Refine
Year of publication
- 2017 (302) (remove)
Document Type
- Conference proceeding (122)
- Journal article (104)
- Book chapter (32)
- Book (28)
- Patent / Standard / Guidelines (6)
- Working Paper (5)
- Doctoral Thesis (2)
- Anthology (1)
- Issue of a journal (1)
- Review (1)
Is part of the Bibliography
- yes (302)
Institute
- ESB Business School (96)
- Informatik (88)
- Technik (58)
- Texoversum (33)
- Life Sciences (26)
Publisher
- Springer (53)
- Hochschule Reutlingen (29)
- IEEE (27)
- Elsevier (18)
- Gesellschaft für Informatik e.V (16)
- Association for Computing Machinery (8)
- Universität Tübingen (8)
- Shaker Verlag (7)
- VDE Verlag (7)
- Wiley (6)
We present a new methodology for automatic selection and sizing of analog circuits demonstrated on the OTA circuit class. The methodology consists of two steps: a generic topology selection method supported by a “part-sizing” process and subsequent final sizing. The circuit topologies provided by a reuse library are classified in a topology tree. The appropriate topology is selected by traversing the topology tree starting at the root node. The decision at each node is gained from the result of the part-sizing, which is in fact a node-specific set of simulations. The final sizing is a simulation-based optimization. We significantly reduce the overall simulation effort compared to a classical simulation-based optimization by combining the topology selection with the part-sizing process in the selection loop. The result is an interactive user friendly system, which eases the analog designer’s work significantly when compared to typical industrial practice in analog circuit design. The topology selection method and sizing process are implemented as a tool into a typical analog design environment. The design productivity improvement achievable by our method is shown by a comparison to other design automation approaches.
A new method for the analysis of movement dependent parasitics in full custom designed MEMS sensors
(2017)
Due to the lack of sophisticated microelectromechanical systems (MEMS) component libraries, highly optimized MEMS sensors are currently designed using a polygon driven design flow. The strength of this design flow is the accurate mechanical simulation of the polygons by finite element (FE) modal analysis. The result of the FE-modal analysis is included in the system model together with the data of the (mechanical) static electrostatic analysis. However, the system model lacks the dynamic parasitic electrostatic effects, arising from the electric coupling between the wiring and the moving structures. In order to include these effects in the system model, we present a method which enables the quasi dynamic parasitic extraction with respect to in-plane movements of the sensor structures. The method is embedded in the polygon driven MEMS design flow using standard EDA tools. In order to take the influences of the fabrication process into account, such as etching process variations, the method combines the FE-modal analysis and the fabrication process simulation data. This enables the analysis of dynamic changing electrostatic parasitic effects with respect to movements of the mechanical structures. Additionally, the result can be included into the system model allowing the simulation of positive feedback of the electrostatic parasitic effects to the mechanical structures.
This paper introduces a novel placement methodology for a common-centroid (CC) pattern generator. It can be applied to various integrated circuit (IC) elements, such as transistors, capacitors, diodes, and resistors. The proposed method consists of a constructive algorithm which generates an initial, close to the optimum, solution, and an iterative algorithm which is used subsequently, if the output of constructive algorithm does not satisfy the desired criteria. The outcome of this work is an automatic CC placement algorithm for IC element arrays. Additionally, the paper presents a method for the CC arrangement evaluation. It allows for evaluating the quality of an array, and a comparison of different placement methods.
A novel configuration of the dual active bridge (DAB) DC/DC converter is presented, enabling more efficient wide voltage range conversion at light loads. A third phase leg as well as a center tapped transformer are introduced to one side of the converter. This concept provides two different turn ratios, thus extending the zero voltage switching operation resulting in higher efficiency. A laboratory prototype was built converting an input voltage of 40V to an output voltage in the range of 350V to 650V. Measurements show a significant increase up to 20% in the efficiency for light-load operation.
Modern power semiconductor devices have low capacitances and can therefore achieve very fast switching transients under hard-switching conditions. However, these transients are often limited by parasitic elements, especially by the source inductance and the parasitic capacitances of the power semiconductor. These limitations cannot be compensated by conventional gate drivers. To overcome this, a novel gate driver approach for power semiconductors was developed. It uses a transformer which accelerates the switching by transferring energy from the source path to the gate path.
Experimental results of the novel gate driver approach show a turn-on energy reduction of 78% (from 80 μJ down to 17 μJ) with a drain-source voltage of 500V and a drain current of 60 A. Furthermore, the efficiency improvement is demonstrated for a hard-switching boost converter. For a switching frequency of 750 kHz with an input voltage of 230V and an output voltage of 400V, it was possible to extend the output power range by 35%(from 2.3kW to 3.1 kW), due to the reduction of the turn-on losses, therefore lowering the junction temperature of the GaN-HEMT.
This work presents a spiral antenna array, which can be used in the V- and W-Band. An array equipped with Dolph-Chebychev coefficients is investigated to address issues related to the low gain and side lobe level of the radiating structure. The challenges encountered in this achievement are to provide an antenna that is not only good matched but also presents an appreciable effective bandwidth at the frequency bands of interest. Its radiation properties including the effective bandwidth and the gain are analyzed for the W-Band.
Multilevel-cell (MLC) flash is commonly deployed in today’s high density NAND memories, but low latency and high reliability requirements make it barely used in automotive embedded flash applications. This paper presents a time domain voltage sensing scheme that applies a dynamic voltage ramp at the cells’ control gate (CG) in order to achieve fast and reliable sensing suitable for automotive applications.
Sleep quality and in general, behavior in bed can be detected using a sleep state analysis. These results can help a subject to regulate sleep and recognize different sleeping disorders. In this work, a sensor grid for pressure and movement detection supporting sleep phase analysis is proposed. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this project is a non invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable actigraphy devices tends to be uncomfortable. Besides this fact, they are also very expensive. The system represented in this work classifies respiration and body movement with only one type of sensor and also in a non invasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed the potential for classification of breathing rate and body movements. Although previous researches show the use of pressure sensors in recognizing posture and breathing, they have been mostly used by positioning the sensors between the mattress and bedsheet. This project however, shows an innovative way to position the sensors under the mattress.
The demonstration project Virtual Power Plant Neckar-Alb is constructing a Virtual Power Plant (VPP) demonstration site at the Reutlingen University campus. The VPP demonstrator integrates a heterogeneous set of distributed energy resources (DERs) which are connected to control the infrastructure and an energy management system. This paper describes the components and the architecture of the demonstrator and presents strategies for demonstration of multiple optimization and control systems with different control paradigms.
Die weiterhin hohen Schulden in einigen Staaten der Europäischen Wirtschafts- und Währungsunion lassen nach wie vor staatliche Insolvenzen befürchten. Um die entstandenen Probleme zu bewältigen, aber auch damit eine solche Situation erst gar nicht eintritt, hält der Autor eine staatliche Insovenzordnung – mit Bail-out durch die anderen Mitgliedstaaten nur in Notfällen – für erforderlich. Er schlägt einen staatlichen Abwicklungsmechanismus für überschuldete Euro-Länder vor, der auf einem Konzept des Sachverständigenrates für Wirtschaft von 2016 beruht.