Refine
Document Type
- Conference proceeding (849) (remove)
Language
- English (849) (remove)
Is part of the Bibliography
- yes (849) (remove)
Institute
- Informatik (461)
- Technik (220)
- ESB Business School (137)
- Texoversum (21)
- Life Sciences (11)
- Zentrale Einrichtungen (2)
Publisher
- IEEE (222)
- Springer (137)
- Gesellschaft für Informatik (42)
- ACM (38)
- Hochschule Reutlingen (31)
- Association for Information Systems (AIS) (30)
- IARIA (19)
- SSRN (18)
- SCITEPRESS (14)
- VDE Verlag GmbH (14)
As fuel prices climb and the global automotive sector migrates to more sustainable vehicle technologies, the future of South Africa’s minibus taxis is in flux. The authors’ previous research has found that battery electric technology struggles to meet all the mobility requirements of minibus taxis. They investigate the technical feasibility of powering taxis with hydrogen fuel cells instead. The following results are projected using a custom-built simulator, and tracking data of taxis based in Stellenbosch, South Africa. Each taxi requires around 12 kg of hydrogen gas per day to travel an average distance of 360 km. 465 kWh of electricity, or 860 m2 of solar panels, would electrolyse the required green hydrogen. An economic analysis was conducted on the capital and operational expenses of a system of ten hydrogen taxis and an electrolysis plant. Such a pilot project requires a minimum investment of € 3.8 million (R 75 million), for a 20 year period. Although such a small scale roll-out is technically feasible and would meet taxis’ performance requirements, the investment cost is too high, making it financially unfeasible. They conclude that a large scale solution would need to be investigated to improve financial feasibility; however, South Africa’s limited electrical generation capacity poses a threat to its technical feasibility. The simulator is uploaded at: https://gitlab.com/eputs/ev-fleet-sim-fcv-model.
This study is about estimating the reproducibility of finding palpation points of three different anatomical landmarks in the human body (Xiphoid Process and the 2 Hip Crests) to support a navigated ultrasound application. On 6 test subjects with different body mass index the three palpation points were located five times by two examiners. The deviation from the target position was calculated and correlated to the fat thickness above each palpation point. The reproducibility of the measurements had a mean error of ≈13.5 mm +- 4 mm, which seems to be sufficient for the desired application field.
Most Question-answering (QA) systems rely on training data to reach their optimal performance. However, acquiring training data for supervised systems is both time-consuming and resource-intensive. To address this, in this paper, we propose TFCSG, an unsupervised similar question retrieval approach that leverages pre-trained language models and multi-task learning. Firstly, topic keywords in question sentences are extracted sequentially based on a latent topic-filtering algorithm to construct unsupervised training corpus data. Then, the multi-task learning method is used to build the question retrieval model. There are three tasks designed. The first is a short sentence contrastive learning task. The second is the question sentence and its corresponding topic sequence similarity judgment task. The third is using question sentences to generate their corresponding topic sequence task. The three tasks are used to train the language model in parallel. Finally, similar questions are obtained by calculating the cosine similarity between sentence vectors. The comparison experiment on public question datasets that TFCSG outperforms the comparative unsupervised baseline method. And there is no need for manual marking, which greatly saves human resources.
While there has been increased digitization of private homes, only little has been done to understand these specific home technologies, how they serve consumers, among other issues. “Smart home technology” (SHT) refer to a wide range of artifacts from cleaning aids to energy advisors. Given this breadth, clarity surrounding the key characteristics and the multi-faceted impact of SHT is needed to conduct more directed research on SHT. We propose a taxonomy to help outline the salient intended outcomes of SHT. Through a process involving five iterations, we analyzed and classified 79 technologies (gathered from literature and industry reports). This uncovered seven dimensions encompassing 20 salient characteristics. We believe these dimensions/characteristics will help researchers and organizations better design and study the impacts of these technologies. Our long-term agenda is to use the proposed taxonomy for an exploratory inquiry to understand tensions occurring when personal and sustainability-related outcomes compete.
In times of climate change and growing urbanization, the way food is produced and consumed also changes. Meanwhile, digitization is transforming farming practices, which also applies to the domestic growing of crops. More and more so-called smart home farms (SHF) are finding their way into private households. This paper conceptualizes the unique nature of enabled smart services and their underlying technology. Following an inductive interpretive approach, this study explores the antecedents of smart home farming practices. Our sample consists of eleven actual smart home farmers. We found six constructs to be of salient importance: expected outcomes related to harvesting, positive feelings, and sustainability; a combination of one's affinity for green and novel technologies; and the smartness and visibility of the enabled services. In the outlook, we present some preliminary thoughts for testing our qualitative findings.
The proliferation of smart technologies transforms the way individual consumers perform tasks. Considerable research alludes that smart technologies are often related to domestic energy consumption. However, it remains unclear how such technologies transform tasks and thereby impact our planet. We explore the role of technological smartness in personal day-to-day tasks that help create a more sustainable future. In the absence of theory, but facing extensive changes in everyday life enabled by smart technologies, we draw on phenomenon-based theorizing (PBT) guidelines. As anchor, we refer to task endogeneity related to task-technology fit theory (TTF). As infusion, we employ theory on public goods. Our model proposes novel relations between the concepts of smart autonomy and -transparency with sustainable task outcomes, mediated by task convenience and task significance. We discuss some implications, limitations, and future research opportunities.
Facing ever-looming climate change, studying the drivers for individuals' Information Systems (IS) Use to reduce environmental harm gains momentum. While extant research on the antecedents of sustainable IS Use has focused on specific theories, interventions, contexts, and technologies, a holistic understanding has become increasingly elusive, with a synthesis remaining absent. We employ a systematic literature review methodology to shed light on the driving antecedents for sustainable IS Use among individual consumers. Our results build on findings of 29 empirical studies drawn from 598 articles retrieved from our premier outlets and a forward/backward search. The analysis reveals six salient complementary antecedents: Relief, Empowerment, Default, User-centricity, Salience, and Encouragement. We recommend considering these concepts when developing, deploying, promoting, or regulating digital technologies to mitigate individual consumers' emissions. Along with memorable and implementable concepts, our theoretical framework offers a novel conceptualization and four promising avenues for researchers on sustainable IS Use.
The early involvement of experiences gained through intelligence and data analysis is becoming increasingly important in order to develop new products, leading to a completely different conception of product creation, development and engineering processes using the advantages that the dedication of the digital twin entails. Introducing a novel stage gate process in order to be holistically anchored in learning factories adopting idea generation and idea screening in an early stage, beta testing of first prototypes, technical implementation in real production scenarios, business analysis, market evaluation, pricing, service models as well as innovative social media portals. Corresponding product modelling in the sense of sustainability, circular economy, and data analytics forecasts the product on the market both before and after market launch with the interlinking of data interpretation nearby in real-time. The digital twin represents the link between the digital model and the digital shadow. Additionally, the connection of the digital twin with the product provides constantly updated operating status and process data as well as mapping of technical properties and real-world behaviours. A future-networking product, by embedded information technology with the ability to initiate and carry out one's own further development, is able to interact with people and environments and thus is relevant to the way of life of future generations. In today's development work for this new product creation approach, on one hand, "Werk150" is the object of the development itself and on the other hand the validation environment. In the next step, new learning modules and scenarios for trainings at master level will be derived from these findings.
Sleep analysis using a Polysomnography system is difficult and expensive. That is why we suggest a non-invasive and unobtrusive measurement. Very few people want the cables or devices attached to their bodies during sleep. The proposed approach is to implement a monitoring system, so the subject is not bothered. As a result, the idea is a non-invasive monitoring system based on detecting pressure distribution. This system should be able to measure the pressure differences that occur during a single heartbeat and during breathing through the mattress. The system consists of two blocks signal acquisition and signal processing. This whole technology should be economical to be affordable enough for every user. As a result, preprocessed data is obtained for further detailed analysis using different filters for heartbeat and respiration detection. In the initial stage of filtration, Butterworth filters are used.
In the powder coating of veneered particle boards the highly reactive hybrid epoxy/polyester powder transparent Drylac 530 Series from TIGER Coatings GmbH & Co. KG, Wels, Austria was used. Curing is accelerated by a mixture of catalysts reaching curing times of 3 min at 150 °C or 5 min at 135 °C which allows for energy and time savings making Drylac Series 530 powder suitable for the coating of temperaturesensitive substrates such as MDF and wood.
Theoretical foundation, effectiveness, and design artefact for machine learning service repositories
(2022)
Machine learning (ML) has played an important role in research in recent years. For companies that want to use ML, finding the algorithms and models that fit for their business is tedious. A review of the available literature on this problem indicates only a few research papers. Given this gap, the aim of this paper is to design an effective and easy-to-use ML service repository. The corresponding research is based on a multi-vocal literature analysis combined with design science research, addressing three research questions: (1) How is current white and gray literature on ML services structured with respect to repositories? (2) Which features are relevant for an effective ML service repository? (3) How is a prototype for an effective ML service repository conceptualized? Findings are relevant for the explanation of user acceptance of ML repositories. This is essential for corporate practice in order to create and use ML repositories effectively.
The tale of 1000 cores: an evaluation of concurrency control on real(ly) large multi-socket hardware
(2020)
In this paper, we set out the goal to revisit the results of “Starring into the Abyss [...] of Concurrency Control with [1000] Cores” and analyse in-memory DBMSs on today’s large hardware. Despite the original assumption of the authors, today we do not see single-socket CPUs with 1000 cores. Instead multi-socket hardware made its way into production data centres. Hence, we follow up on this prior work with an evaluation of the characteristics of concurrency control schemes on real production multi-socket hardware with 1568 cores. To our surprise, we made several interesting findings which we report on in this paper.
In this paper, we propose a radical new approach for scale-out distributed DBMSs. Instead of hard-baking an architectural model, such as a shared-nothing architecture, into the distributed DBMS design, we aim for a new class of so-called architecture-less DBMSs. The main idea is that an architecture-less DBMS can mimic any architecture on a per-query basis on-the-fly without any additional overhead for reconfiguration. Our initial results show that our architecture-less DBMS AnyDB can provide significant speedup across varying workloads compared to a traditional DBMS implementing a static architecture.
In this paper, we present a new approach for achieving robust performance of data structures making it easier to reuse the same design for different hardware generations but also for different workloads. To achieve robust performance, the main idea is to strictly separate the data structure design from the actual strategies to execute access operations and adjust the actual execution strategies by means of so-called configurations instead of hard-wiring the execution strategy into the data structure. In our evaluation we demonstrate the benefits of this configuration approach for individual data structures as well as complex OLTP workloads.
Analog-/Mixed-Signal (AMS) design verification is one of the most challenging and time consuming tasks of todays complex system on chip (SoC) designs. In contrast to digital system design, AMS designers have to deal with a continuous state space of conservative quantities, highly nonlinear relationships, non-functional influences, etc. enlarging the number of possibly critical scenarios to infinity. In this special session we demonstrate the verification of functional properties using simulative and formal methods. We combine different approaches including automated abstraction and refinement of mixed-level models, state-space discretization as well as affine arithmetic. To reach sufficient verification coverage with reasonable time and effort, we use enhanced simulation schemes to avoid conventional simulation drawbacks.
An integrated synchronous buck converter with a high resolution dead time control for input voltages up to 48V and 10MHz switching frequency is presented. The benefit of an enhanced dead time control at light loads to enable zero voltage switching at both the high-side and low-side switch at low output load is studied. This way, compact multi-MHz DCDC converters can be implemented at high efficiency over a wide load current range. The concept also eliminates body diode forward conduction losses and minimizes reverse recovery losses. A dead time resolution of 125 ps is realized by an 8-bit differential delay chain. A further efficiency enhancement by soft switching at the high-side switch at light load is achieved with a voltage boost of the switching node by dead time control in forced continuous conduction mode. The monolithic converter is implemented in an 180nm high-voltage BiCMOS technology. At V IN = 48V, V OUT = 5V, 50mA load, 10MHz switching frequency and 500 nH output inductance, the efficiency is measured to be increased by 14.4% compared to a conventional predictive dead time control. A peak efficiency of 80.9% is achieved at 12V input.
Changing requirements and qualification profiles of employees, increasingly complex digital systems up to artificial intelligence, missing standards for the seamless embedding of existing resources and unpredictable return on investments are just a few examples of the challenges of an SME in the age of digitalisation. In most cases there is a lack of suitable tools and methods to support companies in the digital transformation process in the value creation processes, but also of training and learning materials. A European research project (BITTMAS - Business Transformation towards Digitalisation and Smart systems, ERASMUS+, 2016-1 DE02-KA202-003437) with international partners from science, associations and industry has addressed this issue and developed various methods and instruments to support SMEs. Within the scope of a literature search, 16 suitable digitalisation concepts for production and logistics were identified. In the following, a learning platform with a literature database with multivariable sorting options according to branches and keywords of digitalisation, a video gallery with basic and advanced knowledge and a glossary were created in order to provide the user with consolidated and structured specialist knowledge. The 16 identifying concepts for transforming value-added processes in the context of digitalisation were transferred to a learning platform using developed learning paths in coaching and training to online course modules including test questions. A maturity model was developed and implemented in a self assessment tool for the analysis to identify the potential of digitalisation in production and logistics in relation to the current technological digitalisation level of the company. As a result, the user receives one or more of the 16 potential digitalisation concepts suggested or the delta for the necessary, not yet available enabler technologies is presented as a spider diagram. For a successful implementation of the identified suitable digitalisation concepts in production and logistics, a further tool was developed to identify supplementary requirements for all company divisions and stakeholders in relation to the "digital transformation" in the form of a self-evaluation. This paper presents the methods and tools developed, the accompanying learning materials and the learning platform.
Forecasting demand is challenging. Various products exhibit different demand patterns. While demand may be constant and regular for one product, it may be sporadic for another, as well as when demand occurs, it may fluctuate significantly. Forecasting errors are costly and result in obsolete inventory or unsatisfied demand. Methods from statistics, machine learning, and deep learning have been used to predict such demand patterns. Nevertheless, it is not clear for what demand pattern, which algorithm would achieve the best forecast. Therefore, even today a large number of models are used to forecast on a test period. The model with the best result on the test period is used for the actual forecast. This approach is computationally and time intensive and, in most cases, uneconomical. In our paper we show the possibility to use a machine learning classification algorithm, which predicts the best possible model based on the characteristics of a time series. The approach was developed and evaluated on a dataset from a B2B-technical-retailer. The machine learning classification algorithm achieves a mean ROC-AUC of 89%, which emphasizes the skill of the model.
Machine learning (ML) techniques are rapidly evolving, both in academia and practice. However, enterprises show different maturity levels in successfully implementing ML techniques. Thus, we review the state of adoption of ML in enterprises. We find that ML technologies are being increasingly adopted in enterprises, but that small and medium-size enterprises (SME) are struggling with the introduction in comparison to larger enterprises. In order to identify enablers and success factors we conduct a qualitative empirical study with 18 companies in different industries. The results show that especially SME fail to apply ML technologies due to insufficient ML knowhow. However, partners and appropriate tools can compensate this lack of resources. We discuss approaches to bridge the gap for SME.
The basic idea behind a wearable robotic grasp assistancesystem is to support people that suffer from severe motor impairments in daily activities. Such a system needs to act mostly autonomously and according to the user’s intent. Vision-based hand pose estimation could be an integral part of a larger control and assistance framework. In this paper we evaluate the performance of egocentric monocular hand pose estimation for a robot-controlled hand exoskeleton in a simulation. For hand pose estimation we adopt a Convolutional Neural Network (CNN). We train and evaluate this network with computer graphics, created by our own data generator. In order to guide further design decisions we focus in our experiments on two egocentric camera viewpoints tested on synthetic data with the help of a 3D-scanned hand model, with and without an exoskeleton attached to it.We observe that hand pose estimation with a wrist-mounted camera performs more accurate than with a head-mounted camera in the context of our simulation. Further, a grasp assistance system attached to the hand alters visual appearance and can improve hand pose estimation. Our experiment provides useful insights for the integration of sensors into a context sensitive analysis framework for intelligent assistance.
Additive Manufacturing is increasingly used in the industrial sector as a result of continuous development. In the Production Planning and Control (PPC) system, AM enables an agile response in the area of detailed and process planning, especially for a large number of plants. For this purpose, a concept for a PPC system for AM is presented, which takes into account the requirements for integration into the operational enterprise software system. The technical applicability will be demonstrated by individual implemented sections. The presented solution approach promises a more efficient utilization of the plants and a more elastic use.
Additive manufacturing (AM) is a promising manufacturing method for many industrial sectors. For this application, industrial requirements such as high production volumes and coordinated implementation must be taken into account. These tasks of the internal handling of production facilities are carried out by the Production Planning and Control (PPC) information system. A key factor in the planning and scheduling is the exact calculation of manufacturing times. For this purpose we investigate the use of Machine Learning (ML) for the prediction of manufacturing times of AM facilities.
The blockchain technology enables a common data basis between the participants. Entries are logged and the authenticity of the participants is guaranteed. In the case of a relationship between customers and producers, this would lead to verifiable cooperation, which would be a major step as companies enter into service contracts based on the flow of many small transactions through communication. This paper proposes an architecture that enables the creation and processing of orders between the customer and producers via a blockchain based production network. The handling of larger files which are traceable via the blockchain is also shown and the use of a public or permissioned blockchain for an application case is also considered.
Long-term stability of membranes in membrane distillation operation is a problem nowadays which prevents the industrial breakthrough of this separation process. Fouling or slow pore wetting are the basic reasons for this.
Membrane distillation membranes were made by NIPS process rendering the membrane asymmetrically to achieve low permeation resistance and pores which can be over coated with polyelectrolyte polymers thus leading to thermopervaporation membranes. Those membranes prohibit pore wetting and may strongly reduce resorption of organic substances on for membrane distillation typically used hydrophobic surfaces thus leading to longterm operation stability in dewatering including stable membrane cleaning.
Asymmetric PVDF membranes have been coated with cation exchange polyelectrolyte leading to a very thin, defect-free layer which has a high permeation rate for water due to the domain structure of phase-separated hydrophilic and hydrophobic three-dimensional structures.
The performance and scalability of modern data-intensive systems are limited by massive data movement of growing datasets across the whole memory hierarchy to the CPUs. Such traditional processor-centric DBMS architectures are bandwidth- and latency-bound. Processing-in-Memory (PIM) designs seek to overcome these limitations by integrating memory and processing functionality on the same chip. PIM targets near- or in-memory data processing, leveraging the greater in-situ parallelism and bandwidth.
In this paper, we introduce pimDB and provide an initial comparison of processor-centric and PIM-DBMS approaches under different aspects, such as scalability and parallelism, cache-awareness, or PIM-specific compute/bandwidth tradeoffs. The evaluation is performed end-to-end on a real PIM hardware system from UPMEM.
Even though near-data processing (NDP) can provably reduce data transfers and increase performance, current NDP is solely utilized in read-only settings. Slow or tedious to implement synchronization and invalidation mechanisms between host and smart storage make NDP support for data-intensive update operations difficult. In this paper, we introduce a low-latency cache-coherent shared lock table for update NDP settings in disaggregated memory environments. It utilizes the novel CCIX interconnect technology and is integrated in neoDBMS, a near-data processing DBMS for smart storage. Our evaluation indicates end-to-end lock latencies of ∼80-100ns and robust performance under contention.
Multi-versioning and MVCC are the foundations of many modern DBMSs. Under mixed workloads and large datasets, the creation of the transactional snapshot can become very expensive, as long-running analytical transactions may request old versions, residing on cold storage, for reasons of transactional consistency. Furthermore, analytical queries operate on cold data, stored on slow persistent storage. Due to the poor data locality, snapshot creation may cause massive data transfers and thus lower performance. Given the current trend towards computational storage and near-data processing, it has become viable to perform such operations in-storage to reduce data transfers and improve scalability. neoDBMS is a DBMS designed for near-data processing and computational storage. In this paper, we demonstrate how neoDBMS performs snapshot computation in-situ. We showcase different interactive scenarios, where neoDBMS outperforms PostgreSQL 12 by up to 5×.
This work is a report on practical experiences with the issue of interoperability in German practice management systems (PMSs) from an ongoing clinical trial on teledermatology, the TeleDerm project. A proprietary and established web-platform for store-and-forward telemedicine is integrated with the IT in the GPs’ offices for automatic exchange of basic patient data. Most of the 19 different PMSs included in the study sample lack support of modern health data exchange standards, therefore the relatively old but widely available German health data exchange interface “Gerätedatentransfer” (GDT) is used. Due to the lack of enforcement and regulation of the GDT standard, several obstacles to interoperability are encountered. As a partial, but reusable working solution to cope with these issues, we present a custom middleware which is used in conjunction with GDT. We describe the design, technical implementation and observed hindrances with the existing infrastructure. A discussion on health care interfacing standards and the current state of interoperability in German PMS software is given.
The design process for a single phase, smart, universal charger for light electric vehicles, is presented. With a step up, power factor correction circuit, followed by a phase shifted, full bridge converter, with synchronous rectification on the secondary side. Due to the resistor-capacitor-diode snubber on the secondary side, the current peak at the start of power transfer, leads to false triggering during light load control with peak current mode control. The solution developed for light loads, is to change from peak current control to voltage control. This is achieved by limiting the maximum phase shift, instead of changing the reference value. For the power factor correction stage, measured and calculated efficiencies are compared as a function of the output power. The voltage and current waveforms are shown for the power factor correction circuit, and for the phase shifted bridge, the measured current waveform is compared with simulation.
Motivation
In order to enable context-aware behavior of surgical assistance systems, the acquisition of various information about the current intraoperative situation is crucial. To achieve this, the complex task of situation recognition can be delegated to a specialized system. Consequently, a standardized interface is required for the seamless transfer of the recognized contextual information to the assistance systems, enabling them to adapt accordingly.
Methods
Our group analyzed four medical interface standards to determine their suitability for exchanging intraoperative contextual information. The assessment was based on a harmonized data and service model derived from the requirements of expected context-aware use cases. The Digital Imaging and Communications in Medicine (DICOM) and IEEE 11073 for Service-oriented Device Connectivity (SDC) were identified as the most appropriate standards.
Results
We specified how DICOM Unified Procedure Steps (UPS), can be used to effectively communicate contextual information. We proposed the inclusion of attributes to formalize different granularity levels of the surgical workflow.
Conclusions
DICOM UPS SOP classes can be used for the exchange of intraoperative contextual information between a situation recognition system and surgical assistance systems. This can pave the way for vendor-independent context awareness in the OR, leading to targeted assistance of the surgical team and an improvement of the surgical workflow.
Large critical systems, such as those created in the space domain, are usually developed by a large number of organizations and, furthermore, they have to comply with standards. Yet, the different stakeholders often do not have a common understanding of the needed quality of requirements specifications. Achieving such a common understanding is a laborious process that is currently not sufficiently supported. Moreover, such a common understanding must be aligned with the standards. In this paper, we present an approach that can be used to align the different stakeholder perceptions regarding the quality of requirements specifications. Existing quality models for requirements specifications are analyzed for equivalences, and transferred into a common representation, the so-called Aligned Quality Map (AQM). Furthermore, a process is defined that supports the alignment of different stakeholder perspectives with regard to the quality of requirements specifications using AQM, which is validated in a case study in the context of European space projects. AQM has been created and populated with an initial set of quality models. It is designed in such way that it can be extended to include further quality models. The case study has shown that an alignment of different stakeholder perspectives and the quality model of the European Cooperation for Space Standardization using AQM is feasible. The approach allows for aligning different stakeholder perspectives for a common understanding of the quality of requirements specifications in the context of standards. Furthermore, AQM supports the assessment of requirements specifications.
This paper investigates the possibility to effectively monitor and control the respiratory action using a very simple and non invasive technique based on a single lightweight reduced-size wireless surface electromyography (sEMG) sensor placed below the sternum. The captured sEMG signal, due to the critical sensor position, is characterized by a low energy level and it is affected by motion artifacts and cardiac noise. In this work we present a preliminary study performed on adults for assessing the correlation of the spirometry signal and the sEMG signal after the removal of the superimposed heart signal. This study and the related findings could be useful in respiratory monitoring of preterm infants.
Electromigration (EM) is becoming a progressively severe reliability challenge due to increased interconnect current densities. A shift from traditional (post-layout) EM verification to robust (pro-active) EM aware design - where the circuit layout is designed with individual EM-robust solutions - is urgently needed. This tutorial will give an overview of EM and its effects on the reliability of present and future integrated circuits (ICs). We introduce the physical EM process and present its specific characteristics that can be affected during physical design. Examples of EM countermeasures which are applied in today’s commercial design flows are presented. We show how to improve the EM-robustness of metallization patterns and we also consider mission proiles to obtain application-oriented current density limits. The increasing interaction of EM with thermal migration is investigated as well. We conclude with a discussion of application examples to shift from the current post layout EM verification towards an EM aware physical design process. Its methodologies, such as EM-aware routing, increase the EM-robustness of the layout with the overall goal of reducing the negative impact of EM on the circuit’s reliability.
In the luxury Fashion industry, consumers could be categorized into two groups: fashion leader and Fashion follower. Both groups of consumers purchase luxury fashion products aim at satisfying both their functional needs and social needs (i.e., social influence). Thus the demands of both consumer groups are related. In this paper, we construct a model to examine the effects of pricing and online retail service in luxury fashion firms with social influence. To maximize profit, we identify the optimal prices and online retail service when the luxury fashion firms provide the non-differentiated and differentiated online retail services, respectively. More insights are discussed.
Smart meter based business models for the electricity sector : a systematical literature research
(2017)
The Act on the Digitization of the Energy Transition forces German industries and households to introduce smart meters in order to save engery, to gain individual based electricity tariffs and to digitize the energy data flow. Smart meter can be regarded as the advancement of the traditional meter. Utilizing this new technology enables a wide range of innovative business models that provide additional value for the electricity suppliers as well as for their customers. In this study, we followed a two-step approach. At first, we provide a state-of-the-art comparison of these business models found in the literature and identify structural differences in the way they add value to the offered products and services. Secondly, the business models are grouped into categories with respect to customer segmetns and the added value to the smart grid. Findings indicate that most business models focus on the end-costumer as their main customer.
Learning factories on demand
(2021)
Learning Factories are research and learning environments that demonstrate new concepts and technologies for the industry in a practical environment. The interaction between physical and virtual components is a central aspect. The mediation and presentation usually occur directly in the learning factory and are thus limited in time and concerning the user group. A learning factory- on-demand- can be provided by dividing and virtualizing the individual components via containers and microservices. This enables both local operation and operation hybrid cloud or cloud systems. Physical components can be mapped either through standardized interfaces or suitable emulators. Using the example of the Learning Factory at Reutlingen University (Werk150), it will be shown how different use cases can be made available utilizing software-based orchestration, thus promoting broader and more independent teaching.
The imparting of knowledge and skills in STEM education, especially under the influence of the Covid-19 pandemic, is increasingly taking place online and through digital formats. The partially asynchronous instruction eliminates, on the one hand, the social relation in the learning process and, on the other hand, the direct experience with physical objects. Here, the digital learning systems provide learning tools and controls to support the learning process on a general basis. Existing methods for simulating physical objects (digital twins) are also used to a minimal extent. The following approach presents a learning system framework that enables individualized learning, including all dimensions (social, physical). Implementing a concept that uses a personalized assistance system to orchestrate the individual learning steps enables efficient and effective learning. Applying the learning system framework exemplifies the STEM education at Reutlingen University in the logistics learning factory Werk150.
It is widely recognized that Education for Sustainable Development (ESD) plays a critical role in creating a more sustainable world by fostering the development of the knowledge, skills, understanding, values, and actions necessary for such change (UNESCO, 2020). In this context, ESD represents a holistic approach that focuses on lifelong learning to create informed people who can make decisions today and in the future. Related to the textile and fashion industry, ESD is an appropriate approach to continuously implement sustainability aspects in education and training. To achieve this goal, the European project "Sustainable Fashion Curriculum at Textile Universities in Europe - Development, Implementation and Evaluation of a Teaching Module for Educators" (Fashion DIET) has developed a digital teaching module in a partnership between a University of Education and universities with textile departments. The main objective of the project is to elaborate an ESD module for university lecturers in order to introduce a sustainable fashion curriculum in textile universities in Europe and implement it in educational systems. The project therefore aims to train educators along the textile supply chain, to inform the young generation about the latest aspects of sustainability and raise awareness by implementing ESD in textile education. This paper presents the learning outcomes of the modules on sustainable fashion design and related production technologies developed by the technical university partners, as part of the total of 42 courses covering didactic-methodological approaches and the sustainable orientation of the fashion market, offered at the consortium level. The project content is made available as Open Educational Resources through Glocal Campus, an open-access e-learning platform that enables virtual collaboration between universities.
The strong demand to transform the textile and fashion industry towards sustainability requires continuous implementation of the Education for Sustainable Development (ESD) mission statement in education and industry. To achieve this goal, the European research project "Fashion DIET - Sustainable Fashion Curriculum at Textile Universities in Europe. Development, Implementation and Evaluation of a Teaching Module for Educators", co-funded by the Erasmus+ programme of the European Union (2020-1-DE01-KA203-005657), aims to create an ESD module for university lecturers and research-based teaching and learning materials delivered through an e-learning portal. First, an online questionnaire was rolled out to assess university faculty attitudes toward and needs for ESD content and methods. The feedback questionnaire enabled the selection of the most relevant data for the elaboration of an action and research-oriented professional development module for ESD in textile education, which will be accessible through an information & e-learning portal. The e-learning portal can be used as a web-based tool to apply and evaluate the project outcomes, e.g. the further education module and the teaching and learning materials for educators, such as manuals, broadcasts and the provision of interactive and physical materials. It thus ensures that the teaching materials can be used sustainably in the classroom. It also provides country-specific data for the fashion and textile industry and its market, taking into account the different perspectives of universities and schools. In any case, the portal represents (1) the web-based platform to support the dissemination of ESD as a guiding principle and (2) a central contact point for the target group to obtain relevant information on ESD. Fashion DIET explores the use of e-learning to improve teaching and learning on ESD, by training educators and empowering them as multipliers for a sustainable textile and fashion industry. At a higher level, the European project strengthens the quality and relevance of learning provision in education towards the latest developments in textile research and innovation in terms of a more sustainable fashion.
Prior to the introduction of AI-based forecast models in the procurement department of an industrial retail company, we assessed the digital skills of the procurement employees and surveyed their attitudes toward a new digital technology. The aim of the survey was to ascertain important contextual factors which are likely to influence the acceptance and the successful use of the new forecast tool. What we find is that the digital skills of the employees show an intermediate level and that their attitudes toward key aspects of new digital technologies are largely positive. Thus, the conditions for high acceptance and the successful use of the models are good, as evidenced by the high intention of the procurement staff to use the models. In line with previous research, we find that the perceived usefulness of a new technology and the perceived ease of use are significant drivers of the willingness to use the new forecast tool.
Due to the consequential impact of technological breakdowns, companies have to be prepared to deal with breakdowns or even better prevent them. In today's information technology, several methods and tools exist to downscale this concern. Therefore, this paper deals with the initial determination of a resilient enterprise architecture supporting predictive maintenance in the information technology domain and furthermore, concerns several mechanisms on how to reactively and proactively secure the state of resiliency on several abstraction levels. The objective of this paper is to give an overview on existing mechanisms for resiliency and to describe the foundation of an optimized approach, combining infrastructure and process mining techniques.
While the concepts of object-oriented antipatterns and code smells are prevalent in scientific literature and have been popularized by tools like SonarQube, the research field for service-based antipatterns and bad smells is not as cohesive and organized. The description of these antipatterns is distributed across several publications with no holistic schema or taxonomy. Furthermore, there is currently little synergy between documented antipatterns for the architectural styles SOA and Microservices, even though several antipatterns may hold value for both. We therefore conducted a Systematic Literature Review (SLR) that identified 14 primary studies. 36 service-based antipatterns were extracted from these studies and documented with a holistic data model. We also categorized the antipatterns with a taxonomy and implemented relationships between them. Lastly, we developed a web application for convenient browsing and implemented a GitHub-based repository and workflow for the collaborative evolution of the collection. Researchers and practitioners can use the repository as a reference, for training and education, or for quality assurance.
While there are several theoretical comparisons of Object Orientation (OO) and Service Orientation (SO), little empirical research on the maintainability of the two paradigms exists. To provide support for a generalizable comparison, we conducted a study with four related parts. Two functionally equivalent systems (one OO and one SO version) were analyzed with coupling and cohesion metrics as well as via a controlled experiment, where participants had to extend the systems. We also conducted a survey with 32 software professionals and interviewed 8 industry experts on the topic. Results indicate that the SO version of our system possesses a higher degree of cohesion, a lower degree of coupling, and could be extended faster. Survey and interview results suggest that industry sees systems built with SO as more loosely coupled, modifiable, and reusable. OO systems, however, were described as less complex and easier to test.
Real Time Charging (RTC) applications that reside in the telecommunications domain have the need for extremely fast database transactions. Today´s providers rely mostly on in-memory databases for this kind of information processing. A flexible and modular benchmark suite specifically designed for this domain provides a valuable framework to test the performance of different DB candidates. Besides a data and a load generator, the suite also includes decoupled database connectors and use case components for convenient customization and extension. Such easily produced test results can be used as guidance for choosing a subset of candidates for further tuning/testing and finally evaluating the database most suited to the chosen use cases. This is why our benchmark suite can be of value for choosing databases for RTC use cases.
Microservices are a topic driven mainly by practitioners and academia is only starting to investigate them. Hence, there is no clear picture of the usage of Microservices in practice. In this paper, we contribute a qualitative study with insights into industry adoption and implementation of Microservices. Contrary to existing quantitative studies, we conducted interviews to gain a more in-depth understanding of the current state of practice. During 17 interviews with software professionals from 10 companies, we analyzed 14 service-based systems. The interviews focused on applied technologies, Microservices characteristics, and the perceived influence on software quality. We found that companies generally rely on well established technologies for service implementation, communication, and deployment. Most systems, however, did not exhibit a high degree of technological diversity as commonly expected with Microservices. Decentralization and product character were different for systems built for external customers. Applied DevOps practices and automation were still on a mediocre level and only very few companies strictly followed the you build it, you run it principle. The impact of Microservices on software quality was mainly rated as positive. While maintainability received the most positive mentions, some major issues were associated with security. We present a description of each case and summarize the most important findings of companies across different domains and sizes. Researchers may build upon our findings and take them into account when designing industry-focused methods.
While Microservices promise several beneficial characteristics for sustainable long-term software evolution, little empirical research covers what concrete activities industry applies for the evolvability assurance of Microservices and how technical debt is handled in such systems. Since insights into the current state of practice are very important for researchers, we performed a qualitative interview study to explore applied evolvability assurance processes, the usage of tools, metrics, and patterns, as well as participants’ reflections on the topic. In 17 semi-structured interviews, we discussed 14 different Microservice-based systems with software professionals from 10 companies and how the sustainable evolution of these systems was ensured. Interview transcripts were analyzed with a detailed coding system and the constant comparison method.
We found that especially systems for external customers relied on central governance for the assurance. Participants saw guidelines like architectural principles as important to ensure a base consistency for evolvability. Interviewees also valued manual activities like code review, even though automation and tool support was described as very important. Source code quality was the primary target for the usage of tools and metrics. Despite most reported issues being related to Architectural Technical Debt (ATD), our participants did not apply any architectural or service-oriented tools and metrics. While participants generally saw their Microservices as evolvable, service cutting and finding an appropriate service granularity with low coupling and high cohesion were reported as challenging. Future Microservices research in the areas of evolution and technical debt should take these findings and industry sentiments into account.
Maintainability assurance techniques are used to control this quality attribute and limit the accumulation of potentially unknown technical debt. Since the industry state of practice and especially the handling of service- and microservice-based systems in this regard are not well covered in scientific literature, we created a survey to gather evidence for a) used processes, tools, and metrics in the industry, b) maintainability-related treatment of systems based on service orientation, and c) influences on developer satisfaction w.r.t. maintainability. 60 software professionals responded to our online questionnaire. The results indicate that using explicit and systematic techniques has benefits for maintainability. The more sophisticated the applied methods the more satisfied participants were with the maintainability of their software while no link to a hindrance in productivity could be established. Other important findings were the absence of architecture-level evolvability control mechanisms as well as a significant neglect of service-oriented particularities for quality assurance. The results suggest that industry has to improve its quality control in these regards to avoid problems with long living service-based software systems.
While several service-based maintainability metrics have been proposed in the scientific literature, reliable approaches to automatically collect these metrics are lacking. Since static analysis is complicated for decentralized and technologically diverse microservice-based systems, we propose a dynamic approach to calculate such metrics from runtime data via distributed tracing. The approach focuses on simplicity, extensibility, and broad applicability. As a first prototype, we implemented a Java application with a Zipkin integrator, 23 different metrics, and five export formats. We demonstrated the feasibility of the approach by analyzing the runtime data of an example microservice based system. During an exploratory study with six participants, 14 of the 18 services were invoked via the system’s web interface. For these services, all metrics were calculated correctly from the generated traces.