Ja
Refine
Document Type
- Conference proceeding (69) (remove)
Is part of the Bibliography
- yes (69)
Institute
- Technik (69) (remove)
Publisher
- Hochschule Ulm (11)
- Arbeitsgemeinschaft Simulation (ASIM) (6)
- European Association for the Development of Renewable Energy, Environment and Power Quality (4)
- Hochschule Reutlingen (4)
- SCITEPRESS (4)
- University of Colorado (4)
- Technische Universität Berlin (3)
- Technische Universität Graz (3)
- Apprimus Wissenschaftsverlag (2)
- Deutsche Gesellschaft für Computer- und Roboterassistierte Chirurgie e.V. (2)
Different network architectures are being used to build remote laboratories. Historically, it has been difficult to integrate industrial control systems with higher level IT systems like enterprise resource planning (ERP), manufacturing execution systems (MES), and manufacturing operations management (MOM). Getting these systems to communicate with one another has proven to be relatively difficult due to the absence of shared protocols between them. The Open Platform Communications United Architecture (OPC-UA) protocol was introduced as a remedy for this issue and is gaining popularity, but what if open-source protocols that are widely used in the IT industry could be used instead? This paper presents the development of an IT-Architecture for a cyber-physical industrial control systems laboratory that enables a seamless interconnection and integration of its elements. The architecture utilises Node-Red technology. Node-RED is an open-source programming platform developed by IBM that is focused on making it simple to link physical components, APIs, and web services. This cyber-physical laboratory is for learning principles of an industrial cascaded process control factory. Finally, this text will also discuss future work relating to digital twin (DT). A coupled tank system is selected as a teaching factory to illustrate a range of fluid control application in a typical chemical process factory.
In recent years, the demand for accurate and efficient 3D body scanning technologies has increased, driven by the growing interest in personalised textile development and health care. This position paper presents the implementation of a novel 3D body scanner that integrates multiple RGB cameras and image stitching techniques to generate detailed point clouds and 3D mesh models. Our system significantly enhances the scanning process, achieving higher resolution and fidelity while reducing the cost, time and effort required for data acquisition and processing. Furthermore, we evaluate the potential use cases and applications of our 3D body scanner, focusing on the textile technology and health sectors. In textile development, the 3D scanner contributes to bespoke clothing production, allowing designers to construct made-to-measure garments, thus minimising waste and enhancing customer satisfaction through fitting clothing. In mental health care, the 3D body scanner can be employed as a tool for body image analysis, providing valuable insights into the psychological and emotional aspects of self-perception. By exploring the synergy between the 3D body scanner and these fields, we aim to foster interdisciplinary collaborations that drive advancements in personalisation, sustainability, and well-being.
Patterns are virtually simulated in 3D CAD programs before production to check the fit. However, achieving lifelike representations of human avatars, especially regarding soft tissue dynamics, remains challenging. This is mainly since conventional avatars in garment CAD programs are simulated with a continuous hard surface and not corresponding to the human physical and mechanical body properties of soft tissue. In the real world, the human body’s natural shape is affected by the contact pressure of tight-fitting textiles. To verify the fit of a simulated garment, the interactions between the individual body shape and the garment must be considered. This paper introduces an innovative approach to digitising the softness of human tissue using 4D scanning technology. The primary objective of this research is to explore the interactions between tissue softness and different compression levels of apparel, exerting pressure on the tissue to capture the changes in the natural shape. Therefore, to generate data and model an avatar with soft body physics, it is essential to capture the deform ability and elasticity of the soft tissue and map it into the modification options for a simulation. To aim this, various methods from different fields were researched and compared to evaluate 4D scanning as the most suitable method for capturing tissue deformability in vivo. In particular, it should be considered that the human body has different deformation capabilities depending on age, the amount of muscle and body fat. In addition, different tissue zones have different mechanical properties, so it is essential to identify and classify them to back up these properties for the simulation. It has been shown that by digitising the obtained data of the different defined applied pressure levels, a prediction of the deformation of the tissue of the exact person becomes possible. As technology advances and data sets grow, this approach has the potential to reshape how we verify fit digitally with soft avatars and leverage their realistic soft tissue properties for various practical purposes.
This article presents a modified method of performing power flow calculations as an alternative to pure energy-based simulations of off-grid hybrid systems. The enhancement consists in transforming the scenario-based power flow method into a discrete time-dependent algorithm with the inclusion of bus and controller dynamics.
Online-Portal "MINTFabrik"
(2023)
Das browserbasierte Online-Portal "MINTFabrik" entstand im Zuge der Maßnahmen zur Minderung von Lernrückständen mit der Idee, eine Lücke zu schließen, die es oft bei großen Online-Brückenkursen gibt: Ein Mangel an Übungsaufgaben, die schnell zugänglich sind, einfach ausgesucht werden können und gut auf bestimmte Lehrveranstaltungen und deren Anforderungen zugeschnitten sind. Die Entwicklung erfolgte in einer Kooperation der Hochschule Reutlingen mit der Tübinger Softwarefirma "Let´s Make Sense GmbH". Das Portal verzichtet bewusst auf eine Lektionsstruktur und besteht ausschließlich aus einzelnen Lernbausteinen (Items), d.h. Video-Tutorials, VisuApps und Aufgaben, die über eine komfortable Suche mit Filtern erreichbar sind und direkt bearbeitet werden können. Ein besonderes Merkmal der MINTFabrik sind Mikrokurse, die von Lehrenden und Studierenden erstellt werden können. Das sind kleine Einheiten aus einigen wenigen Items, die beliebig miteinander kombinierbar sind.
The presented research is dedicated to estimation of the correlation between the level of renewable energy sources and the costs of congestion management in electric networks in selected European countries. Data of six countries in North-West European area (Italy, Spain, Germany, France, Poland and Austria) were investigated. Factors considered included grid congestion costs including re-dispatching costs as well as countertrading costs, gross electricity generation, installed capacity of electric generating facilities, installed capacity of electric non-dispatchable renewable energy sources and total electricity consumption. Special attention is paid to the share of renewable energy sources. It is found that the grid congestion costs are not clearly affected by penetration of non-dispatchable renewables in all the analysed countries and therefore a clear mathematical correlation cannot no be extrapolated with the available data. The results of this research show in general a loose dependency of the grid congestion costs on the penetration of renewables and a strong dependency on the total electrical consumption of the country.
Simulation eines dezentralen Regelungssystems zur netzdienlichen Erzeugung von grünem Wasserstoff
(2023)
Wasserstoff wird einen bedeutenden Beitrag zum Wandel von Industrie und Gesellschaft in eine klimaneutrale Zukunft leisten. Der Aufbau und die ökologisch und ökonomisch sinnvolle Nutzung einer Wasserstoffinfrastruktur sind hierbei die zentralen Herausforderungen. Ein notwendiger Baustein ist die effiziente Bereitstellung von grünem Strom und dem daraus produzierten grünen Wasserstoff. Der vorliegende Beitrag stellt ein dezentrales Regel- und Kommunikationssystem vor, mit dem Angebot und Nachfrage von grünem Strom und Wasserstoff in einem System aus dezentralen Akteuren in Einklang gebracht werden. In einer hierzu entwickelten Simulationsumgebung wird die Funktion und der Nutzen dieses dezentralen Ansatzes verdeutlicht.
AI-based prediction and recommender systems are widely used in various industry sectors. However, general acceptance of AI-enabled systems is still widely uninvestigated. Therefore, firstly we conducted a survey with 559 respondents. Findings suggested that AI-enabled systems should be fair, transparent, consider personality traits and perform tasks efficiently. Secondly, we developed a system for the Facial Beauty Prediction (FBP) benchmark that automatically evaluates facial attractiveness. As our previous experiments have proven, these results are usually highly correlated with human ratings. Consequently they also reflect human bias in annotations. An upcoming challenge for scientists is to provide training data and AI algorithms that can withstand distorted information. In this work, we introduce AntiDiscriminationNet (ADN), a superior attractiveness prediction network. We propose a new method to generate an unbiased convolutional neural network (CNN) to improve the fairn ess of machine learning in facial dataset. To train unbiased networks we generate synthetic images and weight training data for anti-discrimination assessments towards different ethnicities. Additionally, we introduce an approach with entropy penalty terms to reduce the bias of our CNN. Our research provides insights in how to train and build fair machine learning models for facial image analysis by minimising implicit biases. Our AntiDiscriminationNet finally outperforms all competitors in the FBP benchmark by achieving a Pearson correlation coefficient of PCC = 0.9601.
Perforations of the tympanic membrane (TM) can occur as a result of injury or inflammation of the middle ear. These perforations can lead to conductive hearing loss (HL), where in some cases the magnitude of HL exceeds that attributable to the observed TM perforation alone. We aim with this study to better understand the effects of location and size of TM perforations on the sound transmitting properties of the middle ear.
The middle ear transfer function (METF) of six human temporal bones (TB; freshly frozen specimen of body donors) were compared before and after perforation of the TM at different locations (anterior or posterior lower quadrant) and of different sizes (1mm, ¼ of the TM, ½ of the TM, and full ablation). The
METF were correlated with a Finite Element (FE) model of the middle ear, in which similar alterations were simulated.
The measured and simulated FE model METFs exhibited frequency and perforation size dependent amplitude losses at all locations and severities. In direct comparison, posterior TM perforations affected the transmission properties to a larger degree than perforations of the anterior quadrant. This could possibly be caused by an asymmetry of the TM, where the malleus-incus complex rotates and results in larger deflections in the posterior TM half than in the anterior TM half. The FE model of the TM with a sealed cavity suggest that small perforations result in a decrease of TM rigidity and thus to an increase in oscillation amplitude of the TM, mostly above 1 kHz.
The location and size of TM perforations influence the METF in a reproducible way. Correlating our data with the FE model could help to better understand the pathologic mechanisms of middle-ear diseases. If small TM perforations with uncharacteristically significant HL are observed in daily clinical practice, additional middle ear pathologies should be considered. Further investigations on the loss of TM pretension due to perforations may be informative.
In order to evaluate the performance of different stapes prosthesis types, a coupled finite element (FE) model of human ear was developed. First, the middle-ear FE model was developed and validated using the middle-ear transfer function measurements available in literature including pathological cases. Then, the inner-ear FE model was developed and validated using tonotopy, impedance, and level of cochlea amplification curves from literature. Both models are based on pre-existing research with some improvements and were combined into one coupled FE model. The stapes in the coupled FE ear model was replaced with a model of a stapes prosthesis to create a reconstructed ear model that can be used to estimate how different types of protheses perform relative to each other as well as to the natural ear. This will help in designing of new innovative types of stapes prostheses or any other type of middle-ear prostheses as well as to improve the ones that are already available on the market.