Refine
Document Type
- Journal article (197)
- Book chapter (18)
- Book (1)
- Anthology (1)
- Review (1)
Is part of the Bibliography
- yes (218)
Institute
- ESB Business School (78)
- Life Sciences (66)
- Informatik (46)
- Technik (21)
- Texoversum (7)
Publisher
- Elsevier (218) (remove)
A closed-loop control for a cooperative innovation culture in interorganizational R&D projects
(2022)
Since project managers only have a limited authority in interorganizational R&D projects a cooperative innovation culture is essential for team cohesion and thus for achieving project scope in time and cost. For its development different factors depending on underlying values are essential. These factors must be learned iteratively by the project members so that they are living the values of a cooperative innovation culture. Hence, this paper raises the following research question: “How to control living the values of a cooperative innovation culture in interorganizational R&D projects?” To answer this question, a closed-loop control for a cooperative innovation culture is developed. The developed closed-loop control system includes several different functional units which show essential roles and several different variables which show what to consider and design in the control system. In addition, the developed closed-loop control system is generalized for other types of projects such as intraorganizational projects.
Towards a sustainable future, looking beyond the system boundaries of a single manufacturing company is necessary to promote meaningful collaborations in terms of circular economy principles. In this context digital data processing technologies to connect the potential collaborators are seen as enablers to make use of proven collaborative circular business models (CCBMs). Since most of such data processing technologies rely on features to describe the entities involved, it is essential to provide guidance for identifying and selecting the relevant and most appropriate ones. Defining critical success factors (CSFs) is considered a suitable instrument to describe the decisive factors. A systematic literature review (SLR), followed by a qualitative synthesis is investigating two scientific fields of work, namely (1) the general relevant features of CCBMs and, (2) methodologies for determining CSFs. This results in the development of a conceptual framework which provides guidance for digital applications that perform further digital processing based on the relevant CSFs relating to the specific CCBM.
In smart factories, maintenance is still an important aspect to safeguard the performance of their production. Especially in case of failures of machine components diagnosis is a time-consuming task. This paper presents an approach for a cyber-physical failure management system, which uses information from machines such as programmable logic controller or sensor data and IT systems to support the diagnosis and repairing process. Key element is a model combining the different information sources to detect deviations and to determine a probable failed component. Furthermore, the approach is prototypically implemented for leakage detection in compressed air networks.
This paper presents the concept of the system architecture of a flexible cyber-physical factory control system. The system allows the automation of process structures using cyber-physical fractal nodes. These nodes have a functional and independent form and can be clustered to larger structures. This makes it possible to equip the factory with a flexible, freely scalable, modular system. The description of this system architecture and the associated rules and conditions is outlined in the concept.
The maintenance of railway infrastructure remains a challenge. Data acquisition technologies have evolved because of Industry 4.0, expanding the capabilities of predictive maintenance. Despite the advances, the potential of these emerging technologies has not been fully realised. This paper presents a technology selection framework in support of railway infrastructure predictive maintenance, which is based on qualitative methods. It consists of three stages, including the mapping of the infrastructure characteristics with the identified technologies, the evaluation of the most appropriate technologies, and the sourcing thereof. This presents the collective decision support output of the framework.
Maintenance is an increasingly complex and knowledge-intensive field. In order to address these challenges, assistance systems based on augmented, mixed, or virtual reality can be applied. Therefore, the objective of this paper is to present a framework that can be used to identify, select, and implement an assistance system based on reality technology in the maintenance environment. The development of the framework is based on a systematic literature review and subject matter expert interviews. The framework provides the best technological and economic solution in several steps. The validation of the framework is carried out through a case study.
Condition monitoring supported with artificial intelligence, cloud computing, and industrial internet of things (IIoT) technologies increases the feasibility of predictive maintenance. However, the cost of traditional sensors, data acquisition systems, and the required information technology expert-knowledge challenge the industry. This paper presents a hybrid condition monitoring system (CMS) architecture consisting of a distributed, low-cost IIoT-sensor solution. The CMS uses micro-electro-mechanical system (MEMS) microphones for data acquisition, edge computing for signal preprocessing, and cloud computing, including artificial neural networks (ANN) for higher-level information processing. The system's feasibility is validated using a testbed for reciprocating linear-motion axes.
In recent years, machine learning algorithms have made a huge development in performance and applicability in industry and especially maintenance. Their application enables predictive maintenance and thus offers efficiency increases. However, a successful implementation of such solutions still requires high effort in data preparation to obtain the right information, interdisciplinarity in teams as well as a good communication to employees. Here, small and medium sized enterprises (SME) often lack in experience, competence and capacity. This paper presents a systematic and practice-oriented method for an implementation of machine learning solutions for predictive maintenance in SME, which has already been validated.
Parallel grippers offer multiple applications thanks to their flexibility. Their application field ranges from aerospace and automotive to medicine and communication technologies. However, the application of grippers has the problem of exhibition wear and errors during the execution of their operation. This affects the performance of the gripper. In this context, the remaining useful life (RUL) defines the remaining lifespan until failure for an asset at a particular time of operation occurs. The exact lifespan of an asset is uncertain, thus the RUL model and estimation must be derived from available sources of information. This paper presents a method for the estimation of the RUL for a two-jaw parallel gripper. After the introduction to the topic, an overview of existing literature and RUL methods are presented. Subsequently, the method for estimating the RUL of grippers is explained. Finally, the results are summarized and discussed before the outlook and further challenges are presented.
In recent years, the numer of hybrid work systems using human robot collaboration (HRC) increased in industrial production environments - enhancing productivity while reducing work-related burden. Despite growing availability of HRC-suitable manipulation and safety technology, tools and techniques facilitating the design, planning and implementation process are still lacking. System engineers who strive to implement technically feasible, ergonomically meaningful and economically beneficial HRC application need to make design and technology decisions in various subject areas, whereas the design alternatives per morphological analysis is applied to establish a description model that can serve as both a supporting design guideline for future HRC application of value-adding, industrial quality as well as a tool to characterize and compare existing applications. It focuses on HRC within assembly processes, and illustrates the complexity of HRC applications in a comprehensible manner through its multi-dimensional structure. The morphology has been validated through its application on various existing industrial HRC applications, research demonstrators and interviews of experts from academia.
Cardiovascular diseases are directly or indirectly responsible for up to 38.5% of all deaths in Germany and thus represent the most frequent cause of death. At present, heart diseases are mainly discovered by chance during routine visits to the doctor or when acute symptoms occur. However, there is no practical method to proactively detect diseases or abnormalities of the heart in the daily environment and to take preventive measures for the person concerned. Long-term ECG devices, as currently used by physicians, are simply too expensive, impractical, and not widely available for everyday use. This work aims to develop an ECG device suitable for everyday use that can be worn directly on the body. For this purpose, an already existing hardware platform will be analyzed, and the corresponding potential for improvement will be identified. A precise picture of the existing data quality is obtained by metrological examination, and corresponding requirements are defined. Based on these identified optimization potentials, a new ECG device is developed. The revised ECG device is characterized by a high integration density and combines all components directly on one board except the battery and the ECG electrodes. The compact design allows the device to be attached directly to the chest. An integrated microcontroller allows digital signal processing without the need for an additional computer. Central features of the evaluation are a peak detection for detecting R-peaks and a calculation of the current heart rate based on the RR interval. To ensure the validity of the detected R-peaks, a model of the anatomical conditions is used. Thus, unrealistic RR-intervals can be excluded. The wireless interface allows continuous transmission of the calculated heart rate. Following the development of hardware and software, the results are verified, and appropriate conclusions about the data quality are drawn. As a result, a very compact and wearable ECG device with different wireless technologies, data storage, and evaluation of RR intervals was developed. Some tests yelled runtimes up to 24 hours with wireless Lan activated and streaming.
A seamless convergence of the digital and physical factory aiming in personalized Product Emergence Process (PPEP) for smart products within ESB Logistics Learning Factory at Reutlingen University.
A completely new business model with reference to Industrie4.0 and facilitated by 3D experience software in today's networked society in which customers expect immediate responses, delightful experience and simple solutions is one of the mission scenarios in the ESB Logistics Learning Factory at ESB Business School (Reutlingen University).
The business experience platform provides software solutions for every organization in the company respectively in the factory. An interface with dashboards, project management apps, 3D - design and construction apps with high end visualization, manufacturing and simulation apps as well as intelligence and social network apps in a collaborative interactive environment help the user to learn the creation of a value end to end process for a personalized virtual and later real produced product.
Instead of traditional ways of working and a conventional operating factory real workers and robots work semi-intuitive together. Centerpiece in the self-planned interim factory is the smart personalized product, uniquely identifiable and locatable at all times during the production process – a scooter with an individual colored mobile phone – holder for any smart phone produced with a 3D printer in lot size one. Smart products have in the future solutions incorporated internet based services – designed and manufactured - at the costs of mass products. Additionally the scooter is equipped with a retrievable declarative product memory. Monitoring and control is handled by sensor tags and a raspberry positioned on the product. The engineering design and implementation of a changeable production system is guided by a self-execution system that independently find amongst others esplanade workplaces.
The imparted competences to students and professionals are project management method SCRUM, customization of workflows by Industrie4.0 principles, the enhancements of products with new personalized intelligent parts, electrical and electronic selfprogrammed components and the control of access of the product memory information, to plan in a digital engineering environment and set up of the physical factory to produce customer orders. The gained action-orientated experience refers to the chances and requirements for holistic digital and physical systems.
Background and purpose: Transapical aortic valve replacement (TAVR) is a recent minimally invasive surgical treatment technique for elderly and high-risk patients with severe aortic stenosis. In this paper,a simple and accurate image-based method is introduced to aid the intra-operative guidance of TAVR procedure under 2-D X-ray fluoroscopy.
Methods: The proposed method fuses a 3-D aortic mesh model and anatomical valve landmarks with live 2-D fluoroscopic images. The 3-D aortic mesh model and landmarks are reconstructed from interventional X-ray C-arm CT system, and a target area for valve implantation is automatically estimated using these aortic mesh models.Based on template-based tracking approach, the overlay of visualized 3-D aortic mesh model, land-marks and target area of implantation is updated onto fluoroscopic images by approximating the aortic root motion from a pigtail catheter motion without contrast agent. Also, a rigid intensity-based registration algorithm is used to track continuously the aortic root motion in the presence of contrast agent.Furthermore, a sensorless tracking of the aortic valve prosthesis is provided to guide the physician to perform the appropriate placement of prosthesis into the estimated target area of implantation.
Results: Retrospective experiments were carried out on fifteen patient datasets from the clinical routine of the TAVR. The maximum displacement errors were less than 2.0 mm for both the dynamic overlay of aortic mesh models and image-based tracking of the prosthesis, and within the clinically accepted ranges. Moreover, high success rates of the proposed method were obtained above 91.0% for all tested patient datasets.
Conclusion: The results showed that the proposed method for computer-aided TAVR is potentially a helpful tool for physicians by automatically defining the accurate placement position of the prosthesis during the surgical procedure.
During the first years of the last decade, Egypt used to face recurrent electricity cut-offs in summer. In the past few years, the electricity tariff dramatically increased. Radiative cooling to the clear night sky is a renewable energy source that represents a relative solution. The dry desert climate promotes nocturnal radiative cooling applications. This study investigates the potential of nocturnal radiative cooling systems (RCSs) to reduce the energy consumption of the residential building sector in Egypt. The system technology proposed in this work is based on uncovered solar thermal collectors integrated into the building hydronic system. By implementing different control strategies, the same system could be used for both cooling and heating applications. The goal of this paper is to analyze the performance of RCSs in residential buildings in Egypt. The dynamic simulation program TRNSYS was used to simulate the thermal behavior of the system. The relevant issues of Egypt as a case-study are firstly overviewed. Then the paper introduces the work done to develop a building model that represents a typical residential apartment in Egypt. Typical occupancy profiles were developed to define the internal thermal gains. The adopted control strategy to optimize the system operation is presented as well. To fully understand and hence evaluate the operation of the proposed RCS, four simulation cases were considered: 1. a reference case (fully passive), 2. the stand-alone operation of the RCS, 3. ideal heating & cooling operation (fully-active), and 4. the hybrid-operation (when the active cooling system is supported by the proposed RCS). The analysis considered the main three distinct climates in Egypt, represented by the cities of Alexandria, Cairo and Asyut. The hotter and drier weather conditions resulted in a higher cooling potential and larger temperature differences. The simulated cooling power in Asyut was 28.4 W/m² for a 70 m² absorber field. For a smaller field area of 10 m², the cooling power reached 109 W/m² but with humble temperature differences. To meet the rigorous thermal comfort conditions, the proposed sensible RCS cannot fully replace conventional air-conditioning units, especially in humid areas like Alexandria. When working in a hybrid system, a 10% reduction in the active cooling energy demand could be achieved in Asyut to keep the cooling set-point at 24 °C. This percentage reduction was nearly doubled when the thermal comfort set-point was increased by two degrees (26 °C). In a sensitivity analysis, external shading devices as a passive measure as well as the implementation of the Egyptian code for buildings (ECP306/1–2005) were also investigated. The analysis of this study raised other relevant aspects to discuss, e.g. system-sizing, environmental effects, limitations and recommendations.
Using predictive maintenance, more efficient processes can be implemented, leading to fewer maintenance costs and increased availability. The development of a predictive maintenance solution currently requires high efforts in time and capacity as well as often interdisciplinary cooperation. This paper presents a standardized model to describe a predictive maintenance use case. The description model is used to collect, present, and document the required information for the implementation of predictive maintenance use cases by and for different stakeholders. Based on this model, predictive maintenance solutions can be introduced more efficiently. The method is validated across departments in the automotive sector.
Additive manufacturing is a key technology which applies the ideas of Industry 4.0 in order to enable the production of personalized and highly customized products economically. Especially small and medium sized companies often lack the competence and experience to evaluate objectively and profoundly the potential of additive manufacturing technologies in small and medium sized companies. Furthermore, the method has been validated in a small medical technology company evaluating the additive manufacturing potential of an existing surgery tool.
The development of automatic solutions for the detection of physiological events of interest is booming. Improvements in the collection and storage of large amounts of healthcare data allow access to these data faster and more efficiently. This fact means that the development of artificial intelligence models for the detection and monitoring of a large number of pathologies is becoming increasingly common in the medical field. In particular, developing deep learning models for detecting obstructive apnea (OSA) events is at the forefront. Numerous scientific studies focus on the architecture of the models and the results that these models can provide in terms of OSA classification and Apnea-Hypopnea-Index (AHI) calculation. However, little focus is put on other aspects of great relevance that are crucial for the training and performance of the models. Among these aspects can be found the set of physiological signals used and the preprocessing tasks prior to model training. This paper covers the essential requirements that must be considered before training the deep learning model for obstructive sleep apnea detection, in addition to covering solutions that currently exist in the scientific literature by analyzing the preprocessing tasks prior to training.
Sleep is an essential part of human existence, as we are in this state for approximately a third of our lives. Sleep disorders are common conditions that can affect many aspects of life. Sleep disorders are diagnosed in special laboratories with a polysomnography system, a costly procedure requiring much effort for the patient. Several systems have been proposed to address this situation, including performing the examination and analysis at the patient's home, using sensors to detect physiological signals automatically analysed by algorithms. This work aims to evaluate the use of a contactless respiratory recording system based on an accelerometer sensor in sleep apnea detection. For this purpose, an installation mounted under the bed mattress records the oscillations caused by the chest movements during the breathing process. The presented processing algorithm performs filtering of the obtained signals and determines the apnea events presence. The performance of the developed system and algorithm of apnea event detection (average values of accuracy, specificity and sensitivity are 94.6%, 95.3%, and 93.7% respectively) confirms the suitability of the proposed method and system for further ambulatory and in-home use.
Adaptation of the business model canvas template to develop business models for the circular economy
(2021)
The Business Model Canvas as a template for strategic management serves the development of new or the documentation of existing linear business models. However, the change towards a Circular Economy requires new value creation structures and thus changed business models. To develop business models for circular economies, it is necessary to adapt the existing template, since the actors involved along the value chain take on changed roles. In the context of this paper, a template is presented, based on the existing Business Model Canvas, which allows to develop and document business models for a Circular Economy.
The development of in vitro adipose tissue constructs is highly desired to cope with the increased demand for substitutes to replace damaged soft tissue after high graded burns, deformities or tumor removal. To achieve clinically relevant dimensions, vascularization of soft tissue constructs becomes inevitable but still poses a challenge. Adipose-derived stem cells (ASCs) represent a promising cell source for the setup of vascularized fatty tissue constructs as they can be differentiated into adipocytes and endothelial cells in vitro and are thereby available in sufficiently high cell numbers.
This review summarizes the currently known characteristics of ASCs and achievements in adipogenic and endothelial differentiation in vitro. Further, the interdependency of adipogenesis and angiogenesis based on the crosstalk of endothelial cells, stem cells and adipocytes is addressed at the molecular level. Finally, achievements and limitations of current co-culture conditions for the construction of vascularized adipose tissue are evaluated.
Age-dependent migratory behavior of human endothelial cells revealed by substrate microtopography
(2019)
Cell migration is part of many important in vivo biological processes and is influenced by chemical and physical factors such as substrate topography. Although the migratory behavior of different cell types on structured substrates has already been investigated, up to date it is largely unknown if specimen's age affects cell migration on structures. In this work, we investigated age-dependent migratory behavior of human endothelial cells from young (≤ 31 years old) and old (≥ 60 years old) donors on poly(dimethylsiloxane) microstructured substrates consisting of well-defined parallel grooves. We observed a decrease in cell migration velocity in all substrate conditions and in persistence length perpendicular to the grooves in cells from old donors. Nevertheless, in comparison to young cells, old cells exhibited a higher cell directionality along grooves of certain depths and a higher persistence time. We also found a systematic decrease of donor age dependent responses of cell protrusions in orientation, velocity and length, all of them decreased in old cells. These observations lead us to hypothesize a possible impairment of actin cytoskeleton network and affected actin polymerization and steering systems, caused by aging.
With the digital transformation, companies will experience a change that focuses on shaping the organization into an agile organizational form. In today's competitive and fast-moving business environment, it is necessary to react quickly to changing market conditions. Agility represents a promising option for overcoming these challenges. The path to an agile organization represents a development process that requires consideration of countless levels of the enterprise. This paper examines the impact of digital transformation on agile working practices and the benefits that can be achieved through technology. To enable a solution for today's so-called VUCA (Volatility, Uncertainty, Complexity und Ambiguity) world, agile ways of working can be applied project management requires adaptation. In the qualitative study, expert interviews were conducted and analyzed using the grounded theory method. As a result, a model can be presented that shows the influencing factors and potentials of agile management in the context of the digital transformation of medium-sized companies.
Digitalization changes the manufacturing dramatically. In regard of employees’ demands, global trends and the technological vision of future factories, automotive manufacturing faces a huge number of diverse challenges. Currently, research focuses on technological aspects of future factories in terms of digitalization. New ways of work and new organizational models for future factories have not been described yet. There are assumptions on how to develop the organization of work in a future factory but up to now, literature shows deficits in scientifically substantiated answers in this research area. Consequently, the objective of this paper is to present an approach on a work organization design for automotive Industry 4.0 manufacturing. Future requirements were analyzed and deducted to criteria that determine future agile organization design. These criteria were then transformed into functional mechanisms, which define the approach for shopfloor organization design
LDMOS transistors in integrated power technologies are often subject to thermo-mechanical stress, which degrades the on-chip metallization and eventually leads to a short. This paper investigates small sense lines embedded in the LDMOS metallization. It will be shown that their resistance depends strongly on the stress cycle number. Thus, they can be used as aging sensors and predict impending failures. Different test structures have been investigated to identify promising layout configurations. Such sensors are key components for resilient systems that adaptively reduce stress to allow aggressive LDMOS scaling without increasing the risk of failure.
Allyls
(2014)
This chapter addresses the importance and usage of the commercially low volume thermoset plastics group known as allyls. The three significant sub-elements of this group are poly(diallylphthalates), poly(diallylisophthalates), and poly(allyldiglycol carbonate). Chemistry, processing, and properties are also described. Allyl polymers are synthesized by radical polymerizations of allyl monomers that usually do not produce high-molecular-mass macromolecules. Therefore, only a few specific monomers can produce thermosetting materials. Diallyldiglycolcarbonate (CR-39) and diallylphthalates are the most significant examples that have considerably improved our everyday life.
Allyls
(2022)
This chapter addresses the importance and usage of the commercially low-volume thermoset plastics group known as allyls. The three significant subelements of this group are poly(diallylphthalates), poly(diallylisophthalates), and poly(allyldiglycol carbonate). Chemistry, processing, and properties are also described. Allyl polymers are synthesized by radical polymerizations of allyl monomers that usually do not produce high-molecular-mass macromolecules. Therefore only a few specific monomers can produce thermosetting materials. Diallyldiglycolcarbonate (CR-39) and diallylphthalates are the most significant examples that have considerably improved our everyday life.
Pokémon Go was the first mobile augmented reality (AR) game to reach the top of the download charts of mobile applications. However, little is known about this new generation of mobile online AR games. Existing theories provide limited applicability for user understanding. Against this background, this research provides a comprehensive framework based on uses and gratification theory, technology risk research, and flow theory. The proposed framework aims to explain the drivers of attitudinal and intentional reactions, such as continuance in gaming or willingness to invest money in in-app purchases. A survey among 642 Pokémon Go players provides insights into the psychological drivers of mobile AR games. The results show that hedonic, emotional, and social benefits and social norms drive consumer reactions while physical risks (but not data privacy risks) hinder consumer reactions. However, the importance of these drivers differs depending on the form of user behavior.
Increasing complexity in manufacturing processes poses new challenges for industrial maintenance. In addition, advanced machine monitoring and lifetime forecasting options expand the tools and maintenance strategies available. Today, maintenance strategy selection is performed sequentially usually based on prioritised machines and components. These selections are optimized locally for each machine isolated, not considering the context of other machines within the value-adding network. To overcome these challenges, this paper presents an approach for an integrated maintenance strategy selection in one-step by an integrated model considering possible machine failures and the context of other machines within the value-adding network in parallel.
The global demand for resources such as energy, land, or water is constantly increasing. It is therefore not sur- prising that research on the Food-Energy-Water (FEW) nexus has become a scientific as well as a general focus in recent years. A significant increase in publications since 2015 can be observed, and it can be expected that this trend will continue. A multilevel (macro, meso, and micro) perspective is essential, as the FEW nexus has cross- sectoral interdependencies. Several review studies on the FEW nexus can be found in the literature, in general, it can be concluded that the FEW nexus is a multi-disciplinary and complex topic. The studies examined identify essential fields of action for research, policy, and society. However, questions such as what are the main research fields at each level? Is it possible to divide the research into specific clusters? and do the clusters correlate with the levels, and what are the methods of modeling used in the clusters and levels? are still not fully discussed in the literature. An extensive literature review was conducted to get insight into the existing research areas. Especially in such fields as the FEW nexus, the amount of literature can get huge, and a human could get lost analyzing the literature manually. For that, we created word clouds and performed a cluster- and network-analysis to support the selection of most relevant papers for a detailed reading. In 2021, the most publications were published, with 173 publications, which corresponds to a share of 26.6 %. There has been a significant increase since 2015, and it can be expected that this trend will continue in the coming years. Most of the first authors come from the USA (25.4 %), followed by China with 22.4 %. From the word cloud and the top 20 words, which appear in the title and abstract, it can be deduced that the topic water is the most represented. However, the terms system, resource, model, study, change, development, and management also appear to be very important, which indi- cates the importance of a holistic approach to the topic. In total 9 clusters could be identified at the different levels. It can be seen that three clusters form well. For the others, a rather diffuse picture can be observed. In order to find out which topics are hidden behind the individual clusters, 6 publications from each cluster were subjected to a more detailed examination. With these steps, a number of 54 publications were identified for de- tailed consideration. The modeling approaches that are currently being applied in research can be classified into domain-specific tools (e. g. global water models, crop models or global climate models) and into more general tools to perform for example a life cycle analysis, spatial analysis using geographic information system, or system dynamics for a general understanding of the links between the domains. With the domain-specific tools, detailed research questions can be addressed to answer questions for a specific domain. However, these tools have the disadvantage that especially the links between the sectors food, energy, and water are not fully considered. Many implementations that are made today are at lowest level (micro) relate to bounded spatial areas and are derived from macro and meso level goals.
Railway operators are being challenged by increasing complexity and safeguarding the availability of passenger rolling stock, bringing maintenance and especially emerging technologies into the focus. This paper presents a model for selection and implementation of Industry 4.0 technologies in rolling stock maintenance. The model consists of different stages and considers the main components of rolling stock, the related appropriate maintenance strategies and Industry 4.0 technologies considering the maturity level of the railway operators. Relevant criteria and main prerequisites of the technologies were identified. The model proposes relevant activities and was validated by industry experts.
Decreasing batch sizes in production in line with Industrie 4.0 will lead to tremendous changes of the control of logistic processes in future production systems. Intelligent bins are crucial enablers to establish decentrally controlled material flow systems in value chain networks as well as at the intralogistics level. These intelligent bins have to be integrated into an overall decentralized monitoring and control approach and have to interact with humans and other entities just like other cyber-physical systems (CPS) within the cyber-physical production system (CPPS). To realize a decentralized material supply following the overall aim of a decentralized control of all production and logistics processes, an intelligent bin system is currently developed at the ESB Logistics Learning Factory. This intelligent bin system will be integrated into the self developed, cloud-based and event-oriented SES system (so-called “Self Execution System”) which goes beyond the common functionalities and capabilities of traditional manufacturing execution systems (MES).
To ensure a holistic integration of the intelligent bin for different material types into the SES framework, the required hard- and software components for the decentrally controlled bin system will be split into a common and an adaptable component. The common component represents the localization and network layer which is common for every bin, whereas the flexible component will be customizable to different requirements, like to the specific characteristics of the parts.
This work is a study about a comparison of survey tools and it should help developers in selecting a suited tool for application in an AAL environment. The first step was to identify the basic required functionality of the survey tools used for AAL technologies and to compare these tools by their functionality and assignments. The comparative study was derived from the data obtained, previous literature studies and further technical data. A list of requirements was stated and ordered in terms of relevance to the target application domain. With the help of an integrated assessment method, the calculation of a generalized estimate value was performed and the result is explained. Finally, the planned application of this tool in a running project is explained.
Development work within an experimental environment, in which certain properties are investigated and optimized, requires many test runs and is therefore often associated with long execution times, costs and risks. This can affect product, material and technology development in industry and research. New digital driver technologies offer the possibility to automate complex manual work steps in a cost-effective way, to increase the relevance of the results and to accelerate the processes many times over. In this context, this article presents a low-cost, modular and open-source machine vision system for test execution and evaluates it on the basis of a real industrial application. For this purpose a methodology for the automated execution of the load intervals, the process documentation and for the evaluation of the generated data by means of machine learning to classify wear levels. The software and the mechanical structure are designed to be adaptable to different conditions, components and for a variety of tasks in industry and research. The mechanical structure is required for tracking the test object and represents a motion platform with independent positioning by machine vision operators or machine learning. An evaluation of the state of the test object is performed by the transfer learning after the initial documentation run. The manual procedure for classifying the visually recorded data on the state of the test object is described for the training material. This leads to an increased resource efficiency on the material as well as on the personnel side since on the one hand the significance of the tests performed is increased by the continuous documentation and on the other hand the responsible experts can be assigned time efficiently. The presence and know-how of the experts are therefore only required for defined and decisive events during the execution of the experiments. Furthermore, the generated data are suitable for later use as an additional source of data for predictive maintenance of the developed object.
It has not yet been possible to achieve the desired aim of decoupling economic growth from global material demand. Small and medium sized enterprises (SMEs) represent the backbone of most industrialized economies. Although material efficiency is of vital importance for many SMEs, few of them actually treat it as their top priority. There is a cornucopia of tools and methods available, which can be used for material efficiency purposes. These, however, have gained little groud in the SME-field. This work deals with the enabling factors for material efficiency improvements in manufacturing SMEs and projections towards aspects of supply chain and circular economy. A multi-disciplinary decoupling approach for manufacturing SMEs and an implementation roadmap for further practical development are proposed. The approach combines appropriate complexity of technology and socio-economic considerations. It enables a connection to existing methods and the implementation of established information technologies.
Electric freight vehicles have the potential to mitigate local urban road freight transport emissions, but their numbers are still insignificant. Logistics companies often consider electric vehicles as too costly compared to vehicles powered by combustion engines. Research within the body of the current literature suggests that increasing the driven mileage can enhance the competitiveness of electric freight vehicles. In this paper we develop a numeric simulation approach to analyze the cost-optimal balance between a high utilization of medium-duty electric vehicles – which often have low operational costs – and the common requirement that their batteries will need expensive replacements. Our work relies on empirical findings of the real-world energy consumption from a large German field test with medium-duty electric vehicles. Our results suggest that increasing the range to the technical maximum by intermediate (quick) charging and multi-shift usage is not the most cost-efficient strategy in every case. A low daily mileage is more cost-efficient at high energy prices or consumptions, relative to diesel prices or consumptions, or if the battery is not safeguarded by a long warranty. In practical applications our model may help companies to choose the most suitable electric vehicle for the application purpose or the optimal trip length from a given set of options. For policymakers, our analysis provides insights on the relevant parameters that may either reduce the cost gap at lower daily mileages, or increase the utilization of medium-duty electric vehicles, in order to abate the negative impact of urban road freight transport on the environment.
The influence of sleep on human health is enormous. Accordingly, sleep disorders can have a negative impact on it. To avoid this, they should be identified and treated in time. For this purpose, objective (with an appropriate device) or subjective (based on perceived values) measurement methods are used for sleep analysis to understand the problem. The aim of this work is to find out whether an exchange of the two methods is possible and can provide reliable results. In accordance with this goal, a study was conducted with people aged over 65 years old (a total of 154 night-time recordings) in which both measurement methods were compared. Sleep questionnaires and electronic devices for sleep assessment placed under the mattress were applied to achieve the study aims. The obtained results indicated that the correlation between both measurement methods could be observed for sleep characteristics such as total sleep time, total time in bed and sleep efficiency. However, there are also significant differences in absolute values of the two measurement approaches for some subjects/nights, which leads us to conclude that the substitution is more likely to be considered in case of long-term monitoring where the trends are of more importance and not the absolute values for individual nights.
Home health applications have evolved over the last few decades. Assistive systems such as a data platform in connection with health devices can allow for health-related data to be automatically transmitted to a database. However, there remain significant challenges concerning intermodular communication. Central among them is the challenge of achieving interoperability, the ability of devices to communicate and share data with each other. A major goal of this project was to extend an existing data platform (COMES®) and establish working interoperability by connecting assistive devices with differing approaches. We describe this process for a sleep monitoring and a physical exercise device. Furthermore, we aimed to test this setup and the implementation with a data platform in both a laboratory and an in-home setting with 11 elderly participants. The platform modification was realized, and the relevant changes were made so that the incoming data could be processed by the data platform, as well as visually displayed in real-time. Data was recorded by the respective device and transmitted into the data server with minor disruptions. Our observations affirmed that difficulties and data loss are far more likely to occur with increasing technical complexity, in the event of instable internet connection, or when the device setup requires (elderly) subjects to take specific steps for proper functioning. We emphasize the importance for tests and evaluations of home health technologies in real-life circumstances.
Based on a survey among customers of seven German municipal utilities, we estimate two regression models to identify the most prospective customer segments and their preferences and motivations for participating in peer-to-peer (P2P) electricity trading and develop implications for decision-makers in the energy sector and policy-makers for this currently relatively unknown product. Our results show a large general openness of private households towards P2P electricity trading, which is also the main predictor of respondents' intention to participate. It is mainly influenced by individuals’ environmental attitude, technical interest, and independence aspiration. Respondents with the highest willingness to participate in P2P electricity trading are mainly motivated by the ability to share electricity, and to a lesser extent by economic reasons. They also have stronger preferences for innovative pricing schemes (service bundles, time-of-use tariffs). Differences between individuals can be observed depending on their current ownership (prosumers) or installation probability of a microgeneration unit (consumers, planners). Rather than current prosumers, especially planners willing to install microgeneration in the foreseeable future are considered to be the most promising target group for P2P electricity trading. Finally, our results indicate that P2P electricity trading could be a promising niche option in the German energy transition.
We report an investigation into the distribution of copper oxidation states in oxide films formed on the surfaces of technical copper. The oxide films were grown by thermal annealing at ambient conditions and studied using Auger depth profiling and UV–Vis spectroscopy. Both Auger and UV–Vis data were evaluated applying multivariate curve resolution (MCR). Both experimental techniques revealed that the growth of Cu2O dominates the initial ca. 40 nm of oxide films grown at 175 °C, while further oxide growth is dominated by CuO formation. The largely coincident results from both experimental approaches demonstrates the huge benefit of the application of UV–Vis spectroscopy in combination with MCR analysis, which provides access to information on chemical state distributions without the need for destructive sample analysis. Both approaches are discussed in detail.
Automatic anode rod inspection in aluminum smelters using deep-learning techniques: a case study
(2020)
Automatic fault detection using machine learning has become an exciting and promising area of research. This because it accurate and timely way to manage and classify with minimal human effort. In the computer vision community, deep-learning methods have become the most suitable approaches for this task. Anodes are large carbon blocks that are used to conduct electricity during the aluminum reduction process. The most basic function of anode rod inspection is to prevent a situation where the anode rod will not fit into the stub-holes of a new anode. It would be the case for a rod containing either severe toe-in, missing stubs, or a retained thimble on one or more stubs. In this work, to improve the accuracy of shape defect inspection for an anode rod, we use the Fast Region-based Convolutional Network method (Fast R-CNN), model. To train the detection model, we collect an image dataset composed of multi-class of anode rod defects with annotated labels. Our model is trained using a small number of samples, an essential requirement in the industry where the number of available defective samples is limited. It can simultaneously detect multi-class of defects of the anode rod in nearly real-time.
Film formation of self synthesized Polymer EPM–g–VTMDS (ethylene–propylene rubber, EPM, grafted with vinyltetramethyldisiloxane, VTMDS) was studied regarding bonding to adhesion promoter vinyltrimethoxysilane (VTMS) on oxidized 18/10 chromium/nickel–steel (V2A) stainless steel surfaces. Polymer films of different mixed solutions including commercial siloxane and silicone, dimethyl, vinyl group terminated crosslinker (HANSA SFA 42100, CAS# 68083-19-2, 0.35 mmol Vinyl/g) and platinum, 1,3-diethenyl-1,1,3,3-tetramethyldisiloxane complex Karstedt's catalyst (ALPA–KAT 1, CAS# 68478-92-2) were spin coated on V2A stainless steel surfaces with adsorbed VTMS thin layers in order to analyze film formation of EPM–g–VTMDS at early stages. Surface topography and chemical bonding of the high performance polymers on different oxidized V2A surfaces were investigated with X–ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), scanning electron microscopy (SEM) and surface enhanced Raman spectroscopy (SERS). AFM and SEM as well as XPS results indicated that the formation of the polymer film proceeds via growth of polymer islands. Chemical signatures of the essential polymer contributions, linker and polymer backbones, could be identified using XPS core level peak shape analysis and also SERS. The appearance of signals which are related to Si–O–Si can be seen as a clear indication of lateral crosslinking and silica network formation in the films on the V2A surface.
Coupling electricity and heat sector is one of the most necessary actions for the successful energy transition. Efficient electrification for space heating and domestic hot water generation is needed for buildings, which are not connected to any district heating network, as distributed heating demand momentarily is largely met by fossil fuels. Hence, hybrid energy systems will play a pivotal role for the energy transition in buildings. Heat pumps running on PV-electricity is one of the most widely discussed combination for this purpose. In this paper, a heuristic optimization method for the optimal operation of a heat pump driven by the objective for maximum onsite PV electricity utilization is presented. In this context, the thermal flexibility of the building and a thermal energy storage (TES) for generation of domestic hot water (DHW) are activated in order to shift the operation of the heat pump to times of PV-generation. Yearly simulations for a system consisting of heat pump, PV modules, building with floor heating installation and TES for DHW generation are carried out. Variation parameters for the simulation include room temperature amplitude (0.5, 1, 1.5 and 2 K) based on mean room temperature (21 °C), PV-capacity (4, 6, 8 and 10 kW) and type of heat pump (ground source and air source type). The yearly energy balances show that buildings offer significant thermal storage capacity avoiding an additional, large TES for space heating fulfillment and improving the share of onsite PV electricity utilization. With introduction of a battery, which has been analyzed as well for different sizes (1.9, 4.8, 7.7 and 10.6 kWh), the share of onsite PVelectricity utilization can even be improved. However, thermal flexibility supplemented by the varying room temperature amplitude for a bigger battery does not improve the share of onsite PV-electricity utilization. Nevertheless, even with a battery not more than 50% of the electrical load including operation of the heat pump can be covered by PV-electricity for the specific system under investigation. This is noteworthy on the one hand, since it indicates that a hybrid heating system consisting of heat pump and PV cannot solely cover the heat demand of residential buildings. One the other hand, this emphasizes the necessity to include further renewable sources like wind power, in order to draw the complete picture. This, however, is beyond the scope of this paper, which mainly focuses on introduction and verification of the novel control method with regard to a practical building.
Propofol is a commonly used intravenous general anesthetic. Multi-capillary column (MCC) coupled ion-mobility spectrometry (IMS) can be used to quantify exhaled propofol, and thus estimate plasma drug concentration. Here, we present results of the calibration and analytical validation of a MCC/IMS pre-market prototype for propofol quantification in exhaled air.
In previous studies, we used a method for detecting stress that was based exclusively on heart rate and ECG for differentiation between such situations as mental stress, physical activity, relaxation, and rest. As a response of the heart to these situations, we observed different behavior in the Root Mean Square of the Successive differences heartbeats (RMSSD). This study aims to analyze Virtual Reality via a virtual reality headset as an effective stressor for future works. The value of the Root Mean Square of the Successive Differences is an important marker for the parasympathetic effector on the heart and can provide information about stress. For these measurements, the RR interval was collected using a breast belt. In these studies, we can observe the Root Mean Square of the successive differences heartbeats. Additional sensors for the analysis were not used. We conducted experiments with ten subjects that had to drive a simulator for 25 minutes using monitors and 25 minutes using virtual reality headset. Before starting and after finishing each simulation, the subjects had to complete a survey in which they had to describe their mental state. The experiment results show that driving using virtual reality headset has some influence on the heart rate and RMSSD, but it does not significantly increase the stress of driving.
Close and safe interaction of humans and robots in joint production environments is technically feasible, however should not be implemented as an end in itself but to deliver improvement in any of a production system’s target dimensions. Firstly, this paper shows that an essential challenge for system integrators during the design of HRC applications is to identify a suitable distribution of available tasks between a robotic and a human resource. Secondly, it proposes an approach to determine task allocation by considering the actual capabilities of both human and robot in order to improve work quality. It matches those capabilities with given requirements of a certain task in order to identify the maximum congruence as the basis for the allocation decision. The approach is based on a study and subsequent generic description of human and robotic capabilities as well as a heuristic procedure that facilities the decision making process.
The citizen-centered health platform project is intended to provide a platform that can be used in EU cross-border regions, where social and economic exchange occurs across national borders. The overriding challenges are: (a) social: improving citizen-centered health and care provision; (b) technical: providing a digital platform for networking citizens, service providers, and municipal actors; (c) economic: developing long-term successful (sustainable) business models/value chains. The platform should strengthen and expand existing networks and establish new regional networks. Each network addresses particular challenges and apply them in a region-specific manner. Here, the national boundary conditions and the interregional needs play an essential role. These objectives require sufficient participation of civil society representatives. Furthermore, the platform will establish an overarching, sustainable, and knowledge-based network of health experts. The platform is to be jointly developed and implemented in the regions and follow an open-access approach. Therefore, synergies will be shared more quickly, strengthening competencies and competitiveness. In addition to practice partners, scientific and municipal institutions and SMEs are involved. The actors thus contribute to scientific performance, innovative strength, and resilience.
In vitro cultured cells produce a complex extracellular matrix (ECM) that remains intact after decellularization. The biological complexity derived from the variety of distinct ECM molecules makes these matrices ideal candidates for biomaterials. Biomaterials with the ability to guide cell function are a topic of high interest in biomaterial development. However, these matrices lack specific addressable functional groups, which are often required for their use as a biomaterial. Due to the biological complexity of the cell-derived ECM, it is a challenge to incorporate such functional groups without affecting the integrity of the biomolecules within the ECM. The azide-alkyne cycloaddition (click reaction, Huisgen-reaction) is an efficient and specific ligation reaction that is known to be biocompatible when strained alkynes are used to avoid the use of copper (I) as a catalyst. In our work, the ubiquitous modification of a fibroblast cell-derived ECM with azides was achieved through metabolic oligosaccharide engineering by adding the azide-modified monosaccharide Ac4GalNAz (1,3,4,6 tetra-O-acetyl-N-azidoacetylgalactosamine) to the cell culture medium. The resulting azide-modified network remained intact after removing the cells by lysis and the molecular structure of the ECM proteins was unimpaired after a gentle homogenization process. The biological composition was characterized in order to show that the functionalization does not impair the complexity and integrity of the ECM. The azides within this ‘‘clickECM” could be accessed by small molecules (such as an alkyne modified fluorophore) or by surface-bound cyclooctynes to achieve a covalent coating with clickECM.
Comments on “Solubility parameter of chitin and chitosan”, Carbohydrate Polymers 36 (1998) 121–127
(2017)
Results on the solubility parameters of chitin and chitosan presented in the paper DOI: 10.1016/S0144-8617(98)00020-4 were recalculated and data evaluation was redone. A number of misprints, erroneous calculations and data evaluations were found with respect to Hansen as well as total solubility parameters as derived according to group contribution methods by Hoftyzer-Van Krevelen and Hoy’s system. Revised numerical data are presented.
In vitro models of human adipose tissue may serve as beneficial alternatives to animal models to study basic biological processes, identify new drug targets, and as soft tissue implants. With this approach, we aimed to evaluate adipose-derived stem cells (ASC) and mature adipocytes (MA) comparatively for the application in the in vitro setup of adipose tissue constructs to imitate native adipose tissue physiology. We used human primary MAs and human ASCs, differentiated for 14 days, and encapsulated them in collagen type I hydrogels to build up a three-dimensional (3D) adipose tissue model. The maintenance of the models was analyzed after seven days based on a viability staining. Further, the expression of the adipocyte specific protein perilipin A and the release of leptin and glycerol were evaluated. Gene transcription profiles of models based on dASCs and MAs were analyzed with regard to native adipose tissue. Compared to MAs, dASCs showed an immature differentiation state. Further, gene transcription of MAs suggests a behavior closer to native tissue in terms of angiogenesis, which supports MAs as preferred cell type. In contrast to native adipose tissue, genes of de novo lipogenesis and tissue remodeling were upregulated in the in vitro attempts.
Bone homeostasis is maintained by osteoblasts (bone formation) and osteoclasts (bone resorption). While there have been numerous studies investigating mesenchymal stem cells and their potential to differentiate into osteoblasts as well as their interaction with different bone substitute materials, there is only limited knowledge concerning in vitro generated osteoclasts. Due to the increasing development of degradable bone-grafting materials and the need of sophisticated in vitro test methods, it is essential to gain deeper insight into the process of osteoclastogenesis and the resorption functionality of human osteoclasts. Therefore, we focused on the comparison of osteoclastogenesis and resorption activity on tissue culture polystyrene (TCPS) and bovine extracellular bone matrices (BMs). Cortical bone slices were used as two-dimensional (2D) substrates, whereas a thermally treated cancellous bone matrix was used for three-dimensional (3D) experiments. We isolated primary human monocytes and induced osteoclastogenesis by medium supplementation. Subsequently, the expression of the vitronectin receptor (αVβ3) and cathepsin K as well as the characteristic actin formation on TCPS and the two BMs were examined. The cell area of human osteoclasts was analyzed on TCPS and on BMs, whereas significantly larger osteoclasts could be detected on BMs. Additionally, we compared the diameter of the sealing zones with the measured diameter of the resorption pits on the BMs and revealed similar diameters of the sealing zones and the resorption pits. We conclude that using TCPS as culture substrate does not affect the expression of osteoclast-specific markers. The analysis of resorption activity can successfully be conducted on cortical as well as on cancellous bone matrices. For new in vitro test systems concerning bone resorption, we suggest the establishment of a 2D assay for high throughput screening of new degradable bone substitute materials with osteoclasts.