Refine
Document Type
- Conference proceeding (273)
- Journal article (153)
- Book chapter (23)
- Book (22)
- Patent / Standard / Guidelines (15)
- Report (9)
- Doctoral Thesis (7)
- Working Paper (5)
- Anthology (2)
Is part of the Bibliography
- yes (509)
Institute
- Technik (509) (remove)
Publisher
- IEEE (141)
- VDE Verlag (42)
- Springer (34)
- Elsevier (25)
- Hochschule Ulm (12)
- Public Verlagsgesellschaft und Anzeigenagentur (11)
- Hochschule Reutlingen (9)
- Association for Computing Machinery (8)
- Hanser (7)
- MDPI (7)
As fuel prices climb and the global automotive sector migrates to more sustainable vehicle technologies, the future of South Africa’s minibus taxis is in flux. The authors’ previous research has found that battery electric technology struggles to meet all the mobility requirements of minibus taxis. They investigate the technical feasibility of powering taxis with hydrogen fuel cells instead. The following results are projected using a custom-built simulator, and tracking data of taxis based in Stellenbosch, South Africa. Each taxi requires around 12 kg of hydrogen gas per day to travel an average distance of 360 km. 465 kWh of electricity, or 860 m2 of solar panels, would electrolyse the required green hydrogen. An economic analysis was conducted on the capital and operational expenses of a system of ten hydrogen taxis and an electrolysis plant. Such a pilot project requires a minimum investment of € 3.8 million (R 75 million), for a 20 year period. Although such a small scale roll-out is technically feasible and would meet taxis’ performance requirements, the investment cost is too high, making it financially unfeasible. They conclude that a large scale solution would need to be investigated to improve financial feasibility; however, South Africa’s limited electrical generation capacity poses a threat to its technical feasibility. The simulator is uploaded at: https://gitlab.com/eputs/ev-fleet-sim-fcv-model.
Most Question-answering (QA) systems rely on training data to reach their optimal performance. However, acquiring training data for supervised systems is both time-consuming and resource-intensive. To address this, in this paper, we propose TFCSG, an unsupervised similar question retrieval approach that leverages pre-trained language models and multi-task learning. Firstly, topic keywords in question sentences are extracted sequentially based on a latent topic-filtering algorithm to construct unsupervised training corpus data. Then, the multi-task learning method is used to build the question retrieval model. There are three tasks designed. The first is a short sentence contrastive learning task. The second is the question sentence and its corresponding topic sequence similarity judgment task. The third is using question sentences to generate their corresponding topic sequence task. The three tasks are used to train the language model in parallel. Finally, similar questions are obtained by calculating the cosine similarity between sentence vectors. The comparison experiment on public question datasets that TFCSG outperforms the comparative unsupervised baseline method. And there is no need for manual marking, which greatly saves human resources.
Analog-/Mixed-Signal (AMS) design verification is one of the most challenging and time consuming tasks of todays complex system on chip (SoC) designs. In contrast to digital system design, AMS designers have to deal with a continuous state space of conservative quantities, highly nonlinear relationships, non-functional influences, etc. enlarging the number of possibly critical scenarios to infinity. In this special session we demonstrate the verification of functional properties using simulative and formal methods. We combine different approaches including automated abstraction and refinement of mixed-level models, state-space discretization as well as affine arithmetic. To reach sufficient verification coverage with reasonable time and effort, we use enhanced simulation schemes to avoid conventional simulation drawbacks.
Pegelumsetzer mit einem ersten Eingang, der ein erstes Signal erfasst, wobei das erste Signal einen ersten Spannungspegel aufweist, einem Ausgang, der ein zweites Signal erzeugt, wobei das zweite Signal einen zweiten Spannungspegel aufweist, wobei der zweite Spannungspegel größer als der erste Spannungspegel ist und einem Differenzverstärker, der eine Differenzspannung erfasst, wobei der Differenzverstärker mit einer Versorgungsspannung und einer hochseitige Masse verbunden ist, wobei die Versorgungsspannung ein erstes Spannungspotential und die hochseitige Masse ein zweites Spannungspotential aufweist, dadurch gekennzeichnet, dass der erste Eingang mit einer ersten Teilschaltung verbunden ist, wobei die erste Teilschaltung mit einer zweiten Teilschaltung unidirektional verbunden ist, wobei die zweite Teilschaltung mit der Versorgungsspannung und der hochseitigen Masse verbunden ist, wobei die zweite Teilschaltung mindestens zwei Ausgänge aufweist, die die Differenzspannung des Differenzverstärkers erzeugen, wobei über einen Versorgungsspannungseingang und einen hochseitigen Masseeingang eine zusätzliche Spannung einkoppelt und der Differenzverstärker das zweite Signal in Abhängigkeit der Differenzspannung, der Versorgungsspannung, der hochseitigen Masse und der zusätzlichen Spannung erzeugt.
Die vorliegende Erfindung betrifft ein Verfahren zur Regelung einer Totzeit in einem Synchronwandler (100), in welchem ein zyklisches Schalten eines Steuerschalters (2) und eines Synchronschalters (3) erfolgen, wobei der Steuerschalter (2) mittels eines ersten Schaltsignals (S1) und der Synchronschalter (3) mittels eines zweiten Schaltsignals (S2) geschaltet werden. Das Verfahren umfasst ein Erfassen und Vorhalten eines Spannungswertes, welcher eine Spannung (VSW) über den Synchronschalter (3) zu einem bestimmten Zeitpunkt beschreibt, und ein Anpassen des ersten und/oder zweiten Schaltsignals (S1, S2) für einen folgenden Zyklus basierend auf dem vorgehaltenen Spannungswert.
An integrated synchronous buck converter with a high resolution dead time control for input voltages up to 48V and 10MHz switching frequency is presented. The benefit of an enhanced dead time control at light loads to enable zero voltage switching at both the high-side and low-side switch at low output load is studied. This way, compact multi-MHz DCDC converters can be implemented at high efficiency over a wide load current range. The concept also eliminates body diode forward conduction losses and minimizes reverse recovery losses. A dead time resolution of 125 ps is realized by an 8-bit differential delay chain. A further efficiency enhancement by soft switching at the high-side switch at light load is achieved with a voltage boost of the switching node by dead time control in forced continuous conduction mode. The monolithic converter is implemented in an 180nm high-voltage BiCMOS technology. At V IN = 48V, V OUT = 5V, 50mA load, 10MHz switching frequency and 500 nH output inductance, the efficiency is measured to be increased by 14.4% compared to a conventional predictive dead time control. A peak efficiency of 80.9% is achieved at 12V input.
Purpose
Injury or inflammation of the middle ear often results in the persistent tympanic membrane (TM) perforations, leading to conductive hearing loss (HL). However, in some cases the magnitude of HL exceeds that attributable by the TM perforation alone. The aim of the study is to better understand the effects of location and size of TM perforations on the sound transmission properties of the middle ear.
Methods
The middle ear transfer functions (METF) of six human temporal bones (TB) were compared before and after perforating the TM at different locations (anterior or posterior lower quadrant) and to different degrees (1 mm, ¼ of the TM, ½ of the TM, and full ablation). The sound-induced velocity of the stapes footplate was measured using single-point laser-Doppler-vibrometry (LDV). The METF were correlated with a Finite Element (FE) model of the middle ear, in which similar alterations were simulated.
Results
The measured and calculated METF showed frequency and perforation size dependent losses at all perforation locations. Starting at low frequencies, the loss expanded to higher frequencies with increased perforation size. In direct comparison, posterior TM perforations affected the transmission properties to a larger degree than anterior perforations. The asymmetry of the TM causes the malleus-incus complex to rotate and results in larger deflections in the posterior TM quadrants than in the anterior TM quadrants. Simulations in the FE model with a sealed cavity show that small perforations lead to a decrease in TM rigidity and thus to an increase in oscillation amplitude of the TM mainly above 1 kHz.
Conclusion
Size and location of TM perforations have a characteristic influence on the METF. The correlation of the experimental LDV measurements with an FE model contributes to a better understanding of the pathologic mechanisms of middle-ear diseases. If small perforations with significant HL are observed in daily clinical practice, additional middle ear pathologies should be considered. Further investigations on the loss of TM pretension due to perforations may be informative.
The design process for a single phase, smart, universal charger for light electric vehicles, is presented. With a step up, power factor correction circuit, followed by a phase shifted, full bridge converter, with synchronous rectification on the secondary side. Due to the resistor-capacitor-diode snubber on the secondary side, the current peak at the start of power transfer, leads to false triggering during light load control with peak current mode control. The solution developed for light loads, is to change from peak current control to voltage control. This is achieved by limiting the maximum phase shift, instead of changing the reference value. For the power factor correction stage, measured and calculated efficiencies are compared as a function of the output power. The voltage and current waveforms are shown for the power factor correction circuit, and for the phase shifted bridge, the measured current waveform is compared with simulation.
Electromigration (EM) is becoming a progressively severe reliability challenge due to increased interconnect current densities. A shift from traditional (post-layout) EM verification to robust (pro-active) EM aware design - where the circuit layout is designed with individual EM-robust solutions - is urgently needed. This tutorial will give an overview of EM and its effects on the reliability of present and future integrated circuits (ICs). We introduce the physical EM process and present its specific characteristics that can be affected during physical design. Examples of EM countermeasures which are applied in today’s commercial design flows are presented. We show how to improve the EM-robustness of metallization patterns and we also consider mission proiles to obtain application-oriented current density limits. The increasing interaction of EM with thermal migration is investigated as well. We conclude with a discussion of application examples to shift from the current post layout EM verification towards an EM aware physical design process. Its methodologies, such as EM-aware routing, increase the EM-robustness of the layout with the overall goal of reducing the negative impact of EM on the circuit’s reliability.
Modern production systems are characterized by the increasingly use of CPS and IoT networks. However, processing the available information for adaptation and reconfiguration often occurs in relatively large time cycles. It thus does not take advantage of the optimization potential available in the short term. In this paper, a concept is presented that, considering the process information of the individual heterogeneous system elements, detects optimization potentials and performs or proposes adaptation or reconfiguration. The concept is evaluated utilizing a case study in a learning factory. The resulting system thus enables better exploitation of the potentials of the CPPS.
In this article feedback linearization for control-affine nonlinear systems is extended to systems where linearization is not feasible in the complete state space by combining state feedback linearization and homotopy numerical continuation in subspaces of the phase space where feedback linearization fails. Starting from the conceptual simplicity of feedback linearization, this new method expands the scope of their applicability to irregular systems with poorly expressed relative degree. The method is illustrated on a simple SISO–system and by controlling the speed and the rotor flux linkage in a three phase induction machine.
Methods for increasing the energy efficiency of induction motors by an appropriate control strategy have been a subject of research during the last years. Several methods for loss minimization have been developed for induction motors operated in a steady state. In recent years, some solutions for the dynamic case have been given as well either using an online or offline optimization approach, implying a certain computational burden, which is undesired in practice. This paper shows that the appropriate application of steady state techniques during transients due to a changing motor torque is a suboptimal strategy with an acceptable performance for efficiency optimization given an induction machine where saturation effects of the main inductance must be considered. The optimization problem is simplified such that a simple suboptimal solution is possible and the quality of the suboptimal solution is investigated by simulations and measurements. The proposed solution is simple, easy to implement, and does not require an online optimization. In addition, the influence of magnetizing induction saturation is considered.
This paper introduces a novel placement methodology for a common-centroid (CC) pattern generator. It can be applied to various integrated circuit (IC) elements, such as transistors, capacitors, diodes, and resistors. The proposed method consists of a constructive algorithm which generates an initial, close to the optimum, solution, and an iterative algorithm which is used subsequently, if the output of constructive algorithm does not satisfy the desired criteria. The outcome of this work is an automatic CC placement algorithm for IC element arrays. Additionally, the paper presents a method for the CC arrangement evaluation. It allows for evaluating the quality of an array, and a comparison of different placement methods.
The hotspot detection has received much attention in the recent years due to a substantial mismatch between lithography wavelength and semiconductor technology feature size. This mismatch causes diffraction when transferring the layout from design onto a silicon wafer. As a result, open or short circuits (i.e. lithography hotspots) are more likely to be produced. Additionally, increasing numbers of semiconductors devices on a wafer required more time for the lithography hotspot detection analysis. In this work, we propose a fast and accurate solution based on novel artificial neural network (ANN) architecture for precise lithography hotspot detection using a convolution neural network (CNN) adopting a state of-the-art technique. The experimental results showed that the proposed model gained accuracy improvement over current state-of-theart approaches. The final code has been made publicly available.
Lithographical hotspot (LH) detection using deep learning (DL) has received much attention in the recent years. It happens mainly due to the facts the DL approach leads to a better accuracy over the traditional, state-of-the-art programming approaches. The purpose of ths study is to compare existing data augmentation (DA) techniques for the integrated circuit (IC) mask data using DL methods. DA is a method which refers to the process of creating new samples similar to the training set, thereby helping to reduce the gap between classes as well as improving the performance of the DL system. Experimental results suggest that the DA methods increase overall DL models performance for the hotspot detection tasks.
Patterns are virtually simulated in 3D CAD programs before production to check the fit. However, achieving lifelike representations of human avatars, especially regarding soft tissue dynamics, remains challenging. This is mainly since conventional avatars in garment CAD programs are simulated with a continuous hard surface and not corresponding to the human physical and mechanical body properties of soft tissue. In the real world, the human body’s natural shape is affected by the contact pressure of tight-fitting textiles. To verify the fit of a simulated garment, the interactions between the individual body shape and the garment must be considered. This paper introduces an innovative approach to digitising the softness of human tissue using 4D scanning technology. The primary objective of this research is to explore the interactions between tissue softness and different compression levels of apparel, exerting pressure on the tissue to capture the changes in the natural shape. Therefore, to generate data and model an avatar with soft body physics, it is essential to capture the deform ability and elasticity of the soft tissue and map it into the modification options for a simulation. To aim this, various methods from different fields were researched and compared to evaluate 4D scanning as the most suitable method for capturing tissue deformability in vivo. In particular, it should be considered that the human body has different deformation capabilities depending on age, the amount of muscle and body fat. In addition, different tissue zones have different mechanical properties, so it is essential to identify and classify them to back up these properties for the simulation. It has been shown that by digitising the obtained data of the different defined applied pressure levels, a prediction of the deformation of the tissue of the exact person becomes possible. As technology advances and data sets grow, this approach has the potential to reshape how we verify fit digitally with soft avatars and leverage their realistic soft tissue properties for various practical purposes.
Purpose: Interpretive research in management accounting and control provides rich insights from empirically based studies, but it has been criticised for lacking generalisability and potential subjectivity. On the latter, triangulation is useful, and this paper aims to offer some insights on a triangulation technique thus far not commonly reported in management accounting/control research.
Design/methodology/approach: Drawing on a study of the roles of management accountants in performance management systems, this paper offers some insights from empirical experiences on the use of concept maps as a tool to assist triangulation and improve understanding of complex empirical phenomena.
Findings: The concept maps as utilised revealed additional insights which were not recounted by interviewees during the normal interview time. This is a potentially important finding for consideration of future researchers.
Practical implications: In this paper, how concept maps were used is detailed, and it is hoped that future researchers will find their use beneficial in interview settings.
Originality/value: Thus far, concept maps seem under-utilised in management accounting and control research. This paper gives some initial insights on how they may be used in case study settings.
Projektbasiertes Lernen (PBL) ist eine ideale Methode, um Studierenden an Hochschulen praktische Projektmanagement-Kompetenzen zu vermitteln. Selbst anspruchsvolle Projekte werden hierdurch möglich. Jedoch ist die Balance zwischen den angestrebten Lernzielen und der praktischen Projektdurchführung in der Hochschulpraxis herausfordernd. Mit Hilfe des ‚PBL-Gold Standards‘ lassen sich PBL-Projekte zielgerichtet entwerfen und auf Effektivität hinsichtlich der Lernziele überprüfen. Am Beispiel des Projekts ‚IP Plane‘ der Hochschule Reutlingen, dem Bau eines Motorflugzeugs durch Studierende, wird die praktische Umsetzung eines PBL-Projektes demonstriert.
Purpose: To develop a method for synthesizing a fuzzy automatic control system for a shearer drum in terms of coal seam hypsometry basing on the information criterion of the beginning of rock cutting-off by the drum to reduce ash content of the extracted coal.
Methodology: Taking into consideration peculiarities of determining a distinct information criterion of the beginning of rock cutting-off by the drum and regularities of its variations during the shearer operation, a fuzzy inference algorithm is developed for a system of fuzzy automatic drum control in terms of seam hypsometry. In this context, rules of fuzzy productions, parameters of the membership functions of terms of the output linguistic variable system, and fuzzy operations are substantiated according to the recommendations of a classic Mamdani fuzzy inference algorithm. Studies are carried out to analyze the effi¬ciency of the proposed fuzzy inference algorithm basing on the introduced relative parameter of the number of effective control actions formed by the fuzzy control system. Simulation modeling makes it possible to perform comparative analysis of the efficiency of the drum control.
Findings: In the course of research, an algorithm of fuzzy control of the shearer’s upper drum in terms of coal seam hypsometry has been developed basing on the determination of direct and inverse transfer from coal breaking near the seam roof by the shearer drum to rock breaking with the help of statistical analysis of the stator power of a cutting drive motor.
Originality: For the first time, a method of synthesis of fuzzy automatic control of the drum in terms of seam hypsometry has been proposed.
Practical value: The proposed method is the theoretical basis to solve important scientific and applied problem of the automation of the coal shearer drum in terms of seam hypsometry to reduce ash content of the produced coal.
The hearing contact lens® (HCL) is a new type of hearing aid devices. One of its main components is a piezo-electric actuator. In order to evaluate and maximize the HCL's performance, a model of the HCL coupled to a middle-ear model was developed using finite element approach. The model was validated step by step starting with the HCL only. To validate the HCL model, vibrational measurements on the HCL were performed using a laser-doppler-vibrometer (LDV). Then, a silicone cap was placed onto the HCL to provide an interface between the HCL and the tympanic membrane of the middle-ear model, and additional LDV measurements on temporal bones were performed to validate the coupled model that was used to evaluate the equivalent sound pressure of the HCL. Moreover, a de-eper insight was gained into the contact between the HCL and tympanic membrane and its effects on the HCL performance. The model can be used to investigate the sensitivity of geometrical and material parameters with respect to performance measures of the HCL and evaluate the feedback behavior.
Hearing contact lens (HCL) is a new type of hearing aid devices. One of its main components is a piezo-electric actuator (PEA). In order to evaluate and maximizethe HCL´s performance, a model of the HCL coupled to the middle ear was developed using finite element (FE)approach. To validate the model, vibrational measurements on the HCL and temporal bones were performed using a Laser-Doppler-Vibrometer (LDV). The model was validated step by step starting with HCL only. Then a silicone cap was fitted onto the HCL to provide an interface between the HCL and the tympanic membrane. The HCL was placed on the tympanic membrane and additional measurements were performed to validate the coupled model. The model was used to evaluate the sensitivity of geometrical and material parameters with respect to performance measures of the HCL. Moreover, deeper insight was gained into the feedback behavior, which causes whistling sounds, and the contact between the HCL and tympanic membrane.
In order to evaluate the performance of different stapes prosthesis types, a coupled finite element (FE) model of human ear was developed. First, the middle-ear FE model was developed and validated using the middle-ear transfer function measurements available in literature including pathological cases. Then, the inner-ear FE model was developed and validated using tonotopy, impedance, and level of cochlea amplification curves from literature. Both models are based on pre-existing research with some improvements and were combined into one coupled FE model. The stapes in the coupled FE ear model was replaced with a model of a stapes prosthesis to create a reconstructed ear model that can be used to estimate how different types of protheses perform relative to each other as well as to the natural ear. This will help in designing of new innovative types of stapes prostheses or any other type of middle-ear prostheses as well as to improve the ones that are already available on the market.
This study describes a non-contact measuring and system identification procedure for evaluating inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament.
This study describes a non-contact measuring and parameter identification procedure designed to evaluate inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament. This method can potentially help to establish a correlation between stiffness and damping characteristics of the annular ligament and inertia properties of the stapes and, thus, help to reduce the number of independent parameters in the model-based hearing diagnosis.
From the perspective of manufacturing companies, the political, media and economic discourse on decarbonisation in the recent years manifests itself as an increasing social expectation of action. In Germany, in particular, this discourse is also being driven forward by powerful companies, respectively sectors, most notably the automotive industry. Against this background, the present paper examines how German manufacturing companies react to rising societal pressure and emerging policies. It examines which measures the companies have taken or plan to take to reduce their carbon footprint, which aspirations are associated with this and the structural characteristics (company size, energy intensity, and sector) by which these are influenced. A mix methods approach is applied, utilising data gathered from approx. 900 companies in context of the Energy Efficiency Index of German Industry (EEI), along with media research focusing on the announced decarbonisation plans and initiatives. We demonstrate that one-size-serves-all approaches are not suitable to decarbonise industry, as the situation and ambitions differ considerably depending on size, energy intensity and sector. Even though the levels of ambition and urgency are high, micro and energy intensive companies, in particular, are challenged. The present research uncovers a series of questions that call for attention to materialise the ambitions and address the challenges outlined.
Urgent action is needed to keep the chance of limiting global warming to 1.5°C or even 2.0°C. Current outlooks by IPCC, and many other organisations forecast that this will be impossible at current pace of emission 'reductions' – Germany has already hit 1.5° warming this year. Across 2019, particularly during the UN New York Climate summit, numerous organisations declared their ambition to become net carbon neutral. Amongst these were investors and companies, including quite a number of German ones.
We apply a mixed methods approach, utilising data gathered from approx. 900 companies after Climate Week in context of the Energy Efficiency Index of German Industry (EEI), along with media research focusing on decarbonisation plans announced and initiatives pledging climate action.
With this, we analyse how German companies in the manufacturing sectors react to rising societal pressure and emerging policies, particularly what measures they have taken or plan to implement to reduce the footprint of their company, their products and their supply chain. In this, we particularly analyse whether and in what way energy- and resource consumption, as well as carbon emissions are considered in the development and lifecycle of goods manufactured. This is of huge relevance as these goods determine the future footprint of buildings, vehicles and industry.
Regarding the supply chain, current articles indicate that small and medium-sized enterprises (SME) are particularly challenged by increasing demands from their large corporate clients and an alleged lack of preparedness to be able to take and afford prompt decarbonisation action themselves (Buchenau et. al. 2019). Notably the automotive industry recently announced new models that will be 100% carbon neutral all the way through (ibid). We thus analyse if and how factors such as company size, energy intensity and sector affiliation influence a company’s plan to fully decarbonize. Ownership structure and corporate culture, it appears, significantly impact on the degree of decarbonisation action underway.
The diversity of energy prosumer types makes it difficult to create appropriate incentive mechanisms that satisfy both prosumers and energy system operators alike. Meanwhile, European energy suppliers buy guarantees of origin (GoO) which allow them to sell green energy at premium prices while in reality delivering grey energy to their customers. Blockchain technology has proven itself to be a robust paying system in which users transact money without the involvement of a third party. Blockchain tokens can be used to represent a unit of energy and, just as GoOs, be submitted to the market. This paper focuses on simulating marketplace using the ethereum blockchain and smart contracts, where prosumers can sell tokenized GoOs to consumers willing to subsidize renewable energy producers. Such markets bypass energy providers by allowing consumers to obtain tokenized GoOs directly from the producers, which in turn benefit directly from the earnings. Two market strategies where tokens are sold as GoOs have been simulated. In the Fix Price Strategy prosumers sell their tokens to the average GoO price of 2014. The Variable Price Strategy focuses on selling tokens at a price range defined by the difference between grey and green energy. The study finds that the ethereum blockchain is robust enough to functions as a platform for tokenized GoO trading. Simulation results have been compared and the results indicate that prosumers earn significantly more money by following the Variable Price
Strategy.
IGBT modules with anti-parallel FWDs are widely used in inductive load switching power applications, such as motor drive applications. Nowadays there is a continuous effort to increase the efficiency of such systems by decreasing their switching losses. This paper addresses the problems arising in the turn-on process of an IGBT working in hard-switching conditions. A method is proposed which achieves – contrary to most other approaches – a high switching speed and, at the same time, a low peak reverse-recovery current. This is done by applying an improved gate current waveform that is briefly lowered during the turn-on process. The proposed method achieves low switching losses. Its effectiveness is demonstrated by experimental results with IGBT modules for 600V and 1200V.
Die vorliegende Erfindung betrifft ein Transmission Line Pulssystem zum Erzeugen eines elektrischen Pulses, sowie ein diesbezügliches Verfahren. Dabei umfasst das Transmission Line Pulssystem: eine Transmission Line, eine Energieversorgungsquelle zum Aufladen der Transmission Line und einen Entladungsschalter zum Auslösen einer Entladung der aufgeladenen Transmission Line, dadurch gekennzeichnet, dass die Transmission Line eine Vielzahl von Einzelsegmenten umfasst, wobei jedes Einzelsegment über ein zugehöriges Einstellglied mit einem gemeinsamen Massepotential elektrisch verbunden ist, und wobei zumindest eines der Einstellglieder einen Einstellkondensator und einen Einstellschalter aufweist.
This paper addresses the turn-on switching process of insulated-gate bipolar transistor (IGBT) modules with anti-parallel free-wheeling diodes (FWD) used in inductive load switching power applications. An increase in efficiency, i.e. decrease in switching losses, calls for a fast switching process of the IGBT, but this commonly implies high values of the reverse-recovery current overshoot. To overcome this undesired behaviour, a solution was proposed which achieves an independent control of the collector current slope and peak reverse recovery current by applying a gate current that is briefly turned negative during the turn-on process. The feasibility of this approach has already been shown, however, a sophisticated control method is required for applying it in applications with varying currents, temperature and device parameters. In this paper a solution based on an adaptive, iterative closed-loop ontrol is proposed. Its effectiveness is demonstrated by experimental results from a 1200 V/200A IGBT power module for different load currents and reverse-recovery current overshoots.
Silicon neurons represent different levels of biological details and accuracies as a trade-off between complexity and power consumption. With respect to this trade-off and high similarity to neuron behaviour models, relaxation-type oscillator circuits often yield a good compromise to emulate neurons. In this chapter, two exemplified relaxation-type silicon neurons are presented that emulate neural behaviour with energy consumption under the scale of nJ/spike. The first proposed fully CMOS relaxation SiN is based on mathematical Izhikevich model and can mimic a broad range of physiologically observable spike patterns. The results of kinds of biologically plausible output patterns and coupling process of two SiNs are presented in 0.35 μm CMOS technology. The second type is a novel ultra-low-frequency hybrid CMOS-memristive SiN based on relaxation oscillators and analog memristive devices. The hybrid SiN directly emulates neuron behaviour in the range of physiological spiking frequencies (less than 100 Hz). The relaxation oscillator is implemented and fabricated in 0.13 μm CMOS technology. An autonomous neuronal synchronization process is demonstrated with two relaxation oscillators coupled by an analog memristive device in the measurement to emulate the synchronous behaviour between spiking neurons.
The presented research is dedicated to estimation of the correlation between the level of renewable energy sources and the costs of congestion management in electric networks in selected European countries. Data of six countries in North-West European area (Italy, Spain, Germany, France, Poland and Austria) were investigated. Factors considered included grid congestion costs including re-dispatching costs as well as countertrading costs, gross electricity generation, installed capacity of electric generating facilities, installed capacity of electric non-dispatchable renewable energy sources and total electricity consumption. Special attention is paid to the share of renewable energy sources. It is found that the grid congestion costs are not clearly affected by penetration of non-dispatchable renewables in all the analysed countries and therefore a clear mathematical correlation cannot no be extrapolated with the available data. The results of this research show in general a loose dependency of the grid congestion costs on the penetration of renewables and a strong dependency on the total electrical consumption of the country.
This paper presents the preliminary results of a setof research projects being developed at the distributed resources laboratory at the University of Reutlingen. The main aim of these projects is to couple distributed ledger technologies (DLTs) with distributed control of microgrids. Firstly, a DLT based solution for a local market platform has been developed. This enables end customers to participate in new local micro-energy-markets by providing them with a distributed, decentralized, transparent and secure Peer to Peer (P2P) payment system. Secondly, this solution has been integrated with an autonomous (agent-based) grid management. The integrated solution of both marked platform as well as agent based control has been implemented and tested in a real microgrid with different distributed components such as PV System, CHP and different kinds of controllable loads. This microgrid is located in the distributed energy resources laboratory at the University of Reutlingen. Thirdly, the resulting solution is being implemented as an easy to customize market solution by AC2SG Software Oy, a Finland based software company, developing solutions for the Indian market. In a next phase, the solution is going to be tested in real environment in off-grids systems in India.
This paper aims at presenting a solution that enables end customers of the energy system to participate in new local micro-energy-markets by providing them with a distributed, decentralized, transparent and secure Peer to Peer (P2P) payment system, which functions automatically applying new concepts of Machine to Machine (M2M) communication technologies. This work was performed within the German project VK_2G, funded by the DBU. The key results were: Providing means to perform microtransactions in a P2P fashion between end consumers and prosumers in local communities at low cost in a transparent and secure manner; Developing a platform with pre-defined smart contracts able to be tailored to different end customers ‘needs in an easy way and; Integrating both the market platform as well as the local control of generation and loads. This solution has been developed, integrated and tested in a laboratory prototype. This paper discusses this solution and presents the results of the first test.
Distributed Ledger Technologies for the energy sector: facilitating interoperability analysis
(2023)
The use of distributed data storage and management structures, such as Distributed Ledger Technologies (DLT), in the energy sector has gained great interest in recent times. This opens up new possibilities in e.g. microgrid management, aggregation of distributed resources, peer-to- peer trading, integration of electromobility or proof-of-origin strategies. However, in order to benefit from those new possibilities, new challenges have to be overcome. This work focuses on one of these challenges, which is the need to ensure interoperability when integrating DLT-enabled devices in energy use cases. Firstly, the use of DLTs in the energy sector will be analyzed and the main use cases will be presented. Then, a classification of DLT-Energy use cases will be proposed. Secondly, the need for a common reference architecture framework to analyze those use cases with a focus on interoperability will be discussed and the current activities in research and standardization in this field will be presented. Finally, a new common reference architecture framework based on current activities in standardization will be presented.
Die vorliegende Erfindung betrifft eine Schaltungsanordnung mit einer Bootstrap-Schaltung, die zumindest eine Hauptkapazität aufweist, von der die erste Seite mit einem ersten Zweig der Schaltungsanordnung und die zweite Seite mit einem auf veränderlichem Potential liegenden zweiten Zweig der Schaltungsanordnung verbunden ist. Die vorgeschlagene Schaltungsanordnung zeichnet sich dadurch aus, dass die Bootstrap-Schaltung parallel zur Hauptkapazität wenigstens eine weitere Kapazität aufweist, die über eine zweite Versorgungsspannung auf eine höhere Spannung aufladbar ist als die Hauptkapazität und über wenigstens ein Schaltelement zur Unterstützung der Hauptkapazität zuschaltbar ist. Bei der vorgeschlagenen Schaltungsanordnung kann in Abhängigkeit von der Dimensionierung der Bootstrap-Kapazitäten eine sehr viel kleinere Fläche mit höherem oder gleich bleibenden Spannungseinbruch oder eine nicht so starke Flächenreduzierung mit kleinerem Spannungseinbruch verglichen mit einer herkömmlichen Bootstrap-Schaltung erzielt werden.
Die Erfindung betrifft einen Energieübertrager (100) zur induktiven Energieübertragung von einem primären Schaltkreis (10) des Energieübertragers (100) an eine erste (5) und eine zweite (15) Spannungsdomäne eines sekundären Schaltkreises (20) des Energieübertragers (100) und zur Informationsübertragung vom sekundären Schaltkreis (20) zum primären Schaltkreis (10). Dabei umfasst der Energieübertrager (100): – einen Transformator (30), über den der primäre Schaltkreis (10) und der sekundäre Schaltkreis (20) induktiv miteinander gekoppelt sind und über den sowohl die Energieübertragung als auch die Informationsübertragung erfolgt; und – ein Amplitudenmodulationsmodul (50) zum Modulieren der Strom- und/oder Spannungsamplitude im sekundären Schaltkreis (20) mit Hilfe eines Amplitudenmodulationsschalters (55), wobei der Amplitudenmodulationsschalter (55) zwischen der ersten (5) und zweiten (15) Spannungsdomäne des sekundären Schaltkreises (20) angeordnet ist und ausgelegt ist, durch Öffnen und Schließen des Amplitudenmodulationsschalters (55) die Strom- und/oder Spannungsamplitude im primären Schaltkreis (10) zu ändern, um somit Information vom sekundären Schaltkreis (20) zum primären Schaltkreis (10) zu übertragen. Die vorliegende Erfindung betrifft ferner einen Gate-Treiber zum Schalten eines Leistungsschalters (500) und ein Verfahren zur induktiven Übertragung von Energie und zur kombinierten Informationsübertragung.
Modern power DMOS transistors greatly benefit from the continuous advances of the technology, which yield devices with very low area-specific RDS,on figures of merit and therefore allow for significantly reduced active areas. However, in many applications, where the devices must dissipate high amounts of energy and thus are subjected to significant self-heating, the active area is not dictated by RDS,on requirements, but by the energy constraints. In this paper, a simple method of improving the energy capability and reliability of power DMOS transistors operating in pulsed conditions is proposed and experimentally verified. The method consists in redistributing the power density from the hotter to the cooler device regions, hence achieving a more homogeneous temperature distribution and a reduced peak temperature. To demonstrate the principle, a simple gate offset circuit is used to redistribute the current density to the cooler DMOS parts. No technology changes are needed for the implementation, only minor changes to the driver circuit are necessary, with a minimal impact on the additional required active area. Improvements in the energy capability from 9.2% up to 39% have been measured. Furthermore, measurements have shown that the method remains effective also if the operating conditions change significantly. The simplicity and the effectiveness of the implementation makes the proposed method suitable to be used in a wide range of applications.
A TLP system with a very low characteristic impedance of 1.5 Ω and a selectable pulse length from 0.5 to 6 μs is presented. It covers the entire operation region of many power semiconductors up to 700 V and 400 A. Ist applicability is demonstrated by determining the Output characteristics for two Cool MOS devices up to destruction.
Modern wide bandgap power devices promise higher power conversion performance if the device can be operated reliably. As switching speed increases, the effects of parasitic ringing become more prominent, causing potentially damaging overvoltages during device turn-off. Estimating the expected additional voltage caused by such ringing enables more reliable designs. In this paper, we present an analytical expression to calculate the expected overvoltage caused by parasitic ringing based on parasitic element values and operating point parameters. Simulations and measurements confirm that the expression can be used to find the smallest rise time of the switches’ drain-source voltage for minimum overvoltage. The given expression also allows the prediction of the trade off overvoltage amplitude in case of faster required rise times.
Um den Übergang von der Schule zur Hochschule zu erleichtern, brauchen Studierende technischer Fächer häufig eine Auffrischung ihrer Kenntnisse in Mathematik und Physik. Ein Online-Lernsystem für Physik kann Studierende bei der Beschäftigung mit physikalischen Inhalten unterstützen. Zudem kann ein Physik-Wissenstest Lücken im individuellen Wissensstand aufzeigen und zum Lernen der fehlenden Themen motivieren. Die Arbeitsgruppe "eLearning in der Physik" der Hochschulföderation Süd-West (HfSW) bestehend aus den baden-württembergischen Hochschulen Aalen, Esslingen, Heilbronn, Mannheim und Reutlingen hat einen Aufgabenpool von über 200 Physikaufgaben für Erstsemester erarbeitet. Sie stehen den Studierenden mit Lösungen in Lernmanagementsystemen zum Selbststudium und jetzt auch im "Zentralen Open Educational Resources Repositorium der Hochschulen in Baden-Württemberg" (ZOERR) zur Verfügung. In diesem Beitrag wird über den Einsatz der Online-Übungsaufgaben in 2020/2021 berichtet, über die Ergebnisse der Wissenstests und über die in der Corona-Zeit neu eingerichteten eTutorien.
In recent years, the demand for accurate and efficient 3D body scanning technologies has increased, driven by the growing interest in personalised textile development and health care. This position paper presents the implementation of a novel 3D body scanner that integrates multiple RGB cameras and image stitching techniques to generate detailed point clouds and 3D mesh models. Our system significantly enhances the scanning process, achieving higher resolution and fidelity while reducing the cost, time and effort required for data acquisition and processing. Furthermore, we evaluate the potential use cases and applications of our 3D body scanner, focusing on the textile technology and health sectors. In textile development, the 3D scanner contributes to bespoke clothing production, allowing designers to construct made-to-measure garments, thus minimising waste and enhancing customer satisfaction through fitting clothing. In mental health care, the 3D body scanner can be employed as a tool for body image analysis, providing valuable insights into the psychological and emotional aspects of self-perception. By exploring the synergy between the 3D body scanner and these fields, we aim to foster interdisciplinary collaborations that drive advancements in personalisation, sustainability, and well-being.
Advancing mental health diagnostics: AI-based method for depression detection in patient interviews
(2023)
In this paper, we present a novel artificial intelligence (AI) application for depression detection, using advanced transformer networks to analyse clinical interviews. By incorporating simulated data to enhance traditional datasets, we overcome limitations in data protection and privacy, consequently improving the model’s performance. Our methodology employs BERT-based models, GPT-3.5, and ChatGPT-4, demonstrating state-of-the-art results in detecting depression from linguistic patterns and contextual information that significantly outperform previous approaches. Utilising the DAIC-WOZ and Extended-DAIC datasets, our study showcases the potential of the proposed application in revolutionising mental health care through early depression detection and intervention. Empirical results from various experiments highlight the efficacy of our approach and its suitability for real-world implementation. Furthermore, we acknowledge the ethical, legal, and social implications of AI in mental health diagnostics. Ultimately, our study underscores the transformative potential of AI in mental health diagnostics, paving the way for innovative solutions that can facilitate early intervention and improve patient outcomes.
AI-based prediction and recommender systems are widely used in various industry sectors. However, general acceptance of AI-enabled systems is still widely uninvestigated. Therefore, firstly we conducted a survey with 559 respondents. Findings suggested that AI-enabled systems should be fair, transparent, consider personality traits and perform tasks efficiently. Secondly, we developed a system for the Facial Beauty Prediction (FBP) benchmark that automatically evaluates facial attractiveness. As our previous experiments have proven, these results are usually highly correlated with human ratings. Consequently they also reflect human bias in annotations. An upcoming challenge for scientists is to provide training data and AI algorithms that can withstand distorted information. In this work, we introduce AntiDiscriminationNet (ADN), a superior attractiveness prediction network. We propose a new method to generate an unbiased convolutional neural network (CNN) to improve the fairn ess of machine learning in facial dataset. To train unbiased networks we generate synthetic images and weight training data for anti-discrimination assessments towards different ethnicities. Additionally, we introduce an approach with entropy penalty terms to reduce the bias of our CNN. Our research provides insights in how to train and build fair machine learning models for facial image analysis by minimising implicit biases. Our AntiDiscriminationNet finally outperforms all competitors in the FBP benchmark by achieving a Pearson correlation coefficient of PCC = 0.9601.
The aim of this work is the development of artificial intelligence (AI) application to support the recruiting process that elevates the domain of human resource management by advancing its capabilities and effectiveness. This affects recruiting processes and includes solutions for active sourcing, i.e. active recruitment, pre-sorting, evaluating structured video interviews and discovering internal training potential. This work highlights four novel approaches to ethical machine learning. The first is precise machine learning for ethically relevant properties in image recognition, which focuses on accurately detecting and analysing these properties. The second is the detection of bias in training data, allowing for the identification and removal of distortions that could skew results. The third is minimising bias, which involves actively working to reduce bias in machine learning models. Finally, an unsupervised architecture is introduced that can learn fair results even without ground truth data. Together, these approaches represent important steps forward in creating ethical and unbiased machine learning systems.
3D assisted 2D face recognition involves the process of reconstructing 3D faces from 2D images and solving the problem of face recognition in 3D. To facilitate the use of deep neural networks, a 3D face, normally represented as a 3D mesh of vertices and its corresponding surface texture, is remapped to image-like square isomaps by a conformal mapping. Based on previous work, we assume that face recognition benefits more from texture. In this work, we focus on the surface texture and its discriminatory information content for recognition purposes. Our approach is to prepare a 3D mesh, the corresponding surface texture and the original 2D image as triple input for the recognition network, to show that 3D data is useful for face recognition. Texture enhancement methods to control the texture fusion process are introduced and we adapt data augmentation methods. Our results show that texture-map-based face recognition can not only compete with state-of-the-art systems under the same precon ditions but also outperforms standard 2D methods from recent years.
In recent years, 3D facial reconstructions from single images have garnered significant interest. Most of the approaches are based on 3D Morphable Model (3DMM) fitting to reconstruct the 3D face shape. Concurrently, the adoption of Generative Adversarial Networks (GAN) has been gaining momentum to improve the texture of reconstructed faces. In this paper, we propose a fundamentally different approach to reconstructing the 3D head shape from a single image by harnessing the power of GAN. Our method predicts three maps of normal vectors of the head’s frontal, left, and right poses. We are thus presenting a model-free method that does not require any prior knowledge of the object’s geometry to be reconstructed.
The key advantage of our proposed approach is the substantial improvement in reconstruction quality compared to existing methods, particularly in the case of facial regions that are self-occluded in the input image. Our method is not limited to 3d face reconstruction. It is generic and applicable to multiple kinds of 3D objects. To illustrate the versatility of our method, we demonstrate its efficacy in reconstructing the entire human body.
By delivering a model-free method capable of generating high-quality 3D reconstructions, this paper not only advances the field of 3D facial reconstruction but also provides a foundation for future research and applications spanning multiple object types. The implications of this work have the potential to extend far beyond facial reconstruction, paving the way for innovative solutions and discoveries in various domains.