Refine
Document Type
- Journal article (49)
- Book (6)
- Book chapter (5)
- Doctoral Thesis (4)
- Patent / Standard / Guidelines (4)
- Conference proceeding (1)
Has full text
- no (69) (remove)
Is part of the Bibliography
- yes (69)
Institute
- Life Sciences (69) (remove)
Publisher
- Elsevier (23)
- IOP Publishing (7)
- Royal Society of Chemistry (6)
- Springer (5)
- CRC Press (3)
- The Royal Society of Chemistry (3)
- De Gruyter (2)
- DUZ Verlags- und Medienhaus GmbH (1)
- Druckerei & Verlagshaus Mainz (1)
- Gupta (1)
Palladium-doped silica materials with SiCH3 groups were fabricated by sol-gel method under various calcination atmospheres and membranes were made thereof by coating process. The results showed that air atmosphere can lead to the partial oxidation of metallic Pd0 to PdO while N2 and H2 atmospheres can effectively prevent metallic Pd0 from being oxidized. H2 atmosphere is proved to be a more prominent way to slow down the decomposition of organic SiCH3 group than N2 and air atmospheres. The surface area, micropore volume and porosity of palladium-doped silica membrane material calcined in H2 atmosphere are much higher than those calcined in N2 atmosphere. Compared with N2 atmosphere, the palladium-doped silica membranes calcined in H2 atmosphere showed higher H2 permeability and H2/CO2 selectivity before and after the steam exposure. The apparent activation energy of H2 permeation through the palladium-doped silica membrane calcined under H2 atmosphere (2.51 ± 0.05 kJ/mol) was slightly lower than that calcined under N2 atmosphere (2.84 ± 0.04 kJ/mol). Calcination atmosphere plays some role in membrane performance, which has greater influence on the permeance than on the gas permselectivity. Calcination under H2 atmosphere is well conducive to improve the gas permeance and H2 permselectivity of palladium-doped silica membrane.
This review gives a short overview of the physical processes involved in the formation of the polyelectrolyte multilayers (PEMs) and their destruction. These two processes are vital for the formation of PEMs with desired physical and chemical structures, and for loading them with active substances and their spatial controlled release. It includes a survey of the physical and chemical properties that are key points for controlling film nanostructure in relation to biological processes and different possibilities for controlling cell behavior by means of film composition, bioactivity, mechanical properties, and three-dimensional organization.
Within the scope of the present cumulative doctoral thesis six scientific papers were published which illustrates that modern reaction model-free (=isoconversional) kinetic analysis (ICKA) methods represents a universal and effective tool for the controlled processing of thermosetting materials. In order to demonstrate the universal applicability of ICKA methods, the thermal cure of different thermosetting materials having a very broad range of chemical composition (melamine-formaldehyde resins, epoxy resins, polyester-epoxy resins, and acrylate/epoxy resins) were analyzed and mathematically modelled. Some of the materials were based on renewable resources (an epoxy resin was made from hempseed oil; linseed oil was modified into an acrylate/epoxy resin). With the aid of ICKA methods not only single-step but also complex multi-step reactions were modelled precisely. The analyzed thermosetting materials were combined with wood, wood-based products, paper, and plant fibers which are processed to various final products. Some of the thermosetting materials were applied as coating (in form of impregnated décor papers or powder and wet coatings respectively) on wood substrates and the epoxy resin from hempseed oil was mixed with plant fibers and processed into bio-based composites for lightweight applications. From the final products mechanical, thermal, and surface properties were determined. The activation energy as function of cure conversion derived from ICKA methods was utilized to predict accurately the thermal curing over the course of time for arbitrary cure conditions. Furthermore the cure models were used to establish correlations between the cross-linking during processing into products and the properties of the final products. Therewith it was possible to derive the process time and temperature that guarantee optimal cross-linking as well as optimal product properties
Rats are commonly used in medical research as they enable a high grade of standardization. The exhalome of ventilated rats has not as yet been investigated using an ion mobility spectrometer coupled with a multi-capillary column (MCC-IMS). As a first step, a rat model has to be established to measure potential biomarkers in the exhale with long-term settings, allowing constant and continuous analysis of exhaled air in time series. Therefore, eight animals were anaesthetized, prepared and ventilated for 1 h. A total of 73 peaks were directly detected with the IMS chromatogram. Thirty five of them were assigned to the ventilator system and 38 to the animals. Peak intensity varied within three measurements. The intensity of analytes of individual rats varied by a factor of up to 18. This new model will also enable continuous measurements of volatile organic compounds (VOCs) from rat's breath in long-term experiments. It is hoped that, in the future, variability and progression of VOCs can be monitored in different models of diseases using this set-up.
Though bioprinting is a forward-looking approach in bone tissue engineering, the development of bioinks which are on the one hand processable with the chosen printing technique, and on the other hand possess the relevant mechanical as well as osteoconductive features remains a challenge. In the present study, polymer solutions based on methacrylated gelatin and methacrylated hyaluronic acid modified with hydroxyapatite (HAp) particles (5 wt%) were prepared. Encapsulation of primary human adipose derived stem cells in the HAp-containing gels and culture for 28 d resulted in a storage moduli significantly increased to 126% ± 9.6% compared to the value on day 1 by the sole influence of the HAp. Additional use of osteogenic media components resulted in an increase of storage module up to 199% ± 27.8%. Similarly, the loss moduli was increased to 370% ± 122.1% under the influence of osteogenic media components and HAp. Those changes in rheological material characteristics indicate a distinct change in elastic and viscous hydrogel properties, and are attributed to extensive matrix production in the hydrogels by the encapsulated cells, what could also be proven by staining of bone matrix components like collagen I, fibronectin, alkaline phosphatase and osteopontin. When using the cell-laden polymer solutions as bioinks to build up relevant geometries, the ink showed excellent printability and the printed grid structure's integrity remained intact over a culture time of 28 d. Again, an intense matrix formation as well as upregulation of osteogenic markers by the encapsulated cells could be shown. In conclusion, we demonstrated that our HAp-containing bioinks and hydrogels on basis of methacrylated gelatin and hyaluronic acid are on the one hand highly suitable for the build up of relevant three-dimensional geometries with microextrusion bioprinting, and on the other hand exhibit a significant positive effect on bone matrix development and remodeling in the hydrogels, as indicated by rheological measurements and staining of bone components. This makes the developed composite hydrogels an excellent material for bone bioprinting approaches.
Background aims: In vitro engineered adipose tissue is in great demand to treat lost or damaged soft tissue or to screen for new drugs, among other applications.However, today most attempts depend on the use of animal-derived sera. To pave the way for the application of adipose tissue-engineered
products in clinical trials or as reliable and robust in vitro test systems, sera should be completely excluded from the production process. In this study, we aimed to develop an in vitro adipose tissue model in the absence of sera and maintain its function long-term.
Methods: Human adipose tissue-derived stem cells were expanded and characterized in a xeno- and serum-free environment. Adipogenic differentiation was induced using a completely defined medium. Developed adipocytes were maintained in a completely defined maturation medium for additional 28 days. In addition to cell-viability and adherence, adipocyte-specific markers such as perilipin A expression of leptin release were evaluated.
Results: The defined differentiation medium enhanced cell adherence and lipid
accumulation at a significant level compared with the corresponding negative control. The defined maturation medium also significantly supported cell adherence and functional adipocyte maturation during the long-term culture period.
Conclusions: The process described here enables functional adipocyte generation and maintenance without the addition fo unknown or unimal-derived constituents, achieving an important milestone in the introduction of adipose tissue engineered products into clinical trials or in vitro screening.
Functionalised particles are highly requested in materials research, as they can be used as vital components in many advanced applications such as smart materials, functional coatings, drug carrier systems or adsorption materials. In this study, furan-functionalised melamine-formaldehyde (MF) particles were successfully prepared for the first time using an organic sol-gel process. Commercially available 2-Aminomethylfuran (AMF) and 2-Aminomethyl-5-methylfuran (AMMF) were used as modifying agents. In the isolated polymer particles, a melamine (M) to modifying agent ratio of M:AMF mol/mol 2.04:1 and M:AMMF ratio of mol/mol 1.25:1 was used. The obtained particles were isolated in various centrifugation and re-dispersion cycles and analysed using ATR-FT-IR, Raman and solid state 13C NMR spectroscopy, TGA, SEM and DSC measurements. Upon functionalisation the size of the MF particles increased (MF 1.59 µm, 27% CV (coefficient of variation); MF-AMF 2.56 µm, 25% CV; MF-AMMF 2.20 µm, 35% CV). DSC measurements showed that another type of exothermic residual reactivity besides condensation-based curing takes place with the furan-modified particles that is not related to the liberation of volatile compounds. The newly obtained particles are able to undergo Diels-Alder reactions with maleimide groups. The characteristic IR and Raman absorbance bands of the reaction products after the particles were reacted with 4,4′-Diphenylmethanebismaleimide reagent confirm the formation of a Diels-Alder adduct.
The self-healing effect of melamine-based surfaces, triggered by temperature, was investigated. The temperature triggered reversible healing chemistry, on which the self-healing effect is based, was the Diels-Alder (DA) reaction between furan and malemeide groups. Melamine-furan containing building blocks were connected by multi-functional maleimide crosslinker via a Diels-Alder (DA) reaction to giva a DA adduct. The DA adduct was then reacted with formaldehyde to form a network by conventional condensation reaction of melamine amino groups with formaldehyde. The obtained resin was characterised and used for the impregnation of paper. Impregnated papers and neat resin werde used to perform scratch-healing tests and mechanical analysis of the novel coating system.
Homogeneous and monodispersed furan functionalised melamine-formaldehyde particles were produced. As a precursor, 2-chloro-1,3,5-triazine-2,4-diamine (Mel) was selectively substituted with 2-aminomethyl furan (Fu) units in a convenient one step reaction. The pure reaction product Fu-Mel, which was used without further purification, was reacted with formaldehyde by conventional sol-gel condensation in aqueous medium to yield chemically homogenous, spherically shaped and monodispersed particles. The particles were analysed using ATR-FT-IR, Raman, 1H and 13C NMR spectroscopy, TGA, SEM and DSC measurements. The reactivity of the furan groups located at the particle surface was studied by performing a thermoreversible Diels-Alder cycloaddition reaction with bis-maleimide coupling agents. The formed networks showed thermoreversible behaviour, which was characterised by dynamic IR and DSC measurements.