Refine
Document Type
- Journal article (117) (remove)
Language
- English (117) (remove)
Has full text
- no (117) (remove)
Is part of the Bibliography
- yes (117)
Institute
- Life Sciences (46)
- ESB Business School (37)
- Texoversum (15)
- Informatik (10)
- Technik (9)
Publisher
- Elsevier (44)
- LIT (6)
- DUZ Medienhaus (5)
- IOP (5)
- Royal Society of Chemistry (5)
- The Royal Society of Chemistry (3)
- dfv media group (3)
- ASME (2)
- Common Ground Publishing (2)
- De Gruyter (2)
Woven piezoelectric sensors as part of the textile reinforcement of fiber reinforced plastics
(2019)
Sensor integration in fiber reinforced plastic (FRP) structures enables online process and structural health monitoring (SHM). This paper describes the development and application of woven fabric-based piezoelectric impact and bending sensors for integration into FRP. The work focuses on design and characterization of woven piezoelectric sensors, especially as a part of the reinforcement structure. The reinforcement of the component acts as a sensor in itself and therefore no additional external objects in the form of sensor components or sensor fibers, which could create unwanted weak points within the FRP, are added. The bending test results reveal a direct relationship between the applied load and the sensor signal. Furthermore, the appropriate sensor position in the component cross section was determined and the influence of thermal polarization on the sensor properties was investigated.
In breath analysis, ambient air contaminations are ubiquitous and difficult to eliminate. This study was designed to investigate the reduction of ambient air background by a lung wash-out with synthetic air. The reduction of the initial ambient air volatile organic compound (VOC) intensity was investigated in the breath of 20 volunteers inhaling synthetic air via a sealed full face mask in comparison to inhaling ambient air. Over a period of 30 minutes, breath analysis was conducted using ion mobility spectrometry coupled to a multi-capillary column. A total of 68 VOCs were identified for inhaling ambient air or inhaling synthetic air. By treatment with synthetic air, 39 VOCs decreased in intensity, whereas 29 increased in comparison to inhaling ambient air. In total, seven VOCs were significantly reduced (P-value < 0.05). A complete wash-out of VOCs in this setting was not observed, whereby a statistically significant reduction up to 65% as for terpinolene was achieved. Our setting successfully demonstrated a reduction of ambient air contaminations from the airways by a lung wash-out with synthetic air.
In addition to increased safety by detecting possible overload, continuous component monitoring by sensor integration makes the use of fiber reinforced plastics more cost-effective. Since the components are continuously monitored, one can switch from time-based to condition-based maintenance. However, the integration of conventional sensor components causes weak points, as foreign objects are inserted into the reinforcing structure. In this paper, we examine the use of the textile reinforcement as a sensor in itself. We describe how bending sensors can be formed by slightly modifying in the composite’s reinforcement structure. We investigated two different sensor principles. (1) The integration of textile plate capacitors into the structure; (2) The construction of textile piezo elements as part of the reinforcing structure. The bending test results reveal that textile plate capacitors show a load-dependent signal output. The samples with textile piezo elements show a significant increase in signal strength.
Context: Organizations increasingly develop software in a distributed manner. The cloud provides an environment to create and maintain software-based products and services. Currently, it is unknown which software processes are suited for cloud-based development and what their effects in specific contexts are.
Objective: We aim at better understanding the software process applied to distributed software development using the cloud as development environment. We further aim at providing an instrument which helps project managers comparing different solution approaches and to adapt team processes to improve future project activities and outcomes.
Method: We provide a simulation model which helps analyzing different project parameters and their impact on projects performed in the cloud. To evaluate the simulation model, we conduct different analyses using a Scrumban process and data from a project executed in Finland and Spain. An extra adaptation of the simulation model for Scrum and Kanban was used to evaluate the suitability of the simulation model to cover further process models.
Results: A comparison of the real project data with the results obtaind from the different simulation runs shows the simulation producing results close to the real data, and we could successfully replicate a distributed software project. Furthermore, we could show that the simulation model is suitable to address further process models.
Conclusion: The simulator helps reproducing activities, developers, and events in the project, and it helps analyzing potential tradeoffs, e.g., regarding throughput, total time, project size, team size and work-in-progress limits. Furthermore, the simulation model supports project managers selecting the most suitable planning alternative thus supporting decision-making processes.
Unprecedented formation of sterically stabilized phospholipid liposomes of cuboidal morphology
(2021)
Sterically stabilized phospholipid liposomes of unprecedented cuboid morphology are formed upon introduction in the bilayer membrane of original polymers, based on polyglycidol bearing a lipid-mimetic residue. Strong hydrogen bonding in the polyglycidol sublayers creates attractive forces, which, facilitated by fluidization of the membrane, bring about the flattening of the bilayers and the formation of cuboid vesicles.
In countries such as Germany, where municipalities have planning sovereignty, problems of urban sprawl often arise. As the dynamics of land development have not substantially subsided over the last years, the national government decided to test the instrument of ‘Tradable Planning Permits’ (TPP) in a nationwide field experiment with 87 municipalities involved. The field experiment was able to implement the key features of a TPP system in a laboratory setting with approximated real socioeconomic and planning conditions. In a TPP system allocated planning permits must be used by municipalities for developing land. The permits can be traded between local jurisdictions, so that they have flexibility in deciding how to comply with the regulation. In order to evaluate the performance of such a system, specific field data about future building areas and their impact on community budgets for the period 2014–2028 were collected. The field experiment contains several sessions with representatives of the municipalities and with students. The participants were confronted with two (municipalities) and four (students) schemes. The results show that a trading system can curb down land development in an effective and also efficient manner. However, depending on the regulatory framework, the trading schemes show different price developments and distributional effects. The unexperienced representatives of the local authorities can easily handle with the permits in the administration and in the established market. A trading scheme sets very high incentives to save open space and to direct development activities to areas within existing planning boundaries. It is therefore a promising instrument for Germany and also other regions or countries with an established land-use planning system.
We investigate the toxicity of different types and sizes of microplastic particles (0.3–4 mm) under different conditions (new particles, aged particles with biofilm, and particles with adsorbed Tributyltin) on the freshwater amphipod Gammarus fossarum in 3-week exposures. All types of plastic particles, which were randomly taken up to a small extent, were mostly Polyphenylenoxide, Polybutylentherephthalate and Polypropylene, with particles < 1 mm in size. Plastic particles did not affect the feeding and locomotory behaviour of gammarids, and there was no strong difference between pristine plastic particles and aged particles with biofilm. Mortality tended to be higher compared with the control. Tributyltinhydride (TBTH) adsorbed to microplastic particles had no effect on uptake, survival, feeding and locomotory behaviour during the 3 weeks of exposure. Dissolved TBTH, however, was already very toxic after few days of exposure (LC50-96h < 1 ng l–1).
Mature economies which are driven mainly by small and medium sized enterprises (SMEs) are increasingly becoming dependent on material imports. Global material consumption is ever increasing, mainly driven by population increases. Decoupling of material consumption from economic growth is one of the greatest challenges of the 21st century. Within this paper available methods for the assessment of material efficiency on different economic scales are investigated and those detected that are particulary suitable for the use in SMEs. Recommendations for further improvements of the selected tools and an outlook concerning planned research activities in the field of material efficiency in enterprises, supply chains and circular economy aspects are given.
We investigated the state of artificial intelligence (AI) in pharmaceutical research and development (R&D) and outline here a risk and reward perspective regarding digital R&D. Given the novelty of the research area, a combined qualitative and quantitative research method was chosen, including the analysis of annual company reports, investor relations information, patent applications, and scientific publications of 21 pharmaceutical companies for the years 2014 to 2019. As a result, we can confirm that the industry is in an ‘early mature’ phase of using AI in R&D. Furthermore, we can demonstrate that, despite the efforts that need to be managed, recent developments in the industry indicate that it is worthwhile to invest to become a ‘digital pharma player’.
This article explores current debate on the use of soft power in international higher education, highlighting existing tensions between competing political and academic discourses. It draws on examples from practice and relevant insights in soft power scholarship to capture varying paradoxes and dilemmas that emerge as nations try to leverage the power of international tertiary education to enhance their brand and attract foreign audiences in the name of public diplomacy. Whilst exposing cases of hubris and hidden agendas, this study also addresses issues of inequality and responds to a growing call for knowledge diplomacy aimed at tackling common global problems.
Artificial intelligence (AI) technologies, such as machine learning or deep learning, have been predicted to highly impact future organizations and radically change the way how projects are managed. The Project Management Institute (PMI), the network of around 1.1 million certified project managers, ranked AI as one of the top three disruptors of their profession. In an own study on the effect of AI, 37% of the project management processes can be executed by machine learning and other AI technologies. In addition, Gartner recently postulated that 80% of the work of today's project managers may be eliminated by AI in 2030.
This editorial aims to outline today's project and portfolio management in context of pharmaceutical research and development (R&D), followed by an AI-vision and a more tangible mission, and illustrate what the consequences of an AI-enabled project and portfolio management could be for pharmaceutical R&D.
The fashion industry is well documented for causing significant environmental impact. Product-service systems (PSS) present a promising way to solve this challenge. PSS shift the focus toward complementary service offers, which decouples customer satisfaction from material consumption and entails dematerialization. However, PSS are not ecoefficient by nature but need to be accompanied by corporate environmental management (CEM) practices. The objective of this article is to examine the potential of PSS to contribute to the environmental sustainability of today's fashion industry by investigating if fashion firms with a positive attitude toward PSS implementation also pursue goals related to the ecological environment. For this purpose, analysis of variance (ANOVA) is conducted to analyze data of 102 fashion firms. Results reveal that the diffusion of PSS in today's fashion industry is low and few firms consider implementing PSS. Results, furthermore, demonstrate that PSS implementation is positively related to CEM. This indicates that existing structures of CEM favor PSS implementation and unlock the eco-efficient potential of implemented PSS in the fashion industry.
Pharmaceutical companies are among the top investors into research and development (R&D) globally, as product innovation is still the main growth driver for the industry and because the related complexities necessitate enormous R&D investments. The market demand for new medicines to be more efficacious or to provide better safety than existing drugs and the regulatory need to prove superiority in clinical trials are reasons why drug R&D is increasingly expensive and pharmaceutical companies need to manage extraordinarily high costs per approved new compound.
Entrepreneurship education is becoming increasingly important in higher education and also drives the development of innovative teaching formats, which can increase student engagement. It does, however, need greater international focus to become more attractive for both domestic and international students. This paper presents the examination and course design of two case studies, which promote entrepreneurship education for domestic and international students. These examples show that entrepreneurship courses are attractive due to their focus on interdisciplinarity, experience-based learning, and project-based work. Following a design-based research approach, this paper provides a practical contribution by offering a detailed overview of course design principles, classroom practice and presents reflections and learnings from an iterative development process.
Context
In a world of high dynamics and uncertainties, it is almost impossible to have a long-term prediction of which products, services, or features will satisfy the needs of the customer. To counter this situation, the conduction of Continuous Improvement or Design Thinking for product discovery are common approaches. A major constraint in conducting product discovery activities is the high effort to discover and validate features and requirements. In addition, companies struggle to integrate product discovery activities into their agile processes and iterations.
Objective
This paper aims at suggests a supportive tool, the “Discovery Effort Worthiness (DEW) Index”, for product owners and agile teams to determine a suitable amount of effort that should be spent on Design Thinking activities. To operationalize DEW, proposals for practitioners are presented that can be used to integrate product discovery into product development and delivery.
Method
A case study was conducted for the development of the DEW index. In addition, we conducted an expert workshop to develop proposals for the integration of product discovery activities into the product development and delivery process.
Results
First, we present the "Discovery Effort Worthiness Index" in form of a formula. Second, we identified requirements that must be fulfilled for systematic integration of product discovery activities into product development and delivery. Third, we derived from the requirements proposals for the integration of product discovery activities with a company's product development and delivery.
Conclusion
The developed "Discovery Effort Worthiness Index" provides a tool for companies and their product owners to determine how much effort they should spend on Design Thinking methods to discover and validate requirements. Integrating product discovery with product development and delivery should ensure that the results of product discovery are incorporated into product development. This aims to systematically analyze product risks to increase the chance of product success.
Customer foresight is a relatively new research field. We introduce the customer foresight territory by discussing it localization between customer research and foresight research. For this purposse, we look at a variety of methods that help to understand customers and future realities. On this basis we provide an overwiew of customer foresight methods and outline an ideal-typical research journey.
The Commitment of Traders report (CoT) has been around for over 30 years, consistently revealing the futures positions of key market players. This study's primary aim is to use the comprehensive data from the Commitment of Traders reports to develop a short-term reversal trading strategy. Against the benchmark, a S&P 500 buy-and-hold approach with a Sharpe ratio of 1.07, the CoT long only strategy generated significant results in six individual markets. Extending the strategy to long-and-short, two markets outperformed the benchmark significantly. However, a scenario analysis indicated underperformance of the CoT strategy when traded in a portfolio, confirming that the chosen strategy parameters could not generate excess Sharpe ratios. Our results indicate that the Commodity Futures Trading Commission, more specifically the CoT report, contributed to efficient derivatives market.
Computers are increasingly used in teams in various contexts, for example in negotiations. Especially when using computer-support for decision making processes, it is an important question whether active collaboration within the team - for example via audio-conference - has additional benefits beyond the supply of full task-relevant information via computer. In team negotiations, team representatives are only able to represent the whole team, if diverse preferences of the team members are aligned prior to the negotiation. In an experimental study with 150 participants, we provided team members with the complete information about each other's preferences during an either collaboratively (computer-mediated) or seperately conducted computer-supported negotiation preparation and subsequently asked them for their priorities as representatives of the team. Our results showed that providing complete task-relevant information via computer is insufficient to compensate for the absence of active collaboration within the team.
Polycaprolactone (PCL) was electrospun with the addition of arginine (Arg), an α-amino acid that accelerates the haeling process. The efficient needleless electrospinning technique was used for the fabrication of the nanofibrous layers. The materials produced consisted mainly of fibers with diameters of between 200 and 400 nm. Moreover, both microfibers and beads were present within the layers. Higher bead sized were observed with the increased addition of arginine.
Today, virtualizing pharma R&D is increasingly related with data analytics and artificial intelligence (AI), technologies that have been developed by software companies outside the healthcare sector. The process of virtualizing pharma R&D is closely related to the technological advancements that result in the generation of large data sets ranging from genomics, proteomics, metabolomics, medical imaging, IoT wearables and large clinical trials, making it necessary for pharma companies to find new ways to store and ultimately analyze information. As a consequence, pharma companies are experimenting with AI in R&D ranging from in-silico drug design to clinical trail participants identification or dosage error reduction.
We report the temperature dependence of metal-enhanced fluorescence (MEF) of individual photosystem I (PSI) complexes from Thermosynechococcus elongatus (T. elongatus) coupled to gold nanoparticles (AuNPs). A strong temperature dependence of shape and intensity of the emission spectra is observed when PSI is coupled to AuNPs. For each temperature, the enhancement factor (EF) is calculated by comparing the intensity of individual AuNP-coupled PSI to the mean intensity of ‘uncoupled’ PSI. At cryogenic temperature (1.6 K) the average EF was 4.3-fold. Upon increasing the temperature to 250 K the EF increases to 84-fold. Single complexes show even higher EFs up to 441.0-fold. At increasing temperatures the different spectral pools of PSI from T. elongatus become distinguishable. These pools are affected differently by the plasmonic interactions and show different enhancements. The remarkable increase of the EFs is explained by a rate model including the temperature dependence of the fluorescence yield of PSI and the spectral overlap between absorption and emission spectra of AuNPs and PSI, respectively.
The development and preservation of children’s innate creativity as they enter their professional career has grown in importance due to fundamental changes in today’s economy and society. It is therefore key to understand how teaching strategies can contribute to educational change in the early stages of schooling. Design teaching encompasses a variety of skills that can help schools shift their focus to foster children’s natural ability to “ask why” in their search for learning how to think and create. This article presents the results of an interdisciplinary workshop involving university students aiming to develop new educational approaches to foster children’s creativity through design to be implemented in the elementary school curriculum of the German federal state Baden-Württemberg. To support the workshop participants in providing a holistic concept within a compressed time period, a sustainability framework was included to further articulate their brief. The teams who were composed of chemists, computer scientists, designers, and engineers, followed the Design Thinking process to develop their proposals. A kick-off meeting presenting results of an international qualitative survey with elementary school teachers, as well as expert input during the workshop addressing the relevant topics, provided teams with key information to define their design directions. Concepts designed by each team exhibited a comprehensive solution resulting in both the abstract “education idea” and physical embodiments of the tools. Their outputs included products, interior concepts to be implemented in classrooms, exercises as well as games to support the newly developed educational models. The benefits and limitations of these concepts along with key observations of participants’ interdisciplinary collaboration are presented and discussed herein. Future work will investigate the Design knowledge of German elementary school teachers more in depth and will involve testing the new concepts in German elementary school environments.
The surface properties of human meibomian lipids (MGS), the major constituent of the tear film (TF) lipid layer, are of key importance for TF stability. The dynamic interfacial properties of films by MGS from normal eyes (nMGS) and eyes with meibomian gland dysfunction (dMGS) were studied using a Langmuir surface balance. The behavior of the samples during dynamic area changes was evaluated by surface pressure–area isotherms and isocycles. The surface dilatational rheology of the films was examined in the frequency range 10−5 to 1 Hz by the stress-relaxation method. A significant difference was found, with dMGS showing slow viscosity-dominated relaxation at 10−4 to 10−3 Hz, whereas nMGS remained predominantly elastic over the whole range. A Cole–Cole plot revealed two characteristic processes contributing to the relaxation, fast (on the scale of characteristic time τ < 5 s) and slow (τ > 100 s), the latter prevailing in dMGS films. Brewster angle microscopy revealed better spreading of nMGS at the air–water interface, whereas dMGS layers were non-uniform and patchy. The distinctions in the interfacial properties of the films in vitro correlated with the accelerated degradation of meibum layer pattern at the air–tear interface and with the decreased stability of TF in vivo. These results, and also recent findings on the modest capability of meibum to suppress the evaporation of the aqueous subphase, suggest the need for a re-evaluation of the role of MGS. The probable key function of meibomian lipids might be to form viscoelastic films capable of opposing dilation of the air–tear interface. The impact of temperature on the meibum surface properties is discussed in terms of its possible effect on the normal structure of the film.
Stronger than they look
(2019)
We analyze economics PhDs’ collaborations in peer-reviewed journals from 1990 to 2014 and investigate such collaborations’ quality in relation to each co-author’s research quality, field and specialization. We find that a greater overlap between co-authors’ previous research fields is significantly related to a greater publication success of co-authors’ joint work and this is robust to alternative specifications. Co-authors that engage in a distant collaboration are significantly more likely to have a large research overlap, but this significance is lost when co-authors’ social networks are accounted for. High quality collaboration is more likely to emerge as a result of an interaction between specialists and generalists with overlapping fields of expertise. Regarding interactions across subfields of economics (interdisciplinarity), it is more likely conducted by co- authors who already have interdisciplinary portfolios, than by co-authors who are specialized or starred in different subfields.
The transmembrane Ca2+ − activated Cl− channel - human bestrophin-1 (hBest1) is expressed in retinal pigment epithelium and mutations of BEST1 gene cause ocular degenerative diseases colectivelly referred to as “bestrophinopathies”. A large number of genetical, biochemical, biophysical and molecular biological studies have been performed to understand the relationship between structure and function of the hBest1 protein and its pathophysiological significance. Here, we review the current understanding of hBest1 surface organization, interactions with membrane lipids in model membranes, and its association with microdomains of cellular membranes. These highlights are significant for modulation of channel activity in cells.
The fluorescence of monomeric photosystem II core complexes (mPSIIcc) of the cyanobacterium Thermosynechococcus elongatus, originating from redissolved crystals, is investigated by using single-molecule spectroscopy (SMS) at 1.6 K. The emission spectra of individual mPSIIcc are dominated by sharp zero-phonon lines, showing the existence of different emitters compatible with the F685, F689, and F695 bands reported formerly. The intensity of F695 is reduced in single mPSIIcc as compared to single PSIIcc-dimers (dPSIIcc). Crystal structures show that one of the β-carotene (β-Car) cofactors located at the monomer–monomer interface in dPSIIcc is missing in mPSIIcc. This β-Car in dPSIIcc is in van der Waals distance to chlorophyll (Chl) 17 in the CP47 subunit. We suggest that this Chl contributes to the F695 emitter. A loss of β-Car cofactors in mPSIIcc preparations will lead to an increased lifetime of the triplet state of Chl 17, which can explain the reduced singlet emission of F695 as observed in SMS.
As businesses grow and diversify, they almost inevitably make their range of offerings more complex. Complexity brings costs - but smart use of today’s digital technologies can help companies finesse the trade-offs between complexity´s costs and benefits. Imagine a retailer that has 10 million products and hundreds of variations for each product yet keeps it simple for customers to make a choice. Impossible? Not today. Amazon.com Inc. creates value from its product complexity with simple customer-facing processes, such as search, ratings, reviews and suggestions. Now imagine a diversified high-tech company with locally differentiated products in 60 categories in more than 100 different countries. A mess of internal processes and systems? Not necessarily. Royal Philips creates value by providing locally relevant products to different markets, while keeping the vast majority of its processes standardized on digitized platforms. Until now, managing business complexity has usually involved a trade-off. This trade-off forced companies to compromise between creating value from complexity and benefiting from the efficiencies of simplicity. As businesses entered new geographies, developed new products, opened new channels and added more granular customer segments, they made their offerings more complex with the intention of adding value. But, as an almost inevitable consequence, companies also made it more difficult for customers to interact with the company and more unwieldy for employees to get things done. However, with today´s increased digitization, companies can finesse this trade-off; they can increase valueadding complexity in their product offerings while keeping processes for customers and employees simple. Our research suggests that companies operating in this "complexity sweet spot" outperform their competitors on profitability. In this article, we explain how companies achieve this breakthrough in the digital world.
Ion Mobility Spectrometry (IMS) is a widely used and ‘well-known’ technique of ion separation in the gaseous phase based on the differences of ion mobilities under an electric field. This technique has received increased interest over the last several decades as evidenced by the pace and advances of new IMS devices available. In this review we explore the hyphenated techniques that are used with IMS, specifically mass spectrometry as an identification approach and a multi-capillary column as a pre-separation approach. Also, we will pay special attention to the key figures of merit of the ion mobility spectrum and how data sets are treated, and the influences of the experimental parameters on both conventional drift time IMS (DTIMS) and miniaturized IMS also known as high Field Asymmetric IMS (FAIMS) in the planar configuration. The present review article is preceded by a companion review article which details the current instrumentation and contains the sections that configure both conventional DTIMS and FAIMS devices. These reviews will give the reader an insightful view of the main characteristics and aspects of the IMS technique.
Ion Mobility Spectrometry (IMS) is a widely used and `well-known’ technique of ion separation in the gaseous phase based on the differences in ion mobilities under an electric field. All IMS instruments operate with an electric field that provides space separation, but some IMS instruments also operate with a drift gas flow that provides also a temporal separation. In this review we will summarize the current IMS instrumentation. IMS techniques have received an increased interest as new instrumentation and have become available to be coupled with mass spectrometry (MS). For each of the eight types of IMS instruments reviewed it is mentioned whether they can be hyphenated with MS and whether they are commercially available. Finally, out of the described devices, the six most-consolidated ones are compared. The current review article is followed by a companion review article which details the IMS hyphenated techniques (mainly gas chromatography and mass spectrometry) and the factors that make the data from an IMS device change as a function of device parameters and sampling conditions. These reviews will provide the reader with an insightful view of the main characteristics and aspects of the IMS technique.
On-chip metallization, especially in modern integrated BCD technologies, is often subject to high current densities and pronounced temperature cycles due to heat dissipation from power switches like LDMOS transistors. This paper continues the work on a sensor concept where small sense lines are embedded in the metallization layers above the active area of a switching LDMOS transistor. The sensors show a significant resistance change that correlates with the number of power cycles. Furthermore, influences of sense line layer, geometry and the dissipated energy are shown. In this paper, the focus lies on a more detailed analysis of the observed change in sense line resistance.
Herein the optimization of the physicochemical properties and surface biocompatibility of polyelectrolyte multilayers of the natural, biocompatible and biodegradable, linear polysaccharides hyaluronan and chitosan by Hofmeister anions was systematically investigated. We demonstrated that there is an interconnection between the bulk and surface properties of HA/Chi multilayers both varying in accordance with the arrangement of the anions in the Hofmeister series. Kosmotropic anions increased the hydration, thickness, micro- and macro-roughness, and hydrophilicity and improved the biocompatibility of the films by reduction (2 orders of magnitude) of the films stiffness and complete anti-thrombogenicity.
In 2015, the United Nations adopted the Sustainable Development Goals (SDGs), a collection of 17 global objectives to promote economic, social and ecological development in all parts of the world. While the academic discussion on the contribution of companies to the Sustainable Development Goals has recently gained momentum, the role of business-to-business (B2B) partnerships in reaching the SDGs is underexplored, particularly when it comes to North-South relationships. With our research, we aim to fill this gap in the literature by investigating sales partnerships between German manufacturers and their distributors in African markets. Based on a qualitative analysis of 28 interviews with managers of German and African companies, we show that long-term partnerships and job creation, technology transfer, training as well as high standards are significant contributions of companies to achieve the SDGs. While several SDGs such as goals 4,6,13,16 and 17 are addressed by B2B partnership, we also discuss approaches on how the firms’ engagement could be further leveraged and expanded.
Employing diffuse reflection ultraviolet visible (UV–Vis) spectroscopy we developed an approach that is capable to quantitatively determine flux residues on a technical copper surface. The technical copper surface was soldered with a no-clean flux system of organic acids. By a post-solder cleaning step with different cleaning parameters, various levels of residues were produced. The surface was quantitatively and qualitatively characterized using X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), Fourier transform infrared spectroscopy (FTIR) and diffuse reflection UV–Vis spectroscopy. With the use of a multivariate analysis (MVA) we examined the UV–Vis data to create a correlation to the carbon content on the surface. The UV–Vis data could be discriminated for all groups by their level of organic residues. Combined with XPS the data were evaluated by a partial least squares (PLS) regression to establish a model. Based on this predictive model, the carbon content was calculated with an absolute error of 2.7 at.%. Due to the high correlation of predictive model, the easy-to-use measurement and the evaluation by multivariate analysis the developed method seems suitable for an online monitoring system. With this system, flux residues can be detected in a manufacturing cleaning process of technical surfaces after soldering.
The properties of polyelectrolyte multilayers are ruled by the process parameters employed during self-assembly. This is the first study in which a design of experiment approach was used to validate and control the production of ultrathin polyelectrolyte multilayer coatings by identifying the ranges of critical process parameters (polyelectrolyte concentration, ionic strength and pH) within which coatings with reproducible properties (thickness, refractive index and hydrophilicity) are created. Mathematical models describing the combined impact of key process parameters on coatings properties were developed demonstrating that only ionic strength and pH affect the coatings thickness, but not polyelectrolyte concentration. While the electrolyte concentration had a linear effect, the pH contribution was described by a quadratic polynomial. A significant contribution of this study is the development of a new approach to estimate the thickness of polyelectrolyte multilayer nanofilms by quantitative rhodamine B staining, which might be useful in all cases when ellipsometry is not feasible due to the shape complexity or small size of the coated substrate. The novel approach proposed here overcomes the limitations of known methods as it offers a low spatial sampling size and the ability to analyse a wide area without restrictions on the chemical composition and shape of the substrate.
Given the increasing internationalisation of higher education, universities compete more and more not only for national but even more for international students. Selecting the best candidates from the pool of international applicants is a challenge. In our study, we analysed which criteria are best to predict the academic performance of students coming from different countries with different education systems, using different grade point average (GPA) standards. Using an administrative data set from an International Business programme at a German university of applied sciences, we explored the predictive power of adjusted high school GPA, IQ test result, interview score and first year grades in English, maths, and statistics.
Predictive maintenance information systems: the underlying conditions and technological aspects
(2020)
Predictive maintenance has the potential to improve the reliability of production and service provisioning. However, there is little knowledge about the proper implementation of predictive maintenance in research and practice. Therefore, we conducted a multi-case study and investigated underlying conditions and technological aspects for implementing a predictive maintenance system and where it leads to. We found that predictive maintenance initiatives are triggered by severe impacts of failures on revenue and profit. Furthermore, successful predictive maintenance initiatives require that pre-conditions are fulfilled: Data must be available and accessible. Very important is also the support by the management. We identified four factors important for the implementation of predictive maintenance. The integration of data is highly facilitated by Cloud-based mechanisms. The detection of events is enabled by advanced analytics. The execution of predictive maintenance operations is supported by data-driven process automation and visualization.
The general conclusion of climate change studies is the necessity of eliminating net CO2 emissions in general and from the electric power systems in particular by 2050. The share of renewable energy is increasing worldwide, but due to the intermittent nature of wind and solar power, a lack of system flexibility is already hampering the further integration of renewable energy in some countries. In this study, we analyze if and how combinations of carbon pricing and power-to-gas (PtG) generation in the form of green power-to-hydrogen followed by methanation (which we refer to as PtG throughout) using captured CO2 emissions can provide transitions to deep decarbonization of energy systems. To this end, we focus on the economics of deep decarbonization of the European electricity system with the help of an energy system model. In different scenario analyses, we find that a CO2 price of 160 €/t (by 2050) is on its own not sufficient to decarbonize the electricity sector, but that a CO2 price path of 125 (by 2040) up to 160 €/t (by 2050), combined with PtG technologies, can lead to an economically feasible decarbonization of the European electricity system by 2050. These results are robust to higher than anticipated PtG costs.
Despite the significant potential offered by the powder coating process for finishing wood-based materials, until now it has been used almost exclusively for coating Medium Density Fiber Board (MDF). A research project aims to develop processes and substrate materials that will allow lightweight boards to be powder coated.
The level of automation in intralogistics has steadily increased over recent years. For small and medium-sized enterprises (SMEs), however, the associated digital change is a major challenge. Since most SMEs are facing increasing sales volumes (e.g. due to e-commerce and good overall economy) in combination with decreasing lot sizes due to the market demand for individualized products, SMEs have to find innovative solutions to cope with these challenges in production as well as in logistics. Innovative technologies, like 3D printing technologies for the production for small lot sizes and future-oriented intralogistics technologies can serve as enablers in logistics to realize flexible logistic processes for increasing market requiremments. Considering that, this paper examines innovative and future-oriented technologies for intralogistics such as smart containers, driverless forklift systems, data glasses, smart shelves and smart pallets regarding their potential for SMEs. This explorative research paper shows that digital technologies are already suitable and available for SMEs.However, challenges are still seen in areas like the identification and digitalization potential and the financing of these new projects. The primary reason escpecially for SMEs for this is that they have to make investments based on an economically feasible payback period and less based on prestigious reasons like digitalization flagship projecs done by large corporations. In addition, the identification of feasible starting points for digitalization within intralogistic systems embedded in specific factory processes is a major challenge not only for SMEs.
We presented our robot framework and our efforts to make face analysis more robust towards self-occlusion caused by head pose. By using a lightweight linear fitting algorithm, we are able to obtain 3D models of human faces in real-time. The combination of adaptive tracking and 3D face modelling for the analysis of human faces is used as a basis for further research on human-machine interaction on our SCITOS robot platform.
Participation in fast fashion brands’ clothes recycling plans in an omnichannel retail environment
(2020)
The rise of the fast fashion industry allows more and more people to participate in fashion consumption, but goes along with negative consequences on the environment. To reduce wastage, fast fashion retailers have begun to offer used clothes recycling plans to which customers can submit clothes they no longer wear. Since these recycling plans have mainly been operated in offline stores so far, the rise of omnichannel retailing poses new challenges on retailers with regard to organizing the plan and motivating consumers to participate. On a sample of N=370 Chinese fast fashion consumers, this paper investigates, which factors determine consumers’ willingness to participate in fast fashion brands’ used clothes recycling plans in an omnichannel retailing environment. It finds that consumers’ clothes recycling intention is determined by individual predispositions (environmental attitude, impulsive consumption), as well as by organizational arrangements (channel integration quality), as well as by the outcomes of their interaction (consumer satisfaction, brand identification). Conclusions are drawn, implications for omnichannel fast fashion retailing practice, as well as for further research, derived, and limitations discussed.
Current clinical practice is often unable to identify the causes of conductive hearing loss in the middle ear with sufficient certainty without exploratory surgery. Besides the large uncertainties due to interindividual variances, only partially understood cause–effect principles are a major reason for the hesitant use of objective methods such as wideband tympanometry in diagnosis, despite their high sensitivity to pathological changes. For a better understanding of objective metrics of the middle ear, this study presents a model that can be used to reproduce characteristic changes in metrics of the middle ear by altering local physical model parameters linked to the anatomical causes of a pathology. A finite-element model is, therefore, fitted with an adaptive parameter identification algorithm to results of a temporal bone study with stepwise and systematically prepared pathologies. The fitted model is able to reproduce well the measured quantities reflectance, impedance, umbo and stapes transfer function for normal ears and ears with otosclerosis, malleus fixation, and disarticulation. In addition to a good representation of the characteristic influences of the pathologies in the measured quantities, a clear assignment of identified model parameters and pathologies consistent with previous studies is achieved. The identification results highlight the importance of the local stiffness and damping values in the middle ear for correct mapping of pathological characteristics and address the challenges of limited measurement data and wide parameter ranges from the literature. The great sensitivity of the model with respect to pathologies indicates a high potential for application in model-based diagnosis.
A systematic study using a central composite design of experiments (DoE) was performed on the oxygen plasma surface modifications of two different polymers—Pellethane 2363-55DE, which is a polyurethane, and vinyltrimethoxysilane-grafted ethylene-propylene (EPR-g-VTMS), a cross-linked ethylene-propylene rubber. The impacts of four parameters—gas pressure, generator power, treatment duration, and process temperature—were assessed, with static contact angles and calculated surface free energies (SFEs) as the main responses in the DoE. The plasma effects on the surface roughness and chemistry were determined using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Through the sufficiently accurate DoE model evaluation, oxygen gas pressure was established as the most impactful factor, with the surface energy and polarity rising with falling oxygen pressure. Both polymers, though different in composition, exhibited similar modification trends in surface energy rise in the studied system. The SEM images showed a rougher surface topography after low pressure plasma treatments. XPS and subsequent multivariate data analysis of the spectra established that higher oxidized species were formed with plasma treatments at low oxygen pressures of 0.2 mbar.
This paper generalizes the theory of policy uncertainty with the new literature on rational inattention. First, the model demonstrates that inattention is dependent on the signal variance and the policy parameter. Second, I discover a novel trade-off showing that a policy instrument mitigates attention. Third, the policy instrument is non-linear and reciprocal to both the size and variance of the signal. The unifying theory creates new implications to economic theory and public policy alike.
One-pot synthesis of micron partly hollow anisotropic dumbbell shaped silica core-shell particles
(2016)
A facile method is described to prepare micron partly hollow dumbbell silica particles in a single step. The obtained particles consist of a large dense part and a small hollow lobe. The spherical dense core as well as the hollow lobe are covered by mesoporous channels. In the case of a smaller lobe these channels are responsible for the permeability of the shell which was demonstrated by confocal imaging and spectroscopy.
The increased availability of data gives rise to the use of machine learning methods for purposes like forecasting or quality control in operations management. Practitioners who want to employ these methods are faced with the task of choosing from a large number of available methods. We give an overview of classification methods and available implementations and present considerations for choosing appropriate methods.
On the design of an urban data and modeling platform and its application to urban district analyses
(2020)
An integrated urban platform is the essential software infrastructure for smart, sustainable and resilitent city planning, operation and maintenance. Today such platforms are mostly designed to handle and analyze large and heterogeneous urban data sets from very different domains. Modeling and optimization functionalities are usually not part of the software concepts. However, such functionalities are considered crucial by the authors to develop transformation scenarios and to optimized smart city operation. An urban platform needs to handle multiple scales in the time and spatial domain, ranging from long term population and land use change to hourly or sub-hourly matching of renewable energy supply and urban energy demand.
This article provides a stochastic agent-based model to exhibit the role of aggregation metrics in order to mitigate polarization in a complex society. Our sociophysics model is based on interacting and nonlinear Brownian agents, which allow us to study the emergence of collective opinions. The opinion of an agent, x i (t) is a continuous positive value in an interval [0, 1]. We find (i) most agent-metrics display similar outcomes. (ii) The middle-metric and noisy-metric obtain new opinion dynamics either towards assimilation or fragmentation. (iii) We show that a developed 2-stage metric provide new insights about convergence and equilibria. In summary, our simulation demonstrates the power of institutions, which affect the emergence of collective behavior. Consequently, opinion formation in a decentralized complex society is reliant to the individual information processing and rules of collective behavior.