Refine
Document Type
- Journal article (37) (remove)
Has full text
- yes (37) (remove)
Is part of the Bibliography
- yes (37)
Institute
- Texoversum (37) (remove)
Publisher
- MDPI (9)
- Elsevier (3)
- dfv Mediengruppe (3)
- Deutscher Landwirtschaftsverlag (2)
- Springer (2)
- American Chemical Society (1)
- Asian Society of Business and Commerce Research (1)
- BWR media (1)
- Cambridge University Press (1)
- Deutscher Fachverlag (1)
The strong demand for a transformation of the textile and fashion industry towards sustainability requires a continuous implementation of the guiding principle of Education for Sustainable Development (ESD) in education and industry [1, 2]. In a first step of the European research project "Sustainable fashion curriculum at textile Universities in Europe - Development, Implementation and Evaluation of a Teaching Module for Educators" (Fashion DIET) a continuing education module shall be created to implement ESD as a guiding principle in university teaching. The research-based teaching and learning materials are delivered through an e-learning portal.
Thin, flat textile roofing offers negligible heat insulation. In warm areas, such roofing membranes are therefore equipped with metallized surfaces to reflect solar heat radiation, thus reducing the warming inside a textile building. Heat reflection effects achieved by metallic coatings are always accompanied by shading effects as the metals are non-transparent for visible light (VIS). Transparent conductive oxides (TCOs) are transparent for VIS and are able to reflect heat radiation in the infrared. TCOs are, e.g., widely used in the display industry. To achieve the perfect coatings needed for electronic devices, these are commonly applied using costly vacuum processes at high temperatures. Vacuum processes, on account of the high costs involved and high processing temperatures, are obstructive for an application involving textiles. Accepting that heat-reflecting textile membranes demand less perfect coatings, a wet chemical approach has been followed here when producing transparent heat-reflecting coatings. Commercially available TCOs were employed as colloidal dispersions or nanopowders to prepare sol-gel-based coating systems. Such coatings were applied to textile membranes as used for architectural textiles using simple coating techniques and at moderate curing temperatures not exceeding 130 °C. The coatings achieved about 90% transmission in the VIS spectrum and reduced near-infrared transmission (at about 2.5 µm) to nearly zero while reflecting up to 25% of that radiation. Up to 35% reflection has been realized in the far infrared, and emissivity values down to ε = 0.5777 have been measured.
Cotton contamination by honeydew is considered one of the significant problems for quality in textiles as it causes stickiness during manufacturing. Therefore, millions of dollars in losses are attributed to honeydew contamination each year. This work presents the use of UV hyperspectral imaging (225–300 nm) to characterize honeydew contamination on raw cotton samples. As reference samples, cotton samples were soaked in solutions containing sugar and proteins at different concentrations to mimic honeydew. Multivariate techniques such as a principal component analysis (PCA) and partial least squares regression (PLS-R) were used to predict and classify the amount of honeydew at each pixel of a hyperspectral image of raw cotton samples. The results show that the PCA model was able to differentiate cotton samples based on their sugar concentrations. The first two principal components (PCs) explain nearly 91.0% of the total variance. A PLS-R model was built, showing a performance with a coefficient of determination for the validation (R2cv) = 0.91 and root mean square error of cross-validation (RMSECV) = 0.036 g. This PLS-R model was able to predict the honeydew content in grams on raw cotton samples for each pixel. In conclusion, UV hyperspectral imaging, in combination with multivariate data analysis, shows high potential for quality control in textiles.
Flame-retardant finishing of cotton fabrics using DOPO functionalized alkoxy- and amido alkoxysilane
(2023)
In the present study, DOPO-based alkoxysilane (DOPO-ETES) and amido alkoxysilane (DOPO-AmdPTES) were synthesized by one-step and without by-products as halogen-free flame retardants. The flame retardants were applied on cotton fabric utilizing sol–gel method and pad-dry-cure finishing process. The flame retardancy, the thermal stability and the combustion ehaviour of treated cotton were evaluated by surface and bottom edge ignition flame test (according to EN ISO 15025), thermogravimetric analysis (TGA) and micro-scale combustion calorimeter (MCC). Unlike CO/DOPO-ETES sample, cotton treated with DOPO-AmdPTES nanosols exhibits self-extinguishing ehaviour with high char residue, an improvement of the LOI value and a significant reduction of the PHRR, HRC and THR compared to pristine cotton. Cotton finished with DOPO-AmdPTES reveals a semi-durability after ten laundering cycles keeping the flame-retardant properties unchanged. According to the results obtained from TGA-FTIR, Py-GC/MS and XPS, the major activity of flame retardant occurs in the condensed phase via catalytic induced char formation as physical barrier along with the activity in the gas phase derived mainly from the dilution effect. The early degradation of CO/DOPO-AmdPTES compared to CO/DOPO-ETES, triggered by the cleavage of the weak bond between P and C=O, as the DFT study indicated, provides the beneficial effect of this flame retardant on the fire resistance of cellulose.
Polyester fibers are widely employed in a multitude of sectors and applications from the technical textiles to everyday life thanks to their durability, strength, and flexibility. Despite these advantages, polyester lacks in dyeability, adhesion of coating, hydrophilicity, and it is characterized by a low wettability respect to natural fibers. On this regard, beyond the harmful hydrophobic textile finishings of polyester fabrics containing fluorine-compounds, and in order to avoid pre-treatments, such as laser irradiation to improve their surface properties, research is moving towards the development of fluorine-free and safer coatings. In this work, the (3-glycidyloxypropyl)trimethoxysilane (GPTMS) and various long alkyl-chain alkoxysilanes were employed for the fabrication in the presence of a catalyst of a water-based superhydrophobic finishing for polyester fabrics with a simple sol-gel, non-fluorinated, sustainable approach and the dip-pad-dry-cure method. The finished polyester fabrics surface properties were investigated by static and dynamic water repellency tests. Additionally, the resistance to common water-based liquids, abrasion resistance, moisture adsorption, and air permeability measurements were performed. Scanning electron microscopy was employed to examine the micro- and nano-morphology of the functionalized polyester fabrics surfaces. The obtained superhydrophobic finishings displayed high water-based stain resistance as well as good hydrophobicity after different cycles of abrasion.
Protective welding clothing must meet various requirements. Among other things, it must be flame-resistant, protect against splashes of metal or sparks and also ensure protection against radiant heat and UV light caused by exposure to the welding arc. The protection against molten metal splashes is directly related to the fabric weight per unit area of the protective welding clothing and the level of protection is normally determined by the number of molten metal droplets that fall on the fabric. The higher the weight per unit area, the greater the protection against welding spatter. However, increasing the fabric weight per unit area also leads to psychologically uncomfortable wearing and thus increasing the physical strain on the wearer. The required basis weight per unit area of protective welding clothing can be reduced by applying nanoparticles as a protective layer while preserving other indispensable properties.
The textile-finishing industry, is one of the main sources of persistent organic pollutants in water; in this regard, it is necessary to develop and employ new sustainable approaches for fabric finishing and treatment. This research study shows the development of an efficient and eco-friendly procedure to form highly hydrophobic surfaces on cotton fabrics using different modified silica sols. In particular, the formation of highly hydrophobic surfaces on cotton fabrics was studied by using a two-step treatment procedure, i.e., first applying a hybrid silica sol obtained by hydrolysis and subsequent condensation of (3-Glycidyloxypropyl) trimethoxy silane with different alkyl(trialkoxy) silane under acid conditions, and then applying hydrolyzed hexadecyltrimethoxysilane on the treated fabrics to further improve the fabrics’ hydrophobicity. The treated cotton fabrics showed excellent water repellency with a water contact angle above 150◦ under optimum treatment conditions. The cooperative action of rough surface structure due to the silica sol nanoparticles and the low surface energy caused by long-chain alkyl(trialkoxy)silane in the nanocomposite coating, combined with the expected roughness on microscale due to the fabrics and fiber structure, provided the treated cotton fabrics with excellent, almost super, hydrophobicity and water-based stain resistance in an eco-sustainable way.
For a holistic assessment of the interaction between the human body and tight fitted clothing, it is necessary to consider the mechanical properties of the body. Default avatars in CAD software are usually solid and do not take this interaction into account. For this purpose, a solid avatar is converted to a deformable one by using the soft body physics implementation in the simulation program Blender. The fit of a 3D garment on both avatars are compared, which allows a first evaluation of the differences between these approaches.
The requirements for textiles differ greatly depending on the area of application, whereby it often does not remain with only one required functionality. For example, in the field of functional clothing or protective clothing/PPE, it is necessary to protect the textile’s wearers from UV radiation. At the same time, self-cleaning effects offer certain advantages in that field. In addition, an antimicrobial effect in functional clothing can reduce the formation of unpleasant odors, and in PPE – especially in the healthcare sector – can contribute to the interruption of the chain of infection. One way to achieve these 3 desired functions in just one finishing step is to immobilize titanium dioxide (TiO2). However, TiO2 is viewed critically for application in the textile sector due to a REACH listing. Another disadvantage is that it only takes effect under UV radiation and is therefore not suitable for indoor use. Alternatively, photocatalysts such as doped zinc oxides (ZnO) can be used, which also exhibit catalytic activity through activation by visible light, which can lead to the killing of microorganisms and the degradation of organic soiling.
Die Anforderungen an Textilien unterscheiden sich je nach Anwendungsbereich stark, wobei es häufig nicht bei nur einer benötigten Funktionalität bleibt. Im Bereich der Funktions- oder Schutzkleidung bzw. PSA ist es z.B. nötig, die Träger der Kleidung vor UV-Strahlung zu schützen. Gleichzeitig bieten hier selbstreinigende Effekte gewisse Vorteile. Zudem kann eine antimikrobielle Wirkung im Bereich der Funktionskleidung die Bildung unangenehmer Gerüche vermindern, sowie im Bereich der PSA – besonders im Gesundheitswesen – zur Unterbrechung von Infektionsketten beitragen. Eine Möglichkeit, diese 3 gewünschten Funktionen in nur einem Ausrüstungsschritt zu erzielen, ist die Immobilisierung von Titandioxid (TiO2). Dieses wird aber aufgrund einer REACH-Listung kritisch für die Anwendung im textilen Sektor gesehen. Nachteilig ist zudem, dass es seine Wirkung nur unter UV-Einstrahlung entfaltet und damit nicht für den Innenbereich geeignet ist. Alternativ können Photokatalysatoren wie dotierte Zinkoxide (ZnO) verwendet werden, die auch durch Einstrahlung im Bereich des sichtbaren Lichts eine katalytische Aktivität aufweisen, die zur Abtötung von Mikroorganismen und zum Abbau organischer Verschmutzungen führen kann.