Refine
Document Type
- Conference proceeding (850) (remove)
Language
- English (850) (remove)
Is part of the Bibliography
- yes (850)
Institute
- Informatik (462)
- Technik (220)
- ESB Business School (137)
- Texoversum (21)
- Life Sciences (11)
- Zentrale Einrichtungen (2)
Publisher
- IEEE (222)
- Springer (142)
- Gesellschaft für Informatik e.V (42)
- Association for Computing Machinery (40)
- Hochschule Reutlingen (31)
- Association for Information Systems (30)
- VDE Verlag (23)
- SciTePress (21)
- IARIA (19)
- Elsevier (18)
In recent years, the demand for accurate and efficient 3D body scanning technologies has increased, driven by the growing interest in personalised textile development and health care. This position paper presents the implementation of a novel 3D body scanner that integrates multiple RGB cameras and image stitching techniques to generate detailed point clouds and 3D mesh models. Our system significantly enhances the scanning process, achieving higher resolution and fidelity while reducing the cost, time and effort required for data acquisition and processing. Furthermore, we evaluate the potential use cases and applications of our 3D body scanner, focusing on the textile technology and health sectors. In textile development, the 3D scanner contributes to bespoke clothing production, allowing designers to construct made-to-measure garments, thus minimising waste and enhancing customer satisfaction through fitting clothing. In mental health care, the 3D body scanner can be employed as a tool for body image analysis, providing valuable insights into the psychological and emotional aspects of self-perception. By exploring the synergy between the 3D body scanner and these fields, we aim to foster interdisciplinary collaborations that drive advancements in personalisation, sustainability, and well-being.
Impact of a large distribution network on radiation characteristics of planar spiral antenna arrays
(2023)
Designing antenna arrays with a central feed point has gained ground in the antenna technique. This approach, which is usually applied because of manufacturing costs, is difficult to achieve and leads to a large feeding network. The impact of which is numerically investigated in the present work. Upon comparing three different antennas, it is shown that the enlargement of the feed strongly affects the antenna's overall dimensions and the antenna's radiation characteristics. The antenna with the plug-in solution is not only small in size but also performs better compared to antennas with a central feed point. Considering the high effort in designing the feed network with a central point and the influence of the resulting enlarged network on the dimensions and radiation characteristics of the antenna, the cost saving in production can be put into perspective.
The replacement of conventional material with recyclates affects product personality, particularly regarding sustainability aspects influencing consumer behaviour. A definition of personality for products made of recyclates is missing in literature. As these products require appropriate aesthetics based on material origin to communicate the advantage concerning sustainability, there is a need for research in this regard. This paper aims to develop an adequate personality of a reusable water bottle made of ocean plastic by collecting personality traits that evoke associations related to the material's origin and sustainability. We conducted two quantitative field studies. Study 1 collected associated visual perceived attributes and context-related personality traits in order to develop and visualize a preliminary design. Study 2 evaluated the design regarding associated personality traits. The overall outcome was a product personality scale consisting of 23 items plus a concrete design recommendation for a water bottle made of recycled ocean plastic. The assessment of degree of sustainability was strongly influenced by participants’ associations with personal use, familiarity with usage and the factor of stability and resilience.
In recent years, 3D facial reconstructions from single images have garnered significant interest. Most of the approaches are based on 3D Morphable Model (3DMM) fitting to reconstruct the 3D face shape. Concurrently, the adoption of Generative Adversarial Networks (GAN) has been gaining momentum to improve the texture of reconstructed faces. In this paper, we propose a fundamentally different approach to reconstructing the 3D head shape from a single image by harnessing the power of GAN. Our method predicts three maps of normal vectors of the head’s frontal, left, and right poses. We are thus presenting a model-free method that does not require any prior knowledge of the object’s geometry to be reconstructed.
The key advantage of our proposed approach is the substantial improvement in reconstruction quality compared to existing methods, particularly in the case of facial regions that are self-occluded in the input image. Our method is not limited to 3d face reconstruction. It is generic and applicable to multiple kinds of 3D objects. To illustrate the versatility of our method, we demonstrate its efficacy in reconstructing the entire human body.
By delivering a model-free method capable of generating high-quality 3D reconstructions, this paper not only advances the field of 3D facial reconstruction but also provides a foundation for future research and applications spanning multiple object types. The implications of this work have the potential to extend far beyond facial reconstruction, paving the way for innovative solutions and discoveries in various domains.
The aim of this work is the development of artificial intelligence (AI) application to support the recruiting process that elevates the domain of human resource management by advancing its capabilities and effectiveness. This affects recruiting processes and includes solutions for active sourcing, i.e. active recruitment, pre-sorting, evaluating structured video interviews and discovering internal training potential. This work highlights four novel approaches to ethical machine learning. The first is precise machine learning for ethically relevant properties in image recognition, which focuses on accurately detecting and analysing these properties. The second is the detection of bias in training data, allowing for the identification and removal of distortions that could skew results. The third is minimising bias, which involves actively working to reduce bias in machine learning models. Finally, an unsupervised architecture is introduced that can learn fair results even without ground truth data. Together, these approaches represent important steps forward in creating ethical and unbiased machine learning systems.
The 17 SDGs, as agreed upon by the international community, are designed to be implemented across all levels of human activity. Alongside the level of international politics, this also includes the local levels, national politics, wider society, and the economic sphere. Many channels are called on to further implementation, including the transfer of technology to developing and emerging countries. As the patent holders, this must include the active participation of companies. While the literature examines the important role of technology transfer in North-South business-to-business (B2B) partnerships, studies on the technology transfer between European and African companies are scarce. Therefore, in this study we use original data from 26 interviews conducted with managers engaged in sales partnerships between German manufacturers and their distributors in African markets to examine the existence and forms of technology transfer. We find that training and marketing excellence are the predominant forms of technology transfer and based on that suggest a refinement of established frameworks on B2B technology transfer.
OpenAPI, WADL, RAML, and API Blueprint are popular formats for documenting Web APIs. Although these formats are in general both human and machine-readable, only the part of the format describing the syntax of a Web API is machine-understandable. Descriptions, which explain the meaning and purpose of Web API elements, are embedded as natural language text snippets into documents and target human readers but not machines. To enable machines to read and process these state-of-practice Web API documentation, we propose a Transformer model that solves the generic task of identifying a Web API element within a syntax structure that matches a natural language query. For our first prototype, we focus on the Web API integration task of matching output with input parameters and fined-tuned a pre-trained CodeBERT model to the downstream task of question answering with samples from 2,321 OpenAPI documentation. We formulate the original question answering problem as a multiple choice task: given a semantic natural language description of an output parameter (question) and the syntax of the input schema (paragraph), the model chooses the input parameter (answer) in the schema that best matches the description. The paper describes the data preparation, tokenization, and fine-tuning process as well as discusses possible applications of our model as part of a recommender system. Furthermore, we evaluate the generalizability and the robustness of our fine-tuned model, with the result that it achieves an accuracy of 81.46% correctly chosen parameters.
In the context of digital transformation, having a data-driven organizational culture has been recognized as an important factor for data analytics capabilities, innovativeness and competitive advantage of firms. However, the current literature on data-driven culture (DDC) is fragmented, lacking both a synthesis of findings and a theoretical foundation. Therefore, the aim of this work has been to develop a comprehensive framework for understanding DDC and the mechanisms that can be used to embed such a culture in organizations as well as structuring prior dispersed findings on the topic. Based on the foundation of organizational culture theory, we employed a Design Science Research (DSR) approach using a systematic literature review and expert interviews to build and evaluate a transformation-oriented framework. This research contributes to knowledge by synthesizing previously dispersed knowledge in a holistic framework, as well as, by providing a conceptual framework to guide the transformation towards a DDC.
Facing ever-looming climate change, studying the drivers for individuals' Information Systems (IS) Use to reduce environmental harm gains momentum. While extant research on the antecedents of sustainable IS Use has focused on specific theories, interventions, contexts, and technologies, a holistic understanding has become increasingly elusive, with a synthesis remaining absent. We employ a systematic literature review methodology to shed light on the driving antecedents for sustainable IS Use among individual consumers. Our results build on findings of 29 empirical studies drawn from 598 articles retrieved from our premier outlets and a forward/backward search. The analysis reveals six salient complementary antecedents: Relief, Empowerment, Default, User-centricity, Salience, and Encouragement. We recommend considering these concepts when developing, deploying, promoting, or regulating digital technologies to mitigate individual consumers' emissions. Along with memorable and implementable concepts, our theoretical framework offers a novel conceptualization and four promising avenues for researchers on sustainable IS Use.
The proliferation of smart technologies transforms the way individual consumers perform tasks. Considerable research alludes that smart technologies are often related to domestic energy consumption. However, it remains unclear how such technologies transform tasks and thereby impact our planet. We explore the role of technological smartness in personal day-to-day tasks that help create a more sustainable future. In the absence of theory, but facing extensive changes in everyday life enabled by smart technologies, we draw on phenomenon-based theorizing (PBT) guidelines. As anchor, we refer to task endogeneity related to task-technology fit theory (TTF). As infusion, we employ theory on public goods. Our model proposes novel relations between the concepts of smart autonomy and -transparency with sustainable task outcomes, mediated by task convenience and task significance. We discuss some implications, limitations, and future research opportunities.
We present the results of an extensive characterization of the performance and stability of a third-order continuous-time delta-sigma modulator with active coefficient error compensation. Using our previously published coefficient tuning technique, process variation induced R-C time-constant (TC) errors in the forward signal path can be compensated indirectly using continuously tunable DACs in the feedback path. To validate our technique experimentally with a range of real TC variations, we designed a modulator with discretely configurable integration capacitor arrays in a 0.35-μm CMOS process. We configured the capacitors of the fabricated device for a range of total TC variations from -28.4 % to +19.3 % and measured the signal-to-noise ratio (SNR) as a function of the input amplitude before and after compensating the variations electrically using the feedback DACs. The results show that our tuning technique is capable of restoring the desired nominal modulator performance over the entire parameter variation range, including the system’s nominal maximum stable amplitude (MSA).
The efficient production and utilization of green hydrogen is vital to succeed in the global strive for a sustainable future. To provide the necessary amount of green hydrogen a high number of electrolyzers will be connected as decentralized power consumers to the grid. A large amount of decentralized renewable power sources will provide the energy. In such a system a control method is necessary to dispatch the available power most efficiently. In particular, the shutdown of renewable energy sources due to temporary overproduction must be avoided. This paper presents a decentralized tertiary control algorithm that provides a new decentralized control approach, thus creating a flexible, robust and easily scalable system. The operation of each grid participant within this grid connected microgrid is optimized for maximum financial profit, while minimizing the exchange of power with the mains grid and reducing the shutdown of renewable power sources.
As fuel prices climb and the global automotive sector migrates to more sustainable vehicle technologies, the future of South Africa’s minibus taxis is in flux. The authors’ previous research has found that battery electric technology struggles to meet all the mobility requirements of minibus taxis. They investigate the technical feasibility of powering taxis with hydrogen fuel cells instead. The following results are projected using a custom-built simulator, and tracking data of taxis based in Stellenbosch, South Africa. Each taxi requires around 12 kg of hydrogen gas per day to travel an average distance of 360 km. 465 kWh of electricity, or 860 m2 of solar panels, would electrolyse the required green hydrogen. An economic analysis was conducted on the capital and operational expenses of a system of ten hydrogen taxis and an electrolysis plant. Such a pilot project requires a minimum investment of € 3.8 million (R 75 million), for a 20 year period. Although such a small scale roll-out is technically feasible and would meet taxis’ performance requirements, the investment cost is too high, making it financially unfeasible. They conclude that a large scale solution would need to be investigated to improve financial feasibility; however, South Africa’s limited electrical generation capacity poses a threat to its technical feasibility. The simulator is uploaded at: https://gitlab.com/eputs/ev-fleet-sim-fcv-model.
Near-Data Processing (NDP) is a key computing paradigm for reducing the ever growing time and energy costs of data transport versus computations. With their flexibility, FPGAs are an especially suitable compute element for NDP scenarios. Even more promising is the exploitation of novel and future non-volatile memory (NVM) technologies for NDP, which aim to achieve DRAM-like latencies and throughputs, while providing large capacity non-volatile storage.
Experimentation in using FPGAs in such NVM-NDP scenarios has been hindered, though, by the fact that the NVM devices/FPGA boards are still very rare and/or expensive. It thus becomes useful to emulate the access characteristics of current and future NVMs using off-the-shelf DRAMs. If such emulation is sufficiently accurate, the resulting FPGA-based NDP computing elements can be used for actual full-stack hardware/software benchmarking, e.g., when employed to accelerate a database.
For this use, we present NVMulator, an open-source easy-to-use hardware emulation module that can be seamlessly inserted between the NDP processing elements on the FPGA and a conventional DRAM-based memory system. We demonstrate that, with suitable parametrization, the emulated NVM can come very close to the performance characteristics of actual NVM technologies, specifically Intel Optane. We achieve 0.62% and 1.7% accuracy for cache line sized accesses for read and write operations, while utilizing only 0.54% of LUT logic resources on a Xilinx/AMD AU280 UltraScale+ FPGA board. We consider both file-system as well as database access patterns, examining the operation of the RocksDB database when running on real or emulated Optane-technology memories.
The performance and scalability of modern data-intensive systems are limited by massive data movement of growing datasets across the whole memory hierarchy to the CPUs. Such traditional processor-centric DBMS architectures are bandwidth- and latency-bound. Processing-in-Memory (PIM) designs seek to overcome these limitations by integrating memory and processing functionality on the same chip. PIM targets near- or in-memory data processing, leveraging the greater in-situ parallelism and bandwidth.
In this paper, we introduce pimDB and provide an initial comparison of processor-centric and PIM-DBMS approaches under different aspects, such as scalability and parallelism, cache-awareness, or PIM-specific compute/bandwidth tradeoffs. The evaluation is performed end-to-end on a real PIM hardware system from UPMEM.
The increase in distributed energy generation, such as photovoltaic systems (PV) or combined heat and power plants (CHP), poses new challenges to almost every distribution network operator (DNO). In the low-voltage (LV) grids, where installed PV capacity approaches the magnitude of household load, reverse power flow occurs at the secondary substa-tions. High PV penetration leads to voltage rise, flicker and loading problems. These problems have been addressed by the application of various techniques amongst which is the deployment of step voltage regulators (SVR). SVR can solve the voltage problem, but do not prevent or reduce reverse power flows. Therefore, the application of SVR in low voltage grids can result in significant power losses upstream. In this paper we present part of a research project investi-gating the application of remote-controlled cable cabinets (CC) with metering units in a low-voltage network as a possible alternative for SVR. A new generation of custom-made remote-control cable cabinets has been deployed and dynamic network reconfigurations (NR) have been realized with the following objectives: (i) reduction of reverse power flow through the secondary substation to the upstream network and therefore a reduction of upstream losses, (ii) reduction of the voltage rise caused by distributed energy resources and (iii) load balancing in the low-voltage grid. Secondary objec-tives are to improve the DNO's insight into the state of the network and to provide further information on future smart grid integration.
Modern wide bandgap power devices promise higher power conversion performance if the device can be operated reliably. As switching speed increases, the effects of parasitic ringing become more prominent, causing potentially damaging overvoltages during device turn-off. Estimating the expected additional voltage caused by such ringing enables more reliable designs. In this paper, we present an analytical expression to calculate the expected overvoltage caused by parasitic ringing based on parasitic element values and operating point parameters. Simulations and measurements confirm that the expression can be used to find the smallest rise time of the switches’ drain-source voltage for minimum overvoltage. The given expression also allows the prediction of the trade off overvoltage amplitude in case of faster required rise times.
The relevance of Robotic Process Automation (RPA) has increased over the last few years. Combining RPA with Artificial Intelligence (AI) can further enhance the business value of the technology. The aim of this research was to analyze applications, terminology, benefits, and challenges of combining the two technologies. A total of 60 articles were analyzed in a systematic literature review to evaluate the aforementioned areas. The results show that by adding AI, RPA applications can be used in more complex contexts, it is possible to minimize the human factor during the development process, and AI-based decision-making can be integrated into RPA routines. This paper also presents a current overview of the used terminology. Moreover, it shows that by integrating AI, some unseen challenges in RPA projects can emerge, but also a lot of new benefits will come along with it. Based on the outcome, it is concluded that the topic offers a lot of potential, but further research and development is required. The result of this study help researches to gain an overview of the state-of-the-art in combining RPA and AI.
It is widely recognized that Education for Sustainable Development (ESD) plays a critical role in creating a more sustainable world by fostering the development of the knowledge, skills, understanding, values, and actions necessary for such change (UNESCO, 2020). In this context, ESD represents a holistic approach that focuses on lifelong learning to create informed people who can make decisions today and in the future. Related to the textile and fashion industry, ESD is an appropriate approach to continuously implement sustainability aspects in education and training. To achieve this goal, the European project "Sustainable Fashion Curriculum at Textile Universities in Europe - Development, Implementation and Evaluation of a Teaching Module for Educators" (Fashion DIET) has developed a digital teaching module in a partnership between a University of Education and universities with textile departments. The main objective of the project is to elaborate an ESD module for university lecturers in order to introduce a sustainable fashion curriculum in textile universities in Europe and implement it in educational systems. The project therefore aims to train educators along the textile supply chain, to inform the young generation about the latest aspects of sustainability and raise awareness by implementing ESD in textile education. This paper presents the learning outcomes of the modules on sustainable fashion design and related production technologies developed by the technical university partners, as part of the total of 42 courses covering didactic-methodological approaches and the sustainable orientation of the fashion market, offered at the consortium level. The project content is made available as Open Educational Resources through Glocal Campus, an open-access e-learning platform that enables virtual collaboration between universities.
The presented research is dedicated to estimation of the correlation between the level of renewable energy sources and the costs of congestion management in electric networks in selected European countries. Data of six countries in North-West European area (Italy, Spain, Germany, France, Poland and Austria) were investigated. Factors considered included grid congestion costs including re-dispatching costs as well as countertrading costs, gross electricity generation, installed capacity of electric generating facilities, installed capacity of electric non-dispatchable renewable energy sources and total electricity consumption. Special attention is paid to the share of renewable energy sources. It is found that the grid congestion costs are not clearly affected by penetration of non-dispatchable renewables in all the analysed countries and therefore a clear mathematical correlation cannot no be extrapolated with the available data. The results of this research show in general a loose dependency of the grid congestion costs on the penetration of renewables and a strong dependency on the total electrical consumption of the country.
This article presents a modified method of performing power flow calculations as an alternative to pure energy-based simulations of off-grid hybrid systems. The enhancement consists in transforming the scenario-based power flow method into a discrete time-dependent algorithm with the inclusion of bus and controller dynamics.
Large critical systems, such as those created in the space domain, are usually developed by a large number of organizations and, furthermore, they have to comply with standards. Yet, the different stakeholders often do not have a common understanding of the needed quality of requirements specifications. Achieving such a common understanding is a laborious process that is currently not sufficiently supported. Moreover, such a common understanding must be aligned with the standards. In this paper, we present an approach that can be used to align the different stakeholder perceptions regarding the quality of requirements specifications. Existing quality models for requirements specifications are analyzed for equivalences, and transferred into a common representation, the so-called Aligned Quality Map (AQM). Furthermore, a process is defined that supports the alignment of different stakeholder perspectives with regard to the quality of requirements specifications using AQM, which is validated in a case study in the context of European space projects. AQM has been created and populated with an initial set of quality models. It is designed in such way that it can be extended to include further quality models. The case study has shown that an alignment of different stakeholder perspectives and the quality model of the European Cooperation for Space Standardization using AQM is feasible. The approach allows for aligning different stakeholder perspectives for a common understanding of the quality of requirements specifications in the context of standards. Furthermore, AQM supports the assessment of requirements specifications.
Software development teams have to face stress caused by deadlines, staff turnover, or individual differences in commitment, expertise, and time zones. While students are typically taught the theory of software project management, their exposure to such stress factors is usually limited. However, preparing students for the stress they will have to endure once they work in project teams is important for their own sake, as well as for the sake of team performance in the face of stress. Team performance has been linked to the diversity of software development teams, but little is known about how diversity influences the stress experienced in teams. In order to shed light on this aspect, we provided students with the opportunity to self-experience the basics of project management in self-organizing teams, and studied the impact of six diversity dimensions on team performance, coping with stressors, and positive perceived learning effects. Three controlled experiments at two universities with a total of 65 participants suggest that the social background impacts the perceived stressors the most, while age and work experience have the highest impact on perceived learnings. Most diversity dimensions have a medium correlation with the quality of work, yet no significant relation to the team performance. This lays the foundation to improve students’ training for software engineering teamwork based on their diversity-related needs and to create diversity-sensitive awareness among educators, employers and researchers.
For large-scale processes as implemented in organizations that develop software in regulated domains, comprehensive software process models are implemented, e.g., for compliance requirements. Creating and evolving such processes is demanding and requires software engineers having substantial modeling skills to create consistent and certifiable processes. While teaching process engineering to students, we observed issues in providing and explaining models. In this paper, we present an exploratory study in which we aim to shed light on the challenges students face when it comes to modeling. Our findings show that students are capable of doing basic modeling tasks, yet, fail in utilizing models correctly. We conclude that the required skills, notably abstraction and solution development, are underdeveloped due to missing practice and routine. Since modeling is key to many software engineering disciplines, we advocate for intensifying modeling activities in teaching.
The world is becoming increasingly digital. People have become used to learning and interacting with the world around them through technology, accelerated even further by the Covid-19 pandemic. This is especially relevant to the generation currently entering education systems and the workforce. Considering digital aids and methods of learning are important for future learning. The increasing online learning needs open the case for integrating digital learning aspects such as serious gaming within education and training systems. Learning factories fall amongst the education and training systems that can benefit from integration with digital learning extensions. Digital capabilities such as digital twins and models further enable the exploration of integrating digital serious games as an extension of learning factories. Since learning factories are meant for a range of different learning, training, and research purposes, such serious games need to be adaptable across stakeholder perspectives to maximize the value gained from the time and cost invested into such design and development. Research into the development of adaptive serious games for multiple stakeholder perspectives must first determine whether such development can be developed that reaches the objectives set for different included stakeholder perspectives. The purpose of this research is to investigate this at the hand of the practical development of a digital adaptive serious game for stakeholder perspectives.
Product engineering and subsequent phases of product lifecycles are predominantly managed in isolation. Companies therefore do not fully exploit potentials through using data from smart factories and product usage. The novel intelligent and integrated Product Lifecycle Management (i²PLM) describes an approach that uses these data for product engineering. This paper describes the i²PLM, shows the cause-and-effect relationships in this context and presents in detail the validation of the approach. The i²PLM is applied and validated on a smart product in an industrial research environment. Here, the subsequent generation of a smart lunchbox is developed based on production and sensor data. The results of the validation give indications for further improvements of the i²PLM. This paper describes how to integrate the i²PLM into a learning factory.
Circular economy aims to support reuse and extends the product life cycles through repair, remanufacturing, upgrades and retrofits, as well as closing material cycles through recycling. To successfully manage the necessary transformation processes to circular economy, manufacturing enterprises rely on the competency of their employees. The definition of competency requirements for circular economy-oriented production networks will contribute to the operationalization of circular economy. The International Association of Learning Factories (IALF) statesin its mission the development of learning systems addressing these challenges for training of students and further education of industry employees. To identify the required competencies for circular economy, the major changes of the product life cycle phases have been investigated based on the state of the science and compared to the socio-technical infrastructure and thematic fields of the learning factories considered in this paper. To operationalize the circular economy approach in the product design and production phase in learning factories, an approach for a cross learning factory network (so called "Cross Learning Factory Product Production System (CLFPPS)") has been developed. The proposed CLFPPS represents a network on the design dimensions of learning factories. This approach contributes to the promotion of circular economy in learning factories as it makes use of and combines the focus areas of different learning factories. This enables the CLFPPS to offer a holistic view on the product life cycle in production networks.
Development of an IoT-based inventory management solution and training module using smart bins
(2023)
Flexibility, transparency and changeability of warehouse environments are playing an increasingly important role to achieve a cost-efficient production of small batch sizes. This results in increasing requirements for warehouses in terms of flexibility, scalability, reconfigurability and transparency of material and information flows to deal with large number of different components and variable material and information flows due to small batch sizes. Therefore, an IoT-based inventory management solution and training module has been developed, implemented and validated at Werk150 – the Factory on campus of the ESB Business School. Key elements of the developed solution are smart bins using weight mats to track the bin’s content and additional sensors and buttons which are connected to an IoT – Hub to collect data of material consumption and manual handling operations. The use of weight mats for the smart bins offers the possibility to measure the container content independent of the specific component geometry and thus for a variety of components based on the specific component weights. The developed solution enables focusing on key for success elements of the system to provide synchronization of the flow of materials and information resulting an increase of flexibility and significantly higher transparency of the material flow. AIbased algorithms are applied to analyse the gathered data and to initiate process optimizations by providing the logistics decision makers a profound and transparent basis for decision making. In order to provide students and industry visitors of the learning factory with the necessary competences and to support the transfer into practice, a training module on IoT-based inventory management was developed and implemented.
Since its first publication in 2015, the learning factory morphology has been frequently used to design new learning factories and to classify existing ones. The structuring supports the concretization of ideas and promotes exchange between stakeholders.
However, since the implementation of the first learning factories, the learning factory concept has constantly evolved.
Therefore, in the Working Group "Learning Factory Design" of the International Association of Learning Factories, the existing morphology has been revised and extended based on an analysis of the trends observed in the evolution of learning factory concepts. On the one hand, new design elements were complemented to the previous seven design dimensions, and on the other hand, new design dimensions were added. The revised version of the morphology thus provides even more targeted support in the design of new learning factories in the future.
Production planning and control are characterized by unplanned events or so-called turbulences. Turbulences can be external, originating outside the company (e.g., delayed delivery by a supplier), or internal, originating within the company (e.g., failures of production and intralogistics resources). Turbulences can have far reaching consequences for companies and their customers, such as delivery delays due to process delays. For target-optimized handling of turbulences in production, forecasting methods incorporating process data in combination with the use of existing flexibility corridors of flexible production systems offer great potential. Probabilistic, data-driven forecasting methods allow determining the corresponding probabilities of potential turbulences. However, a parallel application of different forecasting methods is required to identify an appropriate one for the specific application. This requires a large database, which often is unavailable and, therefore, must be created first. A simulation-based approach to generate synthetic data is used and validated to create the necessary database of input parameters for the prediction of internal turbulences. To this end, a minimal system for conducting simulation experiments on turbulence scenarios was developed and implemented. A multi-method simulation of the minimal system synthetically generates the required process data, using agent-based modeling for the autonomously controlled system elements and event-based modeling for the stochastic turbulence events. Based on this generated synthetic data and the variation of the input parameters in the forecast, a comparative study of data-driven probabilistic forecasting methods was conducted using a data analytics tool. Forecasting methods of different types (including regression, Bayesian models, nonlinear models, decision trees, ensemble, deep learning) were analyzed in terms of prediction quality, standard deviation, and computation time. This resulted in the identification ofappropriate forecasting methods, and required input parameters for the considered turbulences.
Smart factories, driven by the integration of automation and digital technologies, have revolutionized industrial production by enhancing efficiency, productivity, and flexibility. However, the optimization and continuous improvement of these complex systems present numerous challenges, especially when real-world data collection is time-consuming, expensive, or limited. In this paper, we propose a novel method for semi-automated improvement of smart factories using synthetic data and cause-effect-relations, while incorporating the aspect of self-organization. The method leverages the power of synthetic data generation techniques to create representative datasets that mimic the behaviour of real-world manufacturing systems. These synthetic datasets serve together with the cause-and-effect relationships as a valuable resource for factory optimization, as they enable extensive experimentation and analysis without the constraints of limited or costly real-world data. Furthermore, the method embraces the concept of self organization within smart factories. By allowing the system to adapt and optimize itself based on feedback from the synthetic data, cause-effect-relationships, the factory can dynamically reconfigure and adjust its processes. To facilitate the improvement process, the method integrates the synthetic data with advanced analytics and machine learning algorithms as well as and the cause-and-effect relationships. This synergy between human expertise and technological advancements represents a compelling path towards a truly optimized smart factory of the future.
This project aims to evaluate existing big data infrastructures for their applicability in the operating room to support medical staff with context-sensitive systems. Requirements for the system design were generated. The project compares different data mining technologies, interfaces, and software system infrastructures with a focus on their usefulness in the peri-operative setting. The lambda architecture was chosen for the proposed system design, which will provide data for both postoperative analysis and real-time support during surgery.
Introduction: Even if there is a standard procedure of CI surgery, especially in pediatric surgery surgical steps often differ individually due to anatomical variations, malformations or unforseen events. This is why every surgical report should be created individually, which takes time and relies on the correct memory of the surgeon. A standardized recording of intraoperative data and subsequent storage as well as text processing would therefore be desirable and provides the basis for subsequent data processing, e.g. in the context of research or quality assurance.
Method: In cooperation with Reutlingen University, we conducted a workflow analysis of the prototype of a semi-automatic checklist tool. Based on automatically generated checklists generated from BPMN models a prototype user interface was developed for an android tablet. Functions such as uploading photos and files, manual user entries, the interception of foreseeable deviations from the normal course of operations and the automatic creation of OP documentation could be implemented. The system was tested in a remote usability test on a petrous bone model.
Result: The user interface allows a simple intuitive handling, which can be well implemented in the intraoperative setting. Clinical data as well as surgical steps could be individually recorded and saved via DICOM. An automatic surgery report could be created and saved.
Summary: The use of a dynamic checklist tool facilitates the capture, storage and processing of surgical data. Further applications in clinical practice are pending.
Governments and public institutions increasingly embrace digital opportunities to involve citizens in public issues and decision making. While public participation is generally seen as an important and promising venture, the design of the participation processes and the utilized digital infrastructure poses challenges, especially to the public sector. Instead of limiting conceptual guidance and exchange to one domain, we therefore develop a taxonomy for digital involvement projects that unites the domains of e-participation, citizen science and crowd-X. Embedded in a design science research approach, we follow an iterative design process to elaborate the key characteristics of a digital involvement project based on the participation process, its individuals and digital infrastructure. Through evaluating the artifact in a focus group with domain practitioners, we find support for the usefulness of our taxonomy and its ability to provide guidance and a basis for discussion of digital involvement projects across domains.
Global, competitive markets which are characterised by mass customisation and rapidly changing customer requirements force major changes in production styles and the configuration of manufacturing systems. As a result, factories may need to be regularly adapted and optimised to meet short-term requirements. One way to optimise the production process is the adaptation of the plant layout to the current or expected order situation. To determine whether a layout change is reasonable, a model of the current layout is needed. It is used to perform simulations and in the case of a layout change it serves as a basis for the reconfiguration process. To aid the selection of possible measurement systems, a requirements analysis was done to identify the important parameters for the creation of a digital shadow of a plant layout. Based on these parameters, a method is proposed for defining limit values and specifying exclusion criteria. The paper thus contributes to the development and application of systems that enable an automatic synchronisation of the real layout with the digital layout.
We propose a novel technique to compensate the effects of R-C / gm-C time-constant (TC) errors due to process variation in continuous-time delta-sigma modulators. Local TC error compensation factors are shifted around in the modulator loop to positions where they can be implemented efficiently with tunable circuit structures, such as current-steering digital-to-analog converters (DAC). This approach constitutes an alternative or supplement to existing compensation techniques, including capacitor or gm tuning. We apply the proposed technique to a third-order, single-bit, low-pass continuous-time delta-sigma modulator in cascaded integrator feedback structure. A feedback path tuning scheme is derived analytically and confirmed numerically using behavioral simulations. The modulator circuit was implemented in a 0.35-μm CMOS process using an active feedback coefficient tuning structure based on current-steering DACs. Post-layout simulations show that with this tuning structure, constant performance and stable operation can be obtained over a wide range of TC variation.
For collision and obstacle avoidance as well as trajectory planning, robots usually generate and use a simple 2D costmap without any semantic information about the detected obstacles. Thus a robot’s path planning will simply adhere to an arbitrarily large safety margin around obstacles. A more optimal approach is to adjust this safety margin according to the class of an obstacle. For class prediction, an image processing convolutional neural network can be trained. One of the problems in the development and training of any neural network is the creation of a training dataset. The first part of this work describes methods and free open source software, allowing a fast generation of annotated datasets. Our pipeline can be applied to various objects and environment settings and is extremely easy to use to anyone for synthesising training data from 3D source data. We create a fully synthetic industrial environment dataset with 10 k physically-based rendered images and annotations. Our da taset and sources are publicly available at https://github.com/LJMP/synthetic-industrial-dataset. Subsequently, we train a convolutional neural network with our dataset for costmap safety class prediction. We analyse different class combinations and show that learning the safety classes end-to-end directly with a small dataset, instead of using a class lookup table, improves the quantity and precision of the predictions.
The blockchain technology represents a decentralized database that stores information securely in immutable data blocks. Regarding supply chain management, these characteristics offer potentials in increasing supply chain transparency, visibility, automation, and efficiency. In this context, first token-based mapping approaches exist to transfer certain manufacturing processes to the blockchain, such as the creation or assembly of parts as well as their transfer of ownership. However, the decentralized and immutable structure of blockchain technology also creates challenges when applying these token-based approaches to dynamic manufacturing processes. As a first step, this paper investigates existing mapping approaches and exemplifies weaknesses regarding their suitability for products with changeable configurations. Secondly, a concept is proposed to overcome these weaknesses by introducing logically coupled tokens embedded into a flexible smart contract structure. Finally, a concept for a token-based architecture is introduced to map manufacturing processes of products with changeable configurations.
Evaluation of human-robot order picking systems considering the evolution of object detection
(2022)
The automation of intralogistic processes is a major trend, but order picking, one of the core and most cost-intensive tasks in this field, remains mostly manual due to the flexibility required during picking. Reacting to its hard physical and ergonomic strain, the automation of this process is however highly relevant. Robotic picking system would enable the automation of this process from a technical point of view, but the necessity for the system to evolve in time, due to dynamics of logistic environments, faces operations with new challenges that are hardly treated in literature. This unknown scares potential investors, hindering the application of technically feasible solutions. In this paper, a model for the evaluation of the additional cost of training of automated systems during operations is presented, that also considers the savings enabled by the system after its evolution. The proposed approach, that considers different parameters such as capacity, ergonomics and cost, is validated with a case study and discussed.
According to several surveys and statistics, the great majority of companies previously not accustomed to automation are piloting solutions to automate business processes. Those accustomed to automation also attempt to introduce more of it, focusing on automation-unfriendly processes that remained manual. However, when the decision on what and whether to automate is not trivial for evident reasons, even industry leaders may get stuck on an overwhelming question: where to begin automating? The question remains too often unanswered as state-of-the-art methods fail to consider the whole picture. This paper introduces a holistic approach to the decision-making for investments in automation. The method supports the iterative analysis and evaluation of operative processes, providing tools for a quantitative approach to the decision-making. Thanks to the method, a large pool of processes can be first considered and then filtered out in order to select the one that yields the best value for the automation in the specific context. After introducing the method, a case study is reported for validation before the discussion.
Compared to the automotive sector, where automation is the rule, in many other less standardized sectors automation is still the exception. This could soon hurt the productivity of industrialized countries, where the unemployment is low and the population is aging. Phenomena like the recent downfall in productivity, due to lockdowns and social distancing for prevention of health hazards during the COVID19 pandemic, only add to the problem. For these reasons, the relevance, motivation and intention for more automation in less standardized sectors has probably never been higher. However, available statistics say that providers and users of technologies struggle to bring more automation into action in automation-unfriendly sectors. In this paper, we present a decision support method for investment in automation that tackles the problem: the STIC analysis. The method takes a holistic and quantitative approach tying together technological, context-related and economic input parameters and synthetizing them in a final economic indicator. Thanks to the modelling of such parameters, it is possible to gain sensibility on the technological and/or process adjustments that would have the highest impact on the efficiency of the automation, thereby delivering value for both technology users and technology providers.
Motivation: Aim of this project is the automatic classification of total hip endoprosthesis (THEP) components in 2D Xray images. Revision surgeries of total hip arthroplasty (THA) are common procedures in orthopedics and trauma surgery. Currently, around 400.000 procedures per year are performed in the United States (US) alone. To achieve the best possible result, preoperative planning is crucial. Especially if parts of the current THEP system are to be retained.
Methods: First, a ground truth based on 76 X-ray images was created: We used an image processing pipeline consisting of a segmentation step performed by a convolutional neural network and a classification step performed by a support vector machine (SVM). In total, 11 classes (5 pans and 6 shafts) shall be classified.
Results: The ground truth generated was of good quality even though the initial segmentation was performed by technicians. The best segmentation results were achieved using a U-net architecture. For classification, SVM architectures performed much better than additional neural networks.
Conclusions: The overall image processing pipeline performed well, but the ground truth needs to be extended to include a broader variability of implant types and more examples per training class.
Recognition of sleep and wake states is one of the relevant parts of sleep analysis. Performing this measurement in a contactless way increases comfort for the users. We present an approach evaluating only movement and respiratory signals to achieve recognition, which can be measured non-obtrusively. The algorithm is based on multinomial logistic regression and analyses features extracted out of mentioned above signals. These features were identified and developed after performing fundamental research on characteristics of vital signals during sleep. The achieved accuracy of 87% with the Cohen’s kappa of 0.40 demonstrates the appropriateness of a chosen method and encourages continuing research on this topic.
The vast majority of state-of-the-art integrated circuits are mixed-signal chips. While the design of the digital parts of the ICs is highly automated, the design of the analog circuitry is largely done manually; it is very time-consuming; and prone to error. Among the reasons generally listed for this is often the attitude of the analog designer. The fact is that many analog designers are convinced that human experience and intuition are needed for good analog design. This is why they distrust the automated synthesis tools. This observation is quite correct, but this is only a symptom of the real problem. This paper shows that this phenomenon is caused by very concrete technical (and thus very rational) issues. These issues lie in the mode of operation of the typical optimization processes employed for the synthesizing tasks. I will show that the dilemma that arises in analog design with these optimizers is the root cause of the low level of automation in analog design. The paper concludes with a review of proposals for automating analog design
Blockchain is a technology for the secure processing and verification of data transactions based on a distributed peer-to-peer network that uses cryptographic processes, consensus algorithms, and backward-linked blocks to make transactions virtually immutable. Within supply chain management, blockchain technology offer potentials in increasing supply chain transparency, visibility, automation, and efficiency. However, its complexity requires future employees to have comprehensive knowledge regarding the functionality of blockchain-based applications in order to be able to apply their benefits to scenarios in supply chain and production. Learning factories represent a suitable environment allowing learners to experience new technologies and to apply them to virtual and physical processes throughout value chains. This paper presents a concept to practically transfer knowledge about the technical functionality of blockchain technology to future engineers and software developers working within supply chains and production operations to sensitize them regarding the advantages of decentralized applications. First, the concept proposes methods to playfully convey immutable backward-linked blocks and the embedment of blockchain smart contracts. Subsequently, the students use this knowledge to develop blockchain-based application scenarios by means of an exemplary product in a learning factory environment. Finally, the developed solutions are implemented with the help of a prototypical decentralized application, which enables a holistic mapping of supply chain events.
This article explores the question of how sustainability and labour law are interrelated. The modern world of work is characterised by the growing social and environmental responsibility of companies. Especially in the post-COVID era, sustainability also plays an increasingly important role in the corporate context, which is also noticeable in the so-called ‘war for talent’. Achieving personal career goals is no longer enough for employees today. Corporate values and in particular the so-called ESG criteria (Environment, Social, Governance) are thus also becoming increasingly important in the employment relationship and in corporate reporting requirements. In terms of social sustainability, labour law instruments can, for example, promote the creation of a discrimination-free working environment, the introduction of flexible working time models or the protection of whistleblowers. From an ecological perspective, labour regulations are also suitable for implementing ‘green mobility’ and other measures to reduce companies’ ecological footprints. Working from home, which experienced a huge boom during the COVID-19 pandemic, is also sustainable, especially from an ecological point of view. Appropriate consideration of these sustainable work tools in future corporate social responsibility (CSR) strategies not only creates a competitive advantage but can also be beneficial in recruitment.
Physicians in interventional radiology are exposed to high physical stress. To avoid negative long-term effects resulting from unergonomic working conditions, we demonstrated the feasibility of a system that gives feedback about unergonomic
situations arising during the intervention based on the Azure Kinect camera. The overall feasibility of the approach could be shown.
Current data-intensive systems suffer from scalability as they transfer massive amounts of data to the host DBMS to process it there. Novel near-data processing (NDP) DBMS architectures and smart storage can provably reduce the impact of raw data movement. However, transferring the result-set of an NDP operation may increase the data movement, and thus, the performance overhead. In this paper, we introduce a set of in-situ NDP result-set management techniques, such as spilling, materialization, and reuse. Our evaluation indicates a performance improvement of 1.13 × to 400 ×.
For a long time, most discrete accelerators have been attached to host systems using various generations of the PCI Express interface. However, with its lack of support for coherency between accelerator and host caches, fine-grained interactions require frequent cache-flushes, or even the use of inefficient uncached memory regions. The Cache Coherent Interconnect for Accelerators (CCIX) was the first multi-vendor standard for enabling cache-coherent host-accelerator attachments, and already is indicative of the capabilities of upcoming standards such as Compute Express Link (CXL). In our work, we compare and contrast the use of CCIX with PCIe when interfacing an ARM-based host with two generations of CCIX-enabled FPGAs. We provide both low-level throughput and latency measurements for accesses and address translation, as well as examine an application-level use-case of using CCIX for fine-grained synchronization in an FPGA-accelerated database system. We can show that especially smaller reads from the FPGA to the host can benefit from CCIX by having roughly 33% shorter latency than PCIe. Small writes to the host have a latency roughly 32% higher than PCIe, though, since they carry a higher coherency overhead. For the database use-case, the use of CCIX allowed to maintain a constant synchronization latency even with heavy host-FPGA parallelism.
Even though near-data processing (NDP) can provably reduce data transfers and increase performance, current NDP is solely utilized in read-only settings. Slow or tedious to implement synchronization and invalidation mechanisms between host and smart storage make NDP support for data-intensive update operations difficult. In this paper, we introduce a low-latency cache-coherent shared lock table for update NDP settings in disaggregated memory environments. It utilizes the novel CCIX interconnect technology and is integrated in neoDBMS, a near-data processing DBMS for smart storage. Our evaluation indicates end-to-end lock latencies of ∼80-100ns and robust performance under contention.