Refine
Document Type
- Conference proceeding (41)
- Patent / Standard / Guidelines (11)
- Journal article (9)
- Book chapter (1)
Is part of the Bibliography
- yes (62)
Institute
- Technik (62)
Publisher
- IEEE (31)
- Hochschule Ulm (6)
- Technische Universität Berlin (3)
- Technische Universität Darmstadt (2)
- Arbeitsgemeinschaft Simulation (ASIM) (1)
- Copernicus GmbH (1)
- ECPE (1)
- International Union of Radio Science / Landesausschuss in der Bundesrepublik Deutschland (1)
- Power Sources Manufacturers Association (1)
- Springer (1)
Bootstrap circuits are mainly used for supplying a gate driver circuit to provide the gate overdrive voltage for a high-side NMOS transistor. The required charge has to be provided by a bootstrap capacitor which is often too large for integration if an acceptable voltage dip at the capacitor has to be guaranteed. Three options of an area efficient bootstrap circuit for a high side driver with an output stage of two NMOS transistors are proposed. The key idea is that the main bootstrap capacitor is supported by a second bootstrap capacitor, which is charged to a higher voltage and connected when the gate driver turns on. A high voltage swing at the second capacitor leads to a high charge allocation. Both bootstrap capacitors require up to 70% less area compared to a conventional bootstrap circuit. This enables compact power management systems with fewer discrete components and smaller die size. A calculation guideline for optimum bootstrap capacitor sizing is given. The circuit was manufactured in a 180nm high-voltage BiCMOS technology as part of a high-voltage gate driver. Measurements confirm the benefit of high-voltage charge storing. The fully integrated bootstrap circuit including two stacked 75.8pF and 18.9pF capacitors results in a voltage dip lower than 1V. This matches well with the theory of the calculation guideline.