Refine
Year of publication
- 2020 (37) (remove)
Document Type
- Conference proceeding (17)
- Journal article (12)
- Report (3)
- Book chapter (2)
- Book (1)
- Doctoral Thesis (1)
- Working Paper (1)
Is part of the Bibliography
- yes (37)
Institute
- Technik (37) (remove)
Publisher
- IEEE (5)
- Elsevier (3)
- Hochschule Reutlingen (3)
- MDPI (3)
- Springer (3)
- European Association for the Development of Renewable Energy, Environment and Power Quality (2)
- SciTePress (2)
- VDE Verlag (2)
- eceee (2)
- Association for Computing Machinery (1)
Steady state efficiency optimization techniques for induction motors are state of the art and various methods have already been developed. This paper provides new insights in the efficiency optimized operation in dynamic regime. The paper proposes an anticipative flux modification in order to decrease losses during torque and speed transients. These trajectories are analyzed based on a numerical study for different motors. Measurement results for one motor are given as well.
Matthias Varga von Kibéd und Insa Sparrer unterscheiden zwischen drei verschiedenen Aufstellungsmethoden (Sparrer und Varga von Kibéd, o. D.): Der spezifisch (konkreten), der virtuellen und der prototypischen Aufstellung. Bei spezifischen Aufstellungen wird ein konkretes Anliegen eines Klienten betrachtet. Im Gegensatz dazu, werden bei virtuellen Aufstellungen eine Übungsumgebung geschaffen. In dieser können Aufstellungstechniken und Interventionsmethoden geübt werden. Bei prototypischen Strukturaufstellungen werden Themen zusammengefasst, die mehrere Teilnehmer im Seminar berühren bzw. in deren Alltag immer wieder auftreten können. Dieses Thema wird wie eine spezifische Aufstellung bearbeitet jedoch ohne ein konkretes vorliegendes Anliegen. Beispiele für prototypische Strukturaufstellungen kommen aus vielen Bereichen z.B. dem Führungsalltag, Teamentwicklung, Konfliktmanagement, Gesprächsführung, Zeit‐ und Selbstmanagement.
Der Anspruch an Energieversorger wird wachsen: in Zukunft gewinnen vor allem Aufgaben wie die Entwicklung digitalisierter Produkte/Dienstleistungen sowie ökologische Aktivitäten an Relevanz. Dies zeigt die Hochschule Reutlingen in ihrer aktuellen Untersuchung unter Aufsichtsräten, Geschäftsführern und Führungskräften. Trotz der erwarteten Veränderungen: die Aufsichtsräte sind sich zwar ihrem Druck zu mehr Professionalisierung bewusst, scheinen aktuell aber nur mäßig für die künftigen Herausforderungen des Unternehmens gerüstet. Besonders relevant dabei: die Professionalisierung der Gremienarbeit in kommunalen EVU ermöglicht einen höheren wahrgenommenen Unternehmenserfolg. So die Studie des Reutlinger Energiezentrums and der Hochschule Reutlingen im Auftrag von fünf Unternehmen der Branche.
Despite strong political efforts in Europe, industrial small- and medium sized enterprises (SMEs) seem to neglect adopting practices for energy effciency. By taking a cultural perspective, this study investigated what drives the establishment of energy effciency and corresponding practices in SMEs. Based on 10 ethnographic case studies and a quantitative survey among 500 manufacturing SMEs, the results indicate the importance of everyday employee behavior in achieving energy savings. The studied enterprises value behavior related measures as similarly important as technical measures. Raising awareness for energy issues within the organization, therefore, constitutes an essential leadership task that is oftentimes perceived as challenging and frustrating. It was concluded that the embedding of energy efficiency in corporate strategy, the use of a broad spectrum of different practices, and the empowerment and involvement of employees serve as major drivers in establishing energy effciency within SMEs. Moreover, the findings reveal institutional influences on shaping the meanings of energy effciency for the SMEs by raising attention for energy effciency in the enterprises and making energy effciency decisions more likely. The main contribution of the paper is to offer an alternative perspective on energy effciency in SMEs beyond the mere adoption of energy-effcient technology.
In Germany, mobility is currently in a state of flux. Since June 2019, electric kick scooters (e-scooters) have been permitted on the roads, and this market is booming. This study employs a user survey to generate new data, supplemented by expert interviews to determine whether such e-scooters are a climate-friendly means of transport. The environmental impacts are quantified using a life cycle assessment. This results in a very accurate picture of e-scooters in Germany. The global warming potential of an e-scooter calculated in this study is 165 g CO2-eq./km, mostly due to material and production (that together account for 73% of the impact). By switching to e-scooters where the battery is swapped, the global warming potential can be reduced by 12%. The lowest value of 46 g CO2-eq./km is reached if all possibilities are exploited and the life span of e-scooters is increased to 15 months. Comparing these emissions with those of the replaced modal split, e-scooters are at best 8% above the modal split value of 39 g CO2-eq./km.
Energy efficient electric control of drives is more and more important for electric mobility and manufacturing industries. Online dynamic optimization of induction machines is challenging due to the computational complexity involved and the variable power losses during dynamic operation of induction machines. This paper proposes a simple technique for sub-optimal online loss optimization using rotor flux linkage templates for energy efficient dynamic operation of induction machines. Such a rotor flux linkage template is given by a rotor flux linkage trajectory which is optimal for a specific scenario. This template is calculated in an offline optimization process. For a specific scenario during real time operation the rotor flux linkage is calculated by appropriately scaling the given template.
In this work, a brushless, harmonic-excited wound-rotor synchronous machine is investigated which utilizes special stator and rotor windings. The windings magnetically decouple the fundamental torque-producing field from the harmonic field required for the inductive power transfer to the field coil. In contrast to conventional harmonic-excited synchronous machines, the whole winding is utilized for both torque production and harmonic excitation such that no additional copper for auxiliary windings is needed. Different rotor topologies using rotating power electronic components are investigated and their efficiencies have been compared based on Finite-Element calculation and circuit analysis.
A methodology for designing planar spiral antennas with a feeding network embedded within a dielectric is presented. To avoid a purely academic work which may not be manufactured with available standard technologies, the approach takes into account manufacturing process requirements by choice of used materials in the simulation. General design rules are provided. They encompass amongst others, selection criteria for dielectric material, aspects to consider when sketching the radiating element design, as well as those for the implementation of the feeding network. A rule of thumb, which maybe helpful in the determination of the antenna supporting substrate’s height, has been found. The appeal of the method resides in the fact that it eases up the design process and helps to minimize errors, saving time and money. The approach also enables the design of a compact and small-size spiral antenna as antenna-in-package (AiP), and provides the opportunity to assemble the antenna with other RF components/systems on the same layer stack or on the same integration platform.
The generous feed-in tariffs (FiTs) introduced in Germany—which resulted in major growth in decentralized solar photovoltaic (PV) systems—will phase out in the coming years, making many of the existing distributed generation assets stranded. This challenge creates an opportunity for community-focused energy utilities, such as Elektrizitätswerke Schönau eG (EWS) based in Schönau, Germany, to try a new approach to assist its customers, makes the transition to a more sustainable future. This chapter describes how EWS is developing products and offering community-based solutions including peer-to-peer trading using automated platforms. Such innovative offering may lead to successful differentiation in a competitive and highly decentralized future.
Based on a survey among customers of seven German municipal utilities, we estimate two regression models to identify the most prospective customer segments and their preferences and motivations for participating in peer-to-peer (P2P) electricity trading and develop implications for decision-makers in the energy sector and policy-makers for this currently relatively unknown product. Our results show a large general openness of private households towards P2P electricity trading, which is also the main predictor of respondents' intention to participate. It is mainly influenced by individuals’ environmental attitude, technical interest, and independence aspiration. Respondents with the highest willingness to participate in P2P electricity trading are mainly motivated by the ability to share electricity, and to a lesser extent by economic reasons. They also have stronger preferences for innovative pricing schemes (service bundles, time-of-use tariffs). Differences between individuals can be observed depending on their current ownership (prosumers) or installation probability of a microgeneration unit (consumers, planners). Rather than current prosumers, especially planners willing to install microgeneration in the foreseeable future are considered to be the most promising target group for P2P electricity trading. Finally, our results indicate that P2P electricity trading could be a promising niche option in the German energy transition.
The objective of the project presented here is to develop an intelligent control algorithm for an energy system consisting of a biogas CHP (combined heat and power), various storage technologies, such as thermal energy storages (TES) and gas storages, and other renewable energy sources, such as photovoltaics. A corresponding algorithm based on the Monte-Carlo method has already been developed at Reutlingen University for CHP units running on natural gas and for heat pumps. The project presented here concentrates on the further development of this algorithm for application to biogas CP units. In this context, an adequate implementation of the gas storage is of primary importance, as it mainly determines the flexibility of the plant. In the course of the validation of the new optimization algorithm, simulations were carried out based on data from the Lower Lindenhof, an agricultural experimental station of the University of Hohenheim. Both an optimization with regard to onsite electricity utilization and an optimization driven by residual load were investigated. Preliminary results show that the optimization algorithm can improve the operation of the biogas CHP unit depending on the selected target function.
After more than three decades of electronic design automation, most layouts for analog integrated circuits are still handcrafted in a laborious manual fashion today. This book presents Self-organized Wiring and Arrangement of Responsive Modules (SWARM), a novel interdisciplinary methodology addressing the design problem with a decentralized multi-agent system. Its basic approach, similar to the roundup of a sheep herd, is to let autonomous layout modules interact with each other inside a successively tightened layout zone. Considering various principles of self-organization, remarkable overall solutions can result from the individual, local, selfish actions of the modules. Displaying this fascinating phenomenon of emergence, examples demonstrate SWARM’s suitability for floorplanning purposes and its application to practical place-and-route problems. From an academic point of view, SWARM combines the strengths of procedural generators with the assets of optimization algorithms, thus paving the way for a new automation paradigm called bottom-up meets top-down.
In an effort to make the cultural and institutional aspects of energy efficiency in industrial organizations more visible, this article introduces a theoretical framework of decision-making processes. Taking a sociological perspective and viewing organizations as cultural systems embedded in wider social contexts, I have developed a multilevel framework addressing institutional, organizational, and individual dimensions shaping decisions on energy efficiency. The framework's development is based on qualitative empirical fieldwork and integrates insights into organizational theory; neo-institutional theory, the attention-based view of the firm, and organizational culture theories. I conclude that decisions on energy efficiency are results of problematization and theorization processes. These processes emerge between the institutional issue-field, the organization, and its members. The model explains decisions shaped by environment (external and material), organizational processes (energy-efficiency practices, climate and culture) and individuals’ characteristics. The framework serves several purposes: introducing a meta-theory of decision making, providing a concept for empirical analysis, and enabling connectivity to the research on barriers.
Heat pumps are a vital element for reaching the greenhouse gas (GHG) reduction targets in the heating sector, but their system integration requires smart control approaches. In this paper, we first offer a comprehensive literature review and definition of the term control for the described context. Additionally, we present a control approach, which consists of an optimal scheduling module coupled with a detailed energy system simulation module. The aim of this integrated two part control approach is to improve the performance of an energy system equipped with a heat pump, while recognizing the technical boundaries of the energy system in full detail. By applying this control to a typical family household situation, we illustrate that this integrated approach results in a more realistic heat pump operation and thus a more realistic assessment of the control performance, while still achieving lower operational costs.
Heat pumps in combination with a photovoltaic system are a very promising option for the transformation of the energy system. By using such a system for coupling the electricity and heat sectors, buildings can be heated sustainably and with low greenhouse gas emissions. This paper reveals a method for dimensioning a suitable system of heat pump and photovoltaics (PV) for residential buildings in order to achieve a high level of (photovoltaic) PV self-consumption. This is accomplished by utilizing a thermal energy storage (TES) for shifting the operation of the heat pump to times of high PV power production by an intelligent control algorithm, which yields a high portion of PV power directly utilized by the heat pump. In order to cover the existing set of building infrastructure, 4 reference buildings with different years of construction are introduced for both single- and multi-family residential buildings. By this means, older buildings with radiator heating as well as new buildings with floor heating systems are included. The simulations for evaluating the performance of a heat pump/PV system controlled by the novel algorithm for each type of building were carried out in MATLAB-Simulink® 2017a. The results show that 25.3% up to 41.0% of the buildings’ electricity consumption including the heat pump can be covered directly from the PV installation per year. Evidently, the characteristics of the heating system significantly influence the results: new buildings with floor heating and low supply temperatures yield a higher level of PV self-consumption due to a higher efficiency of the heat pump compared to buildings with radiator heating and higher supply temperatures. In addition, the effect of adding a battery to the system was studied for two building types. It will be shown that the degree of PV self-consumption increases in case a battery is present. However, due to the high investment costs of batteries, they do not pay off within a reasonable period.
Bis zum Jahr 2050 soll in Baden Württemberg mit dem Ziel „50-80-90“ der Energiebedarf um 50% reduziert werden, die erneuerbaren Energien sollen zu 80% an der Energieversorgung beteiligt sein und die Emissionen von Treibhausgasen um 90% sinken.Entsprechende Ziele sind für andere Regionen und Länder in ähnlicher Weise festgelegt.
Damit diese Ziele erreicht werden, muss bei der Gebäudewärmeversorgung ein konsequenter Umbau stattfinden. Hier spielt die Sektorenkopplung mit Hilfe von Wärmepumpen (WP) eine entscheidende Rolle. Zur Abschätzung des Potenzials sowie des Aufwandes für einen großflächigen Einsatz von Wärmepumpen ist es unmöglich, eine spezifische und angepasste Dimensionierung der Wärmepumpensysteme für jedes einzelne Gebäude durchzuführen. Stattdessen müssen auf Seiten der Bebauung Referenzgebäude definiert und auf Seiten der Wärmepumpensysteme mittlere Leistungsdaten der am Markt befindlichen Modelle verwendet werden. Während die Festlegung von Referenzgebäuden verschiedentlich in der Literatur zu finden ist, widmet sich der erste Teil der Veröffentlichung der Vorstellung von Korrelationsfunktionen für die thermische und elektrische Leistung sowie die Leistungszahl (COP) von Wärmepumpen, die auf Basis von Herstellerdaten in Abhängigkeit der Quellen- und Vorlauftemperatur ermittelt wurden.
Konkret wurden als Ausgangsbasis für die Korrelationsfunktionen Datenblätter verschiedener Sole- und Luft-Wasser Wärmepumpen (SWP, LWP) zusammengestellt und ausgewertet. Die Grundlage hierfür war die Liste „Wärmepumpen mit Prüfnachweis eines unabhängigen Prüfinstituts“ des Bundesamts für Wirtschaft und Ausfuhrkontrolle (BAFA).
Der Anspruch an Energieversorger wird wachsen. In Zukunft gewinnen Aufgaben wie die Entwicklung digitalisierter Produkte und Dienstleistungen sowie ökologische Aktivitäten an Bedeutung. Dies zeigt die vorliegende Studie unter Aufsichtsräten, Geschäftsführern und Führungskräften in der Energiewirtschaft. Trotz der erwarteten Veränderungen: Die Aufsichtsräte sind sich zwar ihrem Druck zu mehr Professionalität bewusst, scheinen aktuell aber nur mäßig für die künftigen Herausforderungen des Unternehmens gerüstet zu sein. Besonders relevant dabei: Die Professionalisierung der Gremienarbeit in kommunalen EVU ermöglicht einen höheren wahrgenommenen Unternehmenserfolg. Aus Systemsicht bedarf es hierzu auch eines wirkungsvollen Zielsystems für das Unternehmen und hoher Führungswirksamkeit der Geschäftsführung, z. B. also der klaren Kommunikation der Unternehmensstrategie. Weiterhin sind mögliche Wahrnehmungsunterschiede im unternehmerischen Führungsstil der Geschäftsführung zu beachten und auszuräumen, da dies einen wichtigen Katalysator für unternehmerisches Denken und Handeln der Führungskräfte und Mitarbeiter darstellen kann.
Investigation of tympanic membrane influences on middle-ear impedance measurements and simulations
(2020)
This study simulates acoustic impedance measurements in the human ear canal and investigates error influences due to improperly accounted evanescence in the probe’s near field, cross-section area changes, curvature of the ear canal, and pressure inhomogeneities across the tympanic membrane, which arise mainly at frequencies above 10 kHz. Evanescence results from strongly damped modes of higher order, which can only be found in the near field of the sound source and are excited due to sharp cross-sectional changes as they occur at the transition from the probe loudspeaker to the ear canal. This means that different impedances are measured depending on the probe design. The influence of evanescence cannot be eliminated completely from measurements, however, it can be reduced by a probe design with larger distance between speaker and microphone. A completely different approach to account for the influence of evanescence is to evaluate impedance measurements with the help of a finite element model, which takes the precise arrangement of microphone and speaker in the measurement into account. The latter is shown in this study exemplary on impedance measurements at a tube terminated with a steel plate. Furthermore, the influences of shape changes of the tympanic membrane and ear canal curvature on impedance are investigated.