Refine
Year of publication
- 2017 (31) (remove)
Document Type
- Conference proceeding (31) (remove)
Language
- English (31)
Is part of the Bibliography
- yes (31)
Institute
- Technik (31) (remove)
Publisher
This work presents a spiral antenna array, which can be used in the V- and W-Band. An array equipped with Dolph-Chebychev coefficients is investigated to address issues related to the low gain and side lobe level of the radiating structure. The challenges encountered in this achievement are to provide an antenna that is not only good matched but also presents an appreciable effective bandwidth at the frequency bands of interest. Its radiation properties including the effective bandwidth and the gain are analyzed for the W-Band.
Condition Monitoring for mechanical systems like bearings or transmissions is often done by analysing frequency spectra obtained from accelerometers mounted to the components under observation. Although this approach gives a high amount on information about the system behaviour, the interpretation of the resulting spectra requires expert knowledge, that is, a deep understanding of the effect on condition deterioration on the measured spectra. However, an increasing number of condition monitoring applications demands other representations of the measured signals that can be easily interpreted even by non–experts. Therefore, the objective of this paper is to develop an approach for processing measured process data in order to obtain an easy to interpret measure for assessing the component condition. The main idea is to evaluate the deterioration of a component condition by computing the correlation function of current measurements with past measurements in order to detect a component condition deterioration from a change in these correlation functions. Besides the simplicity of the obtained measure, this approach opens the opportunity for integrating a model based approach as well. The developed method is tested based on a condition monitoring application in a roller chain.
A 3D face modelling approach for pose-invariant face recognition in a human-robot environment
(2017)
Face analysis techniques have become a crucial component of human-machine interaction in the fields of assistive and humanoid robotics. However, the variations in head-pose that arise naturally in these environments are still a great challenge. In this paper, we present a real-time capable 3D face modelling framework for 2D in-the-wild images that is applicable for robotics. The fitting of the 3D Morphable Model is based exclusively on automatically detected landmarks. After fitting, the face can be corrected in pose and transformed back to a frontal 2D representation that is more suitable for face recognition. We conduct face recognition experiments with non-frontal images from the MUCT database and uncontrolled, in the wild images from the PaSC database, the most challenging face recognition database to date, showing an improved performance. Finally, we present our SCITOS G5 robot system, which incorporates our framework as a means of image pre-processing for face analysis.
This paper reports an analysis of application and impact of FMEA on susceptibility of generic IT-networks. It is not new that in communication system, the frequency and the data transmission rate play a very important role. The rapid increase in miniaturization of electronic devices leads to very sensitivity against electromagnetic interference. Since the IT network with the data transfer rate makes a huge contribution to this development it is very important to monitor their functionality. Therefore, tests are performed to observe and ensure the data transfer rate of IT networks against IEMI. A fault tree model is presented and observed effects during radiation of disturbance on complex system by a HPEM interference sources are described using a continuous and consistent model of the physical layer to the application layer.
The purpose of this article is to provide insight of a new simple forecasting method based on a state-estimation algorithm known as the Kalman filter. While the accuracy of such algorithm is not comparable to state-of-the-art forecasting algorithms for PV-power production it does not require any internet connection, eyefish cameras or time intensive training. The algorithm was tested with several months of real high-resolution data with adequate results for the intended applications. The minimization of the necessary spinning reserve on a PV-diesel hybrid system to increase the solar fraction and reduce diesel consumption.
The demonstration project Virtual Power Plant Neckar-Alb is constructing a Virtual Power Plant (VPP) demonstration site at the Reutlingen University campus. The VPP demonstrator integrates a heterogeneous set of distributed energy resources (DERs) which are connected to control the infrastructure and an energy management system. This paper describes the components and the architecture of the demonstrator and presents strategies for demonstration of multiple optimization and control systems with different control paradigms.
Gallium nitride high electron mobility transistors (GaN-HEMTs) have low capacitances and can achieve low switching losses in applications where hard turn-on is required. Low switching losses imply a fast switching; consequently, fast voltage and current transients occur. However, these transients can be limited by package and layout parasitics even for highly optimized systems. Furthermore, a fast switching requires a fast charging of the input capacitance, hence a high gate current.
In this paper, the switching speed limitations of GaN-HEMTs due to the common source inductance and the gate driver supply voltage are discussed. The turn-on behavior of a GaN-HEMT is simulated and the impact of the parasitics and the gate driver supply voltage on the switching losses is described in detail. Furthermore, measurements are performed with an optimized layout for a drain-source voltage of 500 V and a drain-source current up to 60 A.
This paper introduces a novel placement methodology for a common-centroid (CC) pattern generator. It can be applied to various integrated circuit (IC) elements, such as transistors, capacitors, diodes, and resistors. The proposed method consists of a constructive algorithm which generates an initial, close to the optimum, solution, and an iterative algorithm which is used subsequently, if the output of constructive algorithm does not satisfy the desired criteria. The outcome of this work is an automatic CC placement algorithm for IC element arrays. Additionally, the paper presents a method for the CC arrangement evaluation. It allows for evaluating the quality of an array, and a comparison of different placement methods.
A new method for the analysis of movement dependent parasitics in full custom designed MEMS sensors
(2017)
Due to the lack of sophisticated microelectromechanical systems (MEMS) component libraries, highly optimized MEMS sensors are currently designed using a polygon driven design flow. The strength of this design flow is the accurate mechanical simulation of the polygons by finite element (FE) modal analysis. The result of the FE-modal analysis is included in the system model together with the data of the (mechanical) static electrostatic analysis. However, the system model lacks the dynamic parasitic electrostatic effects, arising from the electric coupling between the wiring and the moving structures. In order to include these effects in the system model, we present a method which enables the quasi dynamic parasitic extraction with respect to in-plane movements of the sensor structures. The method is embedded in the polygon driven MEMS design flow using standard EDA tools. In order to take the influences of the fabrication process into account, such as etching process variations, the method combines the FE-modal analysis and the fabrication process simulation data. This enables the analysis of dynamic changing electrostatic parasitic effects with respect to movements of the mechanical structures. Additionally, the result can be included into the system model allowing the simulation of positive feedback of the electrostatic parasitic effects to the mechanical structures.
We present a new methodology for automatic selection and sizing of analog circuits demonstrated on the OTA circuit class. The methodology consists of two steps: a generic topology selection method supported by a “part-sizing” process and subsequent final sizing. The circuit topologies provided by a reuse library are classified in a topology tree. The appropriate topology is selected by traversing the topology tree starting at the root node. The decision at each node is gained from the result of the part-sizing, which is in fact a node-specific set of simulations. The final sizing is a simulation-based optimization. We significantly reduce the overall simulation effort compared to a classical simulation-based optimization by combining the topology selection with the part-sizing process in the selection loop. The result is an interactive user friendly system, which eases the analog designer’s work significantly when compared to typical industrial practice in analog circuit design. The topology selection method and sizing process are implemented as a tool into a typical analog design environment. The design productivity improvement achievable by our method is shown by a comparison to other design automation approaches.