Informatik
Refine
Document Type
- Conference proceeding (71)
- Book chapter (14)
- Journal article (12)
- Anthology (10)
- Doctoral Thesis (8)
- Book (7)
- Patent / Standard / Guidelines (2)
- Report (1)
- Working Paper (1)
Has full text
- no (126) (remove)
Is part of the Bibliography
- yes (126)
Institute
- Informatik (126)
Publisher
Personalized remote healthcare monitoring is in continuous development due to the technology improvements of sensors and wearable electronic systems. A state of the art of research works on wearable sensors for healthcare applications is presented in this work. Furthermore, a state of the art of wearable devices, chest and wrist band and smartwatches available on the market for health and sport monitoring is presented in this paper. Many activity trackers are commercially available. The prices are continuously reducing and the performances are improving, but commercial devices do not provide raw data and are therefore not useful for research purposes.
Power line communications (PLC) reuse the existing power-grid infrastructure for the transmission of data signals. As power line the communication technology does not require a dedicated network setup, it can be used to connect a multitude of sensors and Internet of Things (IoT) devices. Those IoT devices could be deployed in homes, streets, or industrial environments for sensing and to control related applications. The key challenge faced by future IoT-oriented narrowband PLC networks is to provide a high quality of service (QoS). In fact, the power line channel has been traditionally considered too hostile. Combined with the fact that spectrum is a scarce resource and interference from other users, this requirement calls for means to increase spectral efficiency radically and to improve link reliability. However, the research activities carried out in the last decade have shown that it is a suitable technology for a large number of applications. Motivated by the relevant impact of PLC on IoT, this paper proposed a cooperative spectrum allocation in IoT-oriented narrowband PLC networks using an iterative water-filling algorithm.
Information Systems in Distributed Environment (ISDE) is becoming a prominent standard in this globalization era due to advancement in information and communication technologies. The advent of the internet has supported Distributed Software Development (DSD) by introducing new concepts and opportunities, resulting in benefits such as scalability, flexibility, interdependence, reduced cost, resource pools, and usage tracking. The distributed development of information systems as well as their deployment and operation in distributed environments impose new challenges for software organizations and can lead to business advantages. In distributed environments, business units collaborate across time zones, organizational boundaries, work cultures and geographical distances, something that ultimately has led to an increasing diversification and growing complexity of cooperation among units. The real-world practice of developing, deployment and operation of information systems in globally distributed projects has been viewed from various perspectives, though technical and engineering in conjunction with managerial and organizational viewpoints have dominated the researcher’s attention so far. Successful participation in distributed environments, however, is ultimately a matter of the participants understanding and exploiting the particularities of their respective local contexts at specific points in time and exploring practical solutions through the local resources available.
This special issue of the Computer standards & interfaces journal therefore includes papers received from the public call for papers and extended and improved versions of those papers that were selected from the best of the International Workshop on Information Systems in Distributed Environment (ISDE 2014). It aims to serve as a forum to bring together academics, researchers, practitioners and students in the field of distributed information system, by presenting novel developments and lesson learned from real world cases, and to promote the exchange of ideas, discussion and advancement in these areas.
The very first International Workshop on Software-intensive Business: Start-ups, Ecosystems and Platforms (SiBW 2018) was held in Espoo (Greater Helsinki), Finland on December 3rd, 2018 – just a day before SLUSH 2018, the world’s biggest startup event. Thanks to the collaboration with the organizers of SLUSH, many of the software-intensive business researchers and practitioners took part also in this event.
The international workshop gathered together 35 registered attendees, from Sweden, Germany, Latvia, Finland, Italy and the Netherlands representing both academia as well as industry. The event itself was sponsored by VTT Technical Research Centre of Finland and the workshop was organized by the newly founded Software-intensive Business research community together with Software Startup Research Network (SSRN).
Business process models provide a considerable number of benefits for enterprises and organizations, but the creation of such models is costly and time-consuming, which slows down the organizational adoption of business process modeling. Social paradigms pave new ways for business process modeling by integrating stakeholders and leveraging knowledge sources. However, empirical research about the impact of social paradigms on costs of business process modeling is sparse. A better understanding of their impact could help to reduce the cost of business process modeling and improve decision-making on BPM activities. The paper constributes to this field by reporting about an empirical investigation via survey research on the perceived influence of different cost factors among experts. Our results indicate that different cost components, as well as the use of social paradigms, influence cost.
Social media usage in business-to-business sales : conceptualization, antecedents, and outcomes
(2015)
In recent years, the rise of social media received significant importance in marketing research. Social media applications now provide executives with a raft of new options. Consequently, interfaces to social media platforms have also been integrated into Business to-Business (B2B) salesforce applications, although very little is as yet known about their usage and general impact on B2B sales performance. This paper evaluates 1) the conceptualization of social media usage in a dyadic B2B relationship; 2) the effects of a more differentiated usage construct on customer satisfaction; 3) antecedents of social media usage on multiple levels; and 4) the effectiveness of social media usage for different types of customers. The framework presented here is tested cross-industry against data collected from dyadic buyer seller relationships in the IT service industry. The results elucidate the preconditions and the impact of social media usage strategies in B2B sales relations.
In recent years, the rise of social media received significant importance in marketing research and practice. Consequently, interfaces to social media platforms have also been integrated into Business-to-Business (B2B) salesforce applications, although very little is as yet known about their usage and general impact on B2B sales performance. This paper evaluates 1) the conceptualization of social media usage in dyadic B2B relationships; 2) the effects of a more differentiated usage construct on customer satisfaction; 3) antecedents of social media usage on multiple levels; and 4) the effectiveness of social media usage for different types of cus-tomers. The framework presented here is tested cross-industry against data collected from dyadic buyer-seller relationships in the IT service industry. The results elucidate the precondi-tions and the impact of social media usage strategies in B2B sales relations.
Diese Arbeit liefert einen Konzeptentwurf, der die Integration verschiedener Systeme mit prozessrelevanten klinischen Diensten gewährleistet. Chirurgische Abläufe werden in Form von Prozessen modelliert. Die Wahl der Notation und die Art der Modellierung dieser Prozesse spielt in der heutigen Forschung in diesem Gebiet eine zentrale Rolle. Sind diese Prozesse modelliert, besteht die Möglichkeit, diese in einer Workflow-Engine automatisiert auszuführen. Im Rahmen der Entwicklung eines Workflow-Managment-Systems stellt sich die Frage, wie die Anbindung dieser Workflow-Engine mit anderen Systemen erfolgen soll. In der Arbeit werden Schnittstellen abstrakt in der Web Services Description Language (WSDL) definiert. Darum werden automatisiert Artefakte erzeugt. Auf der Grundlage dieser Artefakte erfolgt die Integration der Systeme. Die Workflow-Engine kommunizieren über SOAP-Nachrichten (Simple Object Access Protocol) mit den entsprechenden Systemen. Dieser Ansatz wurde mithilfe eines Prototyps validiert und umgesetzt.
The digital transformation is today’s dominant business transformation having a strong influence on how digital services and products are designed in a service-dominant way. A popular underlying theory of value creation and economic exchange that is known as the service-dominant (S-D) logic can be connected to many successful digital business models. However, S-D logic by itself is abstract. Companies cannot directly use it as an instrument for business model innovation and design in an easy way. To address this a comprehensive ideation method based on S-D logic is proposed, called service-dominant design (SDD). SDD is aimed at supporting firms in the transition to a service- and value-oriented perspective. The method provides a simplified way to structure the ideation process based on four model components. Each component consists of practical implications, auxiliary questions and visualization techniques that were derived from a literature review, a use case evaluation of digital mobility and a focus group discussion. SDD represents a first step of having a toolset that can support established companies in the process of service- and value-orientation as part of their digital transformation efforts.
What might the attendee be able to do after being in your session?
Our work shows how to connect intra-operative devices via IEEE 11073 Service-oriented Device Connectivity (SDC).
Description of the Problem or Gap
Standardized device communication is essential for interoperability, availability of device data, and therefore for the intelligent operating room (OR) and arising solutions. The SDC standard was developed to make information from medical devices available in a uniform manner and enable interoperability. Existing devices are rarely SDC-capable and need interfaces to be interoperable via SDC.
Methods: What did you do to address the problem or gap?
We conceived an SDC-based architecture consisting of a service provider and service consumer. In our concept, the service provider is connected to the medical device and capable to translate the proprietary protocol of the device into SDC and vice versa. The service consumer is used to request or send information via the SDC protocol to the service provider and can function as a uniform bidirectional interface (e.g. for displaying or controlling). This concept was exemplarily demonstrated with the patient monitor MX800 of Philips to retrieve the device data (e.g. vital parameters) via SDC and partly for the operating light marLED X of KLS Martin Group.
Results: What was the outcome(s) of what you did to address the problem or gap?
The patient monitor MX800 was connected to a Raspberry Pi (RPi) via LAN, on which the service provider is running. The python script on the RPi establishes a connection to the monitor and translates incoming and outgoing messages from the proprietary protocol to SDC and vice versa to/from the service consumer. The service consumer is running on a laptop and acts as a simulation for different kinds of systems that want to get vital parameters or other information from the patient monitor. The operating light marLED X was connected to an RPi via USB-to-RS232. A python script on the RPi establishes a connection to the light and makes it possible via proprietary commands to get information of the light (e.g. status) and to control it (e.g. toggle the light, increment the intensity). A translation to SDC is not integrated yet.
Discussion of Results
Our practical implementation shows that medical devices can be accessed via external connections to get device data and control the device via commands. The example SDC implementation of the patient monitor MX800 makes it possible to request its data via the standardized communication protocol SDC. This is also possible for the operating light marLED X if its proprietary protocol is analyzed to be translatable to/from SDC. This would allow to control the device from an external system, or automatically depending on the status of the ongoing procedure. The advantage is, that existing intra-operative devices can be extended by a service provider which is capable of translating the proprietary protocol of the device in SDC and vice versa. This enables interoperability and an intelligent OR that, for example, is aware of all devices, their status, and data and can use this information to optimally support the surgeons and their team (e.g. provision of information, automated documentation). This interoperability allows that future innovations merely need to understand the SDC protocol instead of all vendor-dependent communication protocols.
Conclusion
Standardized device communication is essential to reach interoperability, and therefore intelligent ORs. Our contribution addresses the possibility of subsequently making medical devices SDC-capable. This may eliminate the need of understanding all the different proprietary protocols when developing new innovative solutions for the OR.
Scheduled flexibility and individualization of knowledge transfer in foundations of computer science
(2017)
The opening of the German higher education system for new target groups involves a heterogeneous composition of students as never before and face up the universities to new challenges. Due to different educational biographies, the students don't show a homogeneous level of knowledge. Furthermore, their access to course content and their individual learning methods are very diverse. The existing lack of knowledge and the very unequal study speed have a significant influence on the learning behavior and learning motivation. During the first semesters, the dropout rate is appreciably higher. The reform project gives an overview of a didactic restructuring from a formerly conventional teaching and learning concept to a stronger combination of digital offers, combined with classical lectures in the basic modules of computer science. The teaching content is adjusted to the individual requirements and knowledge. Students with different previous knowledge get the possibility to increase their knowledge in different levels of abstraction. The aim of the reform project has to point out the possibilities, also the challenges of the digital process in higher education. At the same time the question has to be explored, how far does an accompanied and self-directed learning in own speed and in own individual depth of knowledge have a positive impact on the motivation and on the study success of a learner.
Rotating machinery occupies a predominant place in many industrial applications. However, rotating machines are often encountered with severe vibration problems. The measurement of these machines’ vibrations signal is of particular importance since it plays a crucial role in predictive maintenance. When the vibrations are too high, they often cause fatigue failure. They announce an unexpected stop or break and, consequently, a significant loss of productivity or an attack on the personnel’s safety. Therefore, fault identification at early stages will significantly enhance the machine’s health and significantly reduce maintenance costs. Although considerable efforts have been made to master the field of machine diagnostics, the usual signal processing methods still present several drawbacks. This paper examines the rotating machinery condition monitoring in the time and frequency domains. It also provides a framework for the diagnosis process based on machine learning by analyzing the vibratory signals.
Die Erfindung betrifft einen Rollstuhl mit einem Gestell mit Rädern, einem Sitz sowie zwei gegenüber dem Sitz verlagerbaren Fußplatten und ein Trainingsgerät zur Bewegungstherapie der unteren Extremitäten einer in dem Rollstuhl sitzenden Person. Um das Trainingsgerät vereinfacht auszubilden, enthält das Trainingsgerät unabhängig von einer Fahrbewegung des Rollstuhls betreibbar eine an dem Gestell befestigbare, von einer Steuereinheit gesteuerte Elektromaschine, welche zur wechselweise erzwungenen Verlagerung der beiden Fußplatten mit den Fußplatten mechanisch gekoppelt ist.
46 Prozent der Arbeitsplätze in der Automobilindustrie sind bis 2030 durch Automatisierung und Digitalisierung bedroht – die Tätigkeiten werden dann nicht mehr von Menschen, sondern von intelligenten Robotern und Systemen erledigt. Das ist das zentrale Ergebnis unserer Studie „Digitale Transformation – Der Einfluss der Digitalisierung auf die Workforce in der Automobilindustrie“, die wir gemeinsam mit dem Herman Hollerith Lehr- und Forschungszentrum an der Hochschule Reutlingen erstellt haben.
Revenue management information systems are very important in the hospitality sector. Revenue decisions can be better prepared based on different information from different information systems and decision strategies. There is a lack of research about the usage of such systems in small and medium-sized hotels and architectural configurations. Our paper empirically shows the current development of revenue information systems. Furthermore, we define future developments and requirements to improve such systems and the architectural base.
The recovery of our body and brain from fatigue directly depends on the quality of sleep, which can be determined from the results of a sleep study. The classification of sleep stages is the first step of this study and includes the measurement of vital data and their further processing. The non-invasive sleep analysis system is based on a hardware sensor network of 24 pressure sensors providing sleep phase detection. The pressure sensors are connected to an energy-efficient microcontroller via a system-wide bus. A significant difference between this system and other approaches is the innovative way in which the sensors are placed under the mattress. This feature facilitates the continuous use of the system without any noticeable influence on the sleeping person. The system was tested by conducting experiments that recorded the sleep of various healthy young people. Results indicate the potential to capture respiratory rate and body movement.
Context: Currently, most companies apply approaches for product roadmapping that are based on the assumption that the future is highly predicable. However, nowadays companies are facing the challenge of increasing market dynamics, rapidly evolving technologies, and shifting user expectations. Together with the adaption of lean and agile practices it makes it increasingly difficult to plan and predict upfront which products, services or features will satisfy the needs of the customers. Therefore, they are struggling with their ability to provide product roadmaps that fit into dynamic and uncertain market environments and that can be used together with lean and agile software development practices.
Objective: To gain a better understanding of modern product roadmapping processes, this paper aims to identify suitable processes for the creation and evolution of product roadmaps in dynamic and uncertain market environments.
Method: We performed a Grey Literature Review (GLR) according to the guidelines from Garousi et al.
Results: 32 approaches to product roadmapping were identified. Typical characteristics of these processes are the strong connection between the product roadmap and the product vision, an emphasis on stakeholder alignment, the definition of business and customer goals as part of the roadmapping process, a high degree of flexibility with respect to reaching these goals, and the inclusion of validation activities in the roadmapping process. An overall goal of nearly all approaches is to avoid waste by early reducing development and business risks. From the list of the 32 approaches found, four representative roadmapping processes are described in detail.
Predictive maintenance information systems: the underlying conditions and technological aspects
(2020)
Predictive maintenance has the potential to improve the reliability of production and service provisioning. However, there is little knowledge about the proper implementation of predictive maintenance in research and practice. Therefore, we conducted a multi-case study and investigated underlying conditions and technological aspects for implementing a predictive maintenance system and where it leads to. We found that predictive maintenance initiatives are triggered by severe impacts of failures on revenue and profit. Furthermore, successful predictive maintenance initiatives require that pre-conditions are fulfilled: Data must be available and accessible. Very important is also the support by the management. We identified four factors important for the implementation of predictive maintenance. The integration of data is highly facilitated by Cloud-based mechanisms. The detection of events is enabled by advanced analytics. The execution of predictive maintenance operations is supported by data-driven process automation and visualization.
Public transport maps are typically designed in a way to support route finding tasks for passengers while they also provide an overview about stations, metro lines, and city-specific attractions. Most of those maps are designed as a static representation, maybe placed in a metro station or printed in a travel guide. In this paper we describe a dynamic, interactive public transport map visualization enhanced by additional views for the dynamic passenger data on different levels of temporal granularity. Moreover, we also allow extra statistical information in form of density plots, calendar-based visualizations, and line graphs. All this information is linked to the contextual metro map to give a viewer insights into the relations between time points and typical routes taken by the passengers. We illustrate the usefulness of our interactive visualization by applying it to the railway system of Hamburg in Germany while also taking into account the extra passenger data. As another indication for the usefulness of the interactively enhanced metro maps we conducted a user experiment with 20 participants.
This thesis studies concurrency control and composition of transactions in computing environments with long living transactions where local data autonomy of transactions is indispensable. This kind of computing architecture is referred to as a Disconnected System where reads are segregated -disconnected- from writes enabling local data autonomy. Disconnecting reads from writes is inspired by Bertrand Meyer's "Command Query Separation" pattern. This thesis provides a simple yet precise definition for a Disconnected System with a focus on transaction management. Concerning concurrency control, transaction management frameworks implement a'one concurrency control mechanism fits all needs strategy'. This strategy, however, does not consider specific characteristics of data access. The thesis shows the limitations of this strategy if transaction load increases, transactions are long lived, local data autonomy is required, and serializability is aimed at isolation level. For example, in optimistic mechanisms the number of aborts suddenly increases if load increases. In pessimistic mechanisms locking causes long blocking times and is prone to deadlocks. These findings are not new and a common solution used by database vendors is to reduce the isolation. This thesis proposes the usage of a novel approach. It suggests choosing the concurrency control mechanism according to the semantics of data access of a certain data item. As a result a transaction may execute under several concurrency control mechanisms. The idea is to introduce lanes similar to a motorway where each lane is dedicated to a certain class of vehicle with the same characteristics. Whereas disconnecting reads and writes sets the traffic's direction, the semantics of data access defines the lanes. This thesis introduces four concurrency control classes capturing the semantics of data access and each of them has an associated tailored concurrency control mechanism. Class O (the optimistic class) implements a first-committer-wins strategy, class R (the reconciliation class) implements a first-n-committers-win strategy, class P (the pessimistic class) implements a first-reader-wins strategy, and class E (the escrow class) implements a first-n-readers-win strategy. In contrast to solutions that adapt the concurrency control mechanism during runtime, the idea is to classify data during the design phase of the application and adapt the classification only in certain cases at runtime. The result of the thesis is a transaction management framework called O|R|P|E. A performance study based on the TPC-C benchmark shows that O|R|P|E has a better performance and a considerably higher commit rate than other solutions. Moreover, the thesis shows that in O|R|P|E aborts are due to application specific limitations, i.e., constraint violations and not due to serialization conflicts. This is a result of considering the semantics.