Refine
Document Type
- Journal article (6)
- Book chapter (3)
Language
- English (9)
Is part of the Bibliography
- yes (9)
Institute
- Texoversum (9) (remove)
Publisher
- Elsevier (9) (remove)
Several ionic liquids are excellent solvents for cellulose. Starting from that finishing of PET fabrics with cellulose dissolved in ionic liquids like 1-ethyl 3-methyl imidazolium acetate, diethylphosphate and chloride, or the chloride of butyl-methyl imidazolium has been investigated. Finishing has been carried out from solutions of different concentrations, using microcrystalline cellulose or cotton and by employing different cross-linkers. Viscosity of solutions has been investigated for different ionic liquids,concentrations, cellulose sources, linkers and temperatures. Since ionic liquids exhibit no vapor pressure,simple pad-dry-cure processes are excluded. Before drying the ionic liquid has to be removed by a rinsing step. Accordingly rinsing with fresh ionic liquid followed by water or the direct rinsing with waterhave been tested. The amount of cellulose deposited has been investigated by gravimetry, zinc chlorideiodine test as well as reactive dyeing. Results concerning wettability, water up-take, surface resistance,wear-resistance or washing stability are presented.
The wet chemical deposition of solution processed transparent conducting oxides (TCO) provides an alternative low cost and economical deposition technique to realize large-areas of conducting films. Since the price for the most common TCO Indium Tin Oxide rises enormously, Aluminum Zinc Oxide (AZO) as alternative TCO reaches more and more interest. The optoelectronical properties of nanoparticle coatings strongly depend beneath the porosity of the coating on the shape and size of the used particles. By using bigger or rod-shaped particles it is possible to minimize the amount of grain boundaries resulting in an improvement of the electrical properties, whereas particles bigger than 100 nm should not be used if highly transparent coatings are necessary as these big particles scatter the visible light and lower the transmittance of the coatings. In this work we present a simple method to synthesize AZO particles with different shape and size, but comparable electronical properties. We use a simple, well reproducible polyol method for synthesis and influence the shape and size of the particles by adding different amounts of water to the precursor solution. We can show that the addition of aluminum as dopant strongly hinders the crystal growth but the addition of water counteracts this, so that both, spherical and rod-shaped particles can be obtained.
For the widespread establishment of a circular economy, the acceptance of used products among consumers is a prerequisite. This paper investigates the customer experience of product service systems related to used products (PSSuP), such as renting, remanufacturing, and second-hand models, and aims to point out the offering characteristics that effect customer response and customer engagement. This study was conducted by means of a content analysis-based literature review of 69 empirical PSSuP studies. A frequency analysis of the categories that determine customer experience creation was conducted, as well as a contingency analysis to reveal the interrelationship between these categories. On this basis, the different PSSuP types were compared, and four strategic orientations of customer experience creation in PSSuP are pointed out: price, confidence, convenience, and delight orientation. For each of these strategic orientations, supportive PSSuP offering characteristics are specified. Building on the findings of this study, theoretical and managerial implications for product–service systems marketing are pointed out, and the need for research on the role of information and communication technology as an enabler of customer experience creation in PSSuP is highlighted.
Pultrusion of braids
(2016)
Nanocoatings based on sol–gel coatings are presented as suitable tool to modify materials based on polymers. The main focus is set onto textiles as the most common polymer materials. It presents which types of functionalization can be reached by modified sol–gel processes. Also a suitable categorization of functions is given and set into relation to common applications. A special focus is set on the functional properties, antimicrobial, UV protective, and flame retardant. The concept of bifunctional coatings is discussed and especially the combination of water-repellent and antistatic is presented.
The sol-gel approach offers a new class of flame retardants with a high potential for textile applications. Pure inorganic sol-gel systems do, however, typically not provide an effect sufficient for a sel-fextinguishing behavior on its own. We therefore employed compounds with nitrogen and phosphorous containing groups. Especially the combination of compounds with both elements, using the synergism, is promising for the aim to find well-applicable, environmental friendly, halogen-free flame retardants. In our approach, the sol-gel network ensured on the one hand the link to the textile as nonflammable binder. On the other hand, the sol-gel-based networks modified with functional groups containing nitrogen groups provided flame retardancy. In this way, a flame retardant finishing for textiles could be obtained by simple finishing techniques as, e.g., padding. Besides a characterization with various flame tests (e.g., according to EN ISO 15025 e protective clothing), we used a combination of cone calorimetry, thermogravimetry coupled with infrared spectroscopy analysis and scanning electron microscopy to analyze the mechanism of flame retardancy. Thus, we could show that the main mechanism is based on the formation of a protection layer. This work provides a model system for sol-gel-based flame retardants and has the potential to show the principle feasibility of the sol-gel approach in flame retardancy of textiles. It therefore lays the groundwork for tailoring sol-gel layers from newly synthesized sol-gel precursors containing nitrogen and phosphorous groups.
Woven piezoelectric sensors as part of the textile reinforcement of fiber reinforced plastics
(2019)
Sensor integration in fiber reinforced plastic (FRP) structures enables online process and structural health monitoring (SHM). This paper describes the development and application of woven fabric-based piezoelectric impact and bending sensors for integration into FRP. The work focuses on design and characterization of woven piezoelectric sensors, especially as a part of the reinforcement structure. The reinforcement of the component acts as a sensor in itself and therefore no additional external objects in the form of sensor components or sensor fibers, which could create unwanted weak points within the FRP, are added. The bending test results reveal a direct relationship between the applied load and the sensor signal. Furthermore, the appropriate sensor position in the component cross section was determined and the influence of thermal polarization on the sensor properties was investigated.
In addition to increased safety by detecting possible overload, continuous component monitoring by sensor integration makes the use of fiber reinforced plastics more cost-effective. Since the components are continuously monitored, one can switch from time-based to condition-based maintenance. However, the integration of conventional sensor components causes weak points, as foreign objects are inserted into the reinforcing structure. In this paper, we examine the use of the textile reinforcement as a sensor in itself. We describe how bending sensors can be formed by slightly modifying in the composite’s reinforcement structure. We investigated two different sensor principles. (1) The integration of textile plate capacitors into the structure; (2) The construction of textile piezo elements as part of the reinforcing structure. The bending test results reveal that textile plate capacitors show a load-dependent signal output. The samples with textile piezo elements show a significant increase in signal strength.