620 Ingenieurwissenschaften und Maschinenbau
Refine
Document Type
- Book chapter (17) (remove)
Is part of the Bibliography
- yes (17)
Institute
- Technik (13)
- Life Sciences (2)
- Informatik (1)
- Texoversum (1)
Publisher
We discuss the fabrication technologies for IC chips in this chapter. We will focus on the main process steps and especially on those aspects that are of particular importance for understanding how they affect, and in some cases drive, the layout of ICs. All our analyses in this chapter will be for silicon as the base material; the principles and understanding gained can be applied to other substrates as well. Following a brief introduction to the fundamentals of IC fabrication (Sect. 2.1) and the base material used in it, namely silicon (Sect. 2.2), we discuss the photolithography process deployed for all structuring work in Sect. 2.3. We will then present in Sect. 2.4 some theoretical opening remarks on typical phenomena encountered in IC fabrication. Knowledge of these phenomena is very useful for understanding the process steps we cover in Sects. 2.5–2.8. We examine a simple exemplar process in Sect. 2.9 and observe how a field-effect transistor (FET) – the most important device in modern integrated circuits—is created. To drive the key points home, we provide a review of each topic at the end of every section from the point of view of layout design by discussing relevant physical design aspects.
Broad acceptance of finite-element-based analysis of structural problems and the increased availability of CAD-systems for structural tasks, which help to generate meshes of non-trivial geometries, have been setting a standard for the evaluation of designs in mechanical engineering in the last few decades. The development of automated or semi-automated optimizers, integrated into the Computer-Aided Engineering (CAE)-packages or working as outer loop machines, requiring the solver to do the analysis of the specific designs, has been accepted by most advanced users of the simulation community as well. The availability and inexpensive processing power of computers is increasing without any limitations foreseen in the coming years. There is little doubt that virtual product development will continue using the tools that have proved to be so successful and so easy to handle.
Current fields of interest
(2016)
If we review the research done in the field of optimization, the following topics appear to be the focus of current development:
– Optimization under uncertainties, taking into account the inevitable scatter of parts, external effects and internal properties. Reliability and robustness both have to be taken into account when running optimizations, so the name Robust Design Optimization (RDO) came into use.
– Multi-Objective Optimization (MOO) handles situations in which different participants in the development process are developing in different directions. Typically we think of commercial and engineering aspects, but other constellations have to be looked at as well, such as comfort and performance or price and consumption.
– Process development of the entire design process, including optimization from early stages, might help avoid inefficient efforts. Here the management of virtual development has to be re-designed to fit into a coherent scheme.
...
There are many other fields where interesting progress is being made. We limit our discussion to the first three questions.
To illustrate the power and the pitfalls of Bionic Optimization, we will show some examples spanning classes of applications and employing various strategies. These applications cover a broad range of engineering tasks. Nevertheless, there is no guarantee that our experiences and our examples will be sufficient to deal with all questions and issues in a comprehensive way. As general rule it might be stated, that for each class of problems, novices should begin with a learning phase. So, in this introductory phase, we use simple and quick examples, e.g., using small FE-models, linear load cases, short time intervals and simple material models. Here beginners within the Bionic Optimization community can learn which parameter combinations to use. In Sect. 3.3 we discuss strategies for optimization study acceleration. Making use of these parameters as starting points is one way to set the specific ranges, e.g., number of parents and kids, crossing, mutation radii and, numbers of generations. On the other hand, these trial runs will doubtless indicate that Bionic Optimization needs large numbers of individual designs, and considerable time and computing power. We recommend investing enough time preparing each task in order to avoid the frustration should large jobs fail after long calculation times.
Application to CAE systems
(2016)
Due to the broad acceptance of CAD-systems based on 3D solids, the geometric data of all common CAE (Computer-Aided Engineering) software, at least in mechanical engineering, are based on these solids. We use solid models, where the space filled by material is defined in a simple and easily useable way. Solid models allow for the development of automated meshers that transform solid volumes into finite elements. Even after some unacceptable initial trials, users are able to generate meshes of non-trivial geometries within minutes to hours, instead of days or weeks. Once meshing had no longer been the cost limiting factor of finite element studies, numerical simulation became a tool for smaller industries as well.
Due to the broad acceptance of CAD-systems based on 3D solids , the geometric data of all common CAE (Computer-Aided Engineering) software, at least in mechanical engineering, are based on these solids. We use solid models , where the space filled by material is defined in a simple and easily useable way. Solid models allow for the development of automated meshers that transform solid volumes into finite elements. Even after some unacceptable initial trials, users are able to generate meshes of non-trivial geometries within minutes to hours, instead of days or weeks. Once meshing had no longer been the cost limiting factor of finite element studies, numerical simulation became a tool for smaller industries as well.
In the early days of automated meshing development, there were discussions over the use of tetragonal (Fig. 4.1) or hexagonal based meshes. But, after a short period of time, it became evident, that there were and will always be many problems using automated meshers to generate hexagonal elements . So today nearly all automated 3D-meshing systems use tetragonal elements .
We have seen that bionic optimization can be a powerful tool when applied to problems with non-trivial landscapes of goals and restrictions. This, in turn, led us to a discussion of useful methodologies for applying this optimization to real problems. On the other hand, it must be stated that each optimization is a time consuming process as soon as the problem expands beyond a small number of free parameters related to simple parabolic responses. Bionic optimization is not a quick approach to solving complex questions within short times. In some cases it has the potential to fail entirely, either by sticking to local maxima or by random exploration of the parameter space without finding any promising solutions. The following sections present some remarks on the efficiency and limitations users must be aware of. They aim to increase the knowledge base of using and encountering bionic optimization. But they should not discourage potential users from this promising field of powerful strategies to find good or even the best possible designs.
In this chapter we introduce methods to improve mechanical designs by bionic methods. In most cases we assume that a general idea of the part or system is given by a set of data or parameters. Our task is to modify these free parameters so that a given goal or objective is optimized without violation of any of the existing restrictions.
Motivation
(2016)
Since human beings started to work consciously with their environment, they have tried to improve the world they were living in. Early use of tools, increasing quality of these tools, use of new materials, fabrication of clay pots, and heat treatment of metals: all these were early steps of optimization. But even on lower levels of life than human beings or human society, we find optimization processes. The organization of a herd of buffalos to face their enemies, the coordinated strategies of these enemies to isolate some of the herd’s members, and the organization of bird swarms on their long flights to their winter quarters: all these social interactions are optimized strategies of long learning processes, most of them the result of a kind of collective intelligence acquired during long selection periods.
Wissen schaffen für klimafreundliche Energietechnik : das Erfolgsgeheimnis der Kraft-Wärme-Kopplung
(2017)
Als hocheffiziente Energieerzeugungstechnologie spielt die KWK eine wichtige Rolle bei der Energiewende und dem Klimaschutz. Gerade für den Gebäudebereich und Unternehmen kann die KWK eine wirtschaftliche und umweltschonende Möglichkeit sein, Strom und Wärme zu erzeugen. Für die Planung, Umsetzung und den Betrieb von KWK-Anlagen werden fachkundige Handwerke und Ingenieure gebraucht. Aus diesem Grund hat das Ministerium für Umwelt, Klima und Energiewirtschaft in den Jahren 2015 und 2016 zusammen mit dem Handwerkstag Baden-Württemberg ... den Qualifizierungskurs "Kraft-Wärme-Kopplung - Kompetenz für den Wärme- und Energiemarkt von heute und morgen" durchgeführt... Aufgrund des Erfolges der Seminarreihe wird diese auch 2017 ff. fortgesetzt.
This article covers the design of highly integrated gate drivers and level shifters for high-speed, high power efficiency and dv/dt robustness with focus on automotive applications. With the introduction of the 48 V board net in addition to the conventional 12 V battery, there is an increasing need for fast switching integrated gate drivers in the voltage range of 50 V and above. State-of-the-art drivers are able to switch 50 V in less than 5 ns. The high-voltage electrical drive train demands for galvanic isolated and highly integrated gate drivers. A gate driver with bidirectional signal transmission with a 1 MBit/s amplitude modulation, 10/20 MHz frequency modulation and power transfer over one single transformer will be discussed. The concept of high-voltage charge storing enables an area-efficient fully integrated bootstrapping supply with 70 % less area consumption. EMC is a major concern in automotive. Gate drivers with slope control optimize EMC while maintaining good switching efficiency. A current mode gate driver, which can change its drive current within 10 ns, results in 20 dBuV lower emissions between 7 and 60 MHz and 52 % lower switching loss compared to a conventional constant current gate driver.