004 Informatik
Refine
Document Type
- Journal article (1)
- Conference proceeding (1)
Language
- English (2)
Has full text
- yes (2)
Is part of the Bibliography
- yes (2)
Institute
- Technik (2)
Publisher
- IEEE (2)
A fully passive RFID temperature sensor SoC with an accuracy of ±0.4 ◦C (3σ) from 0 ◦C to 125 ◦C
(2019)
This paper presents a fully passive 13.56 -MHz RFID temperature sensor system-on-chip. Its power management unit operates over a large temperature range using a zero temperature coefficient bias source. On-chip temperature sensing is accomplished with low-voltage, low-power CMOS circuitry, and time-domain signal processing. Two readout commands have been defined to study supply noise sensitivity: 1) standard readout, where just a single set of data is transferred to the reader and 2) serial readout, where several sets of data are sent one after the other to the reader. With the standard readout command, the sensor suffers from interference from the RFID command packet and outputs interference as well, while the sensor outputs no interference with the serial readout command. Measurements show that sensor resolution with serial readout is improved by a factor of approximately 16 compared to standard readout. The chip was fabricated in a standard 0.35-μm CMOS technology and chip-on-board mounted to a tuned RFID transponder coil on an aluminum core FR4 PCB substrate. Real time wireless temperature sensing has been demonstrated with a commercial HF RFID reader. With a two-point calibration, the SoC achieves a 3σ sensing accuracy of ±0.4 ◦C from 0◦C to 125 ◦C.
Reduction of power consumption of digital systems is a major concern especially in modern smart sensor systems. These systems are often only activated on request and their power consumption is therefore dominated by the idle-mode. Power reduction mechanisms such as clock or power gating reduce the activity or leakage in the purely digital circuits. We propose a novel adaptive clocking scheme that optimizes the energy demand using a fine-grained oscillator control on cycle-level. To evaluate our new approach, we analytically analyze the power consumption of the regarded system in comparison with available methods. The power of our new adaptive clocking is shown in an integrated smart sensor for capacitive measurements working in a passive wireless sensor node. Using our methods, we show that the energy demand of the example system is reduced even in the case of continuous measurements that demand for a high activity in the digital circuitry.