Informatik
Refine
Document Type
- Conference proceeding (569) (remove)
Is part of the Bibliography
- yes (569)
Institute
- Informatik (569)
- Technik (2)
Publisher
- Springer (115)
- Hochschule Reutlingen (102)
- IEEE (83)
- Gesellschaft für Informatik (49)
- ACM (31)
- IARIA (19)
- Association for Information Systems (AIS) (12)
- RWTH Aachen (11)
- Deutsche Gesellschaft für Computer- und Roboterassistierte Chirurgie e.V. (9)
- SCITEPRESS (8)
This study is about estimating the reproducibility of finding palpation points of three different anatomical landmarks in the human body (Xiphoid Process and the 2 Hip Crests) to support a navigated ultrasound application. On 6 test subjects with different body mass index the three palpation points were located five times by two examiners. The deviation from the target position was calculated and correlated to the fat thickness above each palpation point. The reproducibility of the measurements had a mean error of ≈13.5 mm +- 4 mm, which seems to be sufficient for the desired application field.
Das Ziel dieser Arbeit war die Umsetzung eines Wahrnehmungsensors für Softwareagenten, die über ein virtuelles Menschmodell in einer dreidimensionalen Umgebung agieren. Hierbei sollen die Agenten über den Sensor in der Lage sein, semantische Informationen zu geometrischen Objekten in der Umgebung zu erhalten. Hierfür wurden zwei Verfahren umgesetzt, die das menschliche Sehen simulieren, indem Objekte erkannt werden, wenn diese innerhalb eines Sichtfelds liegen. Ein Problem, das dabei gelöst werden muss, ist die Identifizierung möglicher Verdeckungen der Objekte. Ein Ansatz, dieses Problem zu lösen, ist der Ray-Tracing Ansatz, welcher für das erste Verfahren umgesetzt wurde. Das zweite Verfahren verwendet den Occlusion-Culling Ansatz. Auswertungen beider Verfahren haben gezeigt, dass der Ray-Tracing Ansatz eine schnellere Laufzeit aufweist, der Occlusion-Culling Ansatz jedoch mehr unverdeckte Objekte im Sichtfeld erkennt.
Sleep analysis using a Polysomnography system is difficult and expensive. That is why we suggest a non-invasive and unobtrusive measurement. Very few people want the cables or devices attached to their bodies during sleep. The proposed approach is to implement a monitoring system, so the subject is not bothered. As a result, the idea is a non-invasive monitoring system based on detecting pressure distribution. This system should be able to measure the pressure differences that occur during a single heartbeat and during breathing through the mattress. The system consists of two blocks signal acquisition and signal processing. This whole technology should be economical to be affordable enough for every user. As a result, preprocessed data is obtained for further detailed analysis using different filters for heartbeat and respiration detection. In the initial stage of filtration, Butterworth filters are used.
Theoretical foundation, effectiveness, and design artefact for machine learning service repositories
(2022)
Machine learning (ML) has played an important role in research in recent years. For companies that want to use ML, finding the algorithms and models that fit for their business is tedious. A review of the available literature on this problem indicates only a few research papers. Given this gap, the aim of this paper is to design an effective and easy-to-use ML service repository. The corresponding research is based on a multi-vocal literature analysis combined with design science research, addressing three research questions: (1) How is current white and gray literature on ML services structured with respect to repositories? (2) Which features are relevant for an effective ML service repository? (3) How is a prototype for an effective ML service repository conceptualized? Findings are relevant for the explanation of user acceptance of ML repositories. This is essential for corporate practice in order to create and use ML repositories effectively.
The tale of 1000 cores: an evaluation of concurrency control on real(ly) large multi-socket hardware
(2020)
In this paper, we set out the goal to revisit the results of “Starring into the Abyss [...] of Concurrency Control with [1000] Cores” and analyse in-memory DBMSs on today’s large hardware. Despite the original assumption of the authors, today we do not see single-socket CPUs with 1000 cores. Instead multi-socket hardware made its way into production data centres. Hence, we follow up on this prior work with an evaluation of the characteristics of concurrency control schemes on real production multi-socket hardware with 1568 cores. To our surprise, we made several interesting findings which we report on in this paper.
In this paper, we propose a radical new approach for scale-out distributed DBMSs. Instead of hard-baking an architectural model, such as a shared-nothing architecture, into the distributed DBMS design, we aim for a new class of so-called architecture-less DBMSs. The main idea is that an architecture-less DBMS can mimic any architecture on a per-query basis on-the-fly without any additional overhead for reconfiguration. Our initial results show that our architecture-less DBMS AnyDB can provide significant speedup across varying workloads compared to a traditional DBMS implementing a static architecture.
In this paper, we present a new approach for achieving robust performance of data structures making it easier to reuse the same design for different hardware generations but also for different workloads. To achieve robust performance, the main idea is to strictly separate the data structure design from the actual strategies to execute access operations and adjust the actual execution strategies by means of so-called configurations instead of hard-wiring the execution strategy into the data structure. In our evaluation we demonstrate the benefits of this configuration approach for individual data structures as well as complex OLTP workloads.
The basic idea behind a wearable robotic grasp assistancesystem is to support people that suffer from severe motor impairments in daily activities. Such a system needs to act mostly autonomously and according to the user’s intent. Vision-based hand pose estimation could be an integral part of a larger control and assistance framework. In this paper we evaluate the performance of egocentric monocular hand pose estimation for a robot-controlled hand exoskeleton in a simulation. For hand pose estimation we adopt a Convolutional Neural Network (CNN). We train and evaluate this network with computer graphics, created by our own data generator. In order to guide further design decisions we focus in our experiments on two egocentric camera viewpoints tested on synthetic data with the help of a 3D-scanned hand model, with and without an exoskeleton attached to it.We observe that hand pose estimation with a wrist-mounted camera performs more accurate than with a head-mounted camera in the context of our simulation. Further, a grasp assistance system attached to the hand alters visual appearance and can improve hand pose estimation. Our experiment provides useful insights for the integration of sensors into a context sensitive analysis framework for intelligent assistance.
Additive Manufacturing is increasingly used in the industrial sector as a result of continuous development. In the Production Planning and Control (PPC) system, AM enables an agile response in the area of detailed and process planning, especially for a large number of plants. For this purpose, a concept for a PPC system for AM is presented, which takes into account the requirements for integration into the operational enterprise software system. The technical applicability will be demonstrated by individual implemented sections. The presented solution approach promises a more efficient utilization of the plants and a more elastic use.
Additive manufacturing (AM) is a promising manufacturing method for many industrial sectors. For this application, industrial requirements such as high production volumes and coordinated implementation must be taken into account. These tasks of the internal handling of production facilities are carried out by the Production Planning and Control (PPC) information system. A key factor in the planning and scheduling is the exact calculation of manufacturing times. For this purpose we investigate the use of Machine Learning (ML) for the prediction of manufacturing times of AM facilities.
The blockchain technology enables a common data basis between the participants. Entries are logged and the authenticity of the participants is guaranteed. In the case of a relationship between customers and producers, this would lead to verifiable cooperation, which would be a major step as companies enter into service contracts based on the flow of many small transactions through communication. This paper proposes an architecture that enables the creation and processing of orders between the customer and producers via a blockchain based production network. The handling of larger files which are traceable via the blockchain is also shown and the use of a public or permissioned blockchain for an application case is also considered.
The performance and scalability of modern data-intensive systems are limited by massive data movement of growing datasets across the whole memory hierarchy to the CPUs. Such traditional processor-centric DBMS architectures are bandwidth- and latency-bound. Processing-in-Memory (PIM) designs seek to overcome these limitations by integrating memory and processing functionality on the same chip. PIM targets near- or in-memory data processing, leveraging the greater in-situ parallelism and bandwidth.
In this paper, we introduce pimDB and provide an initial comparison of processor-centric and PIM-DBMS approaches under different aspects, such as scalability and parallelism, cache-awareness, or PIM-specific compute/bandwidth tradeoffs. The evaluation is performed end-to-end on a real PIM hardware system from UPMEM.
Even though near-data processing (NDP) can provably reduce data transfers and increase performance, current NDP is solely utilized in read-only settings. Slow or tedious to implement synchronization and invalidation mechanisms between host and smart storage make NDP support for data-intensive update operations difficult. In this paper, we introduce a low-latency cache-coherent shared lock table for update NDP settings in disaggregated memory environments. It utilizes the novel CCIX interconnect technology and is integrated in neoDBMS, a near-data processing DBMS for smart storage. Our evaluation indicates end-to-end lock latencies of ∼80-100ns and robust performance under contention.
Multi-versioning and MVCC are the foundations of many modern DBMSs. Under mixed workloads and large datasets, the creation of the transactional snapshot can become very expensive, as long-running analytical transactions may request old versions, residing on cold storage, for reasons of transactional consistency. Furthermore, analytical queries operate on cold data, stored on slow persistent storage. Due to the poor data locality, snapshot creation may cause massive data transfers and thus lower performance. Given the current trend towards computational storage and near-data processing, it has become viable to perform such operations in-storage to reduce data transfers and improve scalability. neoDBMS is a DBMS designed for near-data processing and computational storage. In this paper, we demonstrate how neoDBMS performs snapshot computation in-situ. We showcase different interactive scenarios, where neoDBMS outperforms PostgreSQL 12 by up to 5×.
This work is a report on practical experiences with the issue of interoperability in German practice management systems (PMSs) from an ongoing clinical trial on teledermatology, the TeleDerm project. A proprietary and established web-platform for store-and-forward telemedicine is integrated with the IT in the GPs’ offices for automatic exchange of basic patient data. Most of the 19 different PMSs included in the study sample lack support of modern health data exchange standards, therefore the relatively old but widely available German health data exchange interface “Gerätedatentransfer” (GDT) is used. Due to the lack of enforcement and regulation of the GDT standard, several obstacles to interoperability are encountered. As a partial, but reusable working solution to cope with these issues, we present a custom middleware which is used in conjunction with GDT. We describe the design, technical implementation and observed hindrances with the existing infrastructure. A discussion on health care interfacing standards and the current state of interoperability in German PMS software is given.
Motivation
In order to enable context-aware behavior of surgical assistance systems, the acquisition of various information about the current intraoperative situation is crucial. To achieve this, the complex task of situation recognition can be delegated to a specialized system. Consequently, a standardized interface is required for the seamless transfer of the recognized contextual information to the assistance systems, enabling them to adapt accordingly.
Methods
Our group analyzed four medical interface standards to determine their suitability for exchanging intraoperative contextual information. The assessment was based on a harmonized data and service model derived from the requirements of expected context-aware use cases. The Digital Imaging and Communications in Medicine (DICOM) and IEEE 11073 for Service-oriented Device Connectivity (SDC) were identified as the most appropriate standards.
Results
We specified how DICOM Unified Procedure Steps (UPS), can be used to effectively communicate contextual information. We proposed the inclusion of attributes to formalize different granularity levels of the surgical workflow.
Conclusions
DICOM UPS SOP classes can be used for the exchange of intraoperative contextual information between a situation recognition system and surgical assistance systems. This can pave the way for vendor-independent context awareness in the OR, leading to targeted assistance of the surgical team and an improvement of the surgical workflow.
Large critical systems, such as those created in the space domain, are usually developed by a large number of organizations and, furthermore, they have to comply with standards. Yet, the different stakeholders often do not have a common understanding of the needed quality of requirements specifications. Achieving such a common understanding is a laborious process that is currently not sufficiently supported. Moreover, such a common understanding must be aligned with the standards. In this paper, we present an approach that can be used to align the different stakeholder perceptions regarding the quality of requirements specifications. Existing quality models for requirements specifications are analyzed for equivalences, and transferred into a common representation, the so-called Aligned Quality Map (AQM). Furthermore, a process is defined that supports the alignment of different stakeholder perspectives with regard to the quality of requirements specifications using AQM, which is validated in a case study in the context of European space projects. AQM has been created and populated with an initial set of quality models. It is designed in such way that it can be extended to include further quality models. The case study has shown that an alignment of different stakeholder perspectives and the quality model of the European Cooperation for Space Standardization using AQM is feasible. The approach allows for aligning different stakeholder perspectives for a common understanding of the quality of requirements specifications in the context of standards. Furthermore, AQM supports the assessment of requirements specifications.
This paper investigates the possibility to effectively monitor and control the respiratory action using a very simple and non invasive technique based on a single lightweight reduced-size wireless surface electromyography (sEMG) sensor placed below the sternum. The captured sEMG signal, due to the critical sensor position, is characterized by a low energy level and it is affected by motion artifacts and cardiac noise. In this work we present a preliminary study performed on adults for assessing the correlation of the spirometry signal and the sEMG signal after the removal of the superimposed heart signal. This study and the related findings could be useful in respiratory monitoring of preterm infants.
Smart meter based business models for the electricity sector : a systematical literature research
(2017)
The Act on the Digitization of the Energy Transition forces German industries and households to introduce smart meters in order to save engery, to gain individual based electricity tariffs and to digitize the energy data flow. Smart meter can be regarded as the advancement of the traditional meter. Utilizing this new technology enables a wide range of innovative business models that provide additional value for the electricity suppliers as well as for their customers. In this study, we followed a two-step approach. At first, we provide a state-of-the-art comparison of these business models found in the literature and identify structural differences in the way they add value to the offered products and services. Secondly, the business models are grouped into categories with respect to customer segmetns and the added value to the smart grid. Findings indicate that most business models focus on the end-costumer as their main customer.
Due to the consequential impact of technological breakdowns, companies have to be prepared to deal with breakdowns or even better prevent them. In today's information technology, several methods and tools exist to downscale this concern. Therefore, this paper deals with the initial determination of a resilient enterprise architecture supporting predictive maintenance in the information technology domain and furthermore, concerns several mechanisms on how to reactively and proactively secure the state of resiliency on several abstraction levels. The objective of this paper is to give an overview on existing mechanisms for resiliency and to describe the foundation of an optimized approach, combining infrastructure and process mining techniques.
While the concepts of object-oriented antipatterns and code smells are prevalent in scientific literature and have been popularized by tools like SonarQube, the research field for service-based antipatterns and bad smells is not as cohesive and organized. The description of these antipatterns is distributed across several publications with no holistic schema or taxonomy. Furthermore, there is currently little synergy between documented antipatterns for the architectural styles SOA and Microservices, even though several antipatterns may hold value for both. We therefore conducted a Systematic Literature Review (SLR) that identified 14 primary studies. 36 service-based antipatterns were extracted from these studies and documented with a holistic data model. We also categorized the antipatterns with a taxonomy and implemented relationships between them. Lastly, we developed a web application for convenient browsing and implemented a GitHub-based repository and workflow for the collaborative evolution of the collection. Researchers and practitioners can use the repository as a reference, for training and education, or for quality assurance.
While there are several theoretical comparisons of Object Orientation (OO) and Service Orientation (SO), little empirical research on the maintainability of the two paradigms exists. To provide support for a generalizable comparison, we conducted a study with four related parts. Two functionally equivalent systems (one OO and one SO version) were analyzed with coupling and cohesion metrics as well as via a controlled experiment, where participants had to extend the systems. We also conducted a survey with 32 software professionals and interviewed 8 industry experts on the topic. Results indicate that the SO version of our system possesses a higher degree of cohesion, a lower degree of coupling, and could be extended faster. Survey and interview results suggest that industry sees systems built with SO as more loosely coupled, modifiable, and reusable. OO systems, however, were described as less complex and easier to test.
Real Time Charging (RTC) applications that reside in the telecommunications domain have the need for extremely fast database transactions. Today´s providers rely mostly on in-memory databases for this kind of information processing. A flexible and modular benchmark suite specifically designed for this domain provides a valuable framework to test the performance of different DB candidates. Besides a data and a load generator, the suite also includes decoupled database connectors and use case components for convenient customization and extension. Such easily produced test results can be used as guidance for choosing a subset of candidates for further tuning/testing and finally evaluating the database most suited to the chosen use cases. This is why our benchmark suite can be of value for choosing databases for RTC use cases.
Microservices are a topic driven mainly by practitioners and academia is only starting to investigate them. Hence, there is no clear picture of the usage of Microservices in practice. In this paper, we contribute a qualitative study with insights into industry adoption and implementation of Microservices. Contrary to existing quantitative studies, we conducted interviews to gain a more in-depth understanding of the current state of practice. During 17 interviews with software professionals from 10 companies, we analyzed 14 service-based systems. The interviews focused on applied technologies, Microservices characteristics, and the perceived influence on software quality. We found that companies generally rely on well established technologies for service implementation, communication, and deployment. Most systems, however, did not exhibit a high degree of technological diversity as commonly expected with Microservices. Decentralization and product character were different for systems built for external customers. Applied DevOps practices and automation were still on a mediocre level and only very few companies strictly followed the you build it, you run it principle. The impact of Microservices on software quality was mainly rated as positive. While maintainability received the most positive mentions, some major issues were associated with security. We present a description of each case and summarize the most important findings of companies across different domains and sizes. Researchers may build upon our findings and take them into account when designing industry-focused methods.
While Microservices promise several beneficial characteristics for sustainable long-term software evolution, little empirical research covers what concrete activities industry applies for the evolvability assurance of Microservices and how technical debt is handled in such systems. Since insights into the current state of practice are very important for researchers, we performed a qualitative interview study to explore applied evolvability assurance processes, the usage of tools, metrics, and patterns, as well as participants’ reflections on the topic. In 17 semi-structured interviews, we discussed 14 different Microservice-based systems with software professionals from 10 companies and how the sustainable evolution of these systems was ensured. Interview transcripts were analyzed with a detailed coding system and the constant comparison method.
We found that especially systems for external customers relied on central governance for the assurance. Participants saw guidelines like architectural principles as important to ensure a base consistency for evolvability. Interviewees also valued manual activities like code review, even though automation and tool support was described as very important. Source code quality was the primary target for the usage of tools and metrics. Despite most reported issues being related to Architectural Technical Debt (ATD), our participants did not apply any architectural or service-oriented tools and metrics. While participants generally saw their Microservices as evolvable, service cutting and finding an appropriate service granularity with low coupling and high cohesion were reported as challenging. Future Microservices research in the areas of evolution and technical debt should take these findings and industry sentiments into account.
Maintainability assurance techniques are used to control this quality attribute and limit the accumulation of potentially unknown technical debt. Since the industry state of practice and especially the handling of service- and microservice-based systems in this regard are not well covered in scientific literature, we created a survey to gather evidence for a) used processes, tools, and metrics in the industry, b) maintainability-related treatment of systems based on service orientation, and c) influences on developer satisfaction w.r.t. maintainability. 60 software professionals responded to our online questionnaire. The results indicate that using explicit and systematic techniques has benefits for maintainability. The more sophisticated the applied methods the more satisfied participants were with the maintainability of their software while no link to a hindrance in productivity could be established. Other important findings were the absence of architecture-level evolvability control mechanisms as well as a significant neglect of service-oriented particularities for quality assurance. The results suggest that industry has to improve its quality control in these regards to avoid problems with long living service-based software systems.
While several service-based maintainability metrics have been proposed in the scientific literature, reliable approaches to automatically collect these metrics are lacking. Since static analysis is complicated for decentralized and technologically diverse microservice-based systems, we propose a dynamic approach to calculate such metrics from runtime data via distributed tracing. The approach focuses on simplicity, extensibility, and broad applicability. As a first prototype, we implemented a Java application with a Zipkin integrator, 23 different metrics, and five export formats. We demonstrated the feasibility of the approach by analyzing the runtime data of an example microservice based system. During an exploratory study with six participants, 14 of the 18 services were invoked via the system’s web interface. For these services, all metrics were calculated correctly from the generated traces.
While many maintainability metrics have been explicitly designed for service-based systems, tool-supported approaches to automatically collect these metrics are lacking. Especially in the context of microservices, decentralization and technological heterogeneity may pose challenges for static analysis. We therefore propose the modular and extensible RAMA approach (RESTful API Metric Analyzer) to calculate such metrics from machine-readable interface descriptions of RESTful services. We also provide prototypical tool support, the RAMA CLI, which currently parses the formats OpenAPI, RAML, and WADL and calculates 10 structural service-based metrics proposed in scientific literature. To make RAMA measurement results more actionable, we additionally designed a repeatable benchmark for quartile-based threshold ranges (green, yellow, orange, red). In an exemplary run, we derived thresholds for all RAMA CLI metrics from the interface descriptions of 1,737 publicly available RESTful APIs. Researchers and practitioners can use RAMA to evaluate the maintainability of RESTful services or to support the empirical evaluation of new service interface metrics.
Scenario-based analysis is a comprehensive technique to evaluate software quality and can provide more detailed insights than e.g. maintainability metrics. Since such methods typically require significant manual effort, we designed a lightweight scenario-based evolvability evaluation method. To increase efficiency and to limit assumptions, the method exclusively targets service- and microservice-based systems. Additionally, we implemented web-based tool support for each step. Method and tool were also evaluated with a survey (N=40) that focused on change effort estimation techniques and hands-on interviews (N=7) that focused on usability. Based on the evaluation results, we improved method and tool support further. To increase reuse and transparency, the web-based application as well as all survey and interview artifacts are publicly available on GitHub. In its current state, the tool-supported method is ready for first industry case studies.
Towards a practical maintainability quality model for service- and microservice-based systems
(2017)
Although current literature mentions a lot of different metrics related to the maintainability of service-based systems (SBSs), there is no comprehensive quality model (QM) with automatic evaluation and practical focus. To fill this gap, we propose a Maintainability Model for Services (MM4S), a layered maintainability QM consisting of service properties (SPs) related with automatically collectable Service Metrics (SMs). This research artifact created within an ongoing Design Science Research (DSR) project is the first version ready for detailed evaluation and critical feedback. The goal of MM4S is to serve as a simple and practical tool for basic maintainability estimation and control in the context of BSs and their specialization
microservice-based systems (μSBSs).
In a time of digital transformation, the ability to quickly and efficiently adapt software systems to changed business requirements becomes more important than ever. Measuring the maintainability of software is therefore crucial for the long-term management of such products. With service-based systems (SBSs) being a very important form of enterprise software, we present a holistic overview of such metrics specifically designed for this type of system, since traditional metrics – e.g. object oriented ones – are not fully applicable in this case. The selected metric candidates from the literature review were mapped to 4 dominant design properties: size, complexity, coupling, and cohesion. Microservice-based systems (μSBSs) emerge as an agile and fine grained variant of SBSs. While the majority of identified metrics are also applicable to this specialization (with some limitations), the large number of services in combination with technological heterogeneity and decentralization of control significantly impacts automatic metric collection in such a system. Our research therefore suggests that specialized tool support is required to guarantee the practical applicability of the presented metrics to μSBSs.
IT environments that consist of a very large number of rather small structures like microservices, Internet of Things (IoT) components, or mobility systems are emerging to support flexible and agile products and services in the age of digital transformation. Biological metaphors of living and adaptable ecosystems with service-oriented enterprise architectures provide the foundation for self-optimizing, resilient run-time environments and distributed information systems. We are extending Enterprise Architecture (EA) methodologies and models that cover a high degree of heterogeneity and distribution to support the digital transformation and related information systems with micro-granular architectures. Our aim is to support flexibility and agile transformation for both IT and business capabilities within adaptable digital enterprise architectures. The present research paper investigates mechanisms for integrating Microservice Architectures (MSA) by extending original enterprise architecture reference models with elements for more flexible architectural metamodels and EA-mini-descriptions.
The fast moving process of digitization1 demands flexibility in order to adapt to rapidly changing business requirements and newly emerging business opportunities. New features have to be developed and deployed to the production environment a lot faster. To be able to cope with this increased velocity and pressure, a lot of software developing companies have switched to a Microservice Architecture (MSA) approach. Applications built this way consist of several fine-grained and heterogeneous services that are independently scalable and deployable. However, the technological and business architectural impacts of microservices based applications directly affect their integration into the digital enterprise architecture. As a consequence, traditional Enterprise Architecture Management (EAM) approaches are not able to handle the extreme distribution, diversity, and volatility of micro-granular systems and services. We are therefore researching mechanisms for dynamically integrating large amounts of microservices into an adaptable digital enterprise architecture.
To bring a pattern-based perspective to the SOA vs. microservices discussion, we qualitatively analyzed a total of 118 SOA patterns from 2 popular catalogs for their (partial) applicability to microservices. Patterns had to hold up to 5 derived microservices principles to be applicable. 74 patterns (63%) were categorized as fully applicable, 30 (25%) as partially applicable, and 14 (12%) as not applicable. Most frequently violated microservices characteristics werde Decentralization and Single System. The findings suggest that microservices and SOA share a large set of architectural principles and solutions in the general space of service-based systems while only having a small set of differences in specific areas.
Gamification is one of the recognized methods of motivating people in various life processes, and it has spread to many spheres of life, including healthcare. This article proposes a system design for long-term care patients using the method mentioned. The proposed system aims to increase patient engagement in the treatment and rehabilitation process via gamification. Literature research on available and earlier proposed systems was conducted to develop a suited system design. The primary target group includes bedridden patients and a sedentary lifestyle (predominantly lying in bed). One of the main criteria for selecting a suitable option was its contactless realization for the mentioned target groups in long-term care cases. As a result, we developed the system design for hardware and software that could prevent bedsores and other health problems from occurring because of low activity. The proposed design can be tested in hospitals, nursing homes, and rehabilitation centers.
Determination of accelerometer sensor position for respiration rate detection: initial research
(2022)
Continuous monitoring of a patient's vital signs is essential in many chronic illnesses. The respiratory rate (RR) is one of the vital signs indicating breathing diseases. This article proposes the initial investigation for determining the accelerometric sensor position of a non-invasive and unobtrusive respiratory rate monitoring system. This research aims to determine the sensor position in relation to the patient, which can provide the most accurate values of the mentioned physiological parameter. In order to achieve the result, the particular system setup, including a mechanical sensor holder construction was used. The breathing signals from 5 participants were analyzed corresponding to the relaxed state. The main criterion for selecting a suitable sensor position was each patient's average acceleration amplitude excursion, which corresponds to the respiratory signal. As a result, we provided one more defined important parameter for the considered system, which was not determined before.
The respiratory rate is a vital sign indicating breathing illness. It is necessary to analyze the mechanical oscillations of the patient's body arising from chest movements. An inappropriate holder on which the sensor is mounted, or an inappropriate sensor position is some of the external factors which should be minimized during signal registration. This paper considers using a non-invasive device placed under the bed mattress and evaluates the respiratory rate. The aim of the work is the development of an accelerometer sensor holder for this system. The normal and deep breathing signals were analyzed, corresponding to the relaxed state and when taking deep breaths. The evaluation criterion for the holder's model is its influence on the patient's respiratory signal amplitude for each state. As a result, we offer a non-invasive system of respiratory rate detection, including the mechanical component providing the most accurate values of mentioned respiratory rate.
Anforderungen an die Mensch-Maschine-Schnittstelle im Automobil auf dem Weg zum autonomen Fahren
(2017)
In den letzten Jahrzehnten haben immer mehr Fahrerassistenzsysteme Einzug in das Automobil gefunden und bereiten damit den Weg zu vollautonomen Fahrzeugen der Zukunft vor. So bieten bereits viele Hersteller Ausstattungsvarianten ihrer Fahrzeuge an, die für den Umstieg in die vollautonome Zukunft gewappnet sind. Um den Menschen mit auf den Weg zu nehmen, werden einige Anforderungen an die Mensch-Maschine-Schnittstelle (MMS) des Automobils gestellt. Für die teilautonomen Fahrzeuge der nächsten Generation gilt es, den Fahrerwechsel zwischen manuellem und autonomen Fahren für die Menschen bestmöglich zu gestalten. Die Arbeit wirft einen Blick auf ausgewählte Ansätze für zukünftige MMS-Systeme und bewertet diese anhand der Übergabezeiten zwischen Mensch und Maschine. Ein Wandel der MMS im Automobil wird empfohlen, um den Menschen mit den neuen Technologien vertraut zu machen.
Das Provisioning Tool automaIT wurde prototypisch um die Möglichkeit eines Data Discovery erweitert, mit dem Ziel, nicht durch automaIT verwaltete Systeme anbinden und steuern zu können. Daten aus dem Data Discovery werden mittels dem Tool Facter gesammelt und können dynamisch in ausführbare Modelle von automaIT integriert und ausgewertet werden. Dadurch kann der Verlauf weiterer Provisionierungsschritte gesteuert werden, ohne dass es eines manuellen Eingriffs bedarf.
Distraction of the driver is one of the most frequent causes for car accidents. We aim for a computational cognitive model predicting the driver’s degree of distraction during driving while performing a secondary task, such as talking with co-passengers. The secondary task might cognitively involve the driver to differing degrees depending on the topic of the conversation or the number of co-passengers. In order to detect these subtle differences in everyday driving situations, we aim to analyse in-car audio signals and combine this information with head pose and face tracking information. In the first step, we will assess driving, video and audio parameters reliably predicting cognitive distraction of the driver. These parameters will be used to train the cognitive model in estimating the degree of the driver’s distraction. In the second step, we will train and test the cognitive model during conversations of the driver with co-passengers during active driving. This paper describes the work in progress of our first experiment with preliminary results concerning driving parameters corresponding to the driver’s degree of distraction. In addition, the technical implementation of our experiment combining driving, video and audio data and first methodological results concerning the auditory analysis will be presented. The overall aim for the application of the cognitive distraction model is the development of a mobile user profile computing the individual distraction degree and being applicable also to other systems.
The rapid development and growth of knowledge has resulted in a rich stream of literature on various topics. Information systems (IS) research is becoming increasingly extensive, complex, and heterogeneous. Therefore, a proper understanding and timely analysis of the existing body of knowledge are important to identify emerging topics and research gaps. Despite the advances of information technology in the context of big data, machine learning, and text mining, the implementation of systematic literature reviews (SLRs) is in most cases still a purely manual task. This might lead to serious shortcomings of SLRs in terms of quality and time. The outlined approach in this paper supports the process of SLRs with machine learning techniques. For this purpose, we develop a framework with embedded steps of text mining, cluster analysis, and network analysis to analyze and structure a large amount of research literature. Although the framework is presented using IS research as an example, it is not limited to the IS field but can also be applied to other research areas.
The shift of populations to cities is creating challenges in many respects, thus leading to increasing demand for smart solutions of urbanization problems. Smart city applications range from technical and social to economic and ecological. The main focus of this work is to provide a systematic literature review of smart city research to answer two main questions: (1) How is current research on smart cities structured? And (2) What directions are relevant for future research on smart cities? To answer these research questions, a text-mining approach is applied to a large number of publications. This provides an overview and gives insights into relevant dimensions of smart city research. Although the main dimensions of research are already described in the literature, an evaluation of the relevance of such dimensions is missing. Findings suggest that the dimensions of environment and governance are popular, while the dimension of economy has received only limited attention.
The increasing urban population growth leads to challenges in cities in many aspects: Urbanisation problems such as excessive environmental pollution or increasing urban traffic demand new and innovative solutions. In this context, the concept of smart cities is discussed. An enabling element of the smart city concept is applying information technology (IT) to improve administrative efficiency and quality of life while reducing costs and resource consumption and ensuring greater citizen participation in administrative and urban development issues. While these smart city services are technologically studied and implemented, government officials, citizens or businesses are often unaware of the large variety of smart city service solutions. Therefore, this work deals with developing a smart city services catalogue that documents best practice services to create a platform that brings citizens, city government, and businesses together. Although the concept of IT service catalogues is not new and guidelines and recommendations for the design and development of service catalogues already exist in the corporate context, there is little work on smart city service catalogues. Therefore, approaches from agile software development and pattern research were adapted to develop the smart city service catalogue platform in this work.
Smart cities are considered data factories that generate an enormous amount of data from various sources. In fact data is the backbone of any smart services. Therefore, the strategic beneficial handling of this digital capital is crucial for cities. Some smart city pioneers have already written down their approach to data in the form of data strategies, but what should a city's data strategy include, and how can the goals and measures defined in the strategies be operationalized? This paper addresses these questions by looking closely at the data strategies of cities in Germany and the top three countries in the EU Digital Economy and Society Index. The in-depth analysis of 8 city data strategies has yielded 11 dimensions that cities should consider in their data strategy. These are relevance of data, principles, methods, data sharing, technology, data culture, data ethics, organizational structure, data security and privacy, collaborations, data literacy. In addition, data governance is a concept to put these 11 strategic dimensions into practice through standardization measures, training programs, and defining roles and responsibilities by developing a data catalog.
Data governance have been relevant for companies for a long time. Yet, in the broad discussion on smart cities, research on data governance in particular is scant, even though data governance plays an essential role in an environment with multiple stakeholders, complex IT structures and heterogeneous processes. Indeed, not only can a city benefit from the existing body of knowledge on data governance, but it can also make the appropriate adjustments for its digital transformation. Therefore, this literature review aims to spark research on urban data governance by providing an initial perspective for future studies. It provides a comprehensive overview of data governance and the relevant facets embedded in this strand of research. Furthermore, it provides a fundamental basis for future research on the development of an urban data governance framework.
Human pose estimation (HPE) is integral to scene understanding in numerous safety-critical domains involving human-machine interaction, such as autonomous driving or semi-automated work environments. Avoiding costly mistakes is synonymous with anticipating failure in model predictions, which necessitates meta-judgments on the accuracy of the applied models. Here, we propose a straightforward human pose regression framework to examine the behavior of two established methods for simultaneous aleatoric and epistemic uncertainty estimation: maximum a-posteriori (MAP) estimation with Monte-Carlo variational inference and deep evidential regression (DER). First, we evaluate both approaches on the quality of their predicted variances and whether these truly capture the expected model error. The initial assessment indicates that both methods exhibit the overconfidence issue common in deep probabilistic models. This observation motivates our implementation of an additional recalibration step to extract reliable confidence intervals. We then take a closer look at deep evidential regression, which, to our knowledge, is applied comprehensively for the first time to the HPE problem. Experimental results indicate that DER behaves as expected in challenging and adverse conditions commonly occurring in HPE and that the predicted uncertainties match their purported aleatoric and epistemic sources. Notably, DER achieves smooth uncertainty estimates without the need for a costly sampling step, making it an attractive candidate for uncertainty estimation on resource-limited platforms.
Die Bereitstellung klinischer Informationen im Operationssaal ist ein wichtiger Aspekt zur Unterstützung des chirurgischen Teams. Die roboter-assistierte Ösophagusresektion ist ein besonders komplexer Eingriff, der Potenzial zur workflowbasierten Unterstützung bietet. Wir präsentieren erste Ergebnisse der Entwicklung eines Checklisten-Tools mit der zugrundeliegenden Modellierung des chirurgischen Workflows und Informationsbedarf der Chirurgen. Das Checklisten-Tool zeigt hierfür die durchzuführenden Schritte chronologisch an und stellt zusätzliche Informationen kontextadaptiert bereit. Eine automatische Dokumentation von Start- und Endzeiten einzelner OP-Phasen und Schritte soll zukünftige Prozessanalysen der Operation ermöglichen.
Reliable and accurate car driver head pose estimation is an important function for the next generation of advanced driver assistance systems that need to consider the driver state in their analysis. For optimal performance, head pose estimation needs to be non-invasive, calibration-free and accurate for varying driving and illumination conditions. In this pilot study we investigate a 3D head pose estimation system that automatically fits a statistical 3D face model to measurements of a driver’s face, acquired with a low-cost depth sensor on challenging real-world data. We evaluate the results of our sensor-independent, driver-adaptive approach to those of a state-of-the-art camera-based 2D face tracking system as well as a non-adaptive 3D model relative to own ground-truth data, and compare to other 3D benchmarks. We find large accuracy benefits of the adaptive 3D approach.
EAM ist ein holistischer Ansatz, um komplexe IT- und Unternehmensstrukturen darzustellen. Dabei ist es von zentraler Bedeutung, diese Strukturen möglichst komplett und übersichtlich zu visualisieren. Ein Ansatz, dies zu erreichen, ist eine multiperspektivische Darstellung von mehreren Views in einem Architekturcockpit. Dabei können mehrere Views simultan betrachtet und analysiert werden. Dadurch ist es möglich, die Auswirkungen einer Analyse des Views eines Stakeholders simultan aus den Views anderer Stakeholder betrachten zu können, um eventuelle Wechselwirkungen zu erkennen und einen allgemeinen Überblick über die Unternehmensarchitektur zu behalten. In dieser Arbeit zeigen wir, von der Konzeption über die Umsetzung bis zu einem Anwendungsbeispiel, wie ein solches Architekturcockpit realisiert werden kann.
In Folge der gegenwärtigen Digitalisierung in der produzierenden Industrie werden Anwendungen oder Services mit potentiell positiven Auswirkungen auf Faktoren wie Effektivität und Arbeitsqualität entwickelt. Ein geeigneter Ansatz zur Stärkung motivierender Aspekte im Arbeitskontext kann Gamification darstellen. In dieser Arbeit ist die initiale Konzeption und Evaluation eines Gamification-Ansatzes für Anwender eines KI-Service zur Maschinenoptimierung dargestellt und möglichen Anforderungen an ein Konzept zur Motivationssteigerung extrahiert.