Refine
Year of publication
- 2018 (8) (remove)
Document Type
- Conference proceeding (4)
- Journal article (3)
- Report (1)
Is part of the Bibliography
- yes (8)
Institute
- Technik (8)
Publisher
Coupling electricity and heat sector is one of the most necessary actions for the successful energy transition. Efficient electrification for space heating and domestic hot water generation is needed for buildings, which are not connected to any district heating network, as distributed heating demand momentarily is largely met by fossil fuels. Hence, hybrid energy systems will play a pivotal role for the energy transition in buildings. Heat pumps running on PV-electricity is one of the most widely discussed combination for this purpose. In this paper, a heuristic optimization method for the optimal operation of a heat pump driven by the objective for maximum onsite PV electricity utilization is presented. In this context, the thermal flexibility of the building and a thermal energy storage (TES) for generation of domestic hot water (DHW) are activated in order to shift the operation of the heat pump to times of PV-generation. Yearly simulations for a system consisting of heat pump, PV modules, building with floor heating installation and TES for DHW generation are carried out. Variation parameters for the simulation include room temperature amplitude (0.5, 1, 1.5 and 2 K) based on mean room temperature (21 °C), PV-capacity (4, 6, 8 and 10 kW) and type of heat pump (ground source and air source type). The yearly energy balances show that buildings offer significant thermal storage capacity avoiding an additional, large TES for space heating fulfillment and improving the share of onsite PV electricity utilization. With introduction of a battery, which has been analyzed as well for different sizes (1.9, 4.8, 7.7 and 10.6 kWh), the share of onsite PVelectricity utilization can even be improved. However, thermal flexibility supplemented by the varying room temperature amplitude for a bigger battery does not improve the share of onsite PV-electricity utilization. Nevertheless, even with a battery not more than 50% of the electrical load including operation of the heat pump can be covered by PV-electricity for the specific system under investigation. This is noteworthy on the one hand, since it indicates that a hybrid heating system consisting of heat pump and PV cannot solely cover the heat demand of residential buildings. One the other hand, this emphasizes the necessity to include further renewable sources like wind power, in order to draw the complete picture. This, however, is beyond the scope of this paper, which mainly focuses on introduction and verification of the novel control method with regard to a practical building.
Micro grids often consist of energy generators, storages and consumers with controllers which are not prepared for their integration into communication networks for energy systems. In this paper it will be presented, how standards from the field of energy automation can be applied in such controllers. The data for communication interfaces can be structured according to the IEC 61850- or the VHPREADY standard. It is investigated which requirements must be supported to implement such data models within the controllers. For the transmission of the data we propose the OPC UA protocol, which supports extensive security measures and which is today available for nearly all modern types of controllers and computers.
The increasing share of renewable energy with volatile production results in higher variability of prices for electrical energy. Optimized operating schedules, e.g., for industrial units, can yield a considerable reduction of energy costs by shifting processes with high power consumption to times with low energy prices. We present a distributed control architecture for virtual power plants (VPPs) where VPP participants benefit from flexible adaptation of schedules to price forecasts while maintaining control of their operating schedule. An aggregator trades at the energy market on behalf of the participants and benefits from more detailed and reliable load profiles within the VPP.
This article presents a two-level optimisation approach for the management of controllable and distributed converters with storage systems across different energy sectors. It aims at the reduction of electrical peak load and at the economical optimisation of the electrical energy exchange with the grid, based on a dynamic external incentive, e.g. through dynamic energy price tariffs. By means of a secure, standardised and lean communication with two different internal price signals, an optimal flexibility provision shall be achieved. The two-level optimisation approach consists of a centralised and several distributed decentralised entities. At the centralised level, the distributed flexibilities are invoked for optimal scheduling on the basis of an internal price algorithm for stimulating the decentralised entities. Based on that internal incentive and on the expected demands for electricity, heating and cooling, the decentralised optimisation algorithms provide optimal generation schedules for the energy converters. The suggested interaction between the central and decentral entities is successfully tested and the principle potential for peak shaving and the adaption to dynamic energy-related market prices could be demonstrated and compared to different energy management strategies such as the standard heat-led operation. Further, variations of the system parameters such as load shifting potential, installed capacity and system diversification are evaluated against cost saving potential for the energy supply and overall system performance.
Das Thema Energieflexibilität und Anpassung der eigenerzeugten Energie an die Energieerzeugung aus regenerativen Energien gewinnt an Bedeutung. Regulierbare Eigenerzeugungsanlagen können zur Stabilisierung des Netzes einen enormen Beitrag leisten. Der Aufsatz zeigt, welchen Effekt der Einsatz von BHWK auf die Galvanikbranche hat und wie nicht nur die eigenen Energiekosten reduziert, sondern auch die Möglichkeit geschaffen wird, auf Signale der Energiewirtschaft zu reagieren, ohne die Energieversorgung zu unterbrechen.
Dass die Kraft-Wärme-Kopplung (KWK) einen unverzichtbaren Baustein der Energiewende darstellt, ist mittlerweile unstrittig, da sie mit Hilfe von Blockheizkraftwerken (BHKW) die Erzeugung von elektrischer Energie komplementär zum Angebot von PV- und Windkraftanlagen mit einem hohen Maß an Energieeffizienz leisten kann. Die ausgezeichnete Energieeffizient von BHKW nutzen deshalb bereits viele Unternehmen zur Senkung ihrer Energiekosten.
Im Projekt "Heat4SmartGrid" soll untersucht werden, ob und wie mit Hilfe von Wärmepumpen der Anteil erneuerbarer Energien an der Wärmeversorgung in Baden-Württemberg (BW) gesteigert werden und gleichzeitig das Verteilnetz durch eine intelligente Steuerung der Wärmepumpensysteme entlastet werden kann. Hierzu ist im AP 1 für das Jahr 2050 ein Wärmebedarf in BW von 35 TWh errechnet worden, bei 40 TWh im Jahr 2030. Im Vergleich zum Jahr 2015 ergibt sich so ein Rückgang um 30 % zum Jahr 2030 und bis zum Jahr 2050 um 40 %. Weiterhin steigt auf Grund von energetischer Sanierung im Gebäudebestand das technische Potenzial für Wärmepumpen, ausgehend von 8 TWh im Jahr 2015, auf 20 TWh bis 2030 und auf 23 TWh bis 2040. Insgesamt könnten so 63 % aller Wohnanteile in BW durch Wärmepumpen mit thermischer Energie versorgt werden. Der Einsatz von Wärmepumpensystemen ist somit ein wichtiger Baustein für das Gelingen der Wärmewende. Zur Steuerung der Wärmepumpen sind in AP 2 Betriebsmodi in Abhängigkeit von Anwendung und Gebäudetyp entwickelt worden. Diese werden mittels Korrelationsfunktionen für die Heizleistung für Luft-Wasser- und Sole-Wasser-Wärmepumpen bestimmt. Hierauf aufbauend sind für die in AP 1 ermittelten Gebäudetypen die erreichbare Jahresarbeitszahl der beiden Wärmepumpentechnologien ermittelt worden. Zur intelligenten system- und netzdienlichen Steuerung dieser Wärmepumpensysteme werden Prognosen über die lokale Erzeugung und den lokalen Verbrauch benötigt, die in AP 5 erarbeitet werden. In Abhängigkeit der Prognose-anwendung sind sowohl univariate (elektrische Last und thermische Brauchwarmwasserlast) als auch multivariate Prognosemodelle (PV-Erzeugung und thermische Heizwarmwasserlast) implementiert worden.
In dem vorliegenden Zwischenbericht sind die Arbeiten und Ergebnisse zusammengefasst, die im Rahmen des Projektes GalvanoFlex_BW während der ersten acht Projektmonate der insgesamt 2 1/2 jährigen Laufzeit durchgeführt und erzielt wurden. Ziel des Projektes ist die Untersuchung und Verbesserung der Energieeffizienz in Industrieunternehmen mit dem speziellen Fokus auf der Einführung stromoptimiert betriebener KWK-Anlagen. Entsprechend des Arbeits- und Zeitplans sind die Literaturrecherche, die Festlegung von Prozesstypen, die Datenerfassung, die Strategieentwickung zur stromoptimierten KWK, die Optimierung der Schnittstelle zwischen KWK und Gleichrichtern, der Aufbau der Branchenplattform und die sozial-wissenschaftliche Begleitforschung beschrieben. Der aktuelle Projektstand deckt sich dabei im Wesentlichen mit den Vorgaben aus dem vorgelegten Zeitplan.