Refine
Document Type
- Journal article (7)
Language
- English (7) (remove)
Has full text
- no (7) (remove)
Is part of the Bibliography
- yes (7)
Institute
- Texoversum (7)
Publisher
- dfv media group (3)
- Deutscher Fachverlag (1)
- IBP, Internat. Business Press Publ. (1)
- RSC (1)
- dfv Mediengruppe (1)
Cleanable bag filter : comparisons of different testing methods of ageing of filter materials
(2019)
Cleanable bag filters are used to separate dust and other airborne particulate systems. Due to typical process conditions, they are subject to thermal, chemical and mechanical stress during use. The main objective of the IGF project no. 18307 "Investigation of the chemical and thermal degradation of cleanable filter media and improvement of their resistance by surface modification", was the development of a valid test method which can reproduce degradation caused by high temperatures and aggressive chemical atmospheres in a practice-oriented but time-saving manner. Within the IGF project, 2 accelerated ageing methods were applied, both of which have the decisive advantage of investigating damage in the gas phase. Many resistances of filter materials are otherwise carried out by immersing the materials in a mostly liquid damage medium at a defined temperature. These resistances are difficult to transfer ageing in the gas phase.
In the IGF project No. 19617 N, nitrogen and phosphorous substituted alkoxysilanes were prepared and their ability to inhibit fire growth and spread for fabrics was explored. To this end, a series of flame retardants were synthesized using different strategies including click chemistry and nucleophilic substitution of commercial organophosphorus compounds with amino-based trialkoxysilanes and/or cyanuric chloride. The new halogen-free and aldehyde-free flame retardants were applied to different fabrics such as cotton (CO), polyethylene terephthalate (PET), polyamide (PA) and their blends using the well-known pad-dry-cure technique and sol-gel method. The flame-retarding efficiencies were evaluated by EN ISO 15025 test methods (protective clothing-protection against heat and flame method of test for limited flame spread). Good flame retardancy of the hybrid organic-inorganic materials was achieved with the addition of as small amount as 3-5 wt.% for cotton fabrics. Moreover, the water solubility and the washing resistance could be controlled through the functional groups attached to the phosphor atom or through the optimization of the curing temperature. Overall, the research project demonstrated that N-P-silanes are very good permanent flame retardants for textiles.
Protective welding clothing must meet various requirements. Among other things, it must be flame-resistant, protect against splashes of metal or sparks and also ensure protection against radiant heat and UV light caused by exposure to the welding arc. The protection against molten metal splashes is directly related to the fabric weight per unit area of the protective welding clothing and the level of protection is normally determined by the number of molten metal droplets that fall on the fabric. The higher the weight per unit area, the greater the protection against welding spatter. However, increasing the fabric weight per unit area also leads to psychologically uncomfortable wearing and thus increasing the physical strain on the wearer. The required basis weight per unit area of protective welding clothing can be reduced by applying nanoparticles as a protective layer while preserving other indispensable properties.
Indium tin oxide (ITO) particle coatings are known for high transparency in the visible, good conductive properties and near-infrared absorption. These properties depend on ITO particle's stiochiometric composition, defects and size. Here we present a method to gradually change ITO particle's optical properties by a simple and controlled laser irradiation process. The defined irradiation process and controlled energy dose input allows one to engineer the absorption and transsmission of coatings made from these particles. We investigate the role of the surrounding solvent, influence of laser fluence and the specific energy dose targeting modification of the ITO particle's morphology and chemistry by stepwise laser irradiation in a free liquid jet. TEM, SEM, EDX, XPS, XRD and Raman are used to elucidate the structural, morphological and chemical changes of the laser-induced ITO particles. On the basis of these results the observed modification of the optical properties is tentatively attributed to chemical changes, e.g. laser-induced defects or partial reduction.
The pH value of the human skin is not in the neutral range but is slightly acidic with values of – depending on the body part – 3.5 to 6. This provides a suitable habitat for the commensal skin floral but has a killing effect on some pathogenic micro-organisms and an inactivating effect on some viruses. This protective acid mantle of the skin thus represents a first external protective layer against infestation by pathogens. An appropriate surface pH on textiles can help to minimize the transmission of pathogens through the clothing of healthcare workers while at the same time not exerting a negative influence on the skin’s own flora. In addition, the colonization of e.g. bed linen by pathogenic microorganisms can be reduced. This can also have a positive influence on bacteria-associated odor formation on functional clothing.
The pH value of the human skin is not in the neutral range but is slightly acidic with values of – depending on the body part – 3.5 to 6. This provides a suitable habitat for the commensal skin floral but has a killing effect on some pathogenic micro-organisms and an inactivating effect on some viruses. This protective acid mantle of the skin thus represents a first external protective layer against infestation by pathogens. An appropriate surface pH on textiles can help to minimize the transmission of pathogens through the clothing of healthcare workers while at the same time not exerting a negative influence on the skin’s own flora. In addition, the colonization of e.g. bed linen by pathogenic microorganisms can be reduced. This can also have a positive influence on bacteria-associated odor formation on functional clothing.
Using the damage area as a quantification method for the Martindale test is a promising method to compare textile finishes without the need to test to full destruction. In addition, it could be shown that the results of Martindale tests performed with different pressure loads can be scaled to identical functional shape. If these results can be verified, this method would be a simplification of abrasive testing for different application areas.