Refine
Year of publication
- 2019 (94) (remove)
Document Type
- Journal article (41)
- Book (22)
- Conference proceeding (21)
- Book chapter (7)
- Patent / Standard / Guidelines (2)
- Anthology (1)
Has full text
- no (94) (remove)
Is part of the Bibliography
- yes (94)
Institute
- ESB Business School (37)
- Technik (20)
- Informatik (19)
- Life Sciences (11)
- Texoversum (7)
Publisher
- Elsevier (12)
- Springer (12)
- Universität Tübingen (9)
- Lange (4)
- VDE Verlag (4)
- Curran Associates Inc. (3)
- WOTech (3)
- Wiley (3)
- De Gruyter (2)
- Dnipro University of Technology (2)
Woven piezoelectric sensors as part of the textile reinforcement of fiber reinforced plastics
(2019)
Sensor integration in fiber reinforced plastic (FRP) structures enables online process and structural health monitoring (SHM). This paper describes the development and application of woven fabric-based piezoelectric impact and bending sensors for integration into FRP. The work focuses on design and characterization of woven piezoelectric sensors, especially as a part of the reinforcement structure. The reinforcement of the component acts as a sensor in itself and therefore no additional external objects in the form of sensor components or sensor fibers, which could create unwanted weak points within the FRP, are added. The bending test results reveal a direct relationship between the applied load and the sensor signal. Furthermore, the appropriate sensor position in the component cross section was determined and the influence of thermal polarization on the sensor properties was investigated.
Das Pariser Klimaschutzabkommen von 2015 fordert die Begrenzung der globalen Erwärmung auf "deutlich unter" 2 Grad Celsius gegenüber der vorindustriellen Zeit. Zwar wurde es von der internationalen Staatengemeinschaft anerkannt, jedoch reichen die national festgelegten Beiträge (NDCs) bisher nicht aus, um das Ziel zu erreichen. Neben der "Emissionslücke" besteht eine große Kluft zwischen naturwissenschaftlichem und öffentlichem Verständnis über den Klimawandel. Während die Besorgnis über den Klimawandel steigt, sehen die meisten Menschen den Klimawandel nicht als ernsthafte Bedrohung für sich selbst und Ansichten über den Klimawandel sind politisch polarisiert. Konventionelle Kommunikationsansätze haben die Lücke zwischen dem wissenschaftlichen und öffentlichen Verständnis über die durch den Klimawandel entstehenden Bedrohungen nicht geschlossen. Hier wird mit dem simulationsbasierten Rollenspiel World Climate ein innovativer Ansatz für die Klimakommunikation vorgestellt: ein soziales, einnehmendes Rollenspiel bei der Entscheidungsfindung im Klimaschutz ist mit einem interaktiven Computermodell kombiniert, das eine sofortige Rückmeldung über die erwarteten Ergebnisse von Entscheidungen liefert. Die Teilnehmenden erfahren mehr über den Klimawandel und erleben sogleich die soziale Dynamik der Verhandlungen. In diesem Beitrag werden die Ergebnisse einer Studie über Auswirkungen von World Climate präsentiert.
Auch das Liquiditäts- und Working Capital Management unterliegt einem ständigen Wandel. So hatte die Liquiditätssicherung nach Ausbruch der Finanzkrise 2008/09 in vielen Unternehmen höchste Priorität. In Zeiten niedriger Zinsen können die Kapitalkosten vernachlässigt werden, wodurch die Notwendigkeit sinkt, Bestände des Working Capital zu reduzieren. Bei steigenden Zinsen und/oder einer schwachen konjunkturellen Entwicklung verschärft sich dagegen der Zielkonflikt zwischen Sicherheit und Rentabilität.
Mögliche Verbesserungen ergeben sich beim Liquiditäts- und Working Capital Management durch die Digitalisierung, die den Informationsaustausch zwischen dem Unternehmen und seinemn Supply-Chain-Partnern beschleunigt. Damit lässt sich an vielen Stellen des Wertschöpfungsprozesses die Effizienz steigern.
Am Beispiel von zwei Unternehmen mit stark unterschiedlichen Strom- und Wärmebedarfswerten zeigt sich, dass aufgrund einer Amortisationszeit im günstigsten Fall von etwa 2 Jahren der Einsatz von Blockheizkraftwerken in jedem Fall wirtschaftlich lohnenswert ist. Dabei wird deutlich, dass die Auslegung des Blockheizkraftwerkes stark von den Strom- und Wärmebedarfswerten abhängt und dass der Pufferspeicher keinesfalls zu klein ausgelegt werden sollte. Das gute wirtschaftliche Ergebnis gilt bereits für den standardmäßig eingesetzten wärmegeführten Betrieb des Blockheizkraftwerkes, wobei eine intelligente stromoptimierte Steuerung mit Lastspitzenmanagement die Wirtschaftlichkeit weiter verbessert. Grundsätzlich ist darauf zu achten, dass Blockheizkraftwerke auf einen längerfristigen Betrieb ausgelegt sind. Bei jährlichen Betriebszeiten von 4.000 Stunden bis 8.000 Stunden ergibt sich ein Betrieb des Blockheizkraftwerkes über 6 bis 12 Jahre.
Die meisten Manager-Jobs im Bundesliga-Fußball gehen an ehemalige Spieler. Also an Männer, die ihr Leben früh dem Fußball gewidmet und auf eine spezifische Sportmanagement-Ausbildung verzichtet haben. Bei den Vereinen findet heute ein Umdenken statt - ein erster Club bietet durch ein Konzept ganz neue Möglichkeiten: Der VFB Stuttgart hat mit der "VfB Stuttgart Akademie" ein regionales Netzwerk für Bildung geschaffen, das in Deutschland einzigartig ist.
Das Flaggschiff der VfB Stuttgart Akademie ist der sogenannte "VfB-Master", ein berufsbegleitendes Masterstudium namens "MBA Leadership and Sports Management", das eigens für die VfB Stuttgart Akademie von der HfWU Nürtingen-Geislingen und dem Deutschen Institut für Sportmarketing in enger Abstimmung mit dem VfB Stuttgart maßgeschneidert entwickelt wurde und das die beiden Themen Sport und Wirtschaft auf außergewöhnliche Art und Weise miteinander verknüpft.
Jeder weiß, dass die Textil- und Bekleidungsindustrie ein Nachhaltigkeitsproblem hat und es neuer Lösungsansätze bedarf. Auch Konsumenten und deren Verhalten haben einen entscheidenden Einfluss auf die Erfolgsaussichten einer nachhaltigen Entwicklung. Welche Rolle und Bedeutung obliegt jedoch dem einzelnen Mitarbeiter in diesem Prozess? Und welche Handlungsmaßnahmen können daraus abgeleitet werden? Eine empirische Analyse von über 100 internationalen Bekleidungsunternehmen gibt Aufschluss.
Ein virtuelles Kraftwerk ist ein Verbund von Energieanlagen, koordiniert von einem gemeinsamen Leitsystem, um eine bessere Ausnutzung wetterabhängiger Energiequellen oder die gemeinsame Vermarktung von erzeugtem Strom zu ermöglichen. Der Demonstrator Virtuelles Kraftwerk Neckar-Alb ist eine Demonstrationsplattform für Forschung und Lehre, die Anlagen auf dem Campus der Hochschule Reutlingen und verteilte Anlagen in der Region Neckar-Alb integriert.
The Virtual Power Plant Neckar-Alb is a demonstration platform for operation, optimization and control of distributed energy resources, which are able to produce, store or consume electric energy. A heterogeneous set of distributed energy devices has been installed at the Campus of Reutlingen University by the Reutlingen Energy Centre (REZ) of the School of Engineering. The distributed energy devices have been combined to local microgrids and connected to an operative central power plant with additional participants. The demonstration platform serves students, researchers and industry experts for education and investigation of new technologies, devices and software.
Die vorliegende Erfindung betrifft ein Verfahren zum Bestimmen einer Fehlspannung eines Stromrichters, an den eine Last, insbesondere in Form einer Drehfeldmaschine wie Asynchronmaschine, angeschlossen ist, bestimmt und ggf. kompensiert wird, wobei eine Ausgangsspannung an dem Stromrichter stufen- oder schrittweise erhöht und der sich hierbei als Sprungantwort einstellende Strom gemessen wird. Die Erfindung betrifft weiterhin eine Drehfeldmaschine beispielsweise in Form einer Asynchronmaschine, mit einer Leistungselektronik umfassend einen tromrichter sowie einer Kompensationseinrichtung zum Kompensieren der Fehlspannung des Stromrichters, sowie weiterhin ein Verfahren zum Betreiben und/oder Steuern einer solchen Drehfeldmaschine, bei dem die Fehlspannung des Stromrichters bestimmt und kompensiert wird.
In addition to increased safety by detecting possible overload, continuous component monitoring by sensor integration makes the use of fiber reinforced plastics more cost-effective. Since the components are continuously monitored, one can switch from time-based to condition-based maintenance. However, the integration of conventional sensor components causes weak points, as foreign objects are inserted into the reinforcing structure. In this paper, we examine the use of the textile reinforcement as a sensor in itself. We describe how bending sensors can be formed by slightly modifying in the composite’s reinforcement structure. We investigated two different sensor principles. (1) The integration of textile plate capacitors into the structure; (2) The construction of textile piezo elements as part of the reinforcing structure. The bending test results reveal that textile plate capacitors show a load-dependent signal output. The samples with textile piezo elements show a significant increase in signal strength.
Due to the consequential impact of technological breakdowns, companies have to be prepared to deal with breakdowns or even better prevent them. In today's information technology, several methods and tools exist to downscale this concern. Therefore, this paper deals with the initial determination of a resilient enterprise architecture supporting predictive maintenance in the information technology domain and furthermore, concerns several mechanisms on how to reactively and proactively secure the state of resiliency on several abstraction levels. The objective of this paper is to give an overview on existing mechanisms for resiliency and to describe the foundation of an optimized approach, combining infrastructure and process mining techniques.
The use of gamification in workplace learning to encourage employee motivation and engagement
(2019)
When we think about playing a game, be it a card game, board game, sport, or video game, we generally associate the act of playing with a positive experience like having fun, enjoying the interaction with others, or feeling a greater motivation to reach a certain goal. By contrast, workplace learning is often perceived as being dull. Employees are likely at some point in their career to find themselves stuck in a rigidly defined seminar for a long period of time or in front of their computer navigating through a mandatory e-learning course on a dry topic such as standards of business conduct of safety policies.
In recent years, organizations have tried to leverage the motivating quality of games for more serious learning contexts. Gamification entails transferring those elements and principles from games to nongaming context that improve user experience and engagement. In this chapter, we will specifically focus on the context of workplace learning.
The sound of brands
(2019)
The aim of this research paper is to both examine and conceptualise the concept of audio branding. Audio branding is an important part of the overall brand management concept and corporate identity. Strong brands ease the choice for customers and convey values and a certain quality promise. Branding is of vital importance. It needs to be acknowledged that only 0.004% of all outer stimuli reach the human consciousness. Therefore, audio branding is a way to further strengthen the overall brand awareness. This leads to an emotional connection with a brand.
This study strives to determine the characteristics of audio branding and to analyse the corporate audio branding of Audi. The result of this research study is the suggestion of the use of audio branding in a way that fits the overall brand picture. Otherwise, the brand communication is inconsistent, and this could lead to a misunderstanding of the brand values for customers. The analysis of the Audi corporate sound design might be beneficial for practitioners. The overall evaluation of the concept of audio branding contributes to the existing body of literature in branding.
The economic thought of Friedrich List. - (Routledge studies in the history of economics ; 16)
(2019)
Friedrich List is, besides Karl Marx, one of the most important economists of the 19th century in Germany. Probably most modern economists know List for his idea of educational tariffs that protect infant industries from international competition an help them to become competitive before their country opens the domestic market for foreign rivals. Furthermore, List is still popular because of his contribution to establishing a railway system in the USA and Germany. However, a closer look at his work reveals that his ideas about the economic system could enrich the current theoretical and political debate on international trade and integration as well as economic growth.
Computers are increasingly used in teams in various contexts, for example in negotiations. Especially when using computer-support for decision making processes, it is an important question whether active collaboration within the team - for example via audio-conference - has additional benefits beyond the supply of full task-relevant information via computer. In team negotiations, team representatives are only able to represent the whole team, if diverse preferences of the team members are aligned prior to the negotiation. In an experimental study with 150 participants, we provided team members with the complete information about each other's preferences during an either collaboratively (computer-mediated) or seperately conducted computer-supported negotiation preparation and subsequently asked them for their priorities as representatives of the team. Our results showed that providing complete task-relevant information via computer is insufficient to compensate for the absence of active collaboration within the team.
Today, virtualizing pharma R&D is increasingly related with data analytics and artificial intelligence (AI), technologies that have been developed by software companies outside the healthcare sector. The process of virtualizing pharma R&D is closely related to the technological advancements that result in the generation of large data sets ranging from genomics, proteomics, metabolomics, medical imaging, IoT wearables and large clinical trials, making it necessary for pharma companies to find new ways to store and ultimately analyze information. As a consequence, pharma companies are experimenting with AI in R&D ranging from in-silico drug design to clinical trail participants identification or dosage error reduction.
Autism spectrum disorders (ASD) affect a large number of children both in the Russian Federation and in Germany. Early diagnosis is key for these children, because the sooner parents notice such disorders in a child and the rehabilitation and treatment program starts, the higher the likelihood of his social adaptation. The difficulties in raising such a child lie in the complexity of his learning outside of children's groups and the complexity of his medical care. In this regard, the development of digital applications that facilitate medical care and education of such children at home is important and relevant. The purpose of the project is to improve the availability and quality of healthcare and social adaptation at home of children with ASD through the use of digital technologies.
Ziel der Arbeit von Julian Ilg ist die Entwicklung einer systematischen Eignungsanalyse zum Einsatz additiver Fertigungsverfahren im unternehmensspezifischen Kontext. Der Autor fasst die gängigsten additiven Fertigungsverfahren zusammen und liefert einen Überblick über die derzeitige Anwendung dieser Verfahren sowie über die Herausforderungen bei deren Einsatz am Beispiel von Unternehmen aus der Medizintechnik. Basierend auf diesen Erkenntnissen gelingt es dem Autor, interessierten Unternehmen eine quantifizierende Entscheidungshilfe zu liefern, die gleichermaßen sowohl die ingenieurswissenschaftlichen Punkte als auch die wirtschaftlichen Aspekte beim Umstieg vom herkömmlichen Herstellungsverfahren auf additive Fertigungsverfahren berücksichtigt.
The development and preservation of children’s innate creativity as they enter their professional career has grown in importance due to fundamental changes in today’s economy and society. It is therefore key to understand how teaching strategies can contribute to educational change in the early stages of schooling. Design teaching encompasses a variety of skills that can help schools shift their focus to foster children’s natural ability to “ask why” in their search for learning how to think and create. This article presents the results of an interdisciplinary workshop involving university students aiming to develop new educational approaches to foster children’s creativity through design to be implemented in the elementary school curriculum of the German federal state Baden-Württemberg. To support the workshop participants in providing a holistic concept within a compressed time period, a sustainability framework was included to further articulate their brief. The teams who were composed of chemists, computer scientists, designers, and engineers, followed the Design Thinking process to develop their proposals. A kick-off meeting presenting results of an international qualitative survey with elementary school teachers, as well as expert input during the workshop addressing the relevant topics, provided teams with key information to define their design directions. Concepts designed by each team exhibited a comprehensive solution resulting in both the abstract “education idea” and physical embodiments of the tools. Their outputs included products, interior concepts to be implemented in classrooms, exercises as well as games to support the newly developed educational models. The benefits and limitations of these concepts along with key observations of participants’ interdisciplinary collaboration are presented and discussed herein. Future work will investigate the Design knowledge of German elementary school teachers more in depth and will involve testing the new concepts in German elementary school environments.
Stronger than they look
(2019)
Das Thema Energieflexibilität und Anpassung der eigenerzeugten Energie an die Energieerzeugung aus regenerativen Energien gewinnt an Bedeutung. Regulierbare Eigenerzeugungsanlagen können zur Stabilisierung des Netzes einen enormen Beitrag leisten. Dieser Aufsatz zeigt, welchen Effekt der Einsatz von BHWK auf die Galvanikbranche hat und wie nicht nur die eigenen Energiekosten reduziert, sondern auch die Möglichkeit geschaffen wird, auf Signale der Energiewirtschaft zu reagieren, ohne die Energieversorgung zu unterbrechen.
Business process models provide a considerable number of benefits for enterprises and organizations, but the creation of such models is costly and time-consuming, which slows down the organizational adoption of business process modeling. Social paradigms pave new ways for business process modeling by integrating stakeholders and leveraging knowledge sources. However, empirical research about the impact of social paradigms on costs of business process modeling is sparse. A better understanding of their impact could help to reduce the cost of business process modeling and improve decision-making on BPM activities. The paper constributes to this field by reporting about an empirical investigation via survey research on the perceived influence of different cost factors among experts. Our results indicate that different cost components, as well as the use of social paradigms, influence cost.
Revenue management information systems are very important in the hospitality sector. Revenue decisions can be better prepared based on different information from different information systems and decision strategies. There is a lack of research about the usage of such systems in small and medium-sized hotels and architectural configurations. Our paper empirically shows the current development of revenue information systems. Furthermore, we define future developments and requirements to improve such systems and the architectural base.
On-chip metallization, especially in modern integrated BCD technologies, is often subject to high current densities and pronounced temperature cycles due to heat dissipation from power switches like LDMOS transistors. This paper continues the work on a sensor concept where small sense lines are embedded in the metallization layers above the active area of a switching LDMOS transistor. The sensors show a significant resistance change that correlates with the number of power cycles. Furthermore, influences of sense line layer, geometry and the dissipated energy are shown. In this paper, the focus lies on a more detailed analysis of the observed change in sense line resistance.
Sowohl die Zahl als auch die Relevanz gemeinnütziger Vereine in und für Deutschland ist immens. Gleichwohl erstaunt, dass die Rechnungslegung gemeinnütziger Vereine nur rudimentär geregelt ist und in der Forschungspraxis bisher eher wenig beleuchtet wird. Vor allem für die oftmals nur ehrenamtlich tätigen Vereinsvorstände stellt dies eine Herausforderung dar. Der vorliegende Beitrag schafft einen Überblick über die aktuelle Situtation der Vereinsrechnungslegung in Deutschland und erhebt im Rahmen einer empirischen Untersuchung die aktuellen Herausforderungen. Aus den Ergebnissen lassen sich wichtige Implikationen für die rechnungslegenden Vereine, die Adressaten dieser Rechnungslegung, den Gesetzgeber und die Prüfer der Berichte ableiten.
Das forschungsgetriebene Lehrformat "Projektorientiertes Lernen" wird im Masterprogramm der Fakultät Angewandte Chemie der Hochschule Reutlingen von uns seit nunmehr einer Dekade eingesetzt und stetig weiter entwickelt. Dieses Format hat sich besonders bewährt, um methodische und fachliche Kompetenzen nachhaltig zu vermitteln. Es war uns ein Anliegen, auch anderen an der praxisorientierten Ausgestaltung der Lehre Interessierten unsere Erfahrungen mitzuteilen und unsere Vorgehensweise konkret vorzustellen. Dazu haben wir unsere bisher verwendeten Dokumente und Veröffentlichungen zu diesem Thema redigiert und stellen sie in dem vorliegenden Buch vor. In diesem von uns als "Kurshandbuch" für Anwender gedachten Werk finden sich unsere über Jahre gesammelten Erfahrungen mit der Organisation eines solchen Lehr- und Lernformats.
Smart Stadiums eignen sich als Testfeld für die Smart City, um die Lücke zwischen der Forschung und der Anwendung von Internet of Things Technologien in der Praxis zu schließen. Gleichzeitig können Stadionbetreiber durch die Monetarisierungspotenziale des Smart Stadium Konzeptes ihre Arena zu einem Profit Center ausbauen. Die Erreichung einer Technologieakzeptanz bei den Zuschauern durch die Schaffung von Synergieeffekten zwischen Stadionbetreibern, Technologieanbietern und der Wissenschaft unter Berücksichtigung der kulturellen Besonderheiten im jeweiligen Markt kann dabei als kritischer Erfolgsfaktor für die Nutzengenerierung der verschiedenen Stakeholder eines Smart Stadiums angesehen werden.
OR-Pad - Entwicklung eines Prototyps zur sterilen Informationsanzeige am OP-Situs : meeting abstract
(2019)
Hintergrund: Oftmals werden Informationen aus der Krankenakte oder von Bildgebungsverfahren nur auf recht weit vom Operationsgebiet entfernten Monitoren, außerhalb der ergonomischen Sichtachse des Operateurs, dargestellt. Dies führt dazu, dass relevante Informationen übersehen werden oder ihr Informationspotenzial nicht ausgeschöpft werden kann. In Papierform mitgenommene Notizen befinden sich während der OP außerhalb des sterilen Bereichs und sind dadurch für den Operateur nicht ohne Weiteres zugänglich. Auch bei intraoperativen Einträgen für die OP Dokumentation ist der Operateur auf die Mithilfe der Assistenz angewiesen. Durch die zusätzlichen Kommunikationswege entstehen dabei ein personeller und zeitlicher Mehraufwand und das Fehlerpotenzial nimmt zu. Das anwendungsorientierte Forschungsprojekt OR-Pad - Nutzung von portablen Informationsanzeigen im Operationssaal - soll dem Operateur zu einem verbesserten Informationsfluss verhelfen. Die Idee entstand aus der klinischen Routine der Anatomie und Urologie des Universitätsklinikums Tübingen und wird nun durch Fördermittel vom Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg sowie vom Europäischen Fonds für regionale Entwicklung an der Hochschule Reutlingen zu einem High Fidelity-Prototypen weiterentwickelt.
Ziel: Ziel des OR-Pad Projekts ist es, während einer OP zum aktuellen Zeitpunkt klinisch relevante Informationen in unmittelbarer Nähe zum Operateur darzustellen. Mithilfe des Systems soll der Informationsfluss zwischen dem Eingriff sowie dessen Vor- und Nachbereitung optimiert werden. Der Operateur soll vorab relevante Informationen, wie aktuelle Röntgenbilder oder persönliche Notizen, zur intraoperativen Anzeige auswählen können, die dann am OP-Situs auf einer sterilen Informationsanzeige dargestellt werden. Durch die Positionierung soll eine ergonomische Sichtachse sowie die direkte Interaktion mit dem System ermöglicht werden. Kontextrelevante Informationen sollen basierend auf dem aktuellen OP-Verlauf durch die Entwicklung einer Situationserkennung automatisch bereitgestellt werden. Zur Optimierung des Informationsflusses gehört ebenfalls die Unterstützung der OP-Dokumentation. Für diese sollen während des Eingriffs manuell vom Operateur sowie automatisch vom System Einträge, wie Zeitpunkte oder intraoperative Aufnahmen, erstellt werden. Aus diesen soll nach dem Eingriff die OP-Dokumentation generiert und damit der Prozess qualitativer und zeiteffizienter gestaltet werden.
Methodik: Zur Erreichung des Ziels werden zunächst die klinischen Anforderungen spezifiziert und in ein Lastenheft überführt. Hierfür werden Interviews und Beobachtungen bei mehreren Interventionen durchgeführt. Nach dem User-Centered-Designprozess werden Personas und Nutzungsszenarien entworfen und mit klinischen Projektpartnern in mehreren Iterationen evaluiert. Es gilt eine Informationsarchitektur aufzubauen, die eine Einbettung klinischer Informationssysteme sowie Bild- und Gerätedaten aus dem OP-Netzwerk erlaubt. Eine Situationserkennung, basierend auf Prozessmodellen, soll zur Abschätzung des Operationsfortschritts entwickelt werden. Zur Befestigung der Informationsanzeige sollen geeignete Haltemechanismen eingesetzt werden. Das OR-Pad System soll laufend im Lehr- und Forschungs-OP der Hochschule Reutlingen getestet und im Sinne agiler Produktentwicklung mit den klinischen Projektpartnern abgestimmt werden. Der finale Funktionsprototyp soll abschließend in den Versuchs-OPs der Anatomie Tübingen getestet und evaluiert werden.
Ergebnisse: Über eine erste Datenerhebung mittels Contextual Inquiry konnten erste Anforderungen an das OR-Pad System erfasst werden, woraus ein Low-Fidelity-Prototyp resultierte. Die Evaluation über Experteninterviews führte in die zweite Iteration, in der das Konzept entsprechend der Ergebnisse angepasst wurde. Über Hospitationen am Uniklinikum Tübingen fand eine weitere Datenerhebung zur Erstellung von Szenarien für die intraoperativen Anwendungsfälle statt. Anhand der Anforderungen wurde ein Konzept für die Benutzerschnittstelle entworfen, die im weiteren Verlauf mit den klinischen Projektpartnern evaluiert wird.
Optofluidics
(2019)
This introduction into the multidisciplinary area of optofluidics offers the necessary foundations in photonics, polymer physics and process analytics to students, engineers and researchers to enter the field. All basic ingredients of a polymer-based platform as a foundation for quick and compact solutions for chemical, biological and medical sensing and manipulation are developed.
This paper generalizes the theory of policy uncertainty with the new literature on rational inattention. First, the model demonstrates that inattention is dependent on the signal variance and the policy parameter. Second, I discover a novel trade-off showing that a policy instrument mitigates attention. Third, the policy instrument is non-linear and reciprocal to both the size and variance of the signal. The unifying theory creates new implications to economic theory and public policy alike.
Urban platforms are essential for smart and sustainable city planning and operation. Today they are mostly designed to handle and connect large urban data sets from very different domains. Modelling and optimisation functionalities are usually not part of the cities software infrastructure. However, they are considered crucial for transformation scenario development and optimised smart city operation. The work discusses software architecture concepts for such urban platforms and presents case study results on the building sector modelling, including urban data analysis and visualisation. Results from a case study in New York are presented to demonstrate the implementation status.
Die Erholung unseres Körpers und Gehirns von Müdigkeit ist direkt abhängig von der Qualität des Schlafes, die aus den Ergebnissen einer Schlafstudie ermittelt werden kann. Die Klassifizierung der Schlafstadien ist der erste Schritt dieser Studie und beinhaltet die Messung von Biovitaldaten und deren weitere Verarbeitung. Das non-invasive Schlafanalyse-System basiert auf einem Hardware-Sensornetz aus 24 Drucksensoren, das die Schlafphasenerkennung ermöglicht. Die Drucksensoren sind mit einem energieeffizienten Mikrocontroller über einen systemweiten Bus mit Adressarbitrierung verbunden. Ein wesentlicher Unterschied dieses Systems im Vergleich zu anderen Ansätzen ist die innovative Art, die Sensoren unter der Matratze zu platzieren. Diese Eigenschaft erleichtert die kontinuierliche Nutzung des Systems ohne fühlbaren Einfluss auf das gewohnte Bett. Das System wurde getestet, indem Experimente durchgeführt wurden, die den Schlaf verschiedener gesunder junger Personen aufzeichneten. Die ersten Ergebnisse weisen auf das Potenzial hin, nicht nur Atemfrequenz und Körperbewegung, sondern auch Herzfrequenz zu erfassen.
New approaches to respiratory assist: bioengineering an ambulatory, miniaturized bioartificial lung
(2019)
Although state-of-the-art treatments of respiratory failure clearly have made some progress in terms of survival in patients suffering from severe respiratory system disorders, such as acute respiratory distress syndrome (ARDS), they failed to significantly improve the quality of life in patients with acute or chronic lung failure, including severe acute exacerbations of chronic obstructive pulmonary disease or ARDS as well. Limitations of standard treatment modalities, which largely rely on conventional mechanical ventilation, emphasize the urgent, unmet clinical need for developing novel(bio)artificial respiratory assist devices that provide extracorporeal gas exchange with a focus on direct extracorporeal CO2 removal from the blood. In this review, we discuss some of the novel concepts and critical prerequisites for such respiratory lung assist devices that can be used with an adequate safety profile, in the intensive care setting, as well as for long-term domiciliary therapy in patients with chronic ventilatory failure. Specifically, we describe some of the pivotal steps, such as device miniaturization, passivation of the blood-contacting surfaces by chemical surface modifications, or endothelial cell seeding, all of which are required for converting current lung assist devices into ambulatory lung assist device for long-term use in critically ill patients. Finally, we also discuss some of the risks and challenges for the long-term use of ambulatory miniaturized bioartificial lungs.
In der Vergangenheit ist der Materialfluss meist mit der Produktion gewachsen. Mit steigender Produkt-Individualität erhöht sich die Anzahl der zu fertigenden Varianten in der Produktion und somit die Komplexität der Materialflüsse. Im Rahmen dieser Arbeit wurden Möglichkeiten und Methoden zur Aufnahme und Optimierung von Materialflüssen im Zusammenhang mit hoher Variantenvielfalt untersucht.
The energy turnaround, digitalization and decreasing revenues forces enterprises in the energy domain to develop new business models. Business models for renewable energy are compound on different logic than business models for larger scale power plants. Following a design science research approach, we examined the business models of three enterprises in the energy domain in a first step. We identified that these business models result in complex ecosystems with multiple actors and difficult relationships between them. One cause is the fast changing and complicated state regulation in Germany. In order to solve the problem, we captured together with the partners of the enterprises the requirements in a second phase. Further we developed the prototype Business Model Configurator (BMConfig) based on the e3Value Ontology on the metamodelling platform ADOxx. We demonstrate the feasibility of our approach in business model of energy efficiency service based on smart meter data.
Companies are continuously changing their strategy, processes, and information systems to benefit from the digital transformation. Controlling the digital architecture and governance is the fundamental goal. Enterprise Governance, Risk and Compliance (GRC) systems are vital for managing digital risks threatening in modern enterprises from many different angles. The most significant constituent to GRC systems is the definition of controls that is implemented on different layers of a digital Enterprise Architecture (EA). As part of the compliant aspect of GRC, the effectiveness of these controls is assessed and reported to relevant management bodies within the enterprise. In this paper, we present a metamodel which links controls to the affected elements of a digital EA and supplies a way of expressing associated assessment techniques and results. We complement a metamodel with an expository instantiation of a control compliance cockpit in an international insurance enterprise.
Die Erfindung betrifft ein Verfahren zur extrinsischen Kalibrierung wenigstens eines bildgebenden Sensors, wonach eine Pose des wenigstens einen bildgebenden Sensors relativ zu dem Ursprung (U) eines dreidimensionalen Koordinatensystems einer Handhabungseinrichtung mittels einer Recheneinrichtung bestimmt wird, wobei bekannte dreidimensionale Koordinaten betreffend die Position wenigstens eines Gelenks der Handhabungseinrichtung durch die Recheneinrichtung berücksichtigt werden, und wobei zweidimensionale Koordinaten betreffend die Position des wenigstens einen Gelenks anhand von Rohdaten des wenigstens einen bildgebenden Sensors ermittelt werden, und wobei die Recheneinrichtung die Pose des wenigstens einen bildgebenden Sensors anhand der Korrespondenz zwischen den zweidimensionalen Koordinaten und den dreidimensionalen Koordinaten bestimmt.
Bei der spanenden Bearbeitung metallischer Werkstücke mit Werkzeugmaschinen ist die Produktivität und Qualität der erzeugten Werkstücke wesentliches Kriterium für die Wirtschaftlichkeit. Zur Erreichung dieser Ziele sind genaue Kenntnisse der Leistungsfähigkeit und Eigenschaften der eingesetzten Produktionsmittel erforderlich. Dazu sind seit geraumer Zeit unterschiedliche Methoden der Untersuchung z.B. der statischen und dynamischen Maschineneigenschaften bekannt. Dazu gehören die Messung der statischen und dynamischen Nachgiebigkeit, die Aufnahme der Eigenschwingungen mittels der experimentellen Modalanalyse. Diese Methoden werden häufig nur im Laborbetrieb angewandt. In diesem Beitrag werden Kriterien dargestellt, die bei der Übertragung der Analyse auf den realen Betrieb noch zu berücksichtigen sind, um die Ergebnisse interpretieren zu können.
Das Essential beschäftigt sich mit der Frage, in welcher Form und in welchem Ausmaß das interne Berichtswesen beabsichtigte und unbeabsichtigte Verhaltenswirkungen bei den Beteiligten auslöst und umgekehrt selbst durch nicht intendiertes Verhalten von Beteiligten in seinen Wirkungen beeinflusst wird. Der Ansatz des „Behavioral Accounting“ wird dabei auf die spezifische Controllingaufgabe des internen Berichtswesens angewendet. Andreas Taschner erläutert, wie Berichte bei Berücksichtigung ihrer direkten und indirekten Wirkungen auf das Verhalten einzelner Betroffener zu einem wirkungsvollen Instrument der Unternehmenssteuerung werden.
Im Rahmen dieses Aufsatzes soll anhand eines Praxisbeispiels aufgezeigt werden, wie sich vor dem Hintergrund des aktuellen KWK-Gesetzes die Entscheidung für eine KWK-Anlage mit einer größeren Leistung bereits heute wirtschaftlich auswirkkt. Darüber hinaus wird eine Methode zur Festlegung des optimalen Pufferspeichervolumens vorgestellt.
This book contains the proceedings of the KES International conferences on Innovation in Medicine and Healthcare (KES-InMed-19) and Intelligent Interactive Multimedia Systems and Services (KES-IIMSS-19), held on 17–19 June 2019 and co-located in St. Julians, on the island of Malta, as part of the KES Smart Digital Futures 2019 multi theme conference.
The major areas covered by KES-InMed-19 include: Digital IT Architecture in Healthcare; Advanced ICT for Medical and Healthcare; Biomedical Engineering, Trends, Research and Technologies and Healthcare Support System. The major areas covered by KES-IIMSS-19 were: Interactive Technologies; Artificial Intelligence and Data Analytics; Intelligent Services and Architectures and Applications.
This book is of use to researchers in these vibrant areas, managers, industrialists and anyone wishing to gain an overview of the latest research in these fields.
In spite of many studies, knowledge about the fundamental factors influencing adhesion between addition curing silicones and aluminum substrates is very limited. The aim of this publication is to evaluate the influence of the formulation and the surface state of the adherend on bond strength. For this purpose, the composition of an addition curing silicone was systematically varied and the effects on both material and bond properties were examined. Additionally, the influence of surface aging at different humidities (0% r. h., 34% r. h., 82% r. h.) of acid etch pretreated aluminum substrates was considered. It is shown that the mechanical properties of the silicone material can be easily adjusted over a wide range by changing the formulation. Although high tensile strengths up to 9.2 MPa for the silicone material can be achieved, lap-shear strengths remain moderate at approximately 3.5 MPa. Predominant adhesive failures show the limited adhesive strength of the basic formulation without additives. Basic ingredients of addition curing silicones without additives are able to reach a certain adhesive strength. However, this strength was quite limited and adhesion promoters are required to further improve adhesion. The humidity at which the pretreated substrates are stored has an overall minor influence on bond strength. Surprisingly, bond strength tends to increase with the storage time of aluminum substrates despite lower surface energies in comparison to freshly pretreated substrates. All in all, the storage conditions of aluminum had a rather small influence on adhesion, whereas the composition of the silicone adhesive strongly influences bond strength.
Indicators of disruption potentials - analysis of the blockchain technology’s potential impact
(2019)
The goal of this paper was to answer the question whether blockchain has the potential to become a disruption according to Clayton Christensen’s disruption theory. Therefore, the theory and the five characteristics that define the process of disruption were outlined in the first part of the paper. That and the following explanation of the blockchain technology served as the basis for the analysis and evaluation in chapters four to seven. For the analysis, three applications of the DLT, namely payment methods, intermediaries, as well as data storage and transfer, were considered. The fulfillment of the five characteristics of disruption was assessed using an example for each of the three applications.
Additionally, the paper might serve as a basis for future research on the topic, once the technology develops further, since it is generally hard to tell whether the fourth and fifth characteristics are fulfilled by blockchain at this point. Therefore, the results of the paper also back criticism of Christensen’s theory regarding its usefulness for predictions.
This paper suggests that, in the financial services industry, too, the impact of blockchain will be significant. However, given the manifoldness of the services that are part of the industry, it cannot generally be concluded whether the DLT will disrupt the industry. For example, in services related to payment methods, blockchain is unlikely to follow disruptive pattern, despite the recent hype surrounding blockchain-based cryptocurrencies. However, regarding data storage and transfer, the technology might as well follow disruptive pattern in the financial services industry just as the application of blockchain solutions has been doing in the healthcare industry.
Homogeneous and monodispersed furan functionalised melamine-formaldehyde particles were produced. As a precursor, 2-chloro-1,3,5-triazine-2,4-diamine (Mel) was selectively substituted with 2-aminomethyl furan (Fu) units in a convenient one step reaction. The pure reaction product Fu-Mel, which was used without further purification, was reacted with formaldehyde by conventional sol-gel condensation in aqueous medium to yield chemically homogenous, spherically shaped and monodispersed particles. The particles were analysed using ATR-FT-IR, Raman, 1H and 13C NMR spectroscopy, TGA, SEM and DSC measurements. The reactivity of the furan groups located at the particle surface was studied by performing a thermoreversible Diels-Alder cycloaddition reaction with bis-maleimide coupling agents. The formed networks showed thermoreversible behaviour, which was characterised by dynamic IR and DSC measurements.
The goal of the presented project is to develop the concept of home e-health centers for barrier-free and cross-border telemedicine. AAL technologies are already present on the market but there is still a gap to close until they can be used for ordinary patient needs. The general idea needs to be accompanied by new services, which should be brought together in order to provide a full coverage of service for the users. Sleep and stress were chosen as predominant influence in the population. The executed scientific study of available home devices analyzing sleep has provided the necessary to select appropriate devices. The first choice for the project implementation is the device EMFIT QS+. This equipment provides a part of a complete system that a home telemedical hospital can provide at a level of precision and communication with internal and/or external health services.
Seit über 160 Jahren ist die Hochschule Reutlingen ein Innovationsmtor in der Region. Die Webschule zur Förderung der Textilindustrie entwickelt sich in dieser Zeit zu einer der größten Hochschulen für angewandte Wissenschaften im Land. An fünf Fakultäten studieren mehr als 5500 Fach- und Führungskräfte von morgen - praxisnah und mit internationaler Ausrichtung.
The paper analyses the importance of List's views on growth and integration from the perspective of modern approaches to economic growth and international economics. Furthermore, some ideas will be presented on how List's ideas could help to explain and understand current economic developments, such as the crisis of the European Union or the new form of isolationism of the United States of America.
In den letzten Jahren hat das Gebiet der additiven Fertigung einen unglaublichen Schub erfahren. Es haben sich kostengünstige Endkonsumerdrucker in der sogenannten "Makerszene" verbreitet, die vielfältige neue Fertigungsmöglichkeiten bieten. Überzogene Berichterstattungen über diese Möglichkeiten haben einen wahren Hype ausgelöst. Trotz der entstandenen neuen Chancen zur Fertigung von Produkten bleiben die realisierbaren Möglichkeiten oft hinter den Erwartungen zurück. Einerseits liegt das an der Teilequalität und an den zur Verfügung stehenden Materialien. Andererseits kommen im Endkonsumerbereich überwiegend Drucker auf der Basis des FDM- oder DLP-Verfahrens zum Einsatz, damit ergibt sich folglich eine sehr eingeschränkte Verfahrenspalette.
The field of additive manufacturing has experienced an incredible surge over the last few years. Affordable end-user printers, which open a wide variety of new production opportunities, have spread throughout the so called "maker community", while overblown reports about the possibilities on offer have whipped up a real hype. Although new ways of making products have now become available, what can actually be achieved often lags behind people's expectations. On the one hand, this is down to component quality and the materials being used, while on the other hand, most printers found in the end-user sphere use the FDM or DLP process, which significantly restricts the printing methods that can be utilized.
Research organisations are not only contributing to sustainable development but also contribute to scientific findings. As key influencers of innovation; employers and publicly funded research organisations not only have the social mandate to deal with their responsibilities regarding the environment and society, but also drive to understand their social responsibility for their employees and the impact on research and operational processes. Sponsored by the German Federal Ministry for Education and Research (BMBF), this paper presents the results of the joint research project; LENA—Guidelines for Sustainability Management and describes how 3 of Germany’s biggest research organisations (Fraunhofer-Gesellschaft, Leibniz Association and Helmholtz Association) face current challenges in human resource management of research organisations by the integration of a common understanding of sustainability and a broad-based framework. The empirical basis is built by a qualitative organisational ethnographical study which reflects the expert knowledge, everyday experiences and the subject-oriented interpretation of sustainability in human resource management. The result derives concrete recommendations for the institutional practice and offers structured and methodologically proven options for action addressing the stakeholders in human resource management in research institutions.
Haptic softness is a central product attribute for many fabric-related retailers. Can those retailers use music - an easy to implement in-store atmospheric cue - to influence consumers' perception of this central product attribute? Across four studies, this research shows that high (vs. low) music softness enhances consumers' haptic softness perceptions. We argue that this cross-modal effect occurs owing to a transfer of softness-related associations from the auditory to the haptic modality. To better inform retail practice, we examine three managerially relevant boundary conditions at the product and store levels.
Ganz gleich, ob im privaten oder beruflichen Alltag, begleiten uns digitale Medien heute nahezu überall. Dabei dienen sie nicht nur zur Unterhaltung, sondern helfen uns, Arbeitsabläufe effizienter und produktiver durchzuführen. Doch die Arbeit des Menschen ist bei Weitem nicht überflüssig geworden. Durch die steigenden Anforderungen ist die Nachfrage nach qualifiziertem Fachpersonal heute höher denn je. Währenddessen müssen Mitarbeiter in der Lage sein, mit der rasanten Entwicklung neuer Produkte und Technologien Schritt zu halten. Dabei ist eine qualitative Aus- und Weiterbildung unumgänglich. Beginnend mit der Bildung von Medienkompetenz in Schulen bis hin zur Fach- und Berufsbildung sowie beruflichen Weiterbildung, muss der Umgang mit digitalen Technologien gelehrt sein. Darüber hinaus bieten diese Technologien neue Potenziale zur Verbesserung von Bildungskonzepten und können zudem dabei helfen, den Lernerfolg zu steigern.
Diese Arbeit beschäftigt sich mit der Evaluation einer VR-basierten Lernumgebung und untersucht mögliche Auswirkungen auf den Lernerfolg durch die verkörperte Darstellung eines virtuellen Instruktors. Dazu wurde die technische Implementierung einer kollaborativen Lernumgebung vorgenommen, mit welcher anschließend eine Versuchsreihe mit 16 Probanden durchgeführt wurde. Im Hinblick auf eine mögliche Steigerung der Effizienz in der eigenständigen Bewältigung von Montageaufgaben nach unterschiedlichen Instruktionsarten, wurden keine signifikanten Leistungsverbesserungen festgestellt.
Eine hohe Werbewirkung erreichen, die sich durch Kreativität von Wettbewerbern absetzt und das mit geringen finanziellen Mitteln - das ist eine Wunschvorstellung für viele Start-Ups. Doch offen bleibt die Frage nach dem Wie. Eine Möglichkeit, dieses Ziel zu erreichen, bildet das Low Budget Guerilla Marketing.
Die vorliegende Arbeit beschäftigt sich damit, wie Guerilla Marketing mit einem überschaubaren Budget erfolgreich umgesetzt werden kann. Den Rahmen für die Analyse bildet die Erfolgsfaktorenforschung. Erarbeitet werden entscheidend Erfolgs- und Misserfolgsfaktoren des Low Budget Guerilla Marketing.
Was kann ein produzierender Mittelständler tun, damit die Möglichkeiten für einen effizienteren Umgang mit Energie in seinem Betrieb auch ausgeschöpft werden? Die Ergebnisse eines zweijährigen Forschungsprojektes in Baden-Württemberg: Energieeffizienz ist für die kleinen und mittleren Unternehmen (KMU) ein grundsätzlich bedeutsames Thema, größtenteils gleichbedeutend mit anderen strategischen oder operativen Fragen. Je größer die Unternehmen, umso mehr trifft das zu ; die Unterschiede nach Energiebedarf sind hingegen gering. Erfolgsversprechende Maßnahmen sind: die Unternehmen müssen Energieeffizienz strategisch verankern und ihre Führung darauf ausrichten, sollten möglichst viele verschiedene Maßnahmen umsetzen und die Belegschaft sensibilisieren. Aber auch die gesellschaftliche Meinung "treibt" die Unternehmen zu mehr Energieeffizienz.
With on-demand access to compute resources, pay-per-use, and elasticity, the cloud evolved into an attractive execution environment for High Performance Computing (HPC). Whereas elasticity, which is often referred to as the most beneficial cloud-specific property, has been heavily used in the context of interactive (multi-tier) applications, elasticity-related research in the HPC domain is still in its infancy. Existing parallel computing theory as well as traditional metrics to analytically evaluate parallel systems do not comprehensively consider elasticity, i.e., the ability to control the number of processing units at runtime. To address these issues, we introduce a conceptual framework to understand elasticity in the context of parallel systems, define the term elastic parallel system, and discuss novel metrics for both elasticity control at runtime as well as the ex post performance evaluation of elastic parallel systems. Based on the conceptual framework, we provide an in depth analysis of existing research in the field to describe the state-of-the art and compile our findings into a research agenda for future research on elastic parallel systems.
Palladium-doped silica materials with SiCH3 groups were fabricated by sol-gel method under various calcination atmospheres and membranes were made thereof by coating process. The results showed that air atmosphere can lead to the partial oxidation of metallic Pd0 to PdO while N2 and H2 atmospheres can effectively prevent metallic Pd0 from being oxidized. H2 atmosphere is proved to be a more prominent way to slow down the decomposition of organic SiCH3 group than N2 and air atmospheres. The surface area, micropore volume and porosity of palladium-doped silica membrane material calcined in H2 atmosphere are much higher than those calcined in N2 atmosphere. Compared with N2 atmosphere, the palladium-doped silica membranes calcined in H2 atmosphere showed higher H2 permeability and H2/CO2 selectivity before and after the steam exposure. The apparent activation energy of H2 permeation through the palladium-doped silica membrane calcined under H2 atmosphere (2.51 ± 0.05 kJ/mol) was slightly lower than that calcined under N2 atmosphere (2.84 ± 0.04 kJ/mol). Calcination atmosphere plays some role in membrane performance, which has greater influence on the permeance than on the gas permselectivity. Calcination under H2 atmosphere is well conducive to improve the gas permeance and H2 permselectivity of palladium-doped silica membrane.
Um die ökologischen und ökonomischen Potenzaile der Elektromobilität zu nutzen, setzen kommunale Energieversorger heute auf das Betreiben öffentlicher Ladestationen, den Handel mit Ladestationen und das Bereitstellen spezieller Elektromobilitätstarife; ebenso auf elektrifiziertes Carsharing oder das Vermieten elektrifizierter Fahrzeuge und den Betrieb elektrifizierter Omnibusse im ÖPNV. Auch die Entwicklung und Planung individueller Elektromobilitätskonzepte, teils in Kombination mit Photovoltaikanlage, gehören in einigen Unternehmen zum Portfolio. Für die Zukunft sollten Stadtwerke ihre Aktivitäten im Bereich Elektromobilität an individuell definierten Zielen und Strategien ausrichten.
Digitale Transformation: Können Sie den Begriff noch hören, ohne mit den Augen zu rollen? Auch wenn der Begriff in aller Munde ist, besteht immer noch große Verwirrung darüber, was eigentlich so neu daran sein soll. Immerhin setzen Unternehmen ja (digitale) Informationstechnologien (IT) seit Jahrzehnten ein, um Geschäftsprozesse zu verbessern.
A digital twin - a replica of energy devices - was established in the computing environment of MATLAB and Simulink. It simulates continuously their operation and is time synchronized and connected to the cenral energy management and control system of a virtual power plant. The model can be used as a platform for testing device performance in various conditions, working schedules and new optimization options.
In 2017, Philips' goal was to use innovation to improve the lives of three billion people a year by 2025. To achieve that, the company was shifting from selling medical products in a transactional manner to providing integrated healthcare solutions based on digital health technology. Based on our interviews with 23 executives at Philips, the case examines the two directions of the transformation required by this shift: externally, Philips worked on transforming how healthcare was conducted. Healthcare professionals would have to change the way they worked and reimbursement schemes needed to change to incentivize payers, providers, and patients in vastly different ways. Internally, Philips needed to redesign how its employees worked. The company componentized its business, introduced digital platforms, and co-created integrated solutions with the various stakeholders of the healthcare industry. In other words: Philips was transforming itself in order the reinvent healthcare in the digital age.
The rise of digital technologies has become an important driver for change in multiple industries. Therefore, firms need to develop digital capabilities to manage the transformation process successfully. Prior research assumes that the development of a specific set of digital capabilities leads to higher digital maturity. However, a measurement framework for digital maturity does not exist in scholarly work. Therefore, this paper develops a conceptualization and measuremnent model for digital maturity.
Die Förderung der Kraft-Wärme-Kopplung (KWK) in kleinen und mittleren Unternehmen der Galvanotechnik stellt ein erklärtes Ziel des Landes Baden-Württemberg und des Forschungsprojekts GalvanoFlex_BW dar. Als komplexe Energieeffizienzmaßnahme stellt die Kraft-Wärme-Kopplung erhöhte Anforderungen an die Unternehmen und das professionelle Umfeld (Beratung, Service, Handwerk, Contracting). Hemmnisse zur Umsetzung der Technologie finden sich daher sowohl innerhalb der Unternehmen als auch außerhalb. Die Hemmnisse bei der Umsetzung der Kraft-Wärme-Kopplung in der Galvanotechnik sind auf unterschiedliche Ursachen zurückzuführen, wie hohe Komplexität der KWK-Technologie, schwierige Bewertung des Gesamtnutzens im Unternehmen, mangelnde personelle Ausstattung oder auch fehlende Unternehmerentscheidungen. Empfehlungen der Forschungspartner zu deren Überwindung können aus den Ergebnisses der sozial-wissenschaftlichen Begleitforschung gewonnen werden.
Die Landessprache in der Lehre - welche Bedeutung kommt ihr bei der Internationalisierung zu?
(2019)
Seit der Jahrhundertwende wird erfolgreich die Intensivierung des Austauschs zwischen wissenschaftlichen Einrichtungen betrieben, auch national, aber vor allem international. Anfänglich schien klar, dass gute Indikatoren für die "Internationalisierung" genannte Entwicklung die Anteile ausländischer Wissenschaftler und Studierender sind. Konsens über sinnvolle Zielgrößen für die Indikatoren gibt es jedoch bisher nicht. Nach einiger Zeit flachte sich der anfängliche Anstieg dieser Quoten etwas ab. Mit der Folge einer weiteren Steigerung dieses Indikators ist neuerdings international der Trend zur Anglophonisierung der Lehre zu beobachten.
There is no denying that organizations, whether domestic or global, whether educational, governmental, or business, are undergoing rapid transformation. However, what is causing it? Prompted by the need to remain relevant and competitive, organizations constantly try to reinvent themselves. Those that do not, according to the laws of economics, will simply serve no purpose and will eventually cease to exist. Regardless of sector or industry, an organization's success pivots around its human talent. Hence, it is crucial to manage it and cultivate certain traits, knowledge, and skills. In today's global economy, organizations are more interconnected than ever before and thus the challenges they face require that employees possess not only expert knowledge, problem-solving, cross-cultural, and cross-functional teaming skills, but also good communications skills and agile thinking.
"Designed for digital" offers practical advice on digital transformation, with examples that include Amazon, BNY Mellon, DBS Bank, LEGO, Philips, Schneider Electric, USAA, and many other global organizations. Drawing on five years of research and in-depth case studies, the book is an essential guide for companies that want to disrupt rather than be disrupted in the new digital landscape.
Design thinking
(2019)
Design Thinking als eigenständige Disziplin gibt es bereits seit den sechziger Jahren, aber erst 2005 wurde die Managementlehre darauf aufmerksam. Seitdem wird das Konzept in der Wirtschaft und an den Hochschulen immer populärer, da sich "thinking like a designer" als erfolgreiche Methode erwiesen hat, um Innovationen anzustoßen und Probleme zu beseitigen. Zu den zahlreichen Anwendungsmöglichkeiten von Design Thinking zählt das Design neuer Produkte und Dienstleistungen, die Prozessentwicklung und -implementierung sowie die Organisationsgestaltung.
Der Halo-Effekt im Fußball
(2019)
Der Halo-Effekt ist eine aus der Sozialpsychologie bekannte kognitive Verzerrung. Er tritt dann auf, wenn ein globaler Eindruck oder eine Information über ein hervorstechendes Merkmal die Beurteilung anderer Eigenschaften prägt. Im vorliegenden Beitrag soll der Frage nachgegangen werden: Gibt es einen Halo-Effekt im Fußball? Überstrahlt der sportliche Erfolg bzw. Misserfolg eines Vereins andere sportliche Aspekte? Verzerrt der sportliche Erfolg bzw. Misserfolg die Wahrnehmung der Fans hinsichtlich nicht-sportlicher Aspekte?
Der Girlboss Mythos : die gesellschaftlichen und ökonomischen Perspektiven der Gender-Debatte
(2019)
Faktisch sind Frauen heute gleichberechtigt. Sie haben die gleichen Chancen, Rechte und Möglichkeiten wie Männer. Dennoch weisen maßgebliche Studien darauf hin, dass die Anzahl von Frauen auf allen Führungsebenen stagniert oder nur im Schneckentempo wächst. In der medialen Diskussion rund um das Thema Frauen im Management ist die Welt auf den ersten Blick in zwei Lager geteilt. Ein Lager stellt ernüchtert fest, dass Frauen selbst Schuld sind an ihrer Situation. Oft werden hier gerade erfolgreiche Frauen zitiert, die ihren Geschlechtsgenossinnen den nötigen Erfolgswillen oder die Opferbereitschaft absprechen. Das andere Lager scheint die Sachlage genau entgegengesetzt zu beurteilen. Überall gut ausgebildete, hochmotivierte Frauen, die an Glasdecken stoßen oder denen von der Gesellschaft im Allgemeinen und Männern im Besonderen die Türen versperrt werden. Dieses Buch trägt zu einer wissenschaftlich nüchternen Diskussion bei, um die aktuelle gesellschaftspolitische Situation differenzierter und abseits von abgegriffenen Dogmen zu betrachten.
Enterprises are presently transforming their strategy, culture, processes, and their information systems to become more digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT systems with many rather small and distributed structures, like Internet of Things or mobile systems. Since years a lot of new business opportunities appeared using the potential of the Internet and related digital technologies, like Internet of Things, services computing, cloud computing, big data with analytics, mobile systems, collaboration networks, and cyber physical systems. This has a strong impact for architecting digital services and products. The change from a closed-world modeling perspective to more flexible open-world composition and evolution of system architectures defines the moving context for adaptable systems, which are essential to enable the digital transformation. In this paper, we are focusing on a decision-oriented architectural composition approach to support the transformation for digital services and products.
The Eleventh International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2019), held between June 02, 2019 to June 06, 2019 - Athens, Greece, continued a series of international events covering a large spectrum of topics related to advances in fundamentals on databases, evolution of relation between databases and other domains, data base technologies and content processing, as well as specifics in applications domains databases.
Advances in different technologies and domains related to databases triggered substantial improvements for content processing, information indexing, and data, process and knowledge mining. The push came from Web services, artificial intelligence, and agent technologies, as well as from the generalization of the XML adoption.
High-speed communications and computations, large storage capacities, and loadbalancing for distributed databases access allow new approaches for content processing with incomplete patterns, advanced ranking algorithms and advanced indexing methods.
Evolution on e-business, ehealth and telemedicine, bioinformatics, finance and marketing, geographical positioning systems put pressure on database communities to push the ‘de facto’ methods to support new requirements in terms of scalability, privacy, performance, indexing, and heterogeneity of both content and technology.
We welcomed academic, research and industry contributions. The conference had the followingtracks:
Knowledgeanddecisionbase
Databasestechnologies
Datamanagement
GraphSM: Large-scale Graph Analysis, Management and Applications
For the widespread establishment of a circular economy, the acceptance of used products among consumers is a prerequisite. This paper investigates the customer experience of product service systems related to used products (PSSuP), such as renting, remanufacturing, and second-hand models, and aims to point out the offering characteristics that effect customer response and customer engagement. This study was conducted by means of a content analysis-based literature review of 69 empirical PSSuP studies. A frequency analysis of the categories that determine customer experience creation was conducted, as well as a contingency analysis to reveal the interrelationship between these categories. On this basis, the different PSSuP types were compared, and four strategic orientations of customer experience creation in PSSuP are pointed out: price, confidence, convenience, and delight orientation. For each of these strategic orientations, supportive PSSuP offering characteristics are specified. Building on the findings of this study, theoretical and managerial implications for product–service systems marketing are pointed out, and the need for research on the role of information and communication technology as an enabler of customer experience creation in PSSuP is highlighted.
Successful digital offerings are created at the intersection of what technologies can deliver and what customers want and will pay for. That point of intersection, however, has proved to be elusive. To find it, companies must experiment repeatedly, cocreate with customers, and assemble cross-functional development teams - and the insights gleaned along the way must be shared internally.
In this article, we discuss how several of the nearly 200 companies we've studied have built and exercised these capabilities. We also take a close look at how one company, Schneider Electric, is using them to acquire and share customer insights.
Der vorliegende Beitrag zeigte die Anwendung eines Extended Kalman Filters für die Beurteilung des Verschleißzustandes von Rollenketten. Anders als in den üblicherweise eingesetzten signalbasierten Verfahren wurde damit ein modellbasierter Ansatz gewählt. Der Einsatz des Extended Kalman Filters ermöglicht die Schätzung von Parametern eines reduzierten Kettenmodells, das die Dynamik der einzigen Messgröße, nämlich des Drehmoments des antreibenden Motors näherungsweise nachbildet. Im Beitrag wurde dieses Verfahren auf Messdaten aus vier Dauerversuchen an Rollenketten eingesetzt und gezeigt, dass mit steigendem Verschleiß eine Änderung ausgewählter Modellparameter erfolgt.
Diese Vorgehensweise ist ein erster Ansatz, der durch weitere Forschungsarbeiten noch verbessert werden muss. In zukünftigen Forschungsarbeiten wird zusätzlich zur Parameterschätzung eine Prädiktion durchgeführt, um einen Schätzwert für die Restlebensdauer zu erhalten. Hierzu gibt es Ansätze in der Literatur, die auf das konkrete Problem angepasst werden müssen. Zudem muss die Modellierungssystematik so erweitert werden, dass Wissen über das Prozessverhalten in die Modellierung mit eingebracht wird, um die Aussagekraft der Ergebnisse sowie die Robustheit des Verfahrens bezüglich Betriebsparametern, Umgebungsbedingungen und Exemplarstreuungen zu verbessern.
Many researchers have explored the phenomenon of intercultural communication since Edward T. Hall first brought it to light in the late 1950s. Although the literature is quite extensive, the ongoing sociopolitical struggles are evidence that even in the twenty-first century, society has limited intercultural as well as intracultural communication competence. This limited understanding continues to bring about discord in every facet of life, including work.
The modern workforce is expected to possess certain knowledge, skills, and attitudes that are inherently different from those expected from previous generations. Due to globalization, intercultural competence and highly effective communication skills are at the top of the list - a working knowledge of English as the lingua franca of today's business world can be considered as a first step.
The metric and qualitative analysis of models of the upper and lower dental arches is an important aspect of orthodontic treatment planning. Currently available eLearning systems for dental education only allow access to digital learning materials, and do not interactively support the learning progress. Moreover, to date no study compared the efficiency of learning methods based on physical or digital study models. For this pilot study, 18 dental students were separated into two groups to investigate whether the learning success in study model analysis with an interactive elearning system is higher based on digital models or on conventional plaster models. The results show that with the digital method less time is needed per model analysis. Moreover, the digital approach leads to higher total scores than that based on plaster models. We conclude that interactive eLearning using digital dental arch models is a promising tool for dental education.
Cleanable bag filter : comparisons of different testing methods of ageing of filter materials
(2019)
Cleanable bag filters are used to separate dust and other airborne particulate systems. Due to typical process conditions, they are subject to thermal, chemical and mechanical stress during use. The main objective of the IGF project no. 18307 "Investigation of the chemical and thermal degradation of cleanable filter media and improvement of their resistance by surface modification", was the development of a valid test method which can reproduce degradation caused by high temperatures and aggressive chemical atmospheres in a practice-oriented but time-saving manner. Within the IGF project, 2 accelerated ageing methods were applied, both of which have the decisive advantage of investigating damage in the gas phase. Many resistances of filter materials are otherwise carried out by immersing the materials in a mostly liquid damage medium at a defined temperature. These resistances are difficult to transfer ageing in the gas phase.
Candidate experience
(2019)
Anders als Digital-ICs, die hochautomatisiert entworfen werden können, ist der Entwurf analoger ICs bis heute Handarbeit. Übliche auf Optimierung basierende Automatisierungsverfahren scheitern. Die Ursachen wurden jetzt in einem Forschungsprojekt untersucht, um neue Ansätze zur Entwurfsautomatisierung analoger ICs abzuleiten.
Bei der spanenden Bearbeitung metallischer Werkstücke ist Verschleiß der Werkzeuge entscheidend für die Qualität der erzeugten Bauteiloberflächen und die Kosten der eingesetzten Werkzeuge. Damit ist der Werkzeugverschleiß und dessen Ursachen maßgebliches Auflegungskriterium für die Zerspanprozesse. Verschleiß wird dabei durch eine Vielzahl unterschiedlicher Parameter beeinflusst. Neben dem Werkstückwerkstoff, dem Schneidstoff und der Beschichtung sowie der Werkzeuggeometrie, sind die Schnittgeschwindigkeit, der Vorschub, die radiale und axiale Zustellung und die Prozessmedien ausschlaggebend für die Standzeit der Werkzeuge. Weitere Effekte gehen von den Eigenschaften des Werkstücks, Werkzeugs und der Maschinen aus. diese sind verantwortlich für die Entstehung von durch Instabilitäten verursachten Verschleiß. Im Folgenden wird die Systematik der Untersuchung unterschiedlich additivierter Kühlschmierstoffe auf den Verschleiß untersucht.
We report an investigation into the distribution of copper oxidation states in oxide films formed on the surfaces of technical copper. The oxide films were grown by thermal annealing at ambient conditions and studied using Auger depth profiling and UV–Vis spectroscopy. Both Auger and UV–Vis data were evaluated applying multivariate curve resolution (MCR). Both experimental techniques revealed that the growth of Cu2O dominates the initial ca. 40 nm of oxide films grown at 175 °C, while further oxide growth is dominated by CuO formation. The largely coincident results from both experimental approaches demonstrates the huge benefit of the application of UV–Vis spectroscopy in combination with MCR analysis, which provides access to information on chemical state distributions without the need for destructive sample analysis. Both approaches are discussed in detail.
Based on a survey among customers of seven German municipal utilities, we estimate hierarchical multiple regression models to identify consumer motivations for participating in P2P electricity trading and develop implications for marketing strategies for this currently relatively unknown product. Our results show a low importance of socio-demographics in explaining differences between consumer groups, but high influence of attitudes, knowledge and likelihood to purchase related products. The most valuable target groups for P2P electricity trading marketing strategies of municipal utilities first and foremost should aim at are innovators, especially prosumers. They are well-informed about and open minded concerning electricity sharing and highly environmentally aware. They ask for transparency and are willing to purchase related products. They are attracted by the ability to share generation and consumption and to a lesser extent by economic reasons. Our results indicate that the marketing efforts should to a special degree take peer effects into account, as they are found to wield great influence on general openness towards and purchase intention for P2P electricity products. Finally, municipal utilities should build on the high level of satisfaction and trust of consumers and use P2P electricity trading as measure to keep and win customers willing to change their supplier.
Die anwendungsneutrale und vorsorgliche Verkabelung gibt es bereits seit über 25 Jahren. Die Materie ist zunehmend komplexer geworden. Das ursprünglich für die informationstechnische Vernetzung von Büros vorgesehene Konzept hat sich mit den Jahren auf weitere Anwendungsbereiche, z. B. in Rechenzentren und in industriell oder privat genutzten Bereichen ausgeweitet. Dabei hat jeder Anwendungsbereich neben einem allgemeinen Anforderungsprofil auch ein eigenes, spezifisches Regelwerk. Aufgrund der fortschreitenden Digitalisierung ist zudem eine ständige technologische Anpassung und Weiterentwicklung des Leistungsvermögens vonnöten. Vor diesem Hintergrund wird es zunehmend schwierig, die umfangreichen Normenwerke zu lesen, im Zusammenspiel zu begreifen und optimal anzuwenden.
Und genau hier setzt das Buch an! In dem vorliegenden Buch wird die Kommunikationskabelanlage von der Idee über die Planung, die Spezifizierung, Realisierung, Inbetriebnahme bis hin zur Wartung anschaulich und im Zusammenhang erläutert. Kernstück ist die Vorstellung und Beschreibung der aktuellen Normenreihen DIN EN 50173 (VDE 0800-173) und DIN EN 50174 (VDE 0800-174). Nachdem zunächst auf die Standortvoraussetzungen eingegangen wird, folgen die allgemeinen und spezifischen Anforderungen an informationstechnische Verkabelungen und die verwendeten Komponenten, Kabel bzw. Steckverbinder und zu guter Letzt die Planung, Spezifizierung, Umsetzung und messtechnische Bewertung der Installation. Den Autoren ist es dabei ein Anliegen, nicht nur das Grundverständnis zu den relevanten Anforderungsprofilen zu vermitteln, sondern auch den Blick für den Gesamtzusammenhang, beispielsweise zur Zukunftssicherheit und zum Einfluss unterschiedlicher Umweltbedingungen auf die Auslegung der Verkabelungskomponenten, zu behalten.
Die Faszination des "Touchpoint Airport" und der Trend hin zu immer mehr Mobilität machen Flughäfen für die werbungtreibende Wirtschaft zunehmend interessanter. Das belegen die Wachstumsraten der Out-of-Home-Werbung an Flughäfen und die Investitionen der Airports in analoge wie innovative digitale Medien. Der Grund dafür ist einfach: überdurchschnittlich kaufkräftige Zielgruppen lassen sich mit Flughafenwerbung über ihre gesamte Customer-Journey in einem besonderen Umfeld emotional ansprechen. Starken Brands bieten Airports die ideale Bühne für eine nachhaltige Markeninszenierung. Doch wie genau funktioniert Airport-Werbung, für welche Unternehmen eignet sich ein werblicher Auftritt am Flughafen, welche Zielgruppen lassen sich am Airport erreichen und wer sind die kompetenten Ansprechpartner für Airport-Werbung? Diese und viele weitere Fragen beantwortet das Jahrhuch Aiport Marketing 2020.
Abreinigbare Schlauchfilter kommen zur Abscheidung von Stäuben sowie staubförmigen Substanzen zum Einsatz. Aufgrund typischer Prozessbedingungen unterliegen sie während ihres Einsatzes thermischer, chemischer und mechanischer Beanspruchung. Das IGF-Projekt Nr. 18307 "Untersuchung der chemischen und thermischen Degradation von abreinigbaren Filtermedien und Verbesserung deren Beständigkeit durch Oberflächenmodifikation" hat mehrere Prüfmethoden verglichen.
Size and function of bioartificial tissue models are still limited due to the lack of blood vessels and dynamic perfusion for nutrient supply. In this study, we evaluated the use of cytocompatible methacryl-modified gelatin for the fabrication of a hydrogel-based tube by dip-coating and subsequent photo-initiated cross-linking. The wall thickness of the tubes and the diameter were tuned by the degree of gelatin methacryl-modification and the number of dipping cycles. The dipping temperature of the gelatin solution was adjusted to achieve low viscous fluids of approximately 0.1 Pa s and was different for gelatin derivatives with different modification degrees. A versatile perfusion bioreactor for the supply of surrounding tissue models was developed, which can be adaped to several geometries and sizes of blood-vessel mimicking tubes. The manufactured bendable gelatin tubes were permeable for water and dissolved substances, like Nile Blue and serum albumin. As a proof of concept, human fibroblasts in a three-dimensional collagen tissue model were sucessfully supplied with nutrients via the central gelatin tube under dynamic conditions for 2 days. Moreover, the tubes could be used as scaffolds to build-up a functional and viable endothelial layer. Hence, the presented tools can contribute to solving current challenges in tissue engineering.