Refine
Document Type
- Conference proceeding (222)
- Journal article (30)
Language
- English (252)
Is part of the Bibliography
- yes (252)
Institute
- Technik (141)
- Informatik (90)
- ESB Business School (19)
- Life Sciences (1)
- Texoversum (1)
Publisher
- IEEE (252) (remove)
Boost converters suffer from a bandwidth limitation caused by the right-half plane zero (RHPZ), which occurs in the control-to-output transfer function. In contrast, there are many applications that require superior dynamic behavior. Further, size and cost of boost converter systems can be minimized by reduced voltage deviations and fast transient responses in case of large signal load transients. The key idea of the proposed ΔV/Δt-intervention control concept is to adapt the controller output to its new steady state value immediately after a load transient by prediction from known parameters. The concept is implemented in a digital control circuit, consisting of an ASIC in a 110 nm-technology and a Xilinx Spartan-6 field programmable gate array (FPGA). In a boost converter with 3.5V input voltage, 6.3V output voltage, 1.2A load, and 500 kHz switching frequency, the output voltage deviations are 2.8x smaller, scaling down the output capacitor value by the same factor. The recovery times are 2.4x shorter in case of large signal load transients with the proposed concept. The control is widely applicable, as it supports constant switching frequencies and allows for duty cycle and inductor current limitations. It also shows various advantages compared to conventional control and to selected adaptive control concepts.
This article proposes several modified quasi Z-source dc/dc boost converters. These can achieve soft-switching by using a clamp-switch network comprised of an active switch and a diode in parallel with a capacitor connected across one of the inductors of the Z-source network. In this way, ringing at the transistor switching node is mitigated, and the voltage at the turn-on of the transistor is reduced. Even a zero voltage switching (ZVS) of the main transistor is possible if the capacitor in the clamp-switch network is adequately chosen. The proposed circuit structure and operating mode are described and validated through simulations and measurements on a low-power prototype.
Together with many success stories, promises such as the increase in production speed and the improvement in stakeholders' collaboration have contributed to making agile a transformation in the software industry in which many companies want to take part. However, driven either by a natural and expected evolution or by contextual factors that challenge the adoption of agile methods as prescribed by their creator(s), software processes in practice mutate into hybrids over time. Are these still agile In this article, we investigate the question: what makes a software development method agile We present an empirical study grounded in a large-scale international survey that aims to identify software development methods and practices that improve or tame agility. Based on 556 data points, we analyze the perceived degree of agility in the implementation of standard project disciplines and its relation to used development methods and practices. Our findings suggest that only a small number of participants operate their projects in a purely traditional or agile manner (under 15%). That said, most project disciplines and most practices show a clear trend towards increasing degrees of agility. Compared to the methods used to develop software, the selection of practices has a stronger effect on the degree of agility of a given discipline. Finally, there are no methods or practices that explicitly guarantee or prevent agility. We conclude that agility cannot be defined solely at the process level. Additional factors need to be taken into account when trying to implement or improve agility in a software company. Finally, we discuss the field of software process-related research in the light of our findings and present a roadmap for future research.
Among the multitude of software development processes available, hardly any is used by the book. Regardless of company size or industry sector, a majority of project teams and companies use customized processes that combine different development methods— so-called hybrid development methods. Even though such hybrid development methods are highly individualized, a common understanding of how to systematically construct synergetic practices is missing. In this paper, we make a first step towards devising such guidelines. Grounded in 1,467 data points from a large-scale online survey among practitioners, we study the current state of practice in process use to answer the question: What are hybrid development methods made of? Our findings reveal that only eight methods and few practices build the core of modern software development. This small set allows for statistically constructing hybrid development methods. Using an 85% agreement level in the participants’ selections, we provide two examples illustrating how hybrid development methods are characterized by the practices they are made of. Our evidence-based analysis approach lays the foundation for devising hybrid development methods.
In this paper we describe an interactive web-based visual analysis tool for Formula one races. It first provides an overview about all races on a yearly basis in a calendar-like representation. From this starting point, races can be selected and visually inspected in detail. We support a dynamic race position diagram as well as a more detailed lap times line plot for showing the drivers’ lap times in comparison. Many interaction techniques are supported like selections, filtering, highlighting, color coding, or details-on demand. We illustrate the usefulness of our visualization tool by applying it to a Formula one dataset while we describe the different dynamic visual racing patterns for a number of selected races and drivers.
Verification of an active time constant tuning technique for continuous-time delta-sigma modulators
(2022)
In this work we present a technique to compensate the effects of R-C / g m -C time-constant (TC) errors due to process variation in continuous-time delta-sigma modulators. Local TC error compensation factors are shifted around in the modulator loop to positions where they can be implemented efficiently with finely tunable circuit structures, such as current-steering digital-to-analog converters (DAC). We apply our technique to a third-order, single-bit, low-pass continuous-time delta-sigma modulator in cascaded integrator feedback structure, implemented in a 0.35-μm CMOS process. A tuning scheme for the reference currents of the feedback DACs is derived as a function of the individual TC errors and verified by circuit simulations. We confirm the tuning technique experimentally on the fabricated circuit over a TC parameter variation range of ±20%. Stable modulator operation is achieved for all parameter sets. The measured performances satisfy the expectations from our theoretical calculations and circuit-level simulations.
Redirected walking techniques allow people to walk in a larger virtual space than the physical extents of the laboratory. We describe two experiments conducted to investigate human sensitivity to walking on a curved path and to validate a new redirected walking technique. In a psychophysical experiment, we found that sensitivity to walking on a curved path was significantly lower for slower walking speeds (radius of 10 meters versus 22 meters). In an applied study, we investigated the influence of a velocity-dependent dynamic gain controller and an avatar controller on the average distance that participants were able to freely walk before needing to be reoriented. The mean walked distance was significantly greater in the dynamic gain controller condition, as compared to the static controller (22 meters versus 15 meters). Our results demonstrate that perceptually motivated dynamic redirected walking techniques, in combination with reorientation techniques, allow for unaided exploration of a large virtual city model.
Recognizing actions of humans, reliably inferring their meaning and being able to potentially exchange mutual social information are core challenges for autonomous systems when they directly share the same space with humans. Today’s technical perception solutions have been developed and tested mostly on standard vision benchmark datasets where manual labeling of sensory ground truth is a tedious but necessary task. Furthermore, rarely occurring human activities are underrepresented in such data leading to algorithms not recognizing such activities. For this purpose, we introduce a modular simulation framework which offers to train and validate algorithms on various environmental conditions. For this paper we created a dataset, containing rare human activities in urban areas, on which a current state of the art algorithm for pose estimation fails and demonstrate how to train such rare poses with simulated data only.
Engineers of the research project “Digital Product Life-Cycle” are using a graph-based design language to model all aspects of the product they are working on. This abstract model is the base for all further investigations, developments and implementations. In particular at early stages of development, collaborative decision making is very important. We propose a semantic augmented knowledge space by means of mixed reality technology, to support engineering teams. Therefore we present an interaction prototype consisting of a pico projector and a camera. In our usage scenario engineers are augmenting different artefacts in a virtual working environment. The concept of our prototype contains both an interaction and a technical concept. To realise implicit and natural interactions, we conducted two prototype tests: (1) A test with a low-fidelity prototype and (2) a test by using the method Wizard of Oz. As a result, we present a prototype with interaction selection using augmentation spotlighting and an interaction zoom as a semantic zoom.
This research addresses the question of why employees use enterprise social networks (ESN). Against the background of technology acceptance research, we propose an extended unified theory of acceptance and use of technology (UTAUT) model, adapt it to an ESN context, and test our model against data from ESN users of large and medium-sized enterprises. We use partial least squares structural equation modeling to gain insights into the determinants of ESN use. This paper contributes to ESN acceptance research by evaluating a model containing determinants of ESN use. It also examines the effects of determinants on five different usage dimensions of ESN. The results reveal that facilitating conditions are the main driver of ESN use while the impact of intention to use is comparably small. Implications for theory and practice are discussed.