Refine
Document Type
- Conference proceeding (222) (remove)
Language
- English (222) (remove)
Is part of the Bibliography
- yes (222)
Institute
- Technik (120)
- Informatik (83)
- ESB Business School (18)
- Texoversum (1)
Publisher
- IEEE (222) (remove)
Non-fungible tokens (NFTs) are unique digital assets that have recently gained significant popularity, particularly in the digital art sector. The success of NFTs and other blockchain-based innovations depends on their ac-acceptance and use by consumers. This study aims to understand the impact of moral values on the acceptance of NFTs. Based on a quantitative survey with over 800 complete responses, the analysis shows that moral aspects of NFTs are indeed important for potential users. However, there is an attitude-behavior gap, as the positive impact of moral values on the intention to use NFTs is not reflected in the actual current usage of NFTs by the respondents. This study contributes to knowledge by providing new empirical data on the acceptance of NFTs and highlighting the role of moral values on the acceptance decision.
Bootstrap circuits are mainly used for supplying a gate driver circuit to provide the gate overdrive voltage for a high-side NMOS transistor. The required charge has to be provided by a bootstrap capacitor which is often too large for integration if an acceptable voltage dip at the capacitor has to be guaranteed. Three options of an area efficient bootstrap circuit for a high side driver with an output stage of two NMOS transistors are proposed. The key idea is that the main bootstrap capacitor is supported by a second bootstrap capacitor, which is charged to a higher voltage and connected when the gate driver turns on. A high voltage swing at the second capacitor leads to a high charge allocation. Both bootstrap capacitors require up to 70% less area compared to a conventional bootstrap circuit. This enables compact power management systems with fewer discrete components and smaller die size. A calculation guideline for optimum bootstrap capacitor sizing is given. The circuit was manufactured in a 180nm high-voltage BiCMOS technology as part of a high-voltage gate driver. Measurements confirm the benefit of high-voltage charge storing. The fully integrated bootstrap circuit including two stacked 75.8pF and 18.9pF capacitors results in a voltage dip lower than 1V. This matches well with the theory of the calculation guideline.
Size and cost of a boost converter can be minimized by reducing the voltage overshoot and fastening the transient response in case of load transient. The presented technique improves the transient response of a current mode controlled boost converter, which usually suffers from bandwidth limitation because of its right-half-plane zero (RHPZ). The proposed technique comprises a load current estimation which works as part of a digital controller without any additional measurements. Based on the latest load estimation the controller parameters are adapted, achieving small voltage overshoot and fast transient response. The presented technique was implemented in a digital control circuit, consisting of an ASIC in a 110 nm-technology, a Xilinx Spartan-6 field programmable gate array (FPGA), and a TI-ADS8422 analog to-digital-converter (ADC). Simulation and measurements of a 4V-to-6.3V, 500mA boost converter show an improvement of 50% in voltage overshoot and response time to load transient.
The EU funded project RobLog recently developed a system able to autonomously unload coffee sacks from a standard container. Being the first of its kind, a further development is needed in order for the system to be competitive against manual labor. Financing this development entails a risk, hence a justified skepticism, which can be overcome by the longsighted view of the existing market potential. This paper presents a method to estimate the market potential of autonomous unloading systems for heavy deformable goods. Starting from the analysis of the coffee trade, first the current coffee traffic is investigated in order to calculate the number of autonomous systems needed to handle the imported sacks; Results are validated and the method is extended for the calculation of the potential of other market segments, where the same unloading technology can be applied.
According to several surveys and statistics, the great majority of companies previously not accustomed to automation are piloting solutions to automate business processes. Those accustomed to automation also attempt to introduce more of it, focusing on automation-unfriendly processes that remained manual. However, when the decision on what and whether to automate is not trivial for evident reasons, even industry leaders may get stuck on an overwhelming question: where to begin automating? The question remains too often unanswered as state-of-the-art methods fail to consider the whole picture. This paper introduces a holistic approach to the decision-making for investments in automation. The method supports the iterative analysis and evaluation of operative processes, providing tools for a quantitative approach to the decision-making. Thanks to the method, a large pool of processes can be first considered and then filtered out in order to select the one that yields the best value for the automation in the specific context. After introducing the method, a case study is reported for validation before the discussion.
DMOS transistors often suffer from substantial self-heating during high power dissipation, which can lead to thermal destruction if the device temperature reaches excessive values. A successfully demonstrated method to reduce the peak temperature is the redistribution of power dissipation density from the hotter to the cooler device areas by careful layout modification. However, this is very tedious and time-consuming if complex-shaped devices as often found in industrial applications are considered.
This paper presents an approach for fully automatic layout optimization which requires only a few hours processing time. The approach is applied to complex shaped test structures which are investigated by measurements and electro-thermal simulations. Results show a significantly lower peak temperature and an energy capability gain of 84 %, offering potential for a 18 % size reduction of active area.
While Microservices promise several beneficial characteristics for sustainable long-term software evolution, little empirical research covers what concrete activities industry applies for the evolvability assurance of Microservices and how technical debt is handled in such systems. Since insights into the current state of practice are very important for researchers, we performed a qualitative interview study to explore applied evolvability assurance processes, the usage of tools, metrics, and patterns, as well as participants’ reflections on the topic. In 17 semi-structured interviews, we discussed 14 different Microservice-based systems with software professionals from 10 companies and how the sustainable evolution of these systems was ensured. Interview transcripts were analyzed with a detailed coding system and the constant comparison method.
We found that especially systems for external customers relied on central governance for the assurance. Participants saw guidelines like architectural principles as important to ensure a base consistency for evolvability. Interviewees also valued manual activities like code review, even though automation and tool support was described as very important. Source code quality was the primary target for the usage of tools and metrics. Despite most reported issues being related to Architectural Technical Debt (ATD), our participants did not apply any architectural or service-oriented tools and metrics. While participants generally saw their Microservices as evolvable, service cutting and finding an appropriate service granularity with low coupling and high cohesion were reported as challenging. Future Microservices research in the areas of evolution and technical debt should take these findings and industry sentiments into account.
This paper reports an analysis of application and impact of FMEA on susceptibility of generic IT-networks. It is not new that in communication system, the frequency and the data transmission rate play a very important role. The rapid increase in miniaturization of electronic devices leads to very sensitivity against electromagnetic interference. Since the IT network with the data transfer rate makes a huge contribution to this development it is very important to monitor their functionality. Therefore, tests are performed to observe and ensure the data transfer rate of IT networks against IEMI. A fault tree model is presented and observed effects during radiation of disturbance on complex system by a HPEM interference sources are described using a continuous and consistent model of the physical layer to the application layer.
Steady state efficiency optimization techniques for induction motors are state of the art and various methods have already been developed. This paper provides new insights in the efficiency optimized operation in dynamic regime. The paper proposes an anticipative flux modification in order to decrease losses during torque and speed transients. These trajectories are analyzed based on a numerical study for different motors. Measurement results for one motor are given as well.
Modern wide bandgap power devices promise higher power conversion performance if the device can be operated reliably. As switching speed increases, the effects of parasitic ringing become more prominent, causing potentially damaging overvoltages during device turn-off. Estimating the expected additional voltage caused by such ringing enables more reliable designs. In this paper, we present an analytical expression to calculate the expected overvoltage caused by parasitic ringing based on parasitic element values and operating point parameters. Simulations and measurements confirm that the expression can be used to find the smallest rise time of the switches’ drain-source voltage for minimum overvoltage. The given expression also allows the prediction of the trade off overvoltage amplitude in case of faster required rise times.
The possibility to bring the interference source, close to the potential target is characterized by the property of the source as stationary, portable, mobile, very mobile and highly mobile [3]. Starting from the existing and well-known IEME interference or IEMI (Intentional Electromagnetic Interference) and the already existing classifications an analysis of methods based on a comparative study of the methods used to classify the intentional EM environment is carried out, which takes into account the frequency, the cost, the amplitude of the noise signal, the radiated power and the energy of a pulse of radiation.
This paper enhances SWARM, a novel deterministic analog layout automation approach based on the idea of cellular automata. SWARM implements a decentralized interaction model in which responsive layout modules, covering basic circuit types, autonomously move, rotate and deform themselves to let constraint-compliant, compact layout solutions emerge from a synergetic flow of self-organization. With the ability to consider design constraints both implicitly and explicitly, SWARM joins the layout quality of procedural generators with the flexibility of optimization algorithms, combining these two kinds of automation into a “bottom-up meets top-down” flow. The new enhancements are demonstrated in an OTA example, depicting the power of SWARM and its enormous potential for future developments.
An ultra-low power capacitance extrema and ratio detector for electrostatic energy harvesters
(2015)
The power supply is one of the major challenges for applications like internet of things IoTs and smart home. The maintenance issue of batteries and the limited power level of energy harvesting is addressed by the integrated micro power supply presented in this paper. Connected to the 120/230 Vrms mains, which is one of the most reliable energy sources and anywhere indoor available, it provides a 3.3V DC output voltage. The micro power supply consists of a fully integrated ACDC and DCDC converter with one external low voltage SMD buffer capacitor. The micro power supply is fabricated in a low cost 0.35 μm 700 V CMOS technology and covers a die size of 7.7 mm2. The use of only one external low voltage SMD capacitor, results in an extremely compact form factor. The ACDC is a direct coupled, full wave rectifier with a subsequent bipolar shunt regulator, which provides an output voltage around 17 V. The DCDC stage is a fully integrated 4:1 SC DCDC converter with an input voltage as high as 17 V and a peak efficiency of 45 %. The power supply achieves an overall output power of 3 mW, resulting in a power density of 390 μW/mm2. This exceeds prior art by a factor of 11.
This paper presents a compact four-arm spiral antenna, which may be used in direction-finding applications but also mobile communication systems. The antenna is fed sequentially at its outside-ends using a sequential phase network embedded in grounded multilayer dielectric media. Sequential rotation is applied to generate the axial mode M1 but also the conical mode M2 in the same frequency band. The antenna exhibits good radiation characteristics in the frequency band of interest.
This paper presents a laboratory experiment integrating the fields of electronics design, power electronics and drive control. The aim of this experiment is first to illustrate the need for a deep knowledge and the challenges in power electronics and its applications, in this particular case for drive control. The different tasks in this experiment are executed on a complete setup for a brushless dc motor test bench. The tasks assigned to the students are designed such that, in some tasks the knowledge from a particular field, power electronics, electronic design or drive control is deepened, whereas in other tasks the knowledge from more than one of these fields is needed to solve the given problem. Thus, the experiment trains students in the particular domains but illustrates as well the links between power electronics, electronic design and drive control.
For a long time, most discrete accelerators have been attached to host systems using various generations of the PCI Express interface. However, with its lack of support for coherency between accelerator and host caches, fine-grained interactions require frequent cache-flushes, or even the use of inefficient uncached memory regions. The Cache Coherent Interconnect for Accelerators (CCIX) was the first multi-vendor standard for enabling cache-coherent host-accelerator attachments, and already is indicative of the capabilities of upcoming standards such as Compute Express Link (CXL). In our work, we compare and contrast the use of CCIX with PCIe when interfacing an ARM-based host with two generations of CCIX-enabled FPGAs. We provide both low-level throughput and latency measurements for accesses and address translation, as well as examine an application-level use-case of using CCIX for fine-grained synchronization in an FPGA-accelerated database system. We can show that especially smaller reads from the FPGA to the host can benefit from CCIX by having roughly 33% shorter latency than PCIe. Small writes to the host have a latency roughly 32% higher than PCIe, though, since they carry a higher coherency overhead. For the database use-case, the use of CCIX allowed to maintain a constant synchronization latency even with heavy host-FPGA parallelism.
This paper presents an efficient implementation of a reconfigurable battery stack which allows full exploitation of the capacity of every single cell. Contrary to most other approaches, it is possible to electrically remove one or more cells from the battery stack. Therefore, the overall capacity of the system is not restricted by the weaker cells, and cells with very different states of health can be used, making the system very attractive for refurbished batteries. For the required switches, low-voltage high-current MOSFETs are used. A demonstrator has been built with a total capacity of up to 3.5 kWh, a nominal voltage of 35 V, and currents up 200 A.
An assessment model to foster the adoption of agile software product lines in the automotive domain
(2018)
A software product line is commonly used for the software development in large automotive organizations. A strategic reuse of software is needed to handle the increasing complexity of the development and to maintain the quality of numerous software variants. However, the development process needs to be continuously adapted at a fast pace to satisfy the changing market demands. Introducing agile software development methods promise the flexibility to react on customers’ change requests and market demands to deliver high quality software. Despite this need, it is still challenging to combine agile software development and product lines. The maturity of an agile adoption is often hard to determine. Assessing the current situation regarding the combination is a first step towards a successful inclusion of agile methods into automotive software product lines. Based on an interview study with 16 participants and a literature review, we build the so-called ASPLA Model allowing self-assessments within the team to determine the current state of agile software development in combination with software product lines. The model comprises seven areas of improvement and recommends a possibility to improve the current status.
Gallium nitride high electron mobility transistors (GaN-HEMTs) have low capacitances and can achieve low switching losses in applications where hard turn-on is required. Low switching losses imply a fast switching; consequently, fast voltage and current transients occur. However, these transients can be limited by package and layout parasitics even for highly optimized systems. Furthermore, a fast switching requires a fast charging of the input capacitance, hence a high gate current.
In this paper, the switching speed limitations of GaN-HEMTs due to the common source inductance and the gate driver supply voltage are discussed. The turn-on behavior of a GaN-HEMT is simulated and the impact of the parasitics and the gate driver supply voltage on the switching losses is described in detail. Furthermore, measurements are performed with an optimized layout for a drain-source voltage of 500 V and a drain-source current up to 60 A.
Enterprises and information societies confront crucial challenges currently, while Industry 4.0 becomes important in the global manufacturing industry and Society 5.0 should contribute to a supersmart society, especially for healthcare. Physical activity monitoring digital platforms are architected to improve the healthcare status of patients with diabetes and other lifestyle-related diseases. Furthermore, digital platforms are expected to generate profits for health technology companies and help control costs in the healthcare ecosystem. However, current digital enterprise architecture approaches are not well-established, and the potentials have not yet been realized. Design thinking approach and agile software development methodologies can overcome these limitations, beginning with proof of concept and pilot projects and then scaling to the production environment. In this paper, we describe how that the adaptive integrated digital architecture framework (AIDAF) for Design Thinking approach is proposed and verified in a case of a university hospital in the Americas. In addition, challenges and future activities for this area are discussed that cover the directions for Society 5.0.
We propose a novel technique to compensate the effects of R-C / gm-C time-constant (TC) errors due to process variation in continuous-time delta-sigma modulators. Local TC error compensation factors are shifted around in the modulator loop to positions where they can be implemented efficiently with tunable circuit structures, such as current-steering digital-to-analog converters (DAC). This approach constitutes an alternative or supplement to existing compensation techniques, including capacitor or gm tuning. We apply the proposed technique to a third-order, single-bit, low-pass continuous-time delta-sigma modulator in cascaded integrator feedback structure. A feedback path tuning scheme is derived analytically and confirmed numerically using behavioral simulations. The modulator circuit was implemented in a 0.35-μm CMOS process using an active feedback coefficient tuning structure based on current-steering DACs. Post-layout simulations show that with this tuning structure, constant performance and stable operation can be obtained over a wide range of TC variation.
Large critical systems, such as those created in the space domain, are usually developed by a large number of organizations and, furthermore, they have to comply with standards. Yet, the different stakeholders often do not have a common understanding of the needed quality of requirements specifications. Achieving such a common understanding is a laborious process that is currently not sufficiently supported. Moreover, such a common understanding must be aligned with the standards. In this paper, we present an approach that can be used to align the different stakeholder perceptions regarding the quality of requirements specifications. Existing quality models for requirements specifications are analyzed for equivalences, and transferred into a common representation, the so-called Aligned Quality Map (AQM). Furthermore, a process is defined that supports the alignment of different stakeholder perspectives with regard to the quality of requirements specifications using AQM, which is validated in a case study in the context of European space projects. AQM has been created and populated with an initial set of quality models. It is designed in such way that it can be extended to include further quality models. The case study has shown that an alignment of different stakeholder perspectives and the quality model of the European Cooperation for Space Standardization using AQM is feasible. The approach allows for aligning different stakeholder perspectives for a common understanding of the quality of requirements specifications in the context of standards. Furthermore, AQM supports the assessment of requirements specifications.
Providing a digital infrastructure, platform technologies foster interfirm collaboration between loosely coupled companies, enabling the formation of ecosystems and building the organizational structure for value co-creation. Despite the known potential, the development of platform ecosystems creates new sources of complexity and uncertainty due to the involvement of various independent actors. For a platform ecosystem to succeed, it is essential that the platform ecosystem participants are aligned, coordinated, and given a common direction. Traditionally, product roadmaps have served these purposes during product development. A systematic mapping study was conducted to better understand how product roadmapping could be used in the dynamic environment of platform ecosystems. One result of the study is that there are hardly any concrete approaches for product roadmapping in platform ecosystems so far. However, many challenges on the topic are described in the literature from different perspectives. Based on the results of the systematic mapping study, a research agenda for product roadmapping in platform ecosystems is derived and presented.
Advancing mental health diagnostics: AI-based method for depression detection in patient interviews
(2023)
In this paper, we present a novel artificial intelligence (AI) application for depression detection, using advanced transformer networks to analyse clinical interviews. By incorporating simulated data to enhance traditional datasets, we overcome limitations in data protection and privacy, consequently improving the model’s performance. Our methodology employs BERT-based models, GPT-3.5, and ChatGPT-4, demonstrating state-of-the-art results in detecting depression from linguistic patterns and contextual information that significantly outperform previous approaches. Utilising the DAIC-WOZ and Extended-DAIC datasets, our study showcases the potential of the proposed application in revolutionising mental health care through early depression detection and intervention. Empirical results from various experiments highlight the efficacy of our approach and its suitability for real-world implementation. Furthermore, we acknowledge the ethical, legal, and social implications of AI in mental health diagnostics. Ultimately, our study underscores the transformative potential of AI in mental health diagnostics, paving the way for innovative solutions that can facilitate early intervention and improve patient outcomes.
SmartLife ecosystems are emerging as intelligent user-centered systems that will shape future trends in technology and communication. Biological metaphors of living adaptable ecosystems provide the logical foundation for self-optimizing and self-healing run-time environments for intelligent adaptable business services and related information systems with service-oriented enterprise architectures. The present research in progress work investigates mechanisms for adaptable enterprise architectures for the development of service-oriented ecosystems with integrated technologies like Semantic Technologies, Web Services, Cloud Computing and Big Data Management. With a large and diverse set of ecosystem services with different owners, our scenario of service-based SmartLife ecosystems can pose challenges in their development, and more importantly, for maintenance and software evolution. Our research explores the use of knowledge modeling using ontologies and flexible metamodels for adaptable enterprise architectures to support program comprehension for software engineers during maintenance and evolution tasks of service-based applications. Our previous reference enterprise architecture model ESARC -- Enterprise Services Architecture Reference Cube -- and the Open Group SOA Ontology was extended to support agile semantic analysis, program comprehension and software evolution for a SmartLife applications scenario. The Semantic Browser is a semantic search tool that was developed to provide knowledge-enhanced investigation capabilities for service-oriented applications and their architectures.
This contribution presents a three-phase power stage for motor control with continuous output voltages using wide bandgap semiconductors and an asynchronous delta-sigma based switching signal generation. The focus of the paper is on an active damping approach for the LC output filter based on inductor current feedback.
This paper illustrates the implementation of series connected hardware modules as part of a scalable and modular power electronics device, which is ideally suited in the field of electric vehicles using wide bandgap semiconductor devices. The main benefit of the modular concept is that different current or voltage requirements can be satisfied based on the appropriate series or parallel connection of single modules. The particular design is based on the fact that the single modules generate a continuous and specified output voltage from a given dc voltage. The current work focuses on a brief classification of this work in different series connected concepts of power converters and in particular on an active damping approach for the series connected LC output filters based on inductor current feedback.
Reliable and accurate car driver head pose estimation is an important function for the next generation of advanced driver assistance systems that need to consider the driver state in their analysis. For optimal performance, head pose estimation needs to be non-invasive, calibration-free and accurate for varying driving and illumination conditions. In this pilot study we investigate a 3D head pose estimation system that automatically fits a statistical 3D face model to measurements of a driver’s face, acquired with a low-cost depth sensor on challenging real-world data. We evaluate the results of our sensor-independent, driver-adaptive approach to those of a state-of-the-art camera-based 2D face tracking system as well as a non-adaptive 3D model relative to own ground-truth data, and compare to other 3D benchmarks. We find large accuracy benefits of the adaptive 3D approach.
Information systems, which support the workflow in the clinical area, are currently limited to organizational processes. This work shows a first approach of an information system supporting all actors in the perioperative area. The first prototype and proof of concept was a task manager, giving all actors information about their task and the task of all other actors during an intervention. Based on this initial task manager, we implemented an information system based on a workflow engine controlling all processes and all information necessary for the intervention. A second part was the development of a perioperative process visualization which was developed based on a user centered approach jointly with clinicians and OR members.
A simple determination of the error voltage compensation map for motor parameter identification
(2018)
This paper proposes a new method for determining the error voltage compensation map in a parameter identification procedure of three-phase induction motors with an inverter. The compensation curve depending on the motor current is determined using a simple procedure based on given reference voltage steps and the corresponding steady state values of the stator current of the induction motor.
This paper presents a measurement setup and an assembly technique suitable for characterization of power semiconductor devices under very high temperature conditions exceeding 500°C. An important application of this is the experimental investigation of wide bandgap semiconductors. Measurement results are shown for a 1200V SiC MOSFET and a 650V depletion mode GaN HEMT.
In analog layout design, chip floorplans are usually still handcrafted by human experts. Particularly, the nondiscrete variability of block dimensions must be exploited thereby, which is a serious challenge for optimization-based algorithmic floorplanners. This paper presents a fundamentally new automation approach based on self-organization, in which floorplan blocks can autonomously move, rotate and deform themselves to jointly let compact results emerge from a synergistic flow of interaction. Our approach is able to minimize area and wirelength, supports nonslicing floorplan structures, can consider fully variable block dimensions, accounts for a fixed rectilinear boundary, and works absolutely deterministic. The approach is innovatively different from conventional, top-down oriented floorplanning algorithms.
DMOS transistors in integrated smart power technologies are often subject to cyclic power dissipation with substantial selfheating. This leads to repetitive thermo mechanical stress, causing fatigue of the on-chip metallization and limiting the lifetime. Hence, most designs use large devices for lower peak temperatures and thus reduced stress to avoid premature failures.
However, significantly smaller DMOS transistors are acceptable if the system reverts to a safer operating condition with lower stress when a failure is expected to occur in the near future. Hence, suitable early-warning sensors are required. This paper proposes a floating metal meander embedded between DMOS source and drain to detect an impending metallization failure. Measurement results of several variants will be presented and discussed, investigating their suitability as early warning indicators.
This work presents a spiral antenna array, which can be used in the V- and W-Band. An array equipped with Dolph-Chebychev coefficients is investigated to address issues related to the low gain and side lobe level of the radiating structure. The challenges encountered in this achievement are to provide an antenna that is not only good matched but also presents an appreciable effective bandwidth at the frequency bands of interest. Its radiation properties including the effective bandwidth and the gain are analyzed for the W-Band.
A single-phase fixed-frequency operated power factor correction circuit with reduced switching losses is proposed. The circuit uses the combination of a boost converter with an added clamp-switch, a pulse wave shaping circuit, and a standard control IC to discharge the transistor's output capacitance prior to its turn-on. In this way, a very low-complexity control circuit implementation to reduce switching losses or even achieve complete zero-voltage switching without additional sensors is possible. Moreover, this operation method is achieved at a constant switching frequency, possibly simplifying the design of the EMI filter and the converter's inductor. Experimental test results for a 100 W prototype converter are presented to validate the feasibility of the proposed operating method and corresponding circuit structure.
In contrast to IC design, MEMS design still lacks sophisticated component libraries. Therefore, the physical design of MEMS sensors is mostly done by simply drawing polygons. Hence, the sensor structure is only given as plain graphic data which hinders the identification and investigation of topology elements such as spring, anchor, mass and electrodes. In order to solve this problem, we present a rule-based recognition algorithm which identifies the architecture and the topology elements of a MEMS sensor. In addition to graphic data, the algorithm makes use of only a few marking layers, as well as net and technology information. Our approach enables RC-extraction with commercial field solvers and a subsequent synthesis of the sensor circuit. The mapping of the extracted RC-values to the topology elements of the sensor enables a detailed analysis and optimization of actual MEMS sensors.
Modern power semiconductor devices have low capacitances and can therefore achieve very fast switching transients under hard-switching conditions. However, these transients are often limited by parasitic elements, especially by the source inductance and the parasitic capacitances of the power semiconductor. These limitations cannot be compensated by conventional gate drivers. To overcome this, a novel gate driver approach for power semiconductors was developed. It uses a transformer which accelerates the switching by transferring energy from the source path to the gate path.
Experimental results of the novel gate driver approach show a turn-on energy reduction of 78% (from 80 μJ down to 17 μJ) with a drain-source voltage of 500V and a drain current of 60 A. Furthermore, the efficiency improvement is demonstrated for a hard-switching boost converter. For a switching frequency of 750 kHz with an input voltage of 230V and an output voltage of 400V, it was possible to extend the output power range by 35%(from 2.3kW to 3.1 kW), due to the reduction of the turn-on losses, therefore lowering the junction temperature of the GaN-HEMT.
Many GaN power transistors contain a PN junction between gate and the channel region close to the source. In order to maintain the on-state, current must continuously be supplied to the junction. Therefore, the commonly recommended approach uses a gate bias voltage of 12V to compensate the Miller current through a boost circuit. For the same purpose, a novel gate driving method based on an inductive feed forward has been presented. With this, stable turn-on can be achieved even for a bias voltage of only 5V. The effectiveness of this concept is demonstrated by double pulse measurements, switching currents up to 27A and a voltage of 400V. For both approaches a compact design with low source inductance is characterized. In addition to the significant reduction of the gate bias voltage and peak gate current, the new approach reduces the switching losses for load currents >23 A.
A novel configuration of the dual active bridge (DAB) DC/DC converter is presented, enabling more efficient wide voltage range conversion at light loads. A third phase leg as well as a center tapped transformer are introduced to one side of the converter. This concept provides two different turn ratios, thus extending the zero voltage switching operation resulting in higher efficiency. A laboratory prototype was built converting an input voltage of 40V to an output voltage in the range of 350V to 650V. Measurements show a significant increase up to 20% in the efficiency for light-load operation.
A novel brushless excitation concept for synchronous machines with a rotating power converter is proposed in this paper. The concept does not need an auxiliary winding or any other modification to the machine structure apart from an inverter with a DC link capacitor and a controller on the rotor. The power required for the rotor excitation is provided by injecting harmonics into the stator winding. Thus, a voltage in the field coil is induced. The rotor inverter is controlled such that the alternating current charges the DC link capacitor. At the same time the inverter supplies the DC field current to the field coil. The excitation concept is first developed in theory, then presented using an analytical model and FEA, and lastly investigated with a prelimininary experimental setup.
This paper introduces a novel placement methodology for a common-centroid (CC) pattern generator. It can be applied to various integrated circuit (IC) elements, such as transistors, capacitors, diodes, and resistors. The proposed method consists of a constructive algorithm which generates an initial, close to the optimum, solution, and an iterative algorithm which is used subsequently, if the output of constructive algorithm does not satisfy the desired criteria. The outcome of this work is an automatic CC placement algorithm for IC element arrays. Additionally, the paper presents a method for the CC arrangement evaluation. It allows for evaluating the quality of an array, and a comparison of different placement methods.
A new method for the analysis of movement dependent parasitics in full custom designed MEMS sensors
(2017)
Due to the lack of sophisticated microelectromechanical systems (MEMS) component libraries, highly optimized MEMS sensors are currently designed using a polygon driven design flow. The strength of this design flow is the accurate mechanical simulation of the polygons by finite element (FE) modal analysis. The result of the FE-modal analysis is included in the system model together with the data of the (mechanical) static electrostatic analysis. However, the system model lacks the dynamic parasitic electrostatic effects, arising from the electric coupling between the wiring and the moving structures. In order to include these effects in the system model, we present a method which enables the quasi dynamic parasitic extraction with respect to in-plane movements of the sensor structures. The method is embedded in the polygon driven MEMS design flow using standard EDA tools. In order to take the influences of the fabrication process into account, such as etching process variations, the method combines the FE-modal analysis and the fabrication process simulation data. This enables the analysis of dynamic changing electrostatic parasitic effects with respect to movements of the mechanical structures. Additionally, the result can be included into the system model allowing the simulation of positive feedback of the electrostatic parasitic effects to the mechanical structures.
This paper presents a new broadband antenna for satellite communications. It describes the procedure involved in the design of a microstrip antenna array and its multi-level passive feed network that together yield circular polarization and the necessary gain to be used in an earth-satellite link. The designed antenna is notable for its large bandwidth, circular polarization, high gain and small dimensions.
This paper presents an approach for the implementation of a modular and scalable power electronics device for controlling electric drives in the field of electric vehicles using wide bandgap semiconductor devices. The main idea is to achieve the required output currents or voltages by connecting adequately designed hardware modules in parallel or in series. This particular design is based on the fact that the single modules generate a continuous and specified output voltage from a given dc voltage, e.g. an intermediate circuit or battery voltage. The main benefit is, that different current or voltage requirements can be satisfied based on a single module thus decreasing development and production costs. The current paper focuses on the connection in parallel of such modules. A control architecture is illustrated and a first proof of concept is given.
Model-guided Therapy and Surgical Workflow Systems are two interrelated research fields, which have been developed separately in the last years. To make full use of both technologies, it is necessary to integrate them and connect them to Hospital Information Systems. We propose a framework for integration of Model-guided Therapy in Hospital Information Systems based on the Electronic Medical Record, and a taskbased Workflow Management System, which is suitable for clinical end users. Two prototypes - one based on Business Process Modeling Language, one based on the serum-board - are presented. From the experience with these prototypes, we developed a novel personalized visualization system for Surgical Workflows and Model-guided Therapy. Key challenges for further development are automated situation detection and a common communication infrastructure.
The high system flexibility necessary for the full automation of complex and unstructured tasks leads to increased complexity, thus higher costs. On the other hand, the effectiveness and performance of such systems decrease, explaining the unfulfilled potential of robotcs in sectors such as intralogistics, where the benefits of a robotic solution rarely justify its costs. Taking the distance from the false idea that a task should be either fully automated, or fully manual, this aper presents a method for design of a lean human-robot interaction (HRI) withe the objective of the "right level of automation", where functions are divided among human and automated agends, so that the overall process gains in performances and/or costs. ... The 10 progressive steps of the method are presented and discussed with reference to their graphical tool: the House of Quality Interaction.
A TLP system with a very low characteristic impedance of 1.5 Ω and a selectable pulse length from 0.5 to 6 μs is presented. It covers the entire operation region of many power semiconductors up to 700 V and 400 A. Ist applicability is demonstrated by determining the Output characteristics for two Cool MOS devices up to destruction.
This paper presents a compact 3 kW bidirectional GaN-HEMT DC/DC converter for 360V to 400-500 V. A very high efficiency has been reached by applying a zero voltage turn-on in conjunction with a negative gate-source voltage, even though normally-off HEMTs are used. Further improvements were achieved by adapting the switching frequency to the load current and output voltage, as will be explained by means of the loss contribution of the specific elements for a constant and an adaptive switching frequency. Measurements have shown a high converter efficiency exceeding 99% over a wide output power range of up to 3 kW.
Rapidly growing population and increasing amount of shipments induced by the e-commerce are two of the main reasons for the constantly rising urban freight traffic. Cities are therefore overwhelmed by a growing stream of goods and the available infrastructure, shared between people and goods traffic, often reached its maximum capacity. Phenomena such as traffic congestion, pollution and lack of space are direct consequences of this trend and their impact on the quality of life in the city is not negligible. City administrations are keen to evaluate innovative city logistics concepts and adopt alternative solutions, to overcome the challenges posed by such a dynamic environment, constrained in existing infrastructure. In this paper, a heuristic method based on the utility analysis is presented. Thanks to a modular approach accounting for stakeholders´ requirements, possible different scenarios and available technologies, the development of new city logistic concepts is supported. The proposed method is then applied to a case study concerning the city of Reutlingen (Germany). Results are presented and a brief discussion leads to the conclusion.
We present a new methodology for automatic selection and sizing of analog circuits demonstrated on the OTA circuit class. The methodology consists of two steps: a generic topology selection method supported by a “part-sizing” process and subsequent final sizing. The circuit topologies provided by a reuse library are classified in a topology tree. The appropriate topology is selected by traversing the topology tree starting at the root node. The decision at each node is gained from the result of the part-sizing, which is in fact a node-specific set of simulations. The final sizing is a simulation-based optimization. We significantly reduce the overall simulation effort compared to a classical simulation-based optimization by combining the topology selection with the part-sizing process in the selection loop. The result is an interactive user friendly system, which eases the analog designer’s work significantly when compared to typical industrial practice in analog circuit design. The topology selection method and sizing process are implemented as a tool into a typical analog design environment. The design productivity improvement achievable by our method is shown by a comparison to other design automation approaches.