Refine
Document Type
- Conference proceeding (1038) (remove)
Is part of the Bibliography
- yes (1038)
Institute
- Informatik (569)
- Technik (273)
- ESB Business School (163)
- Texoversum (24)
- Life Sciences (11)
- Zentrale Einrichtungen (2)
Publisher
- IEEE (222)
- Springer (139)
- Hochschule Reutlingen (112)
- Gesellschaft für Informatik (55)
- ACM (38)
- Association for Information Systems (AIS) (30)
- IARIA (19)
- SSRN (18)
- VDE Verlag GmbH (18)
- SCITEPRESS (14)
Human pose estimation (HPE) is integral to scene understanding in numerous safety-critical domains involving human-machine interaction, such as autonomous driving or semi-automated work environments. Avoiding costly mistakes is synonymous with anticipating failure in model predictions, which necessitates meta-judgments on the accuracy of the applied models. Here, we propose a straightforward human pose regression framework to examine the behavior of two established methods for simultaneous aleatoric and epistemic uncertainty estimation: maximum a-posteriori (MAP) estimation with Monte-Carlo variational inference and deep evidential regression (DER). First, we evaluate both approaches on the quality of their predicted variances and whether these truly capture the expected model error. The initial assessment indicates that both methods exhibit the overconfidence issue common in deep probabilistic models. This observation motivates our implementation of an additional recalibration step to extract reliable confidence intervals. We then take a closer look at deep evidential regression, which, to our knowledge, is applied comprehensively for the first time to the HPE problem. Experimental results indicate that DER behaves as expected in challenging and adverse conditions commonly occurring in HPE and that the predicted uncertainties match their purported aleatoric and epistemic sources. Notably, DER achieves smooth uncertainty estimates without the need for a costly sampling step, making it an attractive candidate for uncertainty estimation on resource-limited platforms.
Menopause is the permanent cessation of menstruation occurring naturally in women's aging. The most frequent symptoms associated with menopausal phases are mucosal dryness, increased weight and body fat, and changes in sleep patterns. Oral symptoms in menopause derived from saliva flow reduction can lead to dry mouth, ulcers, and alterations of taste and swallowing patterns. However, the oral health phenotype of postmenopausal women has not been characterized. The aim of the study was to determine postmenopausal women's oral phenotype, including medical history, lifestyle, and oral assessment through artificial intelligence algorithms. We enrolled 100 postmenopausal women attending the Dental School of the University of Seville were included in the study. We collected an extensive questionnaire, including lifestyle, medication, and medical history. We used an unsupervised k-means algorithm to cluster the data following standard features for data analysis. Our results showed the main oral symptoms in our postmenopausal cohort were reduced salivary flow and periodontal disease. Relying on the classical assessment of the collected data, we might have a biased evaluation of postmenopausal women. Then, we used artificial intelligence analysis to evaluate our data obtaining the main features and providing a reduced feature defining the oral health phenotype. We found 6 clusters with similar features, including medication affecting salivation or smoking as essential features to obtain different phenotypes. Thus, we could obtain main features considering differential oral health phenotypes of postmenopausal women with an integrative approach providing new tools to assess the women in the dental clinic.
We introduce bloomRF as a unified method for approximate membership testing that supports both point- and range-queries. As a first core idea, bloomRF introduces novel prefix hashing to efficiently encode range information in the hash-code of the key itself. As a second key concept, bloomRF proposes novel piecewisemonotone hash-functions that preserve local order and support fast range-lookups with fewer memory accesses. bloomRF has near-optimal space complexity and constant query complexity. Although, bloomRF is designed for integer domains, it supports floating-points, and can serve as a multi-attribute filter. The evaluation in RocksDB and in a standalone library shows that it is more efficient and outperforms existing point-range-filters by up to 4× across a range of settings and distributions, while keeping the false-positive rate low.
The dawn of the 21st Century has witnessed a tremendous increase in trade pacts among nations, resulting in renewed hopes for sustainable enterprise development in emerging economies worldwide. Ghana and other sub-Saharan African (SSA) countries have signed onto several North-South and South-South free trade agreements with the hope of strengthening their presence in the international trade arena, and to promote economic growth in SSA. For over two decades, however, very little has changed, and many have dashed their high hopes as enterprises continue to struggle in SSA. Not even the African Continental Free Trade Agreement (AfCFTA) could renew the hopes of sceptics. Several studies opined that enterprises in SSA could improve their domestic and international competitiveness by establishing mutually beneficial partnerships with their counterparts from the Global North and South. This study delved into the issues that affect North-South and South-South business collaborations and recommends key success factors that could help promote mutually beneficial cross-border business partnerships. The research includes both literature and empirical information on the key success factors of business partnerships between African enterprises as well as between African enterprises and firms from the Global North. We approached the study qualitatively using a phenomenological research design. Research participants included important stakeholders in Africa and Europe's international trade and sustainable enterprise development ecosystem. The study identified several challenges with the current business collaborations and recommended new ways of making such partnerships more beneficial.
Automatic segmentation is essential for the brain tumor diagnosis, disease prognosis, and follow-up therapy of patients with gliomas. Still, accurate detection of gliomas and their sub-regions in multimodal MRI is very challenging due to the variety of scanners and imaging protocols. Over the last years, the BraTS Challenge has provided a large number of multi-institutional MRI scans as a benchmark for glioma segmentation algorithms. This paper describes our contribution to the BraTS 2022 Continuous Evaluation challenge. We propose a new ensemble of multiple deep learning frameworks namely, DeepSeg, nnU-Net, and DeepSCAN for automatic glioma boundaries detection in pre-operative MRI. It is worth noting that our ensemble models took first place in the final evaluation on the BraTS testing dataset with Dice scores of 0.9294, 0.8788, and 0.8803, and Hausdorf distance of 5.23, 13.54, and 12.05, for the whole tumor, tumor core, and enhancing tumor, respectively. Furthermore, the proposed ensemble method ranked first in the final ranking on another unseen test dataset, namely Sub-Saharan Africa dataset, achieving mean Dice scores of 0.9737, 0.9593, and 0.9022, and HD95 of 2.66, 1.72, 3.32 for the whole tumor, tumor core, and enhancing tumor, respectively.
AI-based prediction and recommender systems are widely used in various industry sectors. However, general acceptance of AI-enabled systems is still widely uninvestigated. Therefore, firstly we conducted a survey with 559 respondents. Findings suggested that AI-enabled systems should be fair, transparent, consider personality traits and perform tasks efficiently. Secondly, we developed a system for the Facial Beauty Prediction (FBP) benchmark that automatically evaluates facial attractiveness. As our previous experiments have proven, these results are usually highly correlated with human ratings. Consequently they also reflect human bias in annotations. An upcoming challenge for scientists is to provide training data and AI algorithms that can withstand distorted information. In this work, we introduce AntiDiscriminationNet (ADN), a superior attractiveness prediction network. We propose a new method to generate an unbiased convolutional neural network (CNN) to improve the fairn ess of machine learning in facial dataset. To train unbiased networks we generate synthetic images and weight training data for anti-discrimination assessments towards different ethnicities. Additionally, we introduce an approach with entropy penalty terms to reduce the bias of our CNN. Our research provides insights in how to train and build fair machine learning models for facial image analysis by minimising implicit biases. Our AntiDiscriminationNet finally outperforms all competitors in the FBP benchmark by achieving a Pearson correlation coefficient of PCC = 0.9601.
Mobile monitoring of outpatients during cancer therapy becomes possible through technological advancements. This study leveraged a new remote patient monitoring app for in-between systemic therapy sessions. Patients’ evaluation showed that the handling is feasible. Clinical implementation must consider an adaptive development cycle for reliable operations.
This article proposes several modified quasi Z-source dc/dc boost converters. These can achieve soft-switching by using a clamp-switch network comprised of an active switch and a diode in parallel with a capacitor connected across one of the inductors of the Z-source network. In this way, ringing at the transistor switching node is mitigated, and the voltage at the turn-on of the transistor is reduced. Even a zero voltage switching (ZVS) of the main transistor is possible if the capacitor in the clamp-switch network is adequately chosen. The proposed circuit structure and operating mode are described and validated through simulations and measurements on a low-power prototype.
The volume includes papers presented at the International KES Conference on Human Centred Intelligent Systems 2023 (KES HCIS 2023), held in Rome, Italy on June 14–16, 2023. This book highlights new trends and challenges in intelligent systems, which play an important part in the digital transformation of many areas of science and practice. It includes papers offering a deeper understanding of the human-centred perspective on artificial intelligence, of intelligent value co-creation, ethics, value-oriented digital models, transparency, and intelligent digital architectures and engineering to support digital services and intelligent systems, the transformation of structures in digital businesses and intelligent systems based on human practices, as well as the study of interaction and the co-adaptation of humans and systems.
Current advances in Artificial Intelligence (AI) combined with other digitalization efforts are changing the role of technology in service ecosystems. Human-centered intelligent systems and services are the target of many current digitalization efforts and part of a massive digital transformation based on digital technologies. Artificial intelligence, in particular, is having a powerful impact on new opportunities for shared value creation and the development of smart service ecosystems. Motivated by experiences and observations from digitalization projects, this paper presents new methodological experiences from academia and practice on a joint view of digital strategy and architecture of intelligent service ecosystems and explores the impact of digitalization based on real case study results. Digital enterprise architecture models serve as an integral representation of business, information, and technology perspectives of intelligent service-based enterprise systems to support management and development. This paper focuses on the novel aspect of closely aligned digital strategy and architecture models for intelligent service ecosystems and highlights the fundamental business mechanism of AI-based value creation, the corresponding digital architecture, and management models. We present key strategy-oriented architecture model perspectives for intelligent systems.
In today’s education, healthcare, and manufacturing sectors, organizations and information societies are discussing new enhancements to corporate structure and process efficiency using digital platforms. These enhancements can be achieved using digital tools. Industry 5.0 and Society 5.0 give several potentials for businesses to enhance the adaptability and efficacy of their industrial processes, paving the door for developing new business models facilitated by digital platforms. Society 5.0 can contribute to a super-intelligent society that includes the healthcare industry. In the past decade, the Internet of Things, Big Data Analytics, Neural Networks, Deep Learning, and Artificial Intelligence (AI) have revolutionized our approach to various job sectors, from manufacturing and finance to consumer products. AI is developing quickly and efficiently. We have heard of the latest artificial intelligence chatbot, ChatGPT. OpenAI created this, which has taken the internet by storm. We tested the effectiveness of a considerable language model referred to as ChatGPT on four critical questions concerning “Society 5.0”, “Healthcare 5.0”, “Industry,” and “Future Education” from the perspectives of Age 5.0.
Enterprises and societies currently face essential challenges, and digital transformation can contribute to their resolution. Enterprise architecture (EA) is useful for promoting digital transformation in global companies and information societies covering ecosystem partners. The advancement of new business models can be promoted with digital platforms and architectures for Industry 4.0 and Society 5.0. Therefore, products from the sector of healthcare, manufacturing and energy, etc. can increase in value. The adaptive integrated digital architecture framework (AIDAF) for Industry 4.0 and the design thinking approach is expected to promote and implement the digital platforms and digital products for healthcare, manufacturing and energy communities more efficiently. In this paper, we propose various cases of digital transformation where digital platforms and products are designed and evaluated for digital IT, digital manufacturing and digital healthcare with Industry 4.0 and Society 5.0. The vision of AIDAF applications to perform digital transformation in global companies is explained and referenced, extended toward the digitalized ecosystems such as Society 5.0 and Industry 4.0.
The increase in distributed energy generation, such as photovoltaic systems (PV) or combined heat and power plants (CHP), poses new challenges to almost every distribution network operator (DNO). In the low-voltage (LV) grids, where installed PV capacity approaches the magnitude of household load, reverse power flow occurs at the secondary substa-tions. High PV penetration leads to voltage rise, flicker and loading problems. These problems have been addressed by the application of various techniques amongst which is the deployment of step voltage regulators (SVR). SVR can solve the voltage problem, but do not prevent or reduce reverse power flows. Therefore, the application of SVR in low voltage grids can result in significant power losses upstream. In this paper we present part of a research project investi-gating the application of remote-controlled cable cabinets (CC) with metering units in a low-voltage network as a possible alternative for SVR. A new generation of custom-made remote-control cable cabinets has been deployed and dynamic network reconfigurations (NR) have been realized with the following objectives: (i) reduction of reverse power flow through the secondary substation to the upstream network and therefore a reduction of upstream losses, (ii) reduction of the voltage rise caused by distributed energy resources and (iii) load balancing in the low-voltage grid. Secondary objec-tives are to improve the DNO's insight into the state of the network and to provide further information on future smart grid integration.
Werkzeugmaschinen sind im Bereich des Maschinen- und Anlagenbau die größte Branche, mit denen auch in Unternehmen anderer Bereiche (z. B. Automobilbau, Aerospace) wesentliche Teile der Bruttowertschöpfung stattfinden. (Destatis, 2022) Das dynamische Verhalten von Werkzeugmaschinen beeinflusst in entscheidendem Maße die Produktivität der Produktionsanlage und die Qualität der darauf erzeugten Werkstücke. Sowohl fremderregte Schwingungen (z. B. Unwucht, Pulsation, periodisch schwankende Prozesskräfte) als auch selbsterregte Schwingungen (z. B. Rattern) führen zu schlechter Qualität der gefertigten Bauteile. Das dynamische Verhalten vonWerkzeugmaschinen wird durch die Masse, Dämpfung und Steifigkeit der einzelnen Komponenten (z. B. Maschinenbett, Ständer, Schlitten) als auch der im Kraftfluss liegenden Fügestellen (z. B. Führungen, Antriebe) beeinflusst. In diesem Beitrag werden die Auswirkungen von konstruktiven Modifikationen der Dämpfung in Gestellbauteilen bezüglich des dynamischen Verhaltens an der Zerspanstelle näher beleuchtet.
The replacement of conventional material with recyclates affects product personality, particularly regarding sustainability aspects influencing consumer behaviour. A definition of personality for products made of recyclates is missing in literature. As these products require appropriate aesthetics based on material origin to communicate the advantage concerning sustainability, there is a need for research in this regard. This paper aims to develop an adequate personality of a reusable water bottle made of ocean plastic by collecting personality traits that evoke associations related to the material's origin and sustainability. We conducted two quantitative field studies. Study 1 collected associated visual perceived attributes and context-related personality traits in order to develop and visualize a preliminary design. Study 2 evaluated the design regarding associated personality traits. The overall outcome was a product personality scale consisting of 23 items plus a concrete design recommendation for a water bottle made of recycled ocean plastic. The assessment of degree of sustainability was strongly influenced by participants’ associations with personal use, familiarity with usage and the factor of stability and resilience.
In recent years, 3D facial reconstructions from single images have garnered significant interest. Most of the approaches are based on 3D Morphable Model (3DMM) fitting to reconstruct the 3D face shape. Concurrently, the adoption of Generative Adversarial Networks (GAN) has been gaining momentum to improve the texture of reconstructed faces. In this paper, we propose a fundamentally different approach to reconstructing the 3D head shape from a single image by harnessing the power of GAN. Our method predicts three maps of normal vectors of the head’s frontal, left, and right poses. We are thus presenting a model-free method that does not require any prior knowledge of the object’s geometry to be reconstructed.
The key advantage of our proposed approach is the substantial improvement in reconstruction quality compared to existing methods, particularly in the case of facial regions that are self-occluded in the input image. Our method is not limited to 3d face reconstruction. It is generic and applicable to multiple kinds of 3D objects. To illustrate the versatility of our method, we demonstrate its efficacy in reconstructing the entire human body.
By delivering a model-free method capable of generating high-quality 3D reconstructions, this paper not only advances the field of 3D facial reconstruction but also provides a foundation for future research and applications spanning multiple object types. The implications of this work have the potential to extend far beyond facial reconstruction, paving the way for innovative solutions and discoveries in various domains.
The aim of this work is the development of artificial intelligence (AI) application to support the recruiting process that elevates the domain of human resource management by advancing its capabilities and effectiveness. This affects recruiting processes and includes solutions for active sourcing, i.e. active recruitment, pre-sorting, evaluating structured video interviews and discovering internal training potential. This work highlights four novel approaches to ethical machine learning. The first is precise machine learning for ethically relevant properties in image recognition, which focuses on accurately detecting and analysing these properties. The second is the detection of bias in training data, allowing for the identification and removal of distortions that could skew results. The third is minimising bias, which involves actively working to reduce bias in machine learning models. Finally, an unsupervised architecture is introduced that can learn fair results even without ground truth data. Together, these approaches represent important steps forward in creating ethical and unbiased machine learning systems.
The 17 SDGs, as agreed upon by the international community, are designed to be implemented across all levels of human activity. Alongside the level of international politics, this also includes the local levels, national politics, wider society, and the economic sphere. Many channels are called on to further implementation, including the transfer of technology to developing and emerging countries. As the patent holders, this must include the active participation of companies. While the literature examines the important role of technology transfer in North-South business-to-business (B2B) partnerships, studies on the technology transfer between European and African companies are scarce. Therefore, in this study we use original data from 26 interviews conducted with managers engaged in sales partnerships between German manufacturers and their distributors in African markets to examine the existence and forms of technology transfer. We find that training and marketing excellence are the predominant forms of technology transfer and based on that suggest a refinement of established frameworks on B2B technology transfer.
The relevance of Robotic Process Automation (RPA) has increased over the last few years. Combining RPA with Artificial Intelligence (AI) can further enhance the business value of the technology. The aim of this research was to analyze applications, terminology, benefits, and challenges of combining the two technologies. A total of 60 articles were analyzed in a systematic literature review to evaluate the aforementioned areas. The results show that by adding AI, RPA applications can be used in more complex contexts, it is possible to minimize the human factor during the development process, and AI-based decision-making can be integrated into RPA routines. This paper also presents a current overview of the used terminology. Moreover, it shows that by integrating AI, some unseen challenges in RPA projects can emerge, but also a lot of new benefits will come along with it. Based on the outcome, it is concluded that the topic offers a lot of potential, but further research and development is required. The result of this study help researches to gain an overview of the state-of-the-art in combining RPA and AI.
We present the results of an extensive characterization of the performance and stability of a third-order continuous-time delta-sigma modulator with active coefficient error compensation. Using our previously published coefficient tuning technique, process variation induced R-C time-constant (TC) errors in the forward signal path can be compensated indirectly using continuously tunable DACs in the feedback path. To validate our technique experimentally with a range of real TC variations, we designed a modulator with discretely configurable integration capacitor arrays in a 0.35-μm CMOS process. We configured the capacitors of the fabricated device for a range of total TC variations from -28.4 % to +19.3 % and measured the signal-to-noise ratio (SNR) as a function of the input amplitude before and after compensating the variations electrically using the feedback DACs. The results show that our tuning technique is capable of restoring the desired nominal modulator performance over the entire parameter variation range, including the system’s nominal maximum stable amplitude (MSA).
Simulation eines dezentralen Regelungssystems zur netzdienlichen Erzeugung von grünem Wasserstoff
(2023)
Wasserstoff wird einen bedeutenden Beitrag zum Wandel von Industrie und Gesellschaft in eine klimaneutrale Zukunft leisten. Der Aufbau und die ökologisch und ökonomisch sinnvolle Nutzung einer Wasserstoffinfrastruktur sind hierbei die zentralen Herausforderungen. Ein notwendiger Baustein ist die effiziente Bereitstellung von grünem Strom und dem daraus produzierten grünen Wasserstoff. Der vorliegende Beitrag stellt ein dezentrales Regel- und Kommunikationssystem vor, mit dem Angebot und Nachfrage von grünem Strom und Wasserstoff in einem System aus dezentralen Akteuren in Einklang gebracht werden. In einer hierzu entwickelten Simulationsumgebung wird die Funktion und der Nutzen dieses dezentralen Ansatzes verdeutlicht.
As fuel prices climb and the global automotive sector migrates to more sustainable vehicle technologies, the future of South Africa’s minibus taxis is in flux. The authors’ previous research has found that battery electric technology struggles to meet all the mobility requirements of minibus taxis. They investigate the technical feasibility of powering taxis with hydrogen fuel cells instead. The following results are projected using a custom-built simulator, and tracking data of taxis based in Stellenbosch, South Africa. Each taxi requires around 12 kg of hydrogen gas per day to travel an average distance of 360 km. 465 kWh of electricity, or 860 m2 of solar panels, would electrolyse the required green hydrogen. An economic analysis was conducted on the capital and operational expenses of a system of ten hydrogen taxis and an electrolysis plant. Such a pilot project requires a minimum investment of € 3.8 million (R 75 million), for a 20 year period. Although such a small scale roll-out is technically feasible and would meet taxis’ performance requirements, the investment cost is too high, making it financially unfeasible. They conclude that a large scale solution would need to be investigated to improve financial feasibility; however, South Africa’s limited electrical generation capacity poses a threat to its technical feasibility. The simulator is uploaded at: https://gitlab.com/eputs/ev-fleet-sim-fcv-model.
This project aims to evaluate existing big data infrastructures for their applicability in the operating room to support medical staff with context-sensitive systems. Requirements for the system design were generated. The project compares different data mining technologies, interfaces, and software system infrastructures with a focus on their usefulness in the peri-operative setting. The lambda architecture was chosen for the proposed system design, which will provide data for both postoperative analysis and real-time support during surgery.
Introduction: Even if there is a standard procedure of CI surgery, especially in pediatric surgery surgical steps often differ individually due to anatomical variations, malformations or unforseen events. This is why every surgical report should be created individually, which takes time and relies on the correct memory of the surgeon. A standardized recording of intraoperative data and subsequent storage as well as text processing would therefore be desirable and provides the basis for subsequent data processing, e.g. in the context of research or quality assurance.
Method: In cooperation with Reutlingen University, we conducted a workflow analysis of the prototype of a semi-automatic checklist tool. Based on automatically generated checklists generated from BPMN models a prototype user interface was developed for an android tablet. Functions such as uploading photos and files, manual user entries, the interception of foreseeable deviations from the normal course of operations and the automatic creation of OP documentation could be implemented. The system was tested in a remote usability test on a petrous bone model.
Result: The user interface allows a simple intuitive handling, which can be well implemented in the intraoperative setting. Clinical data as well as surgical steps could be individually recorded and saved via DICOM. An automatic surgery report could be created and saved.
Summary: The use of a dynamic checklist tool facilitates the capture, storage and processing of surgical data. Further applications in clinical practice are pending.
Das Motto der diesjahrigen Informatics Inside wird, wie ich finde, in beeindruckender Weise gegenwärtig durch Werkzeuge der generativen KI demonstriert. ChatGPT, Midjourney und Co. ermöglichen uns eine innovative Interaktion mit Information, die uns auffordert unsere bisherigen Vorstellungen von Erkenntnisfähigkeit und Wertschöpfung zu überdenken. Diese Notwendigkeit ist in der Informatik zwar bereits seit den 1930er Jahren bekannt, aber erst die praktische Umsetzung mit modernen Computern macht die formalen Überlegungen hierzu erfahrbar. Daraus resultierende Verunsicherungen, beispielsweise im Hinblick auf Arbeitsplatze, sind gleichermaßen Herausforderung und Chance dieses wichtige Thema einer breiten Öffentlichkeit bekannt zu machen. Hierbei wird einmal mehr deutlich wie tiefgreifend die Informatik in unsere Leben hineinwirkt und welche Verantwortung damit verbunden ist. Vor diesem großen Hintergrund könnte der Hinweis auf Bits und Bytes im Tagungsmotto fast schon wie ein unbedeutendes Detail wirken, was jedoch weit gefehlt wäre. Folgen aus Null und Eins bilden nach wie vor die Bausteine der Informatik und es ist die Aufgabe der angewandten Informatik hieraus nützliche und sinnvolle Anwendungen zu kombinieren.
Die Informatics Inside bietet hierfür einen entsprechenden Rahmen bereits in der akademischen Ausbildung. Unsere Studierenden planen, organisieren und gestalten diese Tagung jedes Jahr eigenstandig. Auch die Themen für die Fachbeiträge wurden von den Studierenden eigenstandig ausgewählt. Aus meiner Sicht bilden die resultierenden Ausarbeitungen in diesem Tagungsband die spannende Vielfalt von Anwendungsthemen des Human Centered Computings sehr gut ab. Dabei zeigt sich ebenfalls deutlich die Bereitschaft unserer Studierenden, die Verantwortung für eine sinnvolle und kreative Gestaltung der digitalen Zukunft zu übernehmen.
Reutlingen, den 15.11.2023 Prof. Dr. rer. medic. Christian Thies
Mit zunehmender Dynamik im Forschungsumfeld – Digitalisierung der Produktentwicklung – steigen neben der Komplexität auch die technischen Anforderungen an die künftigen Entscheidungsprozesse. Die Einführung von neuen IT-Systemen zur Automation von Entscheidungen haben Anpassungen in den derzeitigen Geschäftsprozessen der Unternehmen zur Folge. Für eine erfolgreiche Implementierung neuer IT-Informationstools gilt es im Voraus mögliche Auswirkungen auf die bisherigen Anwendersysteme genauer zu untersuchen. Neue Technologien, KI-Informationssysteme oder auch neues Wissen entstehen in der Wissenschaft oft durch Interpretation und Synthese von bestehendem Wissen. Aus diesem Grund nimmt die Qualität von Literaturanalysen eine immer größere Relevanz in der Ingenieur- und Informatikwissenschaft ein. Neben der Anzahl an Publikationen wächst auch der Aufwand für die strukturierte Literaturrecherche (SLA). Die Autoren stellen in diesem Paper den Rechercheprozess und die Ergebnisse einer SLA vor. Mit dieser Arbeit soll der derzeitige Forschungsstand zur Entscheidungsunterstützung in der Produktentwicklung von Klein- und mittelständischen Unternehmen sowie Großunternehmen in der
Automobilbranche ermittelt und nach Analyse sowie Bewertung mögliche Forschungslücken zu automatisierten Entscheidungsunterstützungssystemen (aEUS) aufgezeigt werden.
Application systems often need to be deployed in different variants if requirements that influence their implementation, hosting, and configuration differ between customers. Therefore, deployment technologies, such as Ansible or Terraform, support a certain degree of variability modeling. Besides, modern application systems typically consist of various software components deployed using multiple deployment technologies that only support their proprietary, non-interoperable variability modeling concepts. The Variable Deployment Metamodel (VDMM) manages the deployment variability across heterogeneous deployment technologies based on a single variable deployment model. However, VDMM currently only supports modeling conditional components and their relations which is sometimes too coarse-grained since it requires modeling entire components, including their implementation and deployment configuration for each different component variant. Therefore, we extend VDMM by a more fine-grained approach for managing the variability of component implementations and their deployment configurations, e.g., if a cheap version of a SaaS deployment provides only a community edition of the software and not the enterprise edition, which has additional analytical reporting functionalities built-in. We show that our extended VDMM can be used to realize variable deployments across different individual deployment technologies using a case study and our prototype OpenTOSCA Vintner.
Modern component-based architectural styles, e.g., microservices, enable developing the components independently from each other. However, this independence can result in problems when it comes to managing issues, such as bugs, as developer teams can freely choose their technology stacks, such as issue management systems (IMSs), e.g., Jira, GitHub, or Redmine. In the case of a microservice architecture, if an issue of a downstream microservice depends on an issue of an upstream microservice, this must be both identified and communicated, and the downstream service’s issues should link to its causing issue. However, agile project management today requires efficient communication, which is why more and more teams are communicating through comments in the issues themselves. Unfortunately, IMSs are not integrated with each other, thus, semantically linking these issues is not supported, and identifying such issue dependencies from different IMSs is time-consuming and requires manual searching in multiple IMS technologies. This results in many context switches and prevents developers from being focused and getting things done. Therefore, in this paper, we present a concept for seamlessly integrating different IMS technologies into each other and providing a better architectural context. The concept is based on augmenting the websites of issue management systems through a browser extension. We validate the approach with a prototypical implementation for the Chrome browser. For evaluation, we conducted expert interviews, which approved that the presented approach provides significant advantages for managing issues of agile microservice architectures.
In a recently developed study programme at Reutlingen University, which focuses on practical orientations, an innovative product with solid company references is to be defined and realised by student teams. On the basis of this product, all subjects of the business engineering study programme “Sustainable Production and Business” are taught. By focusing on three main paths of future skills that have been developed by NextSkills to analyse upcoming social changes, global challenges and fields of work that are innovation-driven and agile, the new study programme aims to create responsible leaders who will shape global businesses respectfully. Thereby, different TRIZ tools help to support students in developing their own products with a focus on sustainability and pay off on the future skills enhancement. Further, students get to know TRIZ tools in an unbiased way, unburdened by too much theory, and are thus continuously supported in the progressing product development process that accompanies their studies. Hence, students perceive TRIZ on the one hand as a method to develop sustainable products and, on the other hand, to find sustainable solutions for everyday problems. The knowledge and positive experiences gained in this way should then arouse curiosity for the TRIZ class at the end of the study programme. The students can graduate with a TRIZ Level 1 certificate. Thereby, as many students as possible are introduced to the TRIZ methods, and the TRIZ tool is spread widely.
Measuring cardiorespiratory parameters in sleep, using non-contact sensors and the Ballistocardiography technique has received much attention due to the low-cost, unobtrusive, and non-invasive method. Designing a user-friendly, simple-to-use, and easy-to-deployment preserving less error-prone remains open and challenging due to the complex morphology of the signal. In this work, using four forcesensitive resistor sensors, we conducted a study by designing four distributions of sensors, in order to simplify the complexity of the system by identifying the region of interest for heartbeat and respiration measurement. The sensors are deployed under the mattress and attached to the bed frame without any interference with the subjects. The four distributions are combined in two linear horizontal, one linear vertical, and one square, covering the influencing region in cardiorespiratory activities. We recruited 4 subjects and acquired data in four regular sleeping positions, each for a duration of 80 seconds. The signal processing was performed using discrete wavelet transform bior 3.9 and smooth level of 4 as well as bandpass filtering. The results indicate that we have achieved the mean absolute error of 2.35 and 4.34 for respiration and heartbeat, respectively. The results recommend the efficiency of a triangleshaped structure of three sensors for measuring heartbeat and respiration parameters in all four regular sleeping positions.
Large critical systems, such as those created in the space domain, are usually developed by a large number of organizations and, furthermore, they have to comply with standards. Yet, the different stakeholders often do not have a common understanding of the needed quality of requirements specifications. Achieving such a common understanding is a laborious process that is currently not sufficiently supported. Moreover, such a common understanding must be aligned with the standards. In this paper, we present an approach that can be used to align the different stakeholder perceptions regarding the quality of requirements specifications. Existing quality models for requirements specifications are analyzed for equivalences, and transferred into a common representation, the so-called Aligned Quality Map (AQM). Furthermore, a process is defined that supports the alignment of different stakeholder perspectives with regard to the quality of requirements specifications using AQM, which is validated in a case study in the context of European space projects. AQM has been created and populated with an initial set of quality models. It is designed in such way that it can be extended to include further quality models. The case study has shown that an alignment of different stakeholder perspectives and the quality model of the European Cooperation for Space Standardization using AQM is feasible. The approach allows for aligning different stakeholder perspectives for a common understanding of the quality of requirements specifications in the context of standards. Furthermore, AQM supports the assessment of requirements specifications.
It is widely recognized that Education for Sustainable Development (ESD) plays a critical role in creating a more sustainable world by fostering the development of the knowledge, skills, understanding, values, and actions necessary for such change (UNESCO, 2020). In this context, ESD represents a holistic approach that focuses on lifelong learning to create informed people who can make decisions today and in the future. Related to the textile and fashion industry, ESD is an appropriate approach to continuously implement sustainability aspects in education and training. To achieve this goal, the European project "Sustainable Fashion Curriculum at Textile Universities in Europe - Development, Implementation and Evaluation of a Teaching Module for Educators" (Fashion DIET) has developed a digital teaching module in a partnership between a University of Education and universities with textile departments. The main objective of the project is to elaborate an ESD module for university lecturers in order to introduce a sustainable fashion curriculum in textile universities in Europe and implement it in educational systems. The project therefore aims to train educators along the textile supply chain, to inform the young generation about the latest aspects of sustainability and raise awareness by implementing ESD in textile education. This paper presents the learning outcomes of the modules on sustainable fashion design and related production technologies developed by the technical university partners, as part of the total of 42 courses covering didactic-methodological approaches and the sustainable orientation of the fashion market, offered at the consortium level. The project content is made available as Open Educational Resources through Glocal Campus, an open-access e-learning platform that enables virtual collaboration between universities.
Advancing mental health diagnostics: AI-based method for depression detection in patient interviews
(2023)
In this paper, we present a novel artificial intelligence (AI) application for depression detection, using advanced transformer networks to analyse clinical interviews. By incorporating simulated data to enhance traditional datasets, we overcome limitations in data protection and privacy, consequently improving the model’s performance. Our methodology employs BERT-based models, GPT-3.5, and ChatGPT-4, demonstrating state-of-the-art results in detecting depression from linguistic patterns and contextual information that significantly outperform previous approaches. Utilising the DAIC-WOZ and Extended-DAIC datasets, our study showcases the potential of the proposed application in revolutionising mental health care through early depression detection and intervention. Empirical results from various experiments highlight the efficacy of our approach and its suitability for real-world implementation. Furthermore, we acknowledge the ethical, legal, and social implications of AI in mental health diagnostics. Ultimately, our study underscores the transformative potential of AI in mental health diagnostics, paving the way for innovative solutions that can facilitate early intervention and improve patient outcomes.
This research evaluates current measurement scales for ambidexterity and proposes a new approach for the measurement of this important construct. We argue that current measurement approaches may be unsuitable to capture the concept of ambidexterity. Through a systematic scale development process, we derive a measurement scale with dual items that simultaneously refer to both dimensions, exploitation and exploration, thus reflecting the true nature of ambidexterity. An extensive pre-test with 39 executives suggests that our scale is suitable for capturing ambidexterity. Our measurement model enhances conceptual clarity of ambidexterity and can serve as a base for future investigations of the concept.
In the era of digital transformation, the notion of software quality transcends its traditional boundaries, necessitating an expansion to encompass the realms of value creation for customers and the business. Merely optimizing technical aspects of software quality can result in diminishing returns. Product discovery techniques can be seen as a powerful mechanism for crafting products that align with an expanded concept of quality - one that incorporates value creation. Previous research has shown that companies struggle to determine appropriate product discovery techniques for generating, validating, and prioritizing ideas for new products or features to ensure they meet the needs and desires of the customers and the business. For this reason, we conducted a grey literature review to identify various techniques for product discovery. First, the article provides an overview of different techniques and assesses how frequently they are mentioned in the literature review. Second, we mapped these techniques to an existing product discovery process from previous research to provide concrete guidelines for establishing product discovery in their organizations. The analysis shows, among other things, the increasing importance of techniques to structure the problem exploration process and the product strategy process. The results are interpreted regarding the importance of the techniques to practical applications and recognizable trends.
Motivation
In order to enable context-aware behavior of surgical assistance systems, the acquisition of various information about the current intraoperative situation is crucial. To achieve this, the complex task of situation recognition can be delegated to a specialized system. Consequently, a standardized interface is required for the seamless transfer of the recognized contextual information to the assistance systems, enabling them to adapt accordingly.
Methods
Our group analyzed four medical interface standards to determine their suitability for exchanging intraoperative contextual information. The assessment was based on a harmonized data and service model derived from the requirements of expected context-aware use cases. The Digital Imaging and Communications in Medicine (DICOM) and IEEE 11073 for Service-oriented Device Connectivity (SDC) were identified as the most appropriate standards.
Results
We specified how DICOM Unified Procedure Steps (UPS), can be used to effectively communicate contextual information. We proposed the inclusion of attributes to formalize different granularity levels of the surgical workflow.
Conclusions
DICOM UPS SOP classes can be used for the exchange of intraoperative contextual information between a situation recognition system and surgical assistance systems. This can pave the way for vendor-independent context awareness in the OR, leading to targeted assistance of the surgical team and an improvement of the surgical workflow.
Framework for integrating intelligent product structures into a flexible manufacturing system
(2023)
Increasing individualisation of products with a high variety and shorter product lifecycles result in smaller lot sizes, increasing order numbers, and rising data and information processing for manufacturing companies. To cope with these trends, integrated management of the products and manufacturing information is necessary through a “product-driven” manufacturing system. Intelligent products that are integrated as an active element within the controlling and planning of the manufacturing process can represent flexibility advantages for the system. However, there are still challenges regarding system integration and evaluation of product intel-ligence structures. In light of these trends, this paper proposes a conceptual frame-work for defining, analysing, and evaluating intelligent products using the example of an assembly system. This paper begins with a classification of the existing problems in the assembly and a definition of the intelligence level. In contrast to previous approaches, the analysis of products is expanded to five dimensions. Based on this, a structured evaluation method for a use case is presented. The structure of solving the assembly problem is provided by the use case-specific ontology model. Results are presented in terms of an assignment of different application areas, linking the problem with the target intelligence class and, depending on the intelligence class of the product, suggesting requirements for implementation. The conceptual frame-work is evaluated by utilising a case study in a learning factory. Here, the model-mix assembly is controlled actively by the workpiece carrier in terms of transferring the variant-specific work instructions to the operator and the collaborative robot (cobot) at the workstations. The resulting system thus enables better exploitation of the poten-tials through less frequent errors and shorter search times. Such an implementation has demonstrated that the intelligent workpiece carrier represents an additional part for realising a cyber-physical production system (CPPS).
Modern wide bandgap power devices promise higher power conversion performance if the device can be operated reliably. As switching speed increases, the effects of parasitic ringing become more prominent, causing potentially damaging overvoltages during device turn-off. Estimating the expected additional voltage caused by such ringing enables more reliable designs. In this paper, we present an analytical expression to calculate the expected overvoltage caused by parasitic ringing based on parasitic element values and operating point parameters. Simulations and measurements confirm that the expression can be used to find the smallest rise time of the switches’ drain-source voltage for minimum overvoltage. The given expression also allows the prediction of the trade off overvoltage amplitude in case of faster required rise times.
Analog integrated circuit sizing still relies heavily on human expert knowledge as previous automation approaches have not found wide-spread acceptance in industry. One strand, the optimization-based automation, is often discarded due to inflated constraining setups, infeasible results or excessive run times. To address these deficits, this work proposes a alternative optimization flow featuring a designer’s intuition for feasible design spaces through integration of expert knowledge based on the gm/ID-method. Moreover, the extensive run times of simulation-based optimization flows are overcome by incorporating computationally efficient machine learning methods. Neural network surrogate models predicting eleven performance parameters increase the evaluation speed by 3 400× on average compared to a simulator. Additionally, they enable the use of optimization algorithms dependent on automatic differentiation, that would otherwise be unavailable in this field. First, an up to 4× more efficient way for sampling training data based on the aforementioned space is detailed. After presenting the architecture and training effort regarding the surrogate models, they are employed as part of the objective function for sizing three operational amplifiers with three different optimization algorithms. Additionally, the benefits of using the gm/ID-method become evident when considering technology migration, as previously found solutions may be reused for other technologies.
Non-fungible tokens (NFTs) are unique digital assets that have recently gained significant popularity, particularly in the digital art sector. The success of NFTs and other blockchain-based innovations depends on their ac-acceptance and use by consumers. This study aims to understand the impact of moral values on the acceptance of NFTs. Based on a quantitative survey with over 800 complete responses, the analysis shows that moral aspects of NFTs are indeed important for potential users. However, there is an attitude-behavior gap, as the positive impact of moral values on the intention to use NFTs is not reflected in the actual current usage of NFTs by the respondents. This study contributes to knowledge by providing new empirical data on the acceptance of NFTs and highlighting the role of moral values on the acceptance decision.
Software development teams have to face stress caused by deadlines, staff turnover, or individual differences in commitment, expertise, and time zones. While students are typically taught the theory of software project management, their exposure to such stress factors is usually limited. However, preparing students for the stress they will have to endure once they work in project teams is important for their own sake, as well as for the sake of team performance in the face of stress. Team performance has been linked to the diversity of software development teams, but little is known about how diversity influences the stress experienced in teams. In order to shed light on this aspect, we provided students with the opportunity to self-experience the basics of project management in self-organizing teams, and studied the impact of six diversity dimensions on team performance, coping with stressors, and positive perceived learning effects. Three controlled experiments at two universities with a total of 65 participants suggest that the social background impacts the perceived stressors the most, while age and work experience have the highest impact on perceived learnings. Most diversity dimensions have a medium correlation with the quality of work, yet no significant relation to the team performance. This lays the foundation to improve students’ training for software engineering teamwork based on their diversity-related needs and to create diversity-sensitive awareness among educators, employers and researchers.
OpenAPI, WADL, RAML, and API Blueprint are popular formats for documenting Web APIs. Although these formats are in general both human and machine-readable, only the part of the format describing the syntax of a Web API is machine-understandable. Descriptions, which explain the meaning and purpose of Web API elements, are embedded as natural language text snippets into documents and target human readers but not machines. To enable machines to read and process these state-of-practice Web API documentation, we propose a Transformer model that solves the generic task of identifying a Web API element within a syntax structure that matches a natural language query. For our first prototype, we focus on the Web API integration task of matching output with input parameters and fined-tuned a pre-trained CodeBERT model to the downstream task of question answering with samples from 2,321 OpenAPI documentation. We formulate the original question answering problem as a multiple choice task: given a semantic natural language description of an output parameter (question) and the syntax of the input schema (paragraph), the model chooses the input parameter (answer) in the schema that best matches the description. The paper describes the data preparation, tokenization, and fine-tuning process as well as discusses possible applications of our model as part of a recommender system. Furthermore, we evaluate the generalizability and the robustness of our fine-tuned model, with the result that it achieves an accuracy of 81.46% correctly chosen parameters.
Patterns are virtually simulated in 3D CAD programs before production to check the fit. However, achieving lifelike representations of human avatars, especially regarding soft tissue dynamics, remains challenging. This is mainly since conventional avatars in garment CAD programs are simulated with a continuous hard surface and not corresponding to the human physical and mechanical body properties of soft tissue. In the real world, the human body’s natural shape is affected by the contact pressure of tight-fitting textiles. To verify the fit of a simulated garment, the interactions between the individual body shape and the garment must be considered. This paper introduces an innovative approach to digitising the softness of human tissue using 4D scanning technology. The primary objective of this research is to explore the interactions between tissue softness and different compression levels of apparel, exerting pressure on the tissue to capture the changes in the natural shape. Therefore, to generate data and model an avatar with soft body physics, it is essential to capture the deform ability and elasticity of the soft tissue and map it into the modification options for a simulation. To aim this, various methods from different fields were researched and compared to evaluate 4D scanning as the most suitable method for capturing tissue deformability in vivo. In particular, it should be considered that the human body has different deformation capabilities depending on age, the amount of muscle and body fat. In addition, different tissue zones have different mechanical properties, so it is essential to identify and classify them to back up these properties for the simulation. It has been shown that by digitising the obtained data of the different defined applied pressure levels, a prediction of the deformation of the tissue of the exact person becomes possible. As technology advances and data sets grow, this approach has the potential to reshape how we verify fit digitally with soft avatars and leverage their realistic soft tissue properties for various practical purposes.
Platforms feature increasingly complex architectures with regard to interconnecting with other digital platforms as well as with a variety of devices and services. This development also impacts the structure of digital platform ecosystems and forces providers of these services, devices, and services to incorporate this complexity in their decision-making. To contribute to the existing body of knowledge on measuring ecosystem complexity, the present research proposes two key artefacts based on ecosystem intelligence: On the one hand, complementarity graphs represent ecosystems with an ecosystem's functional modules as vertices and complementarities as edges. The nodes carry information about the category membership of the module. On the other hand, a process is suggested that can collect important information for ecosystem intelligence using proxies and web scraping. Our approach allows replacing data, which today is largely unavailable due to competitive reasons. We demonstrated the use of the artefacts in category-oriented complementarity maps that aggregate the information from complementarity graphs and support decision-making. They show which combination of module categories creates strong and weak complementarities. The paper evaluates complementarity maps and the data collection process by creating category-oriented complementarity graphs on the Alexa skill ecosystem and concludes with a call to pursue more research based on functional ecosystem intelligence.
Most Question-answering (QA) systems rely on training data to reach their optimal performance. However, acquiring training data for supervised systems is both time-consuming and resource-intensive. To address this, in this paper, we propose TFCSG, an unsupervised similar question retrieval approach that leverages pre-trained language models and multi-task learning. Firstly, topic keywords in question sentences are extracted sequentially based on a latent topic-filtering algorithm to construct unsupervised training corpus data. Then, the multi-task learning method is used to build the question retrieval model. There are three tasks designed. The first is a short sentence contrastive learning task. The second is the question sentence and its corresponding topic sequence similarity judgment task. The third is using question sentences to generate their corresponding topic sequence task. The three tasks are used to train the language model in parallel. Finally, similar questions are obtained by calculating the cosine similarity between sentence vectors. The comparison experiment on public question datasets that TFCSG outperforms the comparative unsupervised baseline method. And there is no need for manual marking, which greatly saves human resources.
Impact of a large distribution network on radiation characteristics of planar spiral antenna arrays
(2023)
Designing antenna arrays with a central feed point has gained ground in the antenna technique. This approach, which is usually applied because of manufacturing costs, is difficult to achieve and leads to a large feeding network. The impact of which is numerically investigated in the present work. Upon comparing three different antennas, it is shown that the enlargement of the feed strongly affects the antenna's overall dimensions and the antenna's radiation characteristics. The antenna with the plug-in solution is not only small in size but also performs better compared to antennas with a central feed point. Considering the high effort in designing the feed network with a central point and the influence of the resulting enlarged network on the dimensions and radiation characteristics of the antenna, the cost saving in production can be put into perspective.
Intelligent Tutoring Systems (ITSs) are increasingly used in modern education to automatically give students individual feedback on their performance. The advantage for students is fast individual feedback on their answers to asked questions, while lecturers benefit from considerable time savings and easy delivery of educational material. Of course, it is important that the provided feedback is as effective as direct feedback from the lecturer. However, in digital teaching, lecturers cannot assess the student’s knowledge precisely but can only provide information on which questions were answered correctly and incorrectly. Therefore, this paper presents a concept for integrating ITS elements into the gamified e-learning platform IT-REX so that the feedback quality can be improved to support students in the best possible way.
Applications often need to be deployed in different variants due to different customer requirements. However, since modern applications often need to be deployed using multiple deployment technologies in combination, such as Ansible and Terraform, the deployment variability must be considered in a holistic way. To tackle this, we previously developed Variability4TOSCA and the prototype OpenTOSCA Vintner, which is a TOSCA preprocessing and management layer that implements Variability4TOSCA. In this demonstration, we present a detailed case study that shows how to model a deployment using Variability4TOSCA, how to resolve the variability using Vintner, and how the result can be deployed.
Transforming our food system is important to achieving global climate neutrality and food security. Germany has set a national target of reaching a 30% share in organic farming to support the goal. When looking at the transformation process from conventional to organic farming, it becomes apparent that measures need to be taken to reach this anticipated goal. A particular emphasis of this work is placed on finding a digital solution and process improvements to ensure longevity and efficiency. Interviews with actors along the farm-to-fork value chain were conducted to identify central barriers and drivers of organic transformation. The results of the interviews show firstly, that three subsystems need to be distinguished when talking about the farm-to-fork value chain: (1) farmers, (2) intermediaries, and (3) the canteen system. Although all three subsystems can be combined to form a coherent value chain, they rarely act and communicate beyond the boundaries of their subsystem. Secondly, we were able to allocate primary barriers and drivers to each of the subsystems, highlighting the need to include all three in the transformation process and aim for a comprehensive digital solution. This work explores the potential of a network-based platform to improve the current practice of rigid and strictly hierarchical value chains. We focus on deriving user requirements from the interviews to describe the necessary functionality of the platform to address the identified barriers and exploit existing drivers.