Refine
Document Type
Is part of the Bibliography
- yes (16)
Institute
- Technik (16)
Publisher
- University of Colorado (4)
- Springer (3)
- ASME (2)
- Deutsche Gesellschaft für Computer- und Roboterassistierte Chirurgie e.V. (2)
- Elsevier (2)
- De Gruyter (1)
- Shaker (1)
Purpose
Injury or inflammation of the middle ear often results in the persistent tympanic membrane (TM) perforations, leading to conductive hearing loss (HL). However, in some cases the magnitude of HL exceeds that attributable by the TM perforation alone. The aim of the study is to better understand the effects of location and size of TM perforations on the sound transmission properties of the middle ear.
Methods
The middle ear transfer functions (METF) of six human temporal bones (TB) were compared before and after perforating the TM at different locations (anterior or posterior lower quadrant) and to different degrees (1 mm, ¼ of the TM, ½ of the TM, and full ablation). The sound-induced velocity of the stapes footplate was measured using single-point laser-Doppler-vibrometry (LDV). The METF were correlated with a Finite Element (FE) model of the middle ear, in which similar alterations were simulated.
Results
The measured and calculated METF showed frequency and perforation size dependent losses at all perforation locations. Starting at low frequencies, the loss expanded to higher frequencies with increased perforation size. In direct comparison, posterior TM perforations affected the transmission properties to a larger degree than anterior perforations. The asymmetry of the TM causes the malleus-incus complex to rotate and results in larger deflections in the posterior TM quadrants than in the anterior TM quadrants. Simulations in the FE model with a sealed cavity show that small perforations lead to a decrease in TM rigidity and thus to an increase in oscillation amplitude of the TM mainly above 1 kHz.
Conclusion
Size and location of TM perforations have a characteristic influence on the METF. The correlation of the experimental LDV measurements with an FE model contributes to a better understanding of the pathologic mechanisms of middle-ear diseases. If small perforations with significant HL are observed in daily clinical practice, additional middle ear pathologies should be considered. Further investigations on the loss of TM pretension due to perforations may be informative.
The hearing contact lens® (HCL) is a new type of hearing aid devices. One of its main components is a piezo-electric actuator. In order to evaluate and maximize the HCL's performance, a model of the HCL coupled to a middle-ear model was developed using finite element approach. The model was validated step by step starting with the HCL only. To validate the HCL model, vibrational measurements on the HCL were performed using a laser-doppler-vibrometer (LDV). Then, a silicone cap was placed onto the HCL to provide an interface between the HCL and the tympanic membrane of the middle-ear model, and additional LDV measurements on temporal bones were performed to validate the coupled model that was used to evaluate the equivalent sound pressure of the HCL. Moreover, a de-eper insight was gained into the contact between the HCL and tympanic membrane and its effects on the HCL performance. The model can be used to investigate the sensitivity of geometrical and material parameters with respect to performance measures of the HCL and evaluate the feedback behavior.
Hearing contact lens (HCL) is a new type of hearing aid devices. One of its main components is a piezo-electric actuator (PEA). In order to evaluate and maximizethe HCL´s performance, a model of the HCL coupled to the middle ear was developed using finite element (FE)approach. To validate the model, vibrational measurements on the HCL and temporal bones were performed using a Laser-Doppler-Vibrometer (LDV). The model was validated step by step starting with HCL only. Then a silicone cap was fitted onto the HCL to provide an interface between the HCL and the tympanic membrane. The HCL was placed on the tympanic membrane and additional measurements were performed to validate the coupled model. The model was used to evaluate the sensitivity of geometrical and material parameters with respect to performance measures of the HCL. Moreover, deeper insight was gained into the feedback behavior, which causes whistling sounds, and the contact between the HCL and tympanic membrane.
In order to evaluate the performance of different stapes prosthesis types, a coupled finite element (FE) model of human ear was developed. First, the middle-ear FE model was developed and validated using the middle-ear transfer function measurements available in literature including pathological cases. Then, the inner-ear FE model was developed and validated using tonotopy, impedance, and level of cochlea amplification curves from literature. Both models are based on pre-existing research with some improvements and were combined into one coupled FE model. The stapes in the coupled FE ear model was replaced with a model of a stapes prosthesis to create a reconstructed ear model that can be used to estimate how different types of protheses perform relative to each other as well as to the natural ear. This will help in designing of new innovative types of stapes prostheses or any other type of middle-ear prostheses as well as to improve the ones that are already available on the market.
This study describes a non-contact measuring and system identification procedure for evaluating inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament.
This study describes a non-contact measuring and parameter identification procedure designed to evaluate inhomogeneous stiffness and damping characteristics of the annular ligament in the physiological amplitude and frequency range without the application of large static external forces that can cause unnatural displacements of the stapes. To verify the procedure, measurements were first conducted on a steel beam. Then, measurements on an individual human cadaveric temporal bone sample were performed. The estimated results support the inhomogeneous stiffness and damping distribution of the annular ligament and are in a good agreement with the multiphoton microscopy results which show that the posterior-inferior corner of the stapes footplate is the stiffest region of the annular ligament. This method can potentially help to establish a correlation between stiffness and damping characteristics of the annular ligament and inertia properties of the stapes and, thus, help to reduce the number of independent parameters in the model-based hearing diagnosis.
Perforations of the tympanic membrane (TM) can occur as a result of injury or inflammation of the middle ear. These perforations can lead to conductive hearing loss (HL), where in some cases the magnitude of HL exceeds that attributable to the observed TM perforation alone. We aim with this study to better understand the effects of location and size of TM perforations on the sound transmitting properties of the middle ear.
The middle ear transfer function (METF) of six human temporal bones (TB; freshly frozen specimen of body donors) were compared before and after perforation of the TM at different locations (anterior or posterior lower quadrant) and of different sizes (1mm, ¼ of the TM, ½ of the TM, and full ablation). The
METF were correlated with a Finite Element (FE) model of the middle ear, in which similar alterations were simulated.
The measured and simulated FE model METFs exhibited frequency and perforation size dependent amplitude losses at all locations and severities. In direct comparison, posterior TM perforations affected the transmission properties to a larger degree than perforations of the anterior quadrant. This could possibly be caused by an asymmetry of the TM, where the malleus-incus complex rotates and results in larger deflections in the posterior TM half than in the anterior TM half. The FE model of the TM with a sealed cavity suggest that small perforations result in a decrease of TM rigidity and thus to an increase in oscillation amplitude of the TM, mostly above 1 kHz.
The location and size of TM perforations influence the METF in a reproducible way. Correlating our data with the FE model could help to better understand the pathologic mechanisms of middle-ear diseases. If small TM perforations with uncharacteristically significant HL are observed in daily clinical practice, additional middle ear pathologies should be considered. Further investigations on the loss of TM pretension due to perforations may be informative.
Knochenleitungshörgerät
(2021)
Bei einem Knochenleitungshörgerät (1) umfassend eine Audioeinheit (2) und einen Hautkontaktteil (3), wobei der Hautkontaktteil (3) eine Klebeschicht (4) zur Befestigung auf der Haut (5) eines Benutzers, ein erstes Kupplungsstück (6) zum Verbinden mit einem gegengleichen zweiten Kupplungsstück (7) der Audioeinheit (2), und einen Schwingungsübertragungsteil (8) mit einer Kontaktfläche (9) zum direkten Kontakt mit der Haut (5) aufweist, wird vorgeschlagen, dass das Schwingungsübertragungsteil (8) in einem Anpassungszustand durch Andrücken an die Haut (5) mit einer ersten Anpresskraft plastisch verformbar ist, dass das Schwingungsübertragungsteil (8) in einem Betriebszustand im Wesentlichen formstabil ist, und dass das Schwingungsübertragungsteil (8) durch einen Verfestigungsschritt von dem Anpassungszustand in den Betriebszustand verbringbar ist.
Das Gehör ist mehr als jedes andere Sinnesorgan für die menschliche Sprache und ihre Entwicklung verantwortlich und stellt auf kleinstem Raum ein anatomisch und physiologisch einzigartiges Gebilde dar. Es beeindruckt vor allem durch seinen großen Dynamikbereich.
Während im Bereich der Hörschwelle der eben hörbare Schalldruck etwa 20 μPa beträgt, können die Drucke und Amplituden bis zur Schmerzgrenze noch etwa zweimillionenfach gesteigert werden. Derartige physiologische Schalldrücke sind jedoch immer noch verschwindend klein gegenüber den ebenfalls auf das Ohr einwirkenden statischen Luftdruckschwankungen, wie sie beispielsweise beim Treppensteigen, Zug- bzw. Autofahren, Fliegen oder beim Naseputzen vorkommen. Zwar führen diese zu einer veränderten Wahrnehmung, jedoch nicht zu einer Schäadigung des Ohrs. Diese Fähigkeit, trotz großer statischer Druckschwankungen in der Umgebung, gleichzeitig winzige physiologische Schalldrücke wahrnehmen zu können, ist hauptsächlich in den nichtlinearen, viskoelastischen Eigenschaften der Gelenke und Bänder des Mittelohrs sowie des Trommelfells begründet.
Das Ziel dieser Arbeit ist es, dieses nichtlineare Verhalten des Mittelohrs bei großen Belastungen und großen Verschiebungen durch nichtlineare, räumliche Ersatzmodelle auf mechanischer Basis abzubilden. Zur Charakterisierung der nichtlinearen Eigenschaften der Gerhörknöchelchenkette werden statische und dynamische Messungen an humanen Felsenbeinen durchgeführt. Ein besonderes Augenmerk ist auf die Charakterisierung der nichtlinearen, viskoelastischen Eigenschaften des Ringbands, des Trommelfells, der Trommelfellsehne und der beiden Mittelohrgelenke gerichtet. Im Blick auf die klinische Praxis wird zum einen anhand von Messergebnissen das Schädigungsrisiko bei einer Stapeschirurgie diskutiert sowie die Auswirkungen von Vorspannungen im Mittelohrapparat am Beispiel des aktiven Implantats Carina untersucht.
The hearing contact lens® (HCL) is a new type of hearing aid devices. One of its main components is a piezo-electric actuator. In order to evaluate and maximize the HCL’s performance, a model of the HCL coupled to the middle ear was developed using finite element approach. The model was validated step by step starting with the HCL only. To validate the HCL model, vibrational measurements on the HCL were performed using a Laser-Doppler-Vibrometer (LDV). Then, a silicone cap was placed onto the HCL to provide an interface between the HCL and the tympanic membrane of the middle-ear model and additional LDV measurements on temporal bones were performed to validate the coupled model. The coupled model was used to evaluate the equivalent sound pressure of the HCL. Moreover, a deeper insight was gained into the contact between the HCL and tympanic membrane and its effects on the HCL performance. The model can be used to investigate the sensitivity of geometrical and material parameters with respect to performance measures of the HCL and evaluate the feedback behavior.