Refine
Document Type
- Journal article (18)
- Book chapter (2)
Language
- English (20) (remove)
Is part of the Bibliography
- yes (20)
Institute
- Texoversum (20)
Publisher
- Elsevier (4)
- MDPI (3)
- dfv Mediengruppe (3)
- dfv media group (3)
- Deutscher Fachverlag (2)
- ACS (1)
- IBP, Internat. Business Press Publ. (1)
- RSC (1)
- SAGE Publications Ltd (1)
- Springer (1)
Several ionic liquids are excellent solvents for cellulose. Starting from that finishing of PET fabrics with cellulose dissolved in ionic liquids like 1-ethyl 3-methyl imidazolium acetate, diethylphosphate and chloride, or the chloride of butyl-methyl imidazolium has been investigated. Finishing has been carried out from solutions of different concentrations, using microcrystalline cellulose or cotton and by employing different cross-linkers. Viscosity of solutions has been investigated for different ionic liquids,concentrations, cellulose sources, linkers and temperatures. Since ionic liquids exhibit no vapor pressure,simple pad-dry-cure processes are excluded. Before drying the ionic liquid has to be removed by a rinsing step. Accordingly rinsing with fresh ionic liquid followed by water or the direct rinsing with waterhave been tested. The amount of cellulose deposited has been investigated by gravimetry, zinc chlorideiodine test as well as reactive dyeing. Results concerning wettability, water up-take, surface resistance,wear-resistance or washing stability are presented.
The sol-gel approach offers a new class of flame retardants with a high potential for textile applications. Pure inorganic sol-gel systems do, however, typically not provide an effect sufficient for a sel-fextinguishing behavior on its own. We therefore employed compounds with nitrogen and phosphorous containing groups. Especially the combination of compounds with both elements, using the synergism, is promising for the aim to find well-applicable, environmental friendly, halogen-free flame retardants. In our approach, the sol-gel network ensured on the one hand the link to the textile as nonflammable binder. On the other hand, the sol-gel-based networks modified with functional groups containing nitrogen groups provided flame retardancy. In this way, a flame retardant finishing for textiles could be obtained by simple finishing techniques as, e.g., padding. Besides a characterization with various flame tests (e.g., according to EN ISO 15025 e protective clothing), we used a combination of cone calorimetry, thermogravimetry coupled with infrared spectroscopy analysis and scanning electron microscopy to analyze the mechanism of flame retardancy. Thus, we could show that the main mechanism is based on the formation of a protection layer. This work provides a model system for sol-gel-based flame retardants and has the potential to show the principle feasibility of the sol-gel approach in flame retardancy of textiles. It therefore lays the groundwork for tailoring sol-gel layers from newly synthesized sol-gel precursors containing nitrogen and phosphorous groups.
Indium tin oxide (ITO) particle coatings are known for high transparency in the visible, good conductive properties and near-infrared absorption. These properties depend on ITO particle's stiochiometric composition, defects and size. Here we present a method to gradually change ITO particle's optical properties by a simple and controlled laser irradiation process. The defined irradiation process and controlled energy dose input allows one to engineer the absorption and transsmission of coatings made from these particles. We investigate the role of the surrounding solvent, influence of laser fluence and the specific energy dose targeting modification of the ITO particle's morphology and chemistry by stepwise laser irradiation in a free liquid jet. TEM, SEM, EDX, XPS, XRD and Raman are used to elucidate the structural, morphological and chemical changes of the laser-induced ITO particles. On the basis of these results the observed modification of the optical properties is tentatively attributed to chemical changes, e.g. laser-induced defects or partial reduction.
The wet chemical deposition of solution processed transparent conducting oxides (TCO) provides an alternative low cost and economical deposition technique to realize large-areas of conducting films. Since the price for the most common TCO Indium Tin Oxide rises enormously, Aluminum Zinc Oxide (AZO) as alternative TCO reaches more and more interest. The optoelectronical properties of nanoparticle coatings strongly depend beneath the porosity of the coating on the shape and size of the used particles. By using bigger or rod-shaped particles it is possible to minimize the amount of grain boundaries resulting in an improvement of the electrical properties, whereas particles bigger than 100 nm should not be used if highly transparent coatings are necessary as these big particles scatter the visible light and lower the transmittance of the coatings. In this work we present a simple method to synthesize AZO particles with different shape and size, but comparable electronical properties. We use a simple, well reproducible polyol method for synthesis and influence the shape and size of the particles by adding different amounts of water to the precursor solution. We can show that the addition of aluminum as dopant strongly hinders the crystal growth but the addition of water counteracts this, so that both, spherical and rod-shaped particles can be obtained.
Using the damage area as a quantification method for the Martindale test is a promising method to compare textile finishes without the need to test to full destruction. In addition, it could be shown that the results of Martindale tests performed with different pressure loads can be scaled to identical functional shape. If these results can be verified, this method would be a simplification of abrasive testing for different application areas.
Cleanable bag filter : comparisons of different testing methods of ageing of filter materials
(2019)
Cleanable bag filters are used to separate dust and other airborne particulate systems. Due to typical process conditions, they are subject to thermal, chemical and mechanical stress during use. The main objective of the IGF project no. 18307 "Investigation of the chemical and thermal degradation of cleanable filter media and improvement of their resistance by surface modification", was the development of a valid test method which can reproduce degradation caused by high temperatures and aggressive chemical atmospheres in a practice-oriented but time-saving manner. Within the IGF project, 2 accelerated ageing methods were applied, both of which have the decisive advantage of investigating damage in the gas phase. Many resistances of filter materials are otherwise carried out by immersing the materials in a mostly liquid damage medium at a defined temperature. These resistances are difficult to transfer ageing in the gas phase.
Three established test methods employed for evaluating the abrasion or wear resistance of textile materials were compared to gain deeper insight into the specific damaging mechanisms to better understand a possible comparability of the results of the different tests. The knowledge of these mechanisms is necessary for a systematic development of finishing agents improving the wear resistance of textiles. Martindale, Schopper, and Einlehner tests were used to analyze two different fabrics made of natural (cotton) or synthetic (polyethylene terephthalate) fibers, respectively. Samples were investigated by digital microscopy and scanning electron microscopy to visualize the damage. Damage symptoms are compared and discussed with respect to differences in the damaging mechanisms.
Are textile structures better? In the professional world, there is no doubt that textile composites can offer many advantages. It is well known that they are often better than non-textile alternatives. There are manifold examples. Innovative developments are not only the popular textile reinforced concrete which was awarded with the Deutscher Zukunftspreis (German Future Award) but also a huge number of probably less perceived or spectacular products based on fiber-reinforced plastics.
Nanocoatings based on sol–gel coatings are presented as suitable tool to modify materials based on polymers. The main focus is set onto textiles as the most common polymer materials. It presents which types of functionalization can be reached by modified sol–gel processes. Also a suitable categorization of functions is given and set into relation to common applications. A special focus is set on the functional properties, antimicrobial, UV protective, and flame retardant. The concept of bifunctional coatings is discussed and especially the combination of water-repellent and antistatic is presented.
In the IGF project No. 19617 N, nitrogen and phosphorous substituted alkoxysilanes were prepared and their ability to inhibit fire growth and spread for fabrics was explored. To this end, a series of flame retardants were synthesized using different strategies including click chemistry and nucleophilic substitution of commercial organophosphorus compounds with amino-based trialkoxysilanes and/or cyanuric chloride. The new halogen-free and aldehyde-free flame retardants were applied to different fabrics such as cotton (CO), polyethylene terephthalate (PET), polyamide (PA) and their blends using the well-known pad-dry-cure technique and sol-gel method. The flame-retarding efficiencies were evaluated by EN ISO 15025 test methods (protective clothing-protection against heat and flame method of test for limited flame spread). Good flame retardancy of the hybrid organic-inorganic materials was achieved with the addition of as small amount as 3-5 wt.% for cotton fabrics. Moreover, the water solubility and the washing resistance could be controlled through the functional groups attached to the phosphor atom or through the optimization of the curing temperature. Overall, the research project demonstrated that N-P-silanes are very good permanent flame retardants for textiles.