Refine
Document Type
- Journal article (7)
- Conference proceeding (1)
Language
- English (8)
Is part of the Bibliography
- yes (8)
Institute
- Life Sciences (8)
Publisher
- Wiley (3)
- MDPI (2)
- Elsevier (1)
- Springer (1)
- Springer International Publishing (1)
Fast pyrolysis as a valorization mechanism for banana rachis and low-density polyethylene waste
(2021)
Banana rachis and low-density polyethylene (LDPE) were selected as secondary feedstocks for the study of fast pyrolysis in a free-fall reactor. The experiments were performed at 600 °C for banana rachis and 450 °C for LDPE, based on literature and thermogravimetric analysis. The gaseous products of both feedstocks present similar composition in the C1-C2 compounds, while C3 compounds are only found in LDPE. The liquid products from banana and LDPE correspond to functional groups and shorter hydrocarbons, respectively. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) analyses of the char showed important morphological changes to spheres in LDPE and structural changes due to thermal decomposition in the biomass. The pyrolysis char has high potential as adsorbent, encapsulation, or catalyst.
Characterization of low density polyethylene greenhouse films during the composting of rose residues
(2022)
This study presents an evaluation of a potential alternative to plastic degradation in the form of organic composting. It stems from the urgent need of finding solutions to the plastic residues and focuses on the compost-based degradation of greenhouse film covers in an important rose exporter company in Ecuador. Thus, this study analyzes the physical, chemical, and biological changes of rose wastes composting, and also evaluates the stability of new and aged agricultural plastic under these conditions. Interestingly, results of compost characterization show a slow degradation rate of organic matter and total organic carbon, along with a significant increase in pH and rise of bacterial populations. However, the results demonstrate that despite these findings, composting conditions had no significant influence on plastic degradation, and while deterioration of aged plastic samples was reported in some tests, it may be the result of environmental conditions and a prolonged exposure to solar radiation. Importantly, these factors could facilitate the adhesion of microorganisms and promote plastic biodegradation. Hence, it is encouraged for future studies to analyze the ecotoxicity of plastics in the compost, as well as isolate, identify, and evaluate the possible biodegradative potential of these microorganisms as an alternative to plastic waste management.
Highly active MgP catalyst for biodiesel production and polyethylene terephthalate depolymerization
(2022)
A highly active heterogeneous catalyst was designed and employed for two relevant transesterification reactions. i. e. biodiesel production and depolymerization of polyethylene terephthalate (PET). The material was prepared in the presence of pectin by the co-precipitation method followed by calcination at 600°C (MgP). MgP is efficient for biodiesel production, with a yield of ≈99% in 6 h/65°C, and with a molar ratio methanol: oil of 21:1. The reference material (MgR, prepared in absence of pectin) showed a poor catalytic performance in the same experimental conditions. For the methanolysis of PET, 100% PET conversion was obtained with 3 wt% catalyst, 200:1 methanol: PET molar ratio at milder conditions 160°C/4 h, compared to a 33% conversion without the presence of a catalyst. The catalyst showed remarkable stability and negligible deactivation after five consecutive runs. Materials were characterized by SEM, XRD, IR, TGA, and BET.
Modifying the natural characteristics of PLA 3D-printed models is of interest in various research areas in which 3D-printing is applied. Thus, in this study, we describe the simple impregnation of FDM 3D-printed PLA samples with well-defined silver nanoparticles and an iron metal salt. Quasi-spherical and dodecahedra silver particles were strongly attached at the channels of 3D-printed milli-fluidic reactors to demonstrate their attachment and interaction with the flow, as an example. Furthermore, Fenton-like reactions were successfully developed by an iron catalyst impregnated in 3D-printed stirrer caps to induce the degradation of a dye and showed excellent reproducibility.
The chemical recycling of used motor oil via catalytic cracking to convert it into secondary diesel-like fuels is a sustainable and technically attractive solution for managing environmental concerns associated with traditional disposal. In this context, this study was conducted to screen basic and acidic-aluminum silicate catalysts doped with different metals, including Mg, Zn, Cu, and Ni. The catalysts were thoroughly characterized using various techniques such as N2 adsorption–desorption isotherms, FT-IR spectroscopy, and TG analysis. The liquid and gaseous products were identified using GC, and their characteristics were compared with acceptable ranges from ASTM characterization methods for diesel fuel. The results showed that metal doping improved the performance of the catalysts, resulting in higher conversion rates of up to 65%, compared to thermal (15%) and aluminum silicates (≈20%). Among all catalysts, basic aluminum silicates doped with Ni showed the best catalytic performance, with conversions and yields three times higher than aluminum silicate catalysts. These findings significantly contribute to developing efficient and eco-friendly processes for the chemical recycling of used motor oil. This study highlights the potential of basic aluminum silicates doped with Ni as a promising catalyst for catalytic cracking and encourages further research in this area.
Ecuador, traditionally an agricultural based economy, has a great potential for valorizing their industrial residues. This study, presents a techno-economic analysis for applying a novel biomass oxidation method to produce formic and acetic acids from coffee husk residues in Machala, Ecuador. The analysis determined that the time of return of investment was lower than 5 years, making this project economically feasible, when producing approx. 1000 tons of formic acid per year, which is enough for supplying the Ecuadorian market. This production, would reduce imports costs and develop the chemical industry in the country.
Herein, biochar from biomass residues is demonstrated as active materials for the catalytic cracking of waste motor oil into diesel-like fuels. Above all, alkali-treated rice husk biochar showed great activity with a 250% increase in the kinetic constant compared to the thermal cracking. It also showed better activity than synthetic materials, as previously reported. Moreover, much lower activation energy (185.77 to 293.48 kJ/mol) for the cracking process was also obtained. According to materials characterization, the catalytic activity was more related to the nature of the biochar’s surface than its specific surface area. Finally, liquid products complied with all the physical properties defined by international standards for diesel-like fuels, with the presence of hydrocarbons chains between C10 - C27 similar to the ones obtained in commercial diesel.
Bioenergy production is a new and promising industry in Ecuador. However, a confusing variety of laws, which are spread among different regulating institutions, regulate the agricultural sector. Such dispersion makes it difficult for farmers and businesses to understand applicable rights, duties, regulations and agricultural policies. Moreover, this rather young industry lacks important experience. In the first section of this work, the existing Ecuadorian legislation on bioenergy is presented and analyzed. Then, a brief, thorough analysis and comparison are carried out for experiences not only in developed countries, but also with similar cultural frameworks and comparable climatic conditions. The results are summarized as specific recommendations that have been handed to the National Agricultural Chamber of Ecuador from academia for the proposal of a Unified Agricultural Code established in the Ecuadorian legal hierarchy as an Organic Law.