Refine
Document Type
- Conference proceeding (220) (remove)
Language
- English (220) (remove)
Is part of the Bibliography
- yes (220)
Institute
- Technik (220) (remove)
Publisher
- IEEE (120)
- VDE Verlag GmbH (14)
- ACM (8)
- Springer (7)
- European Association for the Development of Renewable Energy, Environment and Power Quality (4)
- SCITEPRESS (4)
- University of Colorado (4)
- Hochschule Ulm (3)
- Technische Universität Berlin (3)
- VDE (3)
As fuel prices climb and the global automotive sector migrates to more sustainable vehicle technologies, the future of South Africa’s minibus taxis is in flux. The authors’ previous research has found that battery electric technology struggles to meet all the mobility requirements of minibus taxis. They investigate the technical feasibility of powering taxis with hydrogen fuel cells instead. The following results are projected using a custom-built simulator, and tracking data of taxis based in Stellenbosch, South Africa. Each taxi requires around 12 kg of hydrogen gas per day to travel an average distance of 360 km. 465 kWh of electricity, or 860 m2 of solar panels, would electrolyse the required green hydrogen. An economic analysis was conducted on the capital and operational expenses of a system of ten hydrogen taxis and an electrolysis plant. Such a pilot project requires a minimum investment of € 3.8 million (R 75 million), for a 20 year period. Although such a small scale roll-out is technically feasible and would meet taxis’ performance requirements, the investment cost is too high, making it financially unfeasible. They conclude that a large scale solution would need to be investigated to improve financial feasibility; however, South Africa’s limited electrical generation capacity poses a threat to its technical feasibility. The simulator is uploaded at: https://gitlab.com/eputs/ev-fleet-sim-fcv-model.
Most Question-answering (QA) systems rely on training data to reach their optimal performance. However, acquiring training data for supervised systems is both time-consuming and resource-intensive. To address this, in this paper, we propose TFCSG, an unsupervised similar question retrieval approach that leverages pre-trained language models and multi-task learning. Firstly, topic keywords in question sentences are extracted sequentially based on a latent topic-filtering algorithm to construct unsupervised training corpus data. Then, the multi-task learning method is used to build the question retrieval model. There are three tasks designed. The first is a short sentence contrastive learning task. The second is the question sentence and its corresponding topic sequence similarity judgment task. The third is using question sentences to generate their corresponding topic sequence task. The three tasks are used to train the language model in parallel. Finally, similar questions are obtained by calculating the cosine similarity between sentence vectors. The comparison experiment on public question datasets that TFCSG outperforms the comparative unsupervised baseline method. And there is no need for manual marking, which greatly saves human resources.
Analog-/Mixed-Signal (AMS) design verification is one of the most challenging and time consuming tasks of todays complex system on chip (SoC) designs. In contrast to digital system design, AMS designers have to deal with a continuous state space of conservative quantities, highly nonlinear relationships, non-functional influences, etc. enlarging the number of possibly critical scenarios to infinity. In this special session we demonstrate the verification of functional properties using simulative and formal methods. We combine different approaches including automated abstraction and refinement of mixed-level models, state-space discretization as well as affine arithmetic. To reach sufficient verification coverage with reasonable time and effort, we use enhanced simulation schemes to avoid conventional simulation drawbacks.
An integrated synchronous buck converter with a high resolution dead time control for input voltages up to 48V and 10MHz switching frequency is presented. The benefit of an enhanced dead time control at light loads to enable zero voltage switching at both the high-side and low-side switch at low output load is studied. This way, compact multi-MHz DCDC converters can be implemented at high efficiency over a wide load current range. The concept also eliminates body diode forward conduction losses and minimizes reverse recovery losses. A dead time resolution of 125 ps is realized by an 8-bit differential delay chain. A further efficiency enhancement by soft switching at the high-side switch at light load is achieved with a voltage boost of the switching node by dead time control in forced continuous conduction mode. The monolithic converter is implemented in an 180nm high-voltage BiCMOS technology. At V IN = 48V, V OUT = 5V, 50mA load, 10MHz switching frequency and 500 nH output inductance, the efficiency is measured to be increased by 14.4% compared to a conventional predictive dead time control. A peak efficiency of 80.9% is achieved at 12V input.
The design process for a single phase, smart, universal charger for light electric vehicles, is presented. With a step up, power factor correction circuit, followed by a phase shifted, full bridge converter, with synchronous rectification on the secondary side. Due to the resistor-capacitor-diode snubber on the secondary side, the current peak at the start of power transfer, leads to false triggering during light load control with peak current mode control. The solution developed for light loads, is to change from peak current control to voltage control. This is achieved by limiting the maximum phase shift, instead of changing the reference value. For the power factor correction stage, measured and calculated efficiencies are compared as a function of the output power. The voltage and current waveforms are shown for the power factor correction circuit, and for the phase shifted bridge, the measured current waveform is compared with simulation.
Electromigration (EM) is becoming a progressively severe reliability challenge due to increased interconnect current densities. A shift from traditional (post-layout) EM verification to robust (pro-active) EM aware design - where the circuit layout is designed with individual EM-robust solutions - is urgently needed. This tutorial will give an overview of EM and its effects on the reliability of present and future integrated circuits (ICs). We introduce the physical EM process and present its specific characteristics that can be affected during physical design. Examples of EM countermeasures which are applied in today’s commercial design flows are presented. We show how to improve the EM-robustness of metallization patterns and we also consider mission proiles to obtain application-oriented current density limits. The increasing interaction of EM with thermal migration is investigated as well. We conclude with a discussion of application examples to shift from the current post layout EM verification towards an EM aware physical design process. Its methodologies, such as EM-aware routing, increase the EM-robustness of the layout with the overall goal of reducing the negative impact of EM on the circuit’s reliability.
This paper introduces a novel placement methodology for a common-centroid (CC) pattern generator. It can be applied to various integrated circuit (IC) elements, such as transistors, capacitors, diodes, and resistors. The proposed method consists of a constructive algorithm which generates an initial, close to the optimum, solution, and an iterative algorithm which is used subsequently, if the output of constructive algorithm does not satisfy the desired criteria. The outcome of this work is an automatic CC placement algorithm for IC element arrays. Additionally, the paper presents a method for the CC arrangement evaluation. It allows for evaluating the quality of an array, and a comparison of different placement methods.
Lithographical hotspot (LH) detection using deep learning (DL) has received much attention in the recent years. It happens mainly due to the facts the DL approach leads to a better accuracy over the traditional, state-of-the-art programming approaches. The purpose of ths study is to compare existing data augmentation (DA) techniques for the integrated circuit (IC) mask data using DL methods. DA is a method which refers to the process of creating new samples similar to the training set, thereby helping to reduce the gap between classes as well as improving the performance of the DL system. Experimental results suggest that the DA methods increase overall DL models performance for the hotspot detection tasks.
The hotspot detection has received much attention in the recent years due to a substantial mismatch between lithography wavelength and semiconductor technology feature size. This mismatch causes diffraction when transferring the layout from design onto a silicon wafer. As a result, open or short circuits (i.e. lithography hotspots) are more likely to be produced. Additionally, increasing numbers of semiconductors devices on a wafer required more time for the lithography hotspot detection analysis. In this work, we propose a fast and accurate solution based on novel artificial neural network (ANN) architecture for precise lithography hotspot detection using a convolution neural network (CNN) adopting a state of-the-art technique. The experimental results showed that the proposed model gained accuracy improvement over current state-of-theart approaches. The final code has been made publicly available.
Patterns are virtually simulated in 3D CAD programs before production to check the fit. However, achieving lifelike representations of human avatars, especially regarding soft tissue dynamics, remains challenging. This is mainly since conventional avatars in garment CAD programs are simulated with a continuous hard surface and not corresponding to the human physical and mechanical body properties of soft tissue. In the real world, the human body’s natural shape is affected by the contact pressure of tight-fitting textiles. To verify the fit of a simulated garment, the interactions between the individual body shape and the garment must be considered. This paper introduces an innovative approach to digitising the softness of human tissue using 4D scanning technology. The primary objective of this research is to explore the interactions between tissue softness and different compression levels of apparel, exerting pressure on the tissue to capture the changes in the natural shape. Therefore, to generate data and model an avatar with soft body physics, it is essential to capture the deform ability and elasticity of the soft tissue and map it into the modification options for a simulation. To aim this, various methods from different fields were researched and compared to evaluate 4D scanning as the most suitable method for capturing tissue deformability in vivo. In particular, it should be considered that the human body has different deformation capabilities depending on age, the amount of muscle and body fat. In addition, different tissue zones have different mechanical properties, so it is essential to identify and classify them to back up these properties for the simulation. It has been shown that by digitising the obtained data of the different defined applied pressure levels, a prediction of the deformation of the tissue of the exact person becomes possible. As technology advances and data sets grow, this approach has the potential to reshape how we verify fit digitally with soft avatars and leverage their realistic soft tissue properties for various practical purposes.
In order to evaluate the performance of different stapes prosthesis types, a coupled finite element (FE) model of human ear was developed. First, the middle-ear FE model was developed and validated using the middle-ear transfer function measurements available in literature including pathological cases. Then, the inner-ear FE model was developed and validated using tonotopy, impedance, and level of cochlea amplification curves from literature. Both models are based on pre-existing research with some improvements and were combined into one coupled FE model. The stapes in the coupled FE ear model was replaced with a model of a stapes prosthesis to create a reconstructed ear model that can be used to estimate how different types of protheses perform relative to each other as well as to the natural ear. This will help in designing of new innovative types of stapes prostheses or any other type of middle-ear prostheses as well as to improve the ones that are already available on the market.
This study describes a non-contact measuring and system identification procedure for evaluating inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament.
This study describes a non-contact measuring and parameter identification procedure designed to evaluate inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament. This method can potentially help to establish a correlation between stiffness and damping characteristics of the annular ligament and inertia properties of the stapes and, thus, help to reduce the number of independent parameters in the model-based hearing diagnosis.
Urgent action is needed to keep the chance of limiting global warming to 1.5°C or even 2.0°C. Current outlooks by IPCC, and many other organisations forecast that this will be impossible at current pace of emission 'reductions' – Germany has already hit 1.5° warming this year. Across 2019, particularly during the UN New York Climate summit, numerous organisations declared their ambition to become net carbon neutral. Amongst these were investors and companies, including quite a number of German ones.
We apply a mixed methods approach, utilising data gathered from approx. 900 companies after Climate Week in context of the Energy Efficiency Index of German Industry (EEI), along with media research focusing on decarbonisation plans announced and initiatives pledging climate action.
With this, we analyse how German companies in the manufacturing sectors react to rising societal pressure and emerging policies, particularly what measures they have taken or plan to implement to reduce the footprint of their company, their products and their supply chain. In this, we particularly analyse whether and in what way energy- and resource consumption, as well as carbon emissions are considered in the development and lifecycle of goods manufactured. This is of huge relevance as these goods determine the future footprint of buildings, vehicles and industry.
Regarding the supply chain, current articles indicate that small and medium-sized enterprises (SME) are particularly challenged by increasing demands from their large corporate clients and an alleged lack of preparedness to be able to take and afford prompt decarbonisation action themselves (Buchenau et. al. 2019). Notably the automotive industry recently announced new models that will be 100% carbon neutral all the way through (ibid). We thus analyse if and how factors such as company size, energy intensity and sector affiliation influence a company’s plan to fully decarbonize. Ownership structure and corporate culture, it appears, significantly impact on the degree of decarbonisation action underway.
The diversity of energy prosumer types makes it difficult to create appropriate incentive mechanisms that satisfy both prosumers and energy system operators alike. Meanwhile, European energy suppliers buy guarantees of origin (GoO) which allow them to sell green energy at premium prices while in reality delivering grey energy to their customers. Blockchain technology has proven itself to be a robust paying system in which users transact money without the involvement of a third party. Blockchain tokens can be used to represent a unit of energy and, just as GoOs, be submitted to the market. This paper focuses on simulating marketplace using the ethereum blockchain and smart contracts, where prosumers can sell tokenized GoOs to consumers willing to subsidize renewable energy producers. Such markets bypass energy providers by allowing consumers to obtain tokenized GoOs directly from the producers, which in turn benefit directly from the earnings. Two market strategies where tokens are sold as GoOs have been simulated. In the Fix Price Strategy prosumers sell their tokens to the average GoO price of 2014. The Variable Price Strategy focuses on selling tokens at a price range defined by the difference between grey and green energy. The study finds that the ethereum blockchain is robust enough to functions as a platform for tokenized GoO trading. Simulation results have been compared and the results indicate that prosumers earn significantly more money by following the Variable Price
Strategy.
IGBT modules with anti-parallel FWDs are widely used in inductive load switching power applications, such as motor drive applications. Nowadays there is a continuous effort to increase the efficiency of such systems by decreasing their switching losses. This paper addresses the problems arising in the turn-on process of an IGBT working in hard-switching conditions. A method is proposed which achieves – contrary to most other approaches – a high switching speed and, at the same time, a low peak reverse-recovery current. This is done by applying an improved gate current waveform that is briefly lowered during the turn-on process. The proposed method achieves low switching losses. Its effectiveness is demonstrated by experimental results with IGBT modules for 600V and 1200V.
This paper addresses the turn-on switching process of insulated-gate bipolar transistor (IGBT) modules with anti-parallel free-wheeling diodes (FWD) used in inductive load switching power applications. An increase in efficiency, i.e. decrease in switching losses, calls for a fast switching process of the IGBT, but this commonly implies high values of the reverse-recovery current overshoot. To overcome this undesired behaviour, a solution was proposed which achieves an independent control of the collector current slope and peak reverse recovery current by applying a gate current that is briefly turned negative during the turn-on process. The feasibility of this approach has already been shown, however, a sophisticated control method is required for applying it in applications with varying currents, temperature and device parameters. In this paper a solution based on an adaptive, iterative closed-loop ontrol is proposed. Its effectiveness is demonstrated by experimental results from a 1200 V/200A IGBT power module for different load currents and reverse-recovery current overshoots.
The presented research is dedicated to estimation of the correlation between the level of renewable energy sources and the costs of congestion management in electric networks in selected European countries. Data of six countries in North-West European area (Italy, Spain, Germany, France, Poland and Austria) were investigated. Factors considered included grid congestion costs including re-dispatching costs as well as countertrading costs, gross electricity generation, installed capacity of electric generating facilities, installed capacity of electric non-dispatchable renewable energy sources and total electricity consumption. Special attention is paid to the share of renewable energy sources. It is found that the grid congestion costs are not clearly affected by penetration of non-dispatchable renewables in all the analysed countries and therefore a clear mathematical correlation cannot no be extrapolated with the available data. The results of this research show in general a loose dependency of the grid congestion costs on the penetration of renewables and a strong dependency on the total electrical consumption of the country.
This paper aims at presenting a solution that enables end customers of the energy system to participate in new local micro-energy-markets by providing them with a distributed, decentralized, transparent and secure Peer to Peer (P2P) payment system, which functions automatically applying new concepts of Machine to Machine (M2M) communication technologies. This work was performed within the German project VK_2G, funded by the DBU. The key results were: Providing means to perform microtransactions in a P2P fashion between end consumers and prosumers in local communities at low cost in a transparent and secure manner; Developing a platform with pre-defined smart contracts able to be tailored to different end customers ‘needs in an easy way and; Integrating both the market platform as well as the local control of generation and loads. This solution has been developed, integrated and tested in a laboratory prototype. This paper discusses this solution and presents the results of the first test.
A TLP system with a very low characteristic impedance of 1.5 Ω and a selectable pulse length from 0.5 to 6 μs is presented. It covers the entire operation region of many power semiconductors up to 700 V and 400 A. Ist applicability is demonstrated by determining the Output characteristics for two Cool MOS devices up to destruction.
Modern wide bandgap power devices promise higher power conversion performance if the device can be operated reliably. As switching speed increases, the effects of parasitic ringing become more prominent, causing potentially damaging overvoltages during device turn-off. Estimating the expected additional voltage caused by such ringing enables more reliable designs. In this paper, we present an analytical expression to calculate the expected overvoltage caused by parasitic ringing based on parasitic element values and operating point parameters. Simulations and measurements confirm that the expression can be used to find the smallest rise time of the switches’ drain-source voltage for minimum overvoltage. The given expression also allows the prediction of the trade off overvoltage amplitude in case of faster required rise times.
In recent years, the demand for accurate and efficient 3D body scanning technologies has increased, driven by the growing interest in personalised textile development and health care. This position paper presents the implementation of a novel 3D body scanner that integrates multiple RGB cameras and image stitching techniques to generate detailed point clouds and 3D mesh models. Our system significantly enhances the scanning process, achieving higher resolution and fidelity while reducing the cost, time and effort required for data acquisition and processing. Furthermore, we evaluate the potential use cases and applications of our 3D body scanner, focusing on the textile technology and health sectors. In textile development, the 3D scanner contributes to bespoke clothing production, allowing designers to construct made-to-measure garments, thus minimising waste and enhancing customer satisfaction through fitting clothing. In mental health care, the 3D body scanner can be employed as a tool for body image analysis, providing valuable insights into the psychological and emotional aspects of self-perception. By exploring the synergy between the 3D body scanner and these fields, we aim to foster interdisciplinary collaborations that drive advancements in personalisation, sustainability, and well-being.
Advancing mental health diagnostics: AI-based method for depression detection in patient interviews
(2023)
In this paper, we present a novel artificial intelligence (AI) application for depression detection, using advanced transformer networks to analyse clinical interviews. By incorporating simulated data to enhance traditional datasets, we overcome limitations in data protection and privacy, consequently improving the model’s performance. Our methodology employs BERT-based models, GPT-3.5, and ChatGPT-4, demonstrating state-of-the-art results in detecting depression from linguistic patterns and contextual information that significantly outperform previous approaches. Utilising the DAIC-WOZ and Extended-DAIC datasets, our study showcases the potential of the proposed application in revolutionising mental health care through early depression detection and intervention. Empirical results from various experiments highlight the efficacy of our approach and its suitability for real-world implementation. Furthermore, we acknowledge the ethical, legal, and social implications of AI in mental health diagnostics. Ultimately, our study underscores the transformative potential of AI in mental health diagnostics, paving the way for innovative solutions that can facilitate early intervention and improve patient outcomes.
AI-based prediction and recommender systems are widely used in various industry sectors. However, general acceptance of AI-enabled systems is still widely uninvestigated. Therefore, firstly we conducted a survey with 559 respondents. Findings suggested that AI-enabled systems should be fair, transparent, consider personality traits and perform tasks efficiently. Secondly, we developed a system for the Facial Beauty Prediction (FBP) benchmark that automatically evaluates facial attractiveness. As our previous experiments have proven, these results are usually highly correlated with human ratings. Consequently they also reflect human bias in annotations. An upcoming challenge for scientists is to provide training data and AI algorithms that can withstand distorted information. In this work, we introduce AntiDiscriminationNet (ADN), a superior attractiveness prediction network. We propose a new method to generate an unbiased convolutional neural network (CNN) to improve the fairn ess of machine learning in facial dataset. To train unbiased networks we generate synthetic images and weight training data for anti-discrimination assessments towards different ethnicities. Additionally, we introduce an approach with entropy penalty terms to reduce the bias of our CNN. Our research provides insights in how to train and build fair machine learning models for facial image analysis by minimising implicit biases. Our AntiDiscriminationNet finally outperforms all competitors in the FBP benchmark by achieving a Pearson correlation coefficient of PCC = 0.9601.
The aim of this work is the development of artificial intelligence (AI) application to support the recruiting process that elevates the domain of human resource management by advancing its capabilities and effectiveness. This affects recruiting processes and includes solutions for active sourcing, i.e. active recruitment, pre-sorting, evaluating structured video interviews and discovering internal training potential. This work highlights four novel approaches to ethical machine learning. The first is precise machine learning for ethically relevant properties in image recognition, which focuses on accurately detecting and analysing these properties. The second is the detection of bias in training data, allowing for the identification and removal of distortions that could skew results. The third is minimising bias, which involves actively working to reduce bias in machine learning models. Finally, an unsupervised architecture is introduced that can learn fair results even without ground truth data. Together, these approaches represent important steps forward in creating ethical and unbiased machine learning systems.
3D assisted 2D face recognition involves the process of reconstructing 3D faces from 2D images and solving the problem of face recognition in 3D. To facilitate the use of deep neural networks, a 3D face, normally represented as a 3D mesh of vertices and its corresponding surface texture, is remapped to image-like square isomaps by a conformal mapping. Based on previous work, we assume that face recognition benefits more from texture. In this work, we focus on the surface texture and its discriminatory information content for recognition purposes. Our approach is to prepare a 3D mesh, the corresponding surface texture and the original 2D image as triple input for the recognition network, to show that 3D data is useful for face recognition. Texture enhancement methods to control the texture fusion process are introduced and we adapt data augmentation methods. Our results show that texture-map-based face recognition can not only compete with state-of-the-art systems under the same precon ditions but also outperforms standard 2D methods from recent years.
In recent years, 3D facial reconstructions from single images have garnered significant interest. Most of the approaches are based on 3D Morphable Model (3DMM) fitting to reconstruct the 3D face shape. Concurrently, the adoption of Generative Adversarial Networks (GAN) has been gaining momentum to improve the texture of reconstructed faces. In this paper, we propose a fundamentally different approach to reconstructing the 3D head shape from a single image by harnessing the power of GAN. Our method predicts three maps of normal vectors of the head’s frontal, left, and right poses. We are thus presenting a model-free method that does not require any prior knowledge of the object’s geometry to be reconstructed.
The key advantage of our proposed approach is the substantial improvement in reconstruction quality compared to existing methods, particularly in the case of facial regions that are self-occluded in the input image. Our method is not limited to 3d face reconstruction. It is generic and applicable to multiple kinds of 3D objects. To illustrate the versatility of our method, we demonstrate its efficacy in reconstructing the entire human body.
By delivering a model-free method capable of generating high-quality 3D reconstructions, this paper not only advances the field of 3D facial reconstruction but also provides a foundation for future research and applications spanning multiple object types. The implications of this work have the potential to extend far beyond facial reconstruction, paving the way for innovative solutions and discoveries in various domains.
Facial beauty prediction (FBP) aims to develop a machine that automatically makes facial attractiveness assessment. In the past those results were highly correlated with human ratings, therefore also with their bias in annotating. As artificial intelligence can have racist and discriminatory tendencies, the cause of skews in the data must be identified. Development of training data and AI algorithms that are robust against biased information is a new challenge for scientists. As aesthetic judgement usually is biased, we want to take it one step further and propose an Unbiased Convolutional Neural Network for FBP. While it is possible to create network models that can rate attractiveness of faces on a high level, from an ethical point of view, it is equally important to make sure the model is unbiased. In this work, we introduce AestheticNet, a state-of-the-art attractiveness prediction network, which significantly outperforms competitors with a Pearson Correlation of 0.9601. Additionally, we propose a new approach for generating a bias-free CNN to improve fairness in machine learning.
The current paper discusses the optimal choice of a filter time constant for filtering the steady state flux reference in an energy efficient control strategy for changing load torques. It is shown that by appropriately choosing the filter time constant as a fraction of the rotor time constant the instantaneous power losses after a load torque step can be significantly reduced compared to the standard case. The analysis for the appropriate choice of the filter time constant is based on a numerical study for three different induction motors with different rated powers.
Steady state efficiency optimization techniques for induction motors are state of the art and various methods have already been developed. This paper provides new insights in the efficiency optimized operation in dynamic regime. The paper proposes an anticipative flux modification in order to decrease losses during torque and speed transients. These trajectories are analyzed based on a numerical study for different motors. Measurement results for one motor are given as well.
Energy efficient electric control of drives is more and more important for electric mobility and manufacturing industries. Online dynamic optimization of induction machines is challenging due to the computational complexity involved and the variable power losses during dynamic operation of induction machines. This paper proposes a simple technique for sub-optimal online loss optimization using rotor flux linkage templates for energy efficient dynamic operation of induction machines. Such a rotor flux linkage template is given by a rotor flux linkage trajectory which is optimal for a specific scenario. This template is calculated in an offline optimization process. For a specific scenario during real time operation the rotor flux linkage is calculated by appropriately scaling the given template.
This paper discusses the optimal control problem for increasing the energy efficiency of induction machines in dynamic operation including field weakening regime. In an offline procedure optimal current and flux trajectories are determined such that the copper losses are minimized during transient operations. These trajectories are useful for a subsequent online implementation.
An experimental study of a zero voltage switching SiC boost converter with an active snubber network
(2015)
This paper presents a quasi-resonant, zero voltage switching (ZVS) SiC boost converter for an output power of up to 10 kW. The converter is realized with an easily controllable active snubber network that allows a reduction of switching losses by minimizing the voltage stress applied to the active switch. With this approach, an increase of the switching frequency is possible, allowing a reduction of the system size. Experiments show a maximum converter efficiency up to 99.2% for a switching frequency of 100 kHz. A second version of the converter enables a further size reduction by increasing the switching frequency to 300 kHz while still reaching a high efficiency up to 98.4 %.
Gallium nitride high electron mobility transistors (GaN-HEMTs) have low capacitances and can achieve low switching losses in applications where hard turn-on is required. Low switching losses imply a fast switching; consequently, fast voltage and current transients occur. However, these transients can be limited by package and layout parasitics even for highly optimized systems. Furthermore, a fast switching requires a fast charging of the input capacitance, hence a high gate current.
In this paper, the switching speed limitations of GaN-HEMTs due to the common source inductance and the gate driver supply voltage are discussed. The turn-on behavior of a GaN-HEMT is simulated and the impact of the parasitics and the gate driver supply voltage on the switching losses is described in detail. Furthermore, measurements are performed with an optimized layout for a drain-source voltage of 500 V and a drain-source current up to 60 A.
Modern power semiconductor devices have low capacitances and can therefore achieve very fast switching transients under hard-switching conditions. However, these transients are often limited by parasitic elements, especially by the source inductance and the parasitic capacitances of the power semiconductor. These limitations cannot be compensated by conventional gate drivers. To overcome this, a novel gate driver approach for power semiconductors was developed. It uses a transformer which accelerates the switching by transferring energy from the source path to the gate path.
Experimental results of the novel gate driver approach show a turn-on energy reduction of 78% (from 80 μJ down to 17 μJ) with a drain-source voltage of 500V and a drain current of 60 A. Furthermore, the efficiency improvement is demonstrated for a hard-switching boost converter. For a switching frequency of 750 kHz with an input voltage of 230V and an output voltage of 400V, it was possible to extend the output power range by 35%(from 2.3kW to 3.1 kW), due to the reduction of the turn-on losses, therefore lowering the junction temperature of the GaN-HEMT.
The experimental characterization of the thermal impedance Zth of large power MOSFETs is commonly done by measuring the junction temperature Tj in the cooling phase after the device has been heated, preferably to a high junction temperature for increased accuracy. However, turning off a large heating current (as required by modern MOSFETs with low on-state resistances) takes some time because of parasitic inductances in the measurement system. Thus, most setups do not allow the characterization of the junction temperature in the time range below several tens of μs.
In this paper, an optimized measurement setup is presented which allows accurate Tj characterization already 3 μs after turn-off of heating. With this, it becomes possible to experimentally investigate the influence of thermal capacitances close to the active region of the device. Measurement results will be presented for advanced power MOSFETs with very large heating currents up to 220 A. Three bonding variants are investigated and the observed differences will be explained.
A gate driver approach is presented for the reduction of turn-on losses in hard switching applications. A significant turn-on loss reduction of up to 55% has been observed for SiCMOSFETs. The gate driver approach uses a transformer which couples energy from the power path back into the gate path during switching events, providing increased gate driver current and thereby faster switching speed.
The gate driver approach was tested on a boost converter running at a switching frequency up to 300 kHz. With an input voltage of 300V and an output voltage of 600V, it was possible to reduce the converter losses by 8% at full load. Moreover, the output power range could be extended by 23% (from 2.75kW to 3.4 kW) due to the reduction of the turn-on losses.
The loss contribution of a 2.3kW synchronous GaN-HEMT boost converter for an input voltage of 250V and an output voltage of 500V was analyzed. A simulation model which consists of two parts is introduced. First, a physics-based model is used to determine the switching losses. Then, a system simulation is applied to calculate the losses of the specific elements. This approach allows a fast and accurate system evaluation as required for further system optimization.
In this work, a hard- and a zero-voltage turn-on switching converter are compared. Measurements were performed to verify the simulation model, showing a good agreement. A peak efficiency of 99% was achieved for an output power of 1.4kW. Even with an output power above 400W, it was possible to obtain a system efficiency exceeding 98 %.
This paper presents a compact 3 kW bidirectional GaN-HEMT DC/DC converter for 360V to 400-500 V. A very high efficiency has been reached by applying a zero voltage turn-on in conjunction with a negative gate-source voltage, even though normally-off HEMTs are used. Further improvements were achieved by adapting the switching frequency to the load current and output voltage, as will be explained by means of the loss contribution of the specific elements for a constant and an adaptive switching frequency. Measurements have shown a high converter efficiency exceeding 99% over a wide output power range of up to 3 kW.
Perforations of the tympanic membrane (TM) can occur as a result of injury or inflammation of the middle ear. These perforations can lead to conductive hearing loss (HL), where in some cases the magnitude of HL exceeds that attributable to the observed TM perforation alone. We aim with this study to better understand the effects of location and size of TM perforations on the sound transmitting properties of the middle ear.
The middle ear transfer function (METF) of six human temporal bones (TB; freshly frozen specimen of body donors) were compared before and after perforation of the TM at different locations (anterior or posterior lower quadrant) and of different sizes (1mm, ¼ of the TM, ½ of the TM, and full ablation). The
METF were correlated with a Finite Element (FE) model of the middle ear, in which similar alterations were simulated.
The measured and simulated FE model METFs exhibited frequency and perforation size dependent amplitude losses at all locations and severities. In direct comparison, posterior TM perforations affected the transmission properties to a larger degree than perforations of the anterior quadrant. This could possibly be caused by an asymmetry of the TM, where the malleus-incus complex rotates and results in larger deflections in the posterior TM half than in the anterior TM half. The FE model of the TM with a sealed cavity suggest that small perforations result in a decrease of TM rigidity and thus to an increase in oscillation amplitude of the TM, mostly above 1 kHz.
The location and size of TM perforations influence the METF in a reproducible way. Correlating our data with the FE model could help to better understand the pathologic mechanisms of middle-ear diseases. If small TM perforations with uncharacteristically significant HL are observed in daily clinical practice, additional middle ear pathologies should be considered. Further investigations on the loss of TM pretension due to perforations may be informative.
A fast transient current-mode buckboost DC-DC converter for portable devices is presented. Running at 1 MHz the converter provides stable 3 V from a 2.7 V to 4.2 V Li-Ion battery. A small voltage under-/overshoot is achieved by fast transient techniques: (1) adaptive pulse skipping (APS) and (2) adaptive compensation capacitance (ACC). The proposed converter was implemented in a 0.25 μm CMOS technology. Load transient simulations confirm the effectiveness of APS and ACC. The improvement in voltage undershoot and response time at light-to-heavy load step (100 mA to 500 mA), are 17 % and 59 %, respectively, in boost mode and 40 % and 49 %, respectively, in buck mode. Similar results are achieved at heavy-to-light load step for overshoot and response time.
In this article an energy harvesting system for measuring the wind speed starting from 2 m/s (about 2 Bft) is presented, which uses the same source for measuring and supplying power (energy autarkic). The use of the same source for measurement and power supply increases the number of potential applications since needed power is present with the measuring signal. For the case of measuring the wind velocity, one might consider applications in tunnels, tubes, pipelines, air conditioning or for controlling clogging of filters. Bluetooth Low Energy (BLE) is chosen as radio technology, since it provides the possibility to realize a unidirectional communication; requiring only a single telegram (advertising telegram) for sending the measured value. A more complex establishment of communication required by WLAN or 6LoWPAN could therefore be avoided to significantly reduce the overall energy consumption. Since the advertisement telegram does not make any provision for security or against hacking in general, a security concept is presented which includes encryption and resilience against replay attacks in a unidirectional communication system.
To facilitate the presented concepts beyond wind sensors, the system is divided into three major modules namely the generator-sensor module, the radio module and the energy management module. Whereas the first two might be changed in different applications the energy management module could be reused in many different applications. It supplies and stores the needed energy and switches power on and off in a deterministic way to ensure the radio module can operate correctly.
This paper investigates the evaluation of dense 3D face reconstruction from a single 2D image in the wild. To this end, we organise a competition that provides a new benchmark dataset that contains 2000 2D facial images of 135 subjects as well as their 3D ground truth face scans. In contrast to previous competitions or challenges, the aim of this new benchmark dataset is to evaluate the accuracy of a 3D dense face reconstruction algorithm using real, accurate and high-resolution 3D ground truth face scans. In addition to the dataset, we provide a standard protocol as well as a Python script for the evaluation. Last, we report the results obtained by three state-of-the-art 3D face reconstruction systems on the new benchmark dataset. The competition is organised along with the 2018 13th IEEE Conference on Automatic Face & Gesture Recognition.
Micro grids often consist of energy generators, storages and consumers with controllers which are not prepared for their integration into communication networks for energy systems. In this paper it will be presented, how standards from the field of energy automation can be applied in such controllers. The data for communication interfaces can be structured according to the IEC 61850- or the VHPREADY standard. It is investigated which requirements must be supported to implement such data models within the controllers. For the transmission of the data we propose the OPC UA protocol, which supports extensive security measures and which is today available for nearly all modern types of controllers and computers.
A wide-bandwidth galvanically isolated current sensing circuit with an integrated Rogowski coil in 180nm CMOS is presented. Exploiting the high-frequency properties of an optimized on-chip Rogowski coil, currents can be measured up to a bandwidth of 75 MHz. The analog sensor front-end comprises a two-stage integrator, which allows a chopper frequency below signal bandwidth, resulting in 2.2 mVrms output noise. An additional integrated Hall sensor extends the measurement range towards DC.
A 20 V, 8 MHz resonant DCDC converter with predictive control for 1 ns resolution soft-switching
(2015)
Fast switching power supplies allow to reduce the size and cost of external passive components. However, the capacitive switching losses of the power stage will increase and become the dominant part of the total losses. Therefore, resonant topologies are the known key to reduce the losses of the power stage. A power switch with an additional resonant circuit can be turned on under soft-switching conditions, ideally with zero-voltage-switching (ZVS). As conventional resonant converts are only efficient for a constant load, this paper presents a predictive regulation loop to approach soft-switching conditions under varying load and component tolerances. A sample and hold based detection circuit is utilized to control the turn-on of the power switch by a digital regulation. The proposed design was fabricated in a 180 nm high-voltage BiCMOS technology. The efficiency of the converter was measured to be increased by up to 16 % vs. worst case timing and by 13 % compared to a conventional hard-switching buck converter at 20 V input voltage and at approximately 8 MHz switching frequency.
The majority of people in sub-Saharan Africa (SSA) rely on so-called “paratransit” for their mobility needs. The term refers to a large informal transport sector that runs independent of government, of which 83% comprises minibus taxis (MBT). MBT technology is often old and contribute significantly to climate change with their high carbon dioxide (CO2) emissions. Issues related to sustainability and climate change are becoming more important world-wide and hardly any attention is given to MBTs. Converting the MBTs from internal combustion engines (ICEs) to electric motors could be a possible solution. The existing power grid in SSA is largely based on fossil power plants and is unstable. This can be seen by frequent local power blackouts. To avoid further strain on the existing power grid, it would therefore make sense to charge the electric minibus taxis (eMBTs) through a grid consisting of renewable energies. A mobility map is created via simulations with collected data points of the MBTs. By using this mobility map, the energy demand of the eMBTs is calculated. Furthermore, a region-specific photovoltaic (PV) and wind simulation can be realised based on existing weather data, and a tool to size the supply system to charge the eMBTs is developed after all data has been collected. With the help of this work, it can be determined to what extent renewable energies such as PV and wind power can be used to support the transition from ICEs to electric engines in the MBT sector.
Nowadays robust, energy-efficient multisensor microsystems often come with heavily restricted power budgets and the characteristic of remaining in certain states for a longer period of time. During this time frame there is no continuous clock signal required which gives the opportunity to suspend the clock until a new transition is requested. In this paper, we present a new topology for on-demand locally clocked finite state machines. The architecture combines a local adaptive clocking approach with synchronous and asynchronous components forming a quasi synchronous system. Using adaptive and local clocking comes with the advantages of reducing the power consumption while saving design effort when no global clock tree is needed. Combining synchronous and asynchronous components is beneficial compared to previous fully asynchronous approaches concerning the design restrictions. The developed topology is verified by the implementation and simulation of a temperature-ADC sensor system realized in a 180 nm process.
A generic, knowledge-based method for automatic topology selection of analog circuits in a predefined analog reuse library is presented in this paper on the OTA (Operational Transconductance Amplifier) example. Analog circuits of a given circuit class are classified in a topology tree, where each node represents a specific topology. Child nodes evolve from their parent nodes by an enhancement of the parent node’s topological structure. Topology selection is performed by a depth first-search in the topology tree starting at the root node, thus checking topologies of increasing complexity. The decisions at each node are based on solving equations or – if this is not possible – on simulations. The search ends at the first (and thus the simplest) topology which can meet the specification after an adequate circuit sizing. The advantages of the generic, tree based topology selection method presented in this paper are shown in comparison to a pool selection method and to heuristic approaches. The selection is based on an accomplished chip investigation.
We present a new methodology for automatic selection and sizing of analog circuits demonstrated on the OTA circuit class. The methodology consists of two steps: a generic topology selection method supported by a “part-sizing” process and subsequent final sizing. The circuit topologies provided by a reuse library are classified in a topology tree. The appropriate topology is selected by traversing the topology tree starting at the root node. The decision at each node is gained from the result of the part-sizing, which is in fact a node-specific set of simulations. The final sizing is a simulation-based optimization. We significantly reduce the overall simulation effort compared to a classical simulation-based optimization by combining the topology selection with the part-sizing process in the selection loop. The result is an interactive user friendly system, which eases the analog designer’s work significantly when compared to typical industrial practice in analog circuit design. The topology selection method and sizing process are implemented as a tool into a typical analog design environment. The design productivity improvement achievable by our method is shown by a comparison to other design automation approaches.