Refine
Document Type
- Book chapter (71)
- Journal article (68)
- Book (35)
- Conference proceeding (24)
- Report (11)
- Anthology (4)
- Doctoral Thesis (3)
- Working Paper (3)
- Patent / Standard / Guidelines (1)
Is part of the Bibliography
- yes (220)
Institute
- Texoversum (220) (remove)
Publisher
- Springer (50)
- Hochschule Reutlingen (22)
- Books on Demand (13)
- Deutscher Fachverlag (13)
- Deutsches Textilforschungszentrum Nord-West (10)
- MDPI (9)
- Elsevier (7)
- dfv Mediengruppe (7)
- IBP, Internat. Business Press Publ. (4)
- Hometrica Consulting (3)
Flame-retardant finishing of cotton fabrics using DOPO functionalized alkoxy- and amido alkoxysilane
(2023)
In the present study, DOPO-based alkoxysilane (DOPO-ETES) and amido alkoxysilane (DOPO-AmdPTES) were synthesized by one-step and without by-products as halogen-free flame retardants. The flame retardants were applied on cotton fabric utilizing sol–gel method and pad-dry-cure finishing process. The flame retardancy, the thermal stability and the combustion ehaviour of treated cotton were evaluated by surface and bottom edge ignition flame test (according to EN ISO 15025), thermogravimetric analysis (TGA) and micro-scale combustion calorimeter (MCC). Unlike CO/DOPO-ETES sample, cotton treated with DOPO-AmdPTES nanosols exhibits self-extinguishing ehaviour with high char residue, an improvement of the LOI value and a significant reduction of the PHRR, HRC and THR compared to pristine cotton. Cotton finished with DOPO-AmdPTES reveals a semi-durability after ten laundering cycles keeping the flame-retardant properties unchanged. According to the results obtained from TGA-FTIR, Py-GC/MS and XPS, the major activity of flame retardant occurs in the condensed phase via catalytic induced char formation as physical barrier along with the activity in the gas phase derived mainly from the dilution effect. The early degradation of CO/DOPO-AmdPTES compared to CO/DOPO-ETES, triggered by the cleavage of the weak bond between P and C=O, as the DFT study indicated, provides the beneficial effect of this flame retardant on the fire resistance of cellulose.
Polyester fibers are widely employed in a multitude of sectors and applications from the technical textiles to everyday life thanks to their durability, strength, and flexibility. Despite these advantages, polyester lacks in dyeability, adhesion of coating, hydrophilicity, and it is characterized by a low wettability respect to natural fibers. On this regard, beyond the harmful hydrophobic textile finishings of polyester fabrics containing fluorine-compounds, and in order to avoid pre-treatments, such as laser irradiation to improve their surface properties, research is moving towards the development of fluorine-free and safer coatings. In this work, the (3-glycidyloxypropyl)trimethoxysilane (GPTMS) and various long alkyl-chain alkoxysilanes were employed for the fabrication in the presence of a catalyst of a water-based superhydrophobic finishing for polyester fabrics with a simple sol-gel, non-fluorinated, sustainable approach and the dip-pad-dry-cure method. The finished polyester fabrics surface properties were investigated by static and dynamic water repellency tests. Additionally, the resistance to common water-based liquids, abrasion resistance, moisture adsorption, and air permeability measurements were performed. Scanning electron microscopy was employed to examine the micro- and nano-morphology of the functionalized polyester fabrics surfaces. The obtained superhydrophobic finishings displayed high water-based stain resistance as well as good hydrophobicity after different cycles of abrasion.
The replacement of conventional material with recyclates affects product personality, particularly regarding sustainability aspects influencing consumer behaviour. A definition of personality for products made of recyclates is missing in literature. As these products require appropriate aesthetics based on material origin to communicate the advantage concerning sustainability, there is a need for research in this regard. This paper aims to develop an adequate personality of a reusable water bottle made of ocean plastic by collecting personality traits that evoke associations related to the material's origin and sustainability. We conducted two quantitative field studies. Study 1 collected associated visual perceived attributes and context-related personality traits in order to develop and visualize a preliminary design. Study 2 evaluated the design regarding associated personality traits. The overall outcome was a product personality scale consisting of 23 items plus a concrete design recommendation for a water bottle made of recycled ocean plastic. The assessment of degree of sustainability was strongly influenced by participants’ associations with personal use, familiarity with usage and the factor of stability and resilience.
Purpose
The purpose of this paper is to explore why men do not rent luxury fashion to explain why the demand for luxury fashion rental services for men is so low and to contribute to science by collecting high-quality data for the research fields gender differences in barriers to renting fashion, barriers to participating in renting luxury fashion in general and to increase the amount of data on men consumption behavior in the field of fashion and luxury fashion research. Furthermore, this study aims not only to make a theoretical contribution, but also to provide practical implications for the luxury fashion rental industry.
Design/methodology/approach
To answer the research question, qualitative semi-structured interviews with seven men were conducted, who are interested in fashion and spend at least 10% of their monthly net income on luxury fashion per month. Through a deductively-inductively category-based qualitative content analysis of the interviews supported by the software MAXQDA, not only were the reasons found why many men refuse to rent luxury fashion, but also characteristics were discovered that make luxury fashion rental services more attractive to men, as well as two fashion segments and a product category in which men can imagine renting fashion or luxury fashion under certain circumstances.
Findings
Men reject the concept of renting primarily because of the nonexistence of ownership, which has to do with loss of emotional value, loss of functional value, fear of social rejection, and identity concerns; other reasons include lack of individualism, lack of habit and their own subjective standards. Except for two outliers, the remaining men surveyed could imagine using a luxury rental service under certain conditions. The most frequently mentioned features were omnichannel approach, transparency of the entire rental process provided by reviews and feedback about both the borrower and the lender, information about the cleaning process, and proof of authenticity. Also mentioned was the maintenance of exclusivity and the fact that rental services should be offered directly by the company. In the convenience category, the purchase option and insurance were mentioned most often. In addition, some men could imagine renting event-related clothing, very trendy and expensive luxury clothing, and luxury watches. However, none of the respondents would give up owning clothes and primarily use the LFRS.
Value/Practical Implications
So that marketers do not have to go through trial and error to figure out which of these characteristics works best for which male target group, the work developed five types that can be targeted with selected characteristics and their marketing, and thus perhaps persuaded to participate in the LFRS. The social type needs the feature of maintenance of exclusivity, the emotional type needs the purchase option and an omnichannel experience, the flexibility type needs the same day delivery and free exchange possibilities, the cost-benefit type needs analytical tools to maximize his rental income or to calculate whether it is cheaper to buy or rent this particular item for this particular period of time, the rule-governed type needs an added value in addition to renting such as a top service.
Der pH-Wert der menschlichen Haut liegt nicht im neutralen Bereich, sondern ist mit Werten von 3,5-6 – je nach Körperstelle – leicht Sauer. Das bietet der Kommensalen Hautflora einen geeigneten Lebensraum, wirkt jedoch abtötend auf einige pathogene Mikroorganismen und inaktivierend auf einige Viren. Dieser Säureschutzmantel der Haut stellt somit eine erste äußere Schutzschicht vor dem Befall von Krankheitserregern dar. Ein entsprechender Oberflächen-pH-Wert auf Textilien kann dazu beitragen, die Übertragung von Krankheitserregern durch die Kleidung von Mitarbeitern im Gesundheitswesen zu minimieren und gleichzeitig keinen negativen Einfluss auf die hauteigene Flora auszuüben. Zudem kann die Besiedlung von z.B. Bettwäsche durch pathogene Mikroorganismen vermindert werden. Einen positiven Einfluss kann dies zudem auf die bakterienassoziierte Geruchsbildung auf Funktionskleidung haben.
It is widely recognized that Education for Sustainable Development (ESD) plays a critical role in creating a more sustainable world by fostering the development of the knowledge, skills, understanding, values, and actions necessary for such change (UNESCO, 2020). In this context, ESD represents a holistic approach that focuses on lifelong learning to create informed people who can make decisions today and in the future. Related to the textile and fashion industry, ESD is an appropriate approach to continuously implement sustainability aspects in education and training. To achieve this goal, the European project "Sustainable Fashion Curriculum at Textile Universities in Europe - Development, Implementation and Evaluation of a Teaching Module for Educators" (Fashion DIET) has developed a digital teaching module in a partnership between a University of Education and universities with textile departments. The main objective of the project is to elaborate an ESD module for university lecturers in order to introduce a sustainable fashion curriculum in textile universities in Europe and implement it in educational systems. The project therefore aims to train educators along the textile supply chain, to inform the young generation about the latest aspects of sustainability and raise awareness by implementing ESD in textile education. This paper presents the learning outcomes of the modules on sustainable fashion design and related production technologies developed by the technical university partners, as part of the total of 42 courses covering didactic-methodological approaches and the sustainable orientation of the fashion market, offered at the consortium level. The project content is made available as Open Educational Resources through Glocal Campus, an open-access e-learning platform that enables virtual collaboration between universities.
Mode & Musik
(2023)
Dieses Buch wird das Verständnis der Leser für die Verbindungen zwischen der Musik- und der Modeindustrie erweitern. Es hebt die Herausforderungen hervor, denen sich die Modeindustrie derzeit in Bezug auf den Hyperwettbewerb, die Definition immer schnellerer Trends, sich ändernde Verbraucherwünsche usw. gegenübersieht. Die Modeindustrie wird in der Tat stark von der digitalen Revolution in der Musikindustrie beeinflusst, die das Gesicht des individuellen Musikkonsums und des sozialen Bezugs verändert hat und sich daher auch auf den Modekonsum und den sozialen Bezug auswirkt. Dieses Verständnis ist von entscheidender Bedeutung, um die Strategien eines Modeunternehmens auf die Anforderungen der modernen Modekonsumenten auszurichten.
The pH value of the human skin is not in the neutral range but is slightly acidic with values of – depending on the body part – 3.5 to 6. This provides a suitable habitat for the commensal skin floral but has a killing effect on some pathogenic micro-organisms and an inactivating effect on some viruses. This protective acid mantle of the skin thus represents a first external protective layer against infestation by pathogens. An appropriate surface pH on textiles can help to minimize the transmission of pathogens through the clothing of healthcare workers while at the same time not exerting a negative influence on the skin’s own flora. In addition, the colonization of e.g. bed linen by pathogenic microorganisms can be reduced. This can also have a positive influence on bacteria-associated odor formation on functional clothing.
Patterns are virtually simulated in 3D CAD programs before production to check the fit. However, achieving lifelike representations of human avatars, especially regarding soft tissue dynamics, remains challenging. This is mainly since conventional avatars in garment CAD programs are simulated with a continuous hard surface and not corresponding to the human physical and mechanical body properties of soft tissue. In the real world, the human body’s natural shape is affected by the contact pressure of tight-fitting textiles. To verify the fit of a simulated garment, the interactions between the individual body shape and the garment must be considered. This paper introduces an innovative approach to digitising the softness of human tissue using 4D scanning technology. The primary objective of this research is to explore the interactions between tissue softness and different compression levels of apparel, exerting pressure on the tissue to capture the changes in the natural shape. Therefore, to generate data and model an avatar with soft body physics, it is essential to capture the deform ability and elasticity of the soft tissue and map it into the modification options for a simulation. To aim this, various methods from different fields were researched and compared to evaluate 4D scanning as the most suitable method for capturing tissue deformability in vivo. In particular, it should be considered that the human body has different deformation capabilities depending on age, the amount of muscle and body fat. In addition, different tissue zones have different mechanical properties, so it is essential to identify and classify them to back up these properties for the simulation. It has been shown that by digitising the obtained data of the different defined applied pressure levels, a prediction of the deformation of the tissue of the exact person becomes possible. As technology advances and data sets grow, this approach has the potential to reshape how we verify fit digitally with soft avatars and leverage their realistic soft tissue properties for various practical purposes.
Naturfasern dienen der Menschheit seit Urzeiten als wichtiger Rohstoff für viele Gegenstände des täglichen Lebens, sei es als Kleidung, als technische Textilprodukte oder, im Falle von Cellulosefasern, als Ballaststoffe bei unserer Ernährung. Waren die allerersten Gebrauchstextilien unserer Vorfahren noch hauptsächlich tierischen Ursprungs in Form von Fellen und Pelzen, so wurden zunehmend die Pflanzenfasern als Ressource für vielfältige Anwendungen entdeckt. Dem Beispiel der Natur folgend, fanden die unterschiedlichen Faserarten Anwendung entsprechend ihres natürlichen Bestimmungszwecks bzw. entsprechend ihrer morphologischen und technologischen Eigenschaften. So wurde und wird z.B. Wolle aufgrund ihrer flexiblen, isolierenden und wärmenden Eigenschaften hauptsächlich als Kleidung und als Kälteschutz eingesetzt, während sich die steifen, glatten und festen Bastfasern wie Flachs oder Hanf, sich eher als Seile, Netze oder auch als Bogensehnen eigneten.
Thin, flat textile roofing offers negligible heat insulation. In warm areas, such roofing membranes are therefore equipped with metallized surfaces to reflect solar heat radiation, thus reducing the warming inside a textile building. Heat reflection effects achieved by metallic coatings are always accompanied by shading effects as the metals are non-transparent for visible light (VIS). Transparent conductive oxides (TCOs) are transparent for VIS and are able to reflect heat radiation in the infrared. TCOs are, e.g., widely used in the display industry. To achieve the perfect coatings needed for electronic devices, these are commonly applied using costly vacuum processes at high temperatures. Vacuum processes, on account of the high costs involved and high processing temperatures, are obstructive for an application involving textiles. Accepting that heat-reflecting textile membranes demand less perfect coatings, a wet chemical approach has been followed here when producing transparent heat-reflecting coatings. Commercially available TCOs were employed as colloidal dispersions or nanopowders to prepare sol-gel-based coating systems. Such coatings were applied to textile membranes as used for architectural textiles using simple coating techniques and at moderate curing temperatures not exceeding 130 °C. The coatings achieved about 90% transmission in the VIS spectrum and reduced near-infrared transmission (at about 2.5 µm) to nearly zero while reflecting up to 25% of that radiation. Up to 35% reflection has been realized in the far infrared, and emissivity values down to ε = 0.5777 have been measured.
Der pH-Wert der menschlichen Haut liegt nicht im neutralen Bereich, sondern ist mit Werten von 3,5-6 – je nach Körperstelle – leicht Sauer. Das bietet der Kommensalen Hautflora einen geeigneten Lebensraum, wirkt jedoch abtötend auf einige pathogene Mikroorganismen und inaktivierend auf einige Viren. Dieser Säureschutzmantel der Haut stellt somit eine erste äußere Schutzschicht vor dem Befall von Krankheitserregern dar. Ein entsprechender Oberflächen-pH-Wert auf Textilien kann dazu beitragen, die Übertragung von Krankheitserregern durch die Kleidung von Mitarbeitern im Gesundheitswesen zu minimieren und gleichzeitig keinen negativen Einfluss auf die hauteigene Flora auszuüben. Zudem kann die Besiedlung von z.B. Bettwäsche durch pathogene Mikroorganismen vermindert werden. Einen positiven Einfluss kann dies zudem auf die bakterienassoziierte Geruchsbildung auf Funktionskleidung haben.
In recent years, the demand for accurate and efficient 3D body scanning technologies has increased, driven by the growing interest in personalised textile development and health care. This position paper presents the implementation of a novel 3D body scanner that integrates multiple RGB cameras and image stitching techniques to generate detailed point clouds and 3D mesh models. Our system significantly enhances the scanning process, achieving higher resolution and fidelity while reducing the cost, time and effort required for data acquisition and processing. Furthermore, we evaluate the potential use cases and applications of our 3D body scanner, focusing on the textile technology and health sectors. In textile development, the 3D scanner contributes to bespoke clothing production, allowing designers to construct made-to-measure garments, thus minimising waste and enhancing customer satisfaction through fitting clothing. In mental health care, the 3D body scanner can be employed as a tool for body image analysis, providing valuable insights into the psychological and emotional aspects of self-perception. By exploring the synergy between the 3D body scanner and these fields, we aim to foster interdisciplinary collaborations that drive advancements in personalisation, sustainability, and well-being.
The pH value of the human skin is not in the neutral range but is slightly acidic with values of – depending on the body part – 3.5 to 6. This provides a suitable habitat for the commensal skin floral but has a killing effect on some pathogenic micro-organisms and an inactivating effect on some viruses. This protective acid mantle of the skin thus represents a first external protective layer against infestation by pathogens. An appropriate surface pH on textiles can help to minimize the transmission of pathogens through the clothing of healthcare workers while at the same time not exerting a negative influence on the skin’s own flora. In addition, the colonization of e.g. bed linen by pathogenic microorganisms can be reduced. This can also have a positive influence on bacteria-associated odor formation on functional clothing.
Das Ziel dieses Papiers ist es zu verstehen, inwieweit Musik und Mode voneinander abhängig und miteinander interagieren, wobei der Schwerpunkt auf der Entwicklung von Musik- und Modetrends im Zeitraum von 1950 bis heute liegt. Darüber hinaus soll dem Leser ein Einblick darin ermöglicht werden, ob die zur Verfügung stehende Technologie die Entwicklung und den Zugang zu Musik und Mode in Zukunft beeinflusst. Die Recherche für dieses Papier erforderte die Verwendung von Sekundärquellen, einschließlich Bibliotheks- und Online-Recherchen. Das Ziel war es, Informationen über die frühere und aktuelle Entwicklung von Musik und Mode zu sammeln. Diese Methoden waren die besten Alternativen zu Sekundärquellen, da sie zuverlässige Ergebnisse lieferten und so die Genauigkeit der gesammelten Daten erhöhten. Sie waren jedoch auch begrenzt, da vor allem Daten für die Mode- und Musikentwicklung der Nullerjahre begrenzt waren. Dies ist durch das Hauptergebnis erklärbar, dass die Entwicklung dieser Zeit nicht so deutlich ist wie die der früheren Zeiten, in denen ein Modetrend mit einem neuen Musikgenre oder Hit einherging, was bedeutet, dass Mode und Musik in gewissem Maße korrelieren, aber durch eine Reaktivierung der Musik- und Modetrends der Vorjahre ohne neue Erfindungen gekennzeichnet ist.
Cotton contamination by honeydew is considered one of the significant problems for quality in textiles as it causes stickiness during manufacturing. Therefore, millions of dollars in losses are attributed to honeydew contamination each year. This work presents the use of UV hyperspectral imaging (225–300 nm) to characterize honeydew contamination on raw cotton samples. As reference samples, cotton samples were soaked in solutions containing sugar and proteins at different concentrations to mimic honeydew. Multivariate techniques such as a principal component analysis (PCA) and partial least squares regression (PLS-R) were used to predict and classify the amount of honeydew at each pixel of a hyperspectral image of raw cotton samples. The results show that the PCA model was able to differentiate cotton samples based on their sugar concentrations. The first two principal components (PCs) explain nearly 91.0% of the total variance. A PLS-R model was built, showing a performance with a coefficient of determination for the validation (R2cv) = 0.91 and root mean square error of cross-validation (RMSECV) = 0.036 g. This PLS-R model was able to predict the honeydew content in grams on raw cotton samples for each pixel. In conclusion, UV hyperspectral imaging, in combination with multivariate data analysis, shows high potential for quality control in textiles.
The requirements for textiles differ greatly depending on the area of application, whereby it often does not remain with only one required functionality. For example, in the field of functional clothing or protective clothing/PPE, it is necessary to protect the textile’s wearers from UV radiation. At the same time, self-cleaning effects offer certain advantages in that field. In addition, an antimicrobial effect in functional clothing can reduce the formation of unpleasant odors, and in PPE – especially in the healthcare sector – can contribute to the interruption of the chain of infection. One way to achieve these 3 desired functions in just one finishing step is to immobilize titanium dioxide (TiO2). However, TiO2 is viewed critically for application in the textile sector due to a REACH listing. Another disadvantage is that it only takes effect under UV radiation and is therefore not suitable for indoor use. Alternatively, photocatalysts such as doped zinc oxides (ZnO) can be used, which also exhibit catalytic activity through activation by visible light, which can lead to the killing of microorganisms and the degradation of organic soiling.
Schweißerschutzkleidung muss unterschiedlichen Anforderungen genügen. Sie muss u.a. flammfest sein, den Schweißer vor Metallspritzern schützen, die beim Schweißen entstehen, und auch einen Schutz vor UV-Licht sicherstellen, das im Schweißbogen entsteht. Besonders der Schutz vor Metallspritzern wird durch das Flächengewicht der Textilien bestimmt. Der entsprechende Schutzfaktor wird durch Tropfen flüssigen Eisens bestimmt, die auf ein Gewebe fallen. Dabei gilt: je höher das Flächengewicht, desto höher der Schutz vor Schweißspritzern. Jedoch gilt auch: je höher das Flächengewicht, desto schlechter ist der Tragekomfort und desto wärmender ist die Kleidung und damit die körperliche Belastung des Trägers. Durch die Applikation von Nanopartikeln ist es möglich, das benötigte Flächengewicht der Kleidung zu reduzieren.
Schweißerschutzkleidung muss unterschiedlichen Anforderungen genügen. Sie muss u.a. flammfest sein, den Schweißer vor Metallspritzern schützen, die beim Schweißen entstehen, und auch einen Schutz vor UV-Licht sicherstellen, das im Schweißbogen entsteht. Besonders der Schutz vor Metallspritzern wird durch das Flächengewicht der Textilien bestimmt. Der entsprechende Schutzfaktor wird durch Tropfen flüssigen Eisens bestimmt, die auf ein Gewebe fallen. Dabei gilt: je höher das Flächengewicht, desto höher der Schutz vor Schweißspritzern. Jedoch gilt auch: je höher das Flächengewicht, desto schlechter ist der Tragekomfort und desto wärmender ist die Kleidung und damit die körperliche Belastung des Trägers. Durch die Applikation von Nanopartikeln ist es möglich, das benötigte Flächengewicht der Kleidung zu reduzieren.
A premise guaranteeing the successful interdisciplinary teamwork in product design is a mutual understanding of both professional and academic communities of the different design expertise and the role they play in the process. It appears that the open compound word industrial design is open to interpretation in European education. This ambiguity had a negative impact on the labour policies of some European countries, which have labelled some professions with incorrect names. Therefore, this terminological inconsistency urges for clarification within the design community. This work analyses the term industrial design, it presents historical developments in European industrial design education, in particular in Germany and in the Netherlands, and discusses how the education to the industrial design profession was positioned towards product development. This paper suggests that the causes for the observed lack of clarity about the meaning of the term industrial design are of an etymological and disciplinary kind. In order to act as a bridge between the professional and academic communities, universities should create the premises for interdisciplinary collaboration between designers and engineers through standardized communication, ultimately contributing for a sustainable future in both design and engineering education.
For a holistic assessment of the interaction between the human body and tight fitted clothing, it is necessary to consider the mechanical properties of the body. Default avatars in CAD software are usually solid and do not take this interaction into account. For this purpose, a solid avatar is converted to a deformable one by using the soft body physics implementation in the simulation program Blender. The fit of a 3D garment on both avatars are compared, which allows a first evaluation of the differences between these approaches.
When wearing compressive garments, the tissue of the human body is altered in relation to its natural shape by the properties of the applied material and by the pattern construction used.
To check the fit of garments, both construction and selected materials can be virtually simulated in 3D on avatars in corresponding CAD programs before fabrication.
The software Blender allows the modelling of an avatar and to generate in respective to the different tissue zones with their specific properties to adjust them with soft body physics according to the testing of real soft tissue but the models in Blender are mainly using linear springs.
Protective welding clothing must meet various requirements. Among other things, it must be flame-resistant, protect against splashes of metal or sparks and also ensure protection against radiant heat and UV light caused by exposure to the welding arc. The protection against molten metal splashes is directly related to the fabric weight per unit area of the protective welding clothing and the level of protection is normally determined by the number of molten metal droplets that fall on the fabric. The higher the weight per unit area, the greater the protection against welding spatter. However, increasing the fabric weight per unit area also leads to psychologically uncomfortable wearing and thus increasing the physical strain on the wearer. The required basis weight per unit area of protective welding clothing can be reduced by applying nanoparticles as a protective layer while preserving other indispensable properties.
Protective welding clothing must meet various requirements. Among other things, it must be flame-resistant, protect against splashes of metal or sparks and also ensure protection against radiant heat and UV light caused by exposure to the welding arc. The protection against molten metal splashes is directly related to the fabric weight per unit area of the protective welding clothing and the level of protection is normally determined by the number of molten metal droplets that fall on the fabric. The higher the weight per unit area, the greater the protection against welding spatter. However, increasing the fabric weight per unit area also leads to psychologically uncomfortable wearing and thus increasing the physical strain on the wearer. The required basis weight per unit area of protective welding clothing can be reduced by applying nanoparticles as a protective layer while preserving other indispensable properties.
The textile-finishing industry, is one of the main sources of persistent organic pollutants in water; in this regard, it is necessary to develop and employ new sustainable approaches for fabric finishing and treatment. This research study shows the development of an efficient and eco-friendly procedure to form highly hydrophobic surfaces on cotton fabrics using different modified silica sols. In particular, the formation of highly hydrophobic surfaces on cotton fabrics was studied by using a two-step treatment procedure, i.e., first applying a hybrid silica sol obtained by hydrolysis and subsequent condensation of (3-Glycidyloxypropyl) trimethoxy silane with different alkyl(trialkoxy) silane under acid conditions, and then applying hydrolyzed hexadecyltrimethoxysilane on the treated fabrics to further improve the fabrics’ hydrophobicity. The treated cotton fabrics showed excellent water repellency with a water contact angle above 150◦ under optimum treatment conditions. The cooperative action of rough surface structure due to the silica sol nanoparticles and the low surface energy caused by long-chain alkyl(trialkoxy)silane in the nanocomposite coating, combined with the expected roughness on microscale due to the fabrics and fiber structure, provided the treated cotton fabrics with excellent, almost super, hydrophobicity and water-based stain resistance in an eco-sustainable way.
Das Lieferkettensorgfaltspflichtengesetz (LkSG) wurde verabschiedet, um die nachhaltige Bewirtschaftung internationaler Lieferketten und globaler Wertschöpfungsnetzwerke zu regeln. Hieraus stellen sich die Fragen, wie sich das LkSG auf die nachhaltige Bewirtschaftung von Lieferketten auswirken wird und mit welchen Handlungsansätzen die betroffenen Unternehmen dem LkSG entsprechen können. I.R.e. empirisch-qualitativen Forschungsarbeit liefert der Beitrag erste Antworten auf diese Fragen und gibt Handlungsempfehlungen für die Unternehmenspraxis.
(57) Zusammenfassung: Die Erfindung betrifft ein Verfahren zur konstruktionslosen Schnittgestaltung für wenigstens ein Bekleidungsstück (250) einer Bekleidungskollektion, wobei ein Modellkörper verwendet wird, auf dem wenigstens ein Markierungspunkt (203) und/oder wenigstens eine Schnittlinie (202) vorhanden ist oder angebracht wird, wobei von dem Modellkörper durch Oberflächenabrollen Schnittteile (204) erhalten werden, wobei als Modellkörper ein Optimalkörper (200) verwendet wird, der eine Soll-Innenkontur (212) eines herzustellenden Bekleidungsstückes (250) repräsentiert. Die Erfindung betrifft ferner den Optimalkörper (200) sowie einen 3D-Datensatz des Optimalkörpers (200) sowie ein Verfahren zum Erzeugen des Optimalkörpers (200).
Die Anforderungen an Textilien unterscheiden sich je nach Anwendungsbereich stark, wobei es häufig nicht bei nur einer benötigten Funktionalität bleibt. Im Bereich der Funktions- oder Schutzkleidung bzw. PSA ist es z.B. nötig, die Träger der Kleidung vor UV-Strahlung zu schützen. Gleichzeitig bieten hier selbstreinigende Effekte gewisse Vorteile. Zudem kann eine antimikrobielle Wirkung im Bereich der Funktionskleidung die Bildung unangenehmer Gerüche vermindern, sowie im Bereich der PSA – besonders im Gesundheitswesen – zur Unterbrechung von Infektionsketten beitragen. Eine Möglichkeit, diese 3 gewünschten Funktionen in nur einem Ausrüstungsschritt zu erzielen, ist die Immobilisierung von Titandioxid (TiO2). Dieses wird aber aufgrund einer REACH-Listung kritisch für die Anwendung im textilen Sektor gesehen. Nachteilig ist zudem, dass es seine Wirkung nur unter UV-Einstrahlung entfaltet und damit nicht für den Innenbereich geeignet ist. Alternativ können Photokatalysatoren wie dotierte Zinkoxide (ZnO) verwendet werden, die auch durch Einstrahlung im Bereich des sichtbaren Lichts eine katalytische Aktivität aufweisen, die zur Abtötung von Mikroorganismen und zum Abbau organischer Verschmutzungen führen kann.
Säureschutzmantel - Ausrüstung zum Schutz gegen mikrobiellen Befall - (DTNW Mitteilung Nr. 129)
(2022)
Ziel des Forschungsvorhabens war es, den Effekt des Säureschutzmantels der menschlichen Haut auf der textilen Oberfläche unter der Verwendung von Säurekatalyten nachzuahmen, um so neuartige, antibakterielle Textilien zu entwickeln. Hierzu sollten für die Textilindustrie wässrige Ausrüstungen entwickelt werden, die über konventionelle Veredlungstechniken wie das Foulardieren appliziert werden können. Die Aktivität der Ausrüstung sollte im feuchten Millieu gegeben sein, um einen Effekt beim Tragen von z.B. Funktionskleidung oder Arbeitskleidung im medizinischen Bereich zu gewährleisten.
Für die Erfüllung der Projektziele wurden verschiedene kommerzielle Polyoxometallate verwendet. Zudem wurden Polyoxometallate synthetisiert und funktionalisiert. Diese führen im wässrigen Millieu eine saure Katalyse durch und kommen als industrielle Katalysatoren an Membranen gebunden zum Einsatz. Ein Aktivitätsscreening geeigneter Kandidaten zeigte, dass eine wässrige Applikation möglich ist und zu einer antibakteriellen Aktivität der ausgerüsteten Textilien führt.
Die Polyoxometallate konnten durch das Sol-Gel-Verfahren mittels Tetraethoxysilan durch Foulardierverfahren im Labormaßstab an verschiedenen Textilien immobilisiert werden. Eine Hochskalierung auf den Technikumsmaßstab gelang ebenfalls. Das Aktivitätsscreening der Ausrüstungen zeigte, dass ein saurer Oberflächen-pH-Wert von ≤ 4 durch die entwickelte Ausrüstung möglich ist und zu einem antibakteriellen Effekt führt. Die Abrasionsbeständigkeit war gegeben. Nach Waschversuchen verloren die Ausrüstungen zum Teil ihren antibakteriellen Effekt.
Insgesamt ergab sich ein Einblick in den Nutzen von Polyoxometallaten als katalytisch aktive Substanz, die zur Ausrüstung von Textilien geeignet ist. Da die in diesem Forschungsvorhaben synthetisierten Polyoxometallate keine genotoxische und mutagene Aktivität aufweisen, können die KMU des textilveredelnden Wirtschaftszweigs eine neue Art der antibakteriellen Ausrüstung anwenden. Um eine Waschstabile Ausrüstung zu erzielen, müssen die Funktionalisierungen und darüber die Bindung der Polyoxometallate an die Ausrüstungsmatrix jedoch weiterentwickelt werden.
Die Ziele des Forschungsvorhabens wurden erreicht.
The strong demand for a transformation of the textile and fashion industry towards sustainability requires a continuous implementation of the guiding principle of Education for Sustainable Development (ESD) in education and industry [1, 2]. In a first step of the European research project "Sustainable fashion curriculum at textile Universities in Europe - Development, Implementation and Evaluation of a Teaching Module for Educators" (Fashion DIET) a continuing education module shall be created to implement ESD as a guiding principle in university teaching. The research-based teaching and learning materials are delivered through an e-learning portal.
Im IGF-Projekt Nr. 19617 N wurden stickstoff- und phosphorsubstituierte Alkoxysilane hergestellt und ihre flammhemmenden Eigenschaften für Textilien untersucht. Die Synthesen erfolgten nach unterschiedlichen Strategien wie der Klick-Chemie und der nukleophilen Substitution kommerziell erhältlicher Organophosphorverbindungen mit aminobasierten Trialkoxysilanen und/oder Cyanurchlorid. Diese neuartigen, halogen- und aldehydfreien Flammschutzmittel wurden auf Stoffe aus Baumwolle (BW), Polyethylenterephthalat (PET), Polyamid (PA), sowie Mischgeweben daraus mit der industriell etablierten Pad-Dry-Cure-Technik und mittels Sol-Gel-Verfahren aufgetragen. Die flammhemmenden Eigenschaften wurden mit den Prüfverfahren nach EN ISO 15025 (Schutzkleidung – Schutz gegen Hitze und Flammprüfverfahren für begrenzte Flammenausbreitung= bewertet. Eine gute Schwerentflammbarkeit der hybriden organisch-anorganischen Materialien wurde bei einer geringen Menge von 3-5 Gew.% auf Baumwollgeweben erreicht. Darüber hinaus konnten die Wasserlöslichkeit und die Waschbeständigkeit durch die an das Phosphoratom gebundenen funktionellen Gruppen und durch die Optimierung der Härtungstemperatur kontrolliert werden. Insgesamt zeigte das Forschungsprojekt, dass N-P-Silane sehr gute permanente Flammschutzmittel für Textilien sind.
Nanocoatings based on sol–gel coatings are presented as suitable tool to modify materials based on polymers. The main focus is set onto textiles as the most common polymer materials. It presents which types of functionalization can be reached by modified sol–gel processes. Also a suitable categorization of functions is given and set into relation to common applications. A special focus is set on the functional properties, antimicrobial, UV protective, and flame retardant. The concept of bifunctional coatings is discussed and especially the combination of water-repellent and antistatic is presented.
Der betriebswirtschaftlichen Forschung in der Textil- und Bekleidungsindustrie gelingt es nicht, Lösungen zu erarbeiten, die das Nachhaltigkeitsproblem der Branche lösen. Dies liegt primär an der Art und Weise, wie in unserem Fachbereich geforscht wird. In Anbetracht der Problemstellung kann der starke Fokus auf empirische Arbeiten nur eine begrenzte Hilfestellung leisten. Denn empirische Forschung erfolgt innerhalb der bestehenden Denkmuster und ist tendenziell gegenwarts- oder vergangenheitsorientiert. Für die Lösung zukunftsorientierter Fragestellungen werden jedoch völlig neue Parameter und Logiken benötigt. Ein Umdenken ist gefragt.
In the IGF project No. 19617 N, nitrogen and phosphorous substituted alkoxysilanes were prepared and their ability to inhibit fire growth and spread for fabrics was explored. To this end, a series of flame retardants were synthesized using different strategies including click chemistry and nucleophilic substitution of commercial organophosphorus compounds with amino-based trialkoxysilanes and/or cyanuric chloride. The new halogen-free and aldehyde-free flame retardants were applied to different fabrics such as cotton (CO), polyethylene terephthalate (PET), polyamide (PA) and their blends using the well-known pad-dry-cure technique and sol-gel method. The flame-retarding efficiencies were evaluated by EN ISO 15025 test methods (protective clothing-protection against heat and flame method of test for limited flame spread). Good flame retardancy of the hybrid organic-inorganic materials was achieved with the addition of as small amount as 3-5 wt.% for cotton fabrics. Moreover, the water solubility and the washing resistance could be controlled through the functional groups attached to the phosphor atom or through the optimization of the curing temperature. Overall, the research project demonstrated that N-P-silanes are very good permanent flame retardants for textiles.
Automotive technology is in a state of upheaval. IN the field of human machine interface (HMI), the increasing interaction between vehicles, users, and the Internet results in an increment of controls needed, which ultimately has a negative impact on usability and overall car weight. An interdisciplinary team of researchers has been developing for the past two years more intuitive and lighter in-car user interfaces through smart textiles at Reutlingen University. With the newly developed operating and feedback properties, a 1:1 demonstrator was realized and then integrated into a car driving simulator.
Das vorliegende Taschenbuch fasst die bekannten Berechnungsformeln und Erkenntnisse aus der betrieblichen Praxis und aus wissenschaftlichen Untersuchungen im Bereich des Weberei-Vorwerks und der Weberei zusammen. Die bei der Gewebeherstellung notwendigen Entscheidungsprozesse sollen damit erleichtert werden.
Mit dieser Formelsammlung lassen sich jedoch nicht nur die optimalen Fertigungsvorschriften für Gewebe praxisgerecht erstellen, sondern auch die wichtigsten technischen und physikalischen Grundlagen des Fabrikbetriebs werden in der gebotenen Kürze dargestellt.
Energy consumption by air-conditioning is expansive and leads to the emission of millions of tons of CO2 every year. A promising approach to circumvent this problem is the reflection of solar radiation: Rooms that would not heat up by irradiation will not need to be cooled down. Especially, transparent conductive metal oxides exhibit high infrared (IR) reflectivity and are commonly applied as low-emissivity coatings (low-e coatings). Indium tin oxide (ITO) coatings are the state-of-the-art application, though indium is a rare and expensive resource. This work demonstrates that aluminum-doped zinc oxide (AZO) can be a suitable alternative to ITO for IR-reflection applications. AZO synthesized here exhibits better emissivity to be used as roofing membrane coatings for buildings in comparison to commercially available ITO coatings. AZO particles forming the reflective coating are generated via solvothermal synthesis routes and obtain high conductivity and IR reflectivity without the need of any further post-thermal treatment. Different synthesis parameters were studied, and their effects on both conductive and optical properties of the AZO nanoparticles were evaluated. To this end, a series of characterization methods, especially 27Al-nuclear magnetic resonance spectroscopy (27Al-NMR) analysis, have been conducted for a deeper insight into the particles’ structure to understand the differences in conductivity and optical properties. The optimized AZO nanoparticles were coated on flexible transparent textile-based roofing membranes and tested as low-e coatings. The membranes demonstrated higher thermal reflectance compared with commercial ITO materials with an emissivity value lowered by 16%.
The strong demand to transform the textile and fashion industry towards sustainability requires continuous implementation of the Education for Sustainable Development (ESD) mission statement in education and industry. To achieve this goal, the European research project "Fashion DIET - Sustainable Fashion Curriculum at Textile Universities in Europe. Development, Implementation and Evaluation of a Teaching Module for Educators", co-funded by the Erasmus+ programme of the European Union (2020-1-DE01-KA203-005657), aims to create an ESD module for university lecturers and research-based teaching and learning materials delivered through an e-learning portal. First, an online questionnaire was rolled out to assess university faculty attitudes toward and needs for ESD content and methods. The feedback questionnaire enabled the selection of the most relevant data for the elaboration of an action and research-oriented professional development module for ESD in textile education, which will be accessible through an information & e-learning portal. The e-learning portal can be used as a web-based tool to apply and evaluate the project outcomes, e.g. the further education module and the teaching and learning materials for educators, such as manuals, broadcasts and the provision of interactive and physical materials. It thus ensures that the teaching materials can be used sustainably in the classroom. It also provides country-specific data for the fashion and textile industry and its market, taking into account the different perspectives of universities and schools. In any case, the portal represents (1) the web-based platform to support the dissemination of ESD as a guiding principle and (2) a central contact point for the target group to obtain relevant information on ESD. Fashion DIET explores the use of e-learning to improve teaching and learning on ESD, by training educators and empowering them as multipliers for a sustainable textile and fashion industry. At a higher level, the European project strengthens the quality and relevance of learning provision in education towards the latest developments in textile research and innovation in terms of a more sustainable fashion.
This paper explores why and how dominant international social standards used in the fashion industry are prone to implementation failures. A qualitative multiple-case study method was conducted, using purposive sampling to select 13 apparel supply chain actors. Data were collected through on-site semi-structured face-to-face interviews. The findings of the study are interpreted by using core tenets of agency theory. The case study findings clearly highlight why and how multi-tier apparel supply chains fail to implement social standards effectively. As a consequence of substantial goal conflicts and information asymmetries, sourcing agents and suppliers are driven to perform opportunistic behaviors in form of hidden characteristics, hidden intentions, and hidden actions, which significantly harm social standards. Fashion retailers need to empower their corporate social responsibility (CSR) departments by awarding an integrative role to sourcing decisions. Moreover, accurate calculation of orders, risk sharing, cost sharing, price premiums, and especially guaranteed order continuity for social compliance are critical to reduce opportunistic behaviors upstream of the supply chain. The development of social standards is highly suggested, e.g., by including novel metrics such as the assessment of buying practices or the evaluation of capacity planning at factories and the strict inclusion of subcontractors’ social performances. This paper presents evidence from multiple Vietnamese and Indonesian cases involving sourcing agents as well as Tier 1 and Tier 2 suppliers on a highly sensitive topic. With the development of the conceptual framework and the formulation of seven related novel propositions, this paper unveils the ineffectiveness of social standards, offers guidance for practitioners, and contributes to the neglected social dimension in sustainable supply chain management research and accountability literature.
Ziel des Forschungsvorhabens war es, unter Verwendung von photokatalytisch aktiven Zinkoxid- und/oder Titandioxid-Partikeln Kombinationsausrüstungen für die Textilindustrie zu entwickeln, welche einen hohen UV-Schutz (UPF-Wert: 50+), eine hohe antimikrobielle Wirksamkeit und selbsteinigende Eigenschaften garantieren, um so neue hygienischere Textilien zu schaffen. Hierzu sollten wässrige Ausrüstungen entwickelt werden, die über konventionelle Veredlungstechniken – „pad-dry-cure“ – appliziert werden können. Die Aktivität der Partikel sollte unter Einstrahlung von Raumlicht gegeben sein. Daher sollten die Partikel so modifiziert werden, dass ihre Absorption im Wellenlängenbereich des sichtbaren Lichtes liegt.
Für die Erfüllung der Projektziele wurden verschiedene dotierte TiO2- und ZnO-Nanopartikel synthetisiert, die durch das Einbringen von Dotanden eine Verschiebung der Absorption elektromagnetischer Strahlung erfahren haben. Ein Aktivitätsscreening geeigneter Kandidaten zeigte, dass einige einen Abbau organischer Referenzmaterialien katalysierten und eine antibakterielle Aktivität vorwiesen. Eisendotiertes Zinkoxid (Fe-ZnO) vereinte die beiden gewünschten Eigenschaften in ausreichendem Maße und verfügte zudem über eine hohe Absorption von UV-Strahlung, sodass damit auch das dritte Projektziel - ein ausreichender UV-Schutz - erreicht werden konnte.
Die wiederholte Synthese von Fe-ZnO gelang im Labormaßstab. Die Partikel konnten durch das Sol-Gel-Verfahren mittels anorganischem Tetraethoxysilan, sowie über einen organischen Polyurethanbasierten Binder durch Foulardierverfahren an verschiedenen Textilien immobilisiert werden. Die Waschstabilität war gegeben und eine Photodegradation des Binders und der Textilien konnte zumindest für das TEOS-System ausgeschlossen werden. Das Aktivitätsscreening der ausgerüsteten Textilien zeigte, dass immobilisierte Nanopartikel zwar zum Erreichen der anvisierten
Projektziele genügen, jedoch konnte die Aktivität des als Referenz verwendeten TiO2 nicht übertroffen werden.
Insgesamt ergab sich ein Einblick in den Nutzen von Nanopartikeln als katalytisch aktive Substanz, die zur Ausrüstung von Textilien geeignet ist. Um eine genügende Aktivität im sichtbaren Wellenlängenbereich zu erzielen und damit einen Nutzen für eine Innenraumanwendung zu generieren, müssen jedoch deutlich besser die Grundlagen der Dotierung und ihre Auswirkung auf die ROS-Generierung verstanden werden.
Die Ziele des Forschungsvorhabens wurden zum Teil erreicht.
Das textile Bauen ist ein seit vielen Jahren wachsender Bereich der Textilindustrie. Durch die Verwendung textiler Materialien bieten sich nicht zuletzt für die Architektur neue gestalterische Möglichkeiten, die mit konventionellen Baumaterialien nicht realisierbar sind. Bekannte Beispiele für textile Bauwerke sind große Sportarenen, Bahnhöfe und Flughäfen. Dabei sind Leichtbauweisen und zumindest teilweise Transparenz der Bauwerke auf einer Seite herausragende Eigenschaften, auf der anderen Seite stellen diese Gebäude besondere Anforderungen an das Klima- und Energiemanagement. Der Innenraum kann sich bei Sonneneinstrahlung stark aufheizen, da neben dem sichtbaren Licht vor allem ein Großteil des Infrarotanteils der solaren Strahlung transmittieren kann. Im konventionellen Bauen existieren bereits hohe Anforderungen an die energietechnische Ausgestaltung von Bauwerken, die u.a. über eine effiziente Wärmedämmung erfüllt werden. Dies wird in der Regel mit Hilfe von voluminösen, offenporigen Dämmstoffen erreicht. Ziel ist es dabei vornehmlich, den Verlust von Wärme aus dem Innenraum zu verringern, gleichzeitig können schlecht wärmeleitende Stoffe bei hoher Masse und hoher spezifischer Wärmekapazität Temperaturspitzen im Sommer abpuffern. Auch für das textile Bauen ist die Energieeffizienz ein wichtiger Aspekt. Die Verwendung von schweren Dämmstoffen widerspricht dabei aber der Idee der flexiblen textilen Leichtbauweise.
Ziel des Projekts ist es, die Schutzwirkung von Schweißerschutzkleidung zu verbessern. Der Fokus lag dabei auf den Fragestellungen: Kann man durch eine Ausrüstung die Beständigkeit der Textilien gegen Tropfen von flüssigem Metall erhöhen und gleichzeitig einen besseren UV-Schutz erhalten? Diese Schutzfaktoren von Schweißerschutzkleidung hängen stark vom Flächengewicht des verwendeten Textils ab. Je höher das Flächengewicht, desto beständiger ist die Kleidung gegenüber Metallspritzern und desto weniger UV wird durch die Kleidung hindurchgelassen. Jedoch gilt, je höher das Flächengewicht, desto schlechter ist der Tragekomfort, da ein hohes Flächengewicht u.a. das Schwitzen fördert. Schweißerschutzkleidung wird nach zwei Klassen unterteilt. Im Fall von Kleidung der Klasse 1 darf ein Temperaturanstieg von 40 K auf der Rückseite des Textils erst nach dem 15. aufgetroffenen Tropfen flüssigen Eisens auftreten. Im Fall der Klasse 2 darf der Temperaturanstieg erst nach 25 Tropfen auftreten. Als Ausgang für dieses Projekt wurden Gewebe ausgewählt, welche die Klasse 1 erfüllen. Es wurde versucht, diese Gewebe durch die Ausrüstung entweder mit wärmeleitfähigen Kompositen oder durch eine Nanostrukturierung ("Lotuseffekt") entsprechend auszurüsten, so dass die Anforderungen für Klasse 2 erfüllt werden. Wärmeleitfähige Komposite sollten für die Ausrüstung ein schnelles Ableiten und Verteilen der Wärme der Metalltropfen auf der Oberfläche garantieren, wodurch sichergestellt werden sollte, dass die Erwärmung der Rückseite des Gewebes deutlich verlangsamt wird. Mit dieser Ausrüstung konnte die Klasse 2 nicht erreicht werden, sie führte jedoch zu keiner Verschlechterung des Tragekomforts des leichteren Gewebes, und die Transmission von schädlicher UV-Strahlung wurde verringert. Durch eine Nanostrukturierung sollte ein "Lotuseffekt" für kleine Metalltropfen erzielt werden. Durch die Nanostrukturierung trifft der Metalltropfen zuerst auf die Oberfläche der Nanopartikel auf, wobei isolierende Luft zwischen Metalltropfen und Gewebeoberfläche eingeschlossen wird und so das Gewebe vor dem Tropfen selbst schützt. Dieser Ansatz lässt vermuten, dass sich der Effekt gut über die aufgetragenen Menge Nanopartikel / Binder einstellen lässt. Im Fall von Binderkonzentrationen zwischen 1,25 und 2,5 % wird die Flexibilität nur geringfügig beeinträchtigt, wobei mit unterschiedlichen Partikeln (SiO2, ZnO, AlOx und TiO2) die Schweißerschutzklasse 2 erreicht werden kann. Der Tragekomfort der Gewebe wird nicht beeinflusst. Das Verfahren bietet KMU aus dem Bereich der Textilveredlung neue innovative Produkte für den Arbeitsschutzsektor. Die Verwendung von leichterer Kleidung im Bereich der PSA (Persönliche Schutzausrüstung) erhöht die Akzeptanz dieser, da der Tragekomfort im Vergleich zu Schweißerschutzkleidung der Klasse 2 durch das im Projekt entwickelte Verfahren der Nanostrukturierung von Kleidung der Schweißerschutzklasse 1 einen deutlich verbesserten Tragekomfort mit sich bringt. Dadurch können von KMU, welche sich auf den Sektor PSA spezialisiert haben, neue und auch internationale Absatzmärkte eröffnet werden.
Sol-Gel basierte Flammschutzmittel stellen einen vielversprechenden Ansatz für Textilien dar, gerade im Bereich des Ersatzes von derzeit etablierten halogenhaltigen Flammschutzmitteln. Letztere sind aufgrund ihrer toxikologisch Bedenklichkeit sowie ihrer mitunter bioakkumulierenden Eigenschaften in die Kritik geraten. In diesem Forschungsvorhaben wurde daher untersucht auf welche Weise ein Flammschutz per Sol-Gel-Ansatz auf Stickstoff- und/oder Phosphorbasis als halogenfreie Alternative verwirklicht werden kann. Die Sol-Gel-Schicht fungierte dabei zum einen als nicht brennbarer Binder, zum anderen konnten über das Einführen entsprechender funktioneller Seitenketten für den Flammschutz aktive Gruppen direkt mit eingebunden werden. Verschiedene Ansätze wurden dabei verfolgt. Vor allem durch die Nutzung von additivierten Systemen, d.h. durch Sol-Gel-Schichten mit Zusätzen von stickstoff- und/oder phosphorhaltigen Verbindungen konnte ein Flammschutz nach DIN EN ISO 15025 (Schutzkleidung – Schutz gegen Hitze und Flammen) erhalten werden. Anhand eines Modellsystems, bei dem in zwei aufeinanderfolgenden Schritten zuerst eine funktionalisierte Sol-Gel-Schicht und anschließend eine Phosphorverbindung in einem zweiten Schritt aufgebracht wurde, konnten die Vorteile des Flammschutzes auf Sol-Gel-Basis nachgewiesen werden. Dabei wurde unter anderem auch gezeigt, dass ein Mechanismus auf Basis der Bildung einer Schutzschicht hauptsächlich verantwortlich für den Flammschutz ist. Dieses Ergebnis ist für eine zukünftige, weitere Optimierung entsprechender Ausrüstungen nicht zu unterschätzen. Durch Ausrüstungsversuche im semi-industriellen Maßstab konnte weiterhin gezeigt werden, dass einer großtechnischen Umsetzung der angewandten Ausrüstungen prinzipiell nichts im Wege steht. Abstriche müssen bis dato lediglich bezüglich der Waschstabilität gemacht werden. Die Sol-Gel-Schichten überstanden zwar im allgemeinen typische Waschprozesse, eine Permanenz der Flammfestigkeit von additivierten Systemen ergab sich aber nur in einzelnen Fällen. Ausgehend von den Ergebnissen wurde ein neuer Ansatz vorgestellt, der über den hier zugrundeliegenden Ansatz hinausgeht. Dieser sieht vor, durch den Einsatz von neu-synthetisierten Silanen mit Stickstoff- und Phosphorgruppen Sol-Gel-Schichten herzustellen, die ein vielversprechendes Verhalten zeigen. Hier konnte auch nach ersten Waschtests eine Aufrechterhaltung der verbesserten Flammfestigkeit nachgewiesen werden. Insgesamt konnte innerhalb des Forschungsvorhabens gezeigt werden, dass ein Flammschutz auf Sol-Gel-Basis für Textilien erhalten werden kann. Darüberhinaus konnte auch erklärt werden auf welchem Mechanismus dieser Flammschutz begründet ist und wie die derzeit noch ungenügende Waschpermanenz verbessert werden kann.
Instagram fashion videos
(2020)
Instagram is one of the most used social media platforms to share photos and videos. Due to this, it can be seen as a helpful opportunity for companies to use the platform as a marketing tool in order to spread information to a wide range of potential customers. Ever since its launch, Instagram is strongly connected to fashion, which makes the platform in particular interesting for fashion brands. According to the screened literature, most brands use Instagram for marketing purposes. It is furthermore a matter of fact, that the utilization of videos plays a decisive role. Following up on this, the question about how brands use videos on Instagram for marketing purposes comes up. Due to this, this chapter aims to investigate the extent to which brands make use of videos on Instagram, what the goals of the videos are and what the most effective videos in terms of user engagement are. More specifically, this chapter includes an empirical study which examines the Instagram profiles of nine selected brands of the categories lifestyle, luxury and fashion and sportswear on the underlying research question. A subsequent evaluation and discussion of the results depicts differences and similarities within the categories and between the categories. All in all, the results of the study show that fashion brands use the possibility of films as a marketing tool on Instagram. The content and types of films thereby heavily depend on the brand category.
This chapter looks at the usage of image films produced by brands and their dealing with themselves. It focuses on analyzing important film parameters, the content and the way it can influence brand image. A list of 70 fashion brands from different categories was gathered through a survey and confirmed by comparing the results with relevant literature. All 70 brands were looked at to find relevant self-referencing films. The films had to be produced by the brand themselves. Videos for advertisement or promoting collections are not regarded either. In total 22 films from 17 brands were analyzed. Results show that most brands seem to have recognized videos as a powerful marketing tool in the social media age. Many brands seem to struggle with the compliance of certain parameters such as length and the use of the brand logo. In general, the content of the videos is focused around the four topics recruitment, value, history and behind the brand. As for the intent, the videos can be classified into the three categories learning, emotion and doing something. This paper not only analyzes this special film category, but also gives recommendations to improve the videos.
Hip-hop culture defines itself through four central pillars: DJing, MCing, breakdancing and graffiti, but a fifth one, fashion, may be in the coming. Hip-hop has become the most popular music genre, and the influence it has on society is undebatable. But as hip-hop artists increasingly underpin their music with visual components, like music videos, the question arises if that has an influence on the fashion industry. This chapter clarifies which factors may determine a fashion business impact and discusses differences between mainstream hip-hop artists and the ones that are active in the fashion industry as well. The focus lays on the way and amount fashion is presented in the music videos. 24 music videos were analyzed, thereof 15 popular records from the past three years and nine of artists that are already considered as fashion influential. Additionally, a fashion influence index was created to compare the degree of fashion between the music videos. Numbers of styles, recognized brands, fashion related song verses, fashion related description box mentions and articles about the fashion in the music video were noted. Findings reveal that the number of outfits shown in the video did not have a direct link to the amount of traffic it produces in fashion media. The artists that are considered influential in the fashion industry, name brands in their song lyrics more often and show brand logos more frequent in their music videos than others. Though over the observed years, for the mainstream hip-hop artists, a rise in fashion awareness can be seen through a higher number of styles, recognizable brands and fashion related verses in the lyrics.
Fashion show films
(2020)
Due to technological developments, fashion show films provide fashion brands the opportunity to communicate their brand concepts, to attract attention and to gain more brand awareness by publishing them in the Internet. The purpose of this research paper is to investigate how fashion brands communicate their brand concept and personality through fashion show films. For this purpose, ten fashion show films of brands from the categories luxury, premium, high-street and active wear are investigated. The results indicate that the investigated brands use different ways to attract attention and to communicate their brand concept and personality. The design of the setting, the presentation of the collection as well as the visualization of the brand concept through the brand name, logo, colors or symbols and camera work play an important role to create an effective and exciting fashion show film in order to communicate the brand concept and to promote their brand image. Mostly luxury and premium brands use fashion show films for branding. For high-street and active wear brands the analysis indicates less importance of fashion show films. The limitations of this research are related to the fact that the restricted number of ten fashion show films is analyzed. This gives an overview but cannot provide a comprehensive breakdown of this topic.
An event film is a successful marketing and communication instrument, which can be used from companies along social media. By reaching the target group and potential customers, companies could benefit from increasing brand awareness. It is striking that there is a lack of information about how event films are used in regard to showing fashion. To establish the subject further, the purpose of this paper is to enrich the existing findings and analyze the influence event films have. In an empirical study, the performance of two events and the two related fast fashion retailers H&M and Zara on Instagram and YouTube regarding event and fashion connected films is analyzed. Identified stylistic elements of event fashion are searched and found in their online shops. Since emotions are especially well transferred through event films, there is an indication that they contribute to the shaping of fashion trends.
The purpose of this paper is to investigate how motion pictures are currently used for the product presentation of fashion articles. An explorative approach was chosen for the literature section. This study shows that the use of moving images for the presentation of fashion articles in online shops is possible in numerous different ways. In order to be able to use product presentation videos meaningfully, one should consider exactly what is the purpose of these videos. Different goals require different means. However, retailers should obtain enough information in advance to assess whether they can afford the production and post-processing of these videos.