Refine
Document Type
- Journal article (1241)
- Conference proceeding (1036)
- Book chapter (381)
- Book (223)
- Doctoral Thesis (54)
- Working Paper (37)
- Anthology (32)
- Report (25)
- Patent / Standard / Guidelines (24)
- Issue of a journal (19)
Is part of the Bibliography
- yes (3081)
Institute
- ESB Business School (1103)
- Informatik (873)
- Technik (509)
- Life Sciences (343)
- Texoversum (219)
- Zentrale Einrichtungen (16)
Publisher
- Springer (346)
- IEEE (250)
- Elsevier (220)
- Hochschule Reutlingen (186)
- MDPI (98)
- Springer Gabler (79)
- Gesellschaft für Informatik (66)
- Universitätsbibliothek Tübingen (59)
- Wiley (54)
- ACM (40)
Hauptziel des Projektes war zum einen die Entwicklung einer validen Testmethode auf Grundlage vorliegender Normen, welche die in der betrieblichen Praxis auftretende Degradation abreinigbarer Filtermedien (hohe Temperaturen, aggressive chemische Atmosphären) praxisnah abbilden kann. Die Methode sollte auch die mechanische Alterung der Medien durch Staubbeaufschlagung sowie Abreinigungs Druckstöße berücksichtigen (DIN ISO 11057). Innerhalb des Projektes konnten umfangreiche Praxiserfahrungen mit der Inbetriebnahme und dem Betrieb einer schadgasbeaufschlagten, temperierbaren Testkammer zur chemischen Alterung von Filtermedien auf Grundlage der Vorgaben der DIN EN ISO 16891 gewonnen werden. Sollen vergleichbare Prüfdaten für mehrere Proben verlässlich ermittelt werden, sind bei den Untersuchungen demnach umfangreiche Randbedingungen zu beachten. Insbesondere zeigten die Untersuchungen den hohen technischen Aufwand zur Durchführung der Filtertests auf, welche nicht zuletzt auch aufgrund der erforderlichen Sicherheitstechnik und langen Untersuchungsdauer eine Umsetzung insbesondere bei KMU aus wirtschaftlichen Gründen erschwert ist. Es konnte weiter dargestellt werden, dass die Kombination von chemisch-thermischer und mechanisch(-thermischer) Alterung durch den Einsatz verschiedener Prüfeinrichtungen grundsätzlich umsetzbar ist. Die im Rahmen des Vorhabens entwickelte Testmethode einer chemischen Alterung der Filtermatrices durch Gasphasenexposition in einer Druckkammer ermöglicht kürzere Beanspruchungszeiträume bei reduziertem zu behandelnden Schadgasanfall und kann damit den wirtschaftlichen Betrieb eines entsprechenden Prüfstandes ermöglichen. Kombiniert mit der externen mechanischen Alterung durch Staubbeaufschlagung und Möglichkeit der parallelen Temperaturaufprägung gem. EN ISO 16891 auf mehrere Filtermedien-Proben lässt sich das thermisch, chemisch und mechanisch induzierte Degradationsverhalten von Filtermedien ggf. realitätsnah und mit wirtschaftlich vertretbarem Aufwand in eine Prüfvorschrift überführen. Entsprechende Validierungsarbeiten sind Bestandteil eines aktuell gestarteten Folgeprojektes. Das zweite Hauptziel des Projektes war es Ausrüstungen zu entwickeln, die zu einer verbesserten Beständigkeit gegenüber aggressiven Komponenten führen. Die Ergebnisse zeigten, dass mit dem Sol-Gelverfahren mechanisch stabile Beschichtungen auf Faservlies dauerhaft aufgetragen werden konnten, welche insbesondere die chemisch induzierte Degradation von Aramiden reduzieren können. Bei Aramiden handelt es sich um relativ teure Hochleistungsmaterialien, von welchen bekannt ist, dass ihre Beständigkeit sowohl gegen über UV-Strahlung als auch unterschiedlichen Schadgasen gering ist. Daher stellen die Beständigkeit der Materialien verbessernde Ausrüstungen eine wichtige Entwicklung für Unternehmen dar, um auf diese Weise beständigere Aramid-basierte Produkte zu erhalten. Als besonders geeignet stellten sich dabei Fluorcarbonausrüstungen, organisch-anorganische Hybride auf Basis von GPTMS und Zirkonium-haltige Ausrüstungen heraus.
A transaction is a demarcated sequence of application operations, for which the following properties are guaranteed by the underlying transaction processing system (TPS): atomicity, consistency, isolation, and durability (ACID). Transactions are therefore a general abstraction, provided by TPS that simplifies application development by relieving transactional applications from the burden of concurrency and failure handling. Apart from the ACID properties, a TPS must guarantee high and robust performance (high transactional throughput and low response times), high reliability (no data loss, ability to recover last consistent state, fault tolerance), and high availability (infrequent outages, short recovery times).
The architectures and workhorse algorithms of a high-performance TPS are built around the properties of the underlying hardware. The introduction of nonvolatile memories (NVM) as novel storage technology opens an entire new problem space, with the need to revise aspects such as the virtual memory hierarchy, storage management and data placement, access paths, and indexing. NVM are also referred to as storage-class memory (SCM).
Active storage
(2018)
In brief, Active Storage refers to an architectural hardware and software paradigm, based on collocation storage and compute units. Ideally, it will allow to execute application-defined data ... within the physical data storage. Thus Active Storage seeks to minimize expensive data movement, improving performance, scalability, and resource efficiency. The effective use of Active Storage mandates new architectures, algorithms, interfaces, and development toolchains.
Blockchains yield to new workloads in database management systems and K/V-stores. Distributed Ledger Technology (DLT) is a technique for managing transactions in ’trustless’ distributed systems. Yet, clients of nodes in blockchain networks are backed by ’trustworthy’ K/V-Stores, like LevelDB or RocksDB in Ethereum, which are based on Log-Structured Merge Trees (LSM Trees). However, LSM-Trees do not fully match the properties of blockchains and enterprise workloads.
In this paper, we claim that Partitioned B-Trees (PBT) fit the properties of this DLT: uniformly distributed hash keys, immutability, consensus, invalid blocks, unspent and off-chain transactions, reorganization and data state / version ordering in a distributed log-structure. PBT can locate records of newly inserted key-value pairs, as well as data of unspent transactions, in separate partitions in main memory. Once several blocks acquire consensus, PBTs evict a whole partition, which becomes immutable, to secondary storage. This behavior minimizes write amplification and enables a beneficial sequential write pattern on modern hardware. Furthermore, DLT implicate some type of log-based versioning. PBTs can serve as MV-store for data storage of logical blocks and indexing in multi-version concurrency control (MVCC) transaction processing.
Modern persistent Key/Value stores are designed to meet the demand for high transactional throughput and high data ingestion rates. Still, they rely on backwards-compatible storage stack and abstractions to ease space management, foster seamless proliferation and system integration. Their dependence on the traditional I/O stack has negative impact on performance, causes unacceptably high write-amplification, and limits the storage longevity.
In the present paper we present NoFTL KV, an approach that results in a lean I/O stack, integrating physical storage management natively in the Key/Value store. NoFTL-KV eliminates backwards compatibility, allowing the Key/Value store to directly consume the characteristics of modern storage technologies. NoFTLKV is implemented under RocksDB. The performance evaluation under LinkBench shows that NoFTL-KV improves transactional throughput by 33%, while response times improve up to 2.3x. Furthermore, NoFTL KV reduces write-amplification 19x and improves storage longevity by imately the same factor.
Background: Internationally, teledermatology has proven to be a viable alternative to conventional physical referrals. Travel cost and referral times are reduced while patient safety is preserved. Especially patients from rural areas benefit from this healthcare innovation. Despite these established facts and positive experiences from EU neighboring countries like the Netherlands or the United Kingdom, Germany has not yet implemented store-and-forward teledermatology in routine care.
Methods: The TeleDerm study will implement and evaluate store-and-forward teledermatology in 50 general practitioner (GP) practices as an alternative to conventional referrals. TeleDerm aims to confirm that the possibility of store-and-forward teledermatology in GP practices is going to lead to a 15% (n = 260) reduction in referrals in the intervention arm. The study uses a cluster-randomized controlled trial design. Randomization is planned for the cluster “county”. The main observational unit is the GP practice. Poisson distribution of referrals is assumed. The evaluation of secondary outcomes like acceptance, enablers and barriers uses a mixed methods design with questionnaires and interviews.
Discussion: Due to the heterogeneity of GP practice organization, patient management software, information technology service providers, GP personal technical affinity and training, we expect several challenges in implementing teledermatology in German GP routine care. Therefore, we plan to recruit 30% more GPs than required by the power calculation. The implementation design and accompanying evaluation is expected to deliver vital insights into the specifics of implementing telemedicine in German routine care.
We present an approach for segmenting individual cells and lamellipodia in epithelial cell clusters using fully convolutional neural networks. The method will set the basis for measuring cell cluster dynamics and expansion to improve the investigation of collective cell migration phenomena. The fully learning-based front-end avoids classical feature engineering, yet the network architecture needs to be designed carefully. Our network predicts how likely each pixel belongs to one of the classes and, thus, is able to segment the image. Besides characterizing segmentation performance, we discuss how the network will be further employed.
This work is a report on practical experiences with the issue of interoperability in German practice management systems (PMSs) from an ongoing clinical trial on teledermatology, the TeleDerm project. A proprietary and established web-platform for store-and-forward telemedicine is integrated with the IT in the GPs’ offices for automatic exchange of basic patient data. Most of the 19 different PMSs included in the study sample lack support of modern health data exchange standards, therefore the relatively old but widely available German health data exchange interface “Gerätedatentransfer” (GDT) is used. Due to the lack of enforcement and regulation of the GDT standard, several obstacles to interoperability are encountered. As a partial, but reusable working solution to cope with these issues, we present a custom middleware which is used in conjunction with GDT. We describe the design, technical implementation and observed hindrances with the existing infrastructure. A discussion on health care interfacing standards and the current state of interoperability in German PMS software is given.
Impact of phenolic resin preparation on its properties and its penetration behavior in Kraft paper
(2018)
The core of decorative laminates is generally made of stacked Kraft paper sheets impregnated with a phenolic resin. As the impregnation process in industry is relatively fast, new methods need to be developed to characterize it for different paper-resin systems. Several phenolic resins were synthesized with the same Phenol:Formaldehyde ratio of 1:1.8 and characterized by Fourier Transform Infrared Spectrometry (FTIR) as well as Size-Exclusion Chromatography (SEC). In addition, their viscosities and surface tensions when diluted in methanol to 45% of solid content were measured. The capacity of each resin to penetrate a Kraft paper sheet was characterized using a new method, which measures the conductivities induced by the liquid resin crossing the paper substrate. With this method, crossing times could be measured with a good accuracy. Surprisingly, the results showed that the penetration time of the resin samples is not correlated to the viscosity values, but rather to the surface tension characteristics and the chemical characteristics of paper. Furthermore, some resins had a higher swelling effect on the fibers that delayed the crossing of the liquid through the paper.
Functionalised particles are highly requested in materials research, as they can be used as vital components in many advanced applications such as smart materials, functional coatings, drug carrier systems or adsorption materials. In this study, furan-functionalised melamine-formaldehyde (MF) particles were successfully prepared for the first time using an organic sol-gel process. Commercially available 2-Aminomethylfuran (AMF) and 2-Aminomethyl-5-methylfuran (AMMF) were used as modifying agents. In the isolated polymer particles, a melamine (M) to modifying agent ratio of M:AMF mol/mol 2.04:1 and M:AMMF ratio of mol/mol 1.25:1 was used. The obtained particles were isolated in various centrifugation and re-dispersion cycles and analysed using ATR-FT-IR, Raman and solid state 13C NMR spectroscopy, TGA, SEM and DSC measurements. Upon functionalisation the size of the MF particles increased (MF 1.59 µm, 27% CV (coefficient of variation); MF-AMF 2.56 µm, 25% CV; MF-AMMF 2.20 µm, 35% CV). DSC measurements showed that another type of exothermic residual reactivity besides condensation-based curing takes place with the furan-modified particles that is not related to the liberation of volatile compounds. The newly obtained particles are able to undergo Diels-Alder reactions with maleimide groups. The characteristic IR and Raman absorbance bands of the reaction products after the particles were reacted with 4,4′-Diphenylmethanebismaleimide reagent confirm the formation of a Diels-Alder adduct.
Properties data of phenolic resins synthetized for the impregnation of saturating Kraft paper
(2018)
The quality of decorative laminates boards depends on the impregnation process of Kraft papers with a phenolic resin,which constitute the raw materials for the manufacture of the cores of such boards.In the laminates industries,the properties of resins are adapted via their syntheses,usually by mixing phenol and formaldehyde in a batch,where additives,temperature and stirring parameters can be controlled. Therefore, many possibilities of preparation and phenolic resins exist, that leads to different combinations of physico chemical properties. In this article, the properties data of eight phenolic resins synthetized with different parameters of pH and reaction times at 60 °C and 90 °C are presented: the losses of pH after synthesis and the dynamic viscosities measured after synthesis and one the solid content is adjusted to 45%w/w in methanol. Data aquired by Differential Scanning Calorimetry (DSC) of the resins and Inverse Gas Chromatography (IGC) of cured solids are given as well.
The current paper studies the influence of geometrical parameters of the fused deposition modeling (FDM) - fused filament fabrication (FFF) 3D printing process on printed part strength for open source desktop 3D printers and the most popular material used for that purpose - i.e., polylactic acid (PLA). The study was conducted using a set of different nozzles (0.4, 0.6, and 0.8 mm) and a range of layer heights from the minimum to maximum physical limits of the machine. To assess print strength, a novel assessment method is proposed. A tubular sample is loaded in the weakest direction (across layers) in a three point bending fixture. Mesostructure evaluation through scanning electronic microscopy (SEM) scans of the samples was used to explain the obtained results. We detected a significant influence of geometric process parameters on sample mesostructure, and consequently, on sample strength.
Lots of movies are produced every year, too many to watch all of them and in particular, to get an overview about the evolution of typical movie genres and actors playing in them. Moreover, it is a challenging problem to detect correlations among the movies and the actors in those movies, in particular, if we are interested in time-varying data patterns like trends, countertrends, or anomalies and outliers. Those correlations are specifically interesting if they can be inspected on different levels of granularity, e.g., temporal, but also hierarchical in form of country- or continent-based correlations. In this paper we describe the IMDb Explorer, a webbased visualization tool that consists of two major views denoted by the movie cosmos and the career lines. Both views are linked and interactively manipulable while a list of user-defined metrics are explorable. We illustrate the usefulness of the visualization tool by applying it to the entire movie database provided by IMDb.
Workshops and tutorials
(2018)
The 19th International Conference on Product-Focused Software Process Improvement (PROFES 2018) hosted two workshops and three tutorials. The workshops and tutorials complemented and enhanced the main conference program, offering a wider knowledge perspective around the conference topics. The topics of the two workshops were Hybrid Development Approaches in Software Systems Development (HELENA) and Managing Quality in Agile & Rapid Software Development Processes (QUaSD). The topics of the tutorials were The human factor in agile transitions – using the personas concept in agile oaching, Process Management 4.0 – Best Practices, and Domain-specific languages for specification, development, and testing of autonomous systems.
Being able to monitor the heart activity of patients during their daily life in a reliable, comfortable and affordable way is one main goal of the personalized medicine. Current wearable solutions lack either on the wearing comfort, the quality and type of the data provided or the price of the device. This paper shows the development of a Textile Sensor Platform (TSP) in the form of an electrocardiogram (ECG)-measuring T-shirt that is able to transmit the ECG signal to a smartphone. The development process includes the selection of the materials, the design of the textile electrodes taking into consideration their electrical characteristics and ergonomy, the integration of the electrodes on the garment and their connection with the embedded electronic part. The TSP is able to transmit a real-time streaming of the ECG-signal to an Android smartphone through Bluetooth Low Energy (BLE). Initial results show a good electrical quality in the textile electrodes and promising results in the capture and transmission of the ECG signal. This is still a working- progress and it is the result of an interdisciplinary master project between the School of Informatics and the School of Textiles & Design of the Reutlingen University.
In der Vergangenheit ist der Materialfluss meist mit der Produktion gewachsen. Mit steigender Produkt-Individualität erhöht sich die Anzahl der zu fertigenden Varianten in der Produktion und somit die Komplexität der Materialflüsse. Im Rahmen dieser Arbeit wurden Möglichkeiten und Methoden zur Aufnahme und Optimierung von Materialflüssen im Zusammenhang mit hoher Variantenvielfalt untersucht.
The increasing heterogenecity of students at German Universities of Applied Sciences and the growing importance of digitization call for a rethinking of teaching and learning within higher education. In the next years, changing the learning ecosystem by developing and reflecting upon new teaching and learning techniques using methods of digitalization will be both - most relevant and very challenging. The following article introduces two different learning scenarios, which exemplify the implementation of new educational models that allow discontinuity of time and place, technology and process in teaching and learning. Within a blended learning apporach, the first learning scenario aims at adapting and individualizing the knowledge transfer in the course Foundations of Computer Science by providing knowledge individually and situation-specifically. The second learning scenario proposes a web-based tool to facilitate digital learning environments and thus digital learning communities and the possibility of computer-supported learning. The overall aim of both learning scenarios is to enhance learning for diverse groups by providing a different smart learning ecosystem in stepping away from a teacher-based to a student-centered approach. Both learning scenarios exemplarily represent the educational vision of Reutlingen University - its development into an interactive university.
A series of novel biomedical TPCUs with different percentages of hard segment and a silicone component in the soft segment were synthesized in a multi stage one-pot method. The kinetic profiles of the urethane formation in TPCU-based copolymer systems were monitored by rheological, in line FTIR spectroscopic (React IR) and real-time calorimetric (RC1) methods. This process-analytically monitored multi step synthesis was successfully used to optimize the production of medical-grade TPCU elastomers on preparative scale (in lots of several kg) with controlled molecular structure and mechanical properties. Various surface and bulk analytical methods as well as systematic studies of the mechanic response of the elastomer end-products towards compression and tensile loading were used to estimate the bio-stability of the prepared TPCUs in vitro after 3 months. The tests suggested that high bio-stability of all polyurethane formulations using accelerating in vitro test can be attributed to the synthetic design as well as to the specific techniques used for specimen preparation, namely: (1) the annealing for reducing residual polymer surface stress and preventing IES, (2) stabilization of the morphology by long time storage of the specimens after processing before being immersed in the test liquids, (3) purification by extraction to remove the shot chain oligomers which are the most susceptible to degradation. All mechanical tests were performed on cylindrical and circular disc specimens for modelling the thickness of the meniscus implants under application-relevant stress conditions.
So far, only few authors addressed the serum-free, defined differentiation of adipocytes. And there are hardly any trials available on the defined maintenance of adipocytes. In this study, the development of a defined culture medium for the adipogenic differentiation of primary human adipose-derived stem cells (ASCs) was aimed. Based on the addition of specific factors for the replacement of serum, ASCs were differentiated to viable and characteristic adipocytes for 14 days, which was proven through the accumulation of lipids, the expression of perilipin A and by the release of leptin and glycerol. Furthermore, a defined maintenance medium was developed, which supported the maturation and stability of cells for a long-term period of additional 42 days until day 56.
This paper addresses what we call the investment question: under what plausible circumstances, if any, can variable renewable energy (VRE, and solar photovoltaic (PV) in particular) be a good investment? Although VRE has been growing rapidly world-wide, it is generally subsidized. Under what cost and market conditions can solar PV flourish without subsidy? We employ solar insolation and market price data from the U.S. and from Germany to gain insight into the investment question. We find that unsubsidized solar PV is or may soon be a justifiable investment, but that market arrangements may play a crucial role in determining success. We end by sketching a proposal that amounts to a reformed capacity market that would afford participation of solar PV.
In this presentation the audience will be: (a) introduced to the aims and objectives of the DBTechNet initiative, (b) briefed on the DBTech EXT virtual laboratory workshops (VLW), i.e. the educational and training (E&T) content which is freely available over the internet and includes vendor-neutral hands-on laboratory training sessions on key database technology topics, and (c) informed on some of the practical problems encountered and the way they have been addressed. Last but not least, the audience will be invited to consider incorporating some or all of the DBTech EXT VLW content into their higher education (HE), vocational education and training (VET), and/or lifelong learning/training type course curricula. This will come at no cost and no commitment on behalf of the teacher/trainer; the latter is only expected to provide his/her feedback on the pedagogical value and the quality of the E&T content received/used.
Zur Entwicklung einer Sofortpreiskalkulation für CNC-Drehteile werden Machine-Learning-Ansätze sowie ein deterministischer Algorithmus untersucht. Der deterministische Algorithmus funktioniert ausschließlich für Drehteile mit geringer Komplexität. Die Machine Learning Modelle hingegen sind zukunftsfähiger, da die ersten Ergebnisse bereits sehr geringe Abweichungswerte zu den festgelegten Referenzpreisen erreichen können. Mit steigendem Datenaufkommen können beide Machine-Learning-Modelle mit geringem Aufwand weiter verbessert werden.
Die Segmentierung und das Tracking von minimal-invasiven robotergeführten Instrumenten ist ein wesentlicher Bestandteil für verschiedene computer assistierte Eingriffe. Allerdings treten in der minimal-invasiven Chirurgie, die das Anwendungsfeld für den hier beschriebenen Ansatz darstellt, häufig Schwierigkeiten durch Reflexionen, Schatten oder visuelle Verdeckungen durch Rauch und Organe auf und erschweren die Segmentierung und das Tracking der Instrumente.
Dieser Beitrag stellt einen Deep Learning Ansatz für ein markerloses Tracking von minimal-invasiven Instrumenten vor und wird sowohl auf simulierten als auch realen Daten getestet. Es wird ein simulierter als auch realer Datensatz mit Ground Truth Kennzeichnung für die binäre Segmentierung von Instrument und Hintergrund erstellt. Für den simulierten Datensatz werden Bilder aus einem simulierten Instrument und realem Hintergrund zusammengesetzt. Im Falle des realen Datensatzes spricht man von der Zusammensetzung der Bilder aus einem realen Instrument und Hintergrund. Insgesamt wird auf den simulierten Daten eine Pixelgenauigkeit von 94.70 Prozent und auf den realen Daten eine Pixelgenauigkeit von 87.30 Prozent erreicht.
Die minimal-invasive Chirurgie (MIC) entwickelt sich durch den Einsatz von medizinischen Robotern wie dem da Vinci System von Intuitive Surgical stetig weiter. Hierdurch kann eine bessere oder gleichwertige Operation bei deutlich geringerer körperlicher Belastung des Operateurs erreicht werden. Dabei entstehen jedoch neue Problemstellungen wie beispielsweise Kollision zwischen Roboterarmen und die benötigte Zeit zum Einrichten einer geeigneten Roboterkonfiguration. Daher ist eine effiziente Vorbereitung und Planung der Interventionen erforderlich. Diese Arbeit präsentiert einen Ansatz für eine verbesserte Planung mit Augmented Reality (AR) und einer Robotik Simulationssoftware (RS). Die Robotik Simulation dient zur Berechnung einer Roboterkonfiguration unter Vorgabe der Port-Positionen. Augmented Reality wird verwendet, um die berechneten Pose in der realen Umgebung zu visualisieren und somit leichter in den Operationssaal zu übertragen.
The focus of the developed maturity model was set on processes. The concept of the widespread CMM and its practices has been transferred to the perioperative domain and the concept of the new maturity model. Additional optimization goals and technological as well as networking-specific aspects enable a process- and object-focused view of the maturity model in order to ensure broad coverage of different subareas. The evaluation showed that the model is applicable to the perioperative field. Adjustments and extensions of the maturity model are future steps to improve the rating and classification of the new maturity model.
A shift in attitudes to purchasing departments can be perceived. No longer is the chief goal solely to reduce costs; the procurement function is assuming strategic relevance in the business model, leveraging the supplier as a foundation for innovation. The knowledge accumulated by suppliers is accessed over the journey of long-term partnerships to streamline business practice. Businesses are finding themselves in increasingly competitive environments, and thus need to address inefficiencies in supplier management. “Procurement 4.0” is a concept used in discussing digitalisation in business processes, referring to the process of supplier relationship management and optimisation. This model and its application to supplier relationship management will be the focus of this article. Realising the efficiencies to be obtained in buyer-supplier relationships through “Procurement 4.0” will be explored, primarily through an emphasis on digitalisation of the relationship between the procurement department and supplier.
Modern web-based applications are often built as multi-tier architecture using persistence middleware. Middleware technology providers recommend the use of Optimistic Concurrency Control (OCC) mechanism to avoid the risk of blocked resources. However, most vendors of relational database management systems implement only locking schemes for concurrency control. As consequence a kind of OCC has to be implemented at client or middleware side.
A simple Row Version Verification (RVV) mechanism has been proposed to implement an OCC at client side. For performance reasons the middleware uses buffers (cache) of its own to avoid network traffic and possible disk I/O. This caching however complicates the use of RVV because the data in the middleware cache may be stale (outdated). We investigate various data access technologies, including the new Java Persistence API (JPA) and Microsoft’s LINQ technologies for their ability to use the RVV programming discipline.
The use of persistence middleware that tries to relieve the programmer from the low level transaction programming turns out to even complicate the situation in some cases.Programmed examples show how to use SQL data access patterns to solve the problem.
Transaction processing is of growing importance for mobile computing. Booking tickets, flight reservation, banking, ePayment, and booking holiday arrangements are just a few examples for mobile transactions. Due to temporarily disconnected situations the synchronisation and consistent transaction processing are key issues. Serializability is a too strong criteria for correctness when the semantics of a transaction is known. We introduce a transaction model that allows higher concurrency for a certain class of transactions defined by its semantic. The transaction results are ”escrow serializable” and the synchronisation mechanism is non-blocking. Experimental implementation showed higher concurrency, transaction throughput, and less resources used than common locking or optimistic protocols.
Surface topographies are often discussed as an important parameter influencing basic cell behavior. Whereas most in vitro studies deal with microstructures with sharp edges, smooth, curved microscale topographies might be more relevant concerning in-vivo situations. Addressing the lack of highly defined surfaces with varying curvature, we present a topography chip system with 3D curved features of varying spacing, curvature radii as well as varying overall dimensions of curved surfaces. The CurvChip is produced by low-cost photolithography with thermal reflow, subsequent (repetitive) PDMS molding and hot embossing. The platform facilitates the systematic in-vitro investigation of the impact of substrate curvature on cell types like epithelial, endothelial, smooth muscle cells, or stem cells. Such investigations will not only help to further understand the mechanism of curvature sensation but may also contribute to optimize cell-material interactions in the field of regenerative medicine.
In Neurofibromatosis 1 (NF1) germ line loss of function mutations result in reduction of cellular neurofibromin content (NF1+/−, NF1 haploinsufficiency). The Ras-GAP neurofibromin is a very large cytoplasmic protein (2818 AA, 319 kDa) involved in the RAS-MAPK pathway. Aside from regulation of proliferation, it is involved in mechanosensoric of cells. We investigated neurofibromin replacement in cultured human fibroblasts showing reduced amount of neurofibromin. Full length neurofibromin was produced recombinantly in insect cells and purified. Protein transduction into cultured fibroblasts was performed employing cell penetrating peptides along with photochemical internalization. This combination of transduction strategies ensures the intracellular uptake and the translocation to the cytoplasm of neurofibromin. The transduced neurofibromin is functional, indicated by functional rescue of reduced mechanosensoric blindness and reduced RasGAP activity in cultured fibroblasts of NF1 patients or normal fibroblasts treated by NF1 siRNA. Our study shows that recombinant neurofibromin is able to revert cellular effects of NF1 haploinsuffiency in vitro, indicating a use of protein transduction into cells as a potential treatment strategy for the monogenic disease NF1.
Age-dependent migratory behavior of human endothelial cells revealed by substrate microtopography
(2019)
Cell migration is part of many important in vivo biological processes and is influenced by chemical and physical factors such as substrate topography. Although the migratory behavior of different cell types on structured substrates has already been investigated, up to date it is largely unknown if specimen's age affects cell migration on structures. In this work, we investigated age-dependent migratory behavior of human endothelial cells from young (≤ 31 years old) and old (≥ 60 years old) donors on poly(dimethylsiloxane) microstructured substrates consisting of well-defined parallel grooves. We observed a decrease in cell migration velocity in all substrate conditions and in persistence length perpendicular to the grooves in cells from old donors. Nevertheless, in comparison to young cells, old cells exhibited a higher cell directionality along grooves of certain depths and a higher persistence time. We also found a systematic decrease of donor age dependent responses of cell protrusions in orientation, velocity and length, all of them decreased in old cells. These observations lead us to hypothesize a possible impairment of actin cytoskeleton network and affected actin polymerization and steering systems, caused by aging.
Um sich den neuen Herausforderungen zu stellen und eine wettbewerbsstarke Position im Zeitalter der Digitalisierung zu schaffen, wird vermehr in Digitalisierungsvorhaben investiert und digitale Geschäftsmodelle werden entwickelt. Was brauch ein mittelständisches Unternehemen, um sich erfolgreich in das digitale Zeitalter aufzumachen?
Sowohl die Zahl als auch die Relevanz gemeinnütziger Vereine in und für Deutschland ist immens. Gleichwohl erstaunt, dass die Rechnungslegung gemeinnütziger Vereine nur rudimentär geregelt ist und in der Forschungspraxis bisher eher wenig beleuchtet wird. Vor allem für die oftmals nur ehrenamtlich tätigen Vereinsvorstände stellt dies eine Herausforderung dar. Der vorliegende Beitrag schafft einen Überblick über die aktuelle Situtation der Vereinsrechnungslegung in Deutschland und erhebt im Rahmen einer empirischen Untersuchung die aktuellen Herausforderungen. Aus den Ergebnissen lassen sich wichtige Implikationen für die rechnungslegenden Vereine, die Adressaten dieser Rechnungslegung, den Gesetzgeber und die Prüfer der Berichte ableiten.
Rattern unerwünscht
(2018)
Die Additive Fertigung bietet großes Potenzial zur Erschließung neuer, flexibler und innovativer Fertigungsprozesse mit kurzen Durchlaufzeiten. Erhöhte Komplexität und die Integration von Funktionen in Bauteile wird gefördert. Zur Steigerung der Konkurrenzfähigkeit und weiteren Ausweitung des Einsatzgebietes sind automatisierte Fertigungsschritte nach dem Bauprozess erforderlich. Werkzeugmaschinen spielen auch in der Prozesskette der Additiven Fertigung eine zentrale Rolle bei der Erzeugung von genauen Funktionsflächen. Dabei ist evtl. eine andere Auslegung aufgrund reduzierter Zerspanvolumen und geringeren Flächen möglich.
Soft thermoplastic polysiloxane-urea-elastomers (PSUs) were prepared for the application as a biomaterial to replace the human natural lens after cataract surgery. PSUs were synthesized from amino-terminated polydimethylsiloxanes (PDMS), 4,4′-Methylenebis(cyclohexylisocyanate) (H12MDI) and 1,3–Bis(3-aminopropyl)-1,1,3,3–tetramethyldisiloxane (APTMDS) by a two-step polyaddition route. Such a material has to be highly transparent and must exhibit a low Young’s Modulus and excellent dimensional stability. Polydimethylsiloxanes in the range of 3000–33,000 g·mol−1 were therefore prepared by ring-chain-equilibration of octamethylcyclotetrasiloxane (D4) and APTMDS in order to study the influence of the soft segment molecular weight on the mechanical properties and the transparency of the PSU-elastomers. 2,4,6,8-Tetramethyl-2,4,6,8-tetraphenylcyclotetrasiloxane (D4Me,Ph) was co-polymerized with D4 in order to adjust the refractive index of the polydimethyl-methyl-phenyl-siloxane-copolymers to a value equivalent to a young human natural lens. Very elastic PSUs with Elongation at Break values higher than 700% were prepared. PSU-elastomers, synthesized from PDMS of molecular weights up to 18,000 g·mol−1, showed transmittance values of over 90% within the visible spectrum range. The soft segment refractive index was increased through the incorporation of 14 mol % of methyl-phenyl-siloxane from 1.4011 to 1.4346 (37 °C). Young’s Moduli of PSU-elastomers were around 1 MPa and lower at PDMS molecular weights up to 15,000 g·mol−1. 10-cycle hysteresis measurements were applied to evaluate the mechanical stability of the PSUs at repeated stress. Hysteresis values at 100% strain decreased from 32 to 2% (10th cycle) with increasing PDMS molecular weight. Furthermore, hysteresis at 5% strain was only detected in PSU-elastomers with low PDMS molecular weights. Finally, preliminary results of in vitro cytotoxicity tests on a PSU-elastomer showed no toxic effects on HaCaT-cells.
This article contains data on the synthesis and mechanical characterization of polysiloxane-based urea-elastomers (PSUs) and is related to the research article entitled “Influence of PDMS molecular weight on transparency and mechanical properties of soft polysiloxane-urea-elastomers for intraocular lens application” (Riehle et al., 2018) [1]. These elastomers were prepared by a two-step polyaddition using the aliphatic diisocyanate 4,4′-Methylenbis(cyclohexylisocyanate) (H12MDI), a siloxane-based chain extender 1,3-Bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane (APTMDS) and amino-terminated polydimethylsiloxanes (PDMS) or polydimethyl-methyl-phenyl-siloxane-copolymers (PDMS-Me,Ph), respectively. (More details about the synthesis procedure and the reaction scheme can be found in the related research article (Riehle et al., 2018) [1]).
Amino-terminated polydimethylsiloxanes with varying molecular weights and PDMS-Me,Ph-copolymers were prepared prior by a base-catalyzed ring-chain equilibration of a cyclic siloxane and the endblocker APTMDS. This DiB article contains a procedure for the synthesis of the base catalyst tetramethylammonium-3-aminopropyl-dimethylsilanolate and a generic synthesis procedure for the preparation of a PDMS having a targeted number average molecular weight of 3000 g mol−1. Molecular weights and the amount of methyl-phenyl-siloxane within the polysiloxane-copolymers were determined by 1H NMR and 29Si NMR spectroscopy. The corresponding NMR spectra and data are described in this article.
Additionally, this DiB article contains processed data on in line and off line FTIR-ATR spectroscopy, which was used to follow the reaction progress of the polyaddition by showing the conversion of the diisocyanate. All relevant IR band assignments of a polydimethylsiloxane-urea spectrum are described in this article.
Finally, data on the tensile properties and the mechanical hysteresis-behaviour at 100% elongation of PDMS-based polyurea-elastomers are shown in dependence to the PDMS molecular weight.
Small Island Developing States (SIDS) face tension between economic growth and environmental impact. Tourism fuels growth, but the resulting solid waste and other pollutants threaten the SIDS’ natural beauty, quality of life for residents, attractiveness to tourists, and economic success. We assess the tension between tourism-driven economic growth and environmental degradation from a limits-to-growth perspective, developing a generic system dynamics model of the problem using 38 years of data from the Maldives to estimate parameters and Monte-Carlo methods to assess the sensitivity of results to uncertainty. We contrast development paths for the next three decades under three sets of policies focusing on promoting growth, managing tourism demand–supply balance, and improving waste management. Findings are counterintuitive; policies focused on better waste management alone are self defeating, because they increase tourism, growth and waste generation, undermining attractiveness and growth later. Policies that limit tourism demand improve economic and environmental health.
Future intralogistics systems need to adapt flexibly to changing material flow requirements in line with future versatile factory environments, producing personalized products under the performance and cost conditions of today's mass production. Small batch sized down to a batch size of "1" lead to a high complexity in the design and economical manufacturing of these customized products. Intralogistics systems are integrated into higher-level areas (segment level) as well as into upsteam and downstream performance units (system-wide areas). This includes the logistic activities relevant for the system (organized according to storage, picking, transport) such as transportation or storage tasks of tools, semi-finished products, components, assemblies and containers, and waste. Today's centralized material flow control systems, which work based on predefined processes, are not capable and more specifically not suitable to deal with the arising complexity of changeable intralogistics systems. Autononomous, decentralized material flow control systems distribute the required decision-making and control processes on intelligent logistic entities. A major step for the development of an autonomous control method for hybrid intralogistics systems (manual, semi-automated and automated) is the development of a generic archetype for intralogistics systems regarding the system boundaries, elements and relations resulting in a descriptive model taking into account amongst others the time of demand, availability of resources, economic efficiency and technical performance parameters. The ESB Logistics Learning Factory at ESB Business School (Reutlingen University) serves for this as a close-to-reality development and validation environment.
Representing users within an immersive virtual environment is an essential functionality of a multi-person virtual reality system. Especially when communicative or collaborative tasks must be performed, there exist challenges about realistic embodying and integrating such avatar representations. A shared comprehension of local space and non-verbal communication (like gesture, posture or self-expressive cues) can support these tasks. In this paper, we introduce a novel approach to create realistic, video-texture based avatars of colocated users in real-time and integrate them in an immersive virtual environment. We show a straight forward and low-cost hard- and software solution to do so. We discuss technical design problems that arose during implementation and present a qualitative analysis on the usability of the concept from a user study, applying it to a training scenario in the automotive sector.
Virtual Reality (VR) technology has the potential to support knowledge communication in several sectors. Still, when educators make use of immersive VR technology in favor of presenting their knowledge, their audience within the same room may not be able to see them anymore due to wearing head-mounted displays (HMDs). In this paper, we propose the Avatar2Avatar system and design, which augments the visual aspect during such a knowledge presentation. Avatar2Avatar enables users to see both a realistic representation of their respective counterpart and the virtual environment at the same time. We point out several design aspects of such a system and address design challenges and possibilities that arose during implementation. We specifically explore opportunities of a system design for integrating 2D video-avatars in existing roomscale VR setups. An additional user study indicates a positive impact concerning spatial presence when using Avatar2Avatar.
In recent years, the numer of hybrid work systems using human robot collaboration (HRC) increased in industrial production environments - enhancing productivity while reducing work-related burden. Despite growing availability of HRC-suitable manipulation and safety technology, tools and techniques facilitating the design, planning and implementation process are still lacking. System engineers who strive to implement technically feasible, ergonomically meaningful and economically beneficial HRC application need to make design and technology decisions in various subject areas, whereas the design alternatives per morphological analysis is applied to establish a description model that can serve as both a supporting design guideline for future HRC application of value-adding, industrial quality as well as a tool to characterize and compare existing applications. It focuses on HRC within assembly processes, and illustrates the complexity of HRC applications in a comprehensible manner through its multi-dimensional structure. The morphology has been validated through its application on various existing industrial HRC applications, research demonstrators and interviews of experts from academia.
Polyelectrolyte multi-layer (PEM) coatings are prepared by alternative deposition of single polyelectrolyte monolayers on charged surfaces using the Layer-by-Layer (LbL) dip coating procedure. These are nanometre scaled coatings which allow fulfilling of different technical or biological requirements. The build-up process is based on selfassembly and self organization of polycations and polyanions on different substrates including complex geometrical structures and even closed volumes, forming homogeneous layer without defects. Depending on the proper selection of the applied polyelectrolytes, coatings with different stabilities can be prepared. Some of the coatings are stable and cannot be removed from the surface. Others are degradable and can be used as systems for controlled local drug delivery. Here we summarise the results of our experience in preparation of PEM coatings with different functionalities. PEM coatings can be used as controllable delivery system for siRNA polyplexes. They can be used to control the adhesion of different cell types on the surfaces and support e.g. the endothelialisation process on cardio-vascular medical devices as e.g. stents or reduce the immunological response of the tissue after implantation. We summarise results from physical characterisation of the coatings (e.g. film thickness, roughness, electrical charge and hydrophilicity) combined with in-vitro biological studies on adhesion of HUVEC cells.
Polyelectrolyte multilayer (PEM) are thin polymeric films produced by alternating adsorption of positively and negatively charged polyelectrolytes (PE) on a substrate. These films are considered drug delivery agents as well as coating material for implants, due to their antibiofouling and biologically benign properties. For these reasons the film mechanical properties as well as response to mechanical stress are important measurement parameters. Especially intriguing is the correlation of the mechanical properties of PEM on macroscopic level with the structure of PEM on molecular level, which is addressed here for the first time. This study investigates PEM from PDADMA/PSS produced by spraying technique with neutron and X-ray reflectometry. Reflectometry technique provides precise information on thickness and density (i.e., electron density or scattering length density, respectively), and, this way, allows to conclude on changes in film composition. Thus, neutron and X-ray reflectometry technique is suitable to investigate the overall and the internal transformations, which PEM films might undergo upon exposure to mechanical load. During uniaxial elongation two regimes of PEM deformation can be observed: An elastic regime at small elongations (below ca. 0.2%), which is characterized by a reversible change of film thickness, and a plastic regime with a permanent change above this limit. Both regimes have in common, that the mechanical load induces an increase of the film thickness, which is accompanied by an uptake of water from the surrounding atmosphere. The strain causes a molecular rearrangement within the PEM-structure of stratified layers, which, even in elastic regime, is permanent, although the thickness change remains reversible.
This paper presents a digitally controlled boost converter IC for high output voltage and fast transient applications. Thus, it is well applicable in automotive and industrial environments. The 3V-to-6V input voltage, 6.3V output voltage, 1A boost converter IC is fabricated in a 180nm BCD technology. Digital control enables cost savings, advanced control concepts, and it is less parameter sensitive compared to common analog control. A 90 ns latency, 6-bit delay line ADC operates with a window concept, meeting high resolution requirements, e.g. in car battery applications. An output voltage live tracking is included for extending the ADC conversion window. A charge pump DAC provides high resolution, monotonicity, and short 128 ns conversion time. Further, a standard digital PI controller is enhanced by a simple but effective ΔV/Δt-intervention control. It results in 2.8x reduced output voltage deviations in case of load steps, scaling down the output capacitor value by the same factor.
Boost converters suffer from a bandwidth limitation caused by the right-half plane zero (RHPZ), which occurs in the control-to-output transfer function. In contrast, there are many applications that require superior dynamic behavior. Further, size and cost of boost converter systems can be minimized by reduced voltage deviations and fast transient responses in case of large signal load transients. The key idea of the proposed ΔV/Δt-intervention control concept is to adapt the controller output to its new steady state value immediately after a load transient by prediction from known parameters. The concept is implemented in a digital control circuit, consisting of an ASIC in a 110 nm-technology and a Xilinx Spartan-6 field programmable gate array (FPGA). In a boost converter with 3.5V input voltage, 6.3V output voltage, 1.2A load, and 500 kHz switching frequency, the output voltage deviations are 2.8x smaller, scaling down the output capacitor value by the same factor. The recovery times are 2.4x shorter in case of large signal load transients with the proposed concept. The control is widely applicable, as it supports constant switching frequencies and allows for duty cycle and inductor current limitations. It also shows various advantages compared to conventional control and to selected adaptive control concepts.
Die Lage der öffentlichen Haushalte ist aufgrund der Finanz- und Wirtschaftskrise seit geraumer Zeit angespannt. Bereits während des Bundestagswahlkampfs sowie nach dem Wahlsieg der christlich-liberalen Koalition im Jahr 2009 gab es eine hitzige Debatte über die Vereinbarkeit von Steuersenkungen und nachhaltigen öffentlichen Finanzen. Im vorliegenden Beitrag wird die Frage der Finanzierbarkeit von Steuererleichterungen durch zukünftiges Wirtschaftswachstum diskutiert. Auf Basis aktueller Daten und modelltheoretischer Simulationsberechnungen wird ein wirtschaftspolitisch gangbarer Weg zur Umsetzung des Koalitionsvertrages aufgezeigt.
Sowohl das Erstellen als auch das Lesen von Berichten gilt als Pflichtübung, die wenig produktiv und selten spannend ist - zu Unrecht, wie dieses Buch zeigen will. Internes Berichtswesen (Management Reporting) ist nichts weniger als ein zentrales Element des Informationsmanagements und damit ein wesentlicher Erfolgsfaktor für jedes Unternehmen. Das Buch schließt eine Lücke, indem es das interne Berichtswesen von seinem Ruf als "theoriefreies Praktikerthema" befreit und für alle behandelten Themen fundierte, aber auch für Leser ohne Vorkenntnisse verständliche Theoriebezüge herstellt (Informationstheorie, Behavioural Accounting, Internationales ReWe etc). Alle Inhalte werden in vier verschiedene (und gekennzeichnete) Kategorien eingeteilt, welche einen individuellen "Lesepfad" durch das Buch ermöglichen.
Wirtschaft, Gesellschaft und Finanzwelt entwickeln sich dynamisch und unterliegen heute - dies ist schon fast eine Binsenweisheit - einem beschleunigten Wandel. Dennoch basieren die gängigen Managementmethoden für Führungskräfte noch immer auf der Annahme optimaler, stabil-berechenbarer Rahmenbedingungen. Die Autoren gehen jedoch davon aus, dass angesichts sprunghafter Veränderungen der Unternehmensumwelt schnelle und flexible Reaktionen mit einfachen Methoden wichtiger sind als die zeit- und kostenaufwendige Suche nach optimalen Lösungen. Um dennoch gute Ergebnisse zu erreichen, müssen in der betrieblichen Praxis Methoden zum Einsatz kommen, die das Erfahrungswissen und die Intuition einer Gruppe von Kollegen stärker als bisher nutzen - es bedarf eines robusten Managements.
This paper presents a wide-Vin step-down parallel-resonant converter (PRC), comprising an integrated 5-bit capacitor array and a 300-nH resonant coil, placed in parallel to a conventional buck converter. Soft-switching resonant converters are beneficial for high-Vin multi-MHz converters to reduce dominant switching losses, enabling higher switching frequencies. The output filter inductor is optimized based on an empirical study of available inductors. The study shows that faster switching significantly reduces not only the inductor value but also volume, price, and even the inductor losses. In addition, unlike conventional resonant concepts, soft-switching control as part of the proposed PRC eliminates input voltage-dependent losses over a wide operating range, resulting in 76.3% peak efficiency. At Vin = 48 V, a loss reduction of 35% is achieved compared with the conventional buck converter. Adjusting an integrated capacitor array, and selecting the number of oscillation periods, keeps the switching frequency within a narrow range. This ensures high efficiency across a wide range of Vin = 12–48 V, 100–500-mA load, and 5-V output at up to 25-MHz switching frequency. Thanks to the low output current ripple, the output capacitor can be as small
as 50 nF.
This paper presents a dc–dc converter for integration in the power management unit of an ultra-low power microcontroller. The converter is designed to significantly reduce the wake-up energy and startup delay of the supplied core. The use of a minimized output capacitor is the key factor to save the wake-up energy. The converter is buffered with only 56 nF and guarantees a stable output of 1.2 V with a voltage ripple smaller than 30 mV. The controller of the proposed dc–dc converter is based on a predictive peak current control that allows the system to control the energy transfer at extremely low power consumption. The proposed circuit is implemented in 130 nm CMOS technology with an area of only 0.14 mm². It achieves a high conversion efficiency of 92.1% and a small quiescent current of 440 nA. It operates from 1.8 to 3.3 V with a maximum load of 2.65 mA.
Der spartenübergreifende BDI-Arbeitskreis Internet der Energie hat voraussichtliche Veränderungen durch Künstliche Intelligenz (KI) auf die Bereiche Energie und Klima analysiert und den möglichen Beitrag von KI zur Lösung anstehender Herausforderungen in diesen Bereichen erörtert. KI kann einen wesentlichen Beitrag zum Gelingen der Energiewende in Deutschland leisten. Der Energiesektor ist ein zentraler Bestandteil der deutschen Wirtschaft und daher auch in diesem Kontext äußerst relevant.
Rattern nicht erwünscht
(2018)
Este trabajo se enmarca dentro del vasto contexto de Ciudades Inteligentes, y se centra en el área de la conducción inteligente de vehículos, tanto en zonas urbanas como interurbanas, mediante la recogida de datos en tiempo real, medidos con sensores, por parte de los propios conductores, así como de datos capturados mediante simulación.
El objetivo de este trabajo es doble. Por un lado, el estudio y aplicación de las diferentes técnicas y métodos de detección de valores atípicos en bases de datos multivariantes, además de una comparativa entre ellos mediante las pruebas llevadas a cabo con datos de tráfico real. Y por otro lado, establecer una relación entre las situaciones anómalas de tráfico, como puedan ser atascos o accidentes, con los valores atípicos multivariantes encontrados.
La detección de valores atípicos representa una de las tareas más importantes a la hora de realizar cualquier análisis de datos, sea cual sea el dominio o área de estudio, ya que entre sus funciones primordiales se encuentra el descubrir información útil, que resulta de gran valor, y que por lo general queda oculta por la alta dimensión de los datos.
Con el uso de mecanismos de detección de valores atípicos junto con métodos de clasificación supervisada, se va a poder llevar a cabo el reconocimiento de elementos de la infraestructura vial urbana como pueden ser rotondas, pasos de cebra, cruces o semáforos.
Im Vergleich zum digitalen Layoutentwurf weist der analoge Layoutentwurf einen wesentlich geringeren Automatisierungsgrad auf. Dies gilt insbesondere für den Layoutentwurf von Hochfrequenzschaltungen, wo Einflüsse der lokalen Layoutumgebung besonders zu berücksichtigen sind. Bei dieser sog. Kontextabhängigkeit geraten sowohl Optimierungsalgorithmen als auch herkömmliche Generatoransätze schnell an Grenzen. In dieser Arbeit wird eine funktionale Erweiterung des bekannten Generatorprinzips eingesetzt, die es erlaubt, Informationen aus der Layoutumgebung der Instanz in die Layoutgenerierung einzubeziehen. Mit dieser sog. kontextbasierten PCell gelingt die Automatisierung konkreter, bisher nur manuell lösbarer Probleme des Layoutentwurfs von Hochfrequenzschaltungen. Die Arbeit zeigt das Potential kontextbasierter PCells für die weitere Steigerung des Automatisierungsgrades im analogen Layoutentwurf.
Revenue management information systems are very important in the hospitality sector. Revenue decisions can be better prepared based on different information from different information systems and decision strategies. There is a lack of research about the usage of such systems in small and medium-sized hotels and architectural configurations. Our paper empirically shows the current development of revenue information systems. Furthermore, we define future developments and requirements to improve such systems and the architectural base.
Enterprises are presently transforming their strategy, culture, processes, and their information systems to become more digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT systems with many rather small and distributed structures, like Internet of Things or mobile systems. Since years a lot of new business opportunities appeared using the potential of the Internet and related digital technologies, like Internet of Things, services computing, cloud computing, big data with analytics, mobile systems, collaboration networks, and cyber physical systems. This has a strong impact for architecting digital services and products. The change from a closed-world modeling perspective to more flexible open-world composition and evolution of system architectures defines the moving context for adaptable systems, which are essential to enable the digital transformation. In this paper, we are focusing on a decision-oriented architectural composition approach to support the transformation for digital services and products.
Auch das Liquiditäts- und Working Capital Management unterliegt einem ständigen Wandel. So hatte die Liquiditätssicherung nach Ausbruch der Finanzkrise 2008/09 in vielen Unternehmen höchste Priorität. In Zeiten niedriger Zinsen können die Kapitalkosten vernachlässigt werden, wodurch die Notwendigkeit sinkt, Bestände des Working Capital zu reduzieren. Bei steigenden Zinsen und/oder einer schwachen konjunkturellen Entwicklung verschärft sich dagegen der Zielkonflikt zwischen Sicherheit und Rentabilität.
Mögliche Verbesserungen ergeben sich beim Liquiditäts- und Working Capital Management durch die Digitalisierung, die den Informationsaustausch zwischen dem Unternehmen und seinemn Supply-Chain-Partnern beschleunigt. Damit lässt sich an vielen Stellen des Wertschöpfungsprozesses die Effizienz steigern.
Das forschungsgetriebene Lehrformat "Projektorientiertes Lernen" wird im Masterprogramm der Fakultät Angewandte Chemie der Hochschule Reutlingen von uns seit nunmehr einer Dekade eingesetzt und stetig weiter entwickelt. Dieses Format hat sich besonders bewährt, um methodische und fachliche Kompetenzen nachhaltig zu vermitteln. Es war uns ein Anliegen, auch anderen an der praxisorientierten Ausgestaltung der Lehre Interessierten unsere Erfahrungen mitzuteilen und unsere Vorgehensweise konkret vorzustellen. Dazu haben wir unsere bisher verwendeten Dokumente und Veröffentlichungen zu diesem Thema redigiert und stellen sie in dem vorliegenden Buch vor. In diesem von uns als "Kurshandbuch" für Anwender gedachten Werk finden sich unsere über Jahre gesammelten Erfahrungen mit der Organisation eines solchen Lehr- und Lernformats.
Digitization is the use of digital technologies for creating innovative digital business models and transforming existing business models, processes and systems. Digitization creates profound changes in the economy and society. Information is often captured and processed without human intervention using digital means. Digitization impacts nearly all products and services as well as the customer and the value-creation perspective.
A procedural approach to automate the manual design process in analog integrated circuit design
(2018)
This paper presents a novel approach to automating the design of analog integrated circuits: (1) the Expert Design Plan (EDP), a procedural generator, and (2) the EDP Language, a high-level description language for writing an EDP. An EDP is a parameterizable, executable script, which reproduces a designer’s course of action when designing a circuit. Thus, an EDP formalizes the design expert’s knowledge-based strategy and makes it reusable. Since it is essential that an EDP represents a circuit designers’ way of thinking and working as close as possible, the designers themselves should be enabled to create the EDP. Therefore, our approach provides a input method through a domain-specific language called EDP Language (EDPL). Using this language is intuitive and requires no special training. In an exemplary implementation of our approach, a common-source amplifier is automatically sized using a set of only 10 instructions. Even in the first usage our EDP approach has appeared to be more efficient than the manual sizing process.
Creating new business models, products or services is challenging in fast changing unpredictable environments. Often, product teams need to make many assumptions (e.g., assumptions about future demands) that might not be true. These assumptions impose risks to the success and these risks need to be mitigated early. One of the principles of the Lean Startup approach is to identify and prioritize the riskiest assumptions in order to validate them as early as possible. This helps to avoid wasting effort and time. In the literature there are several different methods for identifying and prioritizing the riskiest assumptions reported. However, only little research exists about the practical application of these methods in practice and how to teach them. In this paper, we present and empirically analyze a workshop format that we have developed for teaching the prioritization of Lean Startup assumptions. We aim at raising the awareness for assumption thinking among the participants and teach them through group work how to prioritize assumptions. The results of the analysis of a multitude of conducted workshops show that the applied method did lead to reasonable results and accompanying learning effects. In addition, the participants got aware of assumption thinking and liked learning in a practical way.
Objective: This paper aims at getting an understanding of current problems and challenges with roadmapping processes in companies that are facing volatile markets with innovative products. It also aims at gathering ideas and attempts on how to react to those challenges.
Method: As an initial step towards the objectice a semi-structured expert interview study with a case company in the Smart Home domain was conducted. Four employees from the case company with different roles around product roadmaps have been interviewed and a content analysis of the data has been performed.
Results: The study shows a significant consensus among the interviewees about several major challenges and the necessity to change the traditional roadmapping process and format. The interviewees stated that based on their experience traditional feature-based product roadmaps are increasingly losing their benefits (such as good planning certainty) in volatile environments. Furthermore, the ability to understand customer needs and behaviors has become highly important for creating and adjusting product roadmaps. The interviewees see the need for both, sufficiently stable goals on the roadmap and flexibility with respect to products or features to be developed. To reach this target the interviewees proposed to create roadmaps based on outcome goals instead of product features. In addition, it was proposed to decrease the level of detail of the roadmaps and to emphasize the long-term view. Decisions about which feature to develop should be open as long as possible. Expected benefits of such a new way of product roadmapping are higher user centricity, a stable overall direction, more flexibility with respect to development decisions, and less breaking of commitments.
Sleep study can be used for detection of sleep quality and in general bed behaviors. These results can helpful for regulating sleep and recognizing different sleeping disorders of human. In comparison to the leading standard measuring system, which is Polysomnography (PSG), the system proposed in this work is a non-invasive sleep monitoring device. For continuous analysis or home use, the PSG or wearable Actigraphy devices tends to be uncomfortable. Besides, these methods not only decrease practicality due to the process of having to put them on, but they are also very expensive. The system proposed in this paper classifies respiration and body movement with only one type of sensor and also in a noninvasive way. The sensor used is a pressure sensor. This sensor is low cost and can be used for commercial proposes. The system was tested by carrying out an experiment that recorded the sleep process of a subject. These recordings showed excellent results in the classification of breathing rate and body movements.
Many start-ups are in search of cooperation partners to develop their innovative business models. In response, incumbent firms are introducing increasingly more cooperation systems to engage with start-ups. However, many of these cooperations end in failure. Although qualitative studies on cooperation models have tried to improve the effectiveness of incumbent start-up strategies, only a few have empirically examined start-up cooperation behavior. Considering the lack of adequate measurement models in current research, this paper focuses on developing a multi-item scale on cooperation behavior of start-ups, drawing from a series of qualitative and quantitative studies. The resultant scale contributes to recent research on start-up cooperation and provides a framework to add an empirical perspective to current research.
Information technology (IT) plays an essential role in organizational innovation adoption. As such, IT governance (ITG) is paramount in accompanying IT to allow innovation. However, the traditional concept of ITG to control the formulation and implementation of IT strategy is not fully equipped to deal with the current changes occurring in the digital age. Today’s ITG needs an agile approach that can respond to changing dynamics. Consequently, companies are relying heavily on agile strategies to secure better company performance. This paper aims to clarify how organizations can implement agile ITG. To do so, this study conducted 56 qualitative interviews with professionals from the banking industry to identify agile dimensions within the governance construct. The qualitative evaluation uncovered 46 agile governance dimensions. Moreover, these dimensions were rated by 29 experts to identify the most effective ones. This led to the identification of six structure elements, eight processes, and eight relational mechanisms.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable System of a self-sufficient Enterprise to a relatively fluid, open, agile and transformational system of networked co-adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings)
to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions in terms of structures, processes and relational mechanisms were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG in the German-speaking banking industry.
Die für Deutschland verfügbaren Studien zur Digitalen Transformation in klein- und mittelständischen Unternehmen (KMU) sind sich weitgehend einig. KMU tun sich mit dem Thema Digitalisierung schwer. Der vorliegende Beitrag diskutiert, weshalb KMU an der Digitalen Transformation scheitern und was dagegen getan werden kann.
Digital transformation has changed corporate reality and, with that, firms’ IT environments and IT governance (ITG). As such, the perspective of ITG has shifted from the design of a relatively stable, closed and controllable system of a self-sufficient enterprise to a relatively fluid, open, agile and transformational system of networked co adaptive entities. Related to this paradigm shift in ITG, this paper aims to clarify how the concept of an effective ITG framework has changed in terms of the demand for agility in organizations. Thus, this study conducted 33 qualitative interviews with executives and senior managers from the banking industry in Germany, Switzerland and Austria. Analysis of the interviews focused on the formation of categories and the assignment of individual text parts (codings) to these categories to allow for a quantitative evaluation of the codings per category. Regarding traditional and agile ITG dimensions, 22 traditional and 25 agile dimensions were identified. Moreover, agile strategies within the agile ITG construct and ten ITG patterns were identified from the interview data. The data show relevant perspectives on the implementation of traditional and new ITG dimensions and highlight ambidextrous aspects in ITG frameworks.
Die Digitalisierung im Einkauf findet als schleichender Prozess statt, wird allerdings vom Vertrieb nur ungenügend wahrgenommen und genutzt. In Anbetracht der bereits hohen, weiter wachsenden Quote eingekaufter Waren und Leistungen an den Umsatzkosten ein kritischer Befund. Fehlinterpretationen der Anforderungen sind die Folge. Wie kann man hier Abhilfe schaffen? Eine Analyse der Entwicklungen im Einkauf zeigt Handlungsempfehlungen für den Vertrieb auf und fordert eine schnelle Reaktion.
Der souveräne Umgang mit der SPSS Syntax bietet einen unschätzbaren Vorteil für die tägliche Arbeit von Anwendern, die mit der Analyse von Daten zu tun haben. Das Buch ist eine integrierte Einführung in die Steuersprache von IBM SPSS Statistics für Studenten, Forscher und Praktiker. Es behandelt neben den notwendigen Grundlagen die Themengebiete Datenaufbereitung, Datentransformation und -modifikation. Weitere Themengebiete umfassen die Makro- und Matrixsprache, die in der 2. Auflage deutlich erweitert worden sind.
Die Steigerung der Energieeffizienz ist eine gesellschaftliche Notwendigkeit und bildet neben dem Umstieg auf erneuerbare Energien den entscheidenden Hebel zur Realisierung der Energiewende und Minderung der CO2-Emissionen in Deutschland. Kleine und mittlere Unternehmen (KMU) nehmen in diesem Zusammenhang eine besondere Stellung ein: Aktuelle Studien deuten auf geringere Steigerungsraten der Energieeffizienz gegenüber Großunternehmen hin, die zumeist mit unterschiedlichen materiellen und personalen Voraussetzungen erklärt werden.
Das Forschungsprojekt "Entscheidungen für Energieeffizienz" widmete sich vor diesem Hintergrund der Situation produzierender KMU in Baden-Württemberg. Mit dem Ziel, ein verbessertes Verständnis über die Energieeffizienz-Entscheidungen der KMU zu gewinnen, wurde der Frage nachgegangen, wie der Umgang mit Energie in der täglichen Praxis in KMU organisiert wird, wie über Energieeffizienz entschieden wird und welche Treiber und Hemmnisse sich dabei ergeben.
Zur Beantwortung der Fragen wurde ein Ansatz verfolgt, der kulturelle Einflüsse mitberücksichtigt. Forschungsstrategisch kam ein Mixed-Methods-Ansatz zur Anwendung, der durch die Kombination von qualitativen Daten (Einzelfallstudien) und quantitativen Daten (Fragebogenerhebung) methodisch umgesetzt wurde.
Durch die Differenzierung der Produkte nach verschiedenen Kundengruppen konnte das Unternehmen seinen Marktanteil trotz des gesättigten Markts ausbauen. Neben der erstklassigen Qualtät seiner Produkte unterscheidet das Unternehmen sich nun auch noch durch seine kundengruppenspezifische Entwicklung und Vermarktung von der No-Name-Konkurrenz und den Herstellern aus Niedriglohnländern. Diese Sicherung der Marktposition wiegt die Kosten der notwendigen Flexibilisierung mehr als auf. Das Unternehmen ist durch seine neuen und innovativen Produkte besser für die Zukunft gerüstet. Es kann durch seine hervorragenden Kontakte zu seinen Kunden auf die sich ändernden Wünsche und Anforderungen seiner vielfältigen Kundschaft schnell und gezielt reagieren.
Der vorliegende Beitrag zeigte die Anwendung eines Extended Kalman Filters für die Beurteilung des Verschleißzustandes von Rollenketten. Anders als in den üblicherweise eingesetzten signalbasierten Verfahren wurde damit ein modellbasierter Ansatz gewählt. Der Einsatz des Extended Kalman Filters ermöglicht die Schätzung von Parametern eines reduzierten Kettenmodells, das die Dynamik der einzigen Messgröße, nämlich des Drehmoments des antreibenden Motors näherungsweise nachbildet. Im Beitrag wurde dieses Verfahren auf Messdaten aus vier Dauerversuchen an Rollenketten eingesetzt und gezeigt, dass mit steigendem Verschleiß eine Änderung ausgewählter Modellparameter erfolgt.
Diese Vorgehensweise ist ein erster Ansatz, der durch weitere Forschungsarbeiten noch verbessert werden muss. In zukünftigen Forschungsarbeiten wird zusätzlich zur Parameterschätzung eine Prädiktion durchgeführt, um einen Schätzwert für die Restlebensdauer zu erhalten. Hierzu gibt es Ansätze in der Literatur, die auf das konkrete Problem angepasst werden müssen. Zudem muss die Modellierungssystematik so erweitert werden, dass Wissen über das Prozessverhalten in die Modellierung mit eingebracht wird, um die Aussagekraft der Ergebnisse sowie die Robustheit des Verfahrens bezüglich Betriebsparametern, Umgebungsbedingungen und Exemplarstreuungen zu verbessern.
In order to be innovative, an organisation has to utilise the skills of all its employees. Implementing the potential of women, older staff members as well as people with different backgrounds leads to more creative ideas, new approaches and results in more innovative products. But how can a company use the innovative potential of its diverse workforce? And how can customer diversity be used to create innovations?
This book answers these questions as well as many more related to the topic of diversity management and innovation. Special emphasis is put on the role of women in the innovation system. Therefore, the language and effects of pictures used in job advertisements are addressed. Moreover, measures to advocate highly innovative women are identified including their demands regarding workplace requirements.
In addition, the book deals with diversity management in both publicly traded companies and public institutions. The involvement of children as Lead Users along the product development process is addressed as well. Given the fact that innovation does not only comprise products, but also services, a separate chapter focusing on the effect of Diversity on service innovations is included.
Sole value – the sneaker resale market :
an explorative analysis of the sneaker resale market
(2018)
The purpose of this explorative research paper is to examine the sneaker resale market and its typical processes in order to give a comprehensive overview over the secondary market for limited edition sneakers. Hypotheses are presented that will be analysed with the empirical research methods of expert interviews and sales data analysis. Amongst other findings, this paper shows that there is a complementary relationship between sneaker brands and the resale market; that product limitation is essential for value increases; that collaborations are necessary for sneaker brands to be relevant on the resale market and that the market is very fragmented. All combined circumstances described in this paper explain the sneaker resale market and its processes. Additionally, some outlooks on the future will be given with the help of expert interviewees and current developments on the market will be discussed.
Customer relationship management (CRM) is one of the most frequently adopted management tools and has received much attention in the literature. From a company-wide perspective, CRM is viewed as a complex process requiring interventions in different company areas. Previous research has already highlighted the pitfalls and failures related to a partial and incomplete view of CRM. This study advances research on CRM by investigating the impact of the relative implementation time according to which interventions are implemented in different areas (customer management, CRM technology, organizational alignment, and CRM strategy) on CRM performance. The results of the empirical study reveal that compared to other critical CRM activities, a later implementation of organizational alignment activities has a negative impact on performance. Further, our results show that CRM implementations do not equally address the areas of customer acquisition, growth, and loyalty, since this clearly depends on company objectives and also on geographical differences.
Drei Stufen geben Sicherheit
(2018)
GaN-Transistoren bieten ein enormes Potenzial für kompakte Leistungselektronik, indem sie die Größe von passiven Bauelementen verringern. Allerdings bringt das schnelle Schalten Herausforderungen für den Gate-Treiber mit sich. Ein vollständig integrierter Treiber mit drei Spannungsstufen hilft, diese zu lösen.
The level shifter and the floating gate supply for high-side transistors are a major challenge in high-voltage DCDC converters. This paper presents a high speed and power-efficient level shifter for voltages of up to 50V, suitable for both PMOS and NMOS power FETs. A switching node falling edge detection allows both, a sensitive and safe signal detection. This enables a robust operation during steep dv / dt transitions and a power consumption as low as 4.1 pJ per switching cycle, which is a reduction of more than 40% compared to prior art. An active clamping circuit prevents common mode displacement currents into the high-side supply. The level shifter is implemented in a 180nm BiCMOS technology. Measurements confirm a 50V 120MHz high-speed operation of the level shifter with a rising / falling propagation delay of 1.45 ns / 1.3 ns, respectively. The dv / dt robustness has been confirmed by measurements for transitions up to 6V/ ns.
A wide-bandwidth galvanically isolated current sensing circuit with an integrated Rogowski coil in 180nm CMOS is presented. Exploiting the high-frequency properties of an optimized on-chip Rogowski coil, currents can be measured up to a bandwidth of 75 MHz. The analog sensor front-end comprises a two-stage integrator, which allows a chopper frequency below signal bandwidth, resulting in 2.2 mVrms output noise. An additional integrated Hall sensor extends the measurement range towards DC.
Due to their superior fast-switching performance, GaN transistors show enormous potential to enable compact power electronics in applications like renewable energy, electrical cars and home appliances by shrinking down the size of passives. However, fast switching poses challenges for the gate driver. Since GaN transistors have a low threshold voltage Vt of ~1V, an unintended driver turn-on can occur in case of a unipolar gate control as shown for a typical half-bridge in Fig. 24.2.1 (top left). This is due to coupling via the gate-drain capacitance (Miller coupling), when the low-side driver turns on, causing a peak current into the gate. This is usually tackled by applying a negative gate voltage to enhance the safety margin towards Vt, resulting in a bipolar gate-driving scheme. In many power-electronics applications GaN transistors operate in reverse conduction, carrying the inductor current during the dead time t, when the high-side and low-side switch are off (as illustrated at a high-side switch in Fig. 24.2.1, bottom left). As there is no real body diode as in silicon devices, the GaN transistor turns on in reverse operation with a voltage drop VF across the drain-source terminals (quasi-body diode behavior). As a negative gate voltage adds to VF, 63% higher reverse-conduction losses were measured for a typical GaN switch in bipolar gate-drive operation. This drawback is addressed by a three-level gate voltage (positive, 0V, negative), which at the same time provides robustness against unintended turn-on similar to the bipolar gate driver, proven in [1] for a discrete driver.
This paper presents a fully integrated gate driver in a 180-nm bipolar CMOS DMOS (BCD) technology with 1.5-A max. gate current, suitable for normally OFF gallium nitride (GaN) power switches, including gate-injection transistors (GIT). Full-bridge driver architecture provides a bipolar and three-level gate drive voltage for a robust and efficient GaN switching. The concept of high voltage energy storing (HVES), which comprises an on-chip resonant LC tank, enables a very area-efficient buffer capacitor integration and superior gatedriving speed. It reduces the component count and the influence of parasitic gate-loop inductance. Theory and calculations confirm the benefits of HVES compared to other capacitor implementation methods. The proposed gate driver delivers a gate charge of up to 11.6 nC, sufficient to drive most types of currently available GaN power transistors. Consequently, HVES enables to utilize the fast switching capabilities of GaN for advanced and compact power electronics.
In current times, a lot of new business opportunities appeared using the potential of the Internet and related digital technologies, like Internet of Things, services computing, cloud computing, big data with analytics, mobile systems, collaboration networks, and cyber physical systems. Enterprises are presently transforming their strategy, culture, processes, and their information systems to become more digital. The digital transformation deeply disrupts existing enterprises and economies. Digitization fosters the development of IT environments with many rather small and distributed structures, like Internet of Things. This has a strong impact for architecting digital services and products. The change from a closed-world modeling perspective to more flexible open-world and living software and system architectures defines the moving context for adaptable and evolutionary software approaches, which are essential to enable the digital transformation. In this paper, we are putting a spotlight to service oriented software evolution to support the digital transformation with micro granular digital architectures for digital services and products.
While there are several theoretical comparisons of Object Orientation (OO) and Service Orientation (SO), little empirical research on the maintainability of the two paradigms exists. To provide support for a generalizable comparison, we conducted a study with four related parts. Two functionally equivalent systems (one OO and one SO version) were analyzed with coupling and cohesion metrics as well as via a controlled experiment, where participants had to extend the systems. We also conducted a survey with 32 software professionals and interviewed 8 industry experts on the topic. Results indicate that the SO version of our system possesses a higher degree of cohesion, a lower degree of coupling, and could be extended faster. Survey and interview results suggest that industry sees systems built with SO as more loosely coupled, modifiable, and reusable. OO systems, however, were described as less complex and easier to test.
While the recently emerged microservices architectural style is widely discussed in literature, it is difficult to find clear guidance on the process of refactoring legacy applications. The importance of the topic is underpinned by high costs and effort of a refactoring process which has several other implications, e.g. overall processes (DevOps) and team structure. Software architects facing this challenge are in need of selecting an appropriate strategy and refactoring technique. One of the most discussed aspects in this context is finding the right service granularity to fully leverage the advantages of a microservices architecture. This study first discusses the notion of architectural refactoring and subsequently compares 10 existing refactoring approaches recently proposed in academic literature. The approaches are classified by the underlying decomposition technique and visually presented in the form of a decision guide for quick reference. The review yielded a variety of strategies to break down a monolithic application into independent services. With one exception, most approaches are only applicable under certain conditions. Further concerns are the significant amount of input data some approaches require as well as limited or prototypical tool support.
Based on a survey among customers of seven German municipal utilities, we estimate hierarchical multiple regression models to identify consumer motivations for participating in P2P electricity trading and develop implications for marketing strategies for this currently relatively unknown product. Our results show a low importance of socio-demographics in explaining differences between consumer groups, but high influence of attitudes, knowledge and likelihood to purchase related products. The most valuable target groups for P2P electricity trading marketing strategies of municipal utilities first and foremost should aim at are innovators, especially prosumers. They are well-informed about and open minded concerning electricity sharing and highly environmentally aware. They ask for transparency and are willing to purchase related products. They are attracted by the ability to share generation and consumption and to a lesser extent by economic reasons. Our results indicate that the marketing efforts should to a special degree take peer effects into account, as they are found to wield great influence on general openness towards and purchase intention for P2P electricity products. Finally, municipal utilities should build on the high level of satisfaction and trust of consumers and use P2P electricity trading as measure to keep and win customers willing to change their supplier.
The sound of brands
(2019)
The aim of this research paper is to both examine and conceptualise the concept of audio branding. Audio branding is an important part of the overall brand management concept and corporate identity. Strong brands ease the choice for customers and convey values and a certain quality promise. Branding is of vital importance. It needs to be acknowledged that only 0.004% of all outer stimuli reach the human consciousness. Therefore, audio branding is a way to further strengthen the overall brand awareness. This leads to an emotional connection with a brand.
This study strives to determine the characteristics of audio branding and to analyse the corporate audio branding of Audi. The result of this research study is the suggestion of the use of audio branding in a way that fits the overall brand picture. Otherwise, the brand communication is inconsistent, and this could lead to a misunderstanding of the brand values for customers. The analysis of the Audi corporate sound design might be beneficial for practitioners. The overall evaluation of the concept of audio branding contributes to the existing body of literature in branding.
The promise of immutable documents to make it easier and less expensive for consumers and producers to collaborate in a verifiable way would represent an enormous progress, especially as companies strive for establish service contracts which are based on the flow of many small transactions using machine-to-machine communication. The blockchain technology logs these data, verifies the authenticity and make them available for service offers. This work deals with an architecture enabling to setup order processing between consumers and produceers using blockchain. In this way, the technical feasibility is shown and the special characteristics of blockchain production networks will be discussed.
Im Anschluss an eine theoretisch fundierte und zugleich praxisnahe und umfassende Darstellung des gesamten Event-Marketing und -Management untersucht Gerd Nufer die bislang noch wenig erforschte Wirkungsweise des innovativen Kommunikationsinstruments und geht dabei vertiefend auf das Zustandekommen eines Imagetransfers von einem Event auf eine Marke bzw. ein Unternehmen ein. Abschließend werden dauerhafte Markenerlebniswelten als aktuelle Weiterentwicklungen des Event Marketing vorgestellt. Das Buch bietet eine theoretisch fundierte und zugleich praxisnahe, umfassende Darstellung zum gesamten Event-Marketing und -Management. Darüber hinaus untersucht Gerd Nufer die bislang noch wenig erforschte Wirkungsweise des innovativen Kommunikationsinstruments und geht dabei vertiefend auf das Zustandekommen eines Imagetransfers von einem Event auf eine Marke bzw. ein Unternehmen ein. Abschließend werden dauerhafte Markenerlebniswelten als aktuelle Weiterentwicklungen des Event-Marketing vorgestellt.
Purpose of the research paper is to illuminate the subject of assortment policy in the German fashion e‐commerce market. A short literature review is conducted in order to set up a system of characteristics to contemplate assortments on a strategic level. In a second step, structured observations are conducted to quantitatively analyze and compare the assortments of the leading online fashion retailers within Germany. Based on literature, the following characteristics for a classification of assortments can be identified: assortment structure, assortment size, assortment width, assortment depth, assortment consistency and rotation, price level, quality mix, fashion degree as well as the mix of private labels and manufacturer brands. Furthermore, the results of the empirical analysis show that there are currently five leaders within the nalyzed market: Amazon, Otto, Zalando, Baur and About You. Among these five market leaders, Amazon positions itself as a retailer that not only offers an enormous assortment size, but also the lowest entry prices as well as the broadest price dispersion. Through the development of the system of characteristics for assortment analysis and the examination of the current market environment, the findings of this paper contribute to the current state of the art in both theoretical and practical aspects.
Anhand von drei empirischen Studien zeigt Christina Kühnl, wie Unternehmen ihren Innovationsprozess optimieren bzw. wie sie die Adoption einer Innovation in ihrer Organisation sicherstellen können. Dabei vergleicht sie die Erfolgsfaktoren von Produkt- und Dienstleistungsinnovationen unter Berücksichtigung nichtlinearer Effekte, identifiziert unternehmensinterne Erfolgsfaktoren und verdeutlicht, welchen Einfluss das soziale Umfeld auf die individuelle Adoptionsentscheidung ausübt.
Die Lage der öffentlichen Haushalte ist aufgrund der Finanz- und Wirtschaftskrise seit geraumer Zeit angespannt. Bereits während des Bundestagswahlkampfs sowie nach dem Wahlsieg der christlich-liberalen Koalition im Jahr 2009 gab es eine hitzige Debatte über die Vereinbarkeit von Steuersenkungen und nachhaltigen öffentlichen Finanzen. Im vorliegenden Beitrag wird die Frage der Finanzierbarkeit von Steuererleichterungen durch zukünftiges Wirtschaftswachstum diskutiert. Auf Basis aktueller Daten und modelltheoretischer Simulationsberechnungen wird ein wirtschaftspolitisch gangbarer Weg zur Umsetzung des Koalitionsvertrages aufgezeigt.
Maintainability assurance techniques are used to control this quality attribute and limit the accumulation of potentially unknown technical debt. Since the industry state of practice and especially the handling of service- and microservice-based systems in this regard are not well covered in scientific literature, we created a survey to gather evidence for a) used processes, tools, and metrics in the industry, b) maintainability-related treatment of systems based on service orientation, and c) influences on developer satisfaction w.r.t. maintainability. 60 software professionals responded to our online questionnaire. The results indicate that using explicit and systematic techniques has benefits for maintainability. The more sophisticated the applied methods the more satisfied participants were with the maintainability of their software while no link to a hindrance in productivity could be established. Other important findings were the absence of architecture-level evolvability control mechanisms as well as a significant neglect of service-oriented particularities for quality assurance. The results suggest that industry has to improve its quality control in these regards to avoid problems with long living service-based software systems.
To bring a pattern-based perspective to the SOA vs. microservices discussion, we qualitatively analyzed a total of 118 SOA patterns from 2 popular catalogs for their (partial) applicability to microservices. Patterns had to hold up to 5 derived microservices principles to be applicable. 74 patterns (63%) were categorized as fully applicable, 30 (25%) as partially applicable, and 14 (12%) as not applicable. Most frequently violated microservices characteristics werde Decentralization and Single System. The findings suggest that microservices and SOA share a large set of architectural principles and solutions in the general space of service-based systems while only having a small set of differences in specific areas.