Refine
Document Type
- Conference proceeding (163) (remove)
Is part of the Bibliography
- yes (163) (remove)
Institute
- ESB Business School (163) (remove)
Publisher
- Association for Information Systems (18)
- IEEE (18)
- Springer (17)
- Elsevier (16)
- Stellenbosch University (10)
- Curran Associates Inc. (5)
- Leibniz-Universität Hannover (5)
- Gesellschaft für Informatik e.V (4)
- Verlag IFZ – Hochschule Luzern (4)
- Academy of Management (3)
Wasted paradise – imagining the Maldives without the garbage island of Thilafushi : Version 1.2
(2016)
To address the high level of waste production in the Maldives, the local government decided to transform the coral island of Thilafushi into an immense waste dumb in 1992. Meanwhile, each day, 330 tons of waste is ferried to Thilafushi. The policy had the positive consequence of relieving the garbage burden in Malé, the main island, and surrounding tourist atolls. However, it can also lead to serious environmental and economic damage in the long range. First, the garbage is in visual range of one of the most prominent tourist destinations. Second, if the wind blows a certain way, unfiltered fumes from burning waste travels to tourist atolls. Third, water quality can erode as hazardous waste from batteries and other toxic waste is floating in the ocean. Over time, these effects can accumulate to significantly hamper the number of tourists that travel to the Maldives – one of the state’s main sources of financial income. In our paper, we lay out the situation in more detail and translate it into a simulation model. We test different policies to propose the Maldives government how to better solve the waste problem.
Veränderungen der Rolle von Controllern in Großkonzernen - Ergebnisse einer empirischen Erhebung
(2021)
Die anhaltende Diskussion über die Rolle von Management Accountants (MA) führt häufig dazu, dass die Rolle des Business Partners (BP) als die Rolle der Wahl angesehen wird. Dennoch scheinen viele Wissenschaftler und Praktiker davon auszugehen, dass diese Rolle den Managern und MA klar ist, dass sie für sie sinnvoll ist und alle Manager und MA ihr zustimmen und sie umsetzen. Unstimmigkeiten zwischen der tatsächlichen Rolle, der wahrgenommenen und der erwarteten Rolle könnten zu Identitäts- und Rollenkonflikten führen. Dieser Beitrag basiert auf einer quantitativen empirischen Studie in einem großen deutschen High-Tech-Unternehmen im Jahr 2019, dessen Top-Management sich für die Einführung der BP-Rolle entschied.
Product engineering and subsequent phases of product lifecycles are predominantly managed in isolation. Companies therefore do not fully exploit potentials through using data from smart factories and product usage. The novel intelligent and integrated Product Lifecycle Management (i²PLM) describes an approach that uses these data for product engineering. This paper describes the i²PLM, shows the cause-and-effect relationships in this context and presents in detail the validation of the approach. The i²PLM is applied and validated on a smart product in an industrial research environment. Here, the subsequent generation of a smart lunchbox is developed based on production and sensor data. The results of the validation give indications for further improvements of the i²PLM. This paper describes how to integrate the i²PLM into a learning factory.
Forecasting demand is challenging. Various products exhibit different demand patterns. While demand may be constant and regular for one product, it may be sporadic for another, as well as when demand occurs, it may fluctuate significantly. Forecasting errors are costly and result in obsolete inventory or unsatisfied demand. Methods from statistics, machine learning, and deep learning have been used to predict such demand patterns. Nevertheless, it is not clear for what demand pattern, which algorithm would achieve the best forecast. Therefore, even today a large number of models are used to forecast on a test period. The model with the best result on the test period is used for the actual forecast. This approach is computationally and time intensive and, in most cases, uneconomical. In our paper we show the possibility to use a machine learning classification algorithm, which predicts the best possible model based on the characteristics of a time series. The approach was developed and evaluated on a dataset from a B2B-technical-retailer. The machine learning classification algorithm achieves a mean ROC-AUC of 89%, which emphasizes the skill of the model.
Intermittent time series forecasting is a challenging task which still needs particular attention of researchers. The more unregularly events occur, the more difficult is it to predict them. With Croston’s approach in 1972 (1.Nr. 3:289–303), intermittence and demand of a time series were investigated the first time separately. He proposes an exponential smoothing in his attempt to generate a forecast which corresponds to the demand per period in average. Although this algorithm produces good results in the field of stock control, it does not capture the typical characteristics of intermittent time series within the final prediction. In this paper, we investigate a time series’ intermittence and demand individually, forecast the upcoming demand value and inter-demand interval length using recent machine learning algorithms, such as long-short-term-memories and light-gradient-boosting machines, and reassemble both information to generate a prediction which preserves the characteristics of an intermittent time series. We compare the results against Croston’s approach, as well as recent forecast procedures where no split is performed.
Strategic alliances have become important strategic options for firms to achieve competitive advantage. Yet, there are many examples of alliance failures. Scholars have studied this phenomenon and identified many reasons for alliance failure, including lack of trust between the partnering firms. Paradoxically, the concept of trust is still not fully understood, specifically how and under what conditions trust comes to break down within the broader process of alliance building. We synthesize a process model that describes the “alliance capability”, including trust, openness, partner contributions, and relational rents. We then translate this framework into a formal simulation model and analyze it thoroughly. In analyzing trust dynamics we identify and explore a tipping boundary, separating a regime of alliance failures and successes. We apply our core findings to openness strategies – decisions about how much knowledge to share with partners. Our analyses reveal that strategies informed by a static mental model of trust, contributions, and openness, under undervalue openness. Further, too little openness risks early failure due to the being trapped in a vicious cycle of trust depletion.
Coopetitive endeavors offer valuable strategic options for firms. Yet, many of them are failure-prone as partners must balance collective and private interest. While interpartner trust is considered central for alliance success, paradoxically, the role and dynamics of trust is still not understood. We synthesize a computational model, capturing relational dynamics of an alliance, encompassing coevolution of trust, partner contributions, and (relative) alliance interactions. Analyzing alliance dynamics using simulation we find and explore a tipping boundary, separating a regime of alliance failure and success. We identify implications for collaborative (aspirations) and private strategies (openness). Our analyses reveal that strategies informed by a static mental model of partner trust, contributions, and openness tend to yield subpar alliance results and hidden failure-risk. We discuss implications for management theory.
Industrial practice is characterized by random events, also referred to as internal and external turbulences, which disturb the target-oriented planning and execution of production and logistics processes. Methods of probabilistic forecasting, in contrast to single value predictions, allow an estimation of the probability of various future outcomes of a random variable in the form of a probability density function instead of predicting the probability of a specific single outcome. Probabilistic forecasting methods, which are embedded into the analytics process to gain insights for the future based on historical data, therefore offer great potential for incorporating uncertainty into planning and control in industrial environments. In order to familiarize students with these potentials, a training module on the application of probabilistic forecasting methods in production and intralogistics was developed in the learning factory 'Werk150' of the ESB Business School (Reutlingen University). The theoretical introduction to the topic of analytics, probabilistic forecasting methods and the transition to the application domain of intralogistics is done based on examples from other disciplines such as weather forecasting and energy consumption forecasting. In addition, data sets of the learning factory are used to familiarize the students with the steps of the analytics process in a practice-oriented manner. After this, the students are given the task of identifying the influencing factors and required information to capture intralogistics turbulences based on defined turbulence scenarios (e.g. failure of a logistical resource) in the learning factory. Within practical production scenario runs, the students apply probabilistic forecasting using and comparing different probabilistic forecasting methods. The graduate training module allows the students to experience the potentials of using probabilistic forecasting methods to improve production and intralogistics processes in context with turbulences and to build up corresponding professional and methodological competencies.
Ambitious goals set by the European Union strategy towards the emission reduction of multimodal logistic chains and new requirements for intermodal terminals set by the evolution of customer needs, contribute to a shift in the driver for the infrastructure development: from economy of scale to economy of density. This paper aims to present an innovative method for designing a process oriented technology chain for intermodal terminals in order to fulfill these new demanding requirements. The results of the case study of the Zero Emission Logistic Terminal Reutlingen are presented, highlighting how this particular context enables the design and development of a modular concept, paving the way for the generalization of the findings towards the transfer to similar contexts of other European cities.
In this paper it is first identified the trade-off among costs, flexibility and performances of autonomous robotic solutions for material handling processes, where adding value with automation is not as trivial as in production processes: hence the requirement for automated solutions to be simple, lean and efficient becomes even stricter. Then a method for modelling and comparing differential performances and costs of manual and autonomous solutions is developed. As a result of the method, a smart man-machine collaborative interface is designed and its impact evaluated on a specific case of study. Results are then generalized and prove the strong conclusions that in unconstrained environments, where full standardization cannot be achieved, the risk of investing in autonomous solutions can only be mitigated by creating a fast and smart man-machine collaborative interface.
While there has been increased digitization of private homes, only little has been done to understand these specific home technologies, how they serve consumers, among other issues. “Smart home technology” (SHT) refer to a wide range of artifacts from cleaning aids to energy advisors. Given this breadth, clarity surrounding the key characteristics and the multi-faceted impact of SHT is needed to conduct more directed research on SHT. We propose a taxonomy to help outline the salient intended outcomes of SHT. Through a process involving five iterations, we analyzed and classified 79 technologies (gathered from literature and industry reports). This uncovered seven dimensions encompassing 20 salient characteristics. We believe these dimensions/characteristics will help researchers and organizations better design and study the impacts of these technologies. Our long-term agenda is to use the proposed taxonomy for an exploratory inquiry to understand tensions occurring when personal and sustainability-related outcomes compete.
Distributed ledger technologies such as the blockchain technology offer an innovative solution to increase visibility and security to reduce supply chain risks. This paper proposes a solution to increase the transparency and auditability of manufactured products in collaborative networks by adopting smart contract-based virtual identities. Compared with existing approaches, this extended smart contract-based solution offers manufacturing networks the possibility of involving privacy, content updating, and portability approaches to smart contracts. As a result, the solution is suitable for the dynamic administration of complex supply chains.
The time has come : application of artificial intelligence in small- and medium-sized enterprises
(2022)
Artificial intelligence (AI) is not yet widely used in small- and medium-sized industrial enterprises (SME). The reasons for this are manifold and range from not understanding use cases, not enough trained employees, to too little data. This article presents a successful design-oriented case study at a medium-sized company, where the described reasons are present. In this study, future demand forecasts are generated based on historical demand data for products at a material number level using a gradient boosting machine (GBM). An improvement of 15% on the status quo (i.e. based on the root mean squared error) could be achieved with rather simple techniques. Hence, the motivation, the method, and the first results are presented. Concluding challenges, from which practical users should derive learning experiences and impulses for their own projects, are addressed.
Compared to the automotive sector, where automation is the rule, in many other less standardized sectors automation is still the exception. This could soon hurt the productivity of industrialized countries, where the unemployment is low and the population is aging. Phenomena like the recent downfall in productivity, due to lockdowns and social distancing for prevention of health hazards during the COVID19 pandemic, only add to the problem. For these reasons, the relevance, motivation and intention for more automation in less standardized sectors has probably never been higher. However, available statistics say that providers and users of technologies struggle to bring more automation into action in automation-unfriendly sectors. In this paper, we present a decision support method for investment in automation that tackles the problem: the STIC analysis. The method takes a holistic and quantitative approach tying together technological, context-related and economic input parameters and synthetizing them in a final economic indicator. Thanks to the modelling of such parameters, it is possible to gain sensibility on the technological and/or process adjustments that would have the highest impact on the efficiency of the automation, thereby delivering value for both technology users and technology providers.
The success of an autonomous robotic system is influenced by several interdependent factors not easily identifiable. This paper is set to lay the foundation of a new integrated approach in order to deeply examine all the parameters and understand their contribution to success. After introducing the problem, two cutting edge autonomous systems for the process of unloading of containers will be presented. Then the STIC analysis, a recently developed method for modelling and interpreting all the parameters, will be introduced. The preliminary results of applying such a methodology to a first study case, based on one of the two systems available to the authors, will be shortly presented. Future research is in the end recommended in order to prove that this methodology is the only way to efficiently and effectively mitigate the risk that stops potential users from investing in autonomous systems in the logistics sector.
In standardized sectors such as the automotive, the cost-benefit ratio of automation solutions is high as they contribute to increase capacity, decrease costs and improve product quality. In less standardized application fields, the contribution of automation to improvements in capacity, cost and quality blurs. The automation of complex and unstructured tasks requires sophisticated, expensive and low-performing systems, whose impact on product quality is oftentimes not directly perceived by customers. As a result, the full automation of process chains in the general manufacturing or the logistic sectors is often a sub optimal solution. Taking the distance from the false idea that a process should be either fully automated, or fully manual, this paper presents a novel heuristic method for design of lean human-robot interaction, the Quality Interaction Function Deployment, with the objective of the “right level of automation”. Functions are divided among human and automated agents and several automation scenarios are created and evaluated with respect to their compliance to the requirements of all process´ stakeholders. As a result, synergies among operators (manual tasks) and machines (automated tasks) are improved, thus reducing time-losses and increasing productivity.
This paper describes the design and outcomes of an experimental study that addresses stock-and-flow-failure from a cognitive perspective. It is based on the assumption that holistic (global) and analytic (local) processing are important cognitive mechanisms underlying the ability to infer the behavior of dynamic systems. In a stock-and-flow task that is structurally equivalent to the department store task, we varied the format in which participants are primed to think about an environmental system, in particular whether they are primed to concentrate on lower-level (local) or higher-level (global) system elements. 148 psychology, geography and business students participated in our study. Students’ answers support our hypothesis that global processing increases participants’ ability to infer the overall system behavior. The beneficial influence of global presentation is even stronger when data are presented numerically rather than in the form of a graph. Our results suggest presenting complex dynamic systems in a way that facilitates global processing. This is particularly important as policy-designers and decision makers deal with complex issues in their everyday and professional life.
During the first years of their employment, the graduates are a liability to industry. The employer goes an extra mile to bridge the gap between university-exiting and profitable employment of engineering graduates. Unfortunately some cannot take this risk. Given this scenario, this paper presents a learning factory approach as a platform for the application of knowledge so as to develop the required engineering competences in South African engineering graduates before they enter the labour market. It spells out the components of a Stellenbosch University Learning Factory geared towards production of engineering graduates with the required industrial skills. It elaborates on the didactics embedded in the learning factory environment, tailor-made to produce engineers who can productively contribute to the growth of the industry upon exiting the university.
Internet of things innovations and the industrial internet these days become more and more decisive factors of future success for companies. Especially manufacturing oriented SME will face the challenge to develop innovative technology driven business models alongside technology innovations in this field which will be essential for future competitiveness. Failing in developing these technology driven business models in an internationally highly competitive environment will have a serious impact both on companies and on the society. Hence, securing economic stability and success of these technology driven business models is an indispensable task. To identify challenges for innovative industrial internet business models first it is necessary to understand what the industrial internet means to the leading parties and applying companies and start-ups in the field. Second, challenges from general business model development will be outlined. In a third step risks and challenges in business model development will be discussed with regard to the special characteristics of technology driven business models in the context of the industrial internet and the important role of the technological key component of the business model. Especially the capability to deal with an integrated consideration of the indivisible linked dimensions of economic and technological aspects of these business models is questioned. In the fourth place the specific challenges for industrial internet business models are derived. On the basis of these results it is also discussed what might be done to handle these challenges successfully with the goal to turn them into chances. The need for future research on the integration of the risk management perspective into the development of these technology driven business models is derived. This will help established companies and start-ups to realize great technological innovations for the industrial internet in sound and successful innovative business models.
The paper studies the deciding parameters that influence business students' selection of internships in Germany. The findings are based on literature research and a survey amongst students and company representatives and asks to rate the importance of 24 different aspects of internships. The benefits and negative impacts of internships on students, companies and universities are discussed in detail. The results of different demographic groups are compared.
Since project managers still face problems in managing interorganizational R&D projects, it is a promising approach to manage these projects project-culturally-aware. However, an important prerequisite for a project-culture-aware management is that the involved individual organizations pursue a collaborative strategy. Therefore, our article provides a conceptual approach including a new tool, the Collaborative Iron Triangle, which supports both project sponsors and managers in different phases of the collaboration process to pursue a collaborative strategy in interorganizational R&D projects.
The 17 SDGs, as agreed upon by the international community, are designed to be implemented across all levels of human activity. Alongside the level of international politics, this also includes the local levels, national politics, wider society, and the economic sphere. Many channels are called on to further implementation, including the transfer of technology to developing and emerging countries. As the patent holders, this must include the active participation of companies. While the literature examines the important role of technology transfer in North-South business-to-business (B2B) partnerships, studies on the technology transfer between European and African companies are scarce. Therefore, in this study we use original data from 26 interviews conducted with managers engaged in sales partnerships between German manufacturers and their distributors in African markets to examine the existence and forms of technology transfer. We find that training and marketing excellence are the predominant forms of technology transfer and based on that suggest a refinement of established frameworks on B2B technology transfer.
Facing ever-looming climate change, studying the drivers for individuals' Information Systems (IS) Use to reduce environmental harm gains momentum. While extant research on the antecedents of sustainable IS Use has focused on specific theories, interventions, contexts, and technologies, a holistic understanding has become increasingly elusive, with a synthesis remaining absent. We employ a systematic literature review methodology to shed light on the driving antecedents for sustainable IS Use among individual consumers. Our results build on findings of 29 empirical studies drawn from 598 articles retrieved from our premier outlets and a forward/backward search. The analysis reveals six salient complementary antecedents: Relief, Empowerment, Default, User-centricity, Salience, and Encouragement. We recommend considering these concepts when developing, deploying, promoting, or regulating digital technologies to mitigate individual consumers' emissions. Along with memorable and implementable concepts, our theoretical framework offers a novel conceptualization and four promising avenues for researchers on sustainable IS Use.
This article explores the question of how sustainability and labour law are interrelated. The modern world of work is characterised by the growing social and environmental responsibility of companies. Especially in the post-COVID era, sustainability also plays an increasingly important role in the corporate context, which is also noticeable in the so-called ‘war for talent’. Achieving personal career goals is no longer enough for employees today. Corporate values and in particular the so-called ESG criteria (Environment, Social, Governance) are thus also becoming increasingly important in the employment relationship and in corporate reporting requirements. In terms of social sustainability, labour law instruments can, for example, promote the creation of a discrimination-free working environment, the introduction of flexible working time models or the protection of whistleblowers. From an ecological perspective, labour regulations are also suitable for implementing ‘green mobility’ and other measures to reduce companies’ ecological footprints. Working from home, which experienced a huge boom during the COVID-19 pandemic, is also sustainable, especially from an ecological point of view. Appropriate consideration of these sustainable work tools in future corporate social responsibility (CSR) strategies not only creates a competitive advantage but can also be beneficial in recruitment.
The fifth generation of mobile communication (5G) is a wireless technology developed to provide reliable, fast data transmission for industrial applications, such as autonomous mobile robots and connect cyber-physical systems using Internet of Things (IoT) sensors. In this context, private 5G networks enable the full performance of industrial applications built on dedicated 5G infrastructures. However, emerging wireless communication technologies such as 5G are a complex and challenging topic for training in learning factories, often lacking physical or visual interaction. Therefore, this paper aims to develop a real-time performance monitoring system of private 5G networks and different industrial 5G devices to visualise the performance and impact factors influencing 5G for students and future connectivity experts. Additionally, this paper presents the first long-term measurements of private 5G networks and shows the performance gap between the actual and targeted performance of private 5G networks.
IT platforms as the foundation of digitized processes and products are vital in a digital economy. However, many companies’ platforms are liabilities, not strategic assets because of their complexity. Consequently, companies initiate IT complexity reduction programs. But these technology-centric programs at best provide temporary relief. Soon after, companies’ platforms become just as complex as before. Based on four case studies, we identify three non-technical drivers of platform complexity: (1) Lacking awareness of consequences business decisions have on platform complexity, (2) Lacking motivation to avoid platform complexity, (3) Lacking authority to protect platforms from complexity. We propose measures to address these drivers that can help achieve more sustainable impact on platform complexity: (1) Removing information asymmetries between those creating complexity and those dealing with complexity, (2) Redefining incentives to include long-term effects on platform complexity, (3) Redressing power imbalances between those who create complexity and those who have to manage it.
Imagine a world in which the search for tomorrow's trends is not subject to a long and laborious data search but is possible with a single mouse click. Through the use of artificial intelligence (AI), this reality is made possible and is to be further advanced through research. The study therefore aims to provide an initial overview of the young research field. Based on research, expert interviews, company and student surveys, current application possibilities of AI in the innovation process (defined as Smart Innovation), existing challenges that slow down the further development are discussed in more detail and future application possibilities are presented. Finally, a recommendation for action is made for business, politics and science to help overcome the current obstacles together and thus drive the future of Smart Innovation.
Imagine a world in which the search for tomorrow's trends of (software) products is not subject to a long and laborious data search but is possible with a single mouse click. Through the use of artificial intelligence (AI), this reality is made possible and is to be further advanced through research. The study therefore aims to provide an initial overview of the young research field. Based on research, expert interviews, company and student surveys, current application possibilities of AI in the innovation process (defined as Smart Innovation), existing challenges that slow down the further development are discussed in more detail and future application possibilities are presented. Finally, a recommendation for action is made for business, politics and science to help overcome the current obstacles together and thus drive the future of Smart Innovation.
Companies are becoming aware of the potential risks arising from sustainability aspects in supply chains. These risks can affect ecological, economic or social aspects. One important element in managing those risks is improved transparency in supply chains by means of digital transformation. Innovative technologies like blockchain technology can be used to enforce transparency. In this paper, we present a smart contract-based Supply Chain Control Solution to reduce risks. Technological capabilities of the solution will be compared to a similar technology approach and evaluated regarding their benefits and challenges within the framework of supply chain models. As a result, the proposed solution is suitable for the dynamic administration of complex supply chains.
The planning and control of intralogistics systems in line with versatile production systems of smart factories requires new approaches and methods to cope with changing requirements within future factories. The planning of intralogistics can no longer follow a static, sequential approach as in the past since the planning assumptions are going to change in a high frequency. Reasons for these constant changes are amongst others external turbulences like rapidly changing market conditions, decreasing batch sizes down to customer-specific products with a batch size of one and on the other hand internal turbulences (like production and logistic resource breakdowns) affecting the production system. This paper gives an insight into research approaches and results how capabilities of intelligent logistical objects (intelligent bins, autonomous transport systems etc.) can be used to achieve a self-organized, cost and performance optimized intralogistics system with autonomously controlled process execution within versatile production environments. A first consistent method has been developed which has been validated and implemented within a scenario at the pilot factory Werk150 at the ESB Business School (Reutlingen University). Based on the incoming production orders, the method of the Extended Profitability Appraisal (EPA) covering the work system value to define the most effective work system for order fulfilment is applied. To derive the appropriate intralogistics processes, an autonomous control method involving principles of decentralized and target-oriented decision-making (e.g. intelligent bins are interacting with autonomously controlled transport systems to fulfil material orders of assembly workstations) has been developed and applied to achieve a target-optimized process execution. The results of the first stage research using predefined material sources and sinks described in this paper is going to set the basis for the further development of a self-organized and autonomously controlled method for intralogistics systems considering dynamic source and sink relations. By allowing dynamic shifts of production orders in the sense of dynamic source and sink relations the cost and performance aims of the intralogistics system can be directly aligned with the aims of the entire versatile production system in the sense of self-organized and autonomously controlled systems.
Die zunehmende Durchdringung von cyber-physischen Systemen und deren Vernetzung zu cyberphysischen Produktionssystemen (CPPS) führt zu fundamentalen Veränderungen von zukünftigen Montage-, Fertigungs- und Logistiksystemen, welche innovative Methoden zur Planung, Steuerung und Kontrolle von wandlungsfähigen Produktionssystemen erfordern. Zukünftige logistische Systeme werden dabei den Anforderungen einer hochfrequenten Veränderung und Re-Konfiguration ausgelöst durch wandlungsfähige Produktionssysteme für individualisierte Produkte und kleinen Losgrößen unterliegen. Der Einsatz dezentraler Steuerungssysteme, bei denen die komplexen Planungs-, Steuerungs- und Kontrollprozesse auf zahlreiche Knoten und Entitäten des entstehenden Steuerungssystems verteilt werden, bietet ein großes Potential, den Anforderungen in cyber-physischen Logistiksystemen gerecht zu werden. Eine zentrale Herausforderung ist dabei die echtzeitfähige Steuerung und Re-Konfiguration von sogenannten hybriden Logistiksystemen, welche u.a. durch die Kollaboration von Mensch und Maschine, der Kombination verschiedenartiger Fördermittel sowie verschiedenartiger Steuerungsarchitekturen geprägt sind und darüber hinaus auf hybriden Entscheidungsfindungsprozessen beruhen, welche die Fähigkeiten von Menschen und (cyber-physischen) Systemen synergetisch nutzen.
Lernfabriken, wie die ESB Logistik-Lernfabrik an der ESB Business School (Hochschule Reutlingen), bieten dabei weitreichende Möglichkeiten, diese innovativen Methoden, Systeme und technischen Lösungen in einer industrienahen und risikofreien Fabrikumgebung zu entwickeln sowie in die Ausbildung von Studierenden und Weiterbildung von Teilnehmern aus der Industrie zu transferieren. Um die Forschung, Lehre sowie Aus- und Weiterbildung im Bereich zukünftiger Montage-, Fertigungs- und Logistiksysteme auszuweiten, wird das bestehende Produktionssystem der ESB Logistik-Lernfabrik im Rahmen verschiedenster Forschungs- und Studentenprojekte schrittweise in ein dezentral gesteuertes cyber-physisches Produktionssystem, basierend auf einer ereignisorientierten, cloud-basierten und dezentralen Steuerungsarchitektur, überführt.
Governments and public institutions increasingly embrace digital opportunities to involve citizens in public issues and decision making. While public participation is generally seen as an important and promising venture, the design of the participation processes and the utilized digital infrastructure poses challenges, especially to the public sector. Instead of limiting conceptual guidance and exchange to one domain, we therefore develop a taxonomy for digital involvement projects that unites the domains of e-participation, citizen science and crowd-X. Embedded in a design science research approach, we follow an iterative design process to elaborate the key characteristics of a digital involvement project based on the participation process, its individuals and digital infrastructure. Through evaluating the artifact in a focus group with domain practitioners, we find support for the usefulness of our taxonomy and its ability to provide guidance and a basis for discussion of digital involvement projects across domains.
Forecasting demand is challenging. Various products exhibit different demand patterns. While demand may be constant and regular for one product, it may be sporadic for another, as well as when demand occurs, it may fluctuate significantly. Forecasting errors are costly and result in obsolete inventory or unsatisfied demand. Methods from statistics, machine learning, and deep learning have been used to predict such demand patterns. Nevertheless, it is not clear for what demand pattern, which algorithm would achieve the best forecast. Therefore, even today a large number of models are used to forecast on a test period. The model with the best result on the test period is used for the actual forecast. This approach is computationally and time intensive and, in most cases, uneconomical. In our paper we show the possibility to use a machine learning classification algorithm, which predicts the best possible model based on the characteristics of a time series. The approach was developed and evaluated on a dataset from a B2B-technical-retailer. The machine learning classification algorithm achieves a mean ROC-AUC of 89%, which emphasizes the skill of the model.
Die Digitalisierung und Nachhaltigkeit werden die Erwartungen und Anforderungen an die Controller dauerhaft und umfassend verändern. Die Lehre hat für den Rollenwandel eine hohe Relevanz. Eine auf die veränderten Anforderungen abgestimmte Ausbildung bietet den Unternehmen die Möglichkeit, Controller mit diesen veränderte Rollenprofilen für ihre Organisation zu gewinnen. Für die Absolventen mit dem Berufswunsch Controlling sichert das veränderte Rollenprofil ihre langfristige Arbeitsmarktfähigkeit. Für den Rollenwandel selbst kann diese als Treiber verstanden werden.
Trotz der Bedeutung der Lehre für den Rollenwandel gibt es dazu bislang wenige Forschungsergebnisse zur konkreten Abbildung der Rollen in der Lehre. Es stellt sich daher die Frage, wie Hochschulen in ihren Studiengängen die Rollen grundsätzlich abbilden und mit welcher Intensität sowie Kombinationen die Rollen gelehrt werden. Diese Forschungsfrage wird anhand einer Analyse von controllingspezifischen Masterstudiengängen und deren Modulhandbücher evaluiert und diskutiert.
Im Ergebnis stellt sich der Rollenwandel in der Controllinglehre sehr heterogen dar. Es dominiert die Vermittlung der klassische Controllerrolle gefolgt von der Business Partner Rolle. Lehrinhalte bezogen auf die Rollen des digitalen Controllers oder Risikocontrollers sind schwach ausgeprägt. Für die Übernahme einer Controllerrolle im Nachhaltigkeitsmanagement existiert kaum ein Lehrangebot. Diese Ergebnisse sollen zum Diskurs über den Rollenwandel und die Gestaltung der Lehre im Controlling beitragen.
Since its first publication in 2015, the learning factory morphology has been frequently used to design new learning factories and to classify existing ones. The structuring supports the concretization of ideas and promotes exchange between stakeholders.
However, since the implementation of the first learning factories, the learning factory concept has constantly evolved.
Therefore, in the Working Group "Learning Factory Design" of the International Association of Learning Factories, the existing morphology has been revised and extended based on an analysis of the trends observed in the evolution of learning factory concepts. On the one hand, new design elements were complemented to the previous seven design dimensions, and on the other hand, new design dimensions were added. The revised version of the morphology thus provides even more targeted support in the design of new learning factories in the future.
Recently, blockchain-based tokens have earned an important role in fields such as the art market or online gaming. First approaches exist, which adopt the potentials of blockchain tokens in supply chain management to increase transparency, visibility, automation, and disintermediation of supply chains. In context, the tokenization of assets in supply chains refers to the practice of creating virtual representations of physical assets on the blockchain. Solutions in supply chain management based on the tokenization of assets vary in terms of application objectives, token types, asset characteristics, as well as the complexities of supply chain events to be mapped on the blockchain. Currently, however, no review exists that summarizes the characteristics of blockchain-based tokens and their scope of applications. This paper provides a clear terminological distinction of existing blockchain token types and therefore distinguishes between fungible tokens, non-fungible tokens, smart non-fungible tokens, and dynamic smart non-fungible tokens. Subsequently, the token types are classified regarding their traceability, modifiability, and authorization to evaluate suitability for mapping assets in supply chains. Given the potential of blockchain in supply chain management, the results of the review serve as a foundation for a practical guide supporting the selection process of suitable token types for industrial applications.
Global, competitive markets which are characterised by mass customisation and rapidly changing customer requirements force major changes in production styles and the configuration of manufacturing systems. As a result, factories may need to be regularly adapted and optimised to meet short-term requirements. One way to optimise the production process is the adaptation of the plant layout to the current or expected order situation. To determine whether a layout change is reasonable, a model of the current layout is needed. It is used to perform simulations and in the case of a layout change it serves as a basis for the reconfiguration process. To aid the selection of possible measurement systems, a requirements analysis was done to identify the important parameters for the creation of a digital shadow of a plant layout. Based on these parameters, a method is proposed for defining limit values and specifying exclusion criteria. The paper thus contributes to the development and application of systems that enable an automatic synchronisation of the real layout with the digital layout.
Ein wichtiges Qualifikationsziel von heutigen Wirtschaftsingenieurstudien-programmen ist, Studierende dazu zu befähigen, vernetzt, ganzheitlich, interkulturell und interdisziplinär zu denken und zu handeln. Die Lehr- und Lerninnovation Quest 3C fördert durch ein integratives Blended-Learning Format sowohl die Vermittlung von grundlegendem Fachwissen als auch von berufsqualifizierenden Schlüsselkompetenzen.
Quest 3C : an integrative simulation game used to encourage cross-disciplinary thinking and action
(2014)
Interdisciplinary, complex problem-solving and the necessity to communicate effectively in global Teams characterise today’s rapidly changing Business environment. Employers consistently stress the need for business engineering graduates to demonstrate technical expertise, methodological competences and diverse soft skills. The "silo effect" in higher education has partially created a gap between what industry wants and what academia provides. Here we examine how interdisciplinary team teaching and shared ICT might be more effective in bringing higher education teaching in sync with industry and its demands.
Die Entwicklung neuer Produkte findet nicht nur abteilungs-, sondern zunehmend organisationsübergreifend statt. Kooperationen in der Produktentstehung gewinnen folglich vermehrt an Bedeutung, was neue Anforderungen an den Produktentstehungsprozess (PEP) und die Zusammenarbeit in diesem schafft. Mit diesen Herausforderungen sieht sich auch der Forschungscampus ARENA2036 konfrontiert. Die vorliegende Arbeit beschäftigt sich mit der Entwicklung eines für die interdisziplinäre, interorganisationale Zusammenarbeit geeigneten PEP-Modells. Dieses wird auf Basis von theoretischen Grundlagen, Experteninterviews und unter Berücksichtigung der praktischen Gegebenheiten in ARENA2036 modelliert. Der finale PEP untergliedert sich in einen übergeordneten Prozess, in den die individuellen PEPs der ARENA2036-Partner untergeordnet sind. Durch diese Struktur können die heterogenen PEPs der Partner vereint und die notwendige forscherische Freiheit und Flexibilität gewährleistet werden. Weiterhin wird der PEP durch geeignete Konzepte und Methoden der kooperativen Zusammenarbeit flankiert.
The increase in product variance and shorter product lifecycles result in higher production ramp-up frequencies and promote the usage of mixed-model lines. The ramp-up is considered a critical step in the product life cycle and in the automotive industry phases of the ramp-up are often executed on separated production lines (pilot lines) or factories (pilot plants) to verify processes and to qualify employees without affecting the production of other products in the mixed-model line. The required financial funds for planning and maintaining dedicated pilot lines prevent small and medium-sized enterprises (SMEs) from the application. Hence, SMEs require different tools for piloting and training during the production ramp-up. Learning islands on which employees can be trained through induced and autonomous learning propose a solution. In this work, a concept for the development and application which contains the required organization, activities, and materials is developed through expert interviews. The results of a case study application with a medium-sized automotive manufacturer show that learning islands are a viable tool for employee qualification and process verification during the ramp-up of mixed-model lines.
Digital technologies are moving into physical products. Smart cars, connected lightbulbs and data-generating tennis rackets are examples of previously “pure” physical products that turned into “digitized products”. Digitizing products offers many use cases for consumers that will hopefully persuade them to buy these products. Yet, as revenues from selling digitized products will remain small in the near future, digitized product manufacturers have to look for other sources of benefits. Producer-side use cases describe how manufacturers can benefit internally from the digitized products they produce. Our article identifies three categories of such use cases: product-, service-, and process-related ones.
A shift in attitudes to purchasing departments can be perceived. No longer is the chief goal solely to reduce costs; the procurement function is assuming strategic relevance in the business model, leveraging the supplier as a foundation for innovation. The knowledge accumulated by suppliers is accessed over the journey of long-term partnerships to streamline business practice. Businesses are finding themselves in increasingly competitive environments, and thus need to address inefficiencies in supplier management. “Procurement 4.0” is a concept used in discussing digitalisation in business processes, referring to the process of supplier relationship management and optimisation. This model and its application to supplier relationship management will be the focus of this article. Realising the efficiencies to be obtained in buyer-supplier relationships through “Procurement 4.0” will be explored, primarily through an emphasis on digitalisation of the relationship between the procurement department and supplier.
Einpaarige Verkabelungssysteme gewinnen aufgrund des Internets der Dinge und aufgrund deren Einsatz im Automobil- bzw. Industriebereich zunehmend an Bedeutung. Im Rahmen dieser Arbeit wird gezeigt, wie bei der Übertragung über ein einpaariges Kabel die Bitrate bei gleichbleibender Übertragungsbandbreite durch Nutzung des Phantomkreises erhöht werden kann. Als Übertragungsverfahren kommt jeweils eine 16-stufige Pulsamplitudenmodulation zum Einsatz. Die Ergebnisse werden durch Augendiagramme qualitativ und durch die Messung der Symbolfehler bzw. der Bitfehler quantitativ untersucht.
Milk-run systems are becoming more and more popular when it comes to in-plant material supply. Planning and dimensioning such a system poses challenges, which are difficult to overcome, especially in scenarios characterized by a large number of hard constraints and by well-established processes. This paper is set to ease the task of the planner by presenting an innovative flexible method for the planning and dimensioning of in-plant milk-run systems in high constrained scenarios. After an overview on tugger train systems and existing planning methods, an extensive description of the new method will be given. The new method proposed will be critically analyzed and discussed before suggesting forthcoming research.
Planning of available resources considering ergonomics under deterministic highly variable demand
(2020)
In this paper, a method for hybrid short- to long-term planning of available resources for operations is presented, which is based on a known or deterministically forecasted but highly variable demand. The method considers quantitative measures such as the performance and the availability of resources, ergonomically relevant KPI and ultimately process costs in order to serve as a pragmatic planning tool for operations managers in SMEs. Specifically, the method enables exploiting the ergonomic advantages of available flexible automation technology (e.g. AGVs or picking robots), while assuring that these do not represent a capacity bottleneck. After presenting the method along with the necessary assumptions, mainly concerning the availability of data for the calculations, we report a case study that quantifies the impact of throughput variability on the selection of different process alternatives, where different teams of resources are used.
Online-Portal "MINTFabrik"
(2023)
Das browserbasierte Online-Portal "MINTFabrik" entstand im Zuge der Maßnahmen zur Minderung von Lernrückständen mit der Idee, eine Lücke zu schließen, die es oft bei großen Online-Brückenkursen gibt: Ein Mangel an Übungsaufgaben, die schnell zugänglich sind, einfach ausgesucht werden können und gut auf bestimmte Lehrveranstaltungen und deren Anforderungen zugeschnitten sind. Die Entwicklung erfolgte in einer Kooperation der Hochschule Reutlingen mit der Tübinger Softwarefirma "Let´s Make Sense GmbH". Das Portal verzichtet bewusst auf eine Lektionsstruktur und besteht ausschließlich aus einzelnen Lernbausteinen (Items), d.h. Video-Tutorials, VisuApps und Aufgaben, die über eine komfortable Suche mit Filtern erreichbar sind und direkt bearbeitet werden können. Ein besonderes Merkmal der MINTFabrik sind Mikrokurse, die von Lehrenden und Studierenden erstellt werden können. Das sind kleine Einheiten aus einigen wenigen Items, die beliebig miteinander kombinierbar sind.
The proliferation of smart technologies transforms the way individual consumers perform tasks. Considerable research alludes that smart technologies are often related to domestic energy consumption. However, it remains unclear how such technologies transform tasks and thereby impact our planet. We explore the role of technological smartness in personal day-to-day tasks that help create a more sustainable future. In the absence of theory, but facing extensive changes in everyday life enabled by smart technologies, we draw on phenomenon-based theorizing (PBT) guidelines. As anchor, we refer to task endogeneity related to task-technology fit theory (TTF). As infusion, we employ theory on public goods. Our model proposes novel relations between the concepts of smart autonomy and -transparency with sustainable task outcomes, mediated by task convenience and task significance. We discuss some implications, limitations, and future research opportunities.
This paper addresses what we call the investment question: under what plausible circumstances, if any, can variable renewable energy (VRE, and solar photovoltaic (PV) in particular) be a good investment? Although VRE has been growing rapidly world-wide, it is generally subsidized. Under what cost and market conditions can solar PV flourish without subsidy? We employ solar insolation and market price data from the U.S. and from Germany to gain insight into the investment question. We find that unsubsidized solar PV is or may soon be a justifiable investment, but that market arrangements may play a crucial role in determining success. We end by sketching a proposal that amounts to a reformed capacity market that would afford participation of solar PV.
In this paper we claim that a competitive analysis with new players entering a market requires a specific and systems-based analysis. System dynamics provides such an approach. We infer from our study that established premium automobile manufacturers could have identified a possible threat by a newcomer like Tesla earlier with using system dynamics. In particular, we postulate that a feedback view supports decision makers to better understand the significance of competitive information and perceive information faster and more reliably.
Mit der Überarbeitung der DIN EN 50173 (VDE 0800-173) Serie, wurden unter anderem die optischen Übertragungsstreckenklassen ersatzlos gestrichen. Um die so entstandene Lücke zu schließen, hat das deutsche Gremium DKE GUK 715.3 „Informationstechnische Verkabelung von Gebäudekomplexen“ neue Klassen erarbeitet, die in der DIN VDE 0800- 173-100 „Klassifizierung von Lichtwellenleiter-Übertragungsstrecken“ im Juni 2019 veröffentlicht wurden. Die Norm klassifiziert Lichtwellenleiter Übertragungsstrecken für anwendungsneutrale Kommunikationskabelanlagen nach DIN EN 50173-1.
Sie dient Benutzern, eine breite Palette von Anwendungen zu ermöglichen, die Auswahl des Verkabelungssystems zu erleichtern, eine zukunftssichere Klassifizierung von LWL-Verkabelungen zu generieren und dazu, Systemanforderungen zu beschreiben.
Die in der Norm definierten Klassen beschreiben die Anforderungen an die Übertragungsstrecken und basieren auf einer maximal zulässigen Einfügedämpfung in dB für maximale Übertragungsstreckenlängen, wobei zusätzlich das Bandbreitenlängenprodukt berücksichtigt wird.
Der Beitrag liefert einen Überblick über die Norm und zeigt Anwendungsbeispiele auf.
There are indicators we are entering a new era for MTM research, by moving beyond the structural approach that has characterized MTM research to date, to focus on important and under-researched issues, such as the nature of employees’ experiences in an MTM context. Although team research suggests that the experiences of members impact team functioning, these lines of reasoning have not, until recently, made their way to MTM research. To overcome this limitation, this symposium showcases five papers that use a variety of theoretical perspectives, research designs (i.e., qualitative, quantitative), contexts (e.g., healthcare, automotive manufacturer, online panels), methodologies, and analytical methods (i.e., meta-analysis, content/thematic analysis). The symposium focuses on surfacing and advancing unanswered questions that extend theory and can offer fruitful directions for MTM research by examining critical individual and team level outcomes (e.g., individual/team performance, individual counterproductive and organizational citizenship behavior, individual learning, individual turnover intentions, organizational commitment) in the experiences of MTM employees across their teams (e.g., goals, functions, roles). We hope to provide a forum to advance unanswered questions that offer fruitful directions for MTM research.
The seamless fusion of the virtual world of information with the real physical world of things is considered the key for mastering the increasing complexity of production networks in the context of Industry 4.0. This fusion, widely referred to as the Internet of Things (IoT), is primarily enabled through the use of automatic identification (Auto-ID) technologies as an interface between the two worlds. Existing Auto-ID technologies almost exclusively rely on artificial features or identifiers that are attached to an object for the sole purpose of identification. In fact, using artificial features for the purpose of identification causes additional efforts and is not even always applicable. This paper, therefore, follows an approach of using multiple natural object features defined by the technical product information from computer-aided design (CAD) models for direct identification. By extending optical instance-level 3D-Object recognition by means of additional non-optical sensors, a multi-sensor automatic identification system (AIS) is realised, capable of identifying unpackaged piece goods without the need for artificial identifiers. While the implementation of a prototype confirms the feasibility of the approach, first experiments show improved accuracy and distinctiveness in identification compared to optical instance-level 3D-Object recognition. This paper aims to introduce the concept of multisensor identification and to present the prototype multi-sensor AIS.
Teaching at assembly workstations in production in SMEs (small and medium sized companies) often does not take place at all or only insufficiently. In addition to the lack of technical content, there are also aggravatingly incorrect movement sequences from an ergonomic point of view, which "untrained" people usually automatically acquire. An AI based approach is used to analyze a definite workflow for a specific assembly scope regarding the behavior of several employees. Based on these different behaviors, the AI gives feedback at which points in time, work steps and movement’s particularly dangerous incorrect postures occur. Motion capturing and digital human model simulation in combination with the results of the AI define the optimized workflow. Individual employees can be trained directly due to the fact that AI identifies their most serious incorrect postures and provide them with a direct analogy of their “wrong” posture and “easy on the joints posture”. With the assistance of various test persons, the AI can conduct a study in which the most frequently occurring incorrect postures can be identified. This could be realized in general or tailored to specific groups of people (e.g. "People over 1.90m tall must be particularly careful not to make the following mistake...). The approach will be tested and validated at the Werk150, the factory of the ESB Business School, on the campus of the Reutlingen University. The new gained knowledge will be used subsequently for training in SMEs.
This paper models the political budget cycle with stochastic differential equations. The paper highlights the development of future volatility of the budget cycle. In fact, I confirm the proposition of a less volatile budget cycle in future. Moreover, I show that this trend is even amplified due to higher transparency. These findings are new evidence in the literature on electoral cycles. I calibrate a rigorous stochastic model on public deficit-to-GDP data for several countries from 1970 to 2012.
Changing requirements and qualification profiles of employees, increasingly complex digital systems up to artificial intelligence, missing standards for the seamless embedding of existing resources and unpredictable return on investments are just a few examples of the challenges of an SME in the age of digitalisation. In most cases there is a lack of suitable tools and methods to support companies in the digital transformation process in the value creation processes, but also of training and learning materials. A European research project (BITTMAS - Business Transformation towards Digitalisation and Smart systems, ERASMUS+, 2016-1 DE02-KA202-003437) with international partners from science, associations and industry has addressed this issue and developed various methods and instruments to support SMEs. Within the scope of a literature search, 16 suitable digitalisation concepts for production and logistics were identified. In the following, a learning platform with a literature database with multivariable sorting options according to branches and keywords of digitalisation, a video gallery with basic and advanced knowledge and a glossary were created in order to provide the user with consolidated and structured specialist knowledge. The 16 identifying concepts for transforming value-added processes in the context of digitalisation were transferred to a learning platform using developed learning paths in coaching and training to online course modules including test questions. A maturity model was developed and implemented in a self assessment tool for the analysis to identify the potential of digitalisation in production and logistics in relation to the current technological digitalisation level of the company. As a result, the user receives one or more of the 16 potential digitalisation concepts suggested or the delta for the necessary, not yet available enabler technologies is presented as a spider diagram. For a successful implementation of the identified suitable digitalisation concepts in production and logistics, a further tool was developed to identify supplementary requirements for all company divisions and stakeholders in relation to the "digital transformation" in the form of a self-evaluation. This paper presents the methods and tools developed, the accompanying learning materials and the learning platform.
Smart factories, driven by the integration of automation and digital technologies, have revolutionized industrial production by enhancing efficiency, productivity, and flexibility. However, the optimization and continuous improvement of these complex systems present numerous challenges, especially when real-world data collection is time-consuming, expensive, or limited. In this paper, we propose a novel method for semi-automated improvement of smart factories using synthetic data and cause-effect-relations, while incorporating the aspect of self-organization. The method leverages the power of synthetic data generation techniques to create representative datasets that mimic the behaviour of real-world manufacturing systems. These synthetic datasets serve together with the cause-and-effect relationships as a valuable resource for factory optimization, as they enable extensive experimentation and analysis without the constraints of limited or costly real-world data. Furthermore, the method embraces the concept of self organization within smart factories. By allowing the system to adapt and optimize itself based on feedback from the synthetic data, cause-effect-relationships, the factory can dynamically reconfigure and adjust its processes. To facilitate the improvement process, the method integrates the synthetic data with advanced analytics and machine learning algorithms as well as and the cause-and-effect relationships. This synergy between human expertise and technological advancements represents a compelling path towards a truly optimized smart factory of the future.
In an exploratory study about online communication of large and medium-sized B2B companies from the German state of Baden-Württemberg, their message content communicated via websites, and their websites' appeal for international prospects has been analyzed. It revealed many basic content items absent, making the site less attractive for further exploration, and difficult or international prospects to enter into a dialog, become leads, and possible customers. The subsequent survey elicited organizational backgrounds, available resources, and objectives for online communication. It could trace deficiencies back to a lack of understanding of the importance of digital communication for lead generation, and the customer journey in general, absence of a communication strategy, lack of urgency, and lack of resources to implement desired changes and additions to communication content.
Machine learning (ML) techniques are rapidly evolving, both in academia and practice. However, enterprises show different maturity levels in successfully implementing ML techniques. Thus, we review the state of adoption of ML in enterprises. We find that ML technologies are being increasingly adopted in enterprises, but that small and medium-size enterprises (SME) are struggling with the introduction in comparison to larger enterprises. In order to identify enablers and success factors we conduct a qualitative empirical study with 18 companies in different industries. The results show that especially SME fail to apply ML technologies due to insufficient ML knowhow. However, partners and appropriate tools can compensate this lack of resources. We discuss approaches to bridge the gap for SME.
In this paper, research projects with 30 meter balanced cabling and data rates up to 25 Gbps over one single pair are described. The project aim is to achieve 100 Gbps via a four pair balanced cabling channel. In the following, spectral characteristics of the used prototype twisted pair are presented. Therefore, the insertion loss of the single cable in comparison to the insertion loss of the cable in combination with an equalizing amplifier, as well as the group delay of the cable and the cable connected to the equalizing amplifier is shown. Furthermore, a carrierless Pulse Amplitude Modulation with 32 different levels (PAM-32) as an approach for a possible line encoding is presented. Finally, research measurements of the data transmission with a data rate up to 25 Gbps via shielded twisted pair is shown.
Learning factories on demand
(2021)
Learning Factories are research and learning environments that demonstrate new concepts and technologies for the industry in a practical environment. The interaction between physical and virtual components is a central aspect. The mediation and presentation usually occur directly in the learning factory and are thus limited in time and concerning the user group. A learning factory- on-demand- can be provided by dividing and virtualizing the individual components via containers and microservices. This enables both local operation and operation hybrid cloud or cloud systems. Physical components can be mapped either through standardized interfaces or suitable emulators. Using the example of the Learning Factory at Reutlingen University (Werk150), it will be shown how different use cases can be made available utilizing software-based orchestration, thus promoting broader and more independent teaching.
Powered by e-commerce and vital in the manufacturing industry, intralogistics became an increasingly important and labour-intensive process. In highly standardized automation-friendly environments, such as the automotive sector, most of efficiently automatable intralogistics tasks have already been automated. Due to aging population in EU and ergonomic regulations, the urge to automate intralogistics tasks became consistent also where product and process standardization is lower. That is the case of the production line or cell material supply process, where an increasing number of product variants and individually customized products combined with the necessary ability of reacting to changes in market conditions led to smaller and more frequent replenishment to the points of use in the production plant and to the chaotic addition of production cells in shop floor layout. This led in turn to inevitable traffic growth with unforeseeable related delays and increased level of safety threats and accidents. In this paper, we use the structured approach of the Quality Interaction Function Deployment to analyse the process of supply of assembly lines, seeking the most efficient combination of automation and manual labour, satisfying all stakeholders´ requirements. Results are presented and discussed.
Die Automobilindustrie sieht sich seit Jahren rasant verändernden Markt-, Umwelt- und Wettbewerbsbedingungen ausgesetzt. Der Entwicklungsprozess in der Automobilindustrie wird dadurch zunehmend komplexer. Die Einbeziehung neuer Partner aus anderen Industriebereichen und der Wissenschaft stellt hierbei ein großes Innovationspotential dar, insbesondere Systeminnovationen können hierdurch gefördert werden. Die Herausforderungen solch interdisziplinärer, interorganisationaler Entwicklungsprojekte können nur im geeigneten Umfeld gemeistert werden. In der Literatur als auch in der Industrie lassen sich zahlreiche Kooperationsmodelle identifizieren. Die Eignung dieser Modelle für die interdisziplinäre, interorganisationale Entwicklung in der Automobilindustrie wird anhand geeigneter Kriterien bewertet. Abschließend werden die Ergebnisse der Analyse empirisch überprüft und für den praktischen Fall der ARENA2036 angewendet.
System- und Schnittstellenbeherrschung, Ideen- und Innovationsmanagement sowie die virtuell integrierte Produkt- und Prozessplanung sind zu entwickelnde Kompetenzen, die der veränderten Rolle des Menschen in der Industrie 4.0 Rechnung tragen. Dezidiert adressiert werden können diese in zukunftsweisend ausgerüsteten Lernfabriken.
The dawn of the 21st Century has witnessed a tremendous increase in trade pacts among nations, resulting in renewed hopes for sustainable enterprise development in emerging economies worldwide. Ghana and other sub-Saharan African (SSA) countries have signed onto several North-South and South-South free trade agreements with the hope of strengthening their presence in the international trade arena, and to promote economic growth in SSA. For over two decades, however, very little has changed, and many have dashed their high hopes as enterprises continue to struggle in SSA. Not even the African Continental Free Trade Agreement (AfCFTA) could renew the hopes of sceptics. Several studies opined that enterprises in SSA could improve their domestic and international competitiveness by establishing mutually beneficial partnerships with their counterparts from the Global North and South. This study delved into the issues that affect North-South and South-South business collaborations and recommends key success factors that could help promote mutually beneficial cross-border business partnerships. The research includes both literature and empirical information on the key success factors of business partnerships between African enterprises as well as between African enterprises and firms from the Global North. We approached the study qualitatively using a phenomenological research design. Research participants included important stakeholders in Africa and Europe's international trade and sustainable enterprise development ecosystem. The study identified several challenges with the current business collaborations and recommended new ways of making such partnerships more beneficial.
The use of digital, IT-based components in physical products is becoming increasingly relevant in practice. Surprisingly, the strategic impact of these "digitized products" has not received a lot of attention in IS research so far. Extant papers on the topic rely on ambiguous terminology (e.g., "smart products", "cyber-physical systems", "digital product-service systems") and underlying concepts differ widely. Based on an extensive literature review, this article provides an overview of the different terms and identifies five conceptual elements that form the building blocks of digitized products in research: "hybridity" (i.e., the combination of digital and physical components), connectivity, smartness, digitized product-service bundles (servitization of digitized products), and digitized product ecosystems. The implication for practitioners is that each element comes with different managerial challenges that companies need to address when incorporating the respective element in their products. The research implication is that each conceptual element is supported by different theoretical streams.
Die Wahl einer Klinik ist typischerweise dem stellvertretenden Kaufverhalten zuzuordnen – Kunden suchen vertrauenswürdige, persönliche Quellen zur Unterstützung der Entscheidung. Weiterempfehlungsverhalten kann durch Anreize unterstützt werden – grundlegende Voraussetzung für ehrliche Weiterempfehlung ist jedoch Kundenzufriedenheit. Kundenzufriedenheit entsteht durch den Abgleich zwischen erwarteter und empfundener Leistung – das erwartete Leistungsniveau wird häufig durch Unternehmen anderer Branchen determiniert. Individuen sind nicht in der Lage, die Bestandteile einer Erfahrung isoliert zu bewerten, sondern vermengen sie (Halo-Effekt) - Inkonsistenzen führen zu einer Abwertung der Gesamterfahrung. Darum ist im ersten Schritt die Identifikation der Gesamterfahrung (Kundenreise) erforderlich – diese beginnt vor und endet nach der unmittelbaren Interaktion des Kunden mit dem Unternehmen / der Klinik. Im zweiten Schritt sind die Zufriedenheitstreiber und die Interdependenzen zwischen den Einzelerfahrungen zu ermitteln um dann die Optimierung der Kundenreise zu planen und umzusetzen.
Executive education in IS is under the scrutiny of many institution for the potential to bring in financial revenues. However teaching executives can be a very challenging task because of the previous experiences, variation in their previous education, and multiplicity of motivations for pursuing a continuous education. The panel aims at sharing successful experiences and highlighting challenges of dealing with executive audiences. The panel will present the results of a large survey among executive students and identify the three most significant elements emerged from the survey: the importance of theory that is actionable, the importance of varied pedagogical tools and practices, and the importance of relevance beyond practical tools. Based on a survey that will be distributed to the audience at the beginning of the panel, the audience will be actively engaged in sharing their experiences on the three topics aiming at capitalize and sum up the collective knowledge of the room.
This paper takes a holistic view on an IP-traceability process in interorganizational R&D projects, as a particular Open innovation mode, aiming at showing different technologies which can be used in the front and backend of a traceability process and discussing these technologies in terms of their suitability for data from creativity processes in these projects. To achieve this goal a two-stage literature review on different technologies in the context of traceability was conducted. Then, criteria were derived from the characteristics of data from creativity processes and of interorganizational R&D projects, with which the resulting technologies were discussed. At the end, recommendations regarding suitable technologies for tracing individual creativity artifacts in interorganizational R&D projects were given.
Because of a high product and technology complexity, companies involve external partners in their research and development (R&D) processes. Interorganizational projects result, which represent temporary organizations. In these projects heterogenous organizations work closely together. Since project work is always teamwork, these projects face due to their characteristic’s major challenges on an organizational, relational, and content-related collaboration level. Thus, this paper raises the following research question: “How can a project team be supported on an organizational, relational, and content-related level in an interorganizational new product development setting?” To answer this research question, an explorative expert study was set up with two digital workshops using the interactive presentation tool Mentimeter. The results show that a cooperative innovation culture could support project teams on an organizational and relational level in the future in minimizing predominant problems. Moreover, it supports project teams for example in a functional communication. Furthermore, 18 values of a cooperative innovation culture result which are for example openness and transparency, risk and failure tolerance or respect. On a content-related level the results show that an adaptable tool which promotes creativity and collaboration method as well as content-related input support could be beneficial for problem-solving in an interorganizational new product development setting in the future. Because the tool can guide product developers through the process with suitable creativity and collaboration methods, can give content-related input and can enable interactive interchange on a table-top. Future research could mainly focus on the connection of the cooperative innovation culture and the tool since these potentially influence each other.
The German automotive industry succeeds by technological leadership. Several circumstances like politics of global warming or increased global competition force the whole industry to break new ground for new kinds of collaborative research and development. ARENA2036 represents such a new cooperation form that hosts diverse scientific and industrial partners in one campus in order to research innovative production and light-weight construction topics. The diversity of the partners in ARENA2036 challenges the new product development process (NPDP). In this case study the individual processes of the partners are analysed and a NPDP system is developed. The analysis bases on interviews covering all partners. The NPDP system supports the needs of the interdisciplinary and cross-company partners. It is characterized by a layered structure in order to preserve flexibility for research topics combined with institutionalized parts to manage interfaces. The final NPDP system is evaluated by the partners.
Industry 4.0 predicts that industrial processes, technological infrastructure and all corresponding Business processes, with the help of information and communication technology (ICT), will advance to integrated, ad-hoc interconnected and decentralized Cyber-Physical Production Systems (CPPS) with real-time capabilities of selfoptimization and adaptability. Considering this change, the human being will remain in a dominant role, because it is not expected that the human factor with its characteristics and capabilities will be substituted entirely by autonomously acting technology in the foreseeable future. The mechanical intelligence, for instance, is limited to the selection of predefined options, while human creativity, flexibility, the ability to learn and to improve are required to design and configure systems, processes and products. Humans have the expertise and experience to analyze, assess and solve - even in exceptional situations. However, the amount of purely manual tasks for shop floor workers will decrease. Their role will change from a manually executing to a proactive preconceiving worker with increased responsibility. Due to the growing degree of digitalization and interconnectedness, also the tasks and responsibilities for planning and design personnel will continuously expand and become more complex. The work in versatile ad-hoc networks with advanced ICT-Tools and assistance systems will lead to increased requirements regarding the knowledge, capability and capacity of the respective employees. The on-going pervasion of IT and emergence of systems with unprecedented complexity specifically require significantly improved capabilities in analysis, abstraction, problem solving and decision making from future labour. Accordingly, the industry is asking for graduates that are educated interdisciplinary and practice-oriented. Some universities already meet these expectations, using learning factories for realistic, action-oriented classes and trainings. Lecturers are confronted with the challenge to identify future job profiles and correlated qualification requirements, especially regarding the conceptualization and implementation of CPPS, and to adapt and enhance their education concepts and methods adequately and consequently. For the new, virtual world of manufacturing a proper understanding of engineering as well as Computer sciences is essential. Industry 4.0 implies this interdisciplinary split. Integrated competencies for product and process planning and design, methodological competencies for systematical idea and innovation management as well as a holistic system and Interface competence will be crucial to achieve interconnection of physical and digital processes and machines. The Vienna University of Technology and the ESB Reutlingen committed to integrate key aspects of Industry 4.0 into their respective learning factories successively. Thus, the students will act as the coordinators of the CPPS and thereby remain in the center of all learning and implementation activities.
The market for indoor positioning systems for a variety of applications has grown strongly in recent years. A wide range of systems is available, varying considerably in terms of accuracy, price and technology used. The suitability of the systems is highly dependent on the intended application. This paper presents a concept to use a single low-cost PTZ camera in combination with fiducial markers for indoor position and orientation determination. The intended use case is to capture a plant layout consisting of position, orientation and unique identity of individual facilities. Important factors to consider for the selection of a camera have been identified and the transformation of the marker pose in camera coordinates into a selectable plant coordinate system is described. The concept is illustrated by an exemplary practical implementation and its results.
Increasingly volatile market conditions and manufacturing environments combined with a rising demand for highly personalized products, the emergence of new technologies like cyber-physical systems and additive manufacturing as well as an increasing cross-linking of different entities (Industrie 4.0) will result in fundamental changes of future work and logistics systems. The place of production, the logistical network and the respective production system will underlie the requirements of constant changes and therefore sources and sinks of logistical networks have to obey the versatility of (cyber-physical) production systems. To cope with the arising complexity to control and monitor changeable production and logistics systems, decentralized control systems are the mean of choice since centralized systems are pushed to their limits in this regard. This paradigm shift will affect the overall concept under which production and logistics is planned, managed and controlled and how companies interact and collaborate within the emerging value chains by using dynamic methods to generate and execute the created network and to allocate available resources to fulfill the demand for customized products. In this field of research learning factories, like the ESB Logistics Learning Factory at ESB Business School (Reutlingen University), provide a great potential as a risk free test bed to develop new methods and technical solutions, to investigate new technologies regarding their practical use and to transfer the latest state of knowledge and specific competences into the training of students and professionals. Keeping with these guiding principles ESB Business School is transferring its existing production system into a cyber-physical production system to investigate innovative solutions for the design of human-machine collaboration and technical assistance systems as wells as to develop decentralized control methods for intralogistics systems following the requirements of changeable work systems including the respective design of dynamic inbound and outbound logistic networks.
Rising consumption due to a growing world population and increasing prosperity, combined with a linear economic system have led to a sharp increase in garbage collection, general pollution of the environment and the threat of resource scarcity. At the same time, the perception of environmental protection becomes more sensitive as the consequences of neglecting sustainable business and eco-efficiency become more visible. The Circular Economy (CE) could reduce waste production and is able to decouple economic growth from resource consumption, but most of the products currently in use are not designed for the reuse-forms of the CE. In addition, the decision-making process of the End of-Usage (EoU) products regarding the following steps has further weaknesses in terms of economic attractiveness for the participants, which leads to low return rates and thus the disposal is often the only alternative.
This paper proposes a model of the decision-making process, which uses machine learning. For this purpose, a Machine Learning (ML) classification is created, by applying the waterfall model. An artificial neural network (ANN) uses information about the model, use phase and the obvious symptoms of the product to predict the condition of individual components. The resulting information can be used in a downstream economic and ecological evaluation to assess the possible next steps. To test this process comprehensive training data is simulated to train the ANN. The decentralized implementation, cost savings and the possibility of an incentive system for the return of an end-of-usage product could lead to increased return rates. Since electronic devices in particular are attractive for the CE, laptops are the reference object of this work. However, the obtained findings are easily applicable to other electronic devices.
The imparting of knowledge and skills in STEM education, especially under the influence of the Covid-19 pandemic, is increasingly taking place online and through digital formats. The partially asynchronous instruction eliminates, on the one hand, the social relation in the learning process and, on the other hand, the direct experience with physical objects. Here, the digital learning systems provide learning tools and controls to support the learning process on a general basis. Existing methods for simulating physical objects (digital twins) are also used to a minimal extent. The following approach presents a learning system framework that enables individualized learning, including all dimensions (social, physical). Implementing a concept that uses a personalized assistance system to orchestrate the individual learning steps enables efficient and effective learning. Applying the learning system framework exemplifies the STEM education at Reutlingen University in the logistics learning factory Werk150.
In a recently developed study programme at Reutlingen University, which focuses on practical orientations, an innovative product with solid company references is to be defined and realised by student teams. On the basis of this product, all subjects of the business engineering study programme “Sustainable Production and Business” are taught. By focusing on three main paths of future skills that have been developed by NextSkills to analyse upcoming social changes, global challenges and fields of work that are innovation-driven and agile, the new study programme aims to create responsible leaders who will shape global businesses respectfully. Thereby, different TRIZ tools help to support students in developing their own products with a focus on sustainability and pay off on the future skills enhancement. Further, students get to know TRIZ tools in an unbiased way, unburdened by too much theory, and are thus continuously supported in the progressing product development process that accompanies their studies. Hence, students perceive TRIZ on the one hand as a method to develop sustainable products and, on the other hand, to find sustainable solutions for everyday problems. The knowledge and positive experiences gained in this way should then arouse curiosity for the TRIZ class at the end of the study programme. The students can graduate with a TRIZ Level 1 certificate. Thereby, as many students as possible are introduced to the TRIZ methods, and the TRIZ tool is spread widely.
Gamification, the use of game elements for non-gaming purposes, may just make a huge impact on education, a contribution the world in general and South Africa in particular, desperately needs. In today’s fast-paced work environment, there is not only a severe skills shortage, but also a great need for graduates with practical knowledge - students that are not purely “book smart”. Didactic teaching habits have created an education realm in which reciting facts is more often than not what gets students to pass. Learning factories are physical, operational factories that serve as exemplary and realistic hands-on learning environments and provide an important step towards more industry-prepared graduates. Top universities around the world are establishing such environments and are showing superb results. This paper explores the potential benefit of applying gamification in such a setting to enhance the learning environment even further, and provide opportunities for training otherwise difficult to teach topics, such as shop floor management.
Im Februar 2011 wurden die Autoren von der Metropolitan School Frankfurt eingeladen, in einer vierstündigen Unterrichtseinheit die Grundlagen von systemischem Denken und System Dynamics einer vierten Klasse mit Kindern im Alter von 9 und 10 Jahren zu vermitteln. Inhaltlicher Themenschwerpunkt sollten Ökosysteme sein, die im Curriculum eine mehrwöchige Fokuslehreinheit bilden. Als Ergebnis eines Austauschs mit dem Klassenlehrer wurde der Fokus auf zwei Handlungsstränge gelegt: Räuber-Beute-Systeme sind für Viertklässler inhaltlich interessant und fügen sich passsend in die Unterrichtseinheit der Jahrgangstufe ein. Als weiteres, komplexeres Themengebiet wurd der Klimawandel gewählt. Beide Themen haben den gewünschten inhaltlichen Bezug zum Schwerpunkt "Ökosysteme".
Started as a mono-line focused purely on savings, in late 2012 ING Direct Spain was becoming a full-service bank. To this end, the bank had substantially increased its product- and channel-portfolio. ING Direct Spain originally provided "simple", "good value for money" products in an "easy to deal with" way at low cost supported by a direct model. But with the growth in its product portfolio during the previous decade and the ambitious goal of becoming a full-service bank, an increase in complexity seemed inevitable. Like many businesses in the global, digital economy, ING Direct Spain found it needed to decide which complexity created value for its customers and which one not. It also learned that IT can contribute to complexity and/or help manage complexity.
This case offers a close look at challenges of growing a company by increasing product complexity to provide comprehensive yet simple services.
Framework for integrating intelligent product structures into a flexible manufacturing system
(2023)
Increasing individualisation of products with a high variety and shorter product lifecycles result in smaller lot sizes, increasing order numbers, and rising data and information processing for manufacturing companies. To cope with these trends, integrated management of the products and manufacturing information is necessary through a “product-driven” manufacturing system. Intelligent products that are integrated as an active element within the controlling and planning of the manufacturing process can represent flexibility advantages for the system. However, there are still challenges regarding system integration and evaluation of product intel-ligence structures. In light of these trends, this paper proposes a conceptual frame-work for defining, analysing, and evaluating intelligent products using the example of an assembly system. This paper begins with a classification of the existing problems in the assembly and a definition of the intelligence level. In contrast to previous approaches, the analysis of products is expanded to five dimensions. Based on this, a structured evaluation method for a use case is presented. The structure of solving the assembly problem is provided by the use case-specific ontology model. Results are presented in terms of an assignment of different application areas, linking the problem with the target intelligence class and, depending on the intelligence class of the product, suggesting requirements for implementation. The conceptual frame-work is evaluated by utilising a case study in a learning factory. Here, the model-mix assembly is controlled actively by the workpiece carrier in terms of transferring the variant-specific work instructions to the operator and the collaborative robot (cobot) at the workstations. The resulting system thus enables better exploitation of the poten-tials through less frequent errors and shorter search times. Such an implementation has demonstrated that the intelligent workpiece carrier represents an additional part for realising a cyber-physical production system (CPPS).
Latest advancements in new technologies have made it possible to fully automate the in-plant material flow of small load carriers between the warehouse and the production or assembly line. However, none of methods available in literature fully addresses the planning and dimensioning problem of a logistic system based on these new autonomous technologies. This paper is set to present a method to estimate the fleet size of the new logistic system. After an overview on the state of the art, the method based on combinatorics and probability theory will be explained. A short discussion and suggestions for forthcoming research will conclude the paper.
The fifth mobile communications generation (5G) can lead to a substantial change in companies enabling the full capability of wireless industrial communication. 5G with its key features of providing Enhanced Mobile Broadband, Ultra-Reliable and Low-Latency Communication, and Massive Machine Type Communication will support the implementation of Industry 4.0 applications. In particular, the possibility to set-up Non-Public Networks provides the opportunity of 5G communication in factories and ensures sole access to the 5G infrastructure offering new opportunities for companies to implement innovative mobile applications. Currently there exist various concepts, ideas, and projects for 5G applications in an industrial environment. However, the global rollout of 5G systems is a continuous process based on various stages defined by the global initiative 3rd Generation Partnership Project that develops and specifies the 5G telecommunication standard. Accordingly, some services are currently still far from their final performance capability or not yet implemented. Additionally, research lacks in clarifying the general suitability of 5G regarding frequently mentioned 5G use cases. This paper aims to identify relevant 5G use cases for intralogistics and evaluates their technical requirements regarding their practical feasibility throughout the upcoming 5G specifications.
The paper focuses on a recently introduced paradigm for the logistic process of picking, with respect to the man-to-goods and goods-to-man concept: the robot to-goods. First the task and system architecture of the fast deployable autonomous commissioning system are described, then the economic efficiency of the system is analysed in a real business case scenario using a simplified method, which is explained and discussed. The clearly positive net present value of the investment and the short payback period obtained in the business case prove how the robot-to-goods paradigm for the commissioning process, implemented through the automation of the forklift platform, is economically attractive for small and medium size enterprises.
In times of climate change and growing urbanization, the way food is produced and consumed also changes. Meanwhile, digitization is transforming farming practices, which also applies to the domestic growing of crops. More and more so-called smart home farms (SHF) are finding their way into private households. This paper conceptualizes the unique nature of enabled smart services and their underlying technology. Following an inductive interpretive approach, this study explores the antecedents of smart home farming practices. Our sample consists of eleven actual smart home farmers. We found six constructs to be of salient importance: expected outcomes related to harvesting, positive feelings, and sustainability; a combination of one's affinity for green and novel technologies; and the smartness and visibility of the enabled services. In the outlook, we present some preliminary thoughts for testing our qualitative findings.
Increasing flexibility, greater transparency and faster adaptability play a key role in the development of future intralogistics. Ever-changing environmental conditions require easy extensibility and modifiability of existing bin systems. This research project explores approaches to transfer the Internet of Things (IoT) paradigm to intralogistics. This allows a synchronization of the material and information flow. The bin is enabled by the implementation of adequate hardware and software components to capture, store, process and forward data to selected system subscribers. Monitoring the processes in the intralogistics by means of the smart bin system ensures the implementation of appropriate actions in case of defined deviations. By using explorative expert interviews with representatives from the automotive and pharmaceutical industries, seven practical application scenarios were defined. On this basis, the requirements of smart bin systems were examined. For each individual case of application, a system model was created in order to obtain an overview of the system components and thus reveal similarities and differences. Based on the similarities of the system models, a general requirement profile was derived. After the hardware components of the bin system had been determined, a utility analysis was carried out to find the adequate IoT software. The utility analysis was conducted with a focus on data acquisition and data transfer, data storage, data analysis, data presentation as well as authorization management and data security. The results show that there is great interest in easily expandable and modifiable bin systems, as in all cases, the necessary information flow in the existing bin system has to be improved by means of new IoT hardware and software components.
Evaluation of human-robot order picking systems considering the evolution of object detection
(2022)
The automation of intralogistic processes is a major trend, but order picking, one of the core and most cost-intensive tasks in this field, remains mostly manual due to the flexibility required during picking. Reacting to its hard physical and ergonomic strain, the automation of this process is however highly relevant. Robotic picking system would enable the automation of this process from a technical point of view, but the necessity for the system to evolve in time, due to dynamics of logistic environments, faces operations with new challenges that are hardly treated in literature. This unknown scares potential investors, hindering the application of technically feasible solutions. In this paper, a model for the evaluation of the additional cost of training of automated systems during operations is presented, that also considers the savings enabled by the system after its evolution. The proposed approach, that considers different parameters such as capacity, ergonomics and cost, is validated with a case study and discussed.
According to a recent survey the great majority of players in logistics are planning to adopt one or more robotic solutions until 2019. Technical solutions for automation of processes in logistics are often available as a market-ready product, but the lack of standardization and skepticism towards long term investments are often the reasons why these solutions are not implemented on a large scale. This paper is set to bridge the gap between the world of technologies and the one of applications in order to help investors, robot producers and system integrators to decide on which branch of logistics to set their focus. The three main branches Courier Express Parcel (CEP), contract logistics and production logistics are briefly defined and distinguished through their characteristic factors and parameters. Then a method based on the analysis of three parameters (operative costs, required performance and flexibility) in the three branches is set to identify the most convenient branch of logistics for investing in new technologies, namely the one in which the risk of investment is lower, the return is higher and faster. The conclusion of the method shows that higher labor costs, strict regulations and higher standardization make the production logistics the most suitable branch for investments in emerging automation solutions.
It has been recognized that to increase the competetitiveness of international higher education institutions in the global education market, their international graduates' employability must be enhanced. The present paper investigates, from the employers' perspective, the possibilities of international graduates with domestic degrees in Russia and Germany to find jobs in the Russian and German labor market. It uses qualitative open-ended interviews at 12 companies in St. Petersburg, Russia and Germany, which are engaged with International Business activities. The investigation concentrates on the employment opportunities and barriers of international graduates from an individual, organizational and an institutional perspective.
The research highlighted the main differences and similarities in the perception of the HR managers in both countries. In the German labor market, companies have a high demand for international graduates, especially those operating internationally, highly demand international graduates, emphasizing the existence of international trainee programs and the need to reflect the diversity of their business in the diversity of their staff. In contrast, Russian companies showed a positive predisposition for international graduates but no demand. Domestic firms focus their efforts on expatriate programs and/or highly-qualified specialists rather than trainee programs to hire internationals. On the other hand, insitutional barriers exist, as well as a lack of support with regards to regulations and requirements for entering both Russian and German markets. The national language requirement was stressed as the major barrier towards hiring internationals in both countries. The investigation from an organizational point of view revealed that interviewers showed a positive predisposition towards international graduates in both countries, focusing on the graduate's skill set rather than their nationality. This research explores the opportunities and barriers and discusses the implications for students and universities.
Electronic word-of-mouth (eWoM) communication plays an increasingly important role in modern business. The underlying concept of word-of-mouth (WoM) communication is well researched and has proved highly significant in respect of its impact on customers purchase behavior. However, due to the advent of digital technologies, decision-making among customers is progressively shifting to the online world. Consequently, eWoM has received a lot of attention from the academic community. As multiple research papers focus on specific facets of eWoM, there is a need to integrate current research results systematically. Thus, this paper presents a scientific literature analysis in order to determine the current state-of-the-art in the field of eWoM. Five main research areas were analyzed, supporting the need for further eWoM studies and providing a structured overview of existing results.
Es wird gezeigt, wie bei Fernspeisung die Vorhersage der Erwärmung mit entsprechender Modellierung verbessert werden kann und wie der Einfluss von Material und Form des Kabelkanals die Erwärmung und das das Temperaturprofil des Bündels beeinflusst. Es wird auch vorgestellt, dass die erhöhte Erwärmung von Metallkabelkanälen auf die geringere Emissivität zurückzuführen ist und wie das verbessert werden kann.
Die zunehmende Technologie- und Produktkomplexität führen dazu, dass sich immer mehr Unternehmen für ihre F&E mit externen Organisationen vernetzen. So entstehen interorganisationale F&E-Projekte, welche temporäre Organisationen darstellen. Forschungsfragen zu diesen Projekten sind u.a. hinsichtlich der Praktiken und Verhaltensregeln offen. Über ein kulturbewusstes Projektmanagement können kooperations- und innovationsförderliche Praktiken und Verhaltensregeln aufgebaut werden, die für diese F&E-Projekte essenziell sind. So ist die Forschungsfrage dieses Beitrags, wie ein projektkulturbewusstes Management interorganisationaler F&E-Projekte erfolgen kann. Dafür wird auf Basis der theoretischen Grundlagen zum F&E-Projektmanagement, zu menschlichen Handlungssystemen und Ebenen der Zusammenarbeit, zu Kultur und Verhalten ein projektkulturbewusstes Management-Modell entwickelt. Das Modell umfasst zwei Teile. Im ersten Teil wird der Bereich aufgezeigt, in welchem sich die Projektkultur entwickelt. Im zweiten Teil wird aufgezeigt, wie die Faktoren für ein wahrscheinlich kooperatives und innovatives Verhalten innerhalb dieses Bereiches gestaltet werden sollten.
Efficiency in supply chain risk management (SCRM) is a major topic in industries with serial production and a complex supply chain due to limited management and financial resources. A high number of possible risk situations and intertwined processes create a more challenging environment for resource allocation. Managers cannot perform SCRM in all possible supply chain areas and hence have to decide where available resources should be utilised for highest possible risk reduction. This makes it important to quickly and systematically evaluate input and output relationships among risk mitigation actions to determine which actions are deployed first for efficient risk level reduction. This paper introduces a new SCRM method based on the failure mode and effects analysis (FMEA) in order to perform an efficiency-oriented risk action prioritisation. By considering the cost-benefit evaluation of identified risk mitigation actions for each assessed risk and by determining the implementation effort for risk mitigation actions, also considered as the cost for realising a specific risk action the method allows finding those risk and risk mitigation actions, which are most efficient for risk reduction and should be implemented first in the process of risk steering.
In its 100+ years of company history, IBM reinvented itself multiple times. In the last 20 years, IBM had shifted from individual products to integrated solutions and moved to become a globally integrated enterprise with standardized processes. In 2014, the expanding adoption of social, mobile, analytics, and cloud (SMAC) technologies generated excitement in the industry. IBM believed these technologies presented a huge growth opportunity. Simultaneously, management viewed SMAC technologies as disruptive forces demanding transformative changes to how IBM worked. And introducing new ways of working to 400,000 employees in 175 countries was a daunting task.
Based on personal interviews with 17 IBM business and IT executives, the case illustrates organizational challenges of introducing current technologies that even providers of these technologies face – in other words, when they “eat their own cooking.” It demonstrates the difficulties large companies face when implementing technologies that students use daily and take for granted.
Early exposure makes the entrepreneur: how economics education in school influences entrepreneurship
(2022)
Many countries that seek to boost their economy share the goal of promoting entrepreneurship. Whereas there is ample research on the predictors of entrepreneurship during adulthood, we know little about how pre-adulthood experience influences entrepreneurship later in life. Using a natural experiment, this paper examines whether introducing economics classes in school enhances entrepreneurial behavior in adulthood. Our difference-in-differences approach exploits curricula reforms across German states that introduced compulsory economics education classes in secondary schools. Using information on school and labor market careers for more than 10,000 individuals from 1984 to 2019, we find that the reform increases students’ entrepreneurial activities by three percentage points. Examining gender differences, we find that economics classes equally benefit female and male students. Our results advance our understanding of how pre-adulthood experiences shape individuals’ entrepreneurial behavior.
Reacting to ever-changing business environments, in the last decade complex systems of systems accomplished giant leaps forward leading to great technological flexibility. However, this dimension of flexibility is often limited by the rigidity of super-ordinated planning systems. Especially when hybrid teams of automated and human resources are in place, the dynamic assignment of tasks taking into account ergonomics remains a challenge. After exposing a gap in the state of the art on the topic, this paper presents an approach to include ergonomics in dynamic resource allocation models. Combining and complementing existing approaches, the presented method monitors the actual ergonomic burden of the resources during a shift and it provides a linear optimization model to steer the resource allocation process.