Informatik
Refine
Document Type
- Conference proceeding (567)
- Journal article (198)
- Book chapter (62)
- Doctoral Thesis (18)
- Book (10)
- Anthology (10)
- Patent / Standard / Guidelines (2)
- Report (2)
- Working Paper (2)
Is part of the Bibliography
- yes (871)
Institute
- Informatik (871)
- Technik (2)
Publisher
- Springer (173)
- Hochschule Reutlingen (104)
- IEEE (89)
- Gesellschaft für Informatik (60)
- Elsevier (46)
- ACM (33)
- IARIA (26)
- Springer Gabler (15)
- De Gruyter (12)
- Association for Information Systems (AIS) (11)
The field of breath analysis has developed to be of growing interest in medical diagnosis and patient monitoring. The main advantages are that it’s noninvasive, painless and repeatable in flexible cycles. Even though breath analysis is being researched for a couple of decades there are still many unanswered questions. Human breath contains volatile organic compounds which are emitted from inside the body. Some of these compounds can be assigned to specific sources, such as inflammation or cancer, but also to non health related origins. This paper gives an overview of breath analysis for the purpose of disease diagnosis and health monitoring. Therefore, literature regarding breath analysis in the medical field has been analyzed, from its early stages to the present. As a result, this paper gives an outline of the topic of breath analysis.
Over the last decades, a tremendous change toward using information technology in almost every daily routine of our lives can be perceived in our society, entailing an incredible growth of data collected day-by-day on Web, IoT, and AI applications.
At the same time, magneto-mechanical HDDs are being replaced by semiconductor storage such as SSDs, equipped with modern Non-Volatile Memories, like Flash, which yield significantly faster access latencies and higher levels of parallelism. Likewise, the execution speed of processing units increased considerably as nowadays server architectures comprise up to multiple hundreds of independently working CPU cores along with a variety of specialized computing co-processors such as GPUs or FPGAs.
However, the burden of moving the continuously growing data to the best fitting processing unit is inherently linked to today’s computer architecture that is based on the data-to-code paradigm. In the light of Amdahl's Law, this leads to the conclusion that even with today's powerful processing units, the speedup of systems is limited since the fraction of parallel work is largely I/O-bound.
Therefore, throughout this cumulative dissertation, we investigate the paradigm shift toward code-to-data, formally known as Near-Data Processing (NDP), which relieves the contention on the I/O bus by offloading processing to intelligent computational storage devices, where the data is originally located.
Firstly, we identified Native Storage Management as the essential foundation for NDP due to its direct control of physical storage management within the database. Upon this, the interface is extended to propagate address mapping information and to invoke NDP functionality on the storage device. As the former can become very large, we introduce Physical Page Pointers as one novel NDP abstraction for self-contained immutable database objects.
Secondly, the on-device navigation and interpretation of data are elaborated. Therefore, we introduce cross-layer Parsers and Accessors as another NDP abstraction that can be executed on the heterogeneous processing capabilities of modern computational storage devices. Thereby, the compute placement and resource configuration per NDP request is identified as a major performance criteria. Our experimental evaluation shows an improvement in the execution durations of 1.4x to 2.7x compared to traditional systems. Moreover, we propose a framework for the automatic generation of Parsers and Accessors on FPGAs to ease their application in NDP.
Thirdly, we investigate the interplay of NDP and modern workload characteristics like HTAP. Therefore, we present different offloading models and focus on an intervention-free execution. By propagating the Shared State with the latest modifications of the database to the computational storage device, it is able to process data with transactional guarantees. Thus, we achieve to extend the design space of HTAP with NDP by providing a solution that optimizes for performance isolation, data freshness, and the reduction of data transfers. In contrast to traditional systems, we experience no significant drop in performance when an OLAP query is invoked but a steady and 30% faster throughput.
Lastly, in-situ result-set management and consumption as well as NDP pipelines are proposed to achieve flexibility in processing data on heterogeneous hardware. As those produce final and intermediary results, we continue investigating their management and identified that an on-device materialization comes at a low cost but enables novel consumption modes and reuse semantics. Thereby, we achieve significant performance improvements of up to 400x by reusing once materialized results multiple times.
nKV in action: accelerating KVstores on native computational storage with NearData processing
(2020)
Massive data transfers in modern data intensive systems resulting from low data-locality and data-to-code system design hurt their performance and scalability. Near-data processing (NDP) designs represent a feasible solution, which although not new, has yet to see widespread use.
In this paper we demonstrate various NDP alternatives in nKV, which is a key/value store utilizing native computational storage and near-data processing. We showcase the execution of classical operations (GET, SCAN) and complex graph-processing algorithms (Betweenness Centrality) in-situ, with 1.4x-2.7x better performance due to NDP. nKV runs on real hardware - the COSMOS+ platform.
Massive data transfers in modern key/value stores resulting from low data-locality and data-to-code system design hurt their performance and scalability. Near-data processing (NDP) designs represent a feasible solution, which although not new, have yet to see widespread use.
In this paper we introduce nKV, which is a key/value store utilizing native computational storage and near-data processing. On the one hand, nKV can directly control the data and computation placement on the underlying storage hardware. On the other hand, nKV propagates the data formats and layouts to the storage device where, software and hardware parsers and accessors are implemented. Both allow NDP operations to execute in host-intervention-free manner, directly on physical addresses and thus better utilize the underlying hardware. Our performance evaluation is based on executing traditional KV operations (GET, SCAN) and on complex graph-processing algorithms (Betweenness Centrality) in-situ, with 1.4×-2.7× better performance on real hardware – the COSMOS+ platform.
Massive data transfers in modern data intensive systems resulting from low data-locality and data-to-code system design hurt their performance and scalability. Near-data processing (NDP) and a shift to code-to-data designs may represent a viable solution as packaging combinations of storage and compute elements on the same device has become viable.
The shift towards NDP system architectures calls for revision of established principles. Abstractions such as data formats and layouts typically spread multiple layers in traditional DBMS, the way they are processed is encapsulated within these layers of abstraction. The NDP-style processing requires an explicit definition of cross-layer data formats and accessors to ensure in-situ executions optimally utilizing the properties of the underlying NDP storage and compute elements. In this paper, we make the case for such data format definitions and investigate the performance benefits under NoFTL-KV and the COSMOS hardware platform.
Data analytics tasks on large datasets are computationally intensive and often demand the compute power of cluster environments. Yet, data cleansing, preparation, dataset characterization and statistics or metrics computation steps are frequent. These are mostly performed ad hoc, in an explorative manner and mandate low response times. But, such steps are I/O intensive and typically very slow due to low data locality, inadequate interfaces and abstractions along the stack. These typically result in prohibitively expensive scans of the full dataset and transformations on interface boundaries.
In this paper, we examine R as analytical tool, managing large persistent datasets in Ceph, a wide-spread cluster file-system. We propose nativeNDP – a framework for Near Data Processing that pushes down primitive R tasks and executes them in-situ, directly within the storage device of a cluster-node. Across a range of data sizes, we show that nativeNDP is more than an order of magnitude faster than other pushdown alternatives.
Modern persistent Key/Value stores are designed to meet the demand for high transactional throughput and high data ingestion rates. Still, they rely on backwards-compatible storage stack and abstractions to ease space management, foster seamless proliferation and system integration. Their dependence on the traditional I/O stack has negative impact on performance, causes unacceptably high write-amplification, and limits the storage longevity.
In the present paper we present NoFTL KV, an approach that results in a lean I/O stack, integrating physical storage management natively in the Key/Value store. NoFTL-KV eliminates backwards compatibility, allowing the Key/Value store to directly consume the characteristics of modern storage technologies. NoFTLKV is implemented under RocksDB. The performance evaluation under LinkBench shows that NoFTL-KV improves transactional throughput by 33%, while response times improve up to 2.3x. Furthermore, NoFTL KV reduces write-amplification 19x and improves storage longevity by imately the same factor.
Current data-intensive systems suffer from scalability as they transfer massive amounts of data to the host DBMS to process it there. Novel near-data processing (NDP) DBMS architectures and smart storage can provably reduce the impact of raw data movement. However, transferring the result-set of an NDP operation may increase the data movement, and thus, the performance overhead. In this paper, we introduce a set of in-situ NDP result-set management techniques, such as spilling, materialization, and reuse. Our evaluation indicates a performance improvement of 1.13 × to 400 ×.
Near-data processing in database systems on native computational storage under HTAP workloads
(2022)
Today’s Hybrid Transactional and Analytical Processing (HTAP) systems, tackle the ever-growing data in combination with a mixture of transactional and analytical workloads. While optimizing for aspects such as data freshness and performance isolation, they build on the traditional data-to-code principle and may trigger massive cold data transfers that impair the overall performance and scalability. Firstly, in this paper we show that Near-Data Processing (NDP) naturally fits in the HTAP design space. Secondly, we propose an NDP database architecture, allowing transactionally consistent in-situ executions of analytical operations in HTAP settings. We evaluate the proposed architecture in state-of-the-art key/value-stores and multi-versioned DBMS. In contrast to traditional setups, our approach yields robust, resource- and cost-effcient performance.
Rapidly growing data volumes push today's analytical systems close to the feasible processing limit. Massive parallelism is one possible solution to reduce the computational time of analytical algorithms. However, data transfer becomes a significant bottleneck since it blocks system resources moving data-to-code. Technological advances allow to economically place compute units close to storage and perform data processing operations close to data, minimizing data transfers and increasing scalability. Hence the principle of Near Data Processing (NDP) and the shift towards code-to-data. In the present paper we claim that the development of NDP-system architectures becomes an inevitable task in the future. Analytical DBMS like HPE Vertica have multiple points of impact with major advantages which are presented within this paper.
The amount of image data has been rising exponentially over the last decades due to numerous trends like social networks, smartphones, automotive, biology, medicine and robotics. Traditionally, file systems are used as storage. Although they are easy to use and can handle large data volumes, they are suboptimal for efficient sequential image processing due to the limitation of data organisation on single images. Database systems and especially column-stores support more stuctured storage and access methods on the raw data level for entiere series.
In this paper we propose definitions of various layouts for an efficient storage of raw image data and metadata in a column store. These schemes are designed to improve the runtime behaviour of image processing operations. We present a tool called column-store Image Processing Toolbox (cIPT) allowing to easily combine the data layouts and operations for different image processing scenarios.
The experimental evaluation of a classification task on a real world image dataset indicates a performance increase of up to 15x on a column store compared to a traditional row-store (PostgreSQL) while the space consumption is reduced 7x. With these results cIPT provides the basis for a future mature database feature.
Software is an integrated part of new features within the automotive sector, car manufacturers, the Hersteller Initiative Software (HIS) consortium defined metrics to determine software quality. Yet, problems with assigning metrics to quality attributes often occur in practice. The specified boundary values lead to discussions between contractors and clients as different standards and metric sets are used. This paper studies metrics used in the automotive sector and the quality attributes they address. The HIS, ISO/IEC 25010:2011, and ISO/IEC 26262:2018 are utilized to draw a big picture illustrating (i) which metrics and boundary values are reported in literature, (ii) how the metrics match the standards, (iii) which quality attributes are addressed, and (iv) how the metrics are supported by tools. Our findings from analyzing 38 papers include a catalog of 112 metrics of which 17 define boundary values and 48 are supported by tools. Most of the metrics are concerned with source code, are generic, and not specifically designed for automotive software development. We conclude that many metrics exist, but a clear definition of the metrics' context, notably regarding the construction of flexible and efficient measurement suites, is missing.
Product roadmaps in the new mobility domain: state of the practice and industrial experiences
(2021)
Context: The New Mobility industry is a young market that includes high market dynamics and is therefore associated with a high degree of uncertainty. Traditional product roadmapping approaches such a detailed planning of features over a long-time horizon typically fail in such environments. For this reason, companies that are active in the field of New Mobility are faced with the challenge of keeping their product roadmaps reliable for stakeholders while at the same time being able to react flexibly to changing market requirements.
Objective: The goal of this paper is to identify the state of practice regarding product roadmapping of New Mobility companies. In addition, the related challenges within the product roadmapping process as well as the success factors to overcome these challenges will be highlighted.
Method: We conducted semi-structured expert interviews with 8 experts (7 German company and one Finnish company) from the field of New Mobility and performed a content analysis.
Results: Overall the results of the study showed that the participating companies are aware of the requirements that the New Mobility sector entails. Therefore, they exhibit a high level of maturity in terms of product roadmapping. Nevertheless, some aspects were revealed that pose specific challenges for the participating companies. One major challenge, for example, is that New Mobility in terms of public clients is often a tender business with non-negotiable product requirements. Thus, the product roadmap can be significantly influenced from the outside. As factors for a successful product roadmapping mainly soft factors such as trust between all people involved in the product development process and transparency throughout the entire roadmapping process were mentioned.
Software scripts for sensor data extraction in Rasberry Pi: user-space and kernel-space comparison
(2024)
This paper compares two popular scripting implementations for hardware prototyping: Python scripts execut from User-Space and C-based Linux-Driver processes executed from Kernel-Space, which can provide information to researchers when considering one or another in their implementations. Conclusions exhibit that deploying software scripts in the kernel space makes it possible to grant a certain quality of sensor information using a Raspberry Pi without the need for advanced real-time operational systems.
Development of an expert system to overpass citizens technological barriers on smart home and living
(2023)
Adopting new technologies can be overwhelming, even for people with experience in the field. For the general public, learning about new implementations, releases, brands, and enhancements can cause them to lose interest. There is a clear need to create point sources and platforms that provide helpful information about the novel and smart technologies, assisting users, technicians, and providers with products and technologies. The purpose of these platforms is twofold, as they can gather and share information on interests common to manufacturers and vendors. This paper presents the ”Finde-Dein-SmartHome” tool. Developed in association with the Smart Home & Living competence center [5] to help users learn about, understand, and purchase available technologies that meet their home automation needs. This tool aims to lower the usability barrier and guide potential customers to clear their doubts about privacy and pricing. Communities can use the information provided by this tool to identify market trends that could eventually lower costs for providers and incentivize access to innovative home technologies and devices supporting long-term care.
Background
Personalized medicine requires the integration and analysis of vast amounts of patient data to realize individualized care. With Surgomics, we aim to facilitate personalized therapy recommendations in surgery by integration of intraoperative surgical data and their analysis with machine learning methods to leverage the potential of this data in analogy to Radiomics and Genomics.
Methods
We defined Surgomics as the entirety of surgomic features that are process characteristics of a surgical procedure automatically derived from multimodal intraoperative data to quantify processes in the operating room. In a multidisciplinary team we discussed potential data sources like endoscopic videos, vital sign monitoring, medical devices and instruments and respective surgomic features. Subsequently, an online questionnaire was sent to experts from surgery and (computer) science at multiple centers for rating the features’ clinical relevance and technical feasibility.
Results
In total, 52 surgomic features were identified and assigned to eight feature categories. Based on the expert survey (n = 66 participants) the feature category with the highest clinical relevance as rated by surgeons was “surgical skill and quality of performance” for morbidity and mortality (9.0 ± 1.3 on a numerical rating scale from 1 to 10) as well as for long-term (oncological) outcome (8.2 ± 1.8). The feature category with the highest feasibility to be automatically extracted as rated by (computer) scientists was “Instrument” (8.5 ± 1.7). Among the surgomic features ranked as most relevant in their respective category were “intraoperative adverse events”, “action performed with instruments”, “vital sign monitoring”, and “difficulty of surgery”.
Conclusion
Surgomics is a promising concept for the analysis of intraoperative data. Surgomics may be used together with preoperative features from clinical data and Radiomics to predict postoperative morbidity, mortality and long-term outcome, as well as to provide tailored feedback for surgeons.
Turning students into Industry 4.0 entrepreneurs: design and evaluation of a tailored study program
(2022)
Startups in the field of Industry 4.0 could be a huge driver of innovation for many industry sectors such as manufacturing. However, there is a lack of education programs to ensure a sufficient number of well-trained founders and thus a supply of such startups. Therefore, this study presents the design, implementation, and evaluation of a university course tailored to the characteristics of Industry 4.0 entrepreneurship. Educational design-based research was applied with a focus on content and teaching concept. The study program was first implemented in 2021 at a German university of applied sciences with 25 students, of which 22 participated in the evaluation. The evaluation of the study program was conducted with a pretest–posttest-design targeting three areas: (1) knowledge about the application domain, (2) entrepreneurial intention and (3) psychological characteristics. The entrepreneurial intention was measured based on the theory of planned behavior. For measuring psychological characteristics, personality traits associated with entrepreneurship were used. Considering the study context and the limited external validity of the study, the following can be identified in particular: The results show that a university course can improve participants' knowledge of this particular area. In addition, perceived behavioral control of starting an Industry 4.0 startup was enhanced. However, the results showed no significant effects on psychological characteristics.
Context: The manufacturing industry is facing a transformation with regard to Industry 4.0 (I4). A transformation towards full automation of production including a multitude of innovations is necessary. Startups and entrepreneurial processes can support such a transformation as has been shown in other industries. However, I4 has some specifics, so it is unclear how entrepreneurship can be adapted in I4. Understanding these specifics is important to develop suitable training programs for I4 startups and to accelerate the transformation.
Objective: This study identifies and outlines the essential characteristics and constraints of entrepreneurial processes in I4.
Method: 14 semi-structured interviews were conducted with experts in the field of I4 entrepreneurship. The interviews were analysed and categorized by qualitative analyses.
Results: The interviews revealed several characteristics of I4 that have a significant impact on the various phases of the entrepreneurial process. Examples of such specifics include the difficult access to customers, the necessary deep understanding of the customer and the domain, the difficulty of testing risky assumptions, and the complex development and productization of solutions. The complexity of hardware and software components, cost structures, and necessary customer-specific customizations affect the scalability of I4 startups. These essential characteristics also require specialised skills and resources from I4 startups.
Two Stream Hypothesis: Adaptationseffekte bei sozialen Interaktionen mit Avataren in Virtual Reality
(2015)
In diesem Paper wird ein Experiment zur Two-Streams-Hypothese vorgestellt. Dabei werden zunächst die psychologischen und technischen Grundlagen erarbeitet, welche für das Experiment benötigt werden. Anschließend wird die Forschungsfrage definiert und der Versuchsaufbau erörtert. Im Experiment soll getestet werden, ob es unterschiedliche Adaptationseffekte bei der Erkennung und dem Ausführen von nicht-eindeutigen sozialen Handlungen gibt. Es wird ein Versuchsaufbau entwickelt, bei welchem Probanden entweder aktiv durch komplementäre Handlungen auf die Handlungen von virtuellen Avataren reagieren sollen oder passiv durch das Drücken von Buttons. Abschließend werden die Ergebnisse ausgewertet und ein Fazit
gezogen.
In dieser Ausarbeitung geht es um den aktuellen Stand der Digitalisierung der Textilindustrie. Sie dient als Grundlage zur Master-Thesis und soll die Frage beantworten, ob ein Informations-System, das die Textilprozesskette begleitet, benötigt wird. Dazu werden die einzelnen Prozessschritte kurz erläutert. In der Ausarbeitung wird auch die Verbindung zwischen der Textilindustrie und den neuen Möglichkeiten mit dem Internet der Dinge beleuchtet.
How to protect the skin from getting sun burnt? The sun can damage your skin e.g. skin cancer. But the sun has a positive effect to the human. The time in sun and the intensity are key values between enjoy the sunbath and having a negative effect to the skin. A smart device like a UV flower could help you to enjoy the sunbath. It measures the UV index around you and gives this information to a smartphone app. The development steps of such a device are described in this paper. The UV flower is made of textile fabrics.
Functionally impaired people have problems with choosing and finding the right clothing. So, they need help in their daily life to wash and manage the clothing. The goal of this work is to support the user by giving recommendations to choose the right clothing, to find the clothing and how to wash the clothing. The idea behind eKlarA is to generate a gateway based system that uses sensors to identify the clothing and their state in the clothing cycle. The clothing cycle consists of (one and more) closet, laundry basket and washing machine in one or several places. The gateway uses the information about the clothing, weather and calendar to support the user in the different steps of the clothing cycle. This allows to give more freedom to the functionally impaired people in their daily life.
Being able to monitor the heart activity of patients during their daily life in a reliable, comfortable and affordable way is one main goal of the personalized medicine. Current wearable solutions lack either on the wearing comfort, the quality and type of the data provided or the price of the device. This paper shows the development of a Textile Sensor Platform (TSP) in the form of an electrocardiogram (ECG)-measuring T-shirt that is able to transmit the ECG signal to a smartphone. The development process includes the selection of the materials, the design of the textile electrodes taking into consideration their electrical characteristics and ergonomy, the integration of the electrodes on the garment and their connection with the embedded electronic part. The TSP is able to transmit a real-time streaming of the ECG-signal to an Android smartphone through Bluetooth Low Energy (BLE). Initial results show a good electrical quality in the textile electrodes and promising results in the capture and transmission of the ECG signal. This is still a working- progress and it is the result of an interdisciplinary master project between the School of Informatics and the School of Textiles & Design of the Reutlingen University.
A lot of people need help in their daily life to wash, select and manage their clothing. The goal of this work is to design an assistant system (eKlarA) to support the user by giving recommendations to choose the clothing combinations, to find the clothing and to wash the clothing. The idea behind eKlarA is to generate a system that uses sensors to identify the clothing and their state in the clothing cycle. The clothing cycle consists of the stations: closets, laundry basket and washing machine in one or several places. The system uses the information about the clothing, weather and calendar to support the user in the different steps of the clothing cycle. The first prototype of this system has been developed and tested. The test results are presented in this work.
This paper presents a generic method to enhance performance and incorporate temporal information for cardiorespiratory-based sleep stage classification with a limited feature set and limited data. The classification algorithm relies on random forests and a feature set extracted from long-time home monitoring for sleep analysis. Employing temporal feature stacking, the system could be significantly improved in terms of Cohen’s κ and accuracy. The detection performance could be improved for three classes of sleep stages (Wake, REM, Non-REM sleep), four classes (Wake, Non-REM-Light sleep, Non-REM Deep sleep, REM sleep), and five classes (Wake, N1, N2, N3/4, REM sleep) from a κ of 0.44 to 0.58, 0.33 to 0.51, and 0.28 to 0.44 respectively by stacking features before and after the epoch to be classified. Further analysis was done for the optimal length and combination method for this stacking approach. Overall, three methods and a variable duration between 30 s and 30 min have been analyzed. Overnight recordings of 36 healthy subjects from the Interdisciplinary Center for Sleep Medicine at Charité-Universitätsmedizin Berlin and Leave-One-Out-Cross-Validation on a patient-level have been used to validate the method.
There have been substantial research efforts for algorithms to improve continuous and automated assessment of various health-related questions in recent years. This paper addresses the deployment gap between those improving algorithms and their usability in care and mobile health applications. In practice, most algorithms require significant and founded technical knowledge to be deployed at home or support healthcare professionals. Therefore, the digital participation of persons in need of health care professionals lacks a usable interface to use the current technological advances. In this paper, we propose applying algorithms taken from research as web-based microservices following the common approach of a RESTful service to bridge the gap and make algorithms accessible to caregivers and patients without technical knowledge and extended hardware capabilities. We address implementation details, interpretation and realization of guidelines, and privacy concerns using our self-implemented example. Also, we address further usability guidelines and our approach to those.
Near-Data Processing is a promising approach to overcome the limitations of slow I/O interfaces in the quest to analyze the ever-growing amount of data stored in database systems. Next to CPUs, FPGAs will play an important role for the realization of functional units operating close to data stored in non-volatile memories such as Flash.It is essential that the NDP-device understands formats and layouts of the persistent data, to perform operations in-situ. To this end, carefully optimized format parsers and layout accessors are needed. However, designing such FPGA-based Near-Data Processing accelerators requires significant effort and expertise. To make FPGA-based Near-Data Processing accessible to non-FPGA experts, we will present a framework for the automatic generation of FPGA-based accelerators capable of data filtering and transformation for key-value stores based on simple data-format specifications.The evaluation shows that our framework is able to generate accelerators that are almost identical in performance compared to the manually optimized designs of prior work, while requiring little to no FPGA-specific knowledge and additionally providing improved flexibility and more powerful functionality.
Massive data transfers in modern data-intensive systems resulting from low data-locality and data-to-code system design hurt their performance and scalability. Near-Data processing (NDP) and a shift to code-to-data designs may represent a viable solution as packaging combinations of storage and compute elements on the same device has become feasible. The shift towards NDP system architectures calls for revision of established principles. Abstractions such as data formats and layouts typically spread multiple layers in traditional DBMS, the way they are processed is encapsulated within these layers of abstraction. The NDP-style processing requires an explicit definition of cross-layer data formats and accessors to ensure in-situ executions optimally utilizing the properties of the underlying NDP storage and compute elements. In this paper, we make the case for such data format definitions and investigate the performance benefits under RocksDB and the COSMOS hardware platform.
Durch das stetige Wachstum an neuen Technologien und Möglichkeiten steht der Verschmelzung von Technologien mit dem Menschen kaum noch etwas im Wege. Die Untersuchung der Implantate und die damit verbundenen Risiken sind ein Teil dieser Arbeit. Von Bedeutung sind hier die Funktionsweise und die IT-Sicherheitsaspekte. Alle in dieser Arbeit dargestellten Implantate benötigen eine Kommunikation nach außen. Diese Kommunikationsmöglichkeit birgt Risiken, die nicht nur auf die Daten der Träger beschränkt sind, sondern auch gesundheitliche Risiken beinhalten.
Beim Language Oriented Programming (LOP) erstellt der Entwickler eine Programmiersprache, um ein Problem oder eine Aufgabe in einer bestimmten Domäne zu lösen. Dabei wird die Sprache so entwickelt, dass sie das konzeptuelle Modell des Entwicklers ohne Umdenken umsetzen kann. Diese Sprachen nennt man domänenspezifische Sprachen (DSL). Zur Entwicklung dieser Sprachen werden sogenannte Language Workbenches (LWB) verwendet. Diese Arbeit befasst sich mit der Entwicklung von DSLs als ein Mittel zur Umsetzung von LOP. Durch die Nutzung der LWBs kann man DSLs mit relativ kleinem Aufwand erstellen und einsetzen. Im Fokus dieser Arbeit steht die Entwicklung von "Modularen DSLs". Hierbei werden Kriterien und Voraussetzungen für die Modularisierung betrachtet. Zum Abschluss werden drei Konzepte bestehender Systeme anhand dieser Kriterien betrachtet und bewertet.
We investigated the influence of body shape and pose on the perception of physical strength and social power for male virtual characters. In the first experiment, participants judged the physical strength of varying body shapes, derived from a statistical 3D body model. Based on these ratings, we determined three body shapes (weak, average, and strong) and animated them with a set of power poses for the second experiment. Participants rated how strong or powerful they perceived virtual characters of varying body shapes that were displayed in different poses. Our results show that perception of physical strength was mainly driven by the shape of the body. However, the social attribute of power was influenced by an interaction between pose and shape. Specifically, the effect of pose on power ratings was greater for weak body shapes. These results demonstrate that a character with a weak shape can be perceived as more powerful when in a high-power pose.
Adoption of artificial intelligence (AI) has risen sharply in recent years but many firms are not successful in realising the expected benefits or even terminate projects before completion. While there are a number of previous studies that highlight challenges in AI projects, critical factors that lead to project failure are mostly unknown. The aim of this study is therefore to identify distinct factors that are critical for failure of AI projects. To address this, interviews with experts in the field of AI from different industries are conducted and the results are analyzed using qualitative analysis methods. The results show that both, organizational and technological issues can cause project failure. Our study contributes to knowledge by reviewing previously identified challenges in terms of their criticality for project failure based on new empirical data, as well as, by identifying previously unknown factors.
Mobile apps for sustainability in grocery shopping: increasing acceptance through gameification
(2022)
Sustainability has become an important topic in social sciences research as well as in the societal debate. Research in general indicates a high sensitivity of sustainability issues in broad parts of the society, however a change of consumption habits can hardly be overserved. It can be argued that technology, such as mobile apps, can play an important role to increase more sustainable behaviors and consumption habits, as they facilitate such behaviors, bring transparency to an unclear field and reduce complexity. Our research hence approaches an important research gap, especially as currently existing apps show a lack of functionalities and UX. By using a Design Science Research (DSR) approach applying Chou’s Octalysis framework, we systematically analyzed eight apps in the field of sustainability and two general gamification apps as reference points complementing our findings with issues discussed in literature and could identify a broad range of functionalities. This comprehensive analysis allowed us to develop an initial mockup of a potential app, which then was tested within a user-group of ten users by using a semi structured interview approach. Our findings contribute to knowledge by highlighting the importance of user experience on the acceptance of mobile apps, as well as, by showcasing how gamification can contribute to a sustained use of mobile apps in this specific context.
Software Process Improvement (SPI) programs have been implemented, inter alia, to improve quality and speed of software development. SPI addresses many aspects ranging from individual developer skills to entire organizations. It comprises, for instance, the optimization of specific activities in the software lifecycle as well as the creation of organizational awareness and project culture. In the course of conducting a systematic mapping study on the state-of-the-art in SPI from a general perspective, we observed Software Quality Management (SQM) being of certain relevance in SPI programs. In this paper, we provide a detailed investigation of those papers from the overall systematic mapping study that were classified as addressing SPI in the context of SQM (including testing). From the main study’s result set, 92 papers were selected for an in-depth systematic review to study the contributions and to develop an initial picture of how these topics are addressed in SPI. Our findings show a fairly pragmatic contribution set in which different solutions are proposed, discussed, and evaluated. Among others, our findings indicate a certain reluctance towards standard quality or (test) maturity models and a strong focus on custom review, testing, and documentation techniques, whereas a set of five selected improvement measures is almost equally addressed.
Workflow driven support systems in the peri-operative area have the potential to optimize clinical processes and to allow new situation-adaptive support systems. We started to develop a workflow management system supporting all involved actors in the operating theatre with the goal to synchronize the tasks of the different stakeholders by giving relevant information to the right team members. Using the OMG standards BPMN, CMMN and DMN gives us the opportunity to bring established methods from other industries into the medical field. The system shows each addressed actor their information in the right place at the right time to make sure every member can execute their task in time to ensure a smooth workflow. The system has the overall view of all tasks. Accordingly, a workflow management system including the Camunda BPM workflow engine to run the models, and a middleware to connect different systems to the workflow engine and some graphical user interfaces to show necessary information or to interact with the system are used. The complete pipeline is implemented with a RESTful web service. The system is designed to include different systems like hospital information system (HIS) via the RESTful web service very easily and without loss of data. The first prototype is implemented and will be expanded.
An operation room is a stressful work environment. Nevertheless, all involved persons have to work safely as there is no space for making mistakes. To ensure a high level of concentration and seamless interaction, all involved persons have to know their own tasks and tasks of their colleagues. The entire team must work synchronously at all times. However, the operation room (OR) is a noisy environment and the actors have to set their focus on their work. To optimize the overall workflow, a task manager supporting the team was developed. Each actor is equipped with a client terminal showing a summary of their own tasks. Moreover, a big screen displays all tasks of all actors. The architecture is a distributed system based on a communication framework that supports the interaction of all clients with the task manager. A prototype of the task manager and several clients have been developed and implemented. The system represents a proof-of-concept for further development. This paper describes the concept of the task manager.
Information systems, which support the workflow in the clinical area, are currently limited to organizational processes. This work shows a first approach of an information system supporting all actors in the perioperative area. The first prototype and proof of concept was a task manager, giving all actors information about their task and the task of all other actors during an intervention. Based on this initial task manager, we implemented an information system based on a workflow engine controlling all processes and all information necessary for the intervention. A second part was the development of a perioperative process visualization which was developed based on a user centered approach jointly with clinicians and OR members.
Informationstechnische Systeme, die den Arbeitsablauf im klinischen Bereich unterstützen, sind aktuell auf organisatorische Abläufe beschränkt. Diese Arbeit stellt einen ersten Ansatz vor, wie solch ein System in den perioperativen Bereich eingebracht werden kann. Hierzu wurde eine Workflow Engine mit einer perioperativen Prozess-Visualisierung verknüpft. Das System wurde nach Modell-View-Controller-Prinzip implementiert. Als "Controller" kommt die Workflow Engine zum Einsatz; also "Modell" ein Prozessmodell, mit den erforderlichen klinischen Daten. Der "View" wurde durch eine abgekoppelte Anwendung realisiert, welche auf Web-Technologien basiert. Drei Visualisierungen, die Workflow Engine sowie die Anbindung beider über eine Datenbankschnittstelle, wurden erfolgreich umgesetzt. Bei den drei Visualisierungen wurden jeweils eine Ansicht für den OP-Koordinator, den Springer und eine Ansicht für die Übersicht einer OP erstellt.
Purpose: Medical processes can be modeled using different methods and notations.Currently used modeling systems like Business Process Model and Notation (BPMN) are not capable of describing the highly flexible and variable medical processes in sufficient detail.
Methods: We combined two modeling systems, Business Process Management (BPM) and Adaptive Case Management (ACM), to be able to model non-deterministic medical processes. We used the new Standards Case Management Model and Notation (CMMN) and Decision Management Notation (DMN).
Results: First, we explain how CMMN, DMN and BPMN could be used to model non-deterministic medical processes. We applied this methodology to model 79 cataract operations provided by University Hospital Leipzig, Germany, and four cataract operations provided by University Eye Hospital Tuebingen, Germany. Our model consists of 85 tasks and about 20 decisions in BPMN. We were able to expand the system with more complex situations that might appear during an intervention.
Conclusion: An effective modeling of the cataract intervention is possible using the combination of BPM and ACM. The combination gives the possibility to depict complex processes with complex decisions. This combination allows a significant advantage for modeling perioperative processes.
Diese Arbeit liefert einen Konzeptentwurf, der die Integration verschiedener Systeme mit prozessrelevanten klinischen Diensten gewährleistet. Chirurgische Abläufe werden in Form von Prozessen modelliert. Die Wahl der Notation und die Art der Modellierung dieser Prozesse spielt in der heutigen Forschung in diesem Gebiet eine zentrale Rolle. Sind diese Prozesse modelliert, besteht die Möglichkeit, diese in einer Workflow-Engine automatisiert auszuführen. Im Rahmen der Entwicklung eines Workflow-Managment-Systems stellt sich die Frage, wie die Anbindung dieser Workflow-Engine mit anderen Systemen erfolgen soll. In der Arbeit werden Schnittstellen abstrakt in der Web Services Description Language (WSDL) definiert. Darum werden automatisiert Artefakte erzeugt. Auf der Grundlage dieser Artefakte erfolgt die Integration der Systeme. Die Workflow-Engine kommunizieren über SOAP-Nachrichten (Simple Object Access Protocol) mit den entsprechenden Systemen. Dieser Ansatz wurde mithilfe eines Prototyps validiert und umgesetzt.
The evolution of Services Oriented Architectures (SOA) presents many challenges due to their complex, dynamic and heterogeneous nature. We describe how SOA design principles can facilitate SOA evolvability and examine several approaches to support SOA evolution. SOA evolution approaches can be classified based on the level of granularity they address, namely, service code level, service interaction level and model level. We also discuss emerging trends, such as microservices and knowledge-based support, which can enhance the evolution of future SOA systems.
The metric and qualitative analysis of models of the upper and lower dental arches is an important aspect of orthodontic treatment planning. Currently available eLearning systems for dental education only allow access to digital learning materials, and do not interactively support the learning progress. Moreover, to date no study compared the efficiency of learning methods based on physical or digital study models. For this pilot study, 18 dental students were separated into two groups to investigate whether the learning success in study model analysis with an interactive elearning system is higher based on digital models or on conventional plaster models. The results show that with the digital method less time is needed per model analysis. Moreover, the digital approach leads to higher total scores than that based on plaster models. We conclude that interactive eLearning using digital dental arch models is a promising tool for dental education.
Die Simulation menschlichen Gruppenverhaltens kann bei der Kapazitäten-, Risiko- und Evakuierungs Planung von Gebäuden hilfreich sein, bei der Produktion von Filmen für eindrucksvolle Massen-Szenen eingesetzt werden oder virtuelle Schauplätze in Echtzeit-Anwendungen beleben. Die Herausforderungen liegen vor allem in einem realistischen Erscheinungsbild der virtuellen Crowd, glaubwürdigem Verhalten innerhalb eines sozialen Verbundes, realitätsnahen Animationen und der Wahrung der Echtzeitfähigkeit interaktiver Anwendungen. Im Rahmen dieser Arbeit wird der aktuelle Stand der Technik vorgestellt, Technologien evaluiert und ein Crowd Simulation Prototyp mit der Unity Engine implementiert.
Continuous refactoring is necessary to maintain source code quality and to cope with technical debt. Since manual refactoring is inefficient and error prone, various solutions for automated refactoring have been proposed in the past. However, empirical studies have shown that these solutions are not widely accepted by software developers and most refactorings are still performed manually. For example, developers reported that refactoring tools should support functionality for reviewing changes. They also criticized that introducing such tools would require substantial effort for configuration and integration into the current development environment.
In this paper, we present our work towards the Refactoring-Bot, an autonomous bot that integrates into the team like a human developer via the existing version control platform. The bot automatically performs refactorings to resolve code smells and presents the changes to a developer for asynchronous review via pull requests. This way, developers are not interrupted in their workflow and can review the changes at any time with familiar tools. Proposed refactorings can then be integrated into the code base via the push of a button. We elaborate on our vision, discuss design decisions, describe the current state of development, and give an outlook on planned development and research activities.
Context: Companies need capabilities to evaluate the customer value of software intensive products and services. One way of systematically acquiring data on customer value is running continuous experiments as part of the overall development process. Objective: This paper investigates the first steps of transitioning towards continuous experimentation in a large company, including the challenges faced. Method: We conduct a single-case study using participant observation, interviews, and qualitative analysis of the collected data. Results: Results show that continuous experimentation was well received by the practitioners and practising experimentation helped them to enhance understanding of their product value and user needs. Although the complexities of a large multi-stakeholder business to-business (B2B) environment presented several challenges such as inaccessible users, it was possible to address impediments and integrate an experiment in an ongoing development project. Conclusion: Developing the capability for continuous experimentation in large organisations is a learning process which can be supported by a systematic introduction approach with the guidance of experts. We gained experience by introducing the approach on a small scale in a large organisation, and one of the major steps for future work is to understand how this can be scaled up to the whole development organisation.
Introducing continuous experimentation in large software-intensive product and service organisations
(2017)
Software development in highly dynamic environments imposes high risks to development organizations. One such risk is that the developed software may be of only little or no value to customers, wasting the invested development efforts.Continuous experiment ation, as an experiment-driven development approach, may reduce such development risks by iteratively testing product and service assumptions that are critical to the success of the software. Although several experiment-driven development approaches are available, there is little guidance available on how to introduce continuous experimentation into an organization. This article presents a multiple-case study that aims at better understanding the process of introducing continuous experimentation into an organization with an already established development process. The results from the study show that companies are open to adopting such an approach and learning throughout the introduction process. Several benefits were obtained, such as reduced development efforts, deeper customer insights, and better support for development decisions. Challenges included complex stakeholder structures, difficulties in defining success criteria, and building experimen- tation skills. Our findings indicate that organizational factors may limit the benefits of experimentation. Moreover, introducing continuous experimentation requires fundamental changes in how companies operate, and a systematic introduction process can increase the chances of a successful start.
Saving energy and protecting the environment became fundamental for society and politics, why several laws were enacted to increase the energy-efficiency. Furthermore, the growing number of vehicles and drivers leaded to more accidents and fatalities on the roads, why road safety became an important factor as well. Due to the increasing importance of energy-efficiency and safety, car manufacturers started to optimise the vehicle in terms of energy-effciency and safety. However, energy-efficiency and road safety can be also increased by adapting the driving behaviour to the given driving situation. This thesis presents a concept of an adaptive and rule based driving system that tries to educate the driver in energy-efficient and safe driving by showing recommendations on time. Unlike existing driving-systems, the presented driving system considers energy-efficiency and safety relevant driving rules, the individual driving behaviour and the driver condition. This allows to avoid the distraction of the driver and to increase the acceptance of the driving system, while improving the driving behaviour in terms of energy-efficiency and safety. A prototype of the driving system was developed and evaluated. The evaluation was done on a driving simulator using 42 test drivers, who tested the effect of the driving system on the driving behaviour and the effect of the adaptiveness of the driving system on the user acceptance. It has been proven during the evaluation that the energy-efficiency and safety can be increased, when the driving system was used. Furthermore, it has been proven that the user acceptance of the driving system increases when the adaptive feature was turned on. A high user acceptance of the driving system allows a steady usage of the driving system and, thus, a steady improvement of the driving behaviour in terms of energy-efficiency and safety.
Besides the optimisation of the car, energy-efficiency and safety can also be increased by optimising the driving behaviour. Based on this fact, a driving system is in development whose goal is to educate the driver in energy-efficient and safe driving. It monitors the driver, the car and the environment and gives energy-efficiency and safety relevant recommendations. However, the driving system tries not to distract or bother the driver by giving recommendations for example during stressful driving situations or when the driver is not interested in that recommendation. Therefore, the driving system monitors the stress level of the driver as well as the reaction of the driver to a given recommendation and decides whether to give a recommendation or not. This allows to suppress recommendations when needed and, thus, to increase the road safety and the user acceptance of the driving system.
Saving energy and road safety became important in the last decades, hence several driving assistant systems were developed that help to improve the driving behaviour. However, these driving systems cover the area of either energy-efficiency or safety. Furthermore, they do not consider the reaction of the driver to a shown recommendation and the driver stress level. In this paper, the decision process of showing a recommendation to the driver in an energy-efficient and safety relevant driving system is presented. The decision process considers the driver's reaction to a shown recommendation and the driver stress in order to increase the user acceptance and the road safety. The results of the evaluation showed that the driving system was able to show recommendations when needed, while suppressing recommendations when the driver ignored a recommendation repeatedly or when the driver was in stress.
Besides the optimisation of the car, energy-efficiency and safety can also be increased by optimising the driving behaviour. Based on this fact, a driving system is in development whose goal is to educate the driver in energy efficient and safe driving. It monitors the driver, the car and the environment and gives energy-efficiency and safety relevant recommendations. However, the driving system tries not to distract or bother the driver by giving recommendations for example during stressful driving situations or when the driver is not interested in that recommendation. Therefore, the driving system monitors the stress level of the driver as well as the reaction of the driver to a given recommendation and decideswhether to give a recommendation or not. This allows to suppress recommendations when needed and, thus, to increase the road safety and the user acceptance of
the driving system.