660 Technische Chemie
Refine
Document Type
- Journal article (22) (remove)
Is part of the Bibliography
- yes (22)
Institute
- Life Sciences (18)
- Texoversum (3)
- Technik (1)
Publisher
- Elsevier (8)
- Wiley (8)
- De Gruyter (2)
- Hanser (1)
- IOP Publishing (1)
- MDPI (1)
- Sage Publishing (1)
Bioenergy production is a new and promising industry in Ecuador. However, a confusing variety of laws, which are spread among different regulating institutions, regulate the agricultural sector. Such dispersion makes it difficult for farmers and businesses to understand applicable rights, duties, regulations and agricultural policies. Moreover, this rather young industry lacks important experience. In the first section of this work, the existing Ecuadorian legislation on bioenergy is presented and analyzed. Then, a brief, thorough analysis and comparison are carried out for experiences not only in developed countries, but also with similar cultural frameworks and comparable climatic conditions. The results are summarized as specific recommendations that have been handed to the National Agricultural Chamber of Ecuador from academia for the proposal of a Unified Agricultural Code established in the Ecuadorian legal hierarchy as an Organic Law.
Fast pyrolysis as a valorization mechanism for banana rachis and low-density polyethylene waste
(2021)
Banana rachis and low-density polyethylene (LDPE) were selected as secondary feedstocks for the study of fast pyrolysis in a free-fall reactor. The experiments were performed at 600 °C for banana rachis and 450 °C for LDPE, based on literature and thermogravimetric analysis. The gaseous products of both feedstocks present similar composition in the C1-C2 compounds, while C3 compounds are only found in LDPE. The liquid products from banana and LDPE correspond to functional groups and shorter hydrocarbons, respectively. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) analyses of the char showed important morphological changes to spheres in LDPE and structural changes due to thermal decomposition in the biomass. The pyrolysis char has high potential as adsorbent, encapsulation, or catalyst.
Deep learning-based fabric defect detection methods have been widely investigated to improve production efficiency and product quality. Although deep learning-based methods have proved to be powerful tools for classification and segmentation, some key issues remain to be addressed when applied to real applications. Firstly, the actual fabric production conditions of factories necessitate higher real-time performance of methods. Moreover, fabric defects as abnormal samples are very rare compared with normal samples, which results in data imbalance. It makes model training based on deep learning challenging. To solve these problems, an extremely efficient convolutional neural network, Mobile-Unet, is proposed to achieve the end-to-end defect segmentation. The median frequency balancing loss function is used to overcome the challenge of sample imbalance. Additionally, Mobile-Unet introduces depth-wise separable convolution, which dramatically reduces the complexity cost and model size of the network. It comprises two parts: encoder and decoder. The MobileNetV2 feature extractor is used as the encoder, and then five deconvolution layers are added as the decoder. Finally, the softmax layer is used to generate the segmentation mask. The performance of the proposed model has been evaluated by public fabric datasets and self-built fabric datasets. In comparison with other methods, the experimental results demonstrate that segmentation accuracy and detection speed in the proposed method achieve state-of-the-art performance.
In addition to increased safety by detecting possible overload, continuous component monitoring by sensor integration makes the use of fiber reinforced plastics more cost-effective. Since the components are continuously monitored, one can switch from time-based to condition-based maintenance. However, the integration of conventional sensor components causes weak points, as foreign objects are inserted into the reinforcing structure. In this paper, we examine the use of the textile reinforcement as a sensor in itself. We describe how bending sensors can be formed by slightly modifying in the composite’s reinforcement structure. We investigated two different sensor principles. (1) The integration of textile plate capacitors into the structure; (2) The construction of textile piezo elements as part of the reinforcing structure. The bending test results reveal that textile plate capacitors show a load-dependent signal output. The samples with textile piezo elements show a significant increase in signal strength.
Woven piezoelectric sensors as part of the textile reinforcement of fiber reinforced plastics
(2019)
Sensor integration in fiber reinforced plastic (FRP) structures enables online process and structural health monitoring (SHM). This paper describes the development and application of woven fabric-based piezoelectric impact and bending sensors for integration into FRP. The work focuses on design and characterization of woven piezoelectric sensors, especially as a part of the reinforcement structure. The reinforcement of the component acts as a sensor in itself and therefore no additional external objects in the form of sensor components or sensor fibers, which could create unwanted weak points within the FRP, are added. The bending test results reveal a direct relationship between the applied load and the sensor signal. Furthermore, the appropriate sensor position in the component cross section was determined and the influence of thermal polarization on the sensor properties was investigated.
Polycaprolactone (PCL) was electrospun with the addition of arginine (Arg), an α-amino acid that accelerates the haeling process. The efficient needleless electrospinning technique was used for the fabrication of the nanofibrous layers. The materials produced consisted mainly of fibers with diameters of between 200 and 400 nm. Moreover, both microfibers and beads were present within the layers. Higher bead sized were observed with the increased addition of arginine.
The self-healing effect of melamine-based surfaces, triggered by temperature, was investigated. The temperature triggered reversible healing chemistry, on which the self-healing effect is based, was the Diels-Alder (DA) reaction between furan and malemeide groups. Melamine-furan containing building blocks were connected by multi-functional maleimide crosslinker via a Diels-Alder (DA) reaction to giva a DA adduct. The DA adduct was then reacted with formaldehyde to form a network by conventional condensation reaction of melamine amino groups with formaldehyde. The obtained resin was characterised and used for the impregnation of paper. Impregnated papers and neat resin werde used to perform scratch-healing tests and mechanical analysis of the novel coating system.
Estimating molar solubility from the Hildebrand-Scott relation employing Hansen solubility parameters (HSP) is widely presumed a valid semi quantitative approach. To test this presumption and to determine quantitatively the inherent accuracy of such a solubility prognosis, l-ascorbic acid (LAA) was treated as an example of a commercially important solute. Analytical calculus and Monte Carlo (MC) simulation were performed for 20 common solvents with total HSP ranging from 14.5 to 33.0 (MPa)0.5 utilizing validated material data. It was found that, due to the uncertainty of the material data used in the calculations, the solubility prediction had a large scattering and, thus, a low precision.
We report an investigation into the distribution of copper oxidation states in oxide films formed on the surfaces of technical copper. The oxide films were grown by thermal annealing at ambient conditions and studied using Auger depth profiling and UV–Vis spectroscopy. Both Auger and UV–Vis data were evaluated applying multivariate curve resolution (MCR). Both experimental techniques revealed that the growth of Cu2O dominates the initial ca. 40 nm of oxide films grown at 175 °C, while further oxide growth is dominated by CuO formation. The largely coincident results from both experimental approaches demonstrates the huge benefit of the application of UV–Vis spectroscopy in combination with MCR analysis, which provides access to information on chemical state distributions without the need for destructive sample analysis. Both approaches are discussed in detail.
A new two-dimensional fluorescence sensor system was developed for in-line monitoring of mammalian cell cultures. Fluorescence spectroscopy allows for the detection and quantification of naturally occurring intra- and extracellular fluorophores in the cell broth. The fluorescence signals correlate the the cells' current redox state and other relevant process parameters. Cell culture pretests with twelve different excitation wavelengths showed that only three wavelengths account for a vast majority of spectral variation. Accordingly, the newly developed device utilizes three high-power LEDs as excitation sources in combination with a back-thinned CCD-spectrometer for fluorescence detection.