Refine
Document Type
- Article (55) (remove)
Has Fulltext
- yes (55) (remove)
Is part of the Bibliography
- yes (55)
Institute
- Angewandte Chemie (19)
- ESB Business School (19)
- Informatik (14)
- Technik (2)
- Zentrale Einrichtungen (1)
Publisher
- Springer (55) (remove)
One of the key challenges for automatic assistance is the support of actors in the operating room depending on the status of the procedure. Therefore, context information collected in the operating room is used to gain knowledge about the current situation. In literature, solutions already exist for specific use cases, but it is doubtful to what extent these approaches can be transferred to other conditions. We conducted a comprehensive literature research on existing situation recognition systems for the intraoperative area, covering 274 articles and 95 cross-references published between 2010 and 2019. We contrasted and compared 58 identified approaches based on defined aspects such as used sensor data or application area. In addition, we discussed applicability and transferability. Most of the papers focus on video data for recognizing situations within laparoscopic and cataract surgeries. Not all of the approaches can be used online for real-time recognition. Using different methods, good results with recognition accuracies above 90% could be achieved. Overall, transferability is less addressed. The applicability of approaches to other circumstances seems to be possible to a limited extent. Future research should place a stronger focus on adaptability. The literature review shows differences within existing approaches for situation recognition and outlines research trends. Applicability and transferability to other conditions are less addressed in current work.
Public transport maps are typically designed in a way to support route finding tasks for passengers, while they also provide an overview about stations, metro lines, and city-specific attractions. Most of those maps are designed as a static representation, maybe placed in a metro station or printed in a travel guide. In this paper, we describe a dynamic, interactive public transport map visualization enhanced by additional views for the dynamic passenger data on different levels of temporal granularity. Moreover, we also allow extra statistical information in form of density plots, calendar-based visualizations, and line graphs. All this information is linked to the contextual metro map to give a viewer insights into the relations between time points and typical routes taken by the passengers. We also integrated a graph-based view on user-selected routes, a way to interactively compare those routes, an attribute- and property-driven automatic computation of specific routes for one map as well as for all available maps in our repertoire, and finally, also the most important sights in each city are included as extra information to include in a user-selected route. We illustrate the usefulness of our interactive visualization and map navigation system by applying it to the railway system of Hamburg in Germany while also taking into account the extra passenger data. As another indication for the usefulness of the interactively enhanced metro maps we conducted a controlled user experiment with 20 participants.
Das Weltwirtschaftswachstum der vergangenen Jahrzehnte war durch die Dynamik der Digitalisierung und Globalisierung in den Lieferketten geprägt. Die Corona-Pandemie hat die Abhängigkeit und Verletzlichkeit der Lieferketten offengelegt. Trotz einer Vielzahl verbindlicher Standards haben Unternehmen die Digitalisierung und Arbeitsteilung auch für regulatorische Arbitrage genutzt. Einerseits erhöht das die Effizienz der Wirtschaft - was mithin ökologische Ressourcen schont - andererseits werden damit internationale Standards konterkariert. Globalisierung und Digitalisierung sind Segen und Fluch zugleich.
Purpose
Injury or inflammation of the middle ear often results in the persistent tympanic membrane (TM) perforations, leading to conductive hearing loss (HL). However, in some cases the magnitude of HL exceeds that attributable by the TM perforation alone. The aim of the study is to better understand the effects of location and size of TM perforations on the sound transmission properties of the middle ear.
Methods
The middle ear transfer functions (METF) of six human temporal bones (TB) were compared before and after perforating the TM at different locations (anterior or posterior lower quadrant) and to different degrees (1 mm, ¼ of the TM, ½ of the TM, and full ablation). The sound-induced velocity of the stapes footplate was measured using single-point laser-Doppler-vibrometry (LDV). The METF were correlated with a Finite Element (FE) model of the middle ear, in which similar alterations were simulated.
Results
The measured and calculated METF showed frequency and perforation size dependent losses at all perforation locations. Starting at low frequencies, the loss expanded to higher frequencies with increased perforation size. In direct comparison, posterior TM perforations affected the transmission properties to a larger degree than anterior perforations. The asymmetry of the TM causes the malleus-incus complex to rotate and results in larger deflections in the posterior TM quadrants than in the anterior TM quadrants. Simulations in the FE model with a sealed cavity show that small perforations lead to a decrease in TM rigidity and thus to an increase in oscillation amplitude of the TM mainly above 1 kHz.
Conclusion
Size and location of TM perforations have a characteristic influence on the METF. The correlation of the experimental LDV measurements with an FE model contributes to a better understanding of the pathologic mechanisms of middle-ear diseases. If small perforations with significant HL are observed in daily clinical practice, additional middle ear pathologies should be considered. Further investigations on the loss of TM pretension due to perforations may be informative.
The early detection of head and neck cancer is a prolonged challenging task. It requires a precise and accurate identification of tissue alterations as well as a distinct discrimination of cancerous from healthy tissue areas. A novel approach for this purpose uses microspectroscopic techniques with special focus on hyperspectral imaging (HSI) methods. Our proof-of-principle study presents the implementation and application of darkfield elastic light scattering spectroscopy (DF ELSS) as a non-destructive, high-resolution, and fast imaging modality to distinguish lingual healthy from altered tissue regions in a mouse model. The main aspect of our study deals with the comparison of two varying HSI detection principles, which are a point-by-point and line scanning imaging, and whether one might be more appropriate in differentiating several tissue types. Statistical models are formed by deploying a principal component analysis (PCA) with the Bayesian discriminant analysis (DA) on the elastic light scattering (ELS) spectra. Overall accuracy, sensitivity, and precision values of 98% are achieved for both models whereas the overall specificity results in 99%. An additional classification of model-unknown ELS spectra is performed. The predictions are verified with histopathological evaluations of identical HE-stained tissue areas to prove the model’s capability of tissue distinction. In the context of our proof-of-principle study, we assess the Pushbroom PCA-DA model to be more suitable for tissue type differentiations and thus tissue classification. In addition to the HE-examination in head and neck cancer diagnosis, the usage of HSI-based statistical models might be conceivable in a daily clinical routine.
Digitalisierung und Mediatisierung prägen die Gesellschaft und auch die Erwachsenenbildung/Weiterbildung. Der Beitrag geht der Frage nach, wie Digitalisierung in Angeboten der Erwachsenenbildung/Weiterbildung gelingt. Damit wird ein Fokus auf den Einsatz digitaler Medien gelegt. Dazu werden die Angebotsentwicklung für Adressatinnen und Adressaten sowie Teilnehmende, medienbezogene Inhalte, Lehr- und Lernarrangements mit digitalen Medien, der Einsatz digitaler Medien und die Zugänglichkeit von Lehr- und Lernmaterialien als relevante Merkmale identifiziert. Insgesamt zeigen die analysierten Interviewdaten, dass der Einsatz digitaler Medien in Angeboten eine Erweiterung der didaktischen Aufgaben darstellt, da Angebote mit digitalen Medien zielgenau auf die Bedarfe und Möglichkeiten von Adressatinnen und Adressaten sowie Teilnehmenden abgestimmt werden müssen.
The article analyzes experimentally and theoretically the influence of microscope parameters on the pinhole-assisted Raman depth profiles in uniform and composite refractive media. The main objective is the reliable mapping of deep sample regions. The easiest to interpret results are found with low magnification, low aperture, and small pinholes. Here, the intensities and shapes of the Raman signals are independent of the location of the emitter relative to the sample surface. Theoretically, the results can be well described with a simple analytical equation containing the axial depth resolution of the microscope and the position of the emitter. The lower determinable object size is limited to 2–4 μm. If sub-micrometer resolution is desired, high magnification, mostly combined with high aperture, becomes necessary. The signal intensities and shapes depend now in refractive media on the position relative to the sample surface. This aspect is investigated on a number of uniform and stacked polymer layers, 2–160 μm thick, with the best available transparency. The experimental depth profiles are numerically fitted with excellent accuracy by inserting a Gaussian excitation beam of variable waist and fill fraction through the focusing lens area, and by treating the Raman emission with geometric optics as spontaneous isotropic process through the lens and the variable pinhole, respectively. The intersectional area of these two solid angles yields the leading factor in understanding confocal (pinhole-assisted) Raman depth profiles.
Effektives Risiko-Management sollte neben quantifizierbaren, bekannten Risiken auch Ereignisse berücksichtigen, die entweder in ähnlicher Art bereits eingetreten oder grundsätzlich vorstellbar sind. Für eine Identifikation dieser "Grauen Schwäne" müssen institutionell-organisatorische Voraussetzungen geschaffen und analytisch-konzeptionelle Instrumente bereitgestellt werden.
Monday is unique for its reputation as a “bad” day—one that is characterized by pessimism and reluctance as noted by Rystrom and Benson (Financ Anal J 45(5):75–78, 1989). But the extent to which this applies to stock markets is still in dispute. While early evidence points to a Monday effect leading to negative returns, recent studies tend to suggest its disappearance or reversal.As a replication study, this paper searches for new evidence of this effect in the German stock market.We use data on the German blue-chip index DAX between 2000 and 2017 to test for the presence of a Monday effect by applying regression and controlling with GARCH analysis. The observation period provides a detailed insight into different market phases in one of the most liquid and information efficient international stock markets. Our results contribute no evidence to the persistent existence of a Monday effect on the German stock market. Our analysis is robust against the background of different market sentiments before, during and after the financial crisis.
Purpose: Gliomas are the most common and aggressive type of brain tumors due to their infiltrative nature and rapid progression. The process of distinguishing tumor boundaries from healthy cells is still a challenging task in the clinical routine. Fluid attenuated inversion recovery (FLAIR) MRI modality can provide the physician with information about tumor infiltration. Therefore, this paper proposes a new generic deep learning architecture, namely DeepSeg, for fully automated detection and segmentation of the brain lesion using FLAIR MRI data.
Methods: The developed DeepSeg is a modular decoupling framework. It consists of two connected core parts based on an encoding and decoding relationship. The encoder part is a convolutional neural network (CNN) responsible for spatial information extraction. The resulting semantic map is inserted into the decoder part to get the full-resolution probability map. Based on modified U-Net architecture, different CNN models such as residual neural network (ResNet), dense convolutional network (DenseNet), and NASNet have been utilized in this study.
Results: The proposed deep learning architectures have been successfully tested and evaluated on-line based on MRI datasets of brain tumor segmentation (BraTS 2019) challenge, including s336 cases as training data and 125 cases for validation data. The dice and Hausdorff distance scores of obtained segmentation results are about 0.81 to 0.84 and 9.8 to 19.7 correspondingly.
Conclusion: This study showed successful feasibility and comparative performance of applying different deep learning models in a new DeepSeg framework for automated brain tumor segmentation in FLAIR MR images. The proposed DeepSeg is open source and freely available at https://github.com/razeineldin/DeepSeg/.
The critical process parameters cell density and viability during mammalian cell cultivation are assessed by UV/VIS spectroscopy in combination with multivariate data analytical methods. This direct optical detection technique uses a commercial optical probe to acquire spectra in a label-free way without signal enhancement. For the cultivation, an inverse cultivation protocol is applied, which simulates the exponential growth phase by exponentially replacing cells and metabolites of a growing Chinese hamster ovary cell batch with fresh medium. For the simulation of the death phase, a batch of growing cells is progressively replaced by a batch with completely starved cells. Thus, the most important parts of an industrial batch cultivation are easily imitated. The cell viability was determined by the well-established method partial least squares regression (PLS). To further improve process knowledge, the viability has been determined from the spectra based on a multivariate curve resolution (MCR) model. With this approach, the progress of the cultivations can be continuously monitored solely based on an UV/VIS sensor. Thus, the monitoring of critical process parameters is possible inline within a mammalian cell cultivation process, especially the viable cell density. In addition, the beginning of cell death can be detected by this method which allows us to determine the cell viability with acceptable error. The combination of inline UV/VIS spectroscopy with multivariate curve resolution generates additional process knowledge complementary to PLS and is considered a suitable process analytical tool for monitoring industrial cultivation processes.
Software evolvability is an important quality attribute, yet one difficult to grasp. A certain base level of it is allegedly provided by service- and microservice-based systems, but many software professionals lack systematic understanding of the reasons and preconditions for this. We address this issue via the proxy of architectural modifiability tactics. By qualitatively mapping principles and patterns of Service Oriented Architecture (SOA) and microservices onto tactics and analyzing the results, we cannot only generate insights into service-oriented evolution qualities, but can also provide a modifiability comparison of the two popular service-based architectural styles. The results suggest that both SOA and microservices possess several inherent qualities beneficial for software evolution. While both focus strongly on loose coupling and encapsulation, there are also differences in the way they strive for modifiability (e.g. governance vs. evolutionary design). To leverage the insights of this research, however, it is necessary to find practical ways to incorporate the results as guidance into the software development process.
Artefaktkorrektur und verfeinerte Metriken für ein EEG-basiertes System zur Müdigkeitserkennung
(2019)
Fragestellung: Müdigkeit ist ein oft unterschätztes, aber dennoch großes Problem im Straßenverkehr. Von rund 2,5 Mio. Verkehrsunfällen 2015 in Deutschland, waren 2898 Unfälle, mit insgesamt 59 Toten (~1,7 % der Todesfälle), auf Übermüdung zurückzuführen. Schätzungen gehen von einer Dunkelziffer von bis zu 20 % aus. In einer ersten eigenen Studie wurde überprüft, ob ein mobiles EEG in einem Fahrsimulator Müdigkeitszustände zuverlässig erkennen kann. Die Erkennungsrate lag lediglich bei 61 %. Ziel dieser Arbeit ist, das verwendete Messsystem zu verbessern. Dazu wird die Genauigkeit durch eine Artefaktkorrektur und mit Hilfe von verfeinerten Qualitätsmetriken erhöht. Eine erkannte Übermüdung wird dem Fahrer dann in angemessener Weise angezeigt, so dass er entsprechend reagieren kann.
Patienten und Methoden: Die Independent Component Analysis (ICA) ist ein multivariates Verfahren, um mehrere Zufallsvariablen zu analysieren. Für die Entscheidung, ob ein Fahrer gerade müde oder wach ist, wird der erstellte Merkmalsvektor für jede Sequenz mit ICA klassifiziert. Dafür wird ein trainierter Machine-Learning-Algorithmus eingesetzt, der in der Lage ist, auch unbekannte Datensätze in Klassen einzuteilen. Um die benötigten Frequenzwerte zu erhalten, wurde für jeden EEG-Kanal eine Fourier Transformation durchgeführt. Der erstellte Merkmalsvektor wird im nächsten Schritt durch ein Künstliches Neuronales Netz klassifiziert. Für das Training werden vorab erstellte Merkmalsvektoren mit den Klassen „Wach“ und „Müde“ versehen. Diese Daten werden zufällig gemischt und im Verhältnis 2:1 in eine Trainings- und Testmenge geteilt. Das Experiment wurde mit acht Personen mit jeweils zweimal 45 min Testfahrt durchgeführt.
Ergebnisse: Der komplette Datensatz besteht aus 150.000 Signalwerten, welche zu ca. 7000 Sequenzen zusammengefasst werden. Durch die Anwendung der Qualitätsmetrik bleiben 4370 Sequenzen für das Training übrig. Bei invaliden Sequenzen aufgrund von EEG-Artefakten gibt es deutliche Unterschiede. Im „Wach“ Zustand werden dreimal so viele Sequenzen verworfen als im „Müde“ Zustand. Insgesamt werden bei wachen Probanden im Schnitt ca. 50 % der Sequenzen verworfen, bei Müden lediglich 25 %. Im Durchschnitt erreicht das System eine Erkennungsrate von 73 % für beide Zustände. Vergleicht man nun das Verhältnis von „Wach“ und „Müde“ und lässt „Leichte Müdigkeit“ außen vor, liegen die Ergebnisse bei über 90 %.
Schlussfolgerungen: Die Ergebnisse zeigen, dass die Aufmerksamkeit während des Experiments abnimmt bzw. die Müdigkeit zunimmt. Dies verdeutlichen zum einen subjektive und objektive Beobachtungen von Müdigkeitsanzeichen. Zum anderen lassen sich messbare und klassifizierbare Unterschiede im EEG Signal nachweisen. Die als Merkmale eingesetzten Theta-Wellen zeigten eine niedrigere Amplitude gegen Ende des Experiments. Die Erweiterung der binären Klassifizierung führt zu einer weiteren Stabilisierung der Ergebnisse. Artefaktkorrektur und Qualitätsmetriken steigern die Güte der Daten weiter. Die entwickelte Anwendung zur Müdigkeitserkennung ermittelt messbare Zeichen von Müdigkeit und kann eine gute Entscheidung über die Fahrtauglichkeit treffen.
Parallel applications are the computational backbone of major industry trends and grand challenges in science. Whereas these applications are typically constructed for dedicated High Performance Computing clusters and supercomputers, the cloud emerges as attractive execution environment, which provides on-demand resource provisioning and a pay-per-use model. However, cloud environments require specific application properties that may restrict parallel application design. As a result, design trade-offs are required to simultaneously maximize parallel performance and benefit from cloud-specific characteristics.
In this paper, we present a novel approach to assess the cloud readiness of parallel applications based on the design decisions made. By discovering and understanding the implications of these parallel design decisions on an application’s cloud readiness, our approach supports the migration of parallel applications to the cloud.We introduce an assessment procedure, its underlying meta model, and a corresponding instantiation to structure this multi-dimensional design space. For evaluation purposes, we present an extensive case study comprising three parallel applications and discuss their cloud readiness based on our approach.
Standardisation of breath sampling is important for application of breath analysis in clinical settings. By studying the effect of room airing on indoor and breath analytes and by generating time series of room air with different sampling intervals we sought to get further insights into room air metabolism, to detect the relevance of exogenous VOCs and to make conclusions about their consideration for the interpretation of exhaled breath. Room air and exhaled breath of a healthy subject were analysed before and after room airing. Furthermore a time series of room air with doors and windows closed was taken over 84 h by an automatic sampling every 180 min. A second times series studied room air analytes over 70 h with samples taken every 16.5 min. For breath and room air measurements an IMS coupled to a multi-capillary column (IMS/MCC) [Bio-Scout® - B&S Analytik GmbH, Dortmund, Germany] was used. The peaks were characterized using the Software Visual Now (B&S Analytik, Dortmund Germany) and identified using the software package MIMA (version 1.1, provided by the Max Planck Institute for Informatics, Saarbrücken, Germany) and the database 20160426_SubstanzDbNIST_122 (B & S Analytik GmbH, Dortmund, Germany). In the morning 4 analytes (Decamethylcylopentasiloxane [541-02-6]; Pentan-2-one [107-87-9] – Dimer; Hexan-1-al [66-25-1]; Pentan-2-one [107-87-9]) – Monomer showed high intensities in the room air and exhaled breath. They were significantly but not equally reduced by room airing. The time series about 84 h showed a time dependent decrease of analytes (limonen-monomer and -dimer; Decamethylcylopentasiloxane, Butan-1-ol, Butan-1-ol) as well as increase (Pentan-2-one [107-87-9] – Dimer). Shorter sampling intervals exhibited circadian variations of analyte concentrations for many analytes. Breath sampling in the morning needs room airing before starting. Then the variation of the intensity of indoor analytes can be kept small. The time series of indoor analytes show, that their intensities have a different behaviour, with time dependent declines, constant increases and circadian variations, dependent on room airing. This has implications on the breath sampling procedure and the intrepretation of exhaled breath.
Exogenous factors of influence on exhaled breath analysis by ion-mobility spectrometry (MCC/IMS)
(2019)
The interpretation of exhaled breath analysis needs to address to the influence of exogenous factors, especially to a transfer of confounding analytes by the test persons. A test person who was exposed to a disinfectant had exhaled breath analysis by MCC/IMS (Bioscout®) after different time intervals. Additionally, a new sampling method with inhalation of synthetic air before breath analysis was tested. After exposure to the disinfectant, 3-Pentanone monomer, 3-Pentanone dimer, Hexanal, 3-Pentanone trimer, 2-Propanamine, 1-Propanol, Benzene, Nonanal showed significantly higher intensities, in exhaled breath and air of the examination room, compared to the corresponding baseline measurements. Only one ingredient of the disinfectant (1-Propanol) was identical to the 8 analytes. Prolonging the time intervals between exposure and breath analysis showed a decrease of their intensities. However, the half-time of the decrease was different. The inhalation of synthetic air - more than consequently airing the examination room with fresh air - reduced the exogenous and also relevant endogenous analytes, leading to a reduction and even changing polarity of the alveolar gradient. The interpretation of exhaled breath needs further knowledge about the former residence of the proband and the likelihood and relevance of the inhalation of local, site-specific and confounding exogenous analytes by him. Their inhalation facilitates a transfer to the examination room and a detection of high concentrations in room air and exhaled breath, but also the exhalation of new analytes. This may lead to a misinterpretation of these analytes as endogenous resp. disease-specific ones.
Container virtualization evolved into a key technology for deployment automation in line with the DevOps paradigm. Whereas container management systems facilitate the deployment of cloud applications by employing container based artifacts, parts of the deployment logic have been applied before to build these artifacts. Current approaches do not integrate these two deployment phases in a comprehensive manner. Limited knowledge on application software and middleware encapsulated in container-based artifacts leads to maintainability and configuration issues. Besides, the deployment of cloud applications is based on custom orchestration solutions leading to lock in problems. In this paper, we propose a two-phase deployment method based on the TOSCA standard. We present integration concepts for TOSCA-based orchestration and deployment automation using container-based artifacts. Our two-phase deployment method enables capturing and aligning all the deployment logic related to a software release leading to better maintainability. Furthermore, we build a container management system, which is composed of a TOSCA-based orchestrator on Apache Mesos, to deploy container-based cloud applications automatically.
Back to the future: origins and directions of the “Agile Manifesto” – views of the originators
(2018)
In 2001, seventeen professionals set up the manifesto for agile software development. They wanted to define values and basic principles for better software development. On top of brought into focus, the manifesto has been widely adopted by developers, in software-developing organizations and outside the world of IT. Agile principles and their implementation in practice have paved the way for radical new and innovative ways of software and product development. In parallel, the understanding of the manifesto’s underlying principles evolved over time. This, in turn, may affect current and future applications of agile principles. This article presents results from a survey and an interview study in collaboration with the original contributors of the manifesto for agile software development. Furthermore, it comprises the results from a workshop with one of the original authors. This publication focuses on the origins of the manifesto, the contributors’ views from today’s perspective, and their outlook on future directions. We evaluated 11 responses from the survey and 14 interviews to understand the viewpoint of the contributors. They emphasize that agile methods need to be carefully selected and agile should not be seen as a silver bullet. They underline the importance of considering the variety of different practices and methods that had an influence on the manifesto. Furthermore, they mention that people should question their current understanding of "agile" and recommend reconsidering the core ideas of the manifesto.
The focus of the developed maturity model was set on processes. The concept of the widespread CMM and its practices has been transferred to the perioperative domain and the concept of the new maturity model. Additional optimization goals and technological as well as networking-specific aspects enable a process- and object-focused view of the maturity model in order to ensure broad coverage of different subareas. The evaluation showed that the model is applicable to the perioperative field. Adjustments and extensions of the maturity model are future steps to improve the rating and classification of the new maturity model.
High quality decorative laminate panels typically consist of two major types of components: the surface layers comprising décor and overlay papers that are impregnated with melamine-based resins, and the core which is made of stacks of kraft papers impregnated with phenolic (PF) resin. The PF-impregnated layers impart superior hydrolytic stability, mechanical strength and fire-resistance to the composite. The manufacturing involves the complex interplay between resin, paper and impregnation/drying processes. Changes in the input variables cause significant alterations in the process characteristics and adaptations of the used materials and specific process conditions may, in turn, be required. This review summarizes the main variables influencing both processability and technological properties of phenolic resin impregnated papers and laminates produced therefrom. It is aimed at presenting the main influences from the involved components (resin and paper), how these may be controlled during the respective process steps (resin preparation and paper production), how they influence the impregnation and lamination conditions, how they affect specific aspects of paper and laminate performance, and how they interact with each other
(synergies).
This article provides a general overview of the most promising candidates of bio based materials and deals with the most important issues when it comes to their incorporation into PF resins. Due to their abundance on Earth, much knowledge of lignin-based materials has already been gained and uses of lignin in PF resins have been studied for many decades. Other natural polyphenols that are less frequently considered for impregnation are covered as well, as they do also possess some potential for PF substitution.
To evaluate the quality of sleep, it is important to determine how much time was spent in each sleep stage during the night. The gold standard in this domain is an overnight polysomnography (PSG). But the recording of the necessary electrophysiological signals is extensive and complex and the environment of the sleep laboratory, which is unfamiliar to the patient, might lead to distorted results. In this paper, a sleep stage detection algorithm is proposed that uses only the heart rate signal, derived from electrocardiogram (ECG), as a discriminator. This would make it possible for sleep analysis to be performed at home, saving a lot of effort and money. From the heart rate, using the fast Fourier transformation (FFT), three parameters were calculated in order to distinguish between the different sleep stages. ECG data along with a hypnogram scored by professionals was used from Physionet database, making it easy to compare the results. With an agreement rate of 41.3%, this approach is a good foundation for future research.
In this paper a method for the generation of gSPM with ontology-based generalization was presented. The resulting gSPM was modeled with BPMN/BPMNsix in an efficient way and could be executed with BPMN workflow engines. In the next step the implementation of resource concepts, anatomical structures, and transition probabilities for workflow execution will be realized.
This paper studies whether a monetary union can be managed solely by a rule based approach. The Five Presidents’ Report of the European Union rejects this idea. It suggests a centralisation of powers. We analyse the philosophy of policy rules from the vantage point of the German economic school of thought. There is evidence that a monetary union consisting of sovereign states is well organised by rules, together with the principle of subsidiarity. The root cause of the euro crisis is rather the weak enforcement of rules, compounded by structural problems. Therefore, we suggest a genuine rule-based paradigm for a stable future of the Economic and Monetary Union.
Die weiterhin hohen Schulden in einigen Staaten der Europäischen Wirtschafts- und Währungsunion lassen nach wie vor staatliche Insolvenzen befürchten. Um die entstandenen Probleme zu bewältigen, aber auch damit eine solche Situation erst gar nicht eintritt, hält der Autor eine staatliche Insovenzordnung – mit Bail-out durch die anderen Mitgliedstaaten nur in Notfällen – für erforderlich. Er schlägt einen staatlichen Abwicklungsmechanismus für überschuldete Euro-Länder vor, der auf einem Konzept des Sachverständigenrates für Wirtschaft von 2016 beruht.
This paper presents an approach for label-free brain tumor tissue typing. For this application, our dual modality microspectroscopy system combines inelastic Raman scattering spectroscopy and Mie elastic light scattering spectroscopy. The system enables marker-free biomedical diagnostics and records both the chemical and morphologic changes of tissues on a cellular and subcellular level. The system setup is described and the suitability for measuring morphologic features is investigated.
Purpose: Human breath analysis is proposed with increasing frequency as a useful tool in clinical application. We performed this study to find the characteristic volatile organic compounds (VOCs) in the exhaled breath of patients with idiopathic pulmonary fibrosis (IPF) for discrimination from healthy subjects. Methods: VOCs in the exhaled breath of 40 IPF patients and 55 healthy controls were measured using a multi-capillary column and ion mobility spectrometer. The patients were examined by pulmonary function tests, blood gas analysis, and serum biomarkers of interstitial pneumonia. Results: We detected 85 VOC peaks in the exhaled breath of IPF patients and controls. IPF patients showed 5 significant VOC peaks; p-cymene, acetoin, isoprene, ethylbenzene, and an unknown compound. The VOC peak of p-cymene was significantly lower (p < 0.001), while the VOC peaks of acetoin, isoprene, ethylbenzene, and the unknown compound were significantly higher (p < 0.001 for all) compared with the peaks of controls. Comparing VOC peaks with clinical parameters, negative correlations with VC (r =−0.393, p = 0.013), %VC (r =−0.569, p < 0.001), FVC (r = −0.440, p = 0.004), %FVC (r =−0.539, p < 0.001), DLco (r =−0.394, p = 0.018), and %DLco (r =−0.413, p = 0.008) and a positive correlation with KL-6 (r = 0.432, p = 0.005) were found for p-cymene. Conclusion: We found characteristic 5 VOCs in the exhaled breath of IPF patients. Among them, the VOC peaks of p-cymene were related to the clinical parameters of IPF. These VOCs may be useful biomarkers of IPF.
Newly developed active pharmaceutical ingredients (APIs) are often poorly soluble in water. As a result the bioavailability of the API in the human body is reduced. One approach to overcome this restriction is the formulation of amorphous solid dispersions (ASDs), e.g., by hot-melt extrusion (HME). Thus, the poorly soluble crystalline form of the API is transferred into a more soluble amorphous form. To reach this aim in HME, the APIs are embedded in a polymer matrix. The resulting amorphous solid dispersions may contain small amounts of residual crystallinity and have the tendency to recrystallize. For the controlled release of the API in the final drug product the amount of crystallinity has to be known. This review assesses the available analytical methods that have been recently used for the characterization of ASDs
and the quantification of crystalline API content. Well established techniques like near- and mid-infrared spectroscopy (NIR and MIR, respectively), Raman spectroscopy, and emerging ones like UV/VIS, terahertz, and ultrasonic spectroscopy are considered in detail. Furthermore, their advantages and limitations are discussed with regard to general practical applicability as process analytical technology (PAT) tools in industrial manufacturing. The review focuses on spectroscopic methods which have been proven as most suitable for in-line and on-line process analytics. Further aspects are spectroscopic techniques that have been or could be integrated into an extruder.
EBIT & Co.
(2017)
Eine ganze Reihe von Kennzahlen wird in der Betriebswirtschaftslehre zur Ermittlung und Steuerung des Unternehmensgewinns verwendet. Doch nicht alle eignen sich für denselben Zweck. Je nach Fragestellung sollten unterschiedliche Kennzahlen herangezogen werden. Ihre Interpretation muss nicht zuletzt auch branchenspezifisch erfolgen.
The influence of turbidity on the Raman signal strengths of condensed matter is theoretically analyzed and measured with laboratory - scale equipment for remote sensing. The results show the quantitative dependence of back- and forward-scattered signals on the thickness and elastic-scattering properties of matter. In the extreme situation of thin, highly turbid layers, the measured Raman signal strengths exceed their transparent analogs by more than a factor of ten. The opposite behavior is found for thick layers of low turbidity, where the presence of a small amount of scatterers leads to a decrease of the measured signal. The wide range of turbidities appearing in nature is experimentally realized with stacked polymer layers and solid/liquid dispersions, and theoretically modeled by the equation of radiative transfer using the analytical diffusion approximation or random walk simulations.
Eine realistische Risikoeinschätzung ist Basis von verantwortungsvollen Unternehmensentscheidungen. Doch wie lassen sich Risiken richtig einschätzen? Verschiedene Instrumente des Risiko-Managements erlauben es, Risiken systematisch zu identifizieren, zu quantifizieren, zu bewerten und zu dokumentieren.
Risiken sind per se nichts Schlechtes, wenn der dadurch erzielte Ertrag für das eingegangene Risiko angemessen ist. Dieser Zusammenhang wird allerdings nicht immer verstanden – einer der Gründe für die Finanzkrise von 2008/09. Die in diesem Beitrag vorgestellten Kennzahlen zeigen, wie man Risiken mit erzielten oder möglichen Erträgen ins Verhältnis setzen kann.
Wer in ein Unternehmen investiert, tut dies, um in Zukunft Geld zu verdienen. Er rechnet mit einer risikoadäquaten Rendite. Die Auswahl der Kennzahlen, die diese Wertsteigerung transparent machen, ist allerdings nicht trivial. Denn von ihnen hängt ab, ob die Unternehmensziele richtig vorgegeben und ob die Anreize für das Management richtig gesetzt werden.
Wege der Gewinnermittlung
(2017)
Macht ein Unternehmen Gewinn, heißt dies nicht notwendigerweise, dass alles „in trockenen Tüchern“ ist. Die entscheidende Frage ist, wie der Gewinn ermittelt wurde, denn nur mit dem richtigen Verfahren erhält man auch den geeigneten Blickwinkel – auf den Erfolg eines einzelnen Geschäfts, auf den Gewinn einer Periode, auf das Betriebsvermögen, auf die Liquidität oder auf die Bilanz.
Umsatz und Gewinne stagnieren auf hohem Niveau, und dennoch steigen der Aktienkurs und der Gewinn pro Aktie – eine Entwicklung, die sich etwa bei Apple oder Ebay beobachten lässt. Aktionäre sollten wissen, welche Arithmetik sich hinter solchen Entwicklungen verbirgt und mit welchen Verfahren sie den Unternehmenswert am besten ermitteln können.
Current techniques for chromosome analysis need to be improved for rapid, economical identification of complex chromosomal defects by sensitive and selective visualisation. In this paper, we present a straightforward method for characterising unstained human metaphase chromosomes. Backscatter imaging in a dark-field setup combined with visible and short near-infrared spectroscopy is used to monitor morphological differences in the distribution of the chromosomal fine structure in human metaphase chromosomes. The reasons for the scattering centres in the fine structure are explained. Changes in the scattering centres during preparation of the metaphases are discussed. FDTD simulations are presented to substantiate the experimental findings. We show that local scattering features consisting of underlying spectral modulations of higher frequencies associated with a high variety of densely packed chromatin can be represented by their scatter profiles even on a sub-microscopic level. The result is independent of the chromosome preparation and structure size. This analytical method constitutes a rapid, costeffective and label-free cytogenetic technique which can be used in a standard light microscope.
Eine gut funktionierende Logistik ist ein wichtiger Wettbewerbsfaktor. Um ihren Beitrag zum Unternehmenserfolg ermitteln zu können, müssen ihre Kosten aber bestimmbar sein. Daran hapert es häufig. Dabei gibt es Ansätze, um Logistikkosten von anderen Kosten abzugrenzen. Unternehmen müssen nur konkrete Regeln für ihren Einsatz berücksichtigen.
Fremdkapital ist aktuell „billig“, doch die Investitionstätigkeit von Unternehmen bleibt zurückhaltend. Wer investieren möchte, muss in erster Linie die Höhe der Kapitalkosten berücksichtigen, die im Gegensatz zu den Zinsen nur leicht gesunken sind. Controller brauchen geeignete Ansätze, um zukünftige Kapitalkosten in Investitionsentscheidungen einzubeziehen.
Kennzahlen zur Liquidität
(2016)
IOS 2.0 : new aspects on inter-organizational integration through enterprise 2.0 technologies
(2015)
This special theme of „Electronic Markets“ focuses on research concerned with the use of social technologies and "2.0" principles in the interaction between organization (i.e., with "inter-organizational systems (IOS) 2.0"). This theme falls within the larger space of Enterprise 2.0 research, but focuses in particular on inter-organizational use (between enterprises), not intra-organizational use (in a single enterprise). While there is great interest in practice regarding the use of 2.0 technologies to support intra-organizational communication, collaboration and interaction, information systems (IS) research has largely been oblivious to this important use of social technologies.
Sunlight has various effects on human health. Several important metabolic processes are only enabled by sunlight. But longtime sun bathing and extended outdoor activities can cause skin irritation, inflammation or even skin cancer due to high radiation dose. We developed in vitro skin models of different complexity to investigate UV-light associated skin damage. Substances and their phototoxic, sun protective or photo-sensitizing potential can be analyzed to prevent white skin cancer.
Engineering of large vascularized adipose tissue constructs is still a challenge for the treatment of extensive high-graded burns or the replacement of tissue after tumor removal. Communication between mature adipocytes and endothelial cells is important for homeostasis and the maintenance of adipose tissue mass but, to date, is mainly neglected in tissue engineering strategies. Thus, new coculture strategies are needed to integrate adipocytes and endothelial cells successfully into a functional construct. This review focuses on the cross-talk of mature adipocytes and endothelial cells and considers their influence on fatty acid metabolism and vascular tone. In addition, the properties and challenges with regard to these two cell types for vascularized tissue engineering are highlighted.
The analysis of exhaled metabolites has become a promising field of research in recent decades. Several volatile organic compounds reflecting metabolic disturbance and nutrition status have even been reported. These are particularly important for long-term measurements, as needed in medical research for detection of disease progression and therapeutic efficacy. In this context, it has become urgent to investigate the effect of fasting and glucose treatment for breath analysis. In the present study, we used amodel of ventilated rats that fasted for 12 h prior to the experiment. Ten rats per group were randomly assigned for continuous intravenous infusion without glucose or an infusion including 25 mg glucose per 100 g per hour during an observation period of 12 h. Exhaled gas was analysed using multicapillary column ion-mobility spectrometry. Analytes were identified by the BS-MCC/IMS database (version 1209; B & S Analytik, Dortmund, Germany). Glucose infusion led to a significant increase in blood glucose levels (p<0.05 at 4 h and thereafter) and cardiac output (p<0.05 at 4 h and thereafter). During the observation period, 39 peaks were found collectively. There were significant differences between groups in the concentration of ten volatile organic compounds: p<0.001 at 4 h and thereafter for isoprene, cyclohexanone, acetone, p-cymol, 2-hexanone, phenylacetylene, and one unknown compound, and p<0.001 at 8 h and thereafter for 1-pentanol, 1-propanol, and 2-heptanol. Our results indicate that for long-term measurement, fasting and the withholding of glucose could contribute to changes of volatile metabolites in exhaled air.
The capability of the method of Immersion transmission ellipsometry (ITE) (Jung et al. Int Patent WO, 2004/109260) to not only determine three-dimensional refractive indices in anisotropic thin films (which was already possible in the past), but even their gradients along the z-direction (perpendicular to the film plane) is investigated in this paper. It is shown that the determination of orientation gradients in deep-sub-lm films becomes possible by applying ITE in combination with reflection ellipsometry. The technique is supplemented by atomic force microscopy for measuring the film thickness. For a photooriented thin film, no gradient was found, as expected. For a photo-oriented film, which was subsequently annealed in a nematic liquid crystalline phase, an order was found similar to the one applied in vertically aligned nematic displays, with a tilt angle varying along the z-direction. For fresh films, gradients were only detected for the refractive index perpendicular to the film plane, as expected.
Stent graft visualization and planning tool for endovascular surgery using finite element analysis
(2014)
Purpose: A new approach to optimize stent graft selection for endovascular aortic repair is the use of finite element analysis. Once the finite element model is created and solved, a software module is needed to view the simulation results in the clinical work environment. A new tool for Interpretation of simulation results, named Medical Postprocessor, that enables comparison of different stent graft configurations and products was designed, implemented and tested. Methods Aortic endovascular stent graft ring forces and sealing states in the vessel landing zone of three different configurations were provided in a surgical planning software using the Medical Imaging Interaction Tool Kit (MITK) Software system. For data interpretation, software modules for 2D and 3D presentations were implemented. Ten surgeons evaluated the software features of the Medical Postprocessor. These surgeons performed usability tests and answered questionnaires based on their experience with the system.
Results: The Medical Postprocessor visualization system enabled vascular surgeons to determine the configuration with the highest overall fixation force in 16 ± 6 s, best proximal sealing in 56±24 s and highest proximal fixation force in 38 ± 12 s. The majority considered the multiformat data provided helpful and found the Medical Postprocessor to be an efficient decision support system for stent graft selection. The evaluation of the user interface results in an ISONORMconform user interface (113.5 points).
Conclusion: The Medical Postprocessor visualization Software tool for analyzing stent graft properties was evaluated by vascular surgeons. The results show that the software can assist the interpretation of simulation results to optimize stent graft configuration and sizing.
