Refine
Document Type
- Conference proceeding (163) (remove)
Is part of the Bibliography
- yes (163) (remove)
Institute
- ESB Business School (163) (remove)
Publisher
- Association for Information Systems (18)
- IEEE (18)
- Springer (17)
- Elsevier (16)
- Stellenbosch University (10)
- Curran Associates Inc. (5)
- Leibniz-Universität Hannover (5)
- Gesellschaft für Informatik e.V (4)
- Verlag IFZ – Hochschule Luzern (4)
- Academy of Management (3)
In this paper we claim that a competitive analysis with new players entering a market requires a specific and systems-based analysis. System dynamics provides such an approach. We infer from our study that established premium automobile manufacturers could have identified a possible threat by a newcomer like Tesla earlier with using system dynamics. In particular, we postulate that a feedback view supports decision makers to better understand the significance of competitive information and perceive information faster and more reliably.
Mit der Überarbeitung der DIN EN 50173 (VDE 0800-173) Serie, wurden unter anderem die optischen Übertragungsstreckenklassen ersatzlos gestrichen. Um die so entstandene Lücke zu schließen, hat das deutsche Gremium DKE GUK 715.3 „Informationstechnische Verkabelung von Gebäudekomplexen“ neue Klassen erarbeitet, die in der DIN VDE 0800- 173-100 „Klassifizierung von Lichtwellenleiter-Übertragungsstrecken“ im Juni 2019 veröffentlicht wurden. Die Norm klassifiziert Lichtwellenleiter Übertragungsstrecken für anwendungsneutrale Kommunikationskabelanlagen nach DIN EN 50173-1.
Sie dient Benutzern, eine breite Palette von Anwendungen zu ermöglichen, die Auswahl des Verkabelungssystems zu erleichtern, eine zukunftssichere Klassifizierung von LWL-Verkabelungen zu generieren und dazu, Systemanforderungen zu beschreiben.
Die in der Norm definierten Klassen beschreiben die Anforderungen an die Übertragungsstrecken und basieren auf einer maximal zulässigen Einfügedämpfung in dB für maximale Übertragungsstreckenlängen, wobei zusätzlich das Bandbreitenlängenprodukt berücksichtigt wird.
Der Beitrag liefert einen Überblick über die Norm und zeigt Anwendungsbeispiele auf.
There are indicators we are entering a new era for MTM research, by moving beyond the structural approach that has characterized MTM research to date, to focus on important and under-researched issues, such as the nature of employees’ experiences in an MTM context. Although team research suggests that the experiences of members impact team functioning, these lines of reasoning have not, until recently, made their way to MTM research. To overcome this limitation, this symposium showcases five papers that use a variety of theoretical perspectives, research designs (i.e., qualitative, quantitative), contexts (e.g., healthcare, automotive manufacturer, online panels), methodologies, and analytical methods (i.e., meta-analysis, content/thematic analysis). The symposium focuses on surfacing and advancing unanswered questions that extend theory and can offer fruitful directions for MTM research by examining critical individual and team level outcomes (e.g., individual/team performance, individual counterproductive and organizational citizenship behavior, individual learning, individual turnover intentions, organizational commitment) in the experiences of MTM employees across their teams (e.g., goals, functions, roles). We hope to provide a forum to advance unanswered questions that offer fruitful directions for MTM research.
The seamless fusion of the virtual world of information with the real physical world of things is considered the key for mastering the increasing complexity of production networks in the context of Industry 4.0. This fusion, widely referred to as the Internet of Things (IoT), is primarily enabled through the use of automatic identification (Auto-ID) technologies as an interface between the two worlds. Existing Auto-ID technologies almost exclusively rely on artificial features or identifiers that are attached to an object for the sole purpose of identification. In fact, using artificial features for the purpose of identification causes additional efforts and is not even always applicable. This paper, therefore, follows an approach of using multiple natural object features defined by the technical product information from computer-aided design (CAD) models for direct identification. By extending optical instance-level 3D-Object recognition by means of additional non-optical sensors, a multi-sensor automatic identification system (AIS) is realised, capable of identifying unpackaged piece goods without the need for artificial identifiers. While the implementation of a prototype confirms the feasibility of the approach, first experiments show improved accuracy and distinctiveness in identification compared to optical instance-level 3D-Object recognition. This paper aims to introduce the concept of multisensor identification and to present the prototype multi-sensor AIS.
Teaching at assembly workstations in production in SMEs (small and medium sized companies) often does not take place at all or only insufficiently. In addition to the lack of technical content, there are also aggravatingly incorrect movement sequences from an ergonomic point of view, which "untrained" people usually automatically acquire. An AI based approach is used to analyze a definite workflow for a specific assembly scope regarding the behavior of several employees. Based on these different behaviors, the AI gives feedback at which points in time, work steps and movement’s particularly dangerous incorrect postures occur. Motion capturing and digital human model simulation in combination with the results of the AI define the optimized workflow. Individual employees can be trained directly due to the fact that AI identifies their most serious incorrect postures and provide them with a direct analogy of their “wrong” posture and “easy on the joints posture”. With the assistance of various test persons, the AI can conduct a study in which the most frequently occurring incorrect postures can be identified. This could be realized in general or tailored to specific groups of people (e.g. "People over 1.90m tall must be particularly careful not to make the following mistake...). The approach will be tested and validated at the Werk150, the factory of the ESB Business School, on the campus of the Reutlingen University. The new gained knowledge will be used subsequently for training in SMEs.
This paper models the political budget cycle with stochastic differential equations. The paper highlights the development of future volatility of the budget cycle. In fact, I confirm the proposition of a less volatile budget cycle in future. Moreover, I show that this trend is even amplified due to higher transparency. These findings are new evidence in the literature on electoral cycles. I calibrate a rigorous stochastic model on public deficit-to-GDP data for several countries from 1970 to 2012.
Changing requirements and qualification profiles of employees, increasingly complex digital systems up to artificial intelligence, missing standards for the seamless embedding of existing resources and unpredictable return on investments are just a few examples of the challenges of an SME in the age of digitalisation. In most cases there is a lack of suitable tools and methods to support companies in the digital transformation process in the value creation processes, but also of training and learning materials. A European research project (BITTMAS - Business Transformation towards Digitalisation and Smart systems, ERASMUS+, 2016-1 DE02-KA202-003437) with international partners from science, associations and industry has addressed this issue and developed various methods and instruments to support SMEs. Within the scope of a literature search, 16 suitable digitalisation concepts for production and logistics were identified. In the following, a learning platform with a literature database with multivariable sorting options according to branches and keywords of digitalisation, a video gallery with basic and advanced knowledge and a glossary were created in order to provide the user with consolidated and structured specialist knowledge. The 16 identifying concepts for transforming value-added processes in the context of digitalisation were transferred to a learning platform using developed learning paths in coaching and training to online course modules including test questions. A maturity model was developed and implemented in a self assessment tool for the analysis to identify the potential of digitalisation in production and logistics in relation to the current technological digitalisation level of the company. As a result, the user receives one or more of the 16 potential digitalisation concepts suggested or the delta for the necessary, not yet available enabler technologies is presented as a spider diagram. For a successful implementation of the identified suitable digitalisation concepts in production and logistics, a further tool was developed to identify supplementary requirements for all company divisions and stakeholders in relation to the "digital transformation" in the form of a self-evaluation. This paper presents the methods and tools developed, the accompanying learning materials and the learning platform.
Smart factories, driven by the integration of automation and digital technologies, have revolutionized industrial production by enhancing efficiency, productivity, and flexibility. However, the optimization and continuous improvement of these complex systems present numerous challenges, especially when real-world data collection is time-consuming, expensive, or limited. In this paper, we propose a novel method for semi-automated improvement of smart factories using synthetic data and cause-effect-relations, while incorporating the aspect of self-organization. The method leverages the power of synthetic data generation techniques to create representative datasets that mimic the behaviour of real-world manufacturing systems. These synthetic datasets serve together with the cause-and-effect relationships as a valuable resource for factory optimization, as they enable extensive experimentation and analysis without the constraints of limited or costly real-world data. Furthermore, the method embraces the concept of self organization within smart factories. By allowing the system to adapt and optimize itself based on feedback from the synthetic data, cause-effect-relationships, the factory can dynamically reconfigure and adjust its processes. To facilitate the improvement process, the method integrates the synthetic data with advanced analytics and machine learning algorithms as well as and the cause-and-effect relationships. This synergy between human expertise and technological advancements represents a compelling path towards a truly optimized smart factory of the future.
In an exploratory study about online communication of large and medium-sized B2B companies from the German state of Baden-Württemberg, their message content communicated via websites, and their websites' appeal for international prospects has been analyzed. It revealed many basic content items absent, making the site less attractive for further exploration, and difficult or international prospects to enter into a dialog, become leads, and possible customers. The subsequent survey elicited organizational backgrounds, available resources, and objectives for online communication. It could trace deficiencies back to a lack of understanding of the importance of digital communication for lead generation, and the customer journey in general, absence of a communication strategy, lack of urgency, and lack of resources to implement desired changes and additions to communication content.
Machine learning (ML) techniques are rapidly evolving, both in academia and practice. However, enterprises show different maturity levels in successfully implementing ML techniques. Thus, we review the state of adoption of ML in enterprises. We find that ML technologies are being increasingly adopted in enterprises, but that small and medium-size enterprises (SME) are struggling with the introduction in comparison to larger enterprises. In order to identify enablers and success factors we conduct a qualitative empirical study with 18 companies in different industries. The results show that especially SME fail to apply ML technologies due to insufficient ML knowhow. However, partners and appropriate tools can compensate this lack of resources. We discuss approaches to bridge the gap for SME.
In this paper, research projects with 30 meter balanced cabling and data rates up to 25 Gbps over one single pair are described. The project aim is to achieve 100 Gbps via a four pair balanced cabling channel. In the following, spectral characteristics of the used prototype twisted pair are presented. Therefore, the insertion loss of the single cable in comparison to the insertion loss of the cable in combination with an equalizing amplifier, as well as the group delay of the cable and the cable connected to the equalizing amplifier is shown. Furthermore, a carrierless Pulse Amplitude Modulation with 32 different levels (PAM-32) as an approach for a possible line encoding is presented. Finally, research measurements of the data transmission with a data rate up to 25 Gbps via shielded twisted pair is shown.
Learning factories on demand
(2021)
Learning Factories are research and learning environments that demonstrate new concepts and technologies for the industry in a practical environment. The interaction between physical and virtual components is a central aspect. The mediation and presentation usually occur directly in the learning factory and are thus limited in time and concerning the user group. A learning factory- on-demand- can be provided by dividing and virtualizing the individual components via containers and microservices. This enables both local operation and operation hybrid cloud or cloud systems. Physical components can be mapped either through standardized interfaces or suitable emulators. Using the example of the Learning Factory at Reutlingen University (Werk150), it will be shown how different use cases can be made available utilizing software-based orchestration, thus promoting broader and more independent teaching.
Powered by e-commerce and vital in the manufacturing industry, intralogistics became an increasingly important and labour-intensive process. In highly standardized automation-friendly environments, such as the automotive sector, most of efficiently automatable intralogistics tasks have already been automated. Due to aging population in EU and ergonomic regulations, the urge to automate intralogistics tasks became consistent also where product and process standardization is lower. That is the case of the production line or cell material supply process, where an increasing number of product variants and individually customized products combined with the necessary ability of reacting to changes in market conditions led to smaller and more frequent replenishment to the points of use in the production plant and to the chaotic addition of production cells in shop floor layout. This led in turn to inevitable traffic growth with unforeseeable related delays and increased level of safety threats and accidents. In this paper, we use the structured approach of the Quality Interaction Function Deployment to analyse the process of supply of assembly lines, seeking the most efficient combination of automation and manual labour, satisfying all stakeholders´ requirements. Results are presented and discussed.
Die Automobilindustrie sieht sich seit Jahren rasant verändernden Markt-, Umwelt- und Wettbewerbsbedingungen ausgesetzt. Der Entwicklungsprozess in der Automobilindustrie wird dadurch zunehmend komplexer. Die Einbeziehung neuer Partner aus anderen Industriebereichen und der Wissenschaft stellt hierbei ein großes Innovationspotential dar, insbesondere Systeminnovationen können hierdurch gefördert werden. Die Herausforderungen solch interdisziplinärer, interorganisationaler Entwicklungsprojekte können nur im geeigneten Umfeld gemeistert werden. In der Literatur als auch in der Industrie lassen sich zahlreiche Kooperationsmodelle identifizieren. Die Eignung dieser Modelle für die interdisziplinäre, interorganisationale Entwicklung in der Automobilindustrie wird anhand geeigneter Kriterien bewertet. Abschließend werden die Ergebnisse der Analyse empirisch überprüft und für den praktischen Fall der ARENA2036 angewendet.
System- und Schnittstellenbeherrschung, Ideen- und Innovationsmanagement sowie die virtuell integrierte Produkt- und Prozessplanung sind zu entwickelnde Kompetenzen, die der veränderten Rolle des Menschen in der Industrie 4.0 Rechnung tragen. Dezidiert adressiert werden können diese in zukunftsweisend ausgerüsteten Lernfabriken.
The dawn of the 21st Century has witnessed a tremendous increase in trade pacts among nations, resulting in renewed hopes for sustainable enterprise development in emerging economies worldwide. Ghana and other sub-Saharan African (SSA) countries have signed onto several North-South and South-South free trade agreements with the hope of strengthening their presence in the international trade arena, and to promote economic growth in SSA. For over two decades, however, very little has changed, and many have dashed their high hopes as enterprises continue to struggle in SSA. Not even the African Continental Free Trade Agreement (AfCFTA) could renew the hopes of sceptics. Several studies opined that enterprises in SSA could improve their domestic and international competitiveness by establishing mutually beneficial partnerships with their counterparts from the Global North and South. This study delved into the issues that affect North-South and South-South business collaborations and recommends key success factors that could help promote mutually beneficial cross-border business partnerships. The research includes both literature and empirical information on the key success factors of business partnerships between African enterprises as well as between African enterprises and firms from the Global North. We approached the study qualitatively using a phenomenological research design. Research participants included important stakeholders in Africa and Europe's international trade and sustainable enterprise development ecosystem. The study identified several challenges with the current business collaborations and recommended new ways of making such partnerships more beneficial.
The use of digital, IT-based components in physical products is becoming increasingly relevant in practice. Surprisingly, the strategic impact of these "digitized products" has not received a lot of attention in IS research so far. Extant papers on the topic rely on ambiguous terminology (e.g., "smart products", "cyber-physical systems", "digital product-service systems") and underlying concepts differ widely. Based on an extensive literature review, this article provides an overview of the different terms and identifies five conceptual elements that form the building blocks of digitized products in research: "hybridity" (i.e., the combination of digital and physical components), connectivity, smartness, digitized product-service bundles (servitization of digitized products), and digitized product ecosystems. The implication for practitioners is that each element comes with different managerial challenges that companies need to address when incorporating the respective element in their products. The research implication is that each conceptual element is supported by different theoretical streams.
Die Wahl einer Klinik ist typischerweise dem stellvertretenden Kaufverhalten zuzuordnen – Kunden suchen vertrauenswürdige, persönliche Quellen zur Unterstützung der Entscheidung. Weiterempfehlungsverhalten kann durch Anreize unterstützt werden – grundlegende Voraussetzung für ehrliche Weiterempfehlung ist jedoch Kundenzufriedenheit. Kundenzufriedenheit entsteht durch den Abgleich zwischen erwarteter und empfundener Leistung – das erwartete Leistungsniveau wird häufig durch Unternehmen anderer Branchen determiniert. Individuen sind nicht in der Lage, die Bestandteile einer Erfahrung isoliert zu bewerten, sondern vermengen sie (Halo-Effekt) - Inkonsistenzen führen zu einer Abwertung der Gesamterfahrung. Darum ist im ersten Schritt die Identifikation der Gesamterfahrung (Kundenreise) erforderlich – diese beginnt vor und endet nach der unmittelbaren Interaktion des Kunden mit dem Unternehmen / der Klinik. Im zweiten Schritt sind die Zufriedenheitstreiber und die Interdependenzen zwischen den Einzelerfahrungen zu ermitteln um dann die Optimierung der Kundenreise zu planen und umzusetzen.
Executive education in IS is under the scrutiny of many institution for the potential to bring in financial revenues. However teaching executives can be a very challenging task because of the previous experiences, variation in their previous education, and multiplicity of motivations for pursuing a continuous education. The panel aims at sharing successful experiences and highlighting challenges of dealing with executive audiences. The panel will present the results of a large survey among executive students and identify the three most significant elements emerged from the survey: the importance of theory that is actionable, the importance of varied pedagogical tools and practices, and the importance of relevance beyond practical tools. Based on a survey that will be distributed to the audience at the beginning of the panel, the audience will be actively engaged in sharing their experiences on the three topics aiming at capitalize and sum up the collective knowledge of the room.
This paper takes a holistic view on an IP-traceability process in interorganizational R&D projects, as a particular Open innovation mode, aiming at showing different technologies which can be used in the front and backend of a traceability process and discussing these technologies in terms of their suitability for data from creativity processes in these projects. To achieve this goal a two-stage literature review on different technologies in the context of traceability was conducted. Then, criteria were derived from the characteristics of data from creativity processes and of interorganizational R&D projects, with which the resulting technologies were discussed. At the end, recommendations regarding suitable technologies for tracing individual creativity artifacts in interorganizational R&D projects were given.
Because of a high product and technology complexity, companies involve external partners in their research and development (R&D) processes. Interorganizational projects result, which represent temporary organizations. In these projects heterogenous organizations work closely together. Since project work is always teamwork, these projects face due to their characteristic’s major challenges on an organizational, relational, and content-related collaboration level. Thus, this paper raises the following research question: “How can a project team be supported on an organizational, relational, and content-related level in an interorganizational new product development setting?” To answer this research question, an explorative expert study was set up with two digital workshops using the interactive presentation tool Mentimeter. The results show that a cooperative innovation culture could support project teams on an organizational and relational level in the future in minimizing predominant problems. Moreover, it supports project teams for example in a functional communication. Furthermore, 18 values of a cooperative innovation culture result which are for example openness and transparency, risk and failure tolerance or respect. On a content-related level the results show that an adaptable tool which promotes creativity and collaboration method as well as content-related input support could be beneficial for problem-solving in an interorganizational new product development setting in the future. Because the tool can guide product developers through the process with suitable creativity and collaboration methods, can give content-related input and can enable interactive interchange on a table-top. Future research could mainly focus on the connection of the cooperative innovation culture and the tool since these potentially influence each other.
The German automotive industry succeeds by technological leadership. Several circumstances like politics of global warming or increased global competition force the whole industry to break new ground for new kinds of collaborative research and development. ARENA2036 represents such a new cooperation form that hosts diverse scientific and industrial partners in one campus in order to research innovative production and light-weight construction topics. The diversity of the partners in ARENA2036 challenges the new product development process (NPDP). In this case study the individual processes of the partners are analysed and a NPDP system is developed. The analysis bases on interviews covering all partners. The NPDP system supports the needs of the interdisciplinary and cross-company partners. It is characterized by a layered structure in order to preserve flexibility for research topics combined with institutionalized parts to manage interfaces. The final NPDP system is evaluated by the partners.
Industry 4.0 predicts that industrial processes, technological infrastructure and all corresponding Business processes, with the help of information and communication technology (ICT), will advance to integrated, ad-hoc interconnected and decentralized Cyber-Physical Production Systems (CPPS) with real-time capabilities of selfoptimization and adaptability. Considering this change, the human being will remain in a dominant role, because it is not expected that the human factor with its characteristics and capabilities will be substituted entirely by autonomously acting technology in the foreseeable future. The mechanical intelligence, for instance, is limited to the selection of predefined options, while human creativity, flexibility, the ability to learn and to improve are required to design and configure systems, processes and products. Humans have the expertise and experience to analyze, assess and solve - even in exceptional situations. However, the amount of purely manual tasks for shop floor workers will decrease. Their role will change from a manually executing to a proactive preconceiving worker with increased responsibility. Due to the growing degree of digitalization and interconnectedness, also the tasks and responsibilities for planning and design personnel will continuously expand and become more complex. The work in versatile ad-hoc networks with advanced ICT-Tools and assistance systems will lead to increased requirements regarding the knowledge, capability and capacity of the respective employees. The on-going pervasion of IT and emergence of systems with unprecedented complexity specifically require significantly improved capabilities in analysis, abstraction, problem solving and decision making from future labour. Accordingly, the industry is asking for graduates that are educated interdisciplinary and practice-oriented. Some universities already meet these expectations, using learning factories for realistic, action-oriented classes and trainings. Lecturers are confronted with the challenge to identify future job profiles and correlated qualification requirements, especially regarding the conceptualization and implementation of CPPS, and to adapt and enhance their education concepts and methods adequately and consequently. For the new, virtual world of manufacturing a proper understanding of engineering as well as Computer sciences is essential. Industry 4.0 implies this interdisciplinary split. Integrated competencies for product and process planning and design, methodological competencies for systematical idea and innovation management as well as a holistic system and Interface competence will be crucial to achieve interconnection of physical and digital processes and machines. The Vienna University of Technology and the ESB Reutlingen committed to integrate key aspects of Industry 4.0 into their respective learning factories successively. Thus, the students will act as the coordinators of the CPPS and thereby remain in the center of all learning and implementation activities.
The market for indoor positioning systems for a variety of applications has grown strongly in recent years. A wide range of systems is available, varying considerably in terms of accuracy, price and technology used. The suitability of the systems is highly dependent on the intended application. This paper presents a concept to use a single low-cost PTZ camera in combination with fiducial markers for indoor position and orientation determination. The intended use case is to capture a plant layout consisting of position, orientation and unique identity of individual facilities. Important factors to consider for the selection of a camera have been identified and the transformation of the marker pose in camera coordinates into a selectable plant coordinate system is described. The concept is illustrated by an exemplary practical implementation and its results.
Increasingly volatile market conditions and manufacturing environments combined with a rising demand for highly personalized products, the emergence of new technologies like cyber-physical systems and additive manufacturing as well as an increasing cross-linking of different entities (Industrie 4.0) will result in fundamental changes of future work and logistics systems. The place of production, the logistical network and the respective production system will underlie the requirements of constant changes and therefore sources and sinks of logistical networks have to obey the versatility of (cyber-physical) production systems. To cope with the arising complexity to control and monitor changeable production and logistics systems, decentralized control systems are the mean of choice since centralized systems are pushed to their limits in this regard. This paradigm shift will affect the overall concept under which production and logistics is planned, managed and controlled and how companies interact and collaborate within the emerging value chains by using dynamic methods to generate and execute the created network and to allocate available resources to fulfill the demand for customized products. In this field of research learning factories, like the ESB Logistics Learning Factory at ESB Business School (Reutlingen University), provide a great potential as a risk free test bed to develop new methods and technical solutions, to investigate new technologies regarding their practical use and to transfer the latest state of knowledge and specific competences into the training of students and professionals. Keeping with these guiding principles ESB Business School is transferring its existing production system into a cyber-physical production system to investigate innovative solutions for the design of human-machine collaboration and technical assistance systems as wells as to develop decentralized control methods for intralogistics systems following the requirements of changeable work systems including the respective design of dynamic inbound and outbound logistic networks.
Rising consumption due to a growing world population and increasing prosperity, combined with a linear economic system have led to a sharp increase in garbage collection, general pollution of the environment and the threat of resource scarcity. At the same time, the perception of environmental protection becomes more sensitive as the consequences of neglecting sustainable business and eco-efficiency become more visible. The Circular Economy (CE) could reduce waste production and is able to decouple economic growth from resource consumption, but most of the products currently in use are not designed for the reuse-forms of the CE. In addition, the decision-making process of the End of-Usage (EoU) products regarding the following steps has further weaknesses in terms of economic attractiveness for the participants, which leads to low return rates and thus the disposal is often the only alternative.
This paper proposes a model of the decision-making process, which uses machine learning. For this purpose, a Machine Learning (ML) classification is created, by applying the waterfall model. An artificial neural network (ANN) uses information about the model, use phase and the obvious symptoms of the product to predict the condition of individual components. The resulting information can be used in a downstream economic and ecological evaluation to assess the possible next steps. To test this process comprehensive training data is simulated to train the ANN. The decentralized implementation, cost savings and the possibility of an incentive system for the return of an end-of-usage product could lead to increased return rates. Since electronic devices in particular are attractive for the CE, laptops are the reference object of this work. However, the obtained findings are easily applicable to other electronic devices.
The imparting of knowledge and skills in STEM education, especially under the influence of the Covid-19 pandemic, is increasingly taking place online and through digital formats. The partially asynchronous instruction eliminates, on the one hand, the social relation in the learning process and, on the other hand, the direct experience with physical objects. Here, the digital learning systems provide learning tools and controls to support the learning process on a general basis. Existing methods for simulating physical objects (digital twins) are also used to a minimal extent. The following approach presents a learning system framework that enables individualized learning, including all dimensions (social, physical). Implementing a concept that uses a personalized assistance system to orchestrate the individual learning steps enables efficient and effective learning. Applying the learning system framework exemplifies the STEM education at Reutlingen University in the logistics learning factory Werk150.
In a recently developed study programme at Reutlingen University, which focuses on practical orientations, an innovative product with solid company references is to be defined and realised by student teams. On the basis of this product, all subjects of the business engineering study programme “Sustainable Production and Business” are taught. By focusing on three main paths of future skills that have been developed by NextSkills to analyse upcoming social changes, global challenges and fields of work that are innovation-driven and agile, the new study programme aims to create responsible leaders who will shape global businesses respectfully. Thereby, different TRIZ tools help to support students in developing their own products with a focus on sustainability and pay off on the future skills enhancement. Further, students get to know TRIZ tools in an unbiased way, unburdened by too much theory, and are thus continuously supported in the progressing product development process that accompanies their studies. Hence, students perceive TRIZ on the one hand as a method to develop sustainable products and, on the other hand, to find sustainable solutions for everyday problems. The knowledge and positive experiences gained in this way should then arouse curiosity for the TRIZ class at the end of the study programme. The students can graduate with a TRIZ Level 1 certificate. Thereby, as many students as possible are introduced to the TRIZ methods, and the TRIZ tool is spread widely.
Gamification, the use of game elements for non-gaming purposes, may just make a huge impact on education, a contribution the world in general and South Africa in particular, desperately needs. In today’s fast-paced work environment, there is not only a severe skills shortage, but also a great need for graduates with practical knowledge - students that are not purely “book smart”. Didactic teaching habits have created an education realm in which reciting facts is more often than not what gets students to pass. Learning factories are physical, operational factories that serve as exemplary and realistic hands-on learning environments and provide an important step towards more industry-prepared graduates. Top universities around the world are establishing such environments and are showing superb results. This paper explores the potential benefit of applying gamification in such a setting to enhance the learning environment even further, and provide opportunities for training otherwise difficult to teach topics, such as shop floor management.
Im Februar 2011 wurden die Autoren von der Metropolitan School Frankfurt eingeladen, in einer vierstündigen Unterrichtseinheit die Grundlagen von systemischem Denken und System Dynamics einer vierten Klasse mit Kindern im Alter von 9 und 10 Jahren zu vermitteln. Inhaltlicher Themenschwerpunkt sollten Ökosysteme sein, die im Curriculum eine mehrwöchige Fokuslehreinheit bilden. Als Ergebnis eines Austauschs mit dem Klassenlehrer wurde der Fokus auf zwei Handlungsstränge gelegt: Räuber-Beute-Systeme sind für Viertklässler inhaltlich interessant und fügen sich passsend in die Unterrichtseinheit der Jahrgangstufe ein. Als weiteres, komplexeres Themengebiet wurd der Klimawandel gewählt. Beide Themen haben den gewünschten inhaltlichen Bezug zum Schwerpunkt "Ökosysteme".
Started as a mono-line focused purely on savings, in late 2012 ING Direct Spain was becoming a full-service bank. To this end, the bank had substantially increased its product- and channel-portfolio. ING Direct Spain originally provided "simple", "good value for money" products in an "easy to deal with" way at low cost supported by a direct model. But with the growth in its product portfolio during the previous decade and the ambitious goal of becoming a full-service bank, an increase in complexity seemed inevitable. Like many businesses in the global, digital economy, ING Direct Spain found it needed to decide which complexity created value for its customers and which one not. It also learned that IT can contribute to complexity and/or help manage complexity.
This case offers a close look at challenges of growing a company by increasing product complexity to provide comprehensive yet simple services.
Framework for integrating intelligent product structures into a flexible manufacturing system
(2023)
Increasing individualisation of products with a high variety and shorter product lifecycles result in smaller lot sizes, increasing order numbers, and rising data and information processing for manufacturing companies. To cope with these trends, integrated management of the products and manufacturing information is necessary through a “product-driven” manufacturing system. Intelligent products that are integrated as an active element within the controlling and planning of the manufacturing process can represent flexibility advantages for the system. However, there are still challenges regarding system integration and evaluation of product intel-ligence structures. In light of these trends, this paper proposes a conceptual frame-work for defining, analysing, and evaluating intelligent products using the example of an assembly system. This paper begins with a classification of the existing problems in the assembly and a definition of the intelligence level. In contrast to previous approaches, the analysis of products is expanded to five dimensions. Based on this, a structured evaluation method for a use case is presented. The structure of solving the assembly problem is provided by the use case-specific ontology model. Results are presented in terms of an assignment of different application areas, linking the problem with the target intelligence class and, depending on the intelligence class of the product, suggesting requirements for implementation. The conceptual frame-work is evaluated by utilising a case study in a learning factory. Here, the model-mix assembly is controlled actively by the workpiece carrier in terms of transferring the variant-specific work instructions to the operator and the collaborative robot (cobot) at the workstations. The resulting system thus enables better exploitation of the poten-tials through less frequent errors and shorter search times. Such an implementation has demonstrated that the intelligent workpiece carrier represents an additional part for realising a cyber-physical production system (CPPS).
Latest advancements in new technologies have made it possible to fully automate the in-plant material flow of small load carriers between the warehouse and the production or assembly line. However, none of methods available in literature fully addresses the planning and dimensioning problem of a logistic system based on these new autonomous technologies. This paper is set to present a method to estimate the fleet size of the new logistic system. After an overview on the state of the art, the method based on combinatorics and probability theory will be explained. A short discussion and suggestions for forthcoming research will conclude the paper.
The fifth mobile communications generation (5G) can lead to a substantial change in companies enabling the full capability of wireless industrial communication. 5G with its key features of providing Enhanced Mobile Broadband, Ultra-Reliable and Low-Latency Communication, and Massive Machine Type Communication will support the implementation of Industry 4.0 applications. In particular, the possibility to set-up Non-Public Networks provides the opportunity of 5G communication in factories and ensures sole access to the 5G infrastructure offering new opportunities for companies to implement innovative mobile applications. Currently there exist various concepts, ideas, and projects for 5G applications in an industrial environment. However, the global rollout of 5G systems is a continuous process based on various stages defined by the global initiative 3rd Generation Partnership Project that develops and specifies the 5G telecommunication standard. Accordingly, some services are currently still far from their final performance capability or not yet implemented. Additionally, research lacks in clarifying the general suitability of 5G regarding frequently mentioned 5G use cases. This paper aims to identify relevant 5G use cases for intralogistics and evaluates their technical requirements regarding their practical feasibility throughout the upcoming 5G specifications.
The paper focuses on a recently introduced paradigm for the logistic process of picking, with respect to the man-to-goods and goods-to-man concept: the robot to-goods. First the task and system architecture of the fast deployable autonomous commissioning system are described, then the economic efficiency of the system is analysed in a real business case scenario using a simplified method, which is explained and discussed. The clearly positive net present value of the investment and the short payback period obtained in the business case prove how the robot-to-goods paradigm for the commissioning process, implemented through the automation of the forklift platform, is economically attractive for small and medium size enterprises.
In times of climate change and growing urbanization, the way food is produced and consumed also changes. Meanwhile, digitization is transforming farming practices, which also applies to the domestic growing of crops. More and more so-called smart home farms (SHF) are finding their way into private households. This paper conceptualizes the unique nature of enabled smart services and their underlying technology. Following an inductive interpretive approach, this study explores the antecedents of smart home farming practices. Our sample consists of eleven actual smart home farmers. We found six constructs to be of salient importance: expected outcomes related to harvesting, positive feelings, and sustainability; a combination of one's affinity for green and novel technologies; and the smartness and visibility of the enabled services. In the outlook, we present some preliminary thoughts for testing our qualitative findings.
Increasing flexibility, greater transparency and faster adaptability play a key role in the development of future intralogistics. Ever-changing environmental conditions require easy extensibility and modifiability of existing bin systems. This research project explores approaches to transfer the Internet of Things (IoT) paradigm to intralogistics. This allows a synchronization of the material and information flow. The bin is enabled by the implementation of adequate hardware and software components to capture, store, process and forward data to selected system subscribers. Monitoring the processes in the intralogistics by means of the smart bin system ensures the implementation of appropriate actions in case of defined deviations. By using explorative expert interviews with representatives from the automotive and pharmaceutical industries, seven practical application scenarios were defined. On this basis, the requirements of smart bin systems were examined. For each individual case of application, a system model was created in order to obtain an overview of the system components and thus reveal similarities and differences. Based on the similarities of the system models, a general requirement profile was derived. After the hardware components of the bin system had been determined, a utility analysis was carried out to find the adequate IoT software. The utility analysis was conducted with a focus on data acquisition and data transfer, data storage, data analysis, data presentation as well as authorization management and data security. The results show that there is great interest in easily expandable and modifiable bin systems, as in all cases, the necessary information flow in the existing bin system has to be improved by means of new IoT hardware and software components.
Evaluation of human-robot order picking systems considering the evolution of object detection
(2022)
The automation of intralogistic processes is a major trend, but order picking, one of the core and most cost-intensive tasks in this field, remains mostly manual due to the flexibility required during picking. Reacting to its hard physical and ergonomic strain, the automation of this process is however highly relevant. Robotic picking system would enable the automation of this process from a technical point of view, but the necessity for the system to evolve in time, due to dynamics of logistic environments, faces operations with new challenges that are hardly treated in literature. This unknown scares potential investors, hindering the application of technically feasible solutions. In this paper, a model for the evaluation of the additional cost of training of automated systems during operations is presented, that also considers the savings enabled by the system after its evolution. The proposed approach, that considers different parameters such as capacity, ergonomics and cost, is validated with a case study and discussed.
According to a recent survey the great majority of players in logistics are planning to adopt one or more robotic solutions until 2019. Technical solutions for automation of processes in logistics are often available as a market-ready product, but the lack of standardization and skepticism towards long term investments are often the reasons why these solutions are not implemented on a large scale. This paper is set to bridge the gap between the world of technologies and the one of applications in order to help investors, robot producers and system integrators to decide on which branch of logistics to set their focus. The three main branches Courier Express Parcel (CEP), contract logistics and production logistics are briefly defined and distinguished through their characteristic factors and parameters. Then a method based on the analysis of three parameters (operative costs, required performance and flexibility) in the three branches is set to identify the most convenient branch of logistics for investing in new technologies, namely the one in which the risk of investment is lower, the return is higher and faster. The conclusion of the method shows that higher labor costs, strict regulations and higher standardization make the production logistics the most suitable branch for investments in emerging automation solutions.
It has been recognized that to increase the competetitiveness of international higher education institutions in the global education market, their international graduates' employability must be enhanced. The present paper investigates, from the employers' perspective, the possibilities of international graduates with domestic degrees in Russia and Germany to find jobs in the Russian and German labor market. It uses qualitative open-ended interviews at 12 companies in St. Petersburg, Russia and Germany, which are engaged with International Business activities. The investigation concentrates on the employment opportunities and barriers of international graduates from an individual, organizational and an institutional perspective.
The research highlighted the main differences and similarities in the perception of the HR managers in both countries. In the German labor market, companies have a high demand for international graduates, especially those operating internationally, highly demand international graduates, emphasizing the existence of international trainee programs and the need to reflect the diversity of their business in the diversity of their staff. In contrast, Russian companies showed a positive predisposition for international graduates but no demand. Domestic firms focus their efforts on expatriate programs and/or highly-qualified specialists rather than trainee programs to hire internationals. On the other hand, insitutional barriers exist, as well as a lack of support with regards to regulations and requirements for entering both Russian and German markets. The national language requirement was stressed as the major barrier towards hiring internationals in both countries. The investigation from an organizational point of view revealed that interviewers showed a positive predisposition towards international graduates in both countries, focusing on the graduate's skill set rather than their nationality. This research explores the opportunities and barriers and discusses the implications for students and universities.
Electronic word-of-mouth (eWoM) communication plays an increasingly important role in modern business. The underlying concept of word-of-mouth (WoM) communication is well researched and has proved highly significant in respect of its impact on customers purchase behavior. However, due to the advent of digital technologies, decision-making among customers is progressively shifting to the online world. Consequently, eWoM has received a lot of attention from the academic community. As multiple research papers focus on specific facets of eWoM, there is a need to integrate current research results systematically. Thus, this paper presents a scientific literature analysis in order to determine the current state-of-the-art in the field of eWoM. Five main research areas were analyzed, supporting the need for further eWoM studies and providing a structured overview of existing results.
Es wird gezeigt, wie bei Fernspeisung die Vorhersage der Erwärmung mit entsprechender Modellierung verbessert werden kann und wie der Einfluss von Material und Form des Kabelkanals die Erwärmung und das das Temperaturprofil des Bündels beeinflusst. Es wird auch vorgestellt, dass die erhöhte Erwärmung von Metallkabelkanälen auf die geringere Emissivität zurückzuführen ist und wie das verbessert werden kann.
Die zunehmende Technologie- und Produktkomplexität führen dazu, dass sich immer mehr Unternehmen für ihre F&E mit externen Organisationen vernetzen. So entstehen interorganisationale F&E-Projekte, welche temporäre Organisationen darstellen. Forschungsfragen zu diesen Projekten sind u.a. hinsichtlich der Praktiken und Verhaltensregeln offen. Über ein kulturbewusstes Projektmanagement können kooperations- und innovationsförderliche Praktiken und Verhaltensregeln aufgebaut werden, die für diese F&E-Projekte essenziell sind. So ist die Forschungsfrage dieses Beitrags, wie ein projektkulturbewusstes Management interorganisationaler F&E-Projekte erfolgen kann. Dafür wird auf Basis der theoretischen Grundlagen zum F&E-Projektmanagement, zu menschlichen Handlungssystemen und Ebenen der Zusammenarbeit, zu Kultur und Verhalten ein projektkulturbewusstes Management-Modell entwickelt. Das Modell umfasst zwei Teile. Im ersten Teil wird der Bereich aufgezeigt, in welchem sich die Projektkultur entwickelt. Im zweiten Teil wird aufgezeigt, wie die Faktoren für ein wahrscheinlich kooperatives und innovatives Verhalten innerhalb dieses Bereiches gestaltet werden sollten.
Efficiency in supply chain risk management (SCRM) is a major topic in industries with serial production and a complex supply chain due to limited management and financial resources. A high number of possible risk situations and intertwined processes create a more challenging environment for resource allocation. Managers cannot perform SCRM in all possible supply chain areas and hence have to decide where available resources should be utilised for highest possible risk reduction. This makes it important to quickly and systematically evaluate input and output relationships among risk mitigation actions to determine which actions are deployed first for efficient risk level reduction. This paper introduces a new SCRM method based on the failure mode and effects analysis (FMEA) in order to perform an efficiency-oriented risk action prioritisation. By considering the cost-benefit evaluation of identified risk mitigation actions for each assessed risk and by determining the implementation effort for risk mitigation actions, also considered as the cost for realising a specific risk action the method allows finding those risk and risk mitigation actions, which are most efficient for risk reduction and should be implemented first in the process of risk steering.
In its 100+ years of company history, IBM reinvented itself multiple times. In the last 20 years, IBM had shifted from individual products to integrated solutions and moved to become a globally integrated enterprise with standardized processes. In 2014, the expanding adoption of social, mobile, analytics, and cloud (SMAC) technologies generated excitement in the industry. IBM believed these technologies presented a huge growth opportunity. Simultaneously, management viewed SMAC technologies as disruptive forces demanding transformative changes to how IBM worked. And introducing new ways of working to 400,000 employees in 175 countries was a daunting task.
Based on personal interviews with 17 IBM business and IT executives, the case illustrates organizational challenges of introducing current technologies that even providers of these technologies face – in other words, when they “eat their own cooking.” It demonstrates the difficulties large companies face when implementing technologies that students use daily and take for granted.
Early exposure makes the entrepreneur: how economics education in school influences entrepreneurship
(2022)
Many countries that seek to boost their economy share the goal of promoting entrepreneurship. Whereas there is ample research on the predictors of entrepreneurship during adulthood, we know little about how pre-adulthood experience influences entrepreneurship later in life. Using a natural experiment, this paper examines whether introducing economics classes in school enhances entrepreneurial behavior in adulthood. Our difference-in-differences approach exploits curricula reforms across German states that introduced compulsory economics education classes in secondary schools. Using information on school and labor market careers for more than 10,000 individuals from 1984 to 2019, we find that the reform increases students’ entrepreneurial activities by three percentage points. Examining gender differences, we find that economics classes equally benefit female and male students. Our results advance our understanding of how pre-adulthood experiences shape individuals’ entrepreneurial behavior.
Reacting to ever-changing business environments, in the last decade complex systems of systems accomplished giant leaps forward leading to great technological flexibility. However, this dimension of flexibility is often limited by the rigidity of super-ordinated planning systems. Especially when hybrid teams of automated and human resources are in place, the dynamic assignment of tasks taking into account ergonomics remains a challenge. After exposing a gap in the state of the art on the topic, this paper presents an approach to include ergonomics in dynamic resource allocation models. Combining and complementing existing approaches, the presented method monitors the actual ergonomic burden of the resources during a shift and it provides a linear optimization model to steer the resource allocation process.