as a guiding device to render derived motion suggestions to the user via vibration patterns. We evaluated the effectiveness of a variety of vibro-tactile feedback patterns for guidance of blindfolded users. Our prototype demonstrates that a vision-based system can support human navigation, and may also assist the visually impaired in a human-centered way.
Software startups often make assumptions about the problems and customers they are addressing as well as the market and the solutions they are developing. Testing the right assumptions early is a means to mitigate risks. Approaches such as Lean Startup foster this kind of testing by applying experimentation as part of a constant build-measure-learn feedback loop. The existing research on how software startups approach experimentation is very limited. In this study, we focus on understanding how software startups approach experimentation and identify challenges and advantages with respect to conducting experiments. To achieve this, we conducted a qualitative interview study. The initial results show that startups often spent a disproportionate amount of time focusing on creating solutions without testing critical assumptions. Main reasons are the lack of awareness, that these assumptions can be tested early and a lack of knowledge and support on how to identify, prioritize and test these assumptions. However, startups understand the need for testing risky assumptions and are open to conducting experiments.
In recent years, the parallel computing community has shown increasing interest in leveraging cloud resources for executing parallel applications. Clouds exhibit several fundamental features of economic value, like on-demand resource provisioning and a pay-per-use model. Additionally, several cloud providers offer their resources with significant discounts; however, possessing limited availability. Such volatile resources are an auspicious opportunity to reduce the costs arising from computations, thus achieving higher cost efficiency. In this paper, we propose a cost model for quantifying the monetary costs of executing parallel applications in cloud environments, leveraging volatile resources. Using this cost model, one is able to determine a configuration of a cloud-based parallel system that minimizes the total costs of executing an application.
The proposed approach applies current unsupervised clustering approaches in a different dynamic manner. Instead of taking all the data as input and finding clusters among them, the given approach clusters Holter ECG data (longterm electrocardiography data from a holter monitor) on a given interval which enables a dynamic clustering approach (DCA). Therefore advanced clustering techniques based on the well known Dynamic TimeWarping algorithm are used. Having clusters e.g. on a daily basis, clusters can be compared by defining cluster shape properties. Doing this gives a measure for variation in unsupervised cluster shapes and may reveal unknown changes in healthiness. Embedding this approach into wearable devices offers advantages over the current techniques. On the one hand users get feedback if their ECG data characteristic changes unforeseeable over time which makes early detection possible. On the other hand cluster properties like biggest or smallest cluster may help a doctor in making diagnoses or observing several patients. Further, on found clusters known processing techniques like stress detection or arrhythmia classification may be applied.
Back to the future: origins and directions of the “Agile Manifesto” – views of the originators
(2018)
In 2001, seventeen professionals set up the manifesto for agile software development. They wanted to define values and basic principles for better software development. On top of brought into focus, the manifesto has been widely adopted by developers, in software-developing organizations and outside the world of IT. Agile principles and their implementation in practice have paved the way for radical new and innovative ways of software and product development. In parallel, the understanding of the manifesto’s underlying principles evolved over time. This, in turn, may affect current and future applications of agile principles. This article presents results from a survey and an interview study in collaboration with the original contributors of the manifesto for agile software development. Furthermore, it comprises the results from a workshop with one of the original authors. This publication focuses on the origins of the manifesto, the contributors’ views from today’s perspective, and their outlook on future directions. We evaluated 11 responses from the survey and 14 interviews to understand the viewpoint of the contributors. They emphasize that agile methods need to be carefully selected and agile should not be seen as a silver bullet. They underline the importance of considering the variety of different practices and methods that had an influence on the manifesto. Furthermore, they mention that people should question their current understanding of "agile" and recommend reconsidering the core ideas of the manifesto.
Context: The current transformation of automotive development towards innovation, permanent learning and adapting to changes are directing various foci on the integration of agile methods. Although, there have been efforts to apply agile methods in the automotive domain for many years, a wide-spread adoption has not yet taken place.
Goal: This study aims to gain a better understanding of the forces that prevent the adoption of agile methods.
Method: Survey based on 16 semi-structured interviews from the automotive domain. The results are analyzed by means of thematic coding.
Results: Forces that prevent agile adoption are mainly of organizational, technical and social nature and address inertia, anxiety and context factors. Key challenges in agile adoption are related to transforming organizational structures and culture, achieving faster software release cycles without loss of quality, the importance of software reuse in combination with agile practices, appropriate quality assurance measures, and the collaboration with suppliers and other disciplines such as mechanics.
Conclusion: Significant challenges are imposed by specific characteristics of the automotive domain such as high quality requirements and many interfaces to surrounding rigid and inflexible processes. Several means are identified that promise to overcome these challenges.
Context: The current situation and future scenarios of the automotive domain require a new strategy to develop high quality software in a fast pace. In the automotive domain, it is assumed that a combination of agile development practices and software product lines is beneficial, in order to be capable to handle high frequency of improvements. This assumption is based on the understanding that agile methods introduce more flexibility in short development intervals. Software product lines help to manage the high amount of variants and to improve quality by reuse of software for long term development.
Goal: This study derives a better understanding of the expected benefits for a combination. Furthermore, it identifies the automotive specific challenges that prevent the adoption of agile methods within the software product line.
Method: Survey based on 16 semi structured interviews from the automotive domain, an internal workshop with 40 participants and a discussion round on ESE congress 2016. The results are analyzed by means of thematic coding.
Context: Software product lines are widely used in automotive embedded software development. This software paradigm improves the quality of software variants by reuse. The combination of agile software development practices with software product lines promises a faster delivery of high quality software. However, the set up of an agile software product line is still challenging, especially in the automotive domain. Goal: This publication aims to evaluate to what extend agility fits to automotive product line engineering. Method: Based on previous work and two workshops, agility is mapped to software product line concerns. Results: This publication presents important principles of software product lines, and examines how agile approaches fit to those principles. Additionally, the principles are related to one of the four major concerns of software product line engineering: Business, Architecture, Process, and Organization. Conclusion: Agile software product line engineering is promising and can add value to existing development approaches. The identified commonalities and hindering factors need to be considered when defining a combined agile product line engineering approach.
Due to digitalization, constant technological progress and ever shorter product life cycles, enterprises are currently facing major challenges. In order to succeed in the market, business models have to be adapted more often and more quickly to changing market conditions than they used to be. Fast adaptability, also called agility, is a decisive competitive factor in today’s world. Because of the ever-growing IT part of products and the fact that they are manufactured using IT, changing the business model has a major impact on the enterprise architecture (EA). However, developing EAs is a very complex task, because many stakeholders with conflicting interests are involved in the decision-making process. Therefore, a lot of collaboration is required. To support organizations in developing their EA, this article introduces a novel integrative method that systematically integrates stakeholder interests into decision-making activities. By using the method, collaboration between stakeholders involved is improved by identifying points of contact between them. Furthermore, standardized activities make decision-making more transparent and comparable without limiting creativity.
Die Digitalisierung, der ständige technologische Fortschritt und immer kürzere Produktlebenszyklen stellen Unternehmen derzeit vor große Herausforderungen. Um am Markt erfolgreich zu sein, müssen Geschäftsmodelle häufiger und schneller als früher an veränderte Marktbedingungen angepasst werden. Schnelle Anpassungsfähigkeit, auch Agilität genannt, ist in der heutigen Zeit ein entscheidender Wettbewerbsfaktor. Aufgrund des ständig wachsenden IT-Anteils von Produkten und der Tatsache, dass diese mit Hilfe von IT hergestellt werden, hat die Änderung des Geschäftsmodells große Auswirkungen auf die Unternehmensarchitektur (EA). Die Entwicklung von EAs ist jedoch eine sehr komplexe Aufgabe, da viele Beteiligte mit gegensätzlichen Interessen in den Entscheidungsprozess eingebunden sind. Daher ist ein hohes Maß an Zusammenarbeit erforderlich. Um Unternehmen bei der Entwicklung ihrer EA zu unterstützen, wird in diesem Artikel eine neuartige integrative Methode vorgestellt, die die Interessen der Stakeholder systematisch in die Entscheidungsfindung einbezieht. Durch die Anwendung der Methode wird die Zusammenarbeit zwischen den beteiligten Interessengruppen verbessert, indem Berührungspunkte zwischen ihnen identifiziert werden. Darüber hinaus machen die standardisierten Aktivitäten die Entscheidungsfindung transparenter und vergleichbarer, ohne die Kreativität einzuschränken.
In times of dynamic markets, enterprises have to be agile to be able to quickly react to market influences. Due to the increasing digitization of products, the enterprise IT often is affected when business models change. Enterprise Architecture Management (EAM) targets a holistic view of the enterprise’ IT and their relations to the business. However, Enterprise Architectures (EA) are complex structures consisting of many layers, artifacts and relationships between them. Thus, analyzing EA is a very complex task for stakeholders. Visualizations are common vehicles to support analysis. However, in practice visualization capabilities lack flexibility and interactivity. A solution to improve the support of stakeholders in analyzing EAs might be the application of visual analytics. Starting from a systematic literature review, this article investigates the features of visual analytics relevant for the context of EAM.
Companies are continuously changing their strategy, processes, and information systems to benefit from the digital transformation. Controlling the digital architecture and governance is the fundamental goal. Enterprise Governance, Risk and Compliance (GRC) systems are vital for managing digital risks threatening in modern enterprises from many different angles. The most significant constituent to GRC systems is the definition of controls that is implemented on different layers of a digital Enterprise Architecture (EA). As part of the compliant aspect of GRC, the effectiveness of these controls is assessed and reported to relevant management bodies within the enterprise. In this paper, we present a metamodel which links controls to the affected elements of a digital EA and supplies a way of expressing associated assessment techniques and results. We complement a metamodel with an expository instantiation of a control compliance cockpit in an international insurance enterprise.
New or adapted digital business models have huge impacts on Enterprise Architectures (EA) and require them to become more agile, flexible, and adaptable. All these changes are happening frequently and are currently not well documented. An EA consists of a lot of elements with manifold relationships between them. Thus changing the business model may have multiple impacts on other architectural elements. The EA engineering process deals with the development, change and optimization of architectural elements and their dependencies. Thus an EA provides a holistic view for both business and IT from the perspective of many stakeholders, which are involved in EA decision-making processes. Different stakeholders have specific concerns and are collaborating today in often unclear decision-making processes. In our research we are investigating information from collaborative decision-making processes to support stakeholders in taking current decisions. In addition we provide all information necessary to understand how and why decisions were taken. We are collecting the decision-related information automatically to minimize manual time intensive work as much as possible. The core contribution of our research extends a decisional metamodel, which links basic decisions with architectural elements and extends them with an associated decisional case context. Our aim is to support a new integral method for multi perspective and collaborative decision-making processes. We illustrate this by a practice-relevant decision-making scenario for Enterprise Architecture Engineering.
Purpose
Context awareness in the operating room (OR) is important to realize targeted assistance to support actors during surgery. A situation recognition system (SRS) is used to interpret intraoperative events and derive an intraoperative situation from these. To achieve a modular system architecture, it is desirable to de-couple the SRS from other system components. This leads to the need of an interface between such an SRS and context-aware systems (CAS). This work aims to provide an open standardized interface to enable loose coupling of the SRS with varying CAS to allow vendor-independent device orchestrations.
Methods
A requirements analysis investigated limiting factors that currently prevent the integration of CAS in today's ORs. These elicited requirements enabled the selection of a suitable base architecture. We examined how to specify this architecture with the constraints of an interoperability standard. The resulting middleware was integrated into a prototypic SRS and our system for intraoperative support, the OR-Pad, as exemplary CAS for evaluating whether our solution can enable context-aware assistance during simulated orthopedical interventions.
Results
The emerging Service-oriented Device Connectivity (SDC) standard series was selected to specify and implement a middleware for providing the interpreted contextual information while the SRS and CAS are loosely coupled. The results were verified within a proof of concept study using the OR-Pad demonstration scenario. The fulfillment of the CAS’ requirements to act context-aware, conformity to the SDC standard series, and the effort for integrating the middleware in individual systems were evaluated. The semantically unambiguous encoding of contextual information depends on the further standardization process of the SDC nomenclature. The discussion of the validity of these results proved the applicability and transferability of the middleware.
Conclusion
The specified and implemented SDC-based middleware shows the feasibility of loose coupling an SRS with unknown CAS to realize context-aware assistance in the OR.
The focus of the developed maturity model was set on processes. The concept of the widespread CMM and its practices has been transferred to the perioperative domain and the concept of the new maturity model. Additional optimization goals and technological as well as networking-specific aspects enable a process- and object-focused view of the maturity model in order to ensure broad coverage of different subareas. The evaluation showed that the model is applicable to the perioperative field. Adjustments and extensions of the maturity model are future steps to improve the rating and classification of the new maturity model.