Refine
Year of publication
- 2017 (24) (remove)
Document Type
- Conference proceeding (24) (remove)
Language
- English (24) (remove)
Has full text
- yes (24)
Is part of the Bibliography
- yes (24)
Institute
- Technik (19)
- Informatik (4)
- ESB Business School (1)
Publisher
- IEEE (24) (remove)
The success of an autonomous robotic system is influenced by several interdependent factors not easily identifiable. This paper is set to lay the foundation of a new integrated approach in order to deeply examine all the parameters and understand their contribution to success. After introducing the problem, two cutting edge autonomous systems for the process of unloading of containers will be presented. Then the STIC analysis, a recently developed method for modelling and interpreting all the parameters, will be introduced. The preliminary results of applying such a methodology to a first study case, based on one of the two systems available to the authors, will be shortly presented. Future research is in the end recommended in order to prove that this methodology is the only way to efficiently and effectively mitigate the risk that stops potential users from investing in autonomous systems in the logistics sector.
In the present paper we demonstrate the novel technique to apply the recently proposed approach of In-Place Appends – overwrites on Flash without a prior erase operation. IPA can be applied selectively: only to DB-objects that have frequent and relatively small updates. To do so we couple IPA to the concept of NoFTL regions, allowing the DBA to place update-intensive DB-objects into special IPA-enabled regions. The decision about region configuration can be (semi-)automated by an advisor analyzing DB-log files in the background.
We showcase a Shore-MT based prototype of the above approach, operating on real Flash hardware. During the demonstration we allow the users to interact with the system and gain hands-on experience under different demonstration scenarios.
In this work we investigate the behavior of MIS- and Schottky-gate AlGaN/GaN HEMTs under high-power pulsestress. A special setup capable of applying pulses of constant power is used to evaluate the electro-thermal response in different operating points. For both types of devices, the time to failure was found to decrease with increasing drain-source voltage. Overall, the Schottky-gate device displays a higher pulse robustness. The pulse withstand time of the MIS-gate device is limited by the occurrence of a thermal instability at approximately 240°C while the Schottky-gate device displays a rapid increase of the gate leakage current prior to failure. The mechanism responsible for this gate current is further investigated by static and transient temperature measurements and yielded activation energies of 0.6 eV and 0.84 eV.
In a digitally controlled slope shaping system, reliable detection of both voltage and current slope is required to enable a closed-loop control for various power switches independent of system parameters. In most state-of-the-art works, this is realized by monitoring the absolute voltage and current values. Better accuracy at lower DC power loss is achieved by sensing techniques for a reliable passive detection, which is achieved through avoiding DC paths from the high voltage network into the sensing network. Using a high-speed analog-to-digital converter, the whole waveform of the transient derivative can be stored digitally and prepared for a predictive cycle-by-cycle regulation, without requiring high-precision digital differentiation algorithms. To gain an accurate representation of the voltage and current derivative waveforms, system parasitics are investigated and classified in three sections: (1) component parasitics, which are identified by s-parameter measurements and extraction of equivalent circuit models, (2) PCB design issues related to the sensing circuit, and (3) interconnections between adjacent boards.
The contribution of this paper is an optimized sensing network on the basis of the experimental study supporting fast transition slopes up to 100 V/ns and 1 A/ns and beyond, making the sensing technique attractive for slope shaping of fast switching devices like modern generation IGBTs, CoolMOSTM and SiC mosfets. Measurements of the optimized dv/dt and di/dt setups are demonstrated for a hard switched IGBT power stage.
This paper presents a control strategy for optimal utilization of photovoltaic (PV) generated power in conjunction with an Energy Storage System (ESS). The ESS is specifically designed to be retrofitted into existing PV systems in an end-user application. It can be attached in parallel to the PV system and connects to existing DC/AC inverters. In particular, the study covers the impact such a modification has on the output power of existing PV panels. A distinct degradation of PV output power was found due to the different power characteristics of PV panel and ESS. To overcome such degradation a novel feedback system is proposed. The feedback system continuously modifies the power characteristic of the ESS to match the PV panel and thus achieves optimal power utilization. Impact on PV and power point tracking performance is analyzed. Simulation of the proposed system is performed in MATLAB/Simulink. The results are found to be satisfactory.
In any autonomous driving system, the map for localization plays a vital part that is often underestimated. The map describes the world around the vehicle outside of the sensor view and is a main input into the decision making process in highly complicated scenarios. Thus there are strict requirements towards the accuracy and timeliness of the map. We present a robust and reliable approach towards crowd based mapping using a GraphSLAM framework based on radar sensors. We show on a parking lot that even in dynamically changing environments, the localization results are very accurate and reliable even in unexplored terrain without any map data. This can be achieved by collaborative map updates from multiple vehicles. To show these claims experimentally, the Joint Graph Optimization is compared to the ground truth on an industrial parking space. Mapping performance is evaluated using a dense map from a total station as reference and localization results are compared with a deeply coupled DGPS/INS system.
Incubators in multinational corporations : development of a corporate incubator operator model
(2017)
This paper analyzes the components of a corporate incubator operator model in multinational companies. Thereby, three relevant phases were identified: pre incubation, incubation, and exit. Each phase contains different criteria that represent critical success factors for a corporate incubator, which are based on theoretical findings and lessons learned from practice. During the pre-incubation phase companies should define their need for a corporate incubator, the origin of ideas and the selection criteria for incubator tenants. The actual phase of incubation refers to the incubator program, which should be flexible with respect to each tenant. Furthermore, resource allocation plays an important role during the incubator program. Exit options after a successful incubation differ according to internal ideas and external start-ups, as well as the objective of the incubator. The research is based on a comprehensive screening of existing incubator literature and a qualitative content analysis of statements from eight experts of international corporate incubators.
Layout generators, commonly denoted as PCells (parameterized cells), play an important role in the layout design of analog ICs (integrated circuits). PCells can automatically create parts of a layout, whose properties are controlled by the PCell parameters. Any layout, whether hand-crafted or automatically generated, has to be verified against design rules using a DRC (design rule check) in order to assure proper functionality and producibility. Due to the growing complexity of today’s PCells it would be beneficial if a PCell itself could be ensured to produce DRC clean layouts for any allowed parameter values, i.e. a formal verification of the PCell’s code rather than checking all possible instances of the PCell. In this paper we demonstrate the feasibility of such a formal PCell verification for a simple NMOS transistor PCell. The set from which the parameter values can be chosen was found during the verification process.
A concept for a slope shaping gate driver IC is proposed, used to establish control over the slew rates of current and voltage during the turn-on and turn off switching transients.
It combines the high speed and linearity of a fully-integrated closed-loop analog gate driver, which is able to perform real-time regulation, with the advantages of digital control, like flexibility and parameter independency, operating in a predictive cycle-bycycle regulation. In this work, the analog gate drive integrated circuit is partitioned into functional blocks and modeled in the small-signal domain, which also includes the non-linearity of parameters. An analytical stability analysis has been performed in order to ensure full functionality of the system controlling a modern generation IGBT and a superjunction MOSFET. Major parameters of influence, such as gate resistor and summing node capacitance, are investigated to achieve stable control. The large-signal behavior, investigated by simulations of a transistor level design, verifies the correct operation of the circuit. Hence, the gate driver can be designed for robust operation.
In this paper we describe the design and development process of an electromagnetic picker for rivets. These rivets are used in a production process of leather or textile design objects like riveted waist belts or purses. The picker is designed such that it replaces conventional mechanical pickers thus avoiding mechanical wear problems and increasing the process quality. The paper illustrates the challenges in the design process of this mechatronic system. The design process was based on both simulation and experiments leading to a prototype that satisfies the requirements.