Refine
Year of publication
- 2021 (86) (remove)
Document Type
- Conference proceeding (86) (remove)
Is part of the Bibliography
- yes (86) (remove)
Institute
- Informatik (43)
- ESB Business School (27)
- Technik (16)
- Texoversum (1)
Publisher
- Springer (21)
- IEEE (13)
- Association for Information Systems (AIS) (5)
- SSRN (5)
- VDE Verlag GmbH (5)
- ACM (4)
- Hochschule Reutlingen (3)
- Verlag IFZ - Hochschule Luzern (3)
- Hochschule Nordhausen (2)
- IARIA (2)
Several studies analyzed existing Web APIs against the constraints of REST to estimate the degree of REST compliance among state-of-the-art APIs. These studies revealed that only a small number of Web APIs are truly RESTful. Moreover, identified mismatches between theoretical REST concepts and practical implementations lead us to believe that practitioners perceive many rules and best practices aligned with these REST concepts differently in terms of their importance and impact on software quality. We therefore conducted a Delphi study in which we confronted eight Web API experts from industry with a catalog of 82 REST API design rules. For each rule, we let them rate its importance and software quality impact. As consensus, our experts rated 28 rules with high, 17 with medium, and 37 with low importance. Moreover, they perceived usability, maintainability, and compatibility as the most impacted quality attributes. The detailed analysis revealed that the experts saw rules for reaching Richardson maturity level 2 as critical, while reaching level 3 was less important. As the acquired consensus data may serve as valuable input for designing a tool-supported approach for the automatic quality evaluation of RESTful APIs, we briefly discuss requirements for such an approach and comment on the applicability of the most important rules.
Veränderungen der Rolle von Controllern in Großkonzernen - Ergebnisse einer empirischen Erhebung
(2021)
Die anhaltende Diskussion über die Rolle von Management Accountants (MA) führt häufig dazu, dass die Rolle des Business Partners (BP) als die Rolle der Wahl angesehen wird. Dennoch scheinen viele Wissenschaftler und Praktiker davon auszugehen, dass diese Rolle den Managern und MA klar ist, dass sie für sie sinnvoll ist und alle Manager und MA ihr zustimmen und sie umsetzen. Unstimmigkeiten zwischen der tatsächlichen Rolle, der wahrgenommenen und der erwarteten Rolle könnten zu Identitäts- und Rollenkonflikten führen. Dieser Beitrag basiert auf einer quantitativen empirischen Studie in einem großen deutschen High-Tech-Unternehmen im Jahr 2019, dessen Top-Management sich für die Einführung der BP-Rolle entschied.
Avatars are in use when interacting in virtual environments in different contexts, in collaborative work, as well as in gaming and also in virtual meetings with friends. Therefore it is important to understand how the relationship between user and avatar works. In this study, an online survey is used to determine how the perception of an avatar changes in different contexts by relating it to existing avatar relationship typologies. Additionally, it is determined whether in each context a realistic, abstract or comic-like representation is preferred by the participants. One result was a preference of low poly representations in the work context, which are associated with the perception of the avatar as a tool. In the context of meeting friends, a realistic representation is perceived as more appropriate, which is perceived as an accurate self-representation. In the gaming context, the results are less clear, which can be attributed to different gaming preferences. Here, unlike in the other contexts, a comic-like representation is also perceived as appropriate, which is associated with the perception of the avatar as a friend. A symbiotic user-avatar relationship is not directly related to any form of representation, but always lies in the midfield, which is attributed to the fact that it represents a whole spectrum between other categories.
Forecasting demand is challenging. Various products exhibit different demand patterns. While demand may be constant and regular for one product, it may be sporadic for another, as well as when demand occurs, it may fluctuate significantly. Forecasting errors are costly and result in obsolete inventory or unsatisfied demand. Methods from statistics, machine learning, and deep learning have been used to predict such demand patterns. Nevertheless, it is not clear for what demand pattern, which algorithm would achieve the best forecast. Therefore, even today a large number of models are used to forecast on a test period. The model with the best result on the test period is used for the actual forecast. This approach is computationally and time intensive and, in most cases, uneconomical. In our paper we show the possibility to use a machine learning classification algorithm, which predicts the best possible model based on the characteristics of a time series. The approach was developed and evaluated on a dataset from a B2B-technical-retailer. The machine learning classification algorithm achieves a mean ROC-AUC of 89%, which emphasizes the skill of the model.
Intermittent time series forecasting is a challenging task which still needs particular attention of researchers. The more unregularly events occur, the more difficult is it to predict them. With Croston’s approach in 1972 (1.Nr. 3:289–303), intermittence and demand of a time series were investigated the first time separately. He proposes an exponential smoothing in his attempt to generate a forecast which corresponds to the demand per period in average. Although this algorithm produces good results in the field of stock control, it does not capture the typical characteristics of intermittent time series within the final prediction. In this paper, we investigate a time series’ intermittence and demand individually, forecast the upcoming demand value and inter-demand interval length using recent machine learning algorithms, such as long-short-term-memories and light-gradient-boosting machines, and reassemble both information to generate a prediction which preserves the characteristics of an intermittent time series. We compare the results against Croston’s approach, as well as recent forecast procedures where no split is performed.
Coopetitive endeavors offer valuable strategic options for firms. Yet, many of them are failure-prone as partners must balance collective and private interest. While interpartner trust is considered central for alliance success, paradoxically, the role and dynamics of trust is still not understood. We synthesize a computational model, capturing relational dynamics of an alliance, encompassing coevolution of trust, partner contributions, and (relative) alliance interactions. Analyzing alliance dynamics using simulation we find and explore a tipping boundary, separating a regime of alliance failure and success. We identify implications for collaborative (aspirations) and private strategies (openness). Our analyses reveal that strategies informed by a static mental model of partner trust, contributions, and openness tend to yield subpar alliance results and hidden failure-risk. We discuss implications for management theory.
Ambitious goals set by the European Union strategy towards the emission reduction of multimodal logistic chains and new requirements for intermodal terminals set by the evolution of customer needs, contribute to a shift in the driver for the infrastructure development: from economy of scale to economy of density. This paper aims to present an innovative method for designing a process oriented technology chain for intermodal terminals in order to fulfill these new demanding requirements. The results of the case study of the Zero Emission Logistic Terminal Reutlingen are presented, highlighting how this particular context enables the design and development of a modular concept, paving the way for the generalization of the findings towards the transfer to similar contexts of other European cities.
While there has been increased digitization of private homes, only little has been done to understand these specific home technologies, how they serve consumers, among other issues. “Smart home technology” (SHT) refer to a wide range of artifacts from cleaning aids to energy advisors. Given this breadth, clarity surrounding the key characteristics and the multi-faceted impact of SHT is needed to conduct more directed research on SHT. We propose a taxonomy to help outline the salient intended outcomes of SHT. Through a process involving five iterations, we analyzed and classified 79 technologies (gathered from literature and industry reports). This uncovered seven dimensions encompassing 20 salient characteristics. We believe these dimensions/characteristics will help researchers and organizations better design and study the impacts of these technologies. Our long-term agenda is to use the proposed taxonomy for an exploratory inquiry to understand tensions occurring when personal and sustainability-related outcomes compete.
In this work, a comparison between different brushless harmonic-excited wound-rotor synchronous machines is performed. The general idea of all topologies is the elimination of the slip rings and auxiliary windings by using the already existing stator and rotor winding for field excitation. This is achieved by injecting a harmonic airgap field with the help of power electronics. This harmonic field does not interact with the fundamental field, it just transfers the excitation power across the airgap. Alternative methods with varying number of phases, different pole-pair combinations, and winding layouts are covered and compared with a detailed Finite-Element-parameterized model. Parasitic effects due to saturation and coupling between the harmonic and main windings are considered.
Distributed ledger technologies such as the blockchain technology offer an innovative solution to increase visibility and security to reduce supply chain risks. This paper proposes a solution to increase the transparency and auditability of manufactured products in collaborative networks by adopting smart contract-based virtual identities. Compared with existing approaches, this extended smart contract-based solution offers manufacturing networks the possibility of involving privacy, content updating, and portability approaches to smart contracts. As a result, the solution is suitable for the dynamic administration of complex supply chains.
Electronic design automation approaches can roughly be divided into optimizers and procedures. While the former have enabled highly automated synthesis flows for digital integrated circuits, the latter play a vital (but mostly underestimated role) in the analog domain. This paper describes both automation strategies in comparison, identifying two fundamentally different automation paradigms that reflect the two basic design practices known as “top-down” and “bottom-up”. Then, with a focus on the latter, the history of procedural approaches is traced from their
early beginnings until today’s evolvements and future prospects to underline their practical importance and to accentuate their scientific value, both in itself and in the overall context of EDA.
Study programs in higher education have to reflect important societal and industrial challenges to prepare the next generations of professionals for future tasks. The focus of this paper is the challenge of digitalization and digital transformation. The paper proposes the IS education profile of a Digital Business Architect (DBA). The study program emphasizes design thinking, model centricity, and capability thinking as a response to domain requirements from digital transformation and educational system and structure requirements. Experiences in implementing the DBA include the need for integrating deductive and inductive teaching, a strong basis in real-world cases, and collaborative learning approaches to develop adequate competences in business model management, enterprise modeling, enterprise architecture management, and capability management.
Context: Agile practices as well as UX methods are nowadays well-known and often adopted to develop complex software and products more efficiently and effectively. However, in the so called VUCA environment, which many companies are confronted with, the sole use of UX research is not sufficient to find the best solutions for customers. The implementation of Design Thinking can support this process. But many companies and their product owners don’t know how much resources they should spend for conducting Design Thinking.
Objective: This paper aims at suggesting a supportive tool, the “Discovery Effort Worthiness (DEW) Index”, for product owners and agile teams to determine a suitable amount of effort that should be spent for Design Thinking activities.
Method: A case study was conducted for the development of the DEW index. Design Thinking was introduced into the regular development cycle of an industry Scrum team. With the support of UX and Design Thinking experts, a formula was developed to determine the appropriate effort for Design Thinking.
Results: The developed “Discovery Effort Worthiness Index” provides an easy-to-use tool for companies and their product owners to determine how much effort they should spend on Design Thinking methods to discover and validate requirements. A company can map the corresponding Design Thinking methods to the results of the DEW Index calculation, and product owners can select the appropriate measures from this mapping. Therefore, they can optimize the effort spent for discovery and validation.
Imagine a world in which the search for tomorrow's trends is not subject to a long and laborious data search but is possible with a single mouse click. Through the use of artificial intelligence (AI), this reality is made possible and is to be further advanced through research. The study therefore aims to provide an initial overview of the young research field. Based on research, expert interviews, company and student surveys, current application possibilities of AI in the innovation process (defined as Smart Innovation), existing challenges that slow down the further development are discussed in more detail and future application possibilities are presented. Finally, a recommendation for action is made for business, politics and science to help overcome the current obstacles together and thus drive the future of Smart Innovation.
Imagine a world in which the search for tomorrow's trends of (software) products is not subject to a long and laborious data search but is possible with a single mouse click. Through the use of artificial intelligence (AI), this reality is made possible and is to be further advanced through research. The study therefore aims to provide an initial overview of the young research field. Based on research, expert interviews, company and student surveys, current application possibilities of AI in the innovation process (defined as Smart Innovation), existing challenges that slow down the further development are discussed in more detail and future application possibilities are presented. Finally, a recommendation for action is made for business, politics and science to help overcome the current obstacles together and thus drive the future of Smart Innovation.
Durch das Verbot der ozonschädigenden Fluor-Chlorkohlenwasserstoffen als Kältemittel und der heute überwiegend eingesetzten Fluor-Kohlenwasserstoffe, welche sich negativ auf den Treibhauseffekt auswirken, gewinnt das umweltfreundlichere CO2 (Kohlendioxid) in der Verwendung als Kältemittel an Bedeutung. Ausgangspunkt dieser Arbeit sind ein Prototyp einer reversiblen CO2 Wärmepumpe und ein Simulationsmodell derselbigen. Ziel dieser Arbeit ist es das Simulationsmodell, anhand von realen Messergebnissen des Prototyps, zu verifizieren. Durch die Berechnung von Vergleichsparametern, das Festlegen von Randbedingungen und geeigneten Messpunkten am Prototyp wird die Simulation optimiert. Abschließend folgt die Bewertung der Ergebnisse im Hinblick auf die Funktionalität der Wärmepumpe und deren Abbild in der Simulation.
Forecasting demand is challenging. Various products exhibit different demand patterns. While demand may be constant and regular for one product, it may be sporadic for another, as well as when demand occurs, it may fluctuate significantly. Forecasting errors are costly and result in obsolete inventory or unsatisfied demand. Methods from statistics, machine learning, and deep learning have been used to predict such demand patterns. Nevertheless, it is not clear for what demand pattern, which algorithm would achieve the best forecast. Therefore, even today a large number of models are used to forecast on a test period. The model with the best result on the test period is used for the actual forecast. This approach is computationally and time intensive and, in most cases, uneconomical. In our paper we show the possibility to use a machine learning classification algorithm, which predicts the best possible model based on the characteristics of a time series. The approach was developed and evaluated on a dataset from a B2B-technical-retailer. The machine learning classification algorithm achieves a mean ROC-AUC of 89%, which emphasizes the skill of the model.
Rotating machinery occupies a predominant place in many industrial applications. However, rotating machines are often encountered with severe vibration problems. The measurement of these machines’ vibrations signal is of particular importance since it plays a crucial role in predictive maintenance. When the vibrations are too high, they often cause fatigue failure. They announce an unexpected stop or break and, consequently, a significant loss of productivity or an attack on the personnel’s safety. Therefore, fault identification at early stages will significantly enhance the machine’s health and significantly reduce maintenance costs. Although considerable efforts have been made to master the field of machine diagnostics, the usual signal processing methods still present several drawbacks. This paper examines the rotating machinery condition monitoring in the time and frequency domains. It also provides a framework for the diagnosis process based on machine learning by analyzing the vibratory signals.
Die Digitalisierung und Nachhaltigkeit werden die Erwartungen und Anforderungen an die Controller dauerhaft und umfassend verändern. Die Lehre hat für den Rollenwandel eine hohe Relevanz. Eine auf die veränderten Anforderungen abgestimmte Ausbildung bietet den Unternehmen die Möglichkeit, Controller mit diesen veränderte Rollenprofilen für ihre Organisation zu gewinnen. Für die Absolventen mit dem Berufswunsch Controlling sichert das veränderte Rollenprofil ihre langfristige Arbeitsmarktfähigkeit. Für den Rollenwandel selbst kann diese als Treiber verstanden werden.
Trotz der Bedeutung der Lehre für den Rollenwandel gibt es dazu bislang wenige Forschungsergebnisse zur konkreten Abbildung der Rollen in der Lehre. Es stellt sich daher die Frage, wie Hochschulen in ihren Studiengängen die Rollen grundsätzlich abbilden und mit welcher Intensität sowie Kombinationen die Rollen gelehrt werden. Diese Forschungsfrage wird anhand einer Analyse von controllingspezifischen Masterstudiengängen und deren Modulhandbücher evaluiert und diskutiert.
Im Ergebnis stellt sich der Rollenwandel in der Controllinglehre sehr heterogen dar. Es dominiert die Vermittlung der klassische Controllerrolle gefolgt von der Business Partner Rolle. Lehrinhalte bezogen auf die Rollen des digitalen Controllers oder Risikocontrollers sind schwach ausgeprägt. Für die Übernahme einer Controllerrolle im Nachhaltigkeitsmanagement existiert kaum ein Lehrangebot. Diese Ergebnisse sollen zum Diskurs über den Rollenwandel und die Gestaltung der Lehre im Controlling beitragen.
Context: The software-intensive business is characterized by increasing market dynamics, rapid technological changes, and fast-changing customer behaviors. Organizations face the challenge of moving away from traditional roadmap formats to an outcome-oriented approach that focuses on delivering value to the customer and the business. An important starting point and a prerequisite for creating such outcome-oriented roadmaps is the development of a product vision to which internal and external stakeholders can be aligned. However, the process of creating a product vision is little researched and understood.
Objective: The goal of this paper is to identify lessons-learned from product vision workshops, which were conducted to develop outcome-oriented product roadmaps.
Method: We conducted a multiple-case study consisting of two different product vision workshops in two different corporate contexts.
Results: Our results show that conducting product vision workshops helps to create a common understanding among all stakeholders about the future direction of the products. In addition, we identified key organizational aspects that contribute to the success of product vision workshops, including the participation of employees from functionally different departments.
Product roadmaps in the new mobility domain: state of the practice and industrial experiences
(2021)
Context: The New Mobility industry is a young market that includes high market dynamics and is therefore associated with a high degree of uncertainty. Traditional product roadmapping approaches such a detailed planning of features over a long-time horizon typically fail in such environments. For this reason, companies that are active in the field of New Mobility are faced with the challenge of keeping their product roadmaps reliable for stakeholders while at the same time being able to react flexibly to changing market requirements.
Objective: The goal of this paper is to identify the state of practice regarding product roadmapping of New Mobility companies. In addition, the related challenges within the product roadmapping process as well as the success factors to overcome these challenges will be highlighted.
Method: We conducted semi-structured expert interviews with 8 experts (7 German company and one Finnish company) from the field of New Mobility and performed a content analysis.
Results: Overall the results of the study showed that the participating companies are aware of the requirements that the New Mobility sector entails. Therefore, they exhibit a high level of maturity in terms of product roadmapping. Nevertheless, some aspects were revealed that pose specific challenges for the participating companies. One major challenge, for example, is that New Mobility in terms of public clients is often a tender business with non-negotiable product requirements. Thus, the product roadmap can be significantly influenced from the outside. As factors for a successful product roadmapping mainly soft factors such as trust between all people involved in the product development process and transparency throughout the entire roadmapping process were mentioned.
Context: Currently, most companies apply approaches for product roadmapping that are based on the assumption that the future is highly predicable. However, nowadays companies are facing the challenge of increasing market dynamics, rapidly evolving technologies, and shifting user expectations. Together with the adaption of lean and agile practices it makes it increasingly difficult to plan and predict upfront which products, services or features will satisfy the needs of the customers. Therefore, they are struggling with their ability to provide product roadmaps that fit into dynamic and uncertain market environments and that can be used together with lean and agile software development practices.
Objective: To gain a better understanding of modern product roadmapping processes, this paper aims to identify suitable processes for the creation and evolution of product roadmaps in dynamic and uncertain market environments.
Method: We performed a Grey Literature Review (GLR) according to the guidelines from Garousi et al.
Results: 32 approaches to product roadmapping were identified. Typical characteristics of these processes are the strong connection between the product roadmap and the product vision, an emphasis on stakeholder alignment, the definition of business and customer goals as part of the roadmapping process, a high degree of flexibility with respect to reaching these goals, and the inclusion of validation activities in the roadmapping process. An overall goal of nearly all approaches is to avoid waste by early reducing development and business risks. From the list of the 32 approaches found, four representative roadmapping processes are described in detail.
Um den Übergang von der Schule zur Hochschule zu erleichtern, brauchen Studierende technischer Fächer häufig eine Auffrischung ihrer Kenntnisse in Mathematik und Physik. Ein Online-Lernsystem für Physik kann Studierende bei der Beschäftigung mit physikalischen Inhalten unterstützen. Zudem kann ein Physik-Wissenstest Lücken im individuellen Wissensstand aufzeigen und zum Lernen der fehlenden Themen motivieren. Die Arbeitsgruppe "eLearning in der Physik" der Hochschulföderation Süd-West (HfSW) bestehend aus den baden-württembergischen Hochschulen Aalen, Esslingen, Heilbronn, Mannheim und Reutlingen hat einen Aufgabenpool von über 200 Physikaufgaben für Erstsemester erarbeitet. Sie stehen den Studierenden mit Lösungen in Lernmanagementsystemen zum Selbststudium und jetzt auch im "Zentralen Open Educational Resources Repositorium der Hochschulen in Baden-Württemberg" (ZOERR) zur Verfügung. In diesem Beitrag wird über den Einsatz der Online-Übungsaufgaben in 2020/2021 berichtet, über die Ergebnisse der Wissenstests und über die in der Corona-Zeit neu eingerichteten eTutorien.
The seamless fusion of the virtual world of information with the real physical world of things is considered the key for mastering the increasing complexity of production networks in the context of Industry 4.0. This fusion, widely referred to as the Internet of Things (IoT), is primarily enabled through the use of automatic identification (Auto-ID) technologies as an interface between the two worlds. Existing Auto-ID technologies almost exclusively rely on artificial features or identifiers that are attached to an object for the sole purpose of identification. In fact, using artificial features for the purpose of identification causes additional efforts and is not even always applicable. This paper, therefore, follows an approach of using multiple natural object features defined by the technical product information from computer-aided design (CAD) models for direct identification. By extending optical instance-level 3D-Object recognition by means of additional non-optical sensors, a multi-sensor automatic identification system (AIS) is realised, capable of identifying unpackaged piece goods without the need for artificial identifiers. While the implementation of a prototype confirms the feasibility of the approach, first experiments show improved accuracy and distinctiveness in identification compared to optical instance-level 3D-Object recognition. This paper aims to introduce the concept of multisensor identification and to present the prototype multi-sensor AIS.
Teaching at assembly workstations in production in SMEs (small and medium sized companies) often does not take place at all or only insufficiently. In addition to the lack of technical content, there are also aggravatingly incorrect movement sequences from an ergonomic point of view, which "untrained" people usually automatically acquire. An AI based approach is used to analyze a definite workflow for a specific assembly scope regarding the behavior of several employees. Based on these different behaviors, the AI gives feedback at which points in time, work steps and movement’s particularly dangerous incorrect postures occur. Motion capturing and digital human model simulation in combination with the results of the AI define the optimized workflow. Individual employees can be trained directly due to the fact that AI identifies their most serious incorrect postures and provide them with a direct analogy of their “wrong” posture and “easy on the joints posture”. With the assistance of various test persons, the AI can conduct a study in which the most frequently occurring incorrect postures can be identified. This could be realized in general or tailored to specific groups of people (e.g. "People over 1.90m tall must be particularly careful not to make the following mistake...). The approach will be tested and validated at the Werk150, the factory of the ESB Business School, on the campus of the Reutlingen University. The new gained knowledge will be used subsequently for training in SMEs.
This paper presents a machine learning powered, procedural sizing methodology based on pre-computed look-up tables containing operating point characteristics of primitive devices. Several Neural Networks are trained for 90nm and 45nm technologies, mapping different electrical parameters to the corresponding dimensions of a primitive device. This transforms the geometric sizing problem into the domain of circuit design experts, where the desired electrical characteristics are now inputs to the model. Analog building blocks or entire circuits are expressed as a sequence of model evaluations, capturing the sizing strategy and intention of the designer in a procedure, which is reusable across different technology nodes. The methodology is employed for the sizing of two operational amplifiers, and evaluated for two technology nodes, showing the versatility and efficiency of this approach.
Already more than 75 countries pledged to become climate neutral by 2050 and the share of global emissions falling into an emission pricing scheme has steeply increased over the past two years. Even where there are no direct implications for industry (yet), there is a series of subtle pressure points driving an increasing number of companies across the globe to work towards climate neutrality and pledging ambitious carbon reduction goals.
This article sheds light on what the pressure points are, what the subtle triggers and what the underlying considerations, as well as hoped-for benefits of industrial companies to achieve decarbonisation. The observations and ideas presented in this paper are derived from quantitative and qualitative data. The quantitative data was collected within the framework of Energy Efficiency Index of German Industry (EEI). The qualitative data has been collected from interviews in industrial organisations and media documents as well as from professional practice.
Not only societal, work force, supply chain and investor expectations play a large role, but also many strategic considerations which have the potential to make the business more resilient and profitable. Those companies that do not move towards decarbonisation on the other hand may face a costly late mover disadvantage.
This piece uncovers subtle interconnections helping stakeholders from industry and beyond to grasp opportunities and challenges ahead. Taking account of these calls for rethinking economic viability calculations and investment decision making. Doing so may subsequently lead to on-site carbon reduction measures being prioritised to decarbonise effectively.
Learning factories on demand
(2021)
Learning Factories are research and learning environments that demonstrate new concepts and technologies for the industry in a practical environment. The interaction between physical and virtual components is a central aspect. The mediation and presentation usually occur directly in the learning factory and are thus limited in time and concerning the user group. A learning factory- on-demand- can be provided by dividing and virtualizing the individual components via containers and microservices. This enables both local operation and operation hybrid cloud or cloud systems. Physical components can be mapped either through standardized interfaces or suitable emulators. Using the example of the Learning Factory at Reutlingen University (Werk150), it will be shown how different use cases can be made available utilizing software-based orchestration, thus promoting broader and more independent teaching.
This paper takes a holistic view on an IP-traceability process in interorganizational R&D projects, as a particular Open innovation mode, aiming at showing different technologies which can be used in the front and backend of a traceability process and discussing these technologies in terms of their suitability for data from creativity processes in these projects. To achieve this goal a two-stage literature review on different technologies in the context of traceability was conducted. Then, criteria were derived from the characteristics of data from creativity processes and of interorganizational R&D projects, with which the resulting technologies were discussed. At the end, recommendations regarding suitable technologies for tracing individual creativity artifacts in interorganizational R&D projects were given.
Die Bereitstellung klinischer Informationen im Operationssaal ist ein wichtiger Aspekt zur Unterstützung des chirurgischen Teams. Die roboter-assistierte Ösophagusresektion ist ein besonders komplexer Eingriff, der Potenzial zur workflowbasierten Unterstützung bietet. Wir präsentieren erste Ergebnisse der Entwicklung eines Checklisten-Tools mit der zugrundeliegenden Modellierung des chirurgischen Workflows und Informationsbedarf der Chirurgen. Das Checklisten-Tool zeigt hierfür die durchzuführenden Schritte chronologisch an und stellt zusätzliche Informationen kontextadaptiert bereit. Eine automatische Dokumentation von Start- und Endzeiten einzelner OP-Phasen und Schritte soll zukünftige Prozessanalysen der Operation ermöglichen.
Schema and data integration have been a challenge for more than 40 years. While data warehouse technologies are quite a success story, there is still a lack of information integration methods, especially if the data sources are based on different data models or do not have a schema. Enterprise Information Integration has to deal with heterogeneous data sources and requires up-to-date high-quality information to provide a reliable basis for analysis and decision-making. The paper proposes virtual integration using the Typed Graph Model to support schema mediation. The integration process first converts the structure of each source into a typed graph schema, which is then matched to the mediated schema. Mapping rules define transformations between the schemata to reconcile semantics. The mapping can be visually validated by experts. It provides indicators and rules to achieve a consistent schema mapping, which leads to high data integrity and quality.
Seit über 12 Jahren findet nun die Informatics Inside als Informatikkonferenz an der Hochschule Reutlingen statt, in diesem Jahr zum zweiten Mal in einem halbjährigen Rhythmus, d.h. auch im Herbst. Diese Wissenschaftliche Konferenz des Masterstudiengangs Human-Centered Computing wird von den Studierenden selbst organisiert und durchgeführt. Sie erhalten während ihres Masterstudiums die Gelegenheit sich in einem selbstgewählten Fachthema zu vertiefen. Dies kann an der Hochschule, in einem Unternehmen, einem Forschungsinstitut oder im Ausland durchgeführt werden. Gerade diese flexible Ausgestaltung des Moduls „Wissenschaftliche Vertiefung“ führt zu einem sehr breiten Themenspektrum, das von den Studierenden bearbeitet wird. Neben der eigentlichen fachlichen Vertiefung spielt auch die Präsentation und Verteidigung von wissenschaftlichen Ergebnissen eine wichtige Rolle und dies weit über das Studium hinaus. Ein gewähltes Fachgebiet so allgemeinverständlich aufzubereiten und zu vermitteln, dass es auch für Nicht-Spezialisten verständlich wird, stellt immer wieder eine besondere Herausforderung dar. Dieser Herausforderung stellen sich die Studierenden im Rahmen der Herbstkonferenz zur Wissenschaftlichen Vertiefung am 24. November 2021. Bereits zum vierten Mal wird die Veranstaltung in einem online-Modus stattfinden, einschließlich eines virtuellen Begleitprogramms.
Das Themenspektrum der diesjährigen Herbstkonferenz ist wieder sehr vielfältig und breit gefächert. So erwarten Sie u.a. Beiträge aus dem Gesundheitssektor, dem Maschinellen Lernen, der KI und VR sowie dem Marketing und E-Learning. Allen gemein ist ein sehr starker Bezug zu innovativen Informatikansätzen, was sich auch in dem Wortspiel und Motto „RockIT Science“ der Konferenz widerspiegelt. Die Informatik durchdringt fast alle beruflichen und privaten Anwendungsbereiche und hat zunehmend größeren Einfluss auf unser tägliches Leben. Dies kann einerseits Besorgnis und andererseits Begeisterung auslösen. Gerade letzteres wollen die Studierenden mit Ihren Beiträgen erreichen und es auch mal im Informatiksektor „rocken“ lassen.
Der Masterstudiengang Human-Centered Computing der Hochschule Reutlingen ist geprägt durch die Zusammenarbeit von Mensch und Computer. Eine wichtige Rolle an der Schnittstelle spielt die Sensorik, die der diesjährigen Konferenz Informatics Inside das Motto „perceive(it)“ verleiht. Dabei hebt das Wortspiel „it“ für die Informationstechnologie und die englische Übersetzung des Personalpronomens „es“ die Dualität der Wahrnehmung der Informationstechnologie durch den Menschen und der Realität durch den Computer hervor. Das Spannungsfeld zwischen künstlichen Sinneserweiterungen und der intelligenten Verarbeitung von Sensordaten ermöglicht unzählige Anwendungen für digitale Medien, virtuelle Welten, realitätsnahe Simulationen, computergestützte Arbeitsprozesse sowie intelligente Assistenzsysteme in der Produktion, im Haushalt, in der Medizin und in der Mobilität. Meine Aufmerksamkeit gilt hierbei der praxisnahen Forschung als Motor für diesen technischen Fortschritt.
Context: The manufacturing industry is facing a transformation with regard to Industry 4.0 (I4). A transformation towards full automation of production including a multitude of innovations is necessary. Startups and entrepreneurial processes can support such a transformation as has been shown in other industries. However, I4 has some specifics, so it is unclear how entrepreneurship can be adapted in I4. Understanding these specifics is important to develop suitable training programs for I4 startups and to accelerate the transformation.
Objective: This study identifies and outlines the essential characteristics and constraints of entrepreneurial processes in I4.
Method: 14 semi-structured interviews were conducted with experts in the field of I4 entrepreneurship. The interviews were analysed and categorized by qualitative analyses.
Results: The interviews revealed several characteristics of I4 that have a significant impact on the various phases of the entrepreneurial process. Examples of such specifics include the difficult access to customers, the necessary deep understanding of the customer and the domain, the difficulty of testing risky assumptions, and the complex development and productization of solutions. The complexity of hardware and software components, cost structures, and necessary customer-specific customizations affect the scalability of I4 startups. These essential characteristics also require specialised skills and resources from I4 startups.
This paper presents an improvement in usability and integrity of simulation-based analog circuit sizing. Instead of using geometrical sizing parameters (width, length), a transformed design-space, consisting exclusively of electrical parameters (branch currents, efficiencies and speed) is utilized. This design-space is explored more efficiently by optimizers. Moreover, this design-space can be reduced without affecting the quality of the result. The method is illustrated on two application examples, a symmetrical and a miller operational amplifier. Sizing the circuits using the transformed design-space showed significant reduction in required circuit simulations (up to 11x faster), better convergence, without loss in quality.
Identifikation von Schlaf- und Wachzuständen durch die Auswertung von Atem- und Bewegungssignalen
(2021)
How to prioritize your product roadmap when everything feels important: a grey literature review
(2021)
Context: A key factor in achieving product success is to identify what and in which order outputs must be launched in order to deliver the most value to the customer and the business. Therefore, a well-established process to discover and prioritize the content of the product roadmap in the right way is crucial for the success of a company. However, most companies prioritize their product roadmap items based on opinions of experts or the management. Additionally, increasing market dynamics, rapidly evolving technologies and fast changing customer behavior complicate the conduction of the prioritization process. Therefore, many companies are struggling to finding and establishing suitable techniques for prioritizing their product roadmap.
Objective: In order to gain a better understanding of the prioritization process in a dynamic and uncertain market environment, this paper aims to identify suitable techniques for the prioritization in such environments.
Method: We conducted a Grey Literature Review according to the guidelines of Garousi et al.
Results: 18 techniques for the prioritization of the product roadmap could be identified. 15 techniques are primarily used to prioritize outputs by considering factors such as the expected impact or effort. Two technique are most suitable for prioritizing risky assumptions that need to be validated and one technique focuses on the prioritization of outcomes. All techniques have in common that they should be conducted as cross-functional team activity in order to include different perspectives in the prioritization process.
Near-Data Processing is a promising approach to overcome the limitations of slow I/O interfaces in the quest to analyze the ever-growing amount of data stored in database systems. Next to CPUs, FPGAs will play an important role for the realization of functional units operating close to data stored in non-volatile memories such as Flash.It is essential that the NDP-device understands formats and layouts of the persistent data, to perform operations in-situ. To this end, carefully optimized format parsers and layout accessors are needed. However, designing such FPGA-based Near-Data Processing accelerators requires significant effort and expertise. To make FPGA-based Near-Data Processing accessible to non-FPGA experts, we will present a framework for the automatic generation of FPGA-based accelerators capable of data filtering and transformation for key-value stores based on simple data-format specifications.The evaluation shows that our framework is able to generate accelerators that are almost identical in performance compared to the manually optimized designs of prior work, while requiring little to no FPGA-specific knowledge and additionally providing improved flexibility and more powerful functionality.
Facial beauty prediction (FBP) aims to develop a machine that automatically makes facial attractiveness assessment. In the past those results were highly correlated with human ratings, therefore also with their bias in annotating. As artificial intelligence can have racist and discriminatory tendencies, the cause of skews in the data must be identified. Development of training data and AI algorithms that are robust against biased information is a new challenge for scientists. As aesthetic judgement usually is biased, we want to take it one step further and propose an Unbiased Convolutional Neural Network for FBP. While it is possible to create network models that can rate attractiveness of faces on a high level, from an ethical point of view, it is equally important to make sure the model is unbiased. In this work, we introduce AestheticNet, a state-of-the-art attractiveness prediction network, which significantly outperforms competitors with a Pearson Correlation of 0.9601. Additionally, we propose a new approach for generating a bias-free CNN to improve fairness in machine learning.
Context: Nowadays, companies are challenged by increasing market dynamics, rapid changes and disruptive participants entering the market. To survive in such an environment, companies must be able to quickly discover product ideas that meet the needs of both customers and the company and deliver these products to customers. Dual-track agile is a new type of agile development that combines product discovery and delivery activities in parallel, iterative, and cyclical ways. At present, many companies have difficulties in finding and establishing suitable approaches for implementing dual-track agile in their business context.
Objective: In order to gain a better understanding of how product discovery and product delivery can interact with each other and how this interaction can be implemented in practice, this paper aims to identify suitable approaches to dual-track agile.
Method: We conducted a grey literature review (GLR) according to the guidelines to Garousi et al.
Results: Several approaches that support the integration of product discovery with product delivery were identified. This paper presents a selection of these approaches, i.e., the Discovery-Delivery Cycle model, Now-Next-Later Product Roadmaps, Lean Sprints, Product Kata, and Dual-Track Scrum. The approaches differ in their granularity but are similar in their underlying rationales. All approaches aim to ensure that only validated ideas turn into products and thus promise to lead to products that are better received by their users.
This paper presents a generic method to enhance performance and incorporate temporal information for cardiorespiratory-based sleep stage classification with a limited feature set and limited data. The classification algorithm relies on random forests and a feature set extracted from long-time home monitoring for sleep analysis. Employing temporal feature stacking, the system could be significantly improved in terms of Cohen’s κ and accuracy. The detection performance could be improved for three classes of sleep stages (Wake, REM, Non-REM sleep), four classes (Wake, Non-REM-Light sleep, Non-REM Deep sleep, REM sleep), and five classes (Wake, N1, N2, N3/4, REM sleep) from a κ of 0.44 to 0.58, 0.33 to 0.51, and 0.28 to 0.44 respectively by stacking features before and after the epoch to be classified. Further analysis was done for the optimal length and combination method for this stacking approach. Overall, three methods and a variable duration between 30 s and 30 min have been analyzed. Overnight recordings of 36 healthy subjects from the Interdisciplinary Center for Sleep Medicine at Charité-Universitätsmedizin Berlin and Leave-One-Out-Cross-Validation on a patient-level have been used to validate the method.
This paper describes the analysis of day-ahead power market data from the European Power Exchange (EPEX) SPOT over a period of 17 months till October 2020 and the forecasting model for electricity prices. High volatility of the DE-LU (Germany and Luxembourg) power market in order to improve the planning of the bidding strategy and maximize benefits was reflected. Forecasting models based on the Autoregressive Integrated Moving Average (ARIMA) approach and artificial neural networks are developed to predict Day-Ahead prices up to a week ahead. Models are built for a virtual power plant Neckar-Alb and will be used as a part of an optimization tool for the operationtimetable of connected distributed energy devices
Die zunehmende Technologie- und Produktkomplexität führen dazu, dass sich immer mehr Unternehmen für ihre F&E mit externen Organisationen vernetzen. So entstehen interorganisationale F&E-Projekte, welche temporäre Organisationen darstellen. Forschungsfragen zu diesen Projekten sind u.a. hinsichtlich der Praktiken und Verhaltensregeln offen. Über ein kulturbewusstes Projektmanagement können kooperations- und innovationsförderliche Praktiken und Verhaltensregeln aufgebaut werden, die für diese F&E-Projekte essenziell sind. So ist die Forschungsfrage dieses Beitrags, wie ein projektkulturbewusstes Management interorganisationaler F&E-Projekte erfolgen kann. Dafür wird auf Basis der theoretischen Grundlagen zum F&E-Projektmanagement, zu menschlichen Handlungssystemen und Ebenen der Zusammenarbeit, zu Kultur und Verhalten ein projektkulturbewusstes Management-Modell entwickelt. Das Modell umfasst zwei Teile. Im ersten Teil wird der Bereich aufgezeigt, in welchem sich die Projektkultur entwickelt. Im zweiten Teil wird aufgezeigt, wie die Faktoren für ein wahrscheinlich kooperatives und innovatives Verhalten innerhalb dieses Bereiches gestaltet werden sollten.
The strong demand to transform the textile and fashion industry towards sustainability requires continuous implementation of the Education for Sustainable Development (ESD) mission statement in education and industry. To achieve this goal, the European research project "Fashion DIET - Sustainable Fashion Curriculum at Textile Universities in Europe. Development, Implementation and Evaluation of a Teaching Module for Educators", co-funded by the Erasmus+ programme of the European Union (2020-1-DE01-KA203-005657), aims to create an ESD module for university lecturers and research-based teaching and learning materials delivered through an e-learning portal. First, an online questionnaire was rolled out to assess university faculty attitudes toward and needs for ESD content and methods. The feedback questionnaire enabled the selection of the most relevant data for the elaboration of an action and research-oriented professional development module for ESD in textile education, which will be accessible through an information & e-learning portal. The e-learning portal can be used as a web-based tool to apply and evaluate the project outcomes, e.g. the further education module and the teaching and learning materials for educators, such as manuals, broadcasts and the provision of interactive and physical materials. It thus ensures that the teaching materials can be used sustainably in the classroom. It also provides country-specific data for the fashion and textile industry and its market, taking into account the different perspectives of universities and schools. In any case, the portal represents (1) the web-based platform to support the dissemination of ESD as a guiding principle and (2) a central contact point for the target group to obtain relevant information on ESD. Fashion DIET explores the use of e-learning to improve teaching and learning on ESD, by training educators and empowering them as multipliers for a sustainable textile and fashion industry. At a higher level, the European project strengthens the quality and relevance of learning provision in education towards the latest developments in textile research and innovation in terms of a more sustainable fashion.
Reacting to ever-changing business environments, in the last decade complex systems of systems accomplished giant leaps forward leading to great technological flexibility. However, this dimension of flexibility is often limited by the rigidity of super-ordinated planning systems. Especially when hybrid teams of automated and human resources are in place, the dynamic assignment of tasks taking into account ergonomics remains a challenge. After exposing a gap in the state of the art on the topic, this paper presents an approach to include ergonomics in dynamic resource allocation models. Combining and complementing existing approaches, the presented method monitors the actual ergonomic burden of the resources during a shift and it provides a linear optimization model to steer the resource allocation process.
By 2019, Germany-based Kärcher, “the world’s leading provider of cleaning technology,” had turned its professional cleaning devices into IoT products. The data generated by these IoT-connected cleaning devices formed a key ingredient in the company’s ongoing strategic shift in its B2B business: Kärcher was transforming from a seller of cleaning devices to a provider of consulting services in order to help professional cleaning companies improve their cleaning processes. Based on interviews with seven IT- and non-IT executives, the case illustrates how the company learned to generate value from IoT products. And it demonstrates how a family-owned company transformed its organization in order to be able to more effectively develop and provide IoT products, while adding roles, developing technology platforms, and changing organizational structures and ways of working.
The disruptive potential of digital transformation (DT) has been widely discussed in scholarly literature and practitioner-oriented discourses. The management control (MC) function is an important corporate function, as it provides transparency on the economic situation of a firm. DT challenges MC in a two-fold and reciprocal nature as it (i) changes the MC function itself as well as (ii) the entire firm and its business models, which needs to be accompanied by the MC function. Given the complexity and variety of phenomena within the developments in the context of DT, a comprehensive management approach is essential. Surprisingly, there exist few convincing approaches, which support a comprehensive management of the DT. The objectives of this paper are therefore to discuss the impact of DT on MC, as well as, to develop a framework to control DT of an organization from a MC perspective. Based on a literature review and conceptual research, our study contributes to knowledge by proposing an initial, preliminary conceptual framework to manage DT, from a MC perspective. The framework highlights important dimensions that should be considered in the management of DT, for example related to processes and MC instruments.
Prior to the introduction of AI-based forecast models in the procurement department of an industrial retail company, we assessed the digital skills of the procurement employees and surveyed their attitudes toward a new digital technology. The aim of the survey was to ascertain important contextual factors which are likely to influence the acceptance and the successful use of the new forecast tool. What we find is that the digital skills of the employees show an intermediate level and that their attitudes toward key aspects of new digital technologies are largely positive. Thus, the conditions for high acceptance and the successful use of the models are good, as evidenced by the high intention of the procurement staff to use the models. In line with previous research, we find that the perceived usefulness of a new technology and the perceived ease of use are significant drivers of the willingness to use the new forecast tool.