Refine
Document Type
- Journal article (8) (remove)
Has full text
- yes (8)
Is part of the Bibliography
- yes (8)
Institute
- Technik (8)
This article illustrates a method for sensorless control of a switched reluctance motor. The detection of the time instants for switching between the working phases is determined based on the evaluation of the switching frequency of the hysteresis current controllers for appropriately selected sensing phases. This enables a simple and cost efficient implementation. The method is compared with a pulse injection method in terms of efficiency and resolution.
In this article feedback linearization for control-affine nonlinear systems is extended to systems where linearization is not feasible in the complete state space by combining state feedback linearization and homotopy numerical continuation in subspaces of the phase space where feedback linearization fails. Starting from the conceptual simplicity of feedback linearization, this new method expands the scope of their applicability to irregular systems with poorly expressed relative degree. The method is illustrated on a simple SISO–system and by controlling the speed and the rotor flux linkage in a three phase induction machine.
Purpose. To improve the efficiency of the closed-cycle operation of the field-orientation induction machine in dynamic behavior when load conditions are changing, considering the nonlinearities of the main inductance.
Methodology. The optimal control problem is defined as the minimization of the time integral of the energy losses. The algorithm observed in this paper uses the Matlab/Simulink, dSPACE real-time interface, and C language. Handling real-time applications is made in ControlDesk experiment software for seamless ECU development.
Findings. Adiscrete-time model with an integrated predictive control scheme where the optimization is performed online at every sampling step has been developed. The optimal field-producing current trajectory is determined, so that the copper losses are minimized over a wide operational range. Additionally, the comparison of measurement results with conventional methods is provided, which validates the advantages and performance of the control scheme.
Originality. To solve the given problem, the information vector on the current state of the coordinates of the electromechanical system is used to form a controlling influence in the dynamic mode of operation. For the first time, the formation process of controls has considered the current state and the desired future state of the system in the real-time domain.
Practical value. Apredictive iterative approach for optimal flux level of an induction machine is important to generate the required electromagnetic torque and to reduce power losses simultaneously.
Methods for increasing the energy efficiency of induction motors by an appropriate control strategy have been a subject of research during the last years. Several methods for loss minimization have been developed for induction motors operated in a steady state. In recent years, some solutions for the dynamic case have been given as well either using an online or offline optimization approach, implying a certain computational burden, which is undesired in practice. This paper shows that the appropriate application of steady state techniques during transients due to a changing motor torque is a suboptimal strategy with an acceptable performance for efficiency optimization given an induction machine where saturation effects of the main inductance must be considered. The optimization problem is simplified such that a simple suboptimal solution is possible and the quality of the suboptimal solution is investigated by simulations and measurements. The proposed solution is simple, easy to implement, and does not require an online optimization. In addition, the influence of magnetizing induction saturation is considered.
Der vorliegende Beitrag stellte die beiden Verfahrensklassen parameterbasierte Verfahren und Suchverfahren für eine energieeffiziente Betriebsführung von Asynchronmaschinen im stationären Zustand kurz vor und zeigte das Potential zur Reduktion der Verlustleistung in stationären Arbeitspunkten für zwei Motoren unterschiedlicher Baugröße. Dabei wurde deutlich, dass insbesondere im unteren Teillastbereich eine erhebliche Verringerung der Verlustleistung erzielt werden kann.
Energy efficiency optimization techniques for steady state operation of induction machines are the state-of-the-art, and many methods have already been developed. However, many real-world industrial and electric vehicle applications cannot be considered to be in steady state operation. The focus of this contribution is on the efficiency optimization of induction machines in dynamic operation. Online dynamic operation is challenging due to the computational complexity and the required low sample times in an inverter. An offline optimization is therefore conducted to gain knowledge. Based on this offline optimal solution, a simple and easy to implement template based solution is developed. This approach aims at replicating the solution found by the offline optimization by resembling the shape and anticipative characteristics of the optimal flux trajectory. The energy efficiency improvement of the template based solution is verified by simulations and measurements on a test bench and using a real-world drive cycle scenario. For comparison, a model predictive numerical online optimization is investigated too.
Das Thema Energiewende ist in aller Munde. Sie soll eine sichere, umweltverträgliche und wirtschaftlich erfolgreiche Zukunft ermöglichen. Ein Ansatz dafür ist die dezentrale, also verbrauchernahe Energieversorgung. Der Trend geht weg vom konventionellen Kraftwerk und hin zur Kraft-Wärme-Koppelung und erneuerbaren Energien. Für einen absehbaren Zeitraum geht es auch darum, zentrale und dezentrale Elemente sinnvoll miteinander zu verknüpfen. Mit der Frage, wie Energiesysteme angepasst und kombiniert werden müssen, um den Energiehaushalt – den nationalen wie den von Unternehmen und Privatpersonen – optimieren zu können, beschäftigt sich das Reutlinger Energiezentrum für Dezentrale Energiesysteme und Energieeffizienz in Lehre und Forschung. Es ist die Kombination aus Technik und Betriebswirtschaft, aus einzelwirtschaftlicher Optimierung und aus Gesamtsicht, die das Reutlinger Energiezentrum ausmacht. Im Folgenden werden die Schwerpunkte des Forschungsteams dargestellt.
This paper presents a modular and scalable power electronics concept for motor control with continuous output voltage. In contrast to multilevel concepts, modules with continuous output voltage are connected in series. The continuous output voltage of each module is obtained by using gallium nitride (GaN) high electron motility transistor (HEMT)s as switches inside the modules with a switching frequency in the range between 500 kHz and 1 MHz. Due to this high switching frequency a LC filter is integrated into the module resulting in a continuous output voltage. A main topic of the paper is the active damping of this LC output filter for each module and the analysis of the series connection of the damping behaviour. The results are illustrated with simulations and measurements.