Refine
Year of publication
- 2019 (14) (remove)
Document Type
- Conference proceeding (12)
- Journal article (2)
Language
- English (14)
Has full text
- yes (14)
Is part of the Bibliography
- yes (14)
Institute
- Technik (14) (remove)
Publisher
- IEEE (14) (remove)
We propose a method for recognizing dynamic gestures using a 3D sensor. New aspects of the developed system include problem-adapted data conversion and compression as well as automatic detection of different variants of the same gesture via clustering with a suitable metric inspired by Jaccard metric. The combination of Hidden Markov Models and clustering leads to robust detection of different executions based on a small set of training data. We achieved an increase of 5% recognition rate compared to regular Hidden Markov Models. The system has been used for human-machine interaction and might serve as an assistive system in physiotherapy and neurological or orthopedic diagnosis.
In this paper, we address the novel EDP (Expert Design Plan) principle for procedural design automation of analog integrated circuits, which captures the knowledge-based design strategy of human circuit designers in an executable script, making it reusable. We present the EDP Player, which enables the creation and execution of EDPs for arbitrary circuits in the Cadence® Virtuoso® Design Environment. The tool provides a generic version of an instruction set, called EDPL (EDPLanguage), enabling emulation of a typical manual analog sizing flow. To automate the design of a Miller Operational Amplifier and to create variants of a Smart Power IC, several EDPs were implemented using this tool. Employing these EDPs leads to a strong reduction of design time without compromising design quality or reliability.
This paper presents an approach for the implementation of a modular and scalable power electronics device for controlling electric drives in the field of electric vehicles using wide bandgap semiconductor devices. The main idea is to achieve the required output currents or voltages by connecting adequately designed hardware modules in parallel or in series. This particular design is based on the fact that the single modules generate a continuous and specified output voltage from a given dc voltage, e.g. an intermediate circuit or battery voltage. The main benefit is, that different current or voltage requirements can be satisfied based on a single module thus decreasing development and production costs. The current paper focuses on the connection in parallel of such modules. A control architecture is illustrated and a first proof of concept is given.
This paper discusses the optimal control problem for increasing the energy efficiency of induction machines in dynamic operation including field weakening regime. In an offline procedure optimal current and flux trajectories are determined such that the copper losses are minimized during transient operations. These trajectories are useful for a subsequent online implementation.
In this work design rules for a novel brushless excitation system for externally excited synchronous machines are discussed. The concept replaces slip rings with a fullbridge active rectifier and a controller mounted on the rotor. An AC signal induced from the stator is used to charge the rotor DC link. The DC current for the rotor excitation is provided from this DC link source. Finite element analysis of an existing machine is used to analyze the practicability of the excitation system.
A novel brushless excitation concept for synchronous machines with a rotating power converter is proposed in this paper. The concept does not need an auxiliary winding or any other modification to the machine structure apart from an inverter with a DC link capacitor and a controller on the rotor. The power required for the rotor excitation is provided by injecting harmonics into the stator winding. Thus, a voltage in the field coil is induced. The rotor inverter is controlled such that the alternating current charges the DC link capacitor. At the same time the inverter supplies the DC field current to the field coil. The excitation concept is first developed in theory, then presented using an analytical model and FEA, and lastly investigated with a prelimininary experimental setup.
Novel design for a coreless printed circuit board transformer realizing high bandwidth and coupling
(2019)
Rogowski coils offer galvanic isolation and can measure alternating currents with a high bandwidth. Coreless printed circuit board (PCB) transformers have been used as an alternative to limit the additional stray inductance if a Rogowski coil can not be attached to the circuit. A new PCB transformer layout is proposed to reduce cost, decrease additional stray inductance, increase the bandwidth of current measurements and simplify the integration into existing designs.
Improved inductive feed-forward for fast turn-on of power semiconductors during hard switching
(2019)
A transformer is used to increase the gate voltage during turn-on, thus reducing the necessary bias voltage of the gate driver. Counteracting the voltage dependency of the gate capacitance of high-voltage power devices, faster transitions are possible. The additional transformer only slighly increases the over-voltage during turn-off.
Nowadays, the demand for a MEMS development/design kit (MDK) is even more in focus than ever before. In order to achieve a high quality and cost effectiveness in the development process for automotive and consumer applications, an advanced design flow for the MEMS (micro electro mechanical systems) element is urgently required. In this paper, such a development methodology and flow for parasitic extraction of active semiconductor devices is presented. The methodology considers geometrical extraction and links the electrically active pn junctions to SPICE standard library models and subsequently extracts the netlist. An example for a typical pressure sensor is presented and discussed. Finally, the results of the parasitic extraction are compared with fabricated devices in terms of accuracy and capability.
Due to the lack of sophisticated component libraries for microelectromechanical systems (MEMS), highly optimized MEMS sensors are currently designed using a polygon driven design flow. The advantage of this design flow is its accurate mechanical simulation, but it lacks a method for an efficient and accurate electrostatic analysis of parasitic effects of MEMS. In order to close this gap in the polygon-driven design flow, we present a customized electrostatic analysis flow for such MEMS devices. Our flow features a 2.5D fabrication-process simulation, which simulates the three typical MEMS fabrication steps (namely deposition of materials including topography, deep reactive-ion etching, and the release etch by vapor-phase etching) very fast and on an acceptable abstraction level. Our new 2.5D fabrication-process simulation can be combined with commercial field-solvers such as they are commonly used in the design of integrated circuits. The new process simulation enables a faster but nevertheless satisfactory analysis of the electrostatic parasitic effects, and hence simplifies the electrical optimization of MEMS.