Refine
Year of publication
- 2020 (312) (remove)
Document Type
- Journal article (144)
- Conference proceeding (93)
- Book chapter (41)
- Book (10)
- Report (9)
- Doctoral Thesis (6)
- Working Paper (4)
- Anthology (3)
- Issue of a journal (2)
Is part of the Bibliography
- yes (312)
Institute
- ESB Business School (105)
- Informatik (101)
- Life Sciences (43)
- Technik (37)
- Texoversum (25)
Publisher
- Springer (58)
- Elsevier (30)
- Hochschule Reutlingen (20)
- IEEE (16)
- De Gruyter (13)
- MDPI (13)
- Association for Computing Machinery (9)
- Wiley (8)
- Gesellschaft für Informatik e.V (6)
- AMD Akademie Mode & Design (5)
Tissue constructs of physiologically relevant scale require a vascular system to maintain cell viability. However, in vitro vascularization of engineered tissues is still a major challenge. Successful approaches are based on a feeder layer (FL) to support vascularization. Here, we investigated whether the supporting effect on the self‐assembled formation of prevascular‐like structures by microvascular endothelial cells (mvECs) originates from the FL itself or from its extracellular matrix (ECM). Therefore, we compared the influence of ECM, either derived from adipose‐derived stem cells (ASCs) or adipogenically differentiated ASCs, with the classical cell‐based FL. All cell‐derived ECM (cdECM) substrates enabled mvEC growth with high viability. Prevascular‐like structures were visualized by immunofluorescence staining of endothelial surface protein CD31 and could be observed on all cdECM and FL substrates but not on control substrate collagen I. On adipogenically differentiated ECM, longer and higher branched structures could be found compared with stem cell cdECM. An increased concentration of proangiogenic factors was found in cdECM substrates and FL approaches compared with controls. Finally, the expression of proteins associated with tube formation (E‐selectin and thrombomodulin) was confirmed. These results highlight cdECM as promising biomaterial for adipose tissue engineering by inducing the spontaneous formation of prevascular‐like structures by mvECs.
Based on a survey among customers of seven German municipal utilities, we estimate two regression models to identify the most prospective customer segments and their preferences and motivations for participating in peer-to-peer (P2P) electricity trading and develop implications for decision-makers in the energy sector and policy-makers for this currently relatively unknown product. Our results show a large general openness of private households towards P2P electricity trading, which is also the main predictor of respondents' intention to participate. It is mainly influenced by individuals’ environmental attitude, technical interest, and independence aspiration. Respondents with the highest willingness to participate in P2P electricity trading are mainly motivated by the ability to share electricity, and to a lesser extent by economic reasons. They also have stronger preferences for innovative pricing schemes (service bundles, time-of-use tariffs). Differences between individuals can be observed depending on their current ownership (prosumers) or installation probability of a microgeneration unit (consumers, planners). Rather than current prosumers, especially planners willing to install microgeneration in the foreseeable future are considered to be the most promising target group for P2P electricity trading. Finally, our results indicate that P2P electricity trading could be a promising niche option in the German energy transition.
In digital transformierten Arbeitswelten organisieren die Mitarbeitenden ihre Arbeitszeit, ihren Arbeitsort und die Art und Weise, wie sie Aufgaben erledigen, in größerem Umfang selbst. Unternehmen, die im Zuge des Transformationsprozesses den Grad der Selbstorganisation erhöhen möchten, stehen vor einer komplexen Herausforderung. Selbstorganisation betrifft zahlreiche Elemente der Organisation wie Arbeitsaufgaben und Rollen, Führung, Regeln und Kompetenzen. Auf Basis eines empirisch entwickelten Bezugsrahmens, dem Digitalisierungsatlas, können die verschiedenen Elemente integrativ betrachtet und die Wechselwirkungen zwischen den Dimensionen in den Blick genommen werden. Wird Selbstorganisation ausgehend von der Autonomie der Beschäftigten, Arbeitsaufgaben und die eigene Rolle in der Organisation selbst zu beeinflussen, in den Blick genommen, sind insbesondere die Wechselwirkungen zwischen den organisationalen Dimensionen sowie Führung relevant. Die Spannungen zwischen diesen Dimensionen werden näher fokussiert. Insgesamt zeigt der Beitrag auf, dass Selbstorganisation nicht als ein unabhängiges Phänomen verstanden werden kann, sondern stets in Wechselwirkung mit anderen Dimensionen steht.
Elasticity is considered to be the most beneficial characteristic of cloud environments, which distinguishes the cloud from clusters and grids. Whereas elasticity has become mainstream for web-based, interactive applications, it is still a major research challenge how to leverage elasticity for applications from the high-performance computing (HPC) domain, which heavily rely on efficient parallel processing techniques. In this work, we specifically address the challenges of elasticity for parallel tree search applications. Well-known meta-algorithms based on this parallel processing technique include branch-and-bound and backtracking search. We show that their characteristics render static resource provisioning inappropriate and the capability of elastic scaling desirable. Moreover, we discuss how to construct an elasticity controller that reasons about the scaling behavior of a parallel system at runtime and dynamically adapts the number of processing units according to user-defined cost and efficiency thresholds. We evaluate a prototypical elasticity controller based on our findings by employing several benchmarks for parallel tree search and discuss the applicability of the proposed approach. Our experimental results show that, by means of elastic scaling, the performance can be controlled according to user-defined thresholds, which cannot be achieved with static resource provisioning.
Different types of raw cotton were investigated by a commercial ultraviolet-visible/near infrared (UV-Vis/NIR) spectrometer (210–2200 nm) as well as on a home-built setup for NIR hyperspectral imaging (NIR-HSI) in the range 1100–2200 nm. UV-Vis/NIR reflection spectroscopy reveals the dominant role proteins, hydrocarbons and hydroxyl groups play in the structure of cotton. NIR-HSI shows a similar result. Experimentally obtained data in combination with principal component analysis (PCA) provides a general differentiation of different cotton types. For UV-Vis/NIR spectroscopy, the first two principal components (PC) represent 82 % and 78 % of the total data variance for the UV-Vis and NIR regions, respectively. Whereas, for NIR-HSI, due to the large amount of data acquired, two methodologies for data processing were applied in low and high lateral resolution. In the first method, the average of the spectra from one sample was calculated and in the second method the spectra of each pixel were used. Both methods are able to explain ≥90 % of total variance by the first two PCs. The results show that it is possible to distinguish between different cotton types based on a few selected wavelength ranges. The combination of HSI and multivariate data analysis has a strong potential in industrial applications due to its short acquisition time and low-cost development. This study opens a novel possibility for a further development of this technique towards real large-scale processes.
The data presented in this article characterize the thermomechanical and microhardness properties of a novel melamine-formaldehyde resin (MF) intended for the use as a self-healing surface coating. The investigated MF resin is able to undergo reversible crosslinking via Diels Alder reactive groups. The microhardness data were obtained from nanoindentation measurements performed on solid resin film samples at different stages of the self-healing cycle. Thermomechanical analysis was performed under dynamic load conditions. The data provide supplemental material to the manuscript published by Urdl et al. 2020 (https://doi.org/10.1016/j.eurpolymj.2020.109601) on the self-healing performance of this resin, where a more thorough discussion on the preparation, the properties of this coating material and its application in impregnated paper-based decorative laminates can be found.
Thermoplastic polymers like ethylene-octene copolymer (EOC) may be grafted with silanes via reactive extrusion to enable subsequent crosslinking for advanced biomaterials manufacture. However, this reactive extrusion process is difficult to control and it is still challenging to reproducibly arrive at well-defined products. Moreover, high grafting degrees require a considerable excess of grafting reagent. A large proportion of the silane passes through the process without reacting and needs to be removed at great expense by subsequent purification. This results in unnecessarily high consumption of chemicals and a rather resource-inefficient process. It is thus desired to be able to define desired grafting degrees with optimum grafting efficiency by means of suitable process control. In this study, the continuous grafting of vinyltrimethoxysilane (VTMS) on ethylene-octene copolymer (EOC) via reactive extrusion was investigated. Successful grafting was verified and quantified by 1H-NMR spectroscopy. The effects of five process parameters and their synergistic interactions on grafting degree and grafting efficiency were determined using a face-centered experimental design (FCD). Response surface methodology (RSM) was applied to derive a causal process model and define process windows yielding arbitrary grafting degrees between <2 and >5% at a minimum waste of grafting agent. It was found that the reactive extrusion process was strongly influenced by several second-order interaction effects making this process difficult to control. Grafting efficiencies between 75 and 80% can be realized as long as grafting degrees <2% are admitted.
Das Urteil des Bundesverfassungsgerichts (BVerfG) vom 5. Mai 2020 ist Schlusspunkt und zugleich Neuanfang nach einer jahrelangen verfassungsrechtlichen und ökonomischen Auseinandersetzung. Im Prinzip geht es um die konstituierenden Prinzipien der Eurozone sowie das Mandat der Europäischen Zentralbank (EZB). Der EU-Vertrag charakterisiert die Leitplanken der Wirtschafts- und Währungsunion (WWU) im Spannungsfeld der Art. 119, 123 und 125 des Vertrags über die Arbeitsweise der Europäischen Union (AEUV). Mithin liegt die wirtschaftspolitische Souveränität – nach dem Prinzip Haftung und Kontrolle – allein bei den Mitgliedstaaten. Die Organe der Europäischen Union (EU) sowie der Gerichtshof der Europäischen Union (EuGH) legen diese Leitplanken gemäß dem Leitgedanken in Art. 1 des Vertrags über die Europäische Union (EUV) einer „ever closer union“ regelmäßig mit weitem Ermessen aus.
Some widely used optical measurement systems require a scan in wavelength or in one spatial dimension to measure the topography in all three dimensions. Novel hyperspectral sensors based on an extended Bayer pattern have a high potential to solve this issue as they can measure three dimensions in a single shot. This paper presents a detailed examination of a hyperspectral sensor including a description of the measurement setup. The evaluated sensor (Ximea MQ022HG-IM-SM5X5-NIR) offers 25 channels based on Fabry–Pérot filters. The setup illuminates the sensor with discrete wavelengths under a specified angle of incidence. This allows characterization of the spatial and angular response of every channel of each macropixel of the tested sensor on the illumination. The results of the characterization form the basis for a spectral reconstruction of the signal, which is essential to obtain an accurate spectral image. It turned out that irregularities of the signal response for the individual filters are present across the whole sensor.
Here, the effects of substituting portions of fossil-based phenol in phenol formaldehyde resin by renewable lignin from two different sources are investigated using a factorial screening experimental design. Among the resins consumed by the wood-based industry, phenolics are one of the most important types used for impregnation, coating or gluing purposes. They are prepared by condensing phenol with formaldehyde (PF). One major use of PF is as matrix polymer for decorative laminates in exterior cladding and wet-room applications. Important requirements for such PFs are favorable flow properties (low viscosity), rapid curing behavior (high reactivity) and sufficient self-adhesion capacity (high residual curing potential). Partially substituting phenol in PF with bio-based phenolic co-reagents like lignin modifies the physicochemical properties of the resulting resin. In this study, phenol-formaldehyde formulations were synthesized where either 30% or 50% (in weight) of the phenol monomer were substituted by either sodium lignosulfonate or Kraft lignin. The effect of modifying the lignin material by phenolation before incorporation into the resin synthesis was also investigated. The resins so obtained were characterized by Fourier Transform Infra-Red (FTIR) spectroscopy, Size Exclusion Chromatography (SEC), Differential Scanning Calorimetry (DSC), rheology, and measurements of contact angle and surface tension using the Wilhelmy plate method and drop shape analysis.
Improvement of a three-layered in vitro skin model for topical application of irritating substances
(2020)
In the field of skin tissue engineering, the development of physiologically relevant in vitro skin models comprising all skin layers, namely epidermis, dermis, and subcutis, is a great challenge. Increasing regulatory requirements and the ban on animal experiments for substance testing demand the development of reliable and in vivo-like test systems, which enable high-throughput screening of substances. However, the reproducibility and applicability of in vitro testing has so far been insufficient due to fibroblast-mediated contraction. To overcome this pitfall, an advanced 3-layered skin model was developed. While the epidermis of standard skin models showed an 80% contraction, the initial epidermal area of our advanced skin models was maintained. The improved barrier function of the advanced models was quantified by an indirect barrier function test and a permeability assay. Histochemical and immunofluorescence staining of the advanced model showed well-defined epidermal layers, a dermal part with distributed human dermal fibroblasts and a subcutis with round-shaped adipocytes. The successful response of these advanced 3-layered models for skin irritation testing demonstrated the suitability as an in vitro model for these clinical tests: only the advanced model classified irritative and non-irritative substances correctly. These results indicate that the advanced set up of the 3-layered in vitro skin model maintains skin barrier function and therefore makes them more suitable for irritation testing.
Impregnated paper-based decorative laminates prepared from lignin-substituted phenolic resins
(2020)
High Pressure Laminates (HPL) panels consist of stacks of self-gluing paper sheets soaked with phenol-formaldehyde (PF) resins. An important requirement for such PFs is that they must rapidly penetrate and saturate the paper pores. Partially substituting phenol with bio-based phenolic chemicals like lignin changes the physico-chemical properties of the resin and affects its ability to penetrate the paper. In this study, PF formulations containing different proportions of lignosulfonate and kraft lignin were used to prepare paper-based laminates. The penetration of a Kraft paper sheet was characterized by a recently introduced, new device measuring the conductivity between both sides of the paper sheet after a drop of resin was placed on the surface and allowed to penetrate the sheet. The main target value measured was the time required for a specific resin to completely penetrate the defined paper sample (“penetration time”). This penetration time generally depends on the molecular weight distribution, the flow behavior and the polarity of the resin which in turn are dependent on the manufacturing conditions of the resin. In the present study, the influences of the three process factors: (1) type of lignin material used for substitution, (2) lignin modification by phenolation and (3) degree of phenol substitution on the penetration times of various lignin-phenolic hybrid impregnation resins were studied using a complete twolevel three-factorial experimental design. Thin laminates made with the resins diluted in methanol were mechanically tested in terms of tensile and flexural strains, and their cross-sections were studied by light microscopy.
Here, we report the continuous peroxide-initiated grafting of vinyltrimethoxysilane (VTMS) onto a standard polyolefin by means of reactive extrusion to produce a functionalized liquid ethylene propylene copolymer (EPM). The effects of the process parameters governing the grafting reaction and their synergistic interactions are identified, quantified and used in a mathematical model of the extrusion process. As process variables the VTMS and peroxide concentrations and the extruder temperature setting were systematically studied for their influence on the grafting and the relative grafting degree using a face-centered central composite design (FCD). The grafting degree was quantified by 1H NMR spectroscopy. Response surface methodology (RSM) was used to calculate the most efficient grafting process in terms of chemical usage and graft yield. With the defined processing window, it was possible to make precise predictions about the grafting degree with at the same time highest possible relative degree of grafting.
This book presents an empirical investigation of the efforts that multinational pharmaceutical companies take in order to find a business model that allows for a profitable access to the Bottom of the Pyramid (BoP) markets. The Bottom of the Pyramid in Africa is frequently mentioned as an attractive market due to its sheer size. Yet most companies struggle to access it because of the low price level, difficult physical market access and challenges when it comes to payment.
More specifically, the book investigates the following business model-related questions: Do pharmaceutical companies provide products that meet the needs of the BoP? What characterizes the value generation of the company? What revenue model leads to a profitable business, and what role does a network of partners play in the business model?
Findings reveal that there is no ‘one-size-fits-all’ answer to these questions. Providing continuous availability, affordability at a good quality of goods and services, creating health awareness, as well as localizing business to achieve a level of inclusivenessare essential prerequisites for success. In the last chapter this book provides a business model prototype that accounts for these key success factors for business at the Bottom of the Pyramid and points to further research topics.
Für den Unternehmer wichtig ist, binnen welcher Fristen er als Käufer seine Rechte bei Sachmängeln geltend machen muss. Ist der Unternehmer Verkäufer, kann er sich erst nach Verjährungsvollendung endgültig zurücklehnen und sicher sein, dass keine Gewährleistungsansprüche gegen ihn mehr geltend gemacht werden können. Im nationalen Rechtsverkehr hat man sich auf Verkäufer- und Käuferseite mittlerweile an die zweijährige Regelfrist im BGB gewöhnt. Welche Fristen im Auslandsgeschäft gelten, ist dagegen oft unklar, weil sich die nationalen Verjährungsfristen oft unterscheiden: Allein in Europa gibt es bei der kaufrechtlichen Gewährleistung Verjährungsfristen zwischen sechs Monaten und sechs Jahren.
Bone tissue is highly vascularized. The crosstalk of vascular and osteogenic cells is not only responsible for the formation of the strongly divergent tissue types but also for their physiological maintenance and repair. Extrusion-based bioprinting presents a promising fabrication method for bone replacement. It allows for the production of large-volume constructs, which can be tailored to individual tissue defect geometries. In this study, we used the all-gelatin-based toolbox of methacryl-modified gelatin (GM), non-modified gelatin (G) and acetylated GM (GMA) to tailor both the properties of the bioink towards improved printability, and the properties of the crosslinked hydrogel towards enhanced support of vascular network formation by simple blending. The vasculogenic behavior of human dermal microvascular endothelial cells (HDMECs) and human adipose-derived stem cells (ASCs) was evaluated in the different hydrogel formulations for 14 days. Co-culture constructs including a vascular component and an osteogenic component (i.e. a bone bioink based on GM, hydroxyapatite and ASCs) were fabricated via extrusion-based bioprinting. Bioprinted co-culture constructs exhibited functional tissue-specific cells whose interplay positively affected the formation and maintenance of vascular-like structures. The setup further enabled the deposition of bone matrix associated proteins like collagen type I, fibronectin and alkaline phosphatase within the 30-day culture.
Azide-bearing cell-derived extracellular matrices (“clickECMs”) have emerged as a highly exciting new class of biomaterials. They conserve substantial characteristics of the natural extracellular matrix (ECM) and offer simultaneously small abiotic functional groups that enable bioorthogonal bioconjugation reactions. Despite their attractiveness, investigation of their biomolecular composition is very challenging due to the insoluble and highly complex nature of cell-derived matrices (CDMs). Yet, thorough qualitative and quantitative analysis of the overall material composition, organisation, localisation, and distribution of typical ECM-specific biomolecules is essential for consistent advancement of CDMs and the understanding of the prospective functions of the developed biomaterial. In this study, we evaluated frequently used methods for the analysis of complex CDMs. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and (immune)histochemical staining methods in combination with several microscopic techniques were found to be highly eligible. Commercially available colorimetric protein assays turned out to deliver inaccurate information on CDMs. In contrast, we determined the nitrogen content of CDMs by elementary analysis and converted it into total protein content using conversion factors which were calculated from matching amino acid compositions. The amount of insoluble collagens was assessed based on the hydroxyproline content. The Sircol™ assay was identified as a suitable method to quantify soluble collagens while the Blyscan™ assay was found to be well-suited for the quantification of sulphated glycosaminoglycans (sGAGs). Eventually, we propose a series of suitable methods to reliably characterise the biomolecular composition of fibroblast-derived clickECM.
The promise of the EVs is twofold. First, rejuvenating a transport sector that still heavily depends on fossil fuels and second, integrating intermittent renewable energies into the power mix. However, it is still not clear how electricity networks will cope with the predicted increase in EVs and their charging demand, especially in combination with conventional energy demand. This paper proposes a methodology which allows to predict the impact of EV charging behavior on the electricity grid. Moreover, this model simulates the driving and charging behavior of heterogeneous EV drivers which differ in their mobility pattern, decision-making heuristics and charging strategies. The simulations show that uncoordinated charging results in charging load clustering. In contrast, decentralized coordination allows to fill the valleys of the conventional load curve and to integrate EVs without the need of a costly expansion of the electricity grid.
Machine learning (ML) techniques are rapidly evolving, both in academia and practice. However, enterprises show different maturity levels in successfully implementing ML techniques. Thus, we review the state of adoption of ML in enterprises. We find that ML technologies are being increasingly adopted in enterprises, but that small and medium-size enterprises (SME) are struggling with the introduction in comparison to larger enterprises. In order to identify enablers and success factors we conduct a qualitative empirical study with 18 companies in different industries. The results show that especially SME fail to apply ML technologies due to insufficient ML knowhow. However, partners and appropriate tools can compensate this lack of resources. We discuss approaches to bridge the gap for SME.
The extracellular matrix (ECM) naturally surrounds cells in humans, and therefore represents the ideal biomaterial for tissue engineering. ECM from different tissues exhibit different composition and physical characteristics. Thus, ECM provides not only physical support but also contains crucial biochemical signals that influence cell adhesion, morphology, proliferation and differentiation. Next to native ECM from mature tissue, ECM can also be obtained from the in vitro culture of cells. In this study, we aimed to highlight the supporting effect of cell-derived- ECM (cdECM) on adipogenic differentiation. ASCs were seeded on top of cdECM from ASCs (scdECM) or pre-adipocytes (acdECM). The impact of ECM on cellular activity was determined by LDH assay, WST I assay and BrdU assay. A supporting effect of cdECM substrates on adipogenic differentiation was determined by oil red O staining and subsequent quantification. Results revealed no effect of cdECM substrates on cellular activity. Regarding adipogenic differentiation a supporting effect of cdECM substrates was obtained compared to control. With these results, we confirm cdECM as a promising biomaterial for adipose tissue engineering.
The generous feed-in tariffs (FiTs) introduced in Germany—which resulted in major growth in decentralized solar photovoltaic (PV) systems—will phase out in the coming years, making many of the existing distributed generation assets stranded. This challenge creates an opportunity for community-focused energy utilities, such as Elektrizitätswerke Schönau eG (EWS) based in Schönau, Germany, to try a new approach to assist its customers, makes the transition to a more sustainable future. This chapter describes how EWS is developing products and offering community-based solutions including peer-to-peer trading using automated platforms. Such innovative offering may lead to successful differentiation in a competitive and highly decentralized future.
Public transport maps are typically designed in a way to support route finding tasks for passengers while they also provide an overview about stations, metro lines, and city-specific attractions. Most of those maps are designed as a static representation, maybe placed in a metro station or printed in a travel guide. In this paper we describe a dynamic, interactive public transport map visualization enhanced by additional views for the dynamic passenger data on different levels of temporal granularity. Moreover, we also allow extra statistical information in form of density plots, calendar-based visualizations, and line graphs. All this information is linked to the contextual metro map to give a viewer insights into the relations between time points and typical routes taken by the passengers. We illustrate the usefulness of our interactive visualization by applying it to the railway system of Hamburg in Germany while also taking into account the extra passenger data. As another indication for the usefulness of the interactively enhanced metro maps we conducted a user experiment with 20 participants.
JumpAR kombiniert die Welt der Augmented Reality (AR) mit dem weltbekannten Jump ’n’ Run Genre in einem Mobile Game. Der Spieler kreiert einen individuellen Spielparcours in seiner realen Umgebung und navigiert seine Spielfigur auf virtuellen Plattformen durch diesen. Der mit Unity entwickelte JumpAR Prototyp wurde nach Umsetzungen der Grundfunktionen und Mechaniken im Rahmen eines Nutzertests analysiert. Die Integration von echten Gegenständen aus dem Umfeld des Spielers führt im Spielfluss zu einer starken Verknüpfung der virtuellen und realen Welt, was eine neue AR-Interaktionsform für Handyspiele darstellt.
Systemische Betrachtung des therapeutischen Roboters Paro im Vergleich zu dem Haustierroboter AIBO
(2020)
Roboter sind in der heutigen Zeit nicht nur in der Industrie zu finden, sondern werden immer häufiger in privaten Lebensbereichen eingesetzt. Ein Beispiel hierfür ist der soziale Therapie-Roboter Paro. Dieser ist dem Verhalten und Aussehen einer jungen Robbe nachempfunden, drückt Gefühle aus und wird besonders in Pflegeheimen eingesetzt. Dabei zeigt er positive Auswirkungen auf das Wohlbefinden pflegebedürftiger Menschen. Diese Arbeit stellt den Roboter Paro in einer systemischen Analyse dar: hierbei werden Systemkontext, Anwendungsfälle, Anforderungen und Struktur betrachtet. Anschließend erfolgt eine Analyse des Haustierroboters AIBO, welcher einem Welpen ähnelt und verstärkt der Unterhaltung von Privatpersonen dient. Es werden Gemeinsamkeiten und Unterschiede zwischen den Systemen herausgearbeitet. Dabei wird ersichtlich, dass beide Systeme dem Nutzer vorrangig Gesellschaft leisten, jedoch verschiedene Anforderungen besitzen und in unterschiedlichen Anwendungsdomänen eingesetzt werden. Zudem besitzt AIBO vielfältigere Fähigkeiten und einen höheren Bewegungsgrad als Paro. Dies spiegelt sich in einer komplexeren Struktur der Hardware wider.
A methodology for designing planar spiral antennas with a feeding network embedded within a dielectric is presented. To avoid a purely academic work which may not be manufactured with available standard technologies, the approach takes into account manufacturing process requirements by choice of used materials in the simulation. General design rules are provided. They encompass amongst others, selection criteria for dielectric material, aspects to consider when sketching the radiating element design, as well as those for the implementation of the feeding network. A rule of thumb, which maybe helpful in the determination of the antenna supporting substrate’s height, has been found. The appeal of the method resides in the fact that it eases up the design process and helps to minimize errors, saving time and money. The approach also enables the design of a compact and small-size spiral antenna as antenna-in-package (AiP), and provides the opportunity to assemble the antenna with other RF components/systems on the same layer stack or on the same integration platform.
Die rasante Entwicklung der Sensortechnik im Endverbraucherbereich lässt einen klinischen Nutzen der verfügbaren dezentral erhobenen Daten aus dem Patientenalltag zur Überwachung des individuellen Gesundheitszustands vermuten. Zur Überprüfung dieser Vermutung ist die Bereitstellung einer entsprechenden Plattform in den klinischen Alltag erforderlich. Hierzu wird die bwHealthApp entwickelt, mit der sowohl die aktuelle Bandbreite als auch die Evolution der Sensortechnik auf die klinische Anwendung abbildbar ist. Mit dem flexiblen Entwurf lässt sich der klinische Nutzen für die personalisierte Medizin evaluieren. Außerdem bietet die bwHealthApp einen an Machbarkeit orientierten Diskussionsbeitrag zu offenen rechtlichen, regulatorischen und ethischen Fragestellungen der Digitalisierung in der Medizin in Deutschland.
The livestock sector is growing steadily and is responsible for around 18% of global greenhouse‐gas‐emissions, which is more than the global transport sec-tor (Steinfeld et al. 2006). This paper examines the potential of social marketing to reduce meat consumption. The aim is to understand consumers’ motivation in diet choices and to learn what opportunities social marketing can provide to counteract negative environmental and health trends. The authors believe that research to answer this question should start in metropolitan areas, be-cause measures should be especially effective there. Based on the Theory of Planned Behaviour (TPB, Ajzen 1991) and the Technology‐Acceptance‐Model by Huijts et al. (2012), an online‐study with participants from the metropolitan region (n = 708) was conducted in which central socio‐psychological constructs for a meat consumption reduction were examined. It was shown that attitude, personal norm and habit have a critical influence on the intention to reduce meat consumption. A segmentation of consumers based on these factors led to three consumer clusters: vegetarians/flexitarians, potential flexitarians and convinced meat eaters. Potential flexitarians are an especially relevant target group for the development of social‐marketing‐measures to reduce meat consumption. In co‐creation‐workshops with potential flexitarians from the metropolitan region, barriers and benefits of reducing meat consumption were identified. The factors of environmental protection, animal welfare and desire for variety turn out to be the most relevant motivational factors. Based on these factors, consumers proposed a variety of social marketing measures, such as applications and labels to inform about the environmental impact of meat products.
Wie kann die Digitalisierung in der Bauzulieferbranche erfolgreich gemeistert werden? Die Fülle und Komplexität der Fragen dazu lassen sich auf zwei zentrale Kernfragen reduzieren: Was sind die richtigen Inhalte und wesentlichen Werttreiber der Digitalisierung? Und wie muss zukünftig mit der steigenden Informationsflut, der rasant wachsenden Komplexität und der abnehmenden Planbarkeit umgegangen werden?
In diesem Beitrag wird ein Framework vorgestellt, das Bauzulieferern hilft, ihr digitales Zielbild mit seinen Werttreibern systematisch aus dem Kundennutzen abzuleiten. Das Framework berücksichtigt die Besonderheiten der Bauzulieferindustrie, kann aber mit leichten Anpassungen auch auf andere Branchen angewendet werden. Aufbauend auf dem Zielbild können Unternehmen definieren, welche technischen, personellen und organisatorischen Veränderungen für dessen Umsetzung erforderlich sind. Um flexibel mit den dynamischen Veränderungen in ihrem Ökosystem und kulturellen Herausforderungen umgehen zu können, werden zudem fünf Einflussgrößen identifiziert, die Unternehmen bei der Entwicklung der dafür benötigten Evolutionskompetenz berücksichtigen müssen.
In diesem Beitrag wird ein neuer Ansatz vorgestellt, welcher eine schwerkraftreduzierte Navigation innerhalb einer VR-Umgebung erlaubt, wie beispielsweise ein simulierter Mondspaziergang. Zur Navigation in der VR-Umgebung wird der Cyberith Virtualizer ein-gesetzt. Die Schwerkraftsimulation erfolgt mittels eines einstellbaren Gurtsystems, das anelastischen Seilen aufgehängt wird und abgestufte Schwerkraftkompensationen erlaubt. Als Umgebung wurde ein Raumschiffszenario sowie eine Mondoberfläche generiert. Hier sind in der aktuellen Anwendung einfache Interaktionen möglich. In Anlehnung an existierende Gravity Offload Systeme wird die Lösung ViRGOS bezeichnet. ViRGOS wurde bereits bei verschiedenen Besuchsterminen und Hochschulevents eingesetzt, so dass erste Rückmeldungen von Nutzern eingeholt werden konnten.
Here, we report the mechanical and water sorption properties of a green composite based on Typha latifolia fibres. The composite was prepared either completely binder-less or bonded with 10% (w/w) of a bio-based resin which was a mixture of an epoxidized linseed oil and a tall-oil based polyamide. The flexural modulus of elasticity, the flexural strength and the water absorption of hot pressed Typha panels were measured and the influence of pressing time and panel density on these properties was investigated. The cure kinetics of the biobased resin was analyzed by differential scanning calorimetry (DSC) in combination with the iso-conversional kinetic analysis method of Vyazovkin to derive the curing conditions required for achieving completely cured resin. For the binderless Typha panels the best technological properties were achieved for panels with high density. By adding 10% of the binder resin the flexural strength and especially the water absorption were improved significantly.
In recent years, the development and application of decellularized extracellular matrices (ECMs) for use as biomaterials have grown rapidly. These cell-derived matrices (CDMs) represent highly bioactive and biocompatible materials consisting of a complex assembly of biomolecules. Even though CDMs mimic the natural microenvironment of cells in vivo very closely, they still lack specifically addressable functional groups, which are often required to tailor a biomaterial functionality by bioconjugation. To overcome this limitation, metabolic glycoengineering has emerged as a powerful tool to equip CDMs with chemical groups such as azides. These small chemical handles are known for their ability to undergo bioorthogonal click reactions, which represent a desirable reaction type for bioconjugation. However, ECM insolubility makes its processing very challenging. In this contribution, we isolated both the unmodified ECM and azide-modified clickECM by osmotic lysis. In a first step, these matrices were concentrated to remove excessive water from the decellularization step. Next, the hydrogel-like ECM and clickECM films were mechanically fragmentized, resulting in easy to pipette suspensions with fragment sizes ranging from 7.62 to 31.29 μm (as indicated by the mean d90 and d10 values). The biomolecular composition was not impaired as proven by immunohistochemistry. The suspensions were used for the reproducible generation of surface coatings, which proved to be homogeneous in terms of ECM fragment sizes and coating thicknesses (the mean coating thickness was found to be 33.2 ± 7.3 μm). Furthermore, they were stable against fluid-mechanical abrasion in a laminar flow cell. When primary human fibroblasts were cultured on the coated substrates, an increased bioactivity was observed. By conjugating the azides within the clickECM coatings with alkyne-coupled biotin molecules, a bioconjugation platform was obtained, where the biotin–streptavidin interaction could be used. Its applicability was demonstrated by equipping the bioactive clickECM coatings with horseradish peroxidase as a model enzyme.
Today's pattern making methods for industrial purposes are including construction principles, which are based on mathematical formula and sizing charts. As a result, there are two-dimensional flats, which can be converted into a three-dimensional garment. Because of their high linearity, those patterns are incapable of recreating the complexity of the human body, which results in insufficient fit. Subsequent changes of the pattern require a high degree of experience and lead to an inefficient product development process. It is known that draping allows the development of more complex and demanding patterns, which corresponds more to the actual body shape. Therefore, this method is used in custom tailoring and haute couture to achieve perfect garment fit but is also associated with time.
So, there is the act of defiance to improve the fit of garments, to speed up production but maintain a good value for money. Reutlingen University is therefore working on the development of 3D-modelled body shapes for 3D draping, considering different layers of clothing, such as jackets or coats. For this purpose, 3D modelling is used to develop 3D-bodies that correspond to the finished dimensions of the garment. By flattening of the modelled body, it is then possible to obtain an optimal 2D Pattern of the body. The comparison of the conventional method and the developed method is done by 3D simulation.
Finally, the optical fit test is demonstrated by the simulated basic cuts, that a significantly better body wrapping through the newly developed methodology could be achieved. Unlike in the basic cuts, which were achieved by classical design principles have been created, only a few adjustments are necessary to obtain an optimized basic cut. Also, when considering the body distance, it is shown that the newly developed basic patterns provide a more even enclosure of the body.
The process for the production of customized bras is really challenging. Although the need is very clear, the lingerie industry is currently facing a lack of data, knowledge and expertise for the realization of an automated process chain. Different studies and surveys have shown, that the majority of women wear the incorrect bra size. In addition to aesthetic problems, health risks such as headaches, back problems or digestive problems of the wearers can result from this. An important prerequisite for improvements is the basic knowledge about the female breast, both in terms of body measurements and different breast shapes. The current size systematic for bras only defines a bra size by the relation between bust girth and underbust girth and standardized cup forms do not justice to the high variability of the human body. As the bra type shapes the female breast, basic knowledge about the relation of measurements and shapes from the clothed and the unclothed breast is missing.
In the present project, studies are conducted to explore the female breast and to derive new breast-specific body measurements, different breast shapes and deformation knowledge using existing bras.
Furthermore, an innovative process is being developed that leads from 3D scanning to individual and interactive pattern construction, which allows an automatic pattern creation based on individual body measurements and the influence of different material parameters.
In the course of the presentation, the current project status will be shown and the future developments and project steps will be introduced.
Im Gegensatz etwa zur klassischen Werbung handelt es sich beim Event-Marketing um ein dynamisches Kommunikationsinstrument, das laufend Trends und Neuerungen mit sich bringt. Die vielfältigen Einsatzmöglichkeiten und Potenziale des Event-Marketing ermöglichen es, entsprechend dem momentanen Zeitgeist relevante Zielgruppen zu erreichen, markenrelevante Wirklichkeiten und Erlebniswelten zu generieren, Emotionen und Sympathiewerte zu erzeugen und auf diese Weise eine Bindung zwischen Marke bzw. Unternehmen und Rezipienten herzustellen.
Zielgenau aus dem Hinterhalt
(2020)
Ambush-Marketing löst meistens heftige Reaktionen aus - bei Befürwortern und Gegnern. Die Idee des Ambush-Marketings ist es, von den Erfolgen des Sponsorings zu profitieren, ohne die Pflichten eines offiziellen Sponsors einzugehen. Ambusher besitzen keine Vermarktungsrechte an einer Veranstaltung, bauen aber dennoch durch ihre Marketingmassnahmen eine Verbindung zu einem Event auf. Der Grat zwischen der Verletzung von Sponsoren-Rechten und kreativ-innovativer Kommunikationspolitik ist dabei oft sehr schmal.
Gibt es einen Kauf-Knopf im Gehirn des Konsumenten? Und wenn ja, wie betätigt man diesen? Die Antworten auf diese Fragen könnte das Neuromarketing liefern. Das Neuromarketing ist Bestandteil der Neuroökonomie und eine relativ junge Disziplin an der Schnittstelle von Kognitionswissenschaften, Neurowissenschaften und der Marktforschung. Durch den technologischen Fortschritt können die Neurowissenschaften wichtige Erkenntnisse für das Marketing liefern, insbesondere Einblicke zur Erklärung des Konsumentenverhaltens. Durch den Blick in das Kundengehirn können beispielsweise Handelsunternehmen ihre Kunden gezielter ansprechen und sich so einen Vorteil gegenüber Konkurrenten verschaffen.
This article studies the current debate on Coronabonds and the idea of European public debt in the aftermath of the Corona pandemic. According to the EU-Treaty economic and fiscal policy remains in the sovereignty of Member States. Therefore, joint European debt instruments are risky and trigger moral hazard and free-riding in the Eurozone. We exhibit that a mixture of the principle of liability and control impairs the present fiscal architecture and destabilizes the Eurozone. We recommend that Member States ought to utilize either the existing fiscal architecture available or establish a political union with full sovereignty in Europe. This policy conclusion is supported by the PSPP-judgement of the Federal Constitutional Court of Germany on 5 May 2020. This ruling initiated a lively debate about the future of the Eurozone and Europe in general.
Purpose: Despite growing interest in the intersection of supply chain management (SCM) and management accounting (MA) in the academic debate, there is a lack of understanding regarding both the content and the delimitation of this topic. As of today, no common conceptualization of supply chain management accounting (SCMA) exists. The purpose of this study is to provide an overview of the research foci of SCMA in the scholarly debate of the past two decades. Additionally, it analyzes whether and to what extent the academic discourse of MA in SCs has already found its way into both SCM and MA higher education, respectively.
Design/methodology/approach: A content analysis is conducted including 114 higher education textbooks written in English or in German language.
Findings: The study finds that SC-specific concepts of MA are seldom covered in current textbooks of both disciplines. The authors conclude that although there is an extensive body of scholarly research about SCMA concepts, there is a significant discrepancy with what is taught in higher education textbooks.
Practical implications: There is a large discrepancy between the extensive knowledge available in scholarly research and what we teach in both disciplines. This implies that graduates of both disciplines lack important knowledge and skills in controlling and accounting for SCs. To bring about the necessary change, MA and SCM in higher education must be more integrative.
Originality/value: To the best of the authors knowledge, this study is first of its kind comprising a large textbook sample in both English and German languages. It is the first substantiated assessment of the current state of integration between SCM and MA in higher education.
In Germany, mobility is currently in a state of flux. Since June 2019, electric kick scooters (e-scooters) have been permitted on the roads, and this market is booming. This study employs a user survey to generate new data, supplemented by expert interviews to determine whether such e-scooters are a climate-friendly means of transport. The environmental impacts are quantified using a life cycle assessment. This results in a very accurate picture of e-scooters in Germany. The global warming potential of an e-scooter calculated in this study is 165 g CO2-eq./km, mostly due to material and production (that together account for 73% of the impact). By switching to e-scooters where the battery is swapped, the global warming potential can be reduced by 12%. The lowest value of 46 g CO2-eq./km is reached if all possibilities are exploited and the life span of e-scooters is increased to 15 months. Comparing these emissions with those of the replaced modal split, e-scooters are at best 8% above the modal split value of 39 g CO2-eq./km.
In this work, a brushless, harmonic-excited wound-rotor synchronous machine is investigated which utilizes special stator and rotor windings. The windings magnetically decouple the fundamental torque-producing field from the harmonic field required for the inductive power transfer to the field coil. In contrast to conventional harmonic-excited synchronous machines, the whole winding is utilized for both torque production and harmonic excitation such that no additional copper for auxiliary windings is needed. Different rotor topologies using rotating power electronic components are investigated and their efficiencies have been compared based on Finite-Element calculation and circuit analysis.
Energy efficient electric control of drives is more and more important for electric mobility and manufacturing industries. Online dynamic optimization of induction machines is challenging due to the computational complexity involved and the variable power losses during dynamic operation of induction machines. This paper proposes a simple technique for sub-optimal online loss optimization using rotor flux linkage templates for energy efficient dynamic operation of induction machines. Such a rotor flux linkage template is given by a rotor flux linkage trajectory which is optimal for a specific scenario. This template is calculated in an offline optimization process. For a specific scenario during real time operation the rotor flux linkage is calculated by appropriately scaling the given template.
Steady state efficiency optimization techniques for induction motors are state of the art and various methods have already been developed. This paper provides new insights in the efficiency optimized operation in dynamic regime. The paper proposes an anticipative flux modification in order to decrease losses during torque and speed transients. These trajectories are analyzed based on a numerical study for different motors. Measurement results for one motor are given as well.
Motto der Herbstkonferenz Informatics Inside 2020 ist KInside. Wieder einmal blicken Studierende inside und schauen sich Methoden, Anwendungen und Zusammenhänge genauer an. Die Beiträge sind vielfältig und entsprechend dem Studiengang human-centered. Es ist der Anspruch, dass sich die Themen um die Bedürfnisse der Menschen drehen und eingesetzte Methoden kein Selbstzweck sind, sondern am Nutzen für den Menschen gemessen werden.
Innovationskraft ist einer der wesentlichen Erfolgsfaktoren der Zukunft, welcher den Unterschied zwischen erfolgreichen und scheiternden Unternehmen in hohem Maße beeinflussen wird (PWC, 2015). Besonders junge Unternehmen und Start-ups sind für ihre hohe Innovationsfähigkeit bekannt. Etablierte Unternehmen hingegen punkten weniger mit neuen Ideen, aber dafür mit innovationskritischen Ressourcen, Routinen und Skaleneffekten. Ein stetig an Popularität gewinnender Ansatz, die Fähigkeiten und Ressourcen von etablierten Unternehmen mit der Innovationskraft von Start-ups zu verknüpfen, stellt das "Intrapreneurship" dar.
Das Value-Engineering in der Kundenkommunikation ist eine strukturierte Methode, Kommunikationsprozesse zwischen Unternehmen zu verbessern. Das Konzept greift bewährte Elemente der technischen Wertanalyse und der Gemeinkosten-Wertanalyse auf und überträgt sie auf die Kundenkommunikation. Der Ansatz bietet eine systematische Vorgehensweise, Kommunikationsprozesse zwischen Anbieter und Kunde zu durchleuchten und neu zu gestalten. Value-Engineering in der Kundenkommunikation schafft somit Wettbewerbsvorteile durch eine Optimierung der Kommunikation.
Dieser Beitrag gibt einen Überblick über die verschiedenen Möglichkeiten der Bilanzierung einens Initial Coin Offerings (ICO) beim Emittenten auf der Passivseite nach den Regelungen der IFRS. Ziel ist es, die bilanzielle Einordnung anhand verschiedenenr Arten von Token zu erörtern und den Emittenten bei der Ausgestaltung der Token sowie der anschließenden Bilanzierung zu unterstützen. Die Ergebnisse zeigen, dass die Standards für die bilanzielle Einordnung von ICO-Token zwar ausreichen, allerdings eine große Bandbreite der Bilanzierung zu berücksichtigen ist und eine detaillierte Regelung durch einen eigenen IFRS daher schwierig erscheint.
Customer orientation should be the core engine of every organisation while IT can be considered as the enabler to generate competitive advantages along customer processes in marketing, sales and service. Research shows that customer relationship management (CRM) enables organisations to perform better and experience indicates that organisations that focus on customer orientation are more successful. With marketplace organisations such as Amazon, Alibaba or Conrad shaping the future of customer centricity and information technology, German B2B organisations need to shift their value contribution from product-centric to customer-centric. While these organisations are currently attempting to implement CRM software and putting their customers more into focus, the question remains how organisations are approaching the implementation of CRM and whether these attempts are paying off in terms of business performance.
Here, we study resin cure and network formation of solid melamine formaldehyde pre-polymer over a large temperature range viadynamic temperature curing profiles. Real-time infrared spectroscopy is used to analyze the chemical changes during network formation and network hardening. By applying chemometrics (multivariate curve resolution,MCR), the essential chemical functionalities that constitute the network at a given stage of curing are mathematically extracted and tracked over time. The three spectral components identified by MCR were methylol-rich, ether linkages-rich and methylene linkages-rich resin entities. Based on dynamic changes of their characteristic spectral patterns in dependence of temperature, curing is divided into five phases: (I) stationary phase with free methylols as main chemical feature, (II) formation of flexible network cross-linked by ether linkages, (III) formation of rigid, ether-cross-linked network, (IV) further hardening via transformation of methylols and ethers into methylene-cross-linkages, and (V) network consolidation via transformation of ether into methylene bridges. The presented spectroscopic/chemometric approach can be used as methodological basis for the functionality design of MF-based surface films at the stage of laminate pressing, i.e., for tailoring the technological property profile of cured MF films using a causal understanding of the underlying chemistry based on molecular markers and spectroscopic fingerprints.