Refine
Document Type
- Journal article (18)
- Conference proceeding (11)
Language
- English (29) (remove)
Is part of the Bibliography
- yes (29)
Institute
- ESB Business School (29)
Publisher
- Elsevier (29) (remove)
Product engineering and subsequent phases of product lifecycles are predominantly managed in isolation. Companies therefore do not fully exploit potentials through using data from smart factories and product usage. The novel intelligent and integrated Product Lifecycle Management (i²PLM) describes an approach that uses these data for product engineering. This paper describes the i²PLM, shows the cause-and-effect relationships in this context and presents in detail the validation of the approach. The i²PLM is applied and validated on a smart product in an industrial research environment. Here, the subsequent generation of a smart lunchbox is developed based on production and sensor data. The results of the validation give indications for further improvements of the i²PLM. This paper describes how to integrate the i²PLM into a learning factory.
Industrial practice is characterized by random events, also referred to as internal and external turbulences, which disturb the target-oriented planning and execution of production and logistics processes. Methods of probabilistic forecasting, in contrast to single value predictions, allow an estimation of the probability of various future outcomes of a random variable in the form of a probability density function instead of predicting the probability of a specific single outcome. Probabilistic forecasting methods, which are embedded into the analytics process to gain insights for the future based on historical data, therefore offer great potential for incorporating uncertainty into planning and control in industrial environments. In order to familiarize students with these potentials, a training module on the application of probabilistic forecasting methods in production and intralogistics was developed in the learning factory 'Werk150' of the ESB Business School (Reutlingen University). The theoretical introduction to the topic of analytics, probabilistic forecasting methods and the transition to the application domain of intralogistics is done based on examples from other disciplines such as weather forecasting and energy consumption forecasting. In addition, data sets of the learning factory are used to familiarize the students with the steps of the analytics process in a practice-oriented manner. After this, the students are given the task of identifying the influencing factors and required information to capture intralogistics turbulences based on defined turbulence scenarios (e.g. failure of a logistical resource) in the learning factory. Within practical production scenario runs, the students apply probabilistic forecasting using and comparing different probabilistic forecasting methods. The graduate training module allows the students to experience the potentials of using probabilistic forecasting methods to improve production and intralogistics processes in context with turbulences and to build up corresponding professional and methodological competencies.
The paper describes a new stimulus using learning factories and an academic research programme - an M.Sc. in Digital Industrial Management and Engineering (DIME) comprising a double degree - to enhance international collaboration between four partner universities. The programme will be structured in such a way as to maintain or improve the level of innovation at the learning factories of each partner. The partners agreed to use Learning Factory focus areas along with DIME learning modules to stimulate international collaboration. Furthermore, they identified several research areas within the framework of the DIME program to encourage horizontal and vertical collaboration. Vertical collaboration connects faculty expertise across the Learning Factory network to advance knowledge in one of the focus areas, while Horizontal collaboration connects knowledge and expertise across multiple focus areas. Together they offer a platform for students to develop disciplinary and cross-disciplinary applied research skills necessary for addressing the complex challenges faced by industry. Hence, the university partners have the opportunity to develop the learning factory capabilities in alignment with the smart manufacturing concept. The learning factory is thus an important pillar in this venture. While postgraduate students/researchers in the DIME program are the enablers to ensure the success of entire projects, the learning factory provides a learning environment which is entirely conducive to fostering these successful collaborations. Ultimately, the partners are focussed on utilising smart technologies in line with the digitalization of the production process.
The persistent development towards decreasing batch sizes due to an ongoing product individualization, as well as increasingly dynamic market and competitive conditions lead to new changeability requirements in production environments. Since each of the individualized products mgith require different base materials or components and manufacturing resources, the paths of the products giong through the factory as well as the required internal transport and material supply processes are going to differ for every product. Conventional planning and control systems, which rely on predifined processes and central decision-making, are not capable to deal with the arising system's complexity along the dimensions of changing goods, layouts and throughput requirements. The concepts of "self-organization" in combination with "autonomous ocntrol" provide promising solutions to solve these new requirements by using among other things the potential of autonomous, decentralized and target-optimized logistical objects (e.g. smart products, bins and conveyor systems) wich are able to communicate and interact with each other as well as with human wokers. To investigate the potential of automation and human-robot collaboration for intralogistics, a research project for the development of a collaborative tugger train has been started at the ESB Logistics Learning Factory in lin with various student projects in neighboring research areas. This collaboraive tugger train system in combination with other manual (e.g. handcarts) and (semi-) automated conveyoer systems (e.g. automated guided forklift) will be integrated into a dynamic, self-organized scenario with varying production batch sizes to develop a method for target-oriented sefl-organization and autonomous control of intralogistics systems. For a structured investigation of self-organized scenarios a generic intralogistics model as well as a criteria cataloghe has been developed. The ESB Logistics Learning will serve as a practice-oriented research, validation and demonstration environment for these purposes.
Since its first publication in 2015, the learning factory morphology has been frequently used to design new learning factories and to classify existing ones. The structuring supports the concretization of ideas and promotes exchange between stakeholders.
However, since the implementation of the first learning factories, the learning factory concept has constantly evolved.
Therefore, in the Working Group "Learning Factory Design" of the International Association of Learning Factories, the existing morphology has been revised and extended based on an analysis of the trends observed in the evolution of learning factory concepts. On the one hand, new design elements were complemented to the previous seven design dimensions, and on the other hand, new design dimensions were added. The revised version of the morphology thus provides even more targeted support in the design of new learning factories in the future.
Due to the complexity of assembly processes, a high ratio of tasks is still performed by human workers. Short-cyclically changing work contents due to smaller lot sizes, especially the varied series assesmbly, increases both the need for information support as well as the risk of rising physical and psychological stress. The use of technical and digital assistance systems can counter these challenges. Through the integration of information and communication technology as well as collaborative assembly technologies, hybrid cyber-physical assembly systems will emerge. Widely established assembly planning approaches for digital and technical support systems in cyber physical assembly systems will be outlined and discussed with regard to synergies and delimitations of planning perspectives.
Teaching at assembly workstations in production in SMEs (small and medium sized companies) often does not take place at all or only insufficiently. In addition to the lack of technical content, there are also aggravatingly incorrect movement sequences from an ergonomic point of view, which "untrained" people usually automatically acquire. An AI based approach is used to analyze a definite workflow for a specific assembly scope regarding the behavior of several employees. Based on these different behaviors, the AI gives feedback at which points in time, work steps and movement’s particularly dangerous incorrect postures occur. Motion capturing and digital human model simulation in combination with the results of the AI define the optimized workflow. Individual employees can be trained directly due to the fact that AI identifies their most serious incorrect postures and provide them with a direct analogy of their “wrong” posture and “easy on the joints posture”. With the assistance of various test persons, the AI can conduct a study in which the most frequently occurring incorrect postures can be identified. This could be realized in general or tailored to specific groups of people (e.g. "People over 1.90m tall must be particularly careful not to make the following mistake...). The approach will be tested and validated at the Werk150, the factory of the ESB Business School, on the campus of the Reutlingen University. The new gained knowledge will be used subsequently for training in SMEs.
Strategy to adjust people’s performance capabilities to new requirements and grantee employability in the world of work. Good examples for this are the current changes in the logistics environment. Regularly, new services and processes close to production were taken into the portfolio of logistics enterprises, so the daily Tasks are changing continuously for the skilled works.
LOPEC aims in developing and offering special-tailored training for Lean Logistics and required basic skills for skilled workers on shopfloor level. Needed know-how for today’s challenges in logistics will be transferred. Another aspect of LOPEC is the development and use of a personal excellence self-assessment that allows a Person to assess and thus improve his/her own level of maturity in employability skills. Thus, LOPEC is aiming at People ehancement as entry ticket to lifelong continuous learning by increasing the maturity level of personal logistic excellence. A common European view for “Logistics personal excellence” for skilled workers will ensure that the final product is an open product, using international, pan European validated standards. As results LOPEC will provide training modules for post-secondary education in the area of Lean Logistics, required basics skills and offers transparency of personal excellence with a personal self-assessment Software solution, regarding the personal maturity Level of hard and soft skills at any time. It can be used as an innovative tool for monitoring personal lifelong learning routes as well as within companies as a strategic tool within Human Resource Development.
In the last decade, numerous learning factories for education, training, and research have been built up in industry and academia. In recent years learning factory initiatives were elevated from a local to a European and then to a worldwide level. In 2014 the CIRP Collaborative Working Group (CWG) on Learning Factories enables a lively exchange on the topic "Learning Factories for future oriented research and education in manufacturing". In this paper results of discussions inside the CWG are presented. First, what is meant by the term Learning Factory is outlined. Second, based on the definition a description model (morphology) for learning factories is presented. The morphology covers the most relevant characteristics and features of learning factories in seven dimensions. Third, following the morphology the actual variance of learning factory manifestations is shown in six learning factory application scenarios from industrial training over education to research. Finally, future prospects of the learning factory concept are presented.
Learning factories present a promising environment for education, training and research, especially in manufacturing related areas which are a main driver for wealth creation in any nation. While numerous learning factories have been built in industry and academia in the last decades, a comprehensive scientific overview of the topic is still missing. This paper intends to close this gap establishing the state of the art of learning factories. The motivations, historic background, and the didactic foundations of learning factories are outlined. Definitions of the term learning factory and the corresponding morphological model are provided. An overview of existing learning factory approaches in industry and academia is provided, showing the broad range of different applications and varying contents. The state of the art of learning factories curricula design and their use to enhance learning and research as well as potentials and limitations are presented. Conclusions and an outlook on further research priorities are offered.
Technologies for mapping the “digital twin“ have been under development for approximately 20 years. Nowadays increasingly intelligent, individualized products encourages companies to respond innovatively to customer requirements and to handle the rising product variations quickly.
An integrated engineering network, spanning across the entire value chain, is operated to intelligently connect various company divisions, and to generate a business ecosystem for products, services and communities. The conditions for the digital twin are thereby determined in which the digital world can be fed into the real, and the real world back into the digital to deal such intelligent products with rising variations.
The term digital twin can be described as a digital copy of a real factory, machine, worker etc., that is created and can be independently expanded, automatically updated as well as being globally available in real time. Every real product and production site is permanently accompanied by a digital twin. First prototypes of such digital twins already exist in the ESB Logistics Learning Factory on a cloud- and app based software that builds on a dynamic, multidimensional data and information model. A standardized language of the robot control systems via software agents and positioning systems has to be integrated. The aspect of the continuity of the real factory in the digital factory as an economical means of ensuring continuous actuality of digital models looks as the basis of changeability.
For the indoor localization sensor combinations that in addition to the hardware already contain the software required for the sensor data fusion should be used. Processing systems, scenario-live-simulations and digital shop floor management results in a mandatory procedural combination. Essential to the digital twin is the ability to consistently provide all subsystems with the latest state of all required information, methods and algorithms.
Development of an IoT-based inventory management solution and training module using smart bins
(2023)
Flexibility, transparency and changeability of warehouse environments are playing an increasingly important role to achieve a cost-efficient production of small batch sizes. This results in increasing requirements for warehouses in terms of flexibility, scalability, reconfigurability and transparency of material and information flows to deal with large number of different components and variable material and information flows due to small batch sizes. Therefore, an IoT-based inventory management solution and training module has been developed, implemented and validated at Werk150 – the Factory on campus of the ESB Business School. Key elements of the developed solution are smart bins using weight mats to track the bin’s content and additional sensors and buttons which are connected to an IoT – Hub to collect data of material consumption and manual handling operations. The use of weight mats for the smart bins offers the possibility to measure the container content independent of the specific component geometry and thus for a variety of components based on the specific component weights. The developed solution enables focusing on key for success elements of the system to provide synchronization of the flow of materials and information resulting an increase of flexibility and significantly higher transparency of the material flow. AIbased algorithms are applied to analyse the gathered data and to initiate process optimizations by providing the logistics decision makers a profound and transparent basis for decision making. In order to provide students and industry visitors of the learning factory with the necessary competences and to support the transfer into practice, a training module on IoT-based inventory management was developed and implemented.
Manufacturing companies are confronted with external (e.g. short-term change of product configuration by the customer) and internal (e.g. production process deviations) turbulences which are affecting the performance of production. Predefined, centrally controlled logistics processes are limiting the possibilities of production to initiate countermeasures to react in an optimized way to these turbulences. The autonomous control of intralogistics offers a great potential to cope with these turbulences by using the respective flexibility corridors of production systems and applying intelligent logistic objects with decentralized decision and process execution capabilities to maintain a target-optimized production. A method for AI-based storage-location- and material-handling-optimization to achieve performance-optimized intralogistics system through continuous monitoring of performance-relevant parameters and influencing factors by using AI (e.g. for pattern recognition) has been developed. To provide the basis to investigate and demonstrate the potentials of autonomously controlled intralogistics in connection with turbulences of production and in combination with AI, an intelligent warehouse involving an indoor localization system, smart bins, manual, semi-automated/collaborative and autonomous transport systems has been developed and implemented at Werk150, the factory on campus of ESB Business School (Reutlingen University). This scenario, which has been integrated into graduate training modules, allows the analysis and demonstration of different measures of intralogistics to cope with turbulences in production involving amongst others storage and material provision processes. The target fulfilment of the applied intralogistics measures to master arising turbulences is assessed based on the overall performance of production considering lead times and adherence to delivery dates. By applying artificial intelligence (AI) algorithms the intelligent logistical objects (smart bin, transport systems, etc.) as well as the entire logistics system should be enabled to improve their decision and process execution capabilities to master short-term turbulences in the production system autonomously.
Development of an easy teaching and simulation solution for an autonomous mobile robot system
(2019)
With mass customized production becoming the mainstream, industries are shifting from large-scale manufacturing to flexible and customized production of small batch sizes. Agile manufacturing strategies adopted by SMEs are driving the usage of collaborative robots in today's factories. Major challenges in the adoption of cobots in the industry are the lack of a highly trained workforce to program the robot to perform complex tasks and integration of robot systems to other smart devices in the factory. In addition, the teaching and simulation by non-robotics experts of many industrial collaborative robot systems like the KUKA LBR iiwa is a major challenge, since these systems are designed to be programmed by robot experts and not by shop floor workers or other non-experts. This paper describes the research and development activities done for reducing the barriers in operation and ensure holistic integration of LBR iiwa cobot in the assembly on the example of the ESB Logistics Learning Factory. These include a visual programming solution for the easy teaching of various tasks. Robotic tasts are classified based on common robotics applications and application-specific blocks abstracting specific actions are implemented. A factory worker with no programming competency cour create robot programs by combining these blocks using a Graphical User Interface. In addition, a simulation solution was developed to visualized, analyse, and optimize robotic workflow before deployment. an autonomous mobile robot is integrated with the LBR iiw to improve reconfigurability and thus also the productivity. The system as a whole is controlled using an event-driven distributed control system. Finally, the capabilities of the system are analysed based on the design principles of Industrie 4.0 and potential future research ideas are discussed to further improve the system.
Circular economy aims to support reuse and extends the product life cycles through repair, remanufacturing, upgrades and retrofits, as well as closing material cycles through recycling. To successfully manage the necessary transformation processes to circular economy, manufacturing enterprises rely on the competency of their employees. The definition of competency requirements for circular economy-oriented production networks will contribute to the operationalization of circular economy. The International Association of Learning Factories (IALF) statesin its mission the development of learning systems addressing these challenges for training of students and further education of industry employees. To identify the required competencies for circular economy, the major changes of the product life cycle phases have been investigated based on the state of the science and compared to the socio-technical infrastructure and thematic fields of the learning factories considered in this paper. To operationalize the circular economy approach in the product design and production phase in learning factories, an approach for a cross learning factory network (so called "Cross Learning Factory Product Production System (CLFPPS)") has been developed. The proposed CLFPPS represents a network on the design dimensions of learning factories. This approach contributes to the promotion of circular economy in learning factories as it makes use of and combines the focus areas of different learning factories. This enables the CLFPPS to offer a holistic view on the product life cycle in production networks.
Especially, if the potential of technical and organizational measures for ergonomic workplace design is limited, exoskeletons can be considered as innovative ergonomic aids to reduce the physical workload of workers. Recent scientific findings from ergonomic analyses with and without exoskeletons are indicating that strain reduction can be achieved, particularly at workplaces with lifting, holding, and carrying processes. Currently, a work system design method is under development incorporating criteria and characteristics for the design of work systems in which a human worker is supported by an exoskeleton. Based on the properties of common passive and active exoskeletons, factors influencing the human on which an exoskeleton can have a positive or negative effect (e.g. additional weight) were derived. The method will be validated by the conceptualization and setup of several work system demonstrators at Werk150, the factory of ESB Business School on campus of Reutlingen University, to prove the positive ergonomic effect on humans and the supporting process to choose the suitable exoskeleton. The developed method and demonstrators enable the user to experience the positive ergonomic effects of exoskeletal support in lifting, holding and carrying processes in logistics and production. The new work system design method will contribute to the fact that employees can pursue their professional activity longer without substantial injuries or can be used more flexibly at different work stations. Also new work concepts, strategies and scenarios are opened up to reduce the risk of occupational accidents and to promote the compatibility of work for employees. A training module is being developed and evaluated with participants from industry and master students to build up competence.
Future intralogistics systems need to adapt flexibly to changing material flow requirements in line with future versatile factory environments, producing personalized products under the performance and cost conditions of today's mass production. Small batch sized down to a batch size of "1" lead to a high complexity in the design and economical manufacturing of these customized products. Intralogistics systems are integrated into higher-level areas (segment level) as well as into upsteam and downstream performance units (system-wide areas). This includes the logistic activities relevant for the system (organized according to storage, picking, transport) such as transportation or storage tasks of tools, semi-finished products, components, assemblies and containers, and waste. Today's centralized material flow control systems, which work based on predefined processes, are not capable and more specifically not suitable to deal with the arising complexity of changeable intralogistics systems. Autononomous, decentralized material flow control systems distribute the required decision-making and control processes on intelligent logistic entities. A major step for the development of an autonomous control method for hybrid intralogistics systems (manual, semi-automated and automated) is the development of a generic archetype for intralogistics systems regarding the system boundaries, elements and relations resulting in a descriptive model taking into account amongst others the time of demand, availability of resources, economic efficiency and technical performance parameters. The ESB Logistics Learning Factory at ESB Business School (Reutlingen University) serves for this as a close-to-reality development and validation environment.
The approach of self-organized and autonomous controlled systems offers great potential to meet new requirements for the economical production of customized products with small batch sizes based on a distributed, flexible management of dynamics and complexity within the production and intralogistics system. To support the practical application of self-organization for intralogistics systems, a catalogue of criteria for the evaluation of the self-organization of flexible logistics systems has been developed and validated, which enables the classification of logistics systems as well as the identification and evaluation of corresponding potentials that can be achieved by increasing the degree of self-organization.
Rapidly changing market conditions and global competition are leading to an increasing complexity of logistics systems and require innovative approaches with respect to the organisation and control of these systems. In scientific research, concepts of autonomously controlled logistics systems show a promising approach to meet the increasing requirements for flexible and efficient order processing. In this context, this work aims to introduce a system that is able to adjust order processing dynamically, and optimise intralogistics transportation regarding various generic intralogistics target criteria. The logistics system under consideration consists of various means of transport for autonomous decision-making and fulfilment of transport orders with defined source-sink relationships. The context of this work is set by introducing the Learning Factory Werk 150 with its existing hardware and software infrastructure and its defined target figures to measure the performance of the system. Specifically, the important target figures cost and performance are considered for the transportation system. The core idea of the system’s logic is to solve the problem of order allocation to specific means of transport by linking a Genetic Algorithm with a Multi-Agent System. The implementation of the developed system is described in an application scenario at the learning factory.
The world is becoming increasingly digital. People have become used to learning and interacting with the world around them through technology, accelerated even further by the Covid-19 pandemic. This is especially relevant to the generation currently entering education systems and the workforce. Considering digital aids and methods of learning are important for future learning. The increasing online learning needs open the case for integrating digital learning aspects such as serious gaming within education and training systems. Learning factories fall amongst the education and training systems that can benefit from integration with digital learning extensions. Digital capabilities such as digital twins and models further enable the exploration of integrating digital serious games as an extension of learning factories. Since learning factories are meant for a range of different learning, training, and research purposes, such serious games need to be adaptable across stakeholder perspectives to maximize the value gained from the time and cost invested into such design and development. Research into the development of adaptive serious games for multiple stakeholder perspectives must first determine whether such development can be developed that reaches the objectives set for different included stakeholder perspectives. The purpose of this research is to investigate this at the hand of the practical development of a digital adaptive serious game for stakeholder perspectives.
The increasing emergence of cyber-physical systems (CPS) and a global crosslinking of these CPS to cyber-physical production systems (CPPS) are leading to fundamental changes of future work and logistic systems requiring innovative methods to plan, control and monitor changeable production systems and new forms of human-machine-collaboration. Particularly logistic systems have to obey the versatility of CPPS and will be transferred to so-called cyber physical logistic systems, since the logistical networks will underlie the requirements of constant changes initiated by changeable production systems. This development is driven and enhanced by increasingly volatile and globalized market and manufacturing environments combined with a high demand for individualized products and services. Also nowadays mainly used centralized control systems are pushed to their limits regarding their abilities to deal with the arising complexity to plan, control and monitor changeable work and logistic systems. Decentralized control systems bear the potential to cope with these challenges by distributing the required operations on various nodes of the resulting decentralized control system.
Learning factories, like the ESB Logistics Learning Factory at ESB Business School (Reutlingen University), provide a wide range of possibilities to develop new methods and innovative technical solutions in a risk-free and close-to-reality factory environment and to transfer knowledge as well as specific competences into the training of students and professionals. To intensify the research and training activities in the field of future work and logistics systems, ESB Business School is transferring its existing production system into a CPPS involving decentralized planning, control and monitoring methods and systems, human-machine-collaboration as well as technical assistance systems for changeable work and logistics systems.
Learning factories can complement each other by training different competencies in the field of digitalisation and Industry 4.0. They depict diverse sections of the product development process and focus on various technologies. Within the framework of the International Association of Learning Factories (IALF), the operating organisations of learning factories exchange information on research, training and education. One of the aims is to develop joint projects. The article presents different concepts of cooperation between learning factories while focusing on the improvement of the development of learners competencies e.g. with a broader range of topics. A concept of a joint course between the learning factories in Bochum, Reutlingen and Darmstadt is explained in detail. The three learning factories will be examined with regard to their similarities and differences. The joint course focuses on the target group of students and the topic of digitalisation in the development and production of products. The course and its contents are explained in detail. The new learning approach is evaluated on the basis of feedback from the participants. Finally, challenges resulting from the cooperation between learning factories at different locations and with different operating models will be discussed.
Shorter product life cycles and emerging technologies in the field of industrial equipment are changing the prerequisites and circumstances under which the design of assembly and logistics systems take place. Planners have to adapt the production in accordance with the underlying product at a higher pace, oversee a more complex system and - most importantly - find the ideal solution for functional as well as social interaction between humans and machines in a cyber-physical system. Such collaborative work systems consider the individual capabilities and potentials of humans and machines to combine them in a manner that assists the operator during his daily work routine towards more productive, less burdening work. To be able to design work systems which act on that maxim, specific competences such as the ability of integrated process and product planning as well as systems and interface competence are required. The ESB Logistics Learning Factory trains students as well as professionals to gain such qualification by providing a close-to-reality learning environment based on a didactical concept which covers all relevant methods for ergonomic work system design and a state-of-the-art infrastructure composed of a manual assembly system, service robots, visual assistance systems, sensor-based work load monitoring and logistical resources. Group-based, activity oriented scenarios enable the participants to put the learnings into practice within their professional environments. By this, learning factories have an indirect impact on the transfer of proven best practices to the industry and thereby on the diffusion of the idea of human-centric working environment.
Close and safe interaction of humans and robots in joint production environments is technically feasible, however should not be implemented as an end in itself but to deliver improvement in any of a production system’s target dimensions. Firstly, this paper shows that an essential challenge for system integrators during the design of HRC applications is to identify a suitable distribution of available tasks between a robotic and a human resource. Secondly, it proposes an approach to determine task allocation by considering the actual capabilities of both human and robot in order to improve work quality. It matches those capabilities with given requirements of a certain task in order to identify the maximum congruence as the basis for the allocation decision. The approach is based on a study and subsequent generic description of human and robotic capabilities as well as a heuristic procedure that facilities the decision making process.
The early involvement of experiences gained through intelligence and data analysis is becoming increasingly important in order to develop new products, leading to a completely different conception of product creation, development and engineering processes using the advantages that the dedication of the digital twin entails. Introducing a novel stage gate process in order to be holistically anchored in learning factories adopting idea generation and idea screening in an early stage, beta testing of first prototypes, technical implementation in real production scenarios, business analysis, market evaluation, pricing, service models as well as innovative social media portals. Corresponding product modelling in the sense of sustainability, circular economy, and data analytics forecasts the product on the market both before and after market launch with the interlinking of data interpretation nearby in real-time. The digital twin represents the link between the digital model and the digital shadow. Additionally, the connection of the digital twin with the product provides constantly updated operating status and process data as well as mapping of technical properties and real-world behaviours. A future-networking product, by embedded information technology with the ability to initiate and carry out one's own further development, is able to interact with people and environments and thus is relevant to the way of life of future generations. In today's development work for this new product creation approach, on one hand, "Werk150" is the object of the development itself and on the other hand the validation environment. In the next step, new learning modules and scenarios for trainings at master level will be derived from these findings.
Decreasing batch sizes in production in line with Industrie 4.0 will lead to tremendous changes of the control of logistic processes in future production systems. Intelligent bins are crucial enablers to establish decentrally controlled material flow systems in value chain networks as well as at the intralogistics level. These intelligent bins have to be integrated into an overall decentralized monitoring and control approach and have to interact with humans and other entities just like other cyber-physical systems (CPS) within the cyber-physical production system (CPPS). To realize a decentralized material supply following the overall aim of a decentralized control of all production and logistics processes, an intelligent bin system is currently developed at the ESB Logistics Learning Factory. This intelligent bin system will be integrated into the self developed, cloud-based and event-oriented SES system (so-called “Self Execution System”) which goes beyond the common functionalities and capabilities of traditional manufacturing execution systems (MES).
To ensure a holistic integration of the intelligent bin for different material types into the SES framework, the required hard- and software components for the decentrally controlled bin system will be split into a common and an adaptable component. The common component represents the localization and network layer which is common for every bin, whereas the flexible component will be customizable to different requirements, like to the specific characteristics of the parts.
The production environment experiences copious challenges, but likewise discovers many new potential opportunities. To meet the new requirements, caused by the developments towards mass-customization, human-robot-cooperation (HRC) was identified as a key piece of technology and is becoming more and more important. HRC combines the strengths of robots, such as reliability, endurance and repeatability, with the strengths of humans, for instance flexibility and decision-making skills. Notwithstanding the high potential of HRC applications, the technology has not achieved a breakthrough in production so far. Studies have shown that one of the biggest obstacles for implementing HRC is the allocation of tasks. Another key technology that offers various opportunities to improve the production environment is Artificial Intelligence (AI). Therefore, this paper describes an AI supported method to improve the work organization in HRC in regards to the task-allocation. The aim of this method is to build a dynamic, semi-autonomous group work environment which keeps not just employee motivation at a high level, but also the product quality due to a decreased failure rate. The AI helps to detect the perfect condition in which the employee delivers the best performance and also supports at identifying the time when the worker leaves this optimal state. As soon as the employee reaches this trigger event, the allocation of the tasks adapts based on the identified stress. This adaptation aims to return the employee to the state of the optimal performance. In order to realize such a dynamic allocation, this method describes the creation of a pool with various interaction scenarios, as well as the AI supported recognition of the defined trigger event.
A seamless convergence of the digital and physical factory aiming in personalized Product Emergence Process (PPEP) for smart products within ESB Logistics Learning Factory at Reutlingen University.
A completely new business model with reference to Industrie4.0 and facilitated by 3D experience software in today's networked society in which customers expect immediate responses, delightful experience and simple solutions is one of the mission scenarios in the ESB Logistics Learning Factory at ESB Business School (Reutlingen University).
The business experience platform provides software solutions for every organization in the company respectively in the factory. An interface with dashboards, project management apps, 3D - design and construction apps with high end visualization, manufacturing and simulation apps as well as intelligence and social network apps in a collaborative interactive environment help the user to learn the creation of a value end to end process for a personalized virtual and later real produced product.
Instead of traditional ways of working and a conventional operating factory real workers and robots work semi-intuitive together. Centerpiece in the self-planned interim factory is the smart personalized product, uniquely identifiable and locatable at all times during the production process – a scooter with an individual colored mobile phone – holder for any smart phone produced with a 3D printer in lot size one. Smart products have in the future solutions incorporated internet based services – designed and manufactured - at the costs of mass products. Additionally the scooter is equipped with a retrievable declarative product memory. Monitoring and control is handled by sensor tags and a raspberry positioned on the product. The engineering design and implementation of a changeable production system is guided by a self-execution system that independently find amongst others esplanade workplaces.
The imparted competences to students and professionals are project management method SCRUM, customization of workflows by Industrie4.0 principles, the enhancements of products with new personalized intelligent parts, electrical and electronic selfprogrammed components and the control of access of the product memory information, to plan in a digital engineering environment and set up of the physical factory to produce customer orders. The gained action-orientated experience refers to the chances and requirements for holistic digital and physical systems.
In recent years, the numer of hybrid work systems using human robot collaboration (HRC) increased in industrial production environments - enhancing productivity while reducing work-related burden. Despite growing availability of HRC-suitable manipulation and safety technology, tools and techniques facilitating the design, planning and implementation process are still lacking. System engineers who strive to implement technically feasible, ergonomically meaningful and economically beneficial HRC application need to make design and technology decisions in various subject areas, whereas the design alternatives per morphological analysis is applied to establish a description model that can serve as both a supporting design guideline for future HRC application of value-adding, industrial quality as well as a tool to characterize and compare existing applications. It focuses on HRC within assembly processes, and illustrates the complexity of HRC applications in a comprehensible manner through its multi-dimensional structure. The morphology has been validated through its application on various existing industrial HRC applications, research demonstrators and interviews of experts from academia.