Informatik
Refine
Document Type
- Conference proceeding (498)
- Journal article (186)
- Book chapter (48)
- Doctoral Thesis (10)
- Book (3)
- Report (1)
- Working Paper (1)
Has full text
- yes (747) (remove)
Is part of the Bibliography
- yes (747)
Institute
- Informatik (747)
- Technik (2)
Publisher
- Springer (160)
- Hochschule Reutlingen (95)
- IEEE (89)
- Gesellschaft für Informatik e.V (59)
- Elsevier (42)
- Association for Computing Machinery (37)
- IARIA (26)
- RWTH Aachen (14)
- De Gruyter (13)
- SciTePress (11)
This study is about estimating the reproducibility of finding palpation points of three different anatomical landmarks in the human body (Xiphoid Process and the 2 Hip Crests) to support a navigated ultrasound application. On 6 test subjects with different body mass index the three palpation points were located five times by two examiners. The deviation from the target position was calculated and correlated to the fat thickness above each palpation point. The reproducibility of the measurements had a mean error of ≈13.5 mm +- 4 mm, which seems to be sufficient for the desired application field.
Das Ziel dieser Arbeit war die Umsetzung eines Wahrnehmungsensors für Softwareagenten, die über ein virtuelles Menschmodell in einer dreidimensionalen Umgebung agieren. Hierbei sollen die Agenten über den Sensor in der Lage sein, semantische Informationen zu geometrischen Objekten in der Umgebung zu erhalten. Hierfür wurden zwei Verfahren umgesetzt, die das menschliche Sehen simulieren, indem Objekte erkannt werden, wenn diese innerhalb eines Sichtfelds liegen. Ein Problem, das dabei gelöst werden muss, ist die Identifizierung möglicher Verdeckungen der Objekte. Ein Ansatz, dieses Problem zu lösen, ist der Ray-Tracing Ansatz, welcher für das erste Verfahren umgesetzt wurde. Das zweite Verfahren verwendet den Occlusion-Culling Ansatz. Auswertungen beider Verfahren haben gezeigt, dass der Ray-Tracing Ansatz eine schnellere Laufzeit aufweist, der Occlusion-Culling Ansatz jedoch mehr unverdeckte Objekte im Sichtfeld erkennt.
Nowadays, the importance of early active patient mobilization in the recovery and rehabilitation phase has increased significantly. One way to involve patients in the treatment is a gamification-like approach, which is one of the methods of motivation in various life processes. This article shows a system prototype for patients who require physical activity because of active early mobilization after medical interventions or during illness. Bedridden patients and people with a sedentary lifestyle (predominantly lying in bed) are also potential users. The main idea for the concept was non-contact system implementation for the patients making them feel effortless during its usage. The system consists of three related parts: hardware, software, and game application. To test the relevance and coherence of the system, it was used by 35 people. The participants were asked to play a video game requiring them to make body movements while lying down. Then they were asked to take part in a small survey to evaluate the system's usability. As a result, we offer a prototype consisting of hardware and software parts that can increase and diversify physical activity during active early mobilization of patients and prevent the occurrence of possible health problems due to predominantly low activity. The proposed design can be possibly implemented in hospitals, rehabilitation centers, and even at home.
Monitoring heart rate and breathing is essential in understanding the physiological processes for sleep analysis. Polysomnography (PSG) system have traditionally been used for sleep monitoring, but alternative methods can help to make sleep monitoring more portable in someone's home. This study conducted a series of experiments to investigate the use of pressure sensors placed under the bed as an alternative to PSG for monitoring heart rate and breathing during sleep. The following sets of experiments involved the addition of small rubber domes - transparent and black - that were glued to the pressure sensor. The resulting data were compared with the PSG system to determine the accuracy of the pressure sensor readings. The study found that the pressure sensor provided reliable data for extracting heart rate and respiration rate, with mean absolute errors (MAE) of 2.32 and 3.24 for respiration and heart rate, respectively. However, the addition of small rubber hemispheres did not significantly improve the accuracy of the readings, with MAEs of 2.3 bpm and 7.56 breaths per minute for respiration rate and heart rate, respectively. The findings of this study suggest that pressure sensors placed under the bed may serve as a viable alternative to traditional PSG systems for monitoring heart rate and breathing during sleep. These sensors provide a more comfortable and non-invasive method of sleep monitoring. However, the addition of small rubber domes did not significantly enhance the accuracy of the readings, indicating that it may not be a worthwhile addition to the pressure sensor system.
Sleep analysis using a Polysomnography system is difficult and expensive. That is why we suggest a non-invasive and unobtrusive measurement. Very few people want the cables or devices attached to their bodies during sleep. The proposed approach is to implement a monitoring system, so the subject is not bothered. As a result, the idea is a non-invasive monitoring system based on detecting pressure distribution. This system should be able to measure the pressure differences that occur during a single heartbeat and during breathing through the mattress. The system consists of two blocks signal acquisition and signal processing. This whole technology should be economical to be affordable enough for every user. As a result, preprocessed data is obtained for further detailed analysis using different filters for heartbeat and respiration detection. In the initial stage of filtration, Butterworth filters are used.
With the progress of technology in modern hospitals, an intelligent perioperative situation recognition will gain more relevance due to its potential to substantially improve surgical workflows by providing situation knowledge in real-time. Such knowledge can be extracted from image data by machine learning techniques but poses a privacy threat to the staff’s and patients’ personal data. De-identification is a possible solution for removing visual sensitive information. In this work, we developed a YOLO v3 based prototype to detect sensitive areas in the image in real-time. These are then deidentified using common image obfuscation techniques. Our approach shows that it is principle suitable for de-identifying sensitive data in OR images and contributes to a privacyrespectful way of processing in the context of situation recognition in the OR.
The tale of 1000 cores: an evaluation of concurrency control on real(ly) large multi-socket hardware
(2020)
In this paper, we set out the goal to revisit the results of “Starring into the Abyss [...] of Concurrency Control with [1000] Cores” and analyse in-memory DBMSs on today’s large hardware. Despite the original assumption of the authors, today we do not see single-socket CPUs with 1000 cores. Instead multi-socket hardware made its way into production data centres. Hence, we follow up on this prior work with an evaluation of the characteristics of concurrency control schemes on real production multi-socket hardware with 1568 cores. To our surprise, we made several interesting findings which we report on in this paper.
In this paper, we propose a radical new approach for scale-out distributed DBMSs. Instead of hard-baking an architectural model, such as a shared-nothing architecture, into the distributed DBMS design, we aim for a new class of so-called architecture-less DBMSs. The main idea is that an architecture-less DBMS can mimic any architecture on a per-query basis on-the-fly without any additional overhead for reconfiguration. Our initial results show that our architecture-less DBMS AnyDB can provide significant speedup across varying workloads compared to a traditional DBMS implementing a static architecture.
In our initial DaMoN paper, we set out the goal to revisit the results of “Starring into the Abyss [...] of Concurrency Control with [1000] Cores” (Yu in Proc. VLDB Endow 8: 209-220, 2014). Against their assumption, today we do not see single-socket CPUs with 1000 cores. Instead, multi-socket hardware is prevalent today and in fact offers over 1000 cores. Hence, we evaluated concurrency control (CC) schemes on a real (Intel-based) multi-socket platform. To our surprise, we made interesting findings opposing results of the original analysis that we discussed in our initial DaMoN paper. In this paper, we further broaden our analysis, detailing the effect of hardware and workload characteristics via additional real hardware platforms (IBM Power8 and 9) and the full TPC-C transaction mix. Among others, we identified clear connections between the performance of the CC schemes and hardware characteristics, especially concerning NUMA and CPU cache. Overall, we conclude that no CC scheme can efficiently make use of large multi-socket hardware in a robust manner and suggest several directions on how CC schemes and overall OLTP DBMS should evolve in future.
In this paper, we present a new approach for achieving robust performance of data structures making it easier to reuse the same design for different hardware generations but also for different workloads. To achieve robust performance, the main idea is to strictly separate the data structure design from the actual strategies to execute access operations and adjust the actual execution strategies by means of so-called configurations instead of hard-wiring the execution strategy into the data structure. In our evaluation we demonstrate the benefits of this configuration approach for individual data structures as well as complex OLTP workloads.
The basic idea behind a wearable robotic grasp assistancesystem is to support people that suffer from severe motor impairments in daily activities. Such a system needs to act mostly autonomously and according to the user’s intent. Vision-based hand pose estimation could be an integral part of a larger control and assistance framework. In this paper we evaluate the performance of egocentric monocular hand pose estimation for a robot-controlled hand exoskeleton in a simulation. For hand pose estimation we adopt a Convolutional Neural Network (CNN). We train and evaluate this network with computer graphics, created by our own data generator. In order to guide further design decisions we focus in our experiments on two egocentric camera viewpoints tested on synthetic data with the help of a 3D-scanned hand model, with and without an exoskeleton attached to it.We observe that hand pose estimation with a wrist-mounted camera performs more accurate than with a head-mounted camera in the context of our simulation. Further, a grasp assistance system attached to the hand alters visual appearance and can improve hand pose estimation. Our experiment provides useful insights for the integration of sensors into a context sensitive analysis framework for intelligent assistance.
Additive Manufacturing is increasingly used in the industrial sector as a result of continuous development. In the Production Planning and Control (PPC) system, AM enables an agile response in the area of detailed and process planning, especially for a large number of plants. For this purpose, a concept for a PPC system for AM is presented, which takes into account the requirements for integration into the operational enterprise software system. The technical applicability will be demonstrated by individual implemented sections. The presented solution approach promises a more efficient utilization of the plants and a more elastic use.
Development work within an experimental environment, in which certain properties are investigated and optimized, requires many test runs and is therefore often associated with long execution times, costs and risks. This can affect product, material and technology development in industry and research. New digital driver technologies offer the possibility to automate complex manual work steps in a cost-effective way, to increase the relevance of the results and to accelerate the processes many times over. In this context, this article presents a low-cost, modular and open-source machine vision system for test execution and evaluates it on the basis of a real industrial application. For this purpose a methodology for the automated execution of the load intervals, the process documentation and for the evaluation of the generated data by means of machine learning to classify wear levels. The software and the mechanical structure are designed to be adaptable to different conditions, components and for a variety of tasks in industry and research. The mechanical structure is required for tracking the test object and represents a motion platform with independent positioning by machine vision operators or machine learning. An evaluation of the state of the test object is performed by the transfer learning after the initial documentation run. The manual procedure for classifying the visually recorded data on the state of the test object is described for the training material. This leads to an increased resource efficiency on the material as well as on the personnel side since on the one hand the significance of the tests performed is increased by the continuous documentation and on the other hand the responsible experts can be assigned time efficiently. The presence and know-how of the experts are therefore only required for defined and decisive events during the execution of the experiments. Furthermore, the generated data are suitable for later use as an additional source of data for predictive maintenance of the developed object.
The blockchain technology enables a common data basis between the participants. Entries are logged and the authenticity of the participants is guaranteed. In the case of a relationship between customers and producers, this would lead to verifiable cooperation, which would be a major step as companies enter into service contracts based on the flow of many small transactions through communication. This paper proposes an architecture that enables the creation and processing of orders between the customer and producers via a blockchain based production network. The handling of larger files which are traceable via the blockchain is also shown and the use of a public or permissioned blockchain for an application case is also considered.
The use of additive manufacturing technologies for industrial production is constantly growing. This technology differs from the known production proecdures. The areas for scheduling, detailed and sequence planning are particularly important for additive production due to the long print times and flexible use of the production area. Therefore, production-relevant variables are considered and used for the production planning and control (PPC) of additive manufacturing machines. For this purpose, an optimization model is presented which shows a time-oriented build space utilization. In the implementation, a nesting algorithm is used to check the combinability of different models for each individual print job.
The promise of immutable documents to make it easier and less expensive for consumers and producers to collaborate in a verifiable way would represent an enormous progress, especially as companies strive for establish service contracts which are based on the flow of many small transactions using machine-to-machine communication. The blockchain technology logs these data, verifies the authenticity and make them available for service offers. This work deals with an architecture enabling to setup order processing between consumers and produceers using blockchain. In this way, the technical feasibility is shown and the special characteristics of blockchain production networks will be discussed.
Additive manufacturing (AM) is a promising manufacturing method for many industrial sectors. For this application, industrial requirements such as high production volumes and coordinated implementation must be taken into account. These tasks of the internal handling of production facilities are carried out by the Production Planning and Control (PPC) information system. A key factor in the planning and scheduling is the exact calculation of manufacturing times. For this purpose we investigate the use of Machine Learning (ML) for the prediction of manufacturing times of AM facilities.
Sowohl bei den industriellen als auch wissenschaftlichen Institutionen nimmt die Anwendung der additiven Fertigung stetig zu und ist insbesondere in den Bereichen der Prototypenentwicklung nicht mehr wegzudenken. Die werkzeuglose Herstellung von Teilen ermöglicht eine dynamische Nutzung der Produktionsressourcen bis unmittelbar zum Fertigungsstart. Dies erlaubt, einerseits in den Bereichen der Feinterminierung und Ablaufplanung, agil auf Veränderungen zu reagieren und andererseits Modelle unterschiedlicher Fertigungsaufträge miteinander zu kombinieren, um somit eine hohe Effizienz der Fertigungsanlagen zu erreichen. Bei der Nutzung von multiplen Anlagen in einem Unternehmen oder im Partnerverbund stellt die vorhandene Intransparenz Unternehmen und Unternehmensnetzwerke vor viele Herausforderungen. Die Blockchain Technologie ermöglicht eine gemeinsame Datenbasis zwischen den Teilnehmern. Die Einträge werden protokolliert und die Authentizität der Teilnehmer wird gewährleistet. Dies führt, im Falle der Beziehung zwischen Kunden und Produzenten, zu einer nachprüfbaren Zusammenarbeit, da Unternehmen Dienstleistungsverträge abschließen, die auf dem Fluss vieler kleiner Transaktionen basieren. In diesem Beitrag wird dargestellt, wie verfügbare additive Fertigungsressourcen erkannt werden, sowie, unter der Verwendung der Blockchain-Technologie, in einem dezentralen Produktionsnetzwerk angeboten und von unterschiedlichen Akteuren genutzt werden können.
The performance and scalability of modern data-intensive systems are limited by massive data movement of growing datasets across the whole memory hierarchy to the CPUs. Such traditional processor-centric DBMS architectures are bandwidth- and latency-bound. Processing-in-Memory (PIM) designs seek to overcome these limitations by integrating memory and processing functionality on the same chip. PIM targets near- or in-memory data processing, leveraging the greater in-situ parallelism and bandwidth.
In this paper, we introduce pimDB and provide an initial comparison of processor-centric and PIM-DBMS approaches under different aspects, such as scalability and parallelism, cache-awareness, or PIM-specific compute/bandwidth tradeoffs. The evaluation is performed end-to-end on a real PIM hardware system from UPMEM.
Even though near-data processing (NDP) can provably reduce data transfers and increase performance, current NDP is solely utilized in read-only settings. Slow or tedious to implement synchronization and invalidation mechanisms between host and smart storage make NDP support for data-intensive update operations difficult. In this paper, we introduce a low-latency cache-coherent shared lock table for update NDP settings in disaggregated memory environments. It utilizes the novel CCIX interconnect technology and is integrated in neoDBMS, a near-data processing DBMS for smart storage. Our evaluation indicates end-to-end lock latencies of ∼80-100ns and robust performance under contention.