Refine
Year of publication
- 2014 (74) (remove)
Document Type
- Conference proceeding (74) (remove)
Is part of the Bibliography
- yes (74)
Institute
- Informatik (31)
- Technik (25)
- ESB Business School (13)
- Life Sciences (4)
- Texoversum (1)
Publisher
Der elektrische Wirkungsgrad stellt eines der wichtigsten Bewertungskriterien für BHKW dar, da über diese Größe ausgedrückt wird, wie viel des Wertproduktes „elektrische Energie“ bezogen auf die eingesetzte oder aufzuwendende Brennstoffenergie produziert werden kann. Ein hoher elektrischer Wirkungsgrad ist somit gleichbedeutend mit hohen Erlösen aus dem Verkauf der erzeugten elektrischen Energie und damit eine grundlegende Voraussetzung für einen wirtschaftlichen Betrieb eines BHKWs. Folglich sind die Hersteller von BHKW bestrebt, den elektrischen Wirkungsgrad ihrer Geräte kontinuierlich zu verbessern und nach oben zu treiben. Dieses Bemühen zeigt sich eindrucksvoll an der Entwicklung der mechanischen Effizienz von Gasmotoren der Firma GE Jenbacher. Während mit Motoren der Baureihe 6 im Leistungsbereich 1,8 – 4,4 MWel im Jahr 1988 eine mechanische Effizienz von 34% erreichbar war, liegt dieser Wert mittlerweile bei etwa 47,5%. Diese enorme Steigerung konnte im Wesentlichen durch eine Erhöhung des mittleren effektiven Zylinderarbeitsdrucks von etwa 10 bar im Jahr 1988 auf derzeit 24 bar erzielt werden. Dabei hilft der Magerbetrieb, der gleichzeitig ein Zurückdrängen der NOx-Emissionen bewirkt, die Klopfgrenze zu höheren Drücken hin zu verschieben. Eine sichere Zündung des Gas-Luft-Gemisches wird durch die Vorkammerzündung erreicht.
Universelle OTA-Testbench
(2014)
Es wird eine universell einsetzbare Testbench zur Simulation von integrierten Schaltungen innerhalb der OTA-Schaltungsklasse (Operational Transconductance Amplifier; Transkonduktanzverstärker) vorgestellt. Transkonduktanzverstärker sind in der analogen Schaltungstechnik weit verbreitet und daher von großer Bedeutung. Sie treten sowohl als eigenständige Schaltungen innerhalb eines Chips, sowie als Bestandteil anderer Schaltungen (z.B. als erste und zweite Stufe von Operationsverstärkern) auf. Es kann davon ausgegangen werden, dass heute kaum ein analoger oder Mixed-Signal-Chip gefertigt wird, in dem keine Transkonduktanzverstärker verbaut sind. Die Entscheidungsfindung des Entwicklers bei der Auslegung eines OTAs beruht maßgeblich auf einer anwendungsspezifischen Simulation. Die Erstellung einer eigenen Testbench für jede Anwendung bedeutet allerdings einen hohen Zeitaufwand und erschwert den Vergleich der Simulationsergebnisse unterschiedlicher Schaltungsvarianten. Durch eine universelle Testbench kann zum einen der Zeitaufwand verringert werden, zum anderen können nun Simulationsergebnisse direkt miteinander verglichen werden. Hierdurch wird die Entscheidungsfindung des Entwicklers objektiviert und beschleunigt. Neben dem Vergleich unterschiedlicher Schaltungen innerhalb einer Technologie ist auch der Vergleich einer Schaltung in unterschiedlichen Technologien denkbar. Die Idee einer universell anwendbaren Testbench lässt sich auch auf andere analoge Schaltungsklassen anwenden und damit als Prinzip verallgemeinern.
Das Ziel dieser Arbeit war die Umsetzung eines Wahrnehmungsensors für Softwareagenten, die über ein virtuelles Menschmodell in einer dreidimensionalen Umgebung agieren. Hierbei sollen die Agenten über den Sensor in der Lage sein, semantische Informationen zu geometrischen Objekten in der Umgebung zu erhalten. Hierfür wurden zwei Verfahren umgesetzt, die das menschliche Sehen simulieren, indem Objekte erkannt werden, wenn diese innerhalb eines Sichtfelds liegen. Ein Problem, das dabei gelöst werden muss, ist die Identifizierung möglicher Verdeckungen der Objekte. Ein Ansatz, dieses Problem zu lösen, ist der Ray-Tracing Ansatz, welcher für das erste Verfahren umgesetzt wurde. Das zweite Verfahren verwendet den Occlusion-Culling Ansatz. Auswertungen beider Verfahren haben gezeigt, dass der Ray-Tracing Ansatz eine schnellere Laufzeit aufweist, der Occlusion-Culling Ansatz jedoch mehr unverdeckte Objekte im Sichtfeld erkennt.
Enterprise Architectures (EA) consists of many architecture elements, which stand in manifold relationships to each other. Therefore Architecture Analysis is important and very difficult for stakeholders. Due changing an architecture element has impacts on other elements different stakeholders are involved. In practice EAs are often analyzed using visualizations. This article aims at contributing to the field of visual analytics in EAM by analyzing how state of-the-art software platforms in EAM support stakeholders with respect to providing and visualizing the “right” information for decision-making tasks. We investigate the collaborative decision-making process in an experiment with master students using professional EAM tools by developing a research study and accomplishing them in a master’s level class with students.
Current approaches for enterprise architecture lack analytical instruments for cyclic evaluations of business and system architectures in real business enterprise system environments. This impedes the broad use of enterprise architecture methodologies. Furthermore, the permanent evolution of systems desynchronizes quickly model representation and reality. Therefore we are introducing an approach for complementing the existing top-down approach for the creation of enterprise architecture with a bottom approach. Enterprise Architecture Analytics uses the architectural information contained in many infrastructures to provide architectural information. By applying Big Data technologies it is possible to exploit this information and to create architectural information. That means, Enterprise Architectures may be discovered, analyzed and optimized using analytics. The increased availability of architectural data also improves the possibilities to verify the compliance of Enterprise Architectures. Architectural decisions are linked to clustered architecture artifacts and categories according to a holistic EAM Reference Architecture with specific architecture metamodels. A special suited EAM Maturity Framework provides the base for systematic and analytics supported assessments of architecture capabilities.
In der Mikroelektronik werden Chips häufig in Mold-Gehäusen verpackt. Die elektrischen Verbindungen vom Chip zu den Anschlussbeinchen des Gehäuses werden mit Bonddrähten realisiert. Für die Berechnung der Gleichgewichtstemperatur in einem Bonddraht bei konstantem Strom sowie von Temperaturverläufen bei transienten Strömen ist die herkömmliche FEM-Methode langsam und unhandlich. Daher wurde der Bondrechner entwickelt, der ein zylindersymmetrisches Ersatz-Modell für das Package in geeigneten mathematischen Gleichungen abbildet.
Im Gegensatz zum Bondrechner der ersten Generation [1], der auf den Gleichungen von [2] basiert, bietet ein neuer mathematischer Ansatz die Möglichkeit, eine endliche effektive Package-Größe, sowie einen endlichen Wärmeübergang zwischen Bonddraht und Mold-Masse zu berücksichtigen. Ebenso wurde die Berechnung der Interaktion von mehreren benachbarten Drähten verfeinert. Die Berechnung von beliebigen transienten Pulsformen mittlerer Länge wurde ebenfalls verbessert. Eine quadratische Komponente in der Temperaturabhängigkeit des spezifischen Widerstandes des Drahtmaterials kann jetzt ebenfalls berücksichtigt werden.
Die Ergebnisse wurden erfolgreich mit FEM-Berechnungen verglichen und die Geschwindigkeit der Berechnung ist um Größenordnungen schneller als mit kommerziellen FEM-Programmen.
Durch schnell schaltende Leistungsendstufen werden durch kapazitive Umladeströme Störungen ins Substrat und in empfindliche Schaltungselemente eingekoppelt, die dort zur Störung der Funktion führen können. In dieser Arbeit werden Substratstrukturen zur gezielten Ableitung dieser Störungen vorgestellt und ihre Wirksamkeit mit Hilfe von Device Simulation evaluiert. Ohne Ableitstrukturen kann eine Potentialanhebung des Substrats bis zu 20 V entstehen. Die Untersuchungen belegen, dass die Potentialanhebung durch p-Typ Guard-Ringe um 75 %, durch leitende Trenches um 88 % sowie durch Rückseitenmetallisierung um nahezu 100 % reduziert werden kann.
Strategy to test mobile apps
(2014)
Nowadays the development of a mobile app implies challenges and difficulties, which have to be faced by mobile app developers. Innovations lead to a rapidly evolving mobile app market, therefore apps should be developed faster and offered in short release cycles to the market. Testing is a decisive activity within the development process that helps to improve the quality of the app. This research paper describes a strategy to test mobile apps that overcomes the challenges that mobile apps confront and permits to test the app in a structural test environment.
The implementation of a web based portal QA solution will lead to a high acceptance of the staff as the usage of commonly known standard software (e.g. web browser) allows intuitive handling. In the daily use a significant simplification of the workflow and Performance enhancement can be achieved by easy access to the check documents. As the data is now saved in a database it can easily be processed and long-term trends can be displayed. Therefore possible errors can be detected much easier and earlier. By the usage of time stamps and user authentication procedures and user responsibilities are comprehensibly documented. As the software is browser based, integration into an existing software Environment is not critical. As only technical QA data is processed, no further data security measures are necessary. A certification as a medical product is not required.
Im präventiven Krisenmanagement geht es um die frühzeitige Erkennung von möglichen, unvorhersehbaren Ereignissen. Hierzu zählen beispielhaft Busunfälle, einstürzende Gebäude und ähnliche Großschadensereignisse. Krisen treten meist unerwartet auf und neigen oftmals aufgrund der knapp bemessenen Handlungszeit zu Fehlentscheidungen. Um dies zu verhindern, dient das präventive Krisenmanagement dazu, sämtliche auftretende Ereignisse mittels einer Simulation zuvor durchzuspielen, um im Falle einer reellen Krise die notwendigen Schritte bestmöglich einzuleiten. Um Simulationen für das Krisenmanagement zu präzisieren und die Ergebnisse effektiv und vereinfacht zu veranschaulichen, ist es notwendig, eine Vorauswahl an vorhandenen Szenarien für Vergleiche heraussuchen zu können. Diese Arbeit entstand im Rahmen des FP-7 EU Projekts CRISMA (Crisis Management) [1] und dient zur Evaluation eines Konzepts zur Vorauswahl geeigneter Szenarien, welche in früheren Simulationen entstanden.
Die sogenannte Systemsimulation, bei der mehrere physikalische Domänen gemeinsam simuliert werden, erlaubt die Analyse komplexer und damit realitätsnaher Systeme und spielt eine zunehmend größere Rolle bei der Auslegung von Komponenten. Enthält das System Teile, die durch Feldgrößen aus unterschiedlichen physikalischen Domänen beschrieben werden müssen, kann man Co-Simulationen einsetzen, die allerdings zeitaufwändig sind. Für die Auslegung des Systems ist es dagegen notwendig, Systemsimulationen schnell durchzuführen zu können. Hierfür können für ausgewählte Bauteile oder Domänen schnellere reduzierte Ersatzmodelle (ROM) eingesetzt werden. In dieser Arbeit stellen wir ein reduziertes Modell für elektromechanische Bauteile mit Berücksichtigung von Wirbelströmen vor. Wirbelstromeffekte hängen nicht nur vom aktuellen Zustand, sondern auch von der Geschichte der elektromagnetischen Domäne ab. Das vorgestellte Ersatzmodell basiert auf Daten, die mit einer Reihe von stationären Feldsimulationen vorab erzeugt werden. Für die Modellierung der geschichtsabhängigen Wirbelstromeffekte wird ein Konvolutionsansatz (Faltungsansatz) verwendet. Vergleiche mit entsprechenden Co-Simulationen in ANSYS Maxwell und Simplorer zeigen am Beispiel eines Hubankers, dass das Ersatzmodell in der Lage ist, die wesentlichen Eigenschaften des Bauteils physikalisch korrekt abzubilden.
Quest 3C : an integrative simulation game used to encourage cross-disciplinary thinking and action
(2014)
Interdisciplinary, complex problem-solving and the necessity to communicate effectively in global Teams characterise today’s rapidly changing Business environment. Employers consistently stress the need for business engineering graduates to demonstrate technical expertise, methodological competences and diverse soft skills. The "silo effect" in higher education has partially created a gap between what industry wants and what academia provides. Here we examine how interdisciplinary team teaching and shared ICT might be more effective in bringing higher education teaching in sync with industry and its demands.
Proceedings of the International Workshop on Mobile Networks for Biometric Data Analysis (mBiDA)
(2014)
Prevention and treatment of common and widesprea (chronic) diseases is a challenge in any modern Society and vitally important for health maintenance in aging societies. Capturing biometric data is a cornerstone for any analysis and Treatment strategy. Latest advances in sensor technology allow accurate data measurement in a non-intrusive way. In many cases, it is necessary to provide online monitoring and real-time data capturing to support patients´ prevention plans or to allow medical professionals to access the current status. Different communication standards are required to push sensor data and to store and analyze them on different (mobile) platforms. The objective of the workshop is to show new and innovative approaches dedicated to biometric data capture and analysis in a non-intrusive way maintaining mobility. Examples can be found in human centered ambient intelligence attributed with sensors or even in methodologies applied in automotive real-time conform mobile system design. The workshop´s main challenge is to focus on approaches promoting non-intrusiveness, reliable prediction algorithms and high user-acceptance. The workshop will provide overview presentations, Young researcher poster tracks, doctoral tracks and classical peer-review full paper tracks. Especially, would like to encourage students and young researchers to participate and to contribute to the workshop. Scientific contributions to the event are peer-reviewed by a suited program committee.
While digital IC design is highly automated, analog circuits are still handcrafted in a time-consuming, manual fashion today. This paper introduces a novel Parameterized Circuit Description Scheme (PCDS) for the development of procedural analog schematic generators as parameterized circuits. Circuit designers themselves can use PCDS to create circuit automatisms which capture valuable expert knowledge, offer full topological flexibility, and enhance the re-use of well-established topologies. The generic PCDS concept has been successfully implemented and employed to create parameterized circuits for a broad range of use cases. The achieved results demonstrate the efficiency of our PCDS approach and the potential of parameterized circuits to increase automation in circuit design, also to benefit physical design by promoting the common schematic-driven-layout flow, and to enhance the applicability of circuit synthesis approaches.
Mit dem starken Wachstum des CarSharing- Angebots und der großen Menge an Flottenfahrzeugen in Unternehmen nimmt auch die Anzahl der Fahrtenbuch-Apps zu. Bei den meisten mobilen Fahrtenbuch- Anwendungen muss der Benutzer den Kilometerstand manuell eintragen. Dies wirkt sich negativ auf die Usability und die User Experience aus. Hinzu kommt, dass jede Minute kostbar ist, die der Fahrer im ausgeliehenen Auto verbringt. Aus diesen Gründen wird hier eine Lösung vorgestellt, bei der der Kilometerstand aus einer Mercedes Benz A-Klasse über den OBD-Anschluss mit Hilfe des CAN Interfaces „ISI b2air“ automatisch ausgelesen und per Bluetooth an die Fahrtenbuch-App der Berger Elektronik GmbH gesendet wird. Hierfür wird mittels der Software „ISI b2app“ die Kommunikation des Diagnosetesters mit dem Fahrzeug aufgezeichnet. Anschließend werden die CAN-Botschaften analysiert und in Bezug auf den Kilometerstand gefiltert. Die entsprechende Anfrage zum Erhalt des Kilometerstandes wird in den Programmcode des Berger Fahrtenbuches implementiert, so dass die App selbstständig den Kilometerstand auslesen kann.
Es wird das Ziel verfolgt, eine Möglichkeit für die sichere Wiederverwendbarkeit von Schaltungen aus der OTA-Schaltungsklasse bereitzustellen. Hierfür werden ausgewählte OTA-Schaltungstopologien für die "Copy-and-Paste"-Methode vorgestellt. Es wurde im industriellen Umfeld gezeigt, dass sie sich unter der Voraussetzung einer repräsentativen Topologieauswahl – vordimensioniert für den typischen Anwendungsbereich – schon in dieser Form für die Wiederverwendung eignen.
Three different polyols (soluble starch, sucrose, and glycerol) were tested for their potential in the chemical modification of melamine formaldehyde (MF) resins for paper impregnation. MF impregnated papers are widely used as finishing materials for engineered wood. These polyols were selected because the presence of multiple hydroxy groups in the molecules was suspected to facilitate cocondensation with the main MF framework. This should lead to good resin performance. Moreover, they are readily produced from natural feedstock. They are available in large quantities and may serve as economically feasible, environmentally harmless alternative co-monomers suitable to substitute a portion of fossil-based starting material. In the presented work, a number of model resins were synthesized and tested for covalent incorporation of the natural polyol into the MF Framework. Spectroscopic evidence of chemical incorporation of glycerol was found by applying by 1H, 13C, 1H/13C HSQC, 1H/13C HMBC, and 1H DOSY methods. It was furthermore found that covalent incorporation of glycerol in the network took place when glycerol was added at different stages during synthesis. Further, all resins were used to prepare decorative laminates and the performance of the novel resins as surface finishing was evaluated using standard technological tests. The technological performance of the various modified thermosetting resins was assessed by determining flow viscosity, molar mass distribution, the storage stability, and in a second step laminating impregnated paper to particle boards and testing the resulting surfaces according to standardized quality tests. In most cases, the average board surface properties were of acceptable quality. Our findings demonstrate the possibility to replace several percent of the petrol-based product melamine by compounds obtained from renewable resources.
An index in a Multi-Version DBMS (MV-DBMS) has to reflect different tuple versions of a single data item. Existing approaches follow the paradigm of logically separating the tuple version data from the data item, e.g. an index is only allowed to return at most one version of a single data item (while it may return multiple data items that match a search criteria). Hence to determine the valid (and therefore visible) tuple version of a data item, the MV-DBMS first fetches all tuple versions that match the search criteria and subsequently filters visible versions using visibility checks. This involves I/O storage accesses to tuple versions that do not have to be fetched. In this vision paper we present the Multi Version Index (MV-IDX) approach that allows index-only visibility checks which significantly reduce the amount of I/O storage accesses as well as the index maintenance overhead. The MV-IDX achieves significantly lower response times and higher transactional throughput on OLTP workloads.
In diesem Beitrag wurde gezeigt, wie ein bereits bekanntes Verfahren zur modellprädiktiven Regelung zur Optimierung der Energieeffizienz einer Asynchronmaschine im dynamischen Betrieb eingesetzt werden kann. Dazu wurden zunächst die Beziehungen für die Verlustleistung bei alleiniger Berücksichtigung der Kupferverluste im dynamischen Betrieb hergeleitet. Ausgehend davon wurde das Optimierungsproblem formuliert, der Einfluss von Parametern des modellprädiktiven Verfahrens auf das Optimierungsergebnis untersucht und damit Vorschlagswerte für diese Parameter ermittelt. Der Vergleich mit zwei weiteren Verfahren ohne Optimierung bzw. mit Optimierung allein für stationäre Arbeitspunkte zeigt die Vorteile des modellprädiktiven Verfahrens.
Many future Services Oriented Architecture (SOA) systems may be pervasive SmartLife applications that provide real-time support for users in everyday tasks and situations. Development of such applications will be challenging, but in this position paper we argue that their ongoing maintenance may be even more so. Ontological modelling of the application may help to ease this burden, but maintainers need to understand a system at many levels, from a broad architectural perspective down to the internals of deployed components. Thus we will need consistent models that span the range of views, from business processes through system architecture to maintainable code. We provide an initial example of such a modelling approach and illustrate its application in a semantic browser to aid in software maintenance tasks.
The purpose of this paper is to review, compare and contrast the body of published literature regarding consumer related emotions in fashion shopping behavior. This paper analyses 39 academic articles which focus on emotions in fashion shopping behavior between 2000 and 2013. Therefore articles which examine the influence of environmental stimuli in a retail setting as well as articles which focus on the impact of factors affecting individuals especially in shopping for fashion were analysed. Most of the articles are based on the SOR paradigm. A larger focus is recently placed on the research of emotions and consumers’ behavior in online fashion environments. The influence of stimuli, occurring in endogenous and exogenous ways, on consumers’ emotion and resulting behavior could be confirmed in most studies. However the determination of addressed emotions is already widely researched, the impact on consumers’ shopping behavior has to be analysed more detailed.
In this paper, research projects with 30 meter balanced cabling and data rates up to 25 Gbps over one single pair are described. The project aim is to achieve 100 Gbps via a four pair balanced cabling channel. In the following, spectral characteristics of the used prototype twisted pair are presented. Therefore, the insertion loss of the single cable in comparison to the insertion loss of the cable in combination with an equalizing amplifier, as well as the group delay of the cable and the cable connected to the equalizing amplifier is shown. Furthermore, a carrierless Pulse Amplitude Modulation with 32 different levels (PAM-32) as an approach for a possible line encoding is presented. Finally, research measurements of the data transmission with a data rate up to 25 Gbps via shielded twisted pair is shown.
Beim Language Oriented Programming (LOP) erstellt der Entwickler eine Programmiersprache, um ein Problem oder eine Aufgabe in einer bestimmten Domäne zu lösen. Dabei wird die Sprache so entwickelt, dass sie das konzeptuelle Modell des Entwicklers ohne Umdenken umsetzen kann. Diese Sprachen nennt man domänenspezifische Sprachen (DSL). Zur Entwicklung dieser Sprachen werden sogenannte Language Workbenches (LWB) verwendet. Diese Arbeit befasst sich mit der Entwicklung von DSLs als ein Mittel zur Umsetzung von LOP. Durch die Nutzung der LWBs kann man DSLs mit relativ kleinem Aufwand erstellen und einsetzen. Im Fokus dieser Arbeit steht die Entwicklung von "Modularen DSLs". Hierbei werden Kriterien und Voraussetzungen für die Modularisierung betrachtet. Zum Abschluss werden drei Konzepte bestehender Systeme anhand dieser Kriterien betrachtet und bewertet.
System- und Schnittstellenbeherrschung, Ideen- und Innovationsmanagement sowie die virtuell integrierte Produkt- und Prozessplanung sind zu entwickelnde Kompetenzen, die der veränderten Rolle des Menschen in der Industrie 4.0 Rechnung tragen. Dezidiert adressiert werden können diese in zukunftsweisend ausgerüsteten Lernfabriken.
Learning and teaching requires the transfer of knowledge from one person to another. Due to the relevance of knowledge many models have been developed for knowledge transfer. However, the process of knowledge transfer has not yet been described completely and the approaches are too vague to facilitate its implementation. This paper contributes to a better understanding of knowledge transfer to support knowledge transfer in teaching. To address this challenge, we depict a layered model for knowledge transfer. The model structures the transfer in several steps and thus identifies major influencing factors. The paper describes the knowledge transfer from one person to another step by step. An example in the area of teaching business process management illuminates the process. The main contribution of this paper is the development of a layered model and its application in teaching.
Die Wahl einer Klinik ist typischerweise dem stellvertretenden Kaufverhalten zuzuordnen – Kunden suchen vertrauenswürdige, persönliche Quellen zur Unterstützung der Entscheidung. Weiterempfehlungsverhalten kann durch Anreize unterstützt werden – grundlegende Voraussetzung für ehrliche Weiterempfehlung ist jedoch Kundenzufriedenheit. Kundenzufriedenheit entsteht durch den Abgleich zwischen erwarteter und empfundener Leistung – das erwartete Leistungsniveau wird häufig durch Unternehmen anderer Branchen determiniert. Individuen sind nicht in der Lage, die Bestandteile einer Erfahrung isoliert zu bewerten, sondern vermengen sie (Halo-Effekt) - Inkonsistenzen führen zu einer Abwertung der Gesamterfahrung. Darum ist im ersten Schritt die Identifikation der Gesamterfahrung (Kundenreise) erforderlich – diese beginnt vor und endet nach der unmittelbaren Interaktion des Kunden mit dem Unternehmen / der Klinik. Im zweiten Schritt sind die Zufriedenheitstreiber und die Interdependenzen zwischen den Einzelerfahrungen zu ermitteln um dann die Optimierung der Kundenreise zu planen und umzusetzen.
Executive education in IS is under the scrutiny of many institution for the potential to bring in financial revenues. However teaching executives can be a very challenging task because of the previous experiences, variation in their previous education, and multiplicity of motivations for pursuing a continuous education. The panel aims at sharing successful experiences and highlighting challenges of dealing with executive audiences. The panel will present the results of a large survey among executive students and identify the three most significant elements emerged from the survey: the importance of theory that is actionable, the importance of varied pedagogical tools and practices, and the importance of relevance beyond practical tools. Based on a survey that will be distributed to the audience at the beginning of the panel, the audience will be actively engaged in sharing their experiences on the three topics aiming at capitalize and sum up the collective knowledge of the room.
Analysis and planning of Enterprise Architectures (EA) is a complex task for stakeholders. The change of one architecture element has impact on multiple other elements because of manifold relationships and interactions between them. The interactive cockpit approach presented in this paper supports stakeholders planning and analyzing EAs and to tackle the intrinsic complexity. This approach supplies a cockpit with multiple viewpoints to put relevant information side-by-side without losing the context combined with interaction functionality. In this paper, we develop such cockpit starting with relevant use cases, describing a potential design based on well-established foundations in EA modeling, and outline an exemplary usage scenario.
The impact of stress of every human being has become a serious problem. Reported impact on persons are a higher rate or health disorders like heart problems, obesity, asthma, diabetes, depressions and many others. An individual in a stressful situation has to deal with altered cognition as well as an affected decision making skill and problem solving. This could lead to a higher risk for accidents in dynamic environments such as automotive. Different papers faced the estimation as well as prediction of drivers’ stress level during driving. Another important question is not only the stress level of the driver himself, but also the influence on and of a group of other drivers in the near area. This paper proposes a system, which determines a group of drivers in a near area as clusters and it derives or computes the individual stress level. This information will be analyzed to generate a stress map, which represents a graphical view about road section with a higher stress influence. Aggregated data can be used to generate navigation routes with a lower stress influence as well as recommend driving behavior to decrease stress influenced driving as well as improve road safety.
Das Motto in diesem Jahr lautet: "Human Centered Computing", als Einstimmung auf den Schwerpunkt unseres neuen Masterprogramms. Human-Centered Computing betrachtet die Anwendung der menschlichen Informationsverarbeitung auf Computersysteme sowie deren nutzerzentrierte Gestaltung. Die Beiträge vertiefen beispielsweise Themen der Mensch-Maschine-Interaktion, nutzerorientierte Softwareentwicklung, kollaborative Umgebungen oder virtuelle Realität.
Industry 4.0 predicts that industrial processes, technological infrastructure and all corresponding Business processes, with the help of information and communication technology (ICT), will advance to integrated, ad-hoc interconnected and decentralized Cyber-Physical Production Systems (CPPS) with real-time capabilities of selfoptimization and adaptability. Considering this change, the human being will remain in a dominant role, because it is not expected that the human factor with its characteristics and capabilities will be substituted entirely by autonomously acting technology in the foreseeable future. The mechanical intelligence, for instance, is limited to the selection of predefined options, while human creativity, flexibility, the ability to learn and to improve are required to design and configure systems, processes and products. Humans have the expertise and experience to analyze, assess and solve - even in exceptional situations. However, the amount of purely manual tasks for shop floor workers will decrease. Their role will change from a manually executing to a proactive preconceiving worker with increased responsibility. Due to the growing degree of digitalization and interconnectedness, also the tasks and responsibilities for planning and design personnel will continuously expand and become more complex. The work in versatile ad-hoc networks with advanced ICT-Tools and assistance systems will lead to increased requirements regarding the knowledge, capability and capacity of the respective employees. The on-going pervasion of IT and emergence of systems with unprecedented complexity specifically require significantly improved capabilities in analysis, abstraction, problem solving and decision making from future labour. Accordingly, the industry is asking for graduates that are educated interdisciplinary and practice-oriented. Some universities already meet these expectations, using learning factories for realistic, action-oriented classes and trainings. Lecturers are confronted with the challenge to identify future job profiles and correlated qualification requirements, especially regarding the conceptualization and implementation of CPPS, and to adapt and enhance their education concepts and methods adequately and consequently. For the new, virtual world of manufacturing a proper understanding of engineering as well as Computer sciences is essential. Industry 4.0 implies this interdisciplinary split. Integrated competencies for product and process planning and design, methodological competencies for systematical idea and innovation management as well as a holistic system and Interface competence will be crucial to achieve interconnection of physical and digital processes and machines. The Vienna University of Technology and the ESB Reutlingen committed to integrate key aspects of Industry 4.0 into their respective learning factories successively. Thus, the students will act as the coordinators of the CPPS and thereby remain in the center of all learning and implementation activities.
Mass-customization is a megatrend that also affects the wood industry. To obtain individually designed laminates in batch size one efficient printing and processing technologies are required. Digital printing was envisaged as it does not depend on highly costly printing cylinders (as used in rotogravure printing) and allows rapid exchange of the printing designs. In the present work, two wellestablished digital printing approaches, the multi-pass and the single-pass technique, were investigated and evaluated for their applicability in decorating engineered wood and low-pressure melamine films. Three different possibilities of implementing digital printing in the decorative laminates manufacturing process were studied: (1) digital printing on coated chipboard and subsequently applying a lacquered top-coat or melamine overlay (designated as “direct printing”, since the LPM was the printing substrate), (2) digital printing on decorative paper which was subsequently impregnated before hot pressing (designated as “indirect printing, variant A”) and (3) digital printing on decorative paper with subsequent interlamination of the paper between impregnated under- and overlay paper layers during the pressing process (designated as “indirect printing, variant B”). Due to various advantages of the resulting cured melamine resin surfaces including a much better technological performance and flexibility in surface texture design, it was decided to industrially further pursue only the indirect digital printing process comprising interlamination and the direct printing process with a melamine overlay-finishing. Basis for the successful trials on production and laboratory scales were the identification of applicable inks (in terms of compatibility with melamine resin) and of appropriate printing paper quality (in terms of impregnation and imprinting ability). After selection and fine tuning of suitable materials, the next challenge to overcome was the initially insufficient bond strength between impregnated overlay and the ink layers which led to unsatisfactory quality of the print appearance and delamination effects. However, the optimization of the pressing program and the development of a modified impregnation procedure for the underlay and overlay papers allowed the successful implementation of digital printing in the production line of our industrial partner FunderMax.
In the powder coating of veneered particle boards the highly reactive hybrid epoxy/polyester powder transparent Drylac 530 Series from TIGER Coatings GmbH & Co. KG, Wels, Austria was used. Curing is accelerated by a mixture of catalysts reaching curing times of 3 min at 150 °C or 5 min at 135 °C which allows for energy and time savings making Drylac Series 530 powder suitable for the coating of temperaturesensitive substrates such as MDF and wood.
Started as a mono-line focused purely on savings, in late 2012 ING Direct Spain was becoming a full-service bank. To this end, the bank had substantially increased its product- and channel-portfolio. ING Direct Spain originally provided "simple", "good value for money" products in an "easy to deal with" way at low cost supported by a direct model. But with the growth in its product portfolio during the previous decade and the ambitious goal of becoming a full-service bank, an increase in complexity seemed inevitable. Like many businesses in the global, digital economy, ING Direct Spain found it needed to decide which complexity created value for its customers and which one not. It also learned that IT can contribute to complexity and/or help manage complexity.
This case offers a close look at challenges of growing a company by increasing product complexity to provide comprehensive yet simple services.
The recent years and especially the Internet have changed the way on how data is stored. We now often store data together with its creation time-stamp. These data sequences potentially enable us to track the change of data over time. This is quite interesting, especially in the e-commerce area, in which classification of a sequence of customer actions, is still a challenging task for data miners. However, before Standard algorithms such as Decision Trees, Neuronal Nets, Naive Bayes or Bayesian Belief Networks can be applied on sequential data, preparations need to be done in order to capture the information stored within the sequences. Therefore, this work presents a systematic approach on how to reveal sequence patterns among data and how to construct powerful features out of the primitive sequence attributes. This is achieved by sequence aggregation and the incorporation of time dimension into the Feature construction step. The proposed algorithm is described in detail and applied on a real life data set, which demonstrates the ability of the proposed algorithm to boost the classification performance of well known data mining algorithms for classification tasks.
Powder coatings provide several advantages over traditional coatings: environmental friendliness, freedom of design, robustness and resistance of surfaces, possibility to seamlessly all-around coating, fast production process, cost-effectiveness. In the last years these benefits of the powder coating technology have been adopted from metal to heat-sensitive natural fibre/ wood based substrates (especially medium density fibre boards- MDF) used for interior furniture applications. Powder coated MDF furniture parts are gaining market share already in the classic furniture applications kitchen, bathroom, living and offices. The acceptance of this product is increasing as reflected by excellent growth rates and an increasing customer base. Current efforts of the powder coating industry to develop new powders with higher reactivity (i.e. lower curing temperatures and shorter curing times; e.g. 120°C/5min) will enable the powder coating of other heat-sensitive substrates like natural fibre composites, wood plastic composites, light weight panels and different plastics in the future. The coating could be applied and cured by the conventional powder coating process (electrostatic application, and melting and curing in an IR-oven) or by a new powder coating procedure based on the in-mould-coating (IMC) technique which is already established in the plastic industry. Extra value could be added in the future by the functional powder toner printing of powder coated substrates using the electrophotographic printing technology, meeting the future demand of both individualization of the furniture part surface by applying functional 3D textures and patterns and individually created coloured images and enabling shorter delivery times for these individualized parts. The paper describes the distinctiveness of powder coating on natural fibre/ wood based substrates, the requirements of the substrate and the coating powder.
This paper presents the design and simulation processes of an Equiangular Spiral Antenna for the extremely high frequencies between 65 GHz and 170 GHz. A new approach for the analysis of the antenna’s electrical parameters is described. This approach is based on formalism proposed by Rumsey to determine the EM field produced by an equiangular spiral antenna. Analytical expressions of the electrical parameters such as the gain or the directivity are then calculated using well sustained mathematical approximations. The comparison of obtained results with those from numerical integration methods shows a good agreement.
An operation room is a stressful work environment. Nevertheless, all involved persons have to work safely as there is no space for making mistakes. To ensure a high level of concentration and seamless interaction, all involved persons have to know their own tasks and tasks of their colleagues. The entire team must work synchronously at all times. However, the operation room (OR) is a noisy environment and the actors have to set their focus on their work. To optimize the overall workflow, a task manager supporting the team was developed. Each actor is equipped with a client terminal showing a summary of their own tasks. Moreover, a big screen displays all tasks of all actors. The architecture is a distributed system based on a communication framework that supports the interaction of all clients with the task manager. A prototype of the task manager and several clients have been developed and implemented. The system represents a proof-of-concept for further development. This paper describes the concept of the task manager.
The Sixth International Conference on Advances in Databases, Knowledge, and Data Applications (DBKDA 2014), held between April 20 - 24, 2014 in Chamonix, France, continued a series of international events covering a large spectrum of topics related to advances in fundamentals on databases, evolution of relation between databases and other domains, data base technologies and content processing, as well as specifics in applications domains databases. Advances in different technologies and domains related to databases triggered substantial improvements for content processing, information indexing, and data, process and knowledge mining. The push came from Web services, artificial intelligence, and agent technologies, as well as from the generalization of the XML adoption. High-speed communications and computations, large storage capacities, and loadbalancing for distributed databases access allow new approaches for content processing with incomplete patterns, advanced ranking algorithms and advanced indexing methods. Evolution on e-business, ehealth and telemedicine, bioinformatics, finance and marketing, geographical positioning systems put pressure on database communities to push the ‘de facto’ methods to support new requirements in terms of scalability, privacy, performance, indexing, and heterogeneity of both content and technology.
Der lokale Bekleidungseinzelhandel steht unter immer stärkerem Konkurrenzdruck durch Versandunternehmen. Zusätzlich bestehen durch gewachsene Architekturen eine Reihe von Wachstumshemmnissen. Daher sollen hier eine Reihe von Ansätzen zur Gestaltung datenzentrierter Unternehmensarchitekturen für den Bekleidungseinzelhandel vorgestellt werden. Sie basieren auf dem Einsatz von RFID zur Gewinnung von Kundenprofilen in den Niederlassungen und dem Einsatz von Big-Data basierten Auswertungs- und Analysemechanismen. Mit den vorgestellten Konzepten ist es Unternehmen des Bekleidungseinzelhandels möglich, ähnlich wie Versandunternehmen, individuelle Ansprachen des Kunden und Angebote zu entwickeln
This paper addresses the following four research questions: 1. How should customer service quality in social media channels be conceptualized on multiple levels? 2. Which aspects of customer service quality are important in enhancing customer satisfaction? 3. What outcomes are effected by customer service quality and customer satisfaction? 4. How effective are customer services delivered through social media channels (as compared to customer services delivered through other channels)?
At Reutlingen University in Germany students from different countries and disciplines can learn business English within the framework of a theatre production. In the "Business English Theatre" they work in an international project team staging a play with a business focus and thus improve both their language, social and professional skills.
Besides the optimisation of the car, energy-efficiency and safety can also be increased by optimising the driving behaviour. Based on this fact, a driving system is in development whose goal is to educate the driver in energy-efficient and safe driving. It monitors the driver, the car and the environment and gives energy-efficiency and safety relevant recommendations. However, the driving system tries not to distract or bother the driver by giving recommendations for example during stressful driving situations or when the driver is not interested in that recommendation. Therefore, the driving system monitors the stress level of the driver as well as the reaction of the driver to a given recommendation and decides whether to give a recommendation or not. This allows to suppress recommendations when needed and, thus, to increase the road safety and the user acceptance of the driving system.
Advanced power semiconductors such as DMOS transistors are key components of modern power electronic systems. Recent discrete and integrated DMOS technologies have very low area-specific on-state resistances so that devices with small sizes can be chosen. However, their power dissipation can sometimes be large, for example in fault conditions, causing the device temperature to rise significantly. This can lead to excessive temperatures, reduced lifetime, and possibly even thermal runaway and subsequent destruction. Therefore, it is required to ensure already in the design phase that the temperature always remains in an acceptable range. This paper will show how self-heating in DMOS transistors can be experimentally determined with high accuracy. Further, it will be discussed how numerical electrothermal simulations can be carried out efficiently, allowing the accurate assessment of self-heating within a few minutes. The presented approach has been successfully verified experimentally for device temperatures exceeding 500 ◦C up to the onset of thermal runaway.