Refine
Document Type
- Journal article (1244) (remove)
Is part of the Bibliography
- yes (1244)
Institute
- ESB Business School (531)
- Life Sciences (286)
- Informatik (199)
- Technik (153)
- Texoversum (68)
- Zentrale Einrichtungen (7)
Publisher
- Elsevier (199)
- Springer (131)
- MDPI (98)
- Wiley (55)
- De Gruyter (53)
- IEEE (30)
- American Chemical Society (24)
- MIM, Marken-Institut München (24)
- Emerald (21)
- Hanser (15)
This paper presents the first part of a research-work conducted at the University of Applied Sciences (HFT- Stuttgart). The aim of the research was to investigate the potential of low-cost renewable energy systems to reduce the energy demand of the building sector in hot and dry areas. Radiative cooling to the night sky represents a low-cost renewable energy source. The dry desert climate conditions promote radiative cooling applications. The system technology adopted in this work is based on uncovered solar thermal collectors integrated into the building’s hydronic system. By implementing different control strategies, the same system could be used for cooling as well as for heating applications. This paper focuses on identifying the collector parameters which are required as the coefficients to configure such an unglazed collector for calibrating its mathematical model within the simulation environment. The parameter identification process implies testing the collector for its thermal performance. This paper attempts to provide an insight into the dynamic testing of uncovered solar thermal collectors (absorbers), taking into account their prospective operation at nighttime for radiative cooling applications. In this study, the main parameters characterizing the performance of the absorbers for radiative cooling applications are identified and obtained from standardized testing protocol. For this aim, a number of plastic solar absorbers of different designs were tested on the outdoor test-stand facility at HFT-Stuttgart for the characterization of their thermal performance. The testing process was based on the quasi-dynamic test method of the international standard for solar thermal collectors EN ISO 9806. The test database was then used within a mathematical optimization tool (GenOpt) to determine the optimal parameter settings of each absorber under testing. Those performance parameters were significant to compare the thermal performance of the tested absorbers. The coefficients (identified parameters) were used then to plot the thermal efficiency curves of all absorbers, for both the heating and cooling modes of operation. Based on the intended main scope of the system utilization (heating or cooling), the tested absorbers could be benchmarked. Hence, one of those absorbers was selected to be used in the following simulation phase as was planned in the research-project.
During the first years of the last decade, Egypt used to face recurrent electricity cut-offs in summer. In the past few years, the electricity tariff dramatically increased. Radiative cooling to the clear night sky is a renewable energy source that represents a relative solution. The dry desert climate promotes nocturnal radiative cooling applications. This study investigates the potential of nocturnal radiative cooling systems (RCSs) to reduce the energy consumption of the residential building sector in Egypt. The system technology proposed in this work is based on uncovered solar thermal collectors integrated into the building hydronic system. By implementing different control strategies, the same system could be used for both cooling and heating applications. The goal of this paper is to analyze the performance of RCSs in residential buildings in Egypt. The dynamic simulation program TRNSYS was used to simulate the thermal behavior of the system. The relevant issues of Egypt as a case-study are firstly overviewed. Then the paper introduces the work done to develop a building model that represents a typical residential apartment in Egypt. Typical occupancy profiles were developed to define the internal thermal gains. The adopted control strategy to optimize the system operation is presented as well. To fully understand and hence evaluate the operation of the proposed RCS, four simulation cases were considered: 1. a reference case (fully passive), 2. the stand-alone operation of the RCS, 3. ideal heating & cooling operation (fully-active), and 4. the hybrid-operation (when the active cooling system is supported by the proposed RCS). The analysis considered the main three distinct climates in Egypt, represented by the cities of Alexandria, Cairo and Asyut. The hotter and drier weather conditions resulted in a higher cooling potential and larger temperature differences. The simulated cooling power in Asyut was 28.4 W/m² for a 70 m² absorber field. For a smaller field area of 10 m², the cooling power reached 109 W/m² but with humble temperature differences. To meet the rigorous thermal comfort conditions, the proposed sensible RCS cannot fully replace conventional air-conditioning units, especially in humid areas like Alexandria. When working in a hybrid system, a 10% reduction in the active cooling energy demand could be achieved in Asyut to keep the cooling set-point at 24 °C. This percentage reduction was nearly doubled when the thermal comfort set-point was increased by two degrees (26 °C). In a sensitivity analysis, external shading devices as a passive measure as well as the implementation of the Egyptian code for buildings (ECP306/1–2005) were also investigated. The analysis of this study raised other relevant aspects to discuss, e.g. system-sizing, environmental effects, limitations and recommendations.
Learning factories present a promising environment for education, training and research, especially in manufacturing related areas which are a main driver for wealth creation in any nation. While numerous learning factories have been built in industry and academia in the last decades, a comprehensive scientific overview of the topic is still missing. This paper intends to close this gap establishing the state of the art of learning factories. The motivations, historic background, and the didactic foundations of learning factories are outlined. Definitions of the term learning factory and the corresponding morphological model are provided. An overview of existing learning factory approaches in industry and academia is provided, showing the broad range of different applications and varying contents. The state of the art of learning factories curricula design and their use to enhance learning and research as well as potentials and limitations are presented. Conclusions and an outlook on further research priorities are offered.
In the last decade, numerous learning factories for education, training, and research have been built up in industry and academia. In recent years learning factory initiatives were elevated from a local to a European and then to a worldwide level. In 2014 the CIRP Collaborative Working Group (CWG) on Learning Factories enables a lively exchange on the topic "Learning Factories for future oriented research and education in manufacturing". In this paper results of discussions inside the CWG are presented. First, what is meant by the term Learning Factory is outlined. Second, based on the definition a description model (morphology) for learning factories is presented. The morphology covers the most relevant characteristics and features of learning factories in seven dimensions. Third, following the morphology the actual variance of learning factory manifestations is shown in six learning factory application scenarios from industrial training over education to research. Finally, future prospects of the learning factory concept are presented.
The physicochemical properties of synthetically produced bone substitute materials (BSM) have a major impact on biocompatibility. This affects bony tissue integration, osteoconduction, as well as the degradation pattern and the correlated inflammatory tissue responses including macrophages and multinucleated giant cells (MNGCs). Thus, influencing factors such as size, special surface morphologies, porosity, and interconnectivity have been the subject of extensive research. In the present publication, the influence of the granule size of three identically manufactured bone substitute granules based on the technology of hydroxyapatite (HA)-forming calcium phosphate cements were investigated, which includes the inflammatory response in the surrounding tissue and especially the induction of MNGCs (as a parameter of the material degradation). For the in vivo study, granules of three different size ranges (small = 0.355–0.5 mm; medium = 0.5–1 mm; big = 1–2 mm) were implanted in the subcutaneous connective tissue of 45 male BALB/c mice. At 10, 30, and 60 days post implantationem, the materials were explanted and histologically processed. The defect areas were initially examined histopathologically. Furthermore, pro- and anti-inflammatory macrophages were quantified histomorphometrically after their immunohistochemical detection. The number of MNGCs was quantified as well using a histomorphometrical approach. The results showed a granule size-dependent integration behavior. The surrounding granulation tissue has passivated in the groups of the two bigger granules at 60 days post implantationem including a fibrotic encapsulation, while a granulation tissue was still present in the group of the small granules indicating an ongoing cell-based degradation process. The histomorphometrical analysis showed that the number of proinflammatory macrophages was significantly increased in the small granules at 60 days post implantationem. Similarly, a significant increase of MNGCs was detected in this group at 30 and 60 days post implantationem. Based on these data, it can be concluded that the integration and/or degradation behavior of synthetic bone substitutes can be influenced by granule size.
With the expansion of cyber-physical systems (CPSs) across critical and regulated industries, systems must be continuously updated to remain resilient. At the same time, they should be extremely secure and safe to operate and use. The DevOps approach caters to business demands of more speed and smartness in production, but it is extremely challenging to implement DevOps due to the complexity of critical CPSs and requirements from regulatory authorities. In this study, expert opinions from 33 European companies expose the gap in the current state of practice on DevOps-oriented continuous development and maintenance. The study contributes to research and practice by identifying a set of needs. Subsequently, the authors propose a novel approach called Secure DevOps and provide several avenues for further research and development in this area. The study shows that, because security is a cross-cutting property in complex CPSs, its proficient management requires system-wide competencies and capabilities across the CPSs development and operation.
Der betriebswirtschaftlichen Forschung in der Textil- und Bekleidungsindustrie gelingt es nicht, Lösungen zu erarbeiten, die das Nachhaltigkeitsproblem der Branche lösen. Dies liegt primär an der Art und Weise, wie in unserem Fachbereich geforscht wird. In Anbetracht der Problemstellung kann der starke Fokus auf empirische Arbeiten nur eine begrenzte Hilfestellung leisten. Denn empirische Forschung erfolgt innerhalb der bestehenden Denkmuster und ist tendenziell gegenwarts- oder vergangenheitsorientiert. Für die Lösung zukunftsorientierter Fragestellungen werden jedoch völlig neue Parameter und Logiken benötigt. Ein Umdenken ist gefragt.
Implementation of product-service systems (PSS) requires structural changes in the way that business in manufacturing industries is traditionally conducted. Literature frequently mentions the importance of human resource management (HRM), since people are involved in the entire process of PSS development and employees are the primary link to customers. However, to this day, no study has provided empirical evidence whether and in what way HRM of firms that implement PSS differs from HRM of firms that solely run a traditional manufacturing based business model. The aim of this study is to contribute to closing this gap by investigating the particular HR components of manufacturing firms that implement PSS and compare it with the HRM of firms that do not. The context of this study is the fashion industry, which is an ideal setting since it is a mature and highly competitive industry that is well-documented for causing significant environmental impact. PSS present a promising opportunity for fashion firms to differentiate and mitigate the industry’s ecological footprint. Analysis of variance (ANOVA) was conducted to analyze data of 102 international fashion firms. Findings reveal a significant higher focus on nearly the entire spectrum of HRM components of firms that implement PSS compared with firms that do not. Empirical findings and their interpretation are utilized to propose a general framework of the role of HRM for PSS implementation. This serves as a departure point for both scholars and practitioners for further research, and fosters the understanding of the role of HRM for managing PSS implementation.
Jeder weiß, dass die Textil- und Bekleidungsindustrie ein Nachhaltigkeitsproblem hat und es neuer Lösungsansätze bedarf. Auch Konsumenten und deren Verhalten haben einen entscheidenden Einfluss auf die Erfolgsaussichten einer nachhaltigen Entwicklung. Welche Rolle und Bedeutung obliegt jedoch dem einzelnen Mitarbeiter in diesem Prozess? Und welche Handlungsmaßnahmen können daraus abgeleitet werden? Eine empirische Analyse von über 100 internationalen Bekleidungsunternehmen gibt Aufschluss.
The fashion industry is well documented for causing significant environmental impact. Product-service systems (PSS) present a promising way to solve this challenge. PSS shift the focus toward complementary service offers, which decouples customer satisfaction from material consumption and entails dematerialization. However, PSS are not ecoefficient by nature but need to be accompanied by corporate environmental management (CEM) practices. The objective of this article is to examine the potential of PSS to contribute to the environmental sustainability of today's fashion industry by investigating if fashion firms with a positive attitude toward PSS implementation also pursue goals related to the ecological environment. For this purpose, analysis of variance (ANOVA) is conducted to analyze data of 102 fashion firms. Results reveal that the diffusion of PSS in today's fashion industry is low and few firms consider implementing PSS. Results, furthermore, demonstrate that PSS implementation is positively related to CEM. This indicates that existing structures of CEM favor PSS implementation and unlock the eco-efficient potential of implemented PSS in the fashion industry.
In recent years the share economy has gained widespread success across different industries. Since small firms and new ventures obtain fewer resources, an increased focus on service allows them to differentiate and compete with cost pressure in traditionally manufacturing based industries. There still is a lack of understanding how these firms manage to successfully shift towards service-oriented business models. This paper adopts a dynamic capabilities approach to examine the particular microfoundations that underlie sensing, seizing and reconfiguring dynamic capabilities of early-stage service firms within a traditional retail market. The context of this study is the fashion industry. It is an ideal setting since it is characterized by severe competition, short life cycles, strong cost pressure and high volatility. There are few but increasing examples of entrepreneurial initiatives that try to compete by providing offers to resell, rent or swap clothes. Qualitative data of five early stage fashion ventures is analyzed. Findings reveal that the ability to develop and maintain long-term relationships is essential. It has also been found crucial to acquire knowledge from external network partners, delegate tasks and share information. Furthermore, skills for interacting with customers and adopting consumer feedback are critical. This study provides empirical evidence of dynamic capabilities of early-stage firms and contributes to knowledge on the factors that facilitate servitization in traditionally manufacturing based industries. For practitioners, the presented microfoundations provide a framework of critical tasks that allow them to develop and maintain a service oriented business model.
Venture capital and the innovative power of a state : econometric study including Google data
(2015)
This article focuses on venture capital investments and the innovative power of a state defined by its public infrastructure. The economic implications are evaluated by estimating several panel regression models. The novelty is twofold: on the one hand the research approach and on the other hand the new data set. The data ranges from 1995 to 2014 and consists of 10 European countries plus the US and Canada. For the first time we include Google search data on Venture Capital. The results show a significant increase in Venture Capital is mainly determined by economic conditions such as real GDP growth. The impact of the innovative power of a state is not significant. We find that Google data is positively related and significant in respect to Venture Capital investments too. Consequently, we confirm that private business investments cannot be created by government policy alone rather via solid macroeconomic conditions.
User innovators follow multiple diffusion and adoption pathways for their self-developed innovations. Users may choose to commercialize their self-developed products on the marketplace by becoming entrepreneurs. Few studies exist that focus on understanding personal and interpersonal factors that affect some user innovators’ entrepreneurial decision-making. Hence, this paper focuses on how user innovators make key decisions relating to opportunity recognition and evaluation and when opportunity evaluation leads to subsequent entrepreneurial action in the entrepreneurial process. We conducted an exploratory study using a multi-grounded theory methodology as the user entrepreneurship phenomenon embodies complex social processes. We collected data through the netnography approach that targeted 18 entrepreneurs with potentially relevant differences through crowdfunding platforms. We integrated self-determination, human capital, and social capital theory to address the phenomena under study. This study’s significant findings posit that users’ motives are dissatisfaction with existing goods, interest in innovation, altruism, social recognition, desire for independence, and economic benefits. Besides, use-related experience, product-related knowledge, product diffusion, and iterative feedback positively impact innovative users’ entrepreneurial decision-making.
Different types of raw cotton were investigated by a commercial ultraviolet-visible/near infrared (UV-Vis/NIR) spectrometer (210–2200 nm) as well as on a home-built setup for NIR hyperspectral imaging (NIR-HSI) in the range 1100–2200 nm. UV-Vis/NIR reflection spectroscopy reveals the dominant role proteins, hydrocarbons and hydroxyl groups play in the structure of cotton. NIR-HSI shows a similar result. Experimentally obtained data in combination with principal component analysis (PCA) provides a general differentiation of different cotton types. For UV-Vis/NIR spectroscopy, the first two principal components (PC) represent 82 % and 78 % of the total data variance for the UV-Vis and NIR regions, respectively. Whereas, for NIR-HSI, due to the large amount of data acquired, two methodologies for data processing were applied in low and high lateral resolution. In the first method, the average of the spectra from one sample was calculated and in the second method the spectra of each pixel were used. Both methods are able to explain ≥90 % of total variance by the first two PCs. The results show that it is possible to distinguish between different cotton types based on a few selected wavelength ranges. The combination of HSI and multivariate data analysis has a strong potential in industrial applications due to its short acquisition time and low-cost development. This study opens a novel possibility for a further development of this technique towards real large-scale processes.
Hyperspectral imaging and reflectance spectroscopy in the range from 200–380 nm were used to rapidly detect and characterize copper oxidation states and their layer thicknesses on direct bonded copper in a non-destructive way. Single-point UV reflectance spectroscopy, as a well-established method, was utilized to compare the quality of the hyperspectral imaging results. For the laterally resolved measurements of the copper surfaces an UV hyperspectral imaging setup based on a pushbroom imager was used. Six different types of direct bonded copper were studied. Each type had a different oxide layer thickness and was analyzed by depth profiling using X-ray photoelectron spectroscopy. In total, 28 samples were measured to develop multivariate models to characterize and predict the oxide layer thicknesses. The principal component analysis models (PCA) enabled a general differentiation between the sample types on the first two PCs with 100.0% and 96% explained variance for UV spectroscopy and hyperspectral imaging, respectively. Partial least squares regression (PLS-R) models showed reliable performance with R2c = 0.94 and 0.94 and RMSEC = 1.64 nm and 1.76 nm, respectively. The developed in-line prototype system combined with multivariate data modeling shows high potential for further development of this technique towards real large-scale processes.
UV hyperspectral imaging (225 nm–410 nm) was used to identify and quantify the honey- dew content of real cotton samples. Honeydew contamination causes losses of millions of dollars annually. This study presents the implementation and application of UV hyperspectral imaging as a non-destructive, high-resolution, and fast imaging modality. For this novel approach, a reference sample set, which consists of sugar and protein solutions that were adapted to honeydew, was set-up. In total, 21 samples with different amounts of added sugars/proteins were measured to calculate multivariate models at each pixel of a hyperspectral image to predict and classify the amount of sugar and honeydew. The principal component analysis models (PCA) enabled a general differentiation between different concentrations of sugar and honeydew. A partial least squares regression (PLS-R) model was built based on the cotton samples soaked in different sugar and protein concentrations. The result showed a reliable performance with R2cv = 0.80 and low RMSECV = 0.01 g for the valida- tion. The PLS-R reference model was able to predict the honeydew content laterally resolved in grams on real cotton samples for each pixel with light, strong, and very strong honeydew contaminations. Therefore, inline UV hyperspectral imaging combined with chemometric models can be an effective tool in the future for the quality control of industrial processing of cotton fibers.
Due to its wide-ranging endocrine functions, adipose tissue influences the whole body’s metabolism. Engineering long-term stable and functional human adipose tissue is still challenging due to the limited availability of suitable biomaterials and adequate cell maturation. We used gellan gum (GG) to create manual and bioprinted adipose tissue models because of its similarities to the native extracellular matrix and its easily tunable properties. Gellan gum itself was neither toxic nor monocyte activating. The resulting hydrogels exhibited suitable viscoelastic properties for soft tissues and were stable for 98 days in vitro. Encapsulated human primary adipose-derived stem cells (ASCs) were adipogenically differentiated for 14 days and matured for an additional 84 days. Live-dead staining showed that encapsulated cells stayed viable until day 98, while intracellular lipid staining showed an increase over time and a differentiation rate of 76% between days 28 and 56. After 4 weeks of culture, adipocytes had a univacuolar morphology, expressed perilipin A, and secreted up to 73% more leptin. After bioprinting establishment, we demonstrated that the cells in printed hydrogels had high cell viability and exhibited an adipogenic phenotype and function. In summary, GG-based adipose tissue models show long-term stability and allow ASCs maturation into functional, univacuolar adipocytes.
Adipose tissue is related to the development and manifestation of multiple diseases, demonstrating the importance of suitable in vitro models for research purposes. In this study, adipose tissue lobuli were explanted, cultured, and used as an adipose tissue control to evaluate in vitro generated adipose tissue models. During culture, lobule exhibited a stable weight, lactate dehydrogenase, and glycerol release over 15 days. For building up in vitro adipose tissue models, we adapted the biomaterial gelatin methacryloyl (GelMA) composition and handling to homogeneously mix and bioprint human primary mature adipocytes (MA) and adipose-derived stem cells (ASCs), respectively. Accelerated cooling of the bioink turned out to be essential for the homogeneous distribution of lipid-filled MAs in the hydrogel. Last, we compared manual and bioprinted GelMA hydrogels with MA or ASCs and the explanted lobules to evaluate the impact of the printing process and rate the models concerning the physiological reference. The viability analyses demonstrated no significant difference between the groups due to additive manufacturing. The staining of intracellular lipids and perilipin A suggest that GelMA is well suited for ASCs and MA. Therefore, we successfully constructed physiological in vitro models by bioprinting MA-containing GelMA bioinks.
Influence of the respirator on volatile organic compounds : an animal study in rats over 24 hours
(2015)
Long-term animal studies are needed to accomplish measurements of volatile organic compounds (VOCs) for medical diagnostics. In order to analyze the time course of VOCs, it is necessary to ventilate these animals. Therefore, a total of 10 male Sprague–Dawley rats were anaesthetized and ventilated with synthetic air via tracheotomy for 24 h. An ion mobility spectrometry coupled to multi-capillary columns (MCC–IMS) was used to analyze the expired air. To identify background contaminations produced by the respirator itself, six comparative measurements were conducted with ventilators only. Overall, a number of 37 peaks could be detected within the positive mode. According to the ratio peak intensity rat/ peak intensity ventilator blank, 22 peaks with a ratio >1.5 were defined as expired VOCs, 12 peaks with a ratio between 0.5 and 1.5 as unaffected VOCs, and three peaks with a ratio <0.5 as resorbed VOCs. The peak intensity of 12 expired VOCs changed significantly during the 24 h measurement. These results represent the basis for future intervention studies. Notably, online VOC analysis with MCC–IMS is possible over 24 h in ventilated rats and allows different experimental approaches.
In the IGF project No. 19617 N, nitrogen and phosphorous substituted alkoxysilanes were prepared and their ability to inhibit fire growth and spread for fabrics was explored. To this end, a series of flame retardants were synthesized using different strategies including click chemistry and nucleophilic substitution of commercial organophosphorus compounds with amino-based trialkoxysilanes and/or cyanuric chloride. The new halogen-free and aldehyde-free flame retardants were applied to different fabrics such as cotton (CO), polyethylene terephthalate (PET), polyamide (PA) and their blends using the well-known pad-dry-cure technique and sol-gel method. The flame-retarding efficiencies were evaluated by EN ISO 15025 test methods (protective clothing-protection against heat and flame method of test for limited flame spread). Good flame retardancy of the hybrid organic-inorganic materials was achieved with the addition of as small amount as 3-5 wt.% for cotton fabrics. Moreover, the water solubility and the washing resistance could be controlled through the functional groups attached to the phosphor atom or through the optimization of the curing temperature. Overall, the research project demonstrated that N-P-silanes are very good permanent flame retardants for textiles.