Refine
Document Type
- Conference proceeding (17)
- Journal article (10)
- Book chapter (1)
Is part of the Bibliography
- yes (28)
Institute
- ESB Business School (28) (remove)
Publisher
- Elsevier (14)
- Stellenbosch University (3)
- Technische Informationsbibliothek (2)
- Technische Universität Chemnitz (2)
- Curran Associates Inc. (1)
- IEEE (1)
- LIT Verlag (1)
- Leibniz-Universität Hannover (1)
- Next Level Interactive (1)
- SciTePress (1)
Industrial practice is characterized by random events, also referred to as internal and external turbulences, which disturb the target-oriented planning and execution of production and logistics processes. Methods of probabilistic forecasting, in contrast to single value predictions, allow an estimation of the probability of various future outcomes of a random variable in the form of a probability density function instead of predicting the probability of a specific single outcome. Probabilistic forecasting methods, which are embedded into the analytics process to gain insights for the future based on historical data, therefore offer great potential for incorporating uncertainty into planning and control in industrial environments. In order to familiarize students with these potentials, a training module on the application of probabilistic forecasting methods in production and intralogistics was developed in the learning factory 'Werk150' of the ESB Business School (Reutlingen University). The theoretical introduction to the topic of analytics, probabilistic forecasting methods and the transition to the application domain of intralogistics is done based on examples from other disciplines such as weather forecasting and energy consumption forecasting. In addition, data sets of the learning factory are used to familiarize the students with the steps of the analytics process in a practice-oriented manner. After this, the students are given the task of identifying the influencing factors and required information to capture intralogistics turbulences based on defined turbulence scenarios (e.g. failure of a logistical resource) in the learning factory. Within practical production scenario runs, the students apply probabilistic forecasting using and comparing different probabilistic forecasting methods. The graduate training module allows the students to experience the potentials of using probabilistic forecasting methods to improve production and intralogistics processes in context with turbulences and to build up corresponding professional and methodological competencies.
The persistent development towards decreasing batch sizes due to an ongoing product individualization, as well as increasingly dynamic market and competitive conditions lead to new changeability requirements in production environments. Since each of the individualized products mgith require different base materials or components and manufacturing resources, the paths of the products giong through the factory as well as the required internal transport and material supply processes are going to differ for every product. Conventional planning and control systems, which rely on predifined processes and central decision-making, are not capable to deal with the arising system's complexity along the dimensions of changing goods, layouts and throughput requirements. The concepts of "self-organization" in combination with "autonomous ocntrol" provide promising solutions to solve these new requirements by using among other things the potential of autonomous, decentralized and target-optimized logistical objects (e.g. smart products, bins and conveyor systems) wich are able to communicate and interact with each other as well as with human wokers. To investigate the potential of automation and human-robot collaboration for intralogistics, a research project for the development of a collaborative tugger train has been started at the ESB Logistics Learning Factory in lin with various student projects in neighboring research areas. This collaboraive tugger train system in combination with other manual (e.g. handcarts) and (semi-) automated conveyoer systems (e.g. automated guided forklift) will be integrated into a dynamic, self-organized scenario with varying production batch sizes to develop a method for target-oriented sefl-organization and autonomous control of intralogistics systems. For a structured investigation of self-organized scenarios a generic intralogistics model as well as a criteria cataloghe has been developed. The ESB Logistics Learning will serve as a practice-oriented research, validation and demonstration environment for these purposes.
The planning and control of intralogistics systems in line with versatile production systems of smart factories requires new approaches and methods to cope with changing requirements within future factories. The planning of intralogistics can no longer follow a static, sequential approach as in the past since the planning assumptions are going to change in a high frequency. Reasons for these constant changes are amongst others external turbulences like rapidly changing market conditions, decreasing batch sizes down to customer-specific products with a batch size of one and on the other hand internal turbulences (like production and logistic resource breakdowns) affecting the production system. This paper gives an insight into research approaches and results how capabilities of intelligent logistical objects (intelligent bins, autonomous transport systems etc.) can be used to achieve a self-organized, cost and performance optimized intralogistics system with autonomously controlled process execution within versatile production environments. A first consistent method has been developed which has been validated and implemented within a scenario at the pilot factory Werk150 at the ESB Business School (Reutlingen University). Based on the incoming production orders, the method of the Extended Profitability Appraisal (EPA) covering the work system value to define the most effective work system for order fulfilment is applied. To derive the appropriate intralogistics processes, an autonomous control method involving principles of decentralized and target-oriented decision-making (e.g. intelligent bins are interacting with autonomously controlled transport systems to fulfil material orders of assembly workstations) has been developed and applied to achieve a target-optimized process execution. The results of the first stage research using predefined material sources and sinks described in this paper is going to set the basis for the further development of a self-organized and autonomously controlled method for intralogistics systems considering dynamic source and sink relations. By allowing dynamic shifts of production orders in the sense of dynamic source and sink relations the cost and performance aims of the intralogistics system can be directly aligned with the aims of the entire versatile production system in the sense of self-organized and autonomously controlled systems.
Die zunehmende Durchdringung von cyber-physischen Systemen und deren Vernetzung zu cyberphysischen Produktionssystemen (CPPS) führt zu fundamentalen Veränderungen von zukünftigen Montage-, Fertigungs- und Logistiksystemen, welche innovative Methoden zur Planung, Steuerung und Kontrolle von wandlungsfähigen Produktionssystemen erfordern. Zukünftige logistische Systeme werden dabei den Anforderungen einer hochfrequenten Veränderung und Re-Konfiguration ausgelöst durch wandlungsfähige Produktionssysteme für individualisierte Produkte und kleinen Losgrößen unterliegen. Der Einsatz dezentraler Steuerungssysteme, bei denen die komplexen Planungs-, Steuerungs- und Kontrollprozesse auf zahlreiche Knoten und Entitäten des entstehenden Steuerungssystems verteilt werden, bietet ein großes Potential, den Anforderungen in cyber-physischen Logistiksystemen gerecht zu werden. Eine zentrale Herausforderung ist dabei die echtzeitfähige Steuerung und Re-Konfiguration von sogenannten hybriden Logistiksystemen, welche u.a. durch die Kollaboration von Mensch und Maschine, der Kombination verschiedenartiger Fördermittel sowie verschiedenartiger Steuerungsarchitekturen geprägt sind und darüber hinaus auf hybriden Entscheidungsfindungsprozessen beruhen, welche die Fähigkeiten von Menschen und (cyber-physischen) Systemen synergetisch nutzen.
Lernfabriken, wie die ESB Logistik-Lernfabrik an der ESB Business School (Hochschule Reutlingen), bieten dabei weitreichende Möglichkeiten, diese innovativen Methoden, Systeme und technischen Lösungen in einer industrienahen und risikofreien Fabrikumgebung zu entwickeln sowie in die Ausbildung von Studierenden und Weiterbildung von Teilnehmern aus der Industrie zu transferieren. Um die Forschung, Lehre sowie Aus- und Weiterbildung im Bereich zukünftiger Montage-, Fertigungs- und Logistiksysteme auszuweiten, wird das bestehende Produktionssystem der ESB Logistik-Lernfabrik im Rahmen verschiedenster Forschungs- und Studentenprojekte schrittweise in ein dezentral gesteuertes cyber-physisches Produktionssystem, basierend auf einer ereignisorientierten, cloud-basierten und dezentralen Steuerungsarchitektur, überführt.
The level of automation in intralogistics has steadily increased over recent years. For small and medium-sized enterprises (SMEs), however, the associated digital change is a major challenge. Since most SMEs are facing increasing sales volumes (e.g. due to e-commerce and good overall economy) in combination with decreasing lot sizes due to the market demand for individualized products, SMEs have to find innovative solutions to cope with these challenges in production as well as in logistics. Innovative technologies, like 3D printing technologies for the production for small lot sizes and future-oriented intralogistics technologies can serve as enablers in logistics to realize flexible logistic processes for increasing market requiremments. Considering that, this paper examines innovative and future-oriented technologies for intralogistics such as smart containers, driverless forklift systems, data glasses, smart shelves and smart pallets regarding their potential for SMEs. This explorative research paper shows that digital technologies are already suitable and available for SMEs.However, challenges are still seen in areas like the identification and digitalization potential and the financing of these new projects. The primary reason escpecially for SMEs for this is that they have to make investments based on an economically feasible payback period and less based on prestigious reasons like digitalization flagship projecs done by large corporations. In addition, the identification of feasible starting points for digitalization within intralogistic systems embedded in specific factory processes is a major challenge not only for SMEs.
Planning of available resources considering ergonomics under deterministic highly variable demand
(2020)
In this paper, a method for hybrid short- to long-term planning of available resources for operations is presented, which is based on a known or deterministically forecasted but highly variable demand. The method considers quantitative measures such as the performance and the availability of resources, ergonomically relevant KPI and ultimately process costs in order to serve as a pragmatic planning tool for operations managers in SMEs. Specifically, the method enables exploiting the ergonomic advantages of available flexible automation technology (e.g. AGVs or picking robots), while assuring that these do not represent a capacity bottleneck. After presenting the method along with the necessary assumptions, mainly concerning the availability of data for the calculations, we report a case study that quantifies the impact of throughput variability on the selection of different process alternatives, where different teams of resources are used.
Smart factories, driven by the integration of automation and digital technologies, have revolutionized industrial production by enhancing efficiency, productivity, and flexibility. However, the optimization and continuous improvement of these complex systems present numerous challenges, especially when real-world data collection is time-consuming, expensive, or limited. In this paper, we propose a novel method for semi-automated improvement of smart factories using synthetic data and cause-effect-relations, while incorporating the aspect of self-organization. The method leverages the power of synthetic data generation techniques to create representative datasets that mimic the behaviour of real-world manufacturing systems. These synthetic datasets serve together with the cause-and-effect relationships as a valuable resource for factory optimization, as they enable extensive experimentation and analysis without the constraints of limited or costly real-world data. Furthermore, the method embraces the concept of self organization within smart factories. By allowing the system to adapt and optimize itself based on feedback from the synthetic data, cause-effect-relationships, the factory can dynamically reconfigure and adjust its processes. To facilitate the improvement process, the method integrates the synthetic data with advanced analytics and machine learning algorithms as well as and the cause-and-effect relationships. This synergy between human expertise and technological advancements represents a compelling path towards a truly optimized smart factory of the future.
System- und Schnittstellenbeherrschung, Ideen- und Innovationsmanagement sowie die virtuell integrierte Produkt- und Prozessplanung sind zu entwickelnde Kompetenzen, die der veränderten Rolle des Menschen in der Industrie 4.0 Rechnung tragen. Dezidiert adressiert werden können diese in zukunftsweisend ausgerüsteten Lernfabriken.
Increasingly volatile market conditions and manufacturing environments combined with a rising demand for highly personalized products, the emergence of new technologies like cyber-physical systems and additive manufacturing as well as an increasing cross-linking of different entities (Industrie 4.0) will result in fundamental changes of future work and logistics systems. The place of production, the logistical network and the respective production system will underlie the requirements of constant changes and therefore sources and sinks of logistical networks have to obey the versatility of (cyber-physical) production systems. To cope with the arising complexity to control and monitor changeable production and logistics systems, decentralized control systems are the mean of choice since centralized systems are pushed to their limits in this regard. This paradigm shift will affect the overall concept under which production and logistics is planned, managed and controlled and how companies interact and collaborate within the emerging value chains by using dynamic methods to generate and execute the created network and to allocate available resources to fulfill the demand for customized products. In this field of research learning factories, like the ESB Logistics Learning Factory at ESB Business School (Reutlingen University), provide a great potential as a risk free test bed to develop new methods and technical solutions, to investigate new technologies regarding their practical use and to transfer the latest state of knowledge and specific competences into the training of students and professionals. Keeping with these guiding principles ESB Business School is transferring its existing production system into a cyber-physical production system to investigate innovative solutions for the design of human-machine collaboration and technical assistance systems as wells as to develop decentralized control methods for intralogistics systems following the requirements of changeable work systems including the respective design of dynamic inbound and outbound logistic networks.
Increasing flexibility, greater transparency and faster adaptability play a key role in the development of future intralogistics. Ever-changing environmental conditions require easy extensibility and modifiability of existing bin systems. This research project explores approaches to transfer the Internet of Things (IoT) paradigm to intralogistics. This allows a synchronization of the material and information flow. The bin is enabled by the implementation of adequate hardware and software components to capture, store, process and forward data to selected system subscribers. Monitoring the processes in the intralogistics by means of the smart bin system ensures the implementation of appropriate actions in case of defined deviations. By using explorative expert interviews with representatives from the automotive and pharmaceutical industries, seven practical application scenarios were defined. On this basis, the requirements of smart bin systems were examined. For each individual case of application, a system model was created in order to obtain an overview of the system components and thus reveal similarities and differences. Based on the similarities of the system models, a general requirement profile was derived. After the hardware components of the bin system had been determined, a utility analysis was carried out to find the adequate IoT software. The utility analysis was conducted with a focus on data acquisition and data transfer, data storage, data analysis, data presentation as well as authorization management and data security. The results show that there is great interest in easily expandable and modifiable bin systems, as in all cases, the necessary information flow in the existing bin system has to be improved by means of new IoT hardware and software components.
Mastering of complex systems and interfaces, idea and innovation management as well as virtually integrated product and process planning are essential competences to be developed and fostered to cope with the changing role of the workforce in a future industry 4.0 work system. Learning factories, like the Logistics Learning Factory at Reutlingen University, which are equipped with state-of-the-art infrastructure, offer a high potential to decidedly address these competences.
Development of an IoT-based inventory management solution and training module using smart bins
(2023)
Flexibility, transparency and changeability of warehouse environments are playing an increasingly important role to achieve a cost-efficient production of small batch sizes. This results in increasing requirements for warehouses in terms of flexibility, scalability, reconfigurability and transparency of material and information flows to deal with large number of different components and variable material and information flows due to small batch sizes. Therefore, an IoT-based inventory management solution and training module has been developed, implemented and validated at Werk150 – the Factory on campus of the ESB Business School. Key elements of the developed solution are smart bins using weight mats to track the bin’s content and additional sensors and buttons which are connected to an IoT – Hub to collect data of material consumption and manual handling operations. The use of weight mats for the smart bins offers the possibility to measure the container content independent of the specific component geometry and thus for a variety of components based on the specific component weights. The developed solution enables focusing on key for success elements of the system to provide synchronization of the flow of materials and information resulting an increase of flexibility and significantly higher transparency of the material flow. AIbased algorithms are applied to analyse the gathered data and to initiate process optimizations by providing the logistics decision makers a profound and transparent basis for decision making. In order to provide students and industry visitors of the learning factory with the necessary competences and to support the transfer into practice, a training module on IoT-based inventory management was developed and implemented.
Manufacturing companies are confronted with external (e.g. short-term change of product configuration by the customer) and internal (e.g. production process deviations) turbulences which are affecting the performance of production. Predefined, centrally controlled logistics processes are limiting the possibilities of production to initiate countermeasures to react in an optimized way to these turbulences. The autonomous control of intralogistics offers a great potential to cope with these turbulences by using the respective flexibility corridors of production systems and applying intelligent logistic objects with decentralized decision and process execution capabilities to maintain a target-optimized production. A method for AI-based storage-location- and material-handling-optimization to achieve performance-optimized intralogistics system through continuous monitoring of performance-relevant parameters and influencing factors by using AI (e.g. for pattern recognition) has been developed. To provide the basis to investigate and demonstrate the potentials of autonomously controlled intralogistics in connection with turbulences of production and in combination with AI, an intelligent warehouse involving an indoor localization system, smart bins, manual, semi-automated/collaborative and autonomous transport systems has been developed and implemented at Werk150, the factory on campus of ESB Business School (Reutlingen University). This scenario, which has been integrated into graduate training modules, allows the analysis and demonstration of different measures of intralogistics to cope with turbulences in production involving amongst others storage and material provision processes. The target fulfilment of the applied intralogistics measures to master arising turbulences is assessed based on the overall performance of production considering lead times and adherence to delivery dates. By applying artificial intelligence (AI) algorithms the intelligent logistical objects (smart bin, transport systems, etc.) as well as the entire logistics system should be enabled to improve their decision and process execution capabilities to master short-term turbulences in the production system autonomously.
Circular economy aims to support reuse and extends the product life cycles through repair, remanufacturing, upgrades and retrofits, as well as closing material cycles through recycling. To successfully manage the necessary transformation processes to circular economy, manufacturing enterprises rely on the competency of their employees. The definition of competency requirements for circular economy-oriented production networks will contribute to the operationalization of circular economy. The International Association of Learning Factories (IALF) statesin its mission the development of learning systems addressing these challenges for training of students and further education of industry employees. To identify the required competencies for circular economy, the major changes of the product life cycle phases have been investigated based on the state of the science and compared to the socio-technical infrastructure and thematic fields of the learning factories considered in this paper. To operationalize the circular economy approach in the product design and production phase in learning factories, an approach for a cross learning factory network (so called "Cross Learning Factory Product Production System (CLFPPS)") has been developed. The proposed CLFPPS represents a network on the design dimensions of learning factories. This approach contributes to the promotion of circular economy in learning factories as it makes use of and combines the focus areas of different learning factories. This enables the CLFPPS to offer a holistic view on the product life cycle in production networks.
Especially, if the potential of technical and organizational measures for ergonomic workplace design is limited, exoskeletons can be considered as innovative ergonomic aids to reduce the physical workload of workers. Recent scientific findings from ergonomic analyses with and without exoskeletons are indicating that strain reduction can be achieved, particularly at workplaces with lifting, holding, and carrying processes. Currently, a work system design method is under development incorporating criteria and characteristics for the design of work systems in which a human worker is supported by an exoskeleton. Based on the properties of common passive and active exoskeletons, factors influencing the human on which an exoskeleton can have a positive or negative effect (e.g. additional weight) were derived. The method will be validated by the conceptualization and setup of several work system demonstrators at Werk150, the factory of ESB Business School on campus of Reutlingen University, to prove the positive ergonomic effect on humans and the supporting process to choose the suitable exoskeleton. The developed method and demonstrators enable the user to experience the positive ergonomic effects of exoskeletal support in lifting, holding and carrying processes in logistics and production. The new work system design method will contribute to the fact that employees can pursue their professional activity longer without substantial injuries or can be used more flexibly at different work stations. Also new work concepts, strategies and scenarios are opened up to reduce the risk of occupational accidents and to promote the compatibility of work for employees. A training module is being developed and evaluated with participants from industry and master students to build up competence.
Future intralogistics systems need to adapt flexibly to changing material flow requirements in line with future versatile factory environments, producing personalized products under the performance and cost conditions of today's mass production. Small batch sized down to a batch size of "1" lead to a high complexity in the design and economical manufacturing of these customized products. Intralogistics systems are integrated into higher-level areas (segment level) as well as into upsteam and downstream performance units (system-wide areas). This includes the logistic activities relevant for the system (organized according to storage, picking, transport) such as transportation or storage tasks of tools, semi-finished products, components, assemblies and containers, and waste. Today's centralized material flow control systems, which work based on predefined processes, are not capable and more specifically not suitable to deal with the arising complexity of changeable intralogistics systems. Autononomous, decentralized material flow control systems distribute the required decision-making and control processes on intelligent logistic entities. A major step for the development of an autonomous control method for hybrid intralogistics systems (manual, semi-automated and automated) is the development of a generic archetype for intralogistics systems regarding the system boundaries, elements and relations resulting in a descriptive model taking into account amongst others the time of demand, availability of resources, economic efficiency and technical performance parameters. The ESB Logistics Learning Factory at ESB Business School (Reutlingen University) serves for this as a close-to-reality development and validation environment.
The global demand for individualized products leading to decreasing production batch sizes requires innovative approaches how to organize production and logistics systems in a dynamic manner. Current material flow systems mainly rely on predefined system structures and processes, which result in a huge increase of complexity and effort for system and process changes to realize an optimized production and material provision of individualized products. Autonomous production and logistics entities in combination with intelligent products or logistic load carriers following the vision of the “Internet of Things” offer a promising solution for mastering this complexity based on autonomous, decentralized and target size-optimized decision making and structure formation without the need for predefined processes and central decision-making bodies. Customer orders are going to prioritize themselves and communicate directly with the required production and logistics resources. Bins containing the required materials are going to communicate with the conveyors or workers of the respective intralogistics system organizing and controlling the material flow to the autonomously selected workstation. A current research project is the development of a collaborative tugger train combing the potential of automation and human-robot collaboration in intralogistics. This tugger train is going to be integrated into a self organized intralogistics scenario involving individualized customer orders (low to high batch sizes). To classify the application of self-organization within intralogistics systems, a criteria catalogue has been developed. The application of this criteria catalogue will be demonstrated on the example of a self-organization scenario involving the collaborative tugger train and an intelligent bin system.
The approach of self-organized and autonomous controlled systems offers great potential to meet new requirements for the economical production of customized products with small batch sizes based on a distributed, flexible management of dynamics and complexity within the production and intralogistics system. To support the practical application of self-organization for intralogistics systems, a catalogue of criteria for the evaluation of the self-organization of flexible logistics systems has been developed and validated, which enables the classification of logistics systems as well as the identification and evaluation of corresponding potentials that can be achieved by increasing the degree of self-organization.
Rapidly changing market conditions and global competition are leading to an increasing complexity of logistics systems and require innovative approaches with respect to the organisation and control of these systems. In scientific research, concepts of autonomously controlled logistics systems show a promising approach to meet the increasing requirements for flexible and efficient order processing. In this context, this work aims to introduce a system that is able to adjust order processing dynamically, and optimise intralogistics transportation regarding various generic intralogistics target criteria. The logistics system under consideration consists of various means of transport for autonomous decision-making and fulfilment of transport orders with defined source-sink relationships. The context of this work is set by introducing the Learning Factory Werk 150 with its existing hardware and software infrastructure and its defined target figures to measure the performance of the system. Specifically, the important target figures cost and performance are considered for the transportation system. The core idea of the system’s logic is to solve the problem of order allocation to specific means of transport by linking a Genetic Algorithm with a Multi-Agent System. The implementation of the developed system is described in an application scenario at the learning factory.
The increasing emergence of cyber-physical systems (CPS) and a global crosslinking of these CPS to cyber-physical production systems (CPPS) are leading to fundamental changes of future work and logistic systems requiring innovative methods to plan, control and monitor changeable production systems and new forms of human-machine-collaboration. Particularly logistic systems have to obey the versatility of CPPS and will be transferred to so-called cyber physical logistic systems, since the logistical networks will underlie the requirements of constant changes initiated by changeable production systems. This development is driven and enhanced by increasingly volatile and globalized market and manufacturing environments combined with a high demand for individualized products and services. Also nowadays mainly used centralized control systems are pushed to their limits regarding their abilities to deal with the arising complexity to plan, control and monitor changeable work and logistic systems. Decentralized control systems bear the potential to cope with these challenges by distributing the required operations on various nodes of the resulting decentralized control system.
Learning factories, like the ESB Logistics Learning Factory at ESB Business School (Reutlingen University), provide a wide range of possibilities to develop new methods and innovative technical solutions in a risk-free and close-to-reality factory environment and to transfer knowledge as well as specific competences into the training of students and professionals. To intensify the research and training activities in the field of future work and logistics systems, ESB Business School is transferring its existing production system into a CPPS involving decentralized planning, control and monitoring methods and systems, human-machine-collaboration as well as technical assistance systems for changeable work and logistics systems.