Refine
Year of publication
- 2019 (55) (remove)
Document Type
- Conference proceeding (27)
- Journal article (21)
- Book (3)
- Report (2)
- Patent / Standard / Guidelines (1)
- Working Paper (1)
Is part of the Bibliography
- yes (55)
Institute
- Technik (55) (remove)
Publisher
A fully passive RFID temperature sensor SoC with an accuracy of ±0.4 ◦C (3σ) from 0 ◦C to 125 ◦C
(2019)
This paper presents a fully passive 13.56 -MHz RFID temperature sensor system-on-chip. Its power management unit operates over a large temperature range using a zero temperature coefficient bias source. On-chip temperature sensing is accomplished with low-voltage, low-power CMOS circuitry, and time-domain signal processing. Two readout commands have been defined to study supply noise sensitivity: 1) standard readout, where just a single set of data is transferred to the reader and 2) serial readout, where several sets of data are sent one after the other to the reader. With the standard readout command, the sensor suffers from interference from the RFID command packet and outputs interference as well, while the sensor outputs no interference with the serial readout command. Measurements show that sensor resolution with serial readout is improved by a factor of approximately 16 compared to standard readout. The chip was fabricated in a standard 0.35-μm CMOS technology and chip-on-board mounted to a tuned RFID transponder coil on an aluminum core FR4 PCB substrate. Real time wireless temperature sensing has been demonstrated with a commercial HF RFID reader. With a two-point calibration, the SoC achieves a 3σ sensing accuracy of ±0.4 ◦C from 0◦C to 125 ◦C.
In this paper, we address the novel EDP (Expert Design Plan) principle for procedural design automation of analog integrated circuits, which captures the knowledge-based design strategy of human circuit designers in an executable script, making it reusable. We present the EDP Player, which enables the creation and execution of EDPs for arbitrary circuits in the Cadence® Virtuoso® Design Environment. The tool provides a generic version of an instruction set, called EDPL (EDPLanguage), enabling emulation of a typical manual analog sizing flow. To automate the design of a Miller Operational Amplifier and to create variants of a Smart Power IC, several EDPs were implemented using this tool. Employing these EDPs leads to a strong reduction of design time without compromising design quality or reliability.
This paper presents an approach for the implementation of a modular and scalable power electronics device for controlling electric drives in the field of electric vehicles using wide bandgap semiconductor devices. The main idea is to achieve the required output currents or voltages by connecting adequately designed hardware modules in parallel or in series. This particular design is based on the fact that the single modules generate a continuous and specified output voltage from a given dc voltage, e.g. an intermediate circuit or battery voltage. The main benefit is, that different current or voltage requirements can be satisfied based on a single module thus decreasing development and production costs. The current paper focuses on the connection in parallel of such modules. A control architecture is illustrated and a first proof of concept is given.
A novel brushless excitation concept for synchronous machines with a rotating power converter is proposed in this paper. The concept does not need an auxiliary winding or any other modification to the machine structure apart from an inverter with a DC link capacitor and a controller on the rotor. The power required for the rotor excitation is provided by injecting harmonics into the stator winding. Thus, a voltage in the field coil is induced. The rotor inverter is controlled such that the alternating current charges the DC link capacitor. At the same time the inverter supplies the DC field current to the field coil. The excitation concept is first developed in theory, then presented using an analytical model and FEA, and lastly investigated with a prelimininary experimental setup.
Aimed at the problem that the accuracy of face image classification in complex environment is not high, a network model F-Net suitable for aesthetic classification of face images is proposed. Based on LeNet-5, the model uses convolutional layers to extract facial image features in complex backgrounds, optimized parameters in the network model, and changes the number of convolutional layers and fully connected layer feature elements in the model. The experimental results show that the F-Net network model proposed in this paper has a face image classifation accuracy of 73% in complex environment background, which is better than other classical convolutional neural network classification models.
Based on a survey among customers of seven German municipal utilities, we estimate hierarchical multiple regression models to identify consumer motivations for participating in P2P electricity trading and develop implications for marketing strategies for this currently relatively unknown product. Our results show a low importance of socio-demographics in explaining differences between consumer groups, but high influence of attitudes, knowledge and likelihood to purchase related products. The most valuable target groups for P2P electricity trading marketing strategies of municipal utilities first and foremost should aim at are innovators, especially prosumers. They are well-informed about and open minded concerning electricity sharing and highly environmentally aware. They ask for transparency and are willing to purchase related products. They are attracted by the ability to share generation and consumption and to a lesser extent by economic reasons. Our results indicate that the marketing efforts should to a special degree take peer effects into account, as they are found to wield great influence on general openness towards and purchase intention for P2P electricity products. Finally, municipal utilities should build on the high level of satisfaction and trust of consumers and use P2P electricity trading as measure to keep and win customers willing to change their supplier.
Bei der spanenden Bearbeitung metallischer Werkstücke ist Verschleiß der Werkzeuge entscheidend für die Qualität der erzeugten Bauteiloberflächen und die Kosten der eingesetzten Werkzeuge. Damit ist der Werkzeugverschleiß und dessen Ursachen maßgebliches Auflegungskriterium für die Zerspanprozesse. Verschleiß wird dabei durch eine Vielzahl unterschiedlicher Parameter beeinflusst. Neben dem Werkstückwerkstoff, dem Schneidstoff und der Beschichtung sowie der Werkzeuggeometrie, sind die Schnittgeschwindigkeit, der Vorschub, die radiale und axiale Zustellung und die Prozessmedien ausschlaggebend für die Standzeit der Werkzeuge. Weitere Effekte gehen von den Eigenschaften des Werkstücks, Werkzeugs und der Maschinen aus. diese sind verantwortlich für die Entstehung von durch Instabilitäten verursachten Verschleiß. Im Folgenden wird die Systematik der Untersuchung unterschiedlich additivierter Kühlschmierstoffe auf den Verschleiß untersucht.
Anders als Digital-ICs, die hochautomatisiert entworfen werden können, ist der Entwurf analoger ICs bis heute Handarbeit. Übliche auf Optimierung basierende Automatisierungsverfahren scheitern. Die Ursachen wurden jetzt in einem Forschungsprojekt untersucht, um neue Ansätze zur Entwurfsautomatisierung analoger ICs abzuleiten.