Refine
Document Type
- Conference proceeding (138)
- Book chapter (100)
- Journal article (84)
- Anthology (12)
- Book (11)
- Doctoral Thesis (1)
Is part of the Bibliography
- yes (346)
Institute
- Informatik (173)
- ESB Business School (70)
- Texoversum (50)
- Technik (26)
- Life Sciences (24)
- Zentrale Einrichtungen (3)
Publisher
- Springer (346) (remove)
In this presentation the audience will be: (a) introduced to the aims and objectives of the DBTechNet initiative, (b) briefed on the DBTech EXT virtual laboratory workshops (VLW), i.e. the educational and training (E&T) content which is freely available over the internet and includes vendor-neutral hands-on laboratory training sessions on key database technology topics, and (c) informed on some of the practical problems encountered and the way they have been addressed. Last but not least, the audience will be invited to consider incorporating some or all of the DBTech EXT VLW content into their higher education (HE), vocational education and training (VET), and/or lifelong learning/training type course curricula. This will come at no cost and no commitment on behalf of the teacher/trainer; the latter is only expected to provide his/her feedback on the pedagogical value and the quality of the E&T content received/used.
Werttreiber Lean Production
(2013)
Steigern Unternehmen, die Lean-Production-Methoden einsetzten, ihren Unternehmenswert, und wenn ja, wie sehr? Das Autorenteam der Hochschule Reutlingen hat das Zusammenspiel der Managementkonzepte Working Capital Management und Wertorientierung untersucht und stellt die ermutigenden Ergebnisse anhand je eines Szenarios für ein Großunternehmen und ein KMU vor.
The Dow Jones Sustainability Indexes (DJSI) track the performance of companies that lead in corporate sustainability in their respective sectors or in the geographies they operate. The Sustainable Asset Management (SAM) Indexes GmbH publishes and markets the indexes, the so-called Dow Jones Sustainability Indexes in collaboration with SAM. All indexes of the DJSI family are assessed according to SAM’s Corporate Sustainability AssessmentTM methodology.
In the period from the 1950s to 2013, the American Food and Drug Administration (FDA) approved 1346 new molecular entities (NMEs) or new biologics entities (NBEs). On average, the approval rate was 20 NMEs per year. In the past 40 years, the number of new drugs launched into the market increased slightly from 15 NMEs in the 1970s to 25–30 NMEs since the 1990s. The highest number of new drugs approved by FDA was in 1996 and 1997, which might be related to the enactment of the Prescription Drug User Fee Act (PDUFA) in 1993.
The use of Wireless Sensor and Actuator Networks (WSAN) as an enabling technology for Cyber-Physical Systems has increased significantly in recent past. The challenges that arise in different application areas of Cyber- Physical Systems, in general, and in WSAN in particular, are getting the attention of academia and industry both. Since reliability issues for message delivery in wireless communication are of critical importance for certain safety related applications, it is one of the areas that has received significant focus in the research community. Additionally, the diverse needs of different applications put different demands on the lower layers in the protocol stack, thus necessitating such mechanisms in place in the lower layers which enable them to dynamically adapt. Another major issue in the realization of networked wirelessly communicating cyber-physical systems, in general, and WSAN, in particular, is the lack of approaches that tackle the reliability, configurability and application awareness issues together. One could consider tackling these issues in isolation. However, the interplay between these issues create such challenges that make the application developers spend more time on meeting these challenges, and that too not in very optimal ways, than spending their time on solving the problems related to the application being developed. Starting from some fundamental concepts, general issues and problems in cyber-physical systems, this chapter discusses such issues like energy-efficiency, application and channel-awareness for networked wirelessly communicating cyber-physical systems. Additionally, the chapter describes a middleware approach called CEACH, which is an acronym for Configurable, Energy-efficient, Application- and Channel-aware Clustering based middleware service for cyber-physical systems. The state of-the art in the area of cyberphysical systems with a special focus on communication reliability, configurability, application- and channel-awareness is described in the chapter. The chapter also describes how these features have been considered in the CEACH approach. Important node level and network level characteristics and their significance vis-àvis the design of applications for cyber physical systems is also discussed. The issue of adaptively controlling the impact of these factors vis-à-vis the application demands and network conditions is also discussed. The chapter also includes a description of Fuzzy-CEACH which is an extension of CEACH middleware service and which uses fuzzy logic principles. The fuzzy descriptors used in different stages of Fuzzy-CEACH have also been described. The fuzzy inference engine used in the Fuzzy-CEACH cluster head election process is described in detail. The Rule-Bases used by fuzzy inference engine in different stages of Fuzzy-CEACH is also included to show an insightful description of the protocol. The chapter also discusses in detail the experimental results validating the authenticity of the presented concepts in the CEACH approach. The applicability of the CEACH middleware service in different application scenarios in the domain of cyberphysical systems is also discussed. The chapter concludes by shedding light on the Publish-Subscribe mechanisms in distributed event-based systems and showing how they can make use of the CEACH middleware to reliably communicate detected events to the event-consumers or the actuators if the WSAN is modeled as a distributed event-based system.
The capability of the method of Immersion transmission ellipsometry (ITE) (Jung et al. Int Patent WO, 2004/109260) to not only determine three-dimensional refractive indices in anisotropic thin films (which was already possible in the past), but even their gradients along the z-direction (perpendicular to the film plane) is investigated in this paper. It is shown that the determination of orientation gradients in deep-sub-lm films becomes possible by applying ITE in combination with reflection ellipsometry. The technique is supplemented by atomic force microscopy for measuring the film thickness. For a photooriented thin film, no gradient was found, as expected. For a photo-oriented film, which was subsequently annealed in a nematic liquid crystalline phase, an order was found similar to the one applied in vertically aligned nematic displays, with a tilt angle varying along the z-direction. For fresh films, gradients were only detected for the refractive index perpendicular to the film plane, as expected.
Stent graft visualization and planning tool for endovascular surgery using finite element analysis
(2014)
Purpose: A new approach to optimize stent graft selection for endovascular aortic repair is the use of finite element analysis. Once the finite element model is created and solved, a software module is needed to view the simulation results in the clinical work environment. A new tool for Interpretation of simulation results, named Medical Postprocessor, that enables comparison of different stent graft configurations and products was designed, implemented and tested. Methods Aortic endovascular stent graft ring forces and sealing states in the vessel landing zone of three different configurations were provided in a surgical planning software using the Medical Imaging Interaction Tool Kit (MITK) Software system. For data interpretation, software modules for 2D and 3D presentations were implemented. Ten surgeons evaluated the software features of the Medical Postprocessor. These surgeons performed usability tests and answered questionnaires based on their experience with the system.
Results: The Medical Postprocessor visualization system enabled vascular surgeons to determine the configuration with the highest overall fixation force in 16 ± 6 s, best proximal sealing in 56±24 s and highest proximal fixation force in 38 ± 12 s. The majority considered the multiformat data provided helpful and found the Medical Postprocessor to be an efficient decision support system for stent graft selection. The evaluation of the user interface results in an ISONORMconform user interface (113.5 points).
Conclusion: The Medical Postprocessor visualization Software tool for analyzing stent graft properties was evaluated by vascular surgeons. The results show that the software can assist the interpretation of simulation results to optimize stent graft configuration and sizing.
Intra-operative fluoroscopy-guided assistance system for transcatheter aortic valve implantation
(2014)
A new surgical assistance system has been developed to assist the correct positioning of the AVP during transapical TAVI. The developed assistance system automatically defines the target area for implanting the AVP under live 2-D fluoroscopy guidance. Moreover, this surgical assistance system works with low levels of contrast agent for the final deployment of AVP, reducing therefore long-term negative effects, such as renal failure in the elderly and high-risk patients.
Several diseases occur due to asbestos exposure. Until today, asbestos predicted mortality and morbidity will increase because of the long latency period. Actually, the methods to investigate asbestos related disease are mostly invasive. Therefore, the aim of the present paper was to investigate, whether signals in human breath could be correlated to Asbestos related lung diseases using a multi-capillary column (MCC) connected to an ion mobility spectrometer (IMS) as non-invasive method. Here, the breath samples of 10 mL of 25 patients suffering from asbestos related diseases. This group includes patients with asbestos related pleural thickening with and without pulmonary fibrosis. Twelve healthy persons constitute the control group and the breath samples are compared with those of the BK4103 patients. In total 83 peaks are found in the IMS-Chromatogram. A discrimination was possible with p-values <0.001 for two peaks (99.9 %), <0.01 (99 %) for 5 peaks and <0.05 (95 %) for 17 peaks. The most discrimination peaks alpha pinene and 4-ethyltoluol were identified among some others with lower p-values. The corresponding Box-and-Whisker-Plots comparing both groups are presented. In addition, a decision tree including all peaks was created that shows a differentiation with alpha pinene between BK4103 (pleural plaques group) and the control group. In addition, the sensitivity was calculated to 96 %, specificity was 50 %, positive and negative predictive values were 80 % and 86 %. Ion mobility spectrometry was introduced as non-invasive method to separate both groups Asbestos related and healthy. Naturally, the findings need further confirmation on larger population groups, but encourage further investigations, too.
Children undergoing systemic chemotherapy often suffer from severe immunosuppression usually associated to severe neutropenia (neutrophils < 0.5 x 109/l). Clinical courses during those periods range from asymptomatic to septic general conditions. Development of septic symptoms can be very fast and life-threatening. Swift detection of risk factors in those patients is therefore needed. So far no early, rapid and reliable marker or tool exists. Ion-Mobility-Spectrometry coupled with a Multi-Capillary-Column (IMS-MCC) can analyze more than 600 volatile components from exhaled air within a few minutes and hence is a potential, rapid detection-tool. As a proof of concept we measured the exhaled breath of 11 patients with neutropenia and 10 healthy controls ranging from 3 to 18 years of age at the time of measurement. Ten milliliters breath samples were taken at the outpatient clinic and analyzed with an onsite IMS-MCC (BreathDiscovery, B&S Analytik, Dortmund, Germany). Dead-space-volume was adapted to two groups (small 250 ml, large 500 ml). Interestingly 59 differing peaks were measured. Eleven were significantly different (p ≤ 0.05), three of which highly significant (p ≤ 0.01) in Mann-Whitney-Rank-Sum-testing. The corresponding analytes used in the decision tree are 2-Propanol, D-Limonene and Acetone. The analytes with the lowest rank sum identified are 2-Hexanone, Iso-Propylamine and 1-Butanol. Eventually we were able to show a three-step-decision-tree, which discerns the 21 samples except one from each group. Sensitivity was 90 % and specificity was 91 %. Naturally these findings need further confirmation within a bigger population. Our pilot-study proves that Ion-Mobility-Spectrometry coupled with a Multi-Capillary-Column is a feasible rapid diagnostic tool in the setting of a pediatric oncology out-patient clinic for patients 3 years and older. Our first results furthermore encourage additional analysis as to whether patients at risk for septic events during immunosuppression can be diagnosed in advance by rapidly assessing risk factors such as Neutropenia in exhaled breath.
Ion mobility spectrometry coupled to multi capillary columns (MCC/IMS) combines highly sensitive spectrometry with a rapid separation technique. MCC\IMS is widely used for biomedical breath analysis. The identification of molecules in such a complex sample necessitates a reference database. The existing IMS reference databases are still in their infancy and do not allow to actually identify all analytes. With a gas chromatograph coupled to a mass selective detector (GC/MSD) setup in parallel to a MCC/IMS instrumentation we may increase the accuracy of automatic analyte identification. To overcome the time-consuming manual evaluation and comparison of the results of both devices, we developed a software tool MIMA (MS-IMS-Mapper), which can computationally generate analyte layers for MCC/IMS spectra by using the corresponding GC/MSD data. We demonstrate the power of our method by successfully identifying the analytes of a seven-component mixture. In conclusion, the main contribution of MIMA is a fast and easy computational method for assigning analyte names to yet un-assigned signals in MCC/IMS data. We believe that this will greatly impact modern MCC/IMS-based biomarker research by 'giving a name' to previously detected disease-specific molecules.
Increasing concerns regarding the world´s natural resources and sustainability continue to be a major issue for global development. As a result several political initiatives and strategies for green or resource-efficient growth both on national and international levels have been proposed. A core element of these initiatives is the promotion of an increase of resource or material productivity. This dissertation examines material productivity developments in the OECD and BRICS countries between 1980 and 2008. By applying the concept of convergence stemming from economic growth theory to material productivity the analysis provides insights into both aspects: material productivity developments in general as well potentials for accelerated improvements in material productivity which consequently may allow a reduction of material use globally. The results of the convergence analysis underline the importance of policy-making with regard to technology and innovation policy enabling the production of resource-efficient products and services as well as technology transfer and diffusion.
A configuration-management-database driven approach for fabric-process specification and automation
(2014)
In this paper we describe an approach that integrates a Configuration- Management-Database into fabric-process specification and automation in order to consider different conditions regarding to cloud-services. By implementing our approach, the complexity of fabric processes gets reduced. We developed a prototype by using formal prototyping principles as research methods and integrated the Configuration-Management-Database Command into the Workflow- Management-System Activiti. We used this prototype to evaluate our approach. We implemented three different fabric-processes and show that by using our approach the complexity of these three fabric-processes gets reduced.
The analysis of exhaled metabolites has become a promising field of research in recent decades. Several volatile organic compounds reflecting metabolic disturbance and nutrition status have even been reported. These are particularly important for long-term measurements, as needed in medical research for detection of disease progression and therapeutic efficacy. In this context, it has become urgent to investigate the effect of fasting and glucose treatment for breath analysis. In the present study, we used amodel of ventilated rats that fasted for 12 h prior to the experiment. Ten rats per group were randomly assigned for continuous intravenous infusion without glucose or an infusion including 25 mg glucose per 100 g per hour during an observation period of 12 h. Exhaled gas was analysed using multicapillary column ion-mobility spectrometry. Analytes were identified by the BS-MCC/IMS database (version 1209; B & S Analytik, Dortmund, Germany). Glucose infusion led to a significant increase in blood glucose levels (p<0.05 at 4 h and thereafter) and cardiac output (p<0.05 at 4 h and thereafter). During the observation period, 39 peaks were found collectively. There were significant differences between groups in the concentration of ten volatile organic compounds: p<0.001 at 4 h and thereafter for isoprene, cyclohexanone, acetone, p-cymol, 2-hexanone, phenylacetylene, and one unknown compound, and p<0.001 at 8 h and thereafter for 1-pentanol, 1-propanol, and 2-heptanol. Our results indicate that for long-term measurement, fasting and the withholding of glucose could contribute to changes of volatile metabolites in exhaled air.
Social and environmental risk management in supply chains : a survey in the clothing industry
(2015)
Almost daily, news indicates that there are environmental and social problems in globally fragmented supply chains. Even though conceptualisations of sustainable supply chain management suggest supplier-related risk management for sustainable products and processes as substantial for companies, research on how risk management for environmental and social issues in supply chains is performed has so far been neglected. This study aims at analysing both why companies in the clothing industry are performing management of social and environmental risks in their supply chain and what kind of action they are taking. Based on the literature on sustainable supply chain management and supply chain risk management as well as 10 expert interviews, a conceptual model for risk management in sustainable supply chains was developed. This model was tested in an empirical study in the clothing industry. The data were analysed by structural equation modelling. Results of the research show high statistical significance for the respective conceptual model. The main driver to perform risk management in environmental and social affairs is pressures and incentives from stakeholders. While companies’ corporate orientation mainly drives social actions, top management drives environmental affairs for differentiating themselves from competitors.
Delivering value to customers in real-time requires companies to utilize real-time deployment of software to expose features to users faster, and to shorten the feedback loop. This allows for faster reaction and helps to ensure that the development is focused on features providing real value. Continuous delivery is a development practice where the software functionality is deployed continuously to customer environment. Although this practice has been established in some domains such as B2C mobile software, the B2B domain imposes specific challenges. This article presents a case study that is conducted in a medium-sized software company operating in the B2B domain. The objective of this study is to analyze the challenges and benefits of continuous delivery in this domain. The results suggest that technical challenges are only one part of the challenges a company encounters in this transition. The company must also address challenges related to the customer and procedures. The core challenges are caused by having multiple customers with diverse environments and unique properties, whose business depends on the software product. Some customers require to perform manual acceptance testing, while some are reluctant towards new versions. By utilizing continuous delivery, it is possible for the case company to shorten the feedback cycles, increase the reliability of new versions, and reduce the amount of resources required for deploying and testing new releases.
Software development as an experiment system : a qualitative survey on the state of the practice
(2015)
An experiment-driven approach to software product and service development is gaining increasing attention as a way to channel limited resources to the efficient creation of customer value. In this approach, software functionalities are developed incrementally and validated in continuous experiments with stakeholders such as customers and users. The experiments provide factual feedback for guiding subsequent development. Although case studies on experimentation in industry exist, the understanding of the state of the practice and the encountered obstacles is incomplete. This paper presents an interview-based qualitative survey exploring the experimentation experiences of ten software development companies. The study found that although the principles of continuous experimentation resonated with industry practitioners, the state of the practice is not yet mature. In particular, experimentation is rarely systematic and continuous. Key challenges relate to changing organizational culture, accelerating development cycle speed, and measuring customer value and product
success.
For years, agile methods are considered the most promising route toward successful software development, and a considerable number of published studies the (successful) use of agile methods and reports on the benefits companies have from adopting agile methods. Yet, since the world is not black or white, the question for what happened to the traditional models arises. Are traditional models replaced by agile methods? How is the transformation toward Agile managed, and, moreover, where did it start? With this paper we close a gap in literature by studying the general process use over time to investigate how traditional and agile methods are used. Is there coexistence or do agile methods accelerate the traditional processes’ extinction? The findings of our literature study comprise two major results: First, studies and reliable numbers on the general process model use are rare, i.e., we lack quantitative data on the actual process use and, thus, we often lack the ability to ground process-related research in practically relevant issues. Second, despite the assumed dominance of agile methods, our results clearly show that companies enact context-specific hybrid solutions in which traditional and agile development approaches are used in combination.
New or adapted digital business models have huge impacts on Enterprise Architectures (EA) and require them to become more agile, flexible, and adaptable. All these changes are happening frequently and are currently not well documented. An EA consists of a lot of elements with manifold relationships between them. Thus changing the business model may have multiple impacts on other architectural elements. The EA engineering process deals with the development, change and optimization of architectural elements and their dependencies. Thus an EA provides a holistic view for both business and IT from the perspective of many stakeholders, which are involved in EA decision-making processes. Different stakeholders have specific concerns and are collaborating today in often unclear decision-making processes. In our research we are investigating information from collaborative decision-making processes to support stakeholders in taking current decisions. In addition we provide all information necessary to understand how and why decisions were taken. We are collecting the decision-related information automatically to minimize manual time intensive work as much as possible. The core contribution of our research extends a decisional metamodel, which links basic decisions with architectural elements and extends them with an associated decisional case context. Our aim is to support a new integral method for multi perspective and collaborative decision-making processes. We illustrate this by a practice-relevant decision-making scenario for Enterprise Architecture Engineering.