Refine
Document Type
Is part of the Bibliography
- yes (43)
Institute
- Technik (43)
Publisher
- IEEE (21)
- VDE Verlag GmbH (6)
- Apprimus Wissenschaftsverlag (2)
- Academic Publications Ltd. (1)
- British Institute of Non-Destructive Testing (1)
- De Gruyter Open (1)
- GRID-FTN (1)
- Hochschule für Technik, Wirtschaft und Kultur Leipzig (1)
- Hochschulen für Angewandte Wissenschaften Baden-Württemberg, Koordinierungsstelle (1)
- MDPI (1)
In diesem Beitrag wurde gezeigt, wie ein bereits bekanntes Verfahren zur modellprädiktiven Regelung zur Optimierung der Energieeffizienz einer Asynchronmaschine im dynamischen Betrieb eingesetzt werden kann. Dazu wurden zunächst die Beziehungen für die Verlustleistung bei alleiniger Berücksichtigung der Kupferverluste im dynamischen Betrieb hergeleitet. Ausgehend davon wurde das Optimierungsproblem formuliert, der Einfluss von Parametern des modellprädiktiven Verfahrens auf das Optimierungsergebnis untersucht und damit Vorschlagswerte für diese Parameter ermittelt. Der Vergleich mit zwei weiteren Verfahren ohne Optimierung bzw. mit Optimierung allein für stationäre Arbeitspunkte zeigt die Vorteile des modellprädiktiven Verfahrens.
In this paper a double hogger used in woodworking machines is considered. The machining tools are driven by induction machines operated by standard inverters. During production the load of these motors changes periodically between low load and high load at a given speed. This paper investigates the reduction of power losses in such an application using an appropriate energy efficient control strategy for the induction machines.
The current paper proposes a design method for an active damping approach for LC output filters in a power stage for motor control with continuous output voltage. The power stage uses GaN-HEMTs and operates at switching frequencies in a range between 500 kHz and 1MHz. The active damping of the output filter is achieved here by a feedback of the filter inductor current using a high-pass structure. The paper discusses the impact of this feedback on the system behavior and proposes a design method.
In this work, a brushless, harmonic-excited wound-rotor synchronous machine is investigated which utilizes special stator and rotor windings. The windings magnetically decouple the fundamental torque-producing field from the harmonic field required for the inductive power transfer to the field coil. In contrast to conventional harmonic-excited synchronous machines, the whole winding is utilized for both torque production and harmonic excitation such that no additional copper for auxiliary windings is needed. Different rotor topologies using rotating power electronic components are investigated and their efficiencies have been compared based on Finite-Element calculation and circuit analysis.
In this work, a brushless, harmonic-excited wound-rotor synchronous machine without any auxiliary windings which can provide full torque at startup is investigated experimentally. The excitation power is transferred inductively by superimposing an additional harmonic field of different pole-pair number on top of the airgap field. This is achieved by feeding the parallel paths of the stator and rotor winding separately. A prototype for the harmonic-excited synchronous machine has been constructed and experimental results are presented to verify the concept. The main loss contributors are identified and the importance of considering core losses under harmonic excitation is discussed. A general analytical model for harmonic excited synchronous machines is proposed which enables a quick estimation of the iron core flux densities and the core losses generated by the additional harmonic currents.
Purpose. To improve the efficiency of the closed-cycle operation of the field-orientation induction machine in dynamic behavior when load conditions are changing, considering the nonlinearities of the main inductance.
Methodology. The optimal control problem is defined as the minimization of the time integral of the energy losses. The algorithm observed in this paper uses the Matlab/Simulink, dSPACE real-time interface, and C language. Handling real-time applications is made in ControlDesk experiment software for seamless ECU development.
Findings. Adiscrete-time model with an integrated predictive control scheme where the optimization is performed online at every sampling step has been developed. The optimal field-producing current trajectory is determined, so that the copper losses are minimized over a wide operational range. Additionally, the comparison of measurement results with conventional methods is provided, which validates the advantages and performance of the control scheme.
Originality. To solve the given problem, the information vector on the current state of the coordinates of the electromechanical system is used to form a controlling influence in the dynamic mode of operation. For the first time, the formation process of controls has considered the current state and the desired future state of the system in the real-time domain.
Practical value. Apredictive iterative approach for optimal flux level of an induction machine is important to generate the required electromagnetic torque and to reduce power losses simultaneously.
Methods for increasing the energy efficiency of induction motors by an appropriate control strategy have been a subject of research during the last years. Several methods for loss minimization have been developed for induction motors operated in a steady state. In recent years, some solutions for the dynamic case have been given as well either using an online or offline optimization approach, implying a certain computational burden, which is undesired in practice. This paper shows that the appropriate application of steady state techniques during transients due to a changing motor torque is a suboptimal strategy with an acceptable performance for efficiency optimization given an induction machine where saturation effects of the main inductance must be considered. The optimization problem is simplified such that a simple suboptimal solution is possible and the quality of the suboptimal solution is investigated by simulations and measurements. The proposed solution is simple, easy to implement, and does not require an online optimization. In addition, the influence of magnetizing induction saturation is considered.
Der vorliegende Beitrag stellte die beiden Verfahrensklassen parameterbasierte Verfahren und Suchverfahren für eine energieeffiziente Betriebsführung von Asynchronmaschinen im stationären Zustand kurz vor und zeigte das Potential zur Reduktion der Verlustleistung in stationären Arbeitspunkten für zwei Motoren unterschiedlicher Baugröße. Dabei wurde deutlich, dass insbesondere im unteren Teillastbereich eine erhebliche Verringerung der Verlustleistung erzielt werden kann.
Energy efficiency optimization techniques for steady state operation of induction machines are the state-of-the-art, and many methods have already been developed. However, many real-world industrial and electric vehicle applications cannot be considered to be in steady state operation. The focus of this contribution is on the efficiency optimization of induction machines in dynamic operation. Online dynamic operation is challenging due to the computational complexity and the required low sample times in an inverter. An offline optimization is therefore conducted to gain knowledge. Based on this offline optimal solution, a simple and easy to implement template based solution is developed. This approach aims at replicating the solution found by the offline optimization by resembling the shape and anticipative characteristics of the optimal flux trajectory. The energy efficiency improvement of the template based solution is verified by simulations and measurements on a test bench and using a real-world drive cycle scenario. For comparison, a model predictive numerical online optimization is investigated too.