Refine
Year of publication
- 2017 (122) (remove)
Document Type
- Conference proceeding (122) (remove)
Is part of the Bibliography
- yes (122) (remove)
Institute
- Informatik (72)
- Technik (31)
- ESB Business School (14)
- Texoversum (5)
Publisher
- IEEE (24)
- Hochschule Reutlingen (20)
- Gesellschaft für Informatik (16)
- Springer (11)
- ACM (8)
- Association for Information Systems (AIS) (5)
- Università Politecnica delle Marche (4)
- Technische Universität Berlin (3)
- Deutsche Gesellschaft für Computer- und Roboterassistierte Chirurgie e. V. (2)
- Duncker & Humblot (2)
Anforderungen an die Mensch-Maschine-Schnittstelle im Automobil auf dem Weg zum autonomen Fahren
(2017)
In den letzten Jahrzehnten haben immer mehr Fahrerassistenzsysteme Einzug in das Automobil gefunden und bereiten damit den Weg zu vollautonomen Fahrzeugen der Zukunft vor. So bieten bereits viele Hersteller Ausstattungsvarianten ihrer Fahrzeuge an, die für den Umstieg in die vollautonome Zukunft gewappnet sind. Um den Menschen mit auf den Weg zu nehmen, werden einige Anforderungen an die Mensch-Maschine-Schnittstelle (MMS) des Automobils gestellt. Für die teilautonomen Fahrzeuge der nächsten Generation gilt es, den Fahrerwechsel zwischen manuellem und autonomen Fahren für die Menschen bestmöglich zu gestalten. Die Arbeit wirft einen Blick auf ausgewählte Ansätze für zukünftige MMS-Systeme und bewertet diese anhand der Übergabezeiten zwischen Mensch und Maschine. Ein Wandel der MMS im Automobil wird empfohlen, um den Menschen mit den neuen Technologien vertraut zu machen.
In der Medizin existieren verschiedene Reifegradmodelle, die die Digitalisierung von Krankenhäusern unterstützen können. Die Anforderungen an ein Reifegradmodell für diesen Zweck umfassen Aspekte aus allgemeinen und spezifischen Bereichen des Krankenhauses. Die Analyse der Reifegradmodelle HIN, CCMM, EMRAM und O-EMRAM zeigt große Lücken im Bereich des OP sowie fehlende Aspekte in der Notaufnahme auf. Ein umfassendes Reifegradmodell wurde nicht gefunden. Durch eine Kombination aus HIN und CCMM könnten fast alle Bereiche ausreichend abgedeckt werden. Zusätzliche Ergänzungen durch spezialisierte Reifegradmodelle oder sogar die Entwicklung eines umfassenden Reifegradmodells wären sinnvoll.
Die Arbeit stellt die Möglichkeiten von 3D-Controllern für den Einsatz in der interventionellen Radiologie und insbesondere für die Steuerung der Echtzeit-Magnetresonanztomographie (MRT) dar. Dies ist interessant in Bezug auf die kontrollierte Navigation in ein Zielgewebe. Dabei kann der Interventionalist durch Echtzeit- Bildgebung den Verlauf des Eingriffs verfolgen, allerdings kann er bisher das MRT während der Durchführung des Eingriffs nicht selbst steuern, da dies durch den Assistenten im Nebenraum erfolgt. Die Kommunikation ist bei dem hohen Geräuschpegel aber sehr schwer. Diese Arbeit setzt an dieser Stelle an und analysiert 3D-Controller auf die Eignung für die Echtzeit-Steuerung eines MRTs. Dabei wurden trackingbasierte und trackinglose Geräte betrachtet. Als Ergebnis ließ sich festhalten, dass trackingbasierte Verfahren weniger geeignet sind, aufgrund der nicht ausreichenden Interpretation der Eingaben. Die trackinglosen Geräte hingegen sind aufgrund der korrekten Interpretation aller Eingaben und der intuitiven Bedienung geeignet.
Gallium nitride high electron mobility transistors (GaN-HEMTs) have low capacitances and can achieve low switching losses in applications where hard turn-on is required. Low switching losses imply a fast switching; consequently, fast voltage and current transients occur. However, these transients can be limited by package and layout parasitics even for highly optimized systems. Furthermore, a fast switching requires a fast charging of the input capacitance, hence a high gate current.
In this paper, the switching speed limitations of GaN-HEMTs due to the common source inductance and the gate driver supply voltage are discussed. The turn-on behavior of a GaN-HEMT is simulated and the impact of the parasitics and the gate driver supply voltage on the switching losses is described in detail. Furthermore, measurements are performed with an optimized layout for a drain-source voltage of 500 V and a drain-source current up to 60 A.
The demonstration project Virtual Power Plant Neckar-Alb is constructing a Virtual Power Plant (VPP) demonstration site at the Reutlingen University campus. The VPP demonstrator integrates a heterogeneous set of distributed energy resources (DERs) which are connected to control the infrastructure and an energy management system. This paper describes the components and the architecture of the demonstrator and presents strategies for demonstration of multiple optimization and control systems with different control paradigms.
Sleep quality and in general, behavior in bed can be detected using a sleep state analysis. These results can help a subject to regulate sleep and recognize different sleeping disorders. In this work, a sensor grid for pressure and movement detection supporting sleep phase analysis is proposed. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this project is a non invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable actigraphy devices tends to be uncomfortable. Besides this fact, they are also very expensive. The system represented in this work classifies respiration and body movement with only one type of sensor and also in a non invasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed the potential for classification of breathing rate and body movements. Although previous researches show the use of pressure sensors in recognizing posture and breathing, they have been mostly used by positioning the sensors between the mattress and bedsheet. This project however, shows an innovative way to position the sensors under the mattress.
Multilevel-cell (MLC) flash is commonly deployed in today’s high density NAND memories, but low latency and high reliability requirements make it barely used in automotive embedded flash applications. This paper presents a time domain voltage sensing scheme that applies a dynamic voltage ramp at the cells’ control gate (CG) in order to achieve fast and reliable sensing suitable for automotive applications.
This work presents a spiral antenna array, which can be used in the V- and W-Band. An array equipped with Dolph-Chebychev coefficients is investigated to address issues related to the low gain and side lobe level of the radiating structure. The challenges encountered in this achievement are to provide an antenna that is not only good matched but also presents an appreciable effective bandwidth at the frequency bands of interest. Its radiation properties including the effective bandwidth and the gain are analyzed for the W-Band.
Modern power semiconductor devices have low capacitances and can therefore achieve very fast switching transients under hard-switching conditions. However, these transients are often limited by parasitic elements, especially by the source inductance and the parasitic capacitances of the power semiconductor. These limitations cannot be compensated by conventional gate drivers. To overcome this, a novel gate driver approach for power semiconductors was developed. It uses a transformer which accelerates the switching by transferring energy from the source path to the gate path.
Experimental results of the novel gate driver approach show a turn-on energy reduction of 78% (from 80 μJ down to 17 μJ) with a drain-source voltage of 500V and a drain current of 60 A. Furthermore, the efficiency improvement is demonstrated for a hard-switching boost converter. For a switching frequency of 750 kHz with an input voltage of 230V and an output voltage of 400V, it was possible to extend the output power range by 35%(from 2.3kW to 3.1 kW), due to the reduction of the turn-on losses, therefore lowering the junction temperature of the GaN-HEMT.
A novel configuration of the dual active bridge (DAB) DC/DC converter is presented, enabling more efficient wide voltage range conversion at light loads. A third phase leg as well as a center tapped transformer are introduced to one side of the converter. This concept provides two different turn ratios, thus extending the zero voltage switching operation resulting in higher efficiency. A laboratory prototype was built converting an input voltage of 40V to an output voltage in the range of 350V to 650V. Measurements show a significant increase up to 20% in the efficiency for light-load operation.